@incollection{FinckhNiedermeier, author = {Finckh, Wolfgang and Niedermeier, Roland}, title = {Example 4: Strengthening a reinforced concrete column by wrapping}, series = {Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples}, booktitle = {Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples}, publisher = {Beuth}, address = {Berlin ; Wien ; Z{\"u}rich}, isbn = {978-3-410-65255-7}, issn = {0171-7197}, pages = {115 -- 125}, subject = {Betonbauteil}, language = {en} } @incollection{FinckhNiedermeierSchmittetal., author = {Finckh, Wolfgang and Niedermeier, Roland and Schmitt, Alexander and Zilch, Konrad}, title = {Beispiel 3: Verst{\"a}rkung eines Plattenbalkens mit aufgeklebten CFK-Lamellen}, series = {Erl{\"a}uterungen und Beispiele zur DAfStb-Richtlinie "Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung"}, booktitle = {Erl{\"a}uterungen und Beispiele zur DAfStb-Richtlinie "Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung"}, editor = {Zilch, Konrad}, publisher = {Beuth}, address = {Berlin}, isbn = {978-3-410-65245-8}, issn = {0171-7197}, pages = {83 -- 108}, subject = {Betonbauteil}, language = {de} } @book{ZilchNiedermeierFinckh, author = {Zilch, Konrad and Niedermeier, Roland and Finckh, Wolfgang}, title = {Querkrafttragf{\"a}higkeit von historisch mit Betonstabstahl bewehrten und mit geklebter Bewehrung biegeverst{\"a}rkten Betonbauteilen}, publisher = {Fraunhofer IRB Verlag}, address = {Stuttgart}, isbn = {978-3-8167-8707-5}, language = {de} } @article{FinckhIgnatiadisNiedermeieretal., author = {Finckh, Wolfgang and Ignatiadis, Anett and Niedermeier, Roland and Wiens, Udo and Zilch, Konrad}, title = {Die neue DAfStb-Richtlinie "Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung" [The new DAfStb-Guideline "Strengthening of concrete structures with adhesive bonded reinforcement"]}, series = {Beton- und Stahlbetonbau}, volume = {107}, journal = {Beton- und Stahlbetonbau}, number = {10}, doi = {10.1002/best.201200047}, pages = {711 -- 715}, abstract = {Die Verst{\"a}rkung von Betonbauteilen mit geklebter Bewehrung wurde in Deutschland bisher alleinig durch allgemeine bauaufsichtliche Zulassungen und Zustimmungen im Einzelfall geregelt. Da sich das Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung immer mehr zur Regelbauweise entwickelt und die europ{\"a}ische Harmonisierung auf diesem Gebiet voranschreitet, wurde ein neues Regelwerk f{\"u}r die Verst{\"a}rkung von Betonbauteilen mit geklebter Bewehrung geschaffen. Dazu haben sich alle von der Themenstellung betroffenen Parteien in einem Unterausschuss des Deutschen Ausschusses f{\"u}r Stahlbeton zusammengefunden und sich in die Formulierung der DAfStb-Richtlinie .Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung. eingebracht. Nach Abschluss des Einspruchsverfahrens und anschließender Notifizierung erscheint die Richtlinie voraussichtlich im September oder Oktober 2012.}, language = {de} } @incollection{KrausObergriesser, author = {Kraus, Michael A. and Obergrießer, Mathias}, title = {Digitale Transformation im Bauwesen - Grundlagen zur k{\"u}nstlichen Intelligenz und deren Anwendung im Wohnungsbau}, series = {Mauerwerk-Kalender 2023: Instandsetzung, Erdbeben, Lehmbau}, volume = {48}, booktitle = {Mauerwerk-Kalender 2023: Instandsetzung, Erdbeben, Lehmbau}, editor = {Brehm, Detleff and Schermer, Eric}, publisher = {Ernst \& Sohn, a Wiley Brand}, address = {Berlin}, isbn = {978-3-433-03374-6}, doi = {10.1002/9783433611142.ch12}, pages = {275 -- 308}, abstract = {Dieser Beitrag f{\"u}hrt die im Mauerwerk-Kalender 2022 begonnene Reihe zur digitalen Transformation der Planung im Bauwesen weiter. Dazu werden mit Hinblick auf die Anwendung im Wohnungsbau zun{\"a}chst relevante Grundlagen der digitalen Transformation des Bauwesens in Abschnitt~2 sowie k{\"u}nstlicher Intelligenz (KI), maschinelles und tiefes Lernen in Abschnitt~3 eingef{\"u}hrt. Insbesondere verfolgt Abschnitt~3 zur KI die Erzielung eines begriff‌lichen und semantischen Verst{\"a}ndnisses verschiedener KI-Algorithmen, Modelle und f{\"u}r das Arbeiten mit Daten, insbesondere f{\"u}r die in Abschnitt~4 und~5 betrachteten Anwendungsbeispiele und Zukunftspotenziale im Wohnungsbau. In Abschnitt~4 werden Anwendungen von KI in den Lebenszyklusphasen eines Immobilienprojekts anhand von Beispielen aufgezeigt. Dabei werden Beispiele zum generativen Design von Wohnungsgrundrissen in fr{\"u}hen Planungsphasen, die Unterst{\"u}tzung von statischen Berechnungen mit KI, der Einsatz von KI im Zuge der Bauausf{\"u}hrung sowie im Betrieb einer Immobilie detaillierter betrachtet. Abgeschlossen wird dieser Beitrag mit einem Ausblick, welcher die Gesamtheit der dargestellten Inhalte betrachtet und bewertet, sodass ein Ableiten von Schlussfolgerungen, Implikationen und Empfehlungen f{\"u}r Forschung und Baupraxis bzgl. der digitalen Transformation und des Einsatzes von KI m{\"o}glich wird.}, language = {de} } @inproceedings{FinckhZilch, author = {Finckh, Wolfgang and Zilch, Konrad}, title = {Comparison of Guidelines for Externally Bonded Reinforcement}, series = {Codes in structural engineering - Developments and needs for international practice ; joint IABSE - fib conference, Dubrovnik, Croatia, May 3 - 5, 2010}, booktitle = {Codes in structural engineering - Developments and needs for international practice ; joint IABSE - fib conference, Dubrovnik, Croatia, May 3 - 5, 2010}, address = {Zagreb}, isbn = {978-9537621087}, language = {en} } @inproceedings{FinckhZilch, author = {Finckh, Wolfgang and Zilch, Konrad}, title = {Influence of member-specific effects the bond force transfer of reinforced concrete strengthened with externally bonded CFRP-strips}, series = {Proceedings of the Fourth International Symposium "Bond in concrete 2012: Bond, Anchorage, Detailing" -Brescia, Italy, 17th - 20th June 2012. Volume 2: Bond in New Materials and Under Severe Conditions}, booktitle = {Proceedings of the Fourth International Symposium "Bond in concrete 2012: Bond, Anchorage, Detailing" -Brescia, Italy, 17th - 20th June 2012. Volume 2: Bond in New Materials and Under Severe Conditions}, publisher = {Publisher creation}, address = {Manerbio}, isbn = {978-88-907078-3-4}, language = {en} } @inproceedings{WeghWagnerGaudlitzetal., author = {Wegh, Niels and Wagner, Marcus and Gaudlitz, Daniel and Finckh, Hermann and Klein, Markus}, title = {Numerical Simulation of Filling Process in Resin Transfer Molding}, series = {13th International Conference on Flow Processes in Composites Materials (FPCM-13), Kyoto, Japan}, booktitle = {13th International Conference on Flow Processes in Composites Materials (FPCM-13), Kyoto, Japan}, language = {en} } @article{ZilchFinckhNiedermeieretal., author = {Zilch, Konrad and Finckh, Wolfgang and Niedermeier, Roland and Wiens, Udo}, title = {DAfStb-Richtlinie: Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung - Teil 1: Bemessung und Konstruktion}, series = {Bauingenieur}, volume = {86}, journal = {Bauingenieur}, number = {5}, publisher = {VDI-Verlag}, pages = {197 -- 206}, language = {de} } @article{ZilchNiedermeierFinckh, author = {Zilch, Konrad and Niedermeier, Roland and Finckh, Wolfgang}, title = {Bauteilspezifische Effekte auf die Verbundkraft{\"u}bertragung von mit aufgeklebten CFK-Lamellen verst{\"a}rkten Betonbauteilen}, series = {Bauingenieur}, volume = {85}, journal = {Bauingenieur}, number = {2}, publisher = {Springer-VDI-Verlag}, pages = {97 -- 104}, language = {de} } @article{FinckhZilch, author = {Finckh, Wolfgang and Zilch, Konrad}, title = {Strengthening and Rehabilitation of Reinforced Concrete Slabs with Carbon-Fiber Reinforced Polymers Using a Refined Bond Model}, series = {Computer-Aided Civil and Infrastructure Engineering}, volume = {27}, journal = {Computer-Aided Civil and Infrastructure Engineering}, number = {5}, publisher = {Wiley}, doi = {10.1111/j.1467-8667.2011.00752.x}, pages = {333 -- 346}, abstract = {Slabs are one of the main load-bearing elements in nearly every structure. Because of additional live loads or modifications of the building structure these slabs often have to be strengthened. Using externally bonded carbon-fiber reinforced polymer (CFRP) strips to strengthen existing concrete structures has become common practice. One of the main failure modes is the loss of the composite action between the concrete and the CFRP strip making the bond force transfer very important. This bond force transfer depends on many parameters including the concrete strength, the ratio between shear force, and bending moment. A new parameter recently discovered by the Technische Universit{\"a}t M{\"u}nchen (TUM) is the deflection of the structural elements themselves. Because of this deflection self-inducted contact pressure occurs. This contact pressure affects a higher bond transfer. The lower effective depth of slabs compared to beams causes higher deflections. In this article, first a few principles on the strengthening with adhesive-bonded CFRP strips and the characteristics of the bond are explained. Then, the basics of the bond force transfer, at the end anchorage and in the rest of the element, are summarized. Based on these essentials, as well as numerous experiments, the change in the bond force transfer at the structural element caused by the curvature is then derived. With these findings, a complete verification concept is presented, which is ideal for computerized calculations. This verification concept is finally compared to several full-scale test results presented in pertinent literature.}, language = {en} } @phdthesis{Finckh, author = {Finckh, Wolfgang}, title = {Einfluss bauteilspezifischer Effekte auf die Bemessung von mit CFK-Lamellen verst{\"a}rkten Stahlbetonbauteilen}, address = {M{\"u}nchen}, abstract = {Die vorliegende Arbeit besch{\"a}ftigt sich mit dem Tragverhalten von mit kohlenstofffaserverst{\"a}rkter Kunststoff Lamellen (CFK-Lamellen) biegeverst{\"a}rkten Betonbauteilen. Ein wesentlicher Fokus dieser Arbeit liegt dabei auf dem Verbundverhalten aufgeklebter CFK-Lamellen und der damit verbundenen Verbundkraft{\"u}bertragung am Bauteil. Dazu werden auf Grundlage von zahlreichen eigenen experimentellen Untersuchungen verschiedene bekannte Modelle miteinander kombiniert und um bauteilspezifische Effekte erweitert. Dadurch kann erstmals ein geschlossenes, realit{\"a}tsnahes sowie vollst{\"a}ndig mechanisch begr{\"u}ndetes Bemessungsmodell f{\"u}r mit aufgeklebten CFK-Lamellen biegeverst{\"a}rkte Betonbauteile angegeben werden. Im Rahmen der Arbeit wird gezeigt, dass das so entwickelte Bemessungsmodell das Tragverhalten von zahlreichen Bauteilversuchen an unterschiedlichen statischen Systemen mit unterschiedlichsten Bauteilabmessungen und Bewehrungsf{\"u}hrungen gut beschreiben kann. Aufbauend auf dem entwickelten Bemessungsmodell werden mithilfe von Simulationen auf der sicheren Seite liegende vereinfachte Ingenieurmodelle f{\"u}r eine schnelle und einfache Bemessung angegeben. Neben der Verbundkraft{\"u}bertragung der aufgeklebten CFK-Lamellen, welche erstmals in Abh{\"a}ngigkeit der Bauteilverformungen und der Querkrafteinfl{\"u}sse beschrieben wird, werden in der Arbeit auch das Querkrafttragverhalten, die Rissbildung sowie die Schnittgr{\"o}ßenumlagerung von mit aufgeklebten und in Schlitze ver- klebten CFK-Lamellen verst{\"a}rkten Betonbauteilen betrachtet. Somit steht mit dieser Arbeit ein vollst{\"a}ndiges Bemessungskonzept f{\"u}r mit CFK-Lamellen biegeverst{\"a}rkten Betonbauteilen unter statischer Belastung zur Verf{\"u}gung.}, language = {de} } @book{ZilchNiedermeierFinckh, author = {Zilch, Konrad and Niedermeier, Roland and Finckh, Wolfgang}, title = {Verankerung von aufgeklebten Stahllaschen im Bereich von Biegemomenten mit wechselnden Vorzeichen}, publisher = {Fraunhofer IRB Verlag}, address = {Stuttgart}, isbn = {978-3-8167-8821-8}, abstract = {Bei durchlaufenden verst{\"a}rkten Stahlbetonkonstruktionen kann es aufgrund der ung{\"u}nstigen Anordnung der Verkehrslasten im Bereich der Verankerung der aufgeklebten Bewehrung zu einem Vorzeichenwechsel des Momentes bei unterschiedlichen Lastf{\"a}llen kommen. Dies f{\"u}hrt dazu, dass die aufgeklebte Verst{\"a}rkung in einem bestimmten Bereich sowohl Zug- wie auch Druckkr{\"a}ften ausgesetzt ist. Im Rahmen dieses Forschungsberichtes werden zun{\"a}chst bisherige Untersuchungen, welche diese Problemstellung tangieren, betrachtet. Darauf aufbauend werden Verbunddruckversuche mit unterschiedlich dicken Stahllaschen durchgef{\"u}hrt, um das Verhalten des Verbundes unter Druckbeanspruchung zu untersuchen. Zur Verifizierung der Versuchsergebnisse sowie zur Erfassung weiterer bauteilspezifischer Effekte werden zwei Versuche an einem Durchlauftr{\"a}ger durchgef{\"u}hrt in welchem die Stahllaschen bis weit in den Druckbereich verankert waren. Aufgrund der durchgef{\"u}hrten experimentellen Untersuchungen werden abschließend Empfehlungen f{\"u}r den Umgang mit dieser Problemstellung in der Bemessung gegeben.}, language = {de} } @book{FingerloosFinckhHochreitheretal., author = {Fingerloos, Frank and Finckh, Wolfgang and Hochreither, Heinrich and Ignatiadis, Anett and Jenisch, Franz-Michael and Landgraf, Markus and Prietz, Frank and Schmitt, Walter and Schuster, Konrad and Schwabach, Enrico}, title = {Verbesserung der Praxistauglichkeit der Baunormen durch pr{\"a}normative Arbeit - Teilantrag 2: Betonbau}, publisher = {Fraunhofer IRB Verlag}, address = {Stuttgart}, language = {de} } @book{ZilchNiedermeierFinckh, author = {Zilch, Konrad and Niedermeier, Roland and Finckh, Wolfgang}, title = {Praxisgerechte Bemessungsans{\"a}tze f{\"u}r das wirtschaftliche Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung}, publisher = {Beuth}, address = {Berlin}, isbn = {978-3-410-65205-2}, subject = {Stahlbetonbauteil}, language = {de} } @book{ZilchNiedermeierFinckh, author = {Zilch, Konrad and Niedermeier, Roland and Finckh, Wolfgang}, title = {Praxisgerechte Bemessungsans{\"a}tze f{\"u}r das wirtschaftliche Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung}, publisher = {Beuth}, address = {Berlin}, isbn = {978-3-410-65202-1}, language = {de} } @article{Schermer, author = {Schermer, Detleff}, title = {Design according to Eurocode 6 in practice}, series = {Mauerwerk}, volume = {21}, journal = {Mauerwerk}, number = {1}, publisher = {Ernst \& Sohn, a Wiley brand}, issn = {1432-3427}, doi = {10.1002/dama.201700719}, abstract = {For the structural design of masonry according to Eurocode 6 with the associated German national annex, the simplified method and the further simplified calculation method in Annex A are available. These procedures provide tools that can be used in practice to design standard cases quickly and easily. One feature of the verification of masonry walls under compressive loading is that no bending moments in the walls have to be determined as part of the determination of section forces and moments since the verification of the load-bearing capacity of the wall is based solely on the acting vertical force. The effects of floor end restraint and buckling are dealt with by simple equations. One new feature of verification according to Eurocode 6 is that the effect of partially supported floors on the load-bearing capacity of the wall can be included directly. The code is compact and simple to use and the further simplified calculation method is predestined for verification by manual calculation.}, language = {en} } @article{Schermer, author = {Schermer, Detleff}, title = {Bemessungsbeispiele - Nachweisf{\"u}hrung nach dem vereinfachten Verfahren}, series = {Mauerwerk}, volume = {18}, journal = {Mauerwerk}, number = {6}, publisher = {Ernst \& Sohn, a Wiley brand}, issn = {1432-3427}, doi = {10.1002/dama.201400638}, pages = {365 -- 370}, abstract = {Die Regelungen im vereinfachten Verfahren von Eurocode 6, Teil 3 [4] mit dem zugeh{\"o}rigen Nationalen Anhang erlauben es, in wenigen Schritten rechnerische Nachweise von Mauerwerksbauteilen durchzuf{\"u}hren. Anhand mehrerer Bauteilnachweise aus der Praxis wird im Folgenden die Nachweisf{\"u}hrung nach dem vereinfachten Verfahren dargestellt. Es ist erkennbar, dass bei Einhaltung der Anforderungen an das vereinfachte Verfahren sich die rechnerische Nachweisf{\"u}hrung sehr einfach gestaltet und der gr{\"o}ßte Zeitaufwand in der Lastermittlung der einzelnen Bauteile liegt. Eine weitere Vereinfachung, die jedoch etwas st{\"a}rkere Einschr{\"a}nkungen des Anwendungsbereiches bedingt, ist durch das im Anhang A angegebene sog. stark vereinfachte Verfahren gegeben.}, language = {de} } @article{SchermerNaglerSchwabe, author = {Schermer, Detleff and Nagler, Florian and Schwabe, Almut}, title = {Arch{\"a}ologisches Haus am Petriplatz - massive Außenwandkonstruktion}, series = {Mauerwerk}, volume = {25}, journal = {Mauerwerk}, number = {4}, publisher = {Ernst \& Sohn, a Wiley Brand}, issn = {1437-1022}, doi = {10.1002/dama.202100010}, pages = {151 -- 155}, abstract = {Petriplatz in Berlin is one of the earliest settlement sites in Berlin dating back to the 12th century. The Archaeological House is currently being built in this area on behalf of the Berlin Senate, which will integrate the finds associated with the site and make them directly accessible to visitors. The above-ground floors will serve as archaeological workshops and collection rooms and will feature a lecture hall. The chosen construction of the seven-storey building adapts to the local boundary conditions: Thus, the foundation is made on piles to minimize the intervention in the site and at the same time to create elements for geothermal energy. The static function as well as the fire protection requirements and the protection against external noise made it necessary to design the supporting structure-solidly in reinforced concrete. As a quasi-monolithic exterior wall structure in the standard area, a new system was developed by means of a load-bearing reinforced concrete inner shell and non-load-bearing infill of highly heat-insulating plane clay brick masonry. In addition to load transfer, particular -attention had to be paid to the issues of crack resistance, -execution and the interaction of concrete and masonry.}, language = {de} } @article{SchermerMeyerLutmanetal., author = {Schermer, Detleff and Meyer, Udo Joachim and Lutman, Marjana and Triller, Petra}, title = {Shear tests on highly thermal insulating clay unit masonry walls with thin layer mortar}, series = {Mauerwerk}, volume = {23}, journal = {Mauerwerk}, number = {3}, publisher = {Ernst \& Sohn}, address = {Berlin}, issn = {1432-3427}, doi = {10.1002/dama.201900007}, pages = {160 -- 169}, abstract = {The paper presents the results of a series of 6 shear tests on full scale highly thermal insulating clay unit masonry walls. The walls consisted of units with large voids filled with mineral wool with a thermal conductivity of lambda= 0,07 W/(m . K). The aim of the investigations was the verification of the in-planeshear resistance of this type of thermal insulating clay unit masonry in addition to the tests reported in [1]. The current design rules for clay unit masonry in DIN EN 1996-1-1/NA are rather conservative compared to the test results for thermal insulating units.}, language = {en} } @book{ZilchNiedermeierFinckh, author = {Zilch, Konrad and Niedermeier, Roland and Finckh, Wolfgang}, title = {Sachstandbericht Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung}, publisher = {Beuth}, address = {Berlin}, isbn = {978-3-410-65193-2}, abstract = {Das nachtr{\"a}gliche Verst{\"a}rken von bestehenden Bauteilen ist eine h{\"a}ufig auftretende Problemstellung, die durch das Aufkleben von zus{\"a}tzlicher Bewehrung gel{\"o}st werden kann. An der Tragweise der geklebten Bewehrung wird seit den 60er Jahren intensiv geforscht. Die erste bauaufsichtliche Zulassung wurde 1979 vom DIBt erteilt. Seit dieser Zeit hat sich die Bauweise in der Praxis etabliert und immer weitere Anwendungsm{\"o}glichkeiten, Materialien und Verfahren wurden entdeckt. An den Forschungsstellen wurden mithilfe von zahlreichen Versuchen immer bessere Modelle f{\"u}r die Tragweise entwickelt. Das Tragverhalten aufgeklebter Bewehrung wird durch den m{\"a}ßigen Verbund zwischen der geklebten Bewehrung und dem Beton bestimmt, was besondere Bemessungsans{\"a}tze n{\"o}tig macht. Im Rahmen der Erstellung dieses Sachstandberichtes wurden zahlreiche Bauteil- und Verbundversuche mit geklebter Bewehrung in einer Datenbank gesammelt. Die g{\"a}ngigen nationalen und internationalen Modelle sowie Bemessungsvorschriften sind in diesem Sachstandbericht nach Themen geordnet aufgelistet und wurden mit den Versuchswerten aus der Datenbank gegengerechnet und verglichen.}, language = {de} } @article{FinckhKipp, author = {Finckh, Wolfgang and Kipp, Sandra}, title = {Erfahrungen bei der Planung und Ausf{\"u}hrung von Ortbetonschachtbaugruben}, series = {Bauingenieur}, volume = {89}, journal = {Bauingenieur}, number = {1}, publisher = {VDI Fachmedien}, pages = {11 -- 19}, abstract = {Im Rahmen der Erstellung und Nutzung von Tunnel und Leitungsbauwerken ist oft eine Planung und Ausf{\"u}hrung von Ortbetonschachtbaugruben notwendig. Diese Ingenieurbauaufgabe erfordert aufgrund der zahlreichen Randbedingungen eine gute Interaktion zwischen Ausf{\"u}hrenden und Planer, um allen Anforderungen aus Statik, Baubetrieb, Vortrieb, Ausbau sowie sp{\"a}terer Nutzung gerecht zu werden. Mit der Auswahl eines geeigneten Bauverfahrens, einer g{\"u}nstigen Geometrie zusammen mit einer realit{\"a}tsnahen Berechnung kann f{\"u}r jede Schachtbaugruben eine optimale sichere und wirtschaftliche L{\"o}sung gefunden werden. Dieser Artikel gibt zahlreiche Hinweise um dieses Optimum zu erreichen.}, language = {de} } @misc{Schermer, author = {Schermer, Detleff}, title = {Mauerwerk-Kalender 2022}, volume = {47}, editor = {Schermer, Detleff and Brehm, Eric}, publisher = {Ernst \& Sohn GmbH}, address = {Berlin}, isbn = {978-3-433-03356-2}, doi = {10.1002/9783433611029}, pages = {654}, subject = {Mauerwerksbau}, language = {de} } @misc{Schermer, author = {Schermer, Detleff}, title = {Mauerwerk-Kalender 2021}, volume = {2021}, editor = {Schermer, Detleff and Brehm, Eric}, edition = {46}, publisher = {Ernst \& Sohn GmbH}, address = {Berlin}, isbn = {978-3-433-03293-0}, doi = {10.1002/9783433610732}, pages = {440}, subject = {Mauerwerksbau}, language = {de} } @article{Schermer, author = {Schermer, Detleff}, title = {Bemessung nach Eurocode 6}, series = {Deutsches Ingenieurblatt / Bauplaner}, journal = {Deutsches Ingenieurblatt / Bauplaner}, number = {9, Supplement}, publisher = {Schiele \& Sch{\"o}n}, address = {Berlin}, issn = {0946-2422}, pages = {14 -- 15}, language = {de} } @article{Schermer, author = {Schermer, Detleff}, title = {Extrem beansprucht - der Sockelbereich monolithischer Wandkonstruktionen}, series = {BauPlaner Special}, journal = {BauPlaner Special}, number = {9}, publisher = {Schiele \& Sch{\"o}n}, address = {Berlin}, pages = {6 -- 7}, language = {de} } @article{Schermer, author = {Schermer, Detleff}, title = {L{\"o}sungen im Bereich Statik}, series = {Deutsches Ingenieurblatt}, volume = {25}, journal = {Deutsches Ingenieurblatt}, number = {10}, publisher = {Schiele \& Sch{\"o}n}, address = {Berlin}, pages = {6 -- 7}, language = {de} } @incollection{FinckhQuantz, author = {Finckh, Wolfgang and Quantz, Hilmar}, title = {Ver{\"a}nderung der Tragstrukturen von historischen Mauerwerksgew{\"o}lben am Beispiel der Erschließung Wilhelmsburg in Ulm}, series = {Mauerwerk-Kalender}, booktitle = {Mauerwerk-Kalender}, publisher = {Ernst\&Sohn, a Wiley brand}, address = {Berlin}, isbn = {978-3-433-03293-0}, doi = {10.1002/9783433610732.ch5}, pages = {163 -- 195}, abstract = {Im Rahmen der horizontalen und vertikalen Erschließung der denkmalgesch{\"u}tzten Wilhelmsburg als Teil der Ulmer Bundesfestung waren erhebliche Eingriffe in die historische Gew{\"o}lbetragstruktur erforderlich. Hierbei mussten die Kr{\"a}fte aus den in sich kurzgeschlossenen Gew{\"o}lbereihen aus gebrochenem Kalksteinmauerwerk umgelagert bzw. umgeleitet werden. In dem Beitrag werden Vorgehensweise, Planung, Berechnungsmethodik und Ausf{\"u}hrung sowie die Besonderheiten bez{\"u}glich der Gestaltungsanforderungen unter Denkmalschutz erl{\"a}utert. Insbesondere wird auf die Berechnungen und Ausf{\"u}hrungen der hier relevanten Bauzust{\"a}nde eingegangen. Auch die spezielleren Anforderungen an die Gr{\"u}ndung der neuen eingebauten Bauteile mit hohen Lasten werden vertieft.}, subject = {Gew{\"o}lbe}, language = {de} } @incollection{ZilchNiedermeierFinckh, author = {Zilch, Konrad and Niedermeier, Roland and Finckh, Wolfgang}, title = {Geklebte Verst{\"a}rkung mit CFK-Lamellen und Stahllaschen}, series = {Beton-Kalender 2021}, booktitle = {Beton-Kalender 2021}, address = {Berlin}, isbn = {978-3-433-03301-2}, doi = {10.1002/9783433610206.ch12}, pages = {1008 -- 1105}, subject = {Lamelle}, language = {de} } @incollection{Schermer, author = {Schermer, Detleff}, title = {Bemessung von Mauerwerk}, series = {Handbuch f{\"u}r Bauingenieure}, volume = {6}, booktitle = {Handbuch f{\"u}r Bauingenieure}, editor = {Zilch, Konrad and Diederichs, Claus J{\"u}rgen and Beckmann, Klaus J. and Gertz, Carsten and Malkwitz, Alexander and Moormann, Christian and Urban, Wilhelm and Valentin, Franz}, publisher = {Springer Fachmedien}, address = {Wiesbaden}, isbn = {978-3-658-21749-5}, doi = {10.1007/978-3-658-21749-5_66-1}, pages = {1 -- 31}, abstract = {Die Bemessung von Mauerwerk deckt neben der Tragf{\"a}higkeit auch den Nachweis der Gebrauchstauglichkeit ab. Im Beitrag werden die Grundanforderungen und Hintergr{\"u}nde der Bemessung von Mauerwerk dargelegt und die L{\"o}sungen nach den aktuellen Vorschriften von Eurocode 6 und dem Nationalen Anhang erl{\"a}utert.}, language = {de} } @article{Schermer, author = {Schermer, Detleff}, title = {The simplified calculation method of DIN EN 1996-3 in practice}, series = {Mauerwerk}, volume = {19}, journal = {Mauerwerk}, number = {6}, publisher = {Wiley}, doi = {10.1002/dama.201500682}, pages = {471 -- 478}, abstract = {The design and detailing of masonry buildings was usually undertaken in the past using the simplified procedure in Section 6 of DIN 1053-1 (1996-11). With the changeover to the new European code, a new procedure has been made available with the simplified calculation method of DIN EN 1996-3, which promises similarly simple and safe handling for the user. The practical implementation of this new code has been underway for some time. The article investigates the standard design cases and explains the innovations and alterations compared to DIN 1053-1.}, language = {en} } @incollection{ObergriesserKraus, author = {Obergrießer, Mathias and Kraus, Michael A.}, title = {Digitale Transformation im Bauwesen - Von der Theorie zur Anwendung}, series = {Mauerwerk-Kalender 2022: Fassadengestaltung, Bauphysik, Innovationen}, volume = {47}, booktitle = {Mauerwerk-Kalender 2022: Fassadengestaltung, Bauphysik, Innovationen}, editor = {Schermer, Detleff and Brehm, Eric}, publisher = {Ernst \& Sohn}, address = {Berlin}, isbn = {978-3-433-03356-2}, doi = {10.1002/9783433611029.ch16}, pages = {499 -- 519}, abstract = {Dieser Beitrag f{\"u}hrt zun{\"a}chst in die digitale Transformation (DT) des Bauwesens und deren wesentliche Methoden wie BIM, digitaler Zwilling etc. ein. Zur Erzielung eines begriff‌lichen und semantischen Verst{\"a}ndnisses werden die Definitionen zudem an Anwendungsbeispielen veranschaulicht. Neben den Gr{\"u}nden f{\"u}r die DT werden der Status quo sowie der Weg vom analogen Planen und Bauen zur Vision „Planen und Bauen~4.0" dargestellt. Kernelemente sind verschiedene Ansatzpunkte, Entscheidungshilfen und Schl{\"u}sse zur Begegnung der technischen und adaptiven Herausforderungen der DT auf Unternehmer‑, aber auch Hochschulniveau. Insbesondere der Faktor Mensch und dessen humane wie technische Kollaborations- und Vernetzungsf{\"a}higkeit wird in diesem Beitrag Rechnung getragen. Abschließend wird neben einer Zusammenfassung der dargestellten Inhalte zudem ein Ausblick f{\"u}r die DT im Bauwesen bis hin zum Einsatz von Robotik und KI f{\"u}r den im n{\"a}chsten Jahr erscheinenden zweiten Teil dieses Beitrags gegeben.}, language = {de} } @incollection{FinckhSchmittZilch, author = {Finckh, Wolfgang and Schmitt, Alexander and Zilch, Konrad}, title = {Example 1: Strengthening a slab with externally bonded CFRP strips}, series = {Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples}, booktitle = {Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples}, publisher = {Beuth}, address = {Berlin ; Wien ; Z{\"u}rich}, isbn = {978-3-410-65255-7}, issn = {0171-7197}, pages = {47 -- 68}, subject = {Betonbauteil}, language = {en} } @inproceedings{Finckh, author = {Finckh, Wolfgang}, title = {Verst{\"a}rken mit geklebter Bewehrung - Sachstand und neue Entwicklungen}, series = {13. M{\"u}nchener Massivbau Seminar 2009}, booktitle = {13. M{\"u}nchener Massivbau Seminar 2009}, editor = {Zilch, Konrad}, publisher = {F{\"o}rderverein Massivbau der TU M{\"u}nchen}, address = {M{\"u}nchen}, pages = {CD-ROM}, language = {de} } @article{Schermer, author = {Schermer, Detleff}, title = {Hybrid testing of masonry structures subjected to seismic loading}, series = {Mauerwerk}, volume = {18}, journal = {Mauerwerk}, number = {3-4}, publisher = {Ernst ; WILEY}, address = {Berlin ; Weinheim}, issn = {1437-1022}, doi = {10.1002/dama.201400625}, pages = {206 -- 212}, abstract = {The combination of experiments and numeric description in a test makes it possible to realistically investigate almost any type of system subjected to dynamic loading without requiring the extremely expensive device of a shaking table. With the numeric approach it is possible to examine the behaviour of even very large and complex structures, thus reducing the experimental investigations to the essential part of the system - for example, bracing masonry walls. This test method has proved to be very helpful, particularly for the investigation of seismic loading, and it allows the synchronous examination of several force and displacement variables (horizontal, vertical, rotational). A new laboratory is presented for the investigation of full-scale building structures up to three storeys high. Die Kombination von Experiment und numerischer Beschreibung innerhalb eines Versuches erlaubt die realit{\"a}tsnahe Untersuchung ann{\"a}hernd beliebiger Systeme unter dynamischen Beanspruchungen, ohne den extrem hohen Aufwand von R{\"u}tteltischen zu erfordern. Durch die Numerik k{\"o}nnen auch sehr große und komplexe Strukturen mit ihrem Verhalten erfasst werden, wobei sich die versuchsm{\"a}ßige Untersuchung auf den maßgebenden Teil des Systems - beispielsweise aussteifende Mauerwerksw{\"a}nde - beschr{\"a}nken kann. Insbesondere f{\"u}r Erdbebenbeanspruchung hat sich die Versuchsmethode sehr gut bew{\"a}hrt und es k{\"o}nnen mehrere Kraft- und Verschiebungsgr{\"o}ßen (horizontal, vertikal, Rotation) synchron behandelt werden. F{\"u}r die Untersuchung an vollmaßst{\"a}blichen Geb{\"a}udestrukturen bis zu drei Geschossen wird ein neues Labor vorgestellt.}, language = {en} } @incollection{ZilchFinckh, author = {Zilch, Konrad and Finckh, Wolfgang}, title = {Mechanischer Hintergrund der Wirkungsweise der aufgeklebten Bewehrung}, series = {Baustoff und Konstruktion - Festschrift zum 60. Geburtstag von Harald Budelmann}, booktitle = {Baustoff und Konstruktion - Festschrift zum 60. Geburtstag von Harald Budelmann}, editor = {Nothnagel, Reinhard and Twelmeier, Heiko}, publisher = {Springer}, address = {Wiesbaden}, isbn = {978-3-642-29572-0}, doi = {10.1007/978-3-642-29573-7_26}, pages = {243 -- 261}, abstract = {Die Wirkungsweise einer aufgeklebten Biegezugverst{\"a}rkung kann aufgrund der umfangreichen Forschung der letzten Jahrzehnte nun gut beschrieben werden. Eine wesentliche Rolle spielt hierbei der Verbund zwischen Beton und aufgeklebter Bewehrung, welcher durch die m{\"a}ßige Zugfestigkeit der oberfl{\"a}chennahen Betonschichten charakterisiert wird. Dieser Aufsatz gibt einen historisch orientierten Abriss der Entwicklung des derzeitigen Kenntnisstands zur mechanischen Beschreibung der Wirkungsweise der aufgeklebten Bewehrung an. Dazu wird zun{\"a}chst auf das Verbundverhalten der aufgeklebten Bewehrung sowie die {\"u}bertragung auf das Bauteil und danach auf den weiteren Einfluss des Verbundes auf das Bauteilverhalten eingegangen.}, language = {de} } @incollection{FinckhSchmittZilch, author = {Finckh, Wolfgang and Schmitt, Alexander and Zilch, Konrad}, title = {Beispiel 2: Verst{\"a}rkung einer Platte mit in Schlitze verklebten CFK-Lamellen}, series = {Erl{\"a}uterungen und Beispiele zur DAfStb-Richtlinie "Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung"}, booktitle = {Erl{\"a}uterungen und Beispiele zur DAfStb-Richtlinie "Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung"}, editor = {Zilch, Konrad}, publisher = {Beuth}, address = {Berlin}, isbn = {978-3-410-65245-8}, issn = {0171-7197}, pages = {65 -- 82}, subject = {Betonbauteil}, language = {de} } @incollection{FinckhSchmittZilch, author = {Finckh, Wolfgang and Schmitt, Alexander and Zilch, Konrad}, title = {Beispiel 1: Verst{\"a}rkung einer Platte mit aufgeklebten CFK-Lamellen}, series = {Erl{\"a}uterungen und Beispiele zur DAfStb-Richtlinie "Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung"}, booktitle = {Erl{\"a}uterungen und Beispiele zur DAfStb-Richtlinie "Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung"}, editor = {Zilch, Konrad}, publisher = {Beuth}, address = {Berlin}, isbn = {978-3-410-65245-8}, issn = {0171-7197}, pages = {45 -- 64}, subject = {Betonbauteil}, language = {de} } @incollection{FinckhNiedermeier, author = {Finckh, Wolfgang and Niedermeier, Roland}, title = {Beispiel 4: Verst{\"a}rkung einer Stahlbetonst{\"u}tze durch Umwicklung}, series = {Erl{\"a}uterungen und Beispiele zur DAfStb-Richtlinie "Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung"}, booktitle = {Erl{\"a}uterungen und Beispiele zur DAfStb-Richtlinie "Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung"}, editor = {Zilch, Konrad}, publisher = {Beuth}, address = {Berlin}, isbn = {978-3-410-65245-8}, issn = {0171-7197}, pages = {109 -- 119}, subject = {Betonbauteil}, language = {de} } @incollection{ZilchFinckh, author = {Zilch, Konrad and Finckh, Wolfgang}, title = {Erweiterung der Verbundmodelle auf eingeschlitzte Bewehrung}, series = {Befestigungstechnik, Bewehrungstechnik und ... Teil 2 : Rolf Eligehausen zum 70. Geburtstag}, booktitle = {Befestigungstechnik, Bewehrungstechnik und ... Teil 2 : Rolf Eligehausen zum 70. Geburtstag}, editor = {Fuchs, Werner}, publisher = {ibidem-Verl.}, address = {Stuttgart}, isbn = {978-3-8982-1208-3}, pages = {577 -- 590}, language = {de} } @incollection{FinckhNiedermeierSchmittetal., author = {Finckh, Wolfgang and Niedermeier, Roland and Schmitt, Alexander and Zilch, Konrad}, title = {Example 3: Strengthening a T-beam with externally bonded CFRP strips}, series = {Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples}, booktitle = {Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples}, publisher = {Beuth}, address = {Berlin ; Wien ; Z{\"u}rich}, isbn = {978-3-410-65255-7}, issn = {0171-7197}, pages = {115 -- 125}, subject = {Betonbauteil}, language = {en} } @incollection{FinckhSchmittZilch, author = {Finckh, Wolfgang and Schmitt, Alexander and Zilch, Konrad}, title = {Example 2: Strengthening a slab with near surface mounted CFRP strips}, series = {Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples}, booktitle = {Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples}, publisher = {Beuth}, address = {Berlin ; Wien ; Z{\"u}rich}, isbn = {978-3-410-65255-7}, issn = {0171-7197}, pages = {69 -- 86}, subject = {Betonbauteil}, language = {en} } @incollection{ZilchNiedermeierFinckh, author = {Zilch, Konrad and Niedermeier, Roland and Finckh, Wolfgang}, title = {Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung - Erl{\"a}uterungen zur DAfStb-Richtlinie}, series = {Beton-Kalender 2013 : Lebensdauer und Instandsetzung, Brandschutz}, booktitle = {Beton-Kalender 2013 : Lebensdauer und Instandsetzung, Brandschutz}, editor = {Bergmeister, Konrad and Fingerloos, Frank and W{\"o}rner, Johann-Dietrich}, publisher = {Ernst \& Sohn}, address = {Berlin}, isbn = {978-3-433-60546-2}, doi = {10.1002/9783433602591.ch6}, pages = {469 -- 552}, language = {de} } @inproceedings{ZilchNiedermeierFinckh, author = {Zilch, Konrad and Niedermeier, Roland and Finckh, Wolfgang}, title = {Guideline for the Performance and Interpretation of Bond Tests on Concrete Specimens with Externally Bonded CFRP Strips}, series = {Proceedings of the 9th International Symposium on Fibre Reinforced Polymers in Reinforced Concrete Structures (FRPRCS-9), 13.07. - 15.07.2009, Sydney, Australia}, booktitle = {Proceedings of the 9th International Symposium on Fibre Reinforced Polymers in Reinforced Concrete Structures (FRPRCS-9), 13.07. - 15.07.2009, Sydney, Australia}, editor = {Oehlers, Deric John and Griffith, Michael C. and Seracino, R.}, publisher = {[Univ ersity of Adelaide]}, address = {[Adelaide]}, isbn = {978-0-9806755-0-4}, language = {en} } @inproceedings{FinckhZilchNiedermeier, author = {Finckh, Wolfgang and Zilch, Konrad and Niedermeier, Roland}, title = {Verst{\"a}rken mit Kohlenstofffaserverbundwerkstoffen}, series = {DAfStb-Forschungskolloquium: Beitr{\"a}ge zum 50. Forschungskolloquium des DAfStb am 8./9. Oktober 2009 an der Technischen Universit{\"a}t M{\"u}nchen}, booktitle = {DAfStb-Forschungskolloquium: Beitr{\"a}ge zum 50. Forschungskolloquium des DAfStb am 8./9. Oktober 2009 an der Technischen Universit{\"a}t M{\"u}nchen}, address = {Berlin}, organization = {Deutscher Ausschuss f{\"u}r Stahlbeton}, pages = {35 -- 44}, language = {de} } @inproceedings{ZilchFinckh, author = {Zilch, Konrad and Finckh, Wolfgang}, title = {Verst{\"a}rkung von Betonkonstruktionen mit CFK-Werkstoffen}, series = {Proceedings / 53. BetonTage : building the future}, booktitle = {Proceedings / 53. BetonTage : building the future}, publisher = {Bauverl.}, address = {G{\"u}tersloh}, pages = {174}, language = {de} } @inproceedings{FinckhZilchEllinger, author = {Finckh, Wolfgang and Zilch, Konrad and Ellinger, Mathias}, title = {Evaluating the bond stress relationship of externally bonded CFRP-strips at the intermediate crack element}, series = {Smart monitoring, assessment and rehabilitation of civil structures : proceedings of SMAR 2011, First Middle East Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Dubai, UAE, 8-10 February 2011 at AUD, American University in Dubai UAE}, booktitle = {Smart monitoring, assessment and rehabilitation of civil structures : proceedings of SMAR 2011, First Middle East Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Dubai, UAE, 8-10 February 2011 at AUD, American University in Dubai UAE}, editor = {Motavalli, Masoud}, edition = {1 CD-ROM}, publisher = {EMPA}, address = {[D{\"u}bendorf]}, isbn = {978-3-905594-58-4}, pages = {1 -- 9}, abstract = {When reinforced concrete is strengthened by using externally bonded CFRP strips it is not sufficient to perform checks just for the end anchorages. The bond forces must be transferred where the load is applied. These bond forces may be transferred by the elements in between flexural cracks which are mainly influenced by the bond behavior of the internal and external reinforcing. Therefore the models which were derived from end anchorage tests must be expanded to include other effects as well. These models were first described theoretically by the differential equation of bond and a bilinear bond stress slippage relationship. To evaluate this theoretically derived relationship numerous experiments on the intermediate crack elements where conducted. In this paper, an evaluation of these experiments in two different ways is shown. The one evaluation is carried out only on the fracture force, the other analysis also takes the slippage occurred in the intermediate crack element tests into account. With both evaluations it can be shown, that besides the previously scheduled bilinear bond approach additional friction effects between the already decoupled fracture surfaces of the bonded strips occur.}, language = {en} } @inproceedings{FinckhZilch, author = {Finckh, Wolfgang and Zilch, Konrad}, title = {Evaluation of the bond behavior at the intermediate crack element with a special test procedure}, series = {Advances in FRP Composites in Civil Engineering : Proceedings of the 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), Sep 27-29, 2010, Beijing, China}, booktitle = {Advances in FRP Composites in Civil Engineering : Proceedings of the 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), Sep 27-29, 2010, Beijing, China}, editor = {Ye, Lieping and Feng, Peng and Yue, Qingrui}, publisher = {Springer}, address = {Berlin ; Heidelberg}, isbn = {978-3-642-17486-5}, doi = {10.1007/978-3-642-17487-2_111}, pages = {517 -- 520}, abstract = {The bond behavior of externally bonded reinforcement is one main parameter for the load bearing capacity of strengthened reinforced concrete structures. Because of the low bond force transfer at the outmost bending crack, the bond forces have also been transferred to elements between the cracks in order to effectively utilize the permissible stress of the CFRP strip. Two different experimental series on the bond behavior on the intermediate crack element were carried out. Small tests on an idealized intermediate crack element were made to evaluate the bond stress increase. In the second series parts of a structural element, which had the length of an intermediate crack element were tested to find out about other effects which only occur in the structural element. Based on these experimental data and the differential equation of the sway bond a new concept for the bond behavior of externally bonded reinforcement has been found out.}, language = {en} } @inproceedings{ZilchNiedermeierFinckh, author = {Zilch, Konrad and Niedermeier, Roland and Finckh, Wolfgang}, title = {New German guideline for strengthening concrete structures with adhesive bonded reinforcement}, series = {Smart monitoring, assessment and rehabilitation of civil structures, Proceedings of SMAR 2011, First Middle East Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Dubai, UAE, 8 - 10 February 2011 at AUD, American University in Dubai UAE}, booktitle = {Smart monitoring, assessment and rehabilitation of civil structures, Proceedings of SMAR 2011, First Middle East Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Dubai, UAE, 8 - 10 February 2011 at AUD, American University in Dubai UAE}, editor = {Motavalli, Masoud}, edition = {1 CD-ROM Ill., graph. Darst. 1 Buch (212 S.)}, publisher = {EMPA}, isbn = {978-3-905594-58-4}, language = {en} } @inproceedings{GlaeserJungSaengFinckh, author = {Gl{\"a}ser, Christian and Jung-Saeng, A. and Finckh, Wolfgang}, title = {Recent developments of spliced segmental griders using enhanced post tensioning systems}, series = {Third international fib congress incorporating the PCI annual convention and bridge conference 2010, May 29-June 2, 2010, Washington, D.C.}, booktitle = {Third international fib congress incorporating the PCI annual convention and bridge conference 2010, May 29-June 2, 2010, Washington, D.C.}, edition = {1 DVD-ROM}, publisher = {Precast/Prestressed Concrete Institute,}, address = {Chicago, IL}, language = {en} } @inproceedings{FinckhZilch, author = {Finckh, Wolfgang and Zilch, Konrad}, title = {Influence of the curvature on the bond force transfer of EBR}, series = {10th International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structures 2011 : Tampa, Florida, USA, 2 - 4 April 2011}, booktitle = {10th International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structures 2011 : Tampa, Florida, USA, 2 - 4 April 2011}, publisher = {Curran}, address = {Red Hook, NY}, isbn = {978-1-61839-203-9}, language = {en} } @inproceedings{FinckhZilchNiedermeier, author = {Finckh, Wolfgang and Zilch, Konrad and Niedermeier, Roland}, title = {DAfStb-Richtlinie: „Verst{\"a}rken von Betonbauteilen mit geklebter Bewehrung -Bemessung}, series = {14. M{\"u}nchener Massivbau Seminar 2010}, booktitle = {14. M{\"u}nchener Massivbau Seminar 2010}, edition = {CD-ROM}, publisher = {F{\"o}rderverein Massivbau der TU M{\"u}nchen e.V.}, address = {M{\"u}nchen}, language = {de} } @incollection{FinckhZilch, author = {Finckh, Wolfgang and Zilch, Konrad}, title = {Specific structural effects on the bond force transfer of reinforced concrete strengthened with externally bonded CFRP-strips}, series = {Building Materials and Building Technology to Preserve the Built Heritage}, booktitle = {Building Materials and Building Technology to Preserve the Built Heritage}, address = {Brno}, isbn = {978-3-937066-21-9}, language = {en} } @inproceedings{Finckh, author = {Finckh, Wolfgang}, title = {Einfluss bauteilspezifischer Effekte auf die Bemessung von mit CFK-Lamellen verst{\"a}rkten Stahlbetonbauteilen}, series = {Beitr{\"a}ge zum Doktorandensymposium 2010, 51. Forschungskolloquium des DAfStb, 11.-12.11.2010, TU Kaiserslautern}, booktitle = {Beitr{\"a}ge zum Doktorandensymposium 2010, 51. Forschungskolloquium des DAfStb, 11.-12.11.2010, TU Kaiserslautern}, publisher = {Deutscher Auschuss f{\"u}r Stahlbeton}, language = {de} } @inproceedings{FinckhZilch, author = {Finckh, Wolfgang and Zilch, Konrad}, title = {Strengthening and rehabilitation of reinforced concrete slabs with CFRP}, series = {International conference on high rise towers and tall building 2010, April 14-16, Munich}, booktitle = {International conference on high rise towers and tall building 2010, April 14-16, Munich}, address = {M{\"u}nchen}, language = {en} } @inproceedings{Finckh, author = {Finckh, Wolfgang}, title = {EN 1992-1-1 Chapter 7.3: Crack Control - PRB Suggestions for Improvement}, series = {Proceedings of the First PRB-Workshop on Contributions for the Ease of Use of the Eurocodes, 4th and 5th December 2014, Berlin}, booktitle = {Proceedings of the First PRB-Workshop on Contributions for the Ease of Use of the Eurocodes, 4th and 5th December 2014, Berlin}, publisher = {Praxisgerechte Regelwerke im Bauwesen e.V.}, address = {Berlin}, isbn = {978-3-410-25201-6}, pages = {79 -- 80}, language = {en} } @inproceedings{FinckhZilch, author = {Finckh, Wolfgang and Zilch, Konrad}, title = {Practical-Orientated Full-Scale Tests In Comparison With Bond Checks of Different Guidelines}, series = {The Third Asia-Pacific Conference on FRP in Structures (APFIS2012), 2 to 4 February 2012, Sapporo, Japan}, booktitle = {The Third Asia-Pacific Conference on FRP in Structures (APFIS2012), 2 to 4 February 2012, Sapporo, Japan}, address = {Sapporo}, language = {en} } @inproceedings{FinckhZilch, author = {Finckh, Wolfgang and Zilch, Konrad}, title = {Specific structural effects by strengthening pre-stressed concrete beams with externally bonded FRP}, series = {6th International Conference on FRP Composites in Civil Engineering; CICE 2012 Rome ; 13-15 June}, booktitle = {6th International Conference on FRP Composites in Civil Engineering; CICE 2012 Rome ; 13-15 June}, publisher = {Sapienza Universita de Roma}, address = {Rom}, language = {en} } @inproceedings{FinckhZilch, author = {Finckh, Wolfgang and Zilch, Konrad}, title = {Influence of shear crack offsets on the bond behavior of EBR at the intermediate crack element}, series = {6th International Conference on FRP Composites in Civil Engineering : CICE 2012 Rome ; 13-15 June}, booktitle = {6th International Conference on FRP Composites in Civil Engineering : CICE 2012 Rome ; 13-15 June}, edition = {CD-ROM}, publisher = {Sapienza Universita de Roma}, address = {Rom}, language = {en} } @misc{Schermer, author = {Schermer, Detleff}, title = {Mauerwerk-Kalender 2023}, editor = {Schermer, Detleff and Brehm, Eric}, edition = {48. Jahrgang}, publisher = {Ernst \& Sohn GmbH}, address = {Berlin}, isbn = {978-3-433-03374-6}, language = {de} } @incollection{ZilchFinckh, author = {Zilch, Konrad and Finckh, Wolfgang}, title = {Erweiterung der Verbundmodelle auf eingeschlitzte CFK-Bewehrung}, series = {Befestigungstechnik, Bewehrungstechnik und …}, booktitle = {Befestigungstechnik, Bewehrungstechnik und …}, publisher = {ibidem}, address = {Stuttgart}, isbn = {978-3-8982-1208-3}, language = {de} } @book{Finckh, author = {Finckh, Wolfgang}, title = {Stahlbetonkonstruktion 2}, publisher = {Springer Fachmedien Wiesbaden}, address = {Wiesbaden}, isbn = {9783658449605}, issn = {2524-8693}, doi = {10.1007/978-3-658-44961-2}, pages = {XI, 389}, abstract = {Aufbauend auf dem ersten Teil „Stahlbetonkonstruktion" werden in diesem Teil erweiterte Grundlagen der Stahlbetonberechnung erl{\"a}utert. Neben den Torsionsnachweisen, dem genaueren Verfahren zur Durchbiegeberechnung und den Schnittgr{\"o}ßenumlagerungen werden vor allem besonders h{\"a}ufig vorkommende Stahlbetonbauteile behandelt. Zu diesen Bauteilen z{\"a}hlen Aussteifungssysteme, Bodenplatten, Fundamente, liniengelagerte Platten sowie Elementdecken. Hierbei werden bei diesen Bauteilen, welche nahezu in jedem Bauwerk vorkommen, sowohl die Ermittlung der Schnittgr{\"o}ßen wie auch die Bemessung und konstruktive Durchbildung erkl{\"a}rt. Zus{\"a}tzlich wird in diesem Lehrbuch auch die Bemessung des Werkstoffes Stahlfaserbeton, welcher insbesondere bei Bodenplatten im Industriebau verwendet wird, erl{\"a}utert. Die im Lehrbuch vorgestellten theoretischen Grundlagen werden anhand zahlreicher Abbildungen verdeutlicht. In jedem Kapitel sind zum besseren Verst{\"a}ndnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. Nach der erfolgreichen Lekt{\"u}re des ersten Bandes der Reihe „Stahlbetonkonstruktion" wird in diesem zweiten Band das Wissen gefestigt und stark erweitert. Dies erm{\"o}glicht dem Lesenden einen sicheren Umgang mit dem Werkstoff Stahlbeton.}, language = {de} } @book{Finckh, author = {Finckh, Wolfgang}, title = {Verst{\"a}rken von Betonbauteilen}, publisher = {Springer Fachmedien Wiesbaden}, address = {Wiesbaden}, isbn = {9783658458560}, issn = {2524-8693}, doi = {10.1007/978-3-658-45857-7}, pages = {XIV, 490}, abstract = {Dieses Lehrbuch widmet sich dem Bauen im Bestand mit Betonbauteilen und den dabei h{\"a}ufig vorkommenden Verst{\"a}rkungsmaßnahmen. Dazu wird zun{\"a}chst das Sicherheitskonzept bestehender Bauteile erl{\"a}utert. Darauf aufbauend wird die Analyse der Bestandsmaterialien und das Vorgehen bei einer Analyse des Tragverhaltens des Bestandsbauteils bzw. einer Nachrechnung behandelt. Die weiteren Kapitel des Buches besch{\"a}ftigen sich mit dem Verst{\"a}rken der bestehenden Betonbauteile. Hierbei werden alle g{\"a}ngigen Verst{\"a}rkungen im Stahlbetonbau, wie das Verst{\"a}rken mit geklebter Bewehrung, Carbonbeton, Betonschrauben und das Verst{\"a}rken mittels Auf- und Spritzbeton, erkl{\"a}rt. Dabei werden bei allen Verfahren die Gemeinsamkeiten, die Unterschiede sowie die sinnvollsten Anwendungsgebiete herausgearbeitet. Die theoretischen Grundlagen werden anhand zahlreicher Abbildungen verdeutlicht. In jedem Kapitel sind zum besseren Verst{\"a}ndnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. Die erfolgreiche Lekt{\"u}re dieses Buches erm{\"o}glicht dem Lesenden, sich den tragwerksplanerischen Aufgaben von bestehenden Betonbauwerken zu stellen und Verst{\"a}rkungsmaßnahmen zu berechnen.}, language = {de} } @book{Finckh, author = {Finckh, Wolfgang}, title = {Mit Stabwerkmodellen zur Bewehrungsf{\"u}hrung: Detailnachweise im Stahlbetonbau}, publisher = {Springer Fachmedien}, address = {Wiesbaden}, isbn = {978-3-658-40881-7}, doi = {10.1007/978-3-658-40882-4}, pages = {XIII, 393}, abstract = {Aufbauend auf den Grundlagen des Stahlbetonbaus wird in diesem Lehrbuch das Konzept der Bemessung von Stahlbetonkonstruktionen mittels Stabwerkmodellen erl{\"a}utert. Dieses Bemessungskonzept wird insbesondere im Bereich der Detailnachweise und bei gedrungenen Tragwerken im Stahlbetonbau ben{\"o}tigt. Neben der generellen Modellbildung und Nachweismethodik werden auch die {\"u}blichen Modelle und Nachweise f{\"u}r h{\"a}ufig vorkommende Details vorgestellt. Hierbei werden insbesondere Krafteinleitungsbereiche, Konsolen, ausgeklinkte Auflager, Rahmenknoten, Querschnittsspr{\"u}nge, Tr{\"a}ger{\"o}ffnungen und Wandartige Tr{\"a}ger detailliert behandelt. Die im Lehrbuch vorgestellten theoretische Grundlagen werden anhand zahlreicher Abbildungen erl{\"a}uterten. In jedem Kapitel sind zum besseren Verst{\"a}ndnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten.}, language = {de} } @book{Finckh, author = {Finckh, Wolfgang}, title = {Stahlbetonkonstruktion}, publisher = {Springer Fachmedien}, address = {Wiesbaden}, isbn = {978-3-658-41336-1}, doi = {10.1007/978-3-658-41336-1}, pages = {XIII, 443}, abstract = {Die Grundlagen der Berechnung von Stahlbetonbauteilen werden in diesem Lehrbuch anhand der mechanischen Beziehungen erl{\"a}utert. Ausgehend von den Nachweisen f{\"u}r Biegung und Querkraft werden auch die Berechnungen f{\"u}r die im Hochbau {\"u}blichen Stahlbetonbauteile, wie Balken, Platten, St{\"u}tzen und Flachdecken erarbeitet. Neben den Nachweisen f{\"u}r Trag- und Gebrauchstauglichkeit werden aufbauend auf den Bemessungsergebnissen die Konstruktionsregeln und Bewehrungsf{\"u}hrungen umfangreich dargestellt. Die im Lehrbuch vorgestellten theoretischen Grundlagen werden anhand zahlreicher Abbildungen erl{\"a}utert. In jedem Kapitel sind zum besseren Verst{\"a}ndnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. Um die LeserInnen f{\"u}r die Baupraxis vorzubereiten, werden auch die Erstellung von statischen Berechnungen, Schalpl{\"a}nen und von Bewehrungspl{\"a}nen behandelt. Damit wird f{\"u}r den Hochbau eine umfassende Basis des Stahlbetonbaus vermittelt, welche einen erfolgreichen Start ins Berufsleben gew{\"a}hrleistet.}, language = {de} } @misc{Schermer, author = {Schermer, Detleff}, title = {Test set-up and proposed testing procedure for the determination of masonry walls under in-plane shear loadings : Brick and Block Masonry: Trends, Innovations and Challenges}, series = {Proceedings of the 16th International Brick and Block Masonry Conference (IMAC), Padova, Italy, 26-30 June 2016}, journal = {Proceedings of the 16th International Brick and Block Masonry Conference (IMAC), Padova, Italy, 26-30 June 2016}, publisher = {Routledge}, pages = {1883 -- 1888}, language = {en} } @article{SchermerMeyerLutmanetal., author = {Schermer, Detleff and Meyer, Udo Joachim and Lutman, Marjana and Triller, Petra}, title = {Shear tests on full scale storey-height specimens constructed with thermally insulating clay unit masonry with thin-layer mortar}, series = {Mauerwerk}, volume = {23}, journal = {Mauerwerk}, number = {6}, publisher = {Ernst \& Sohn}, issn = {1432-3427}, doi = {10.1002/dama.201900025}, pages = {378 -- 386}, abstract = {The paper presents results of a series of 6 in-plane shear tests on storey-height clay unit masonry panels [1] with thin-layer mortar, carried out in addition to previous test campaigns [2], [3], and [4]. The walls were constructed with unfilled thermally insulating clay units with a thermal conductivity of lambda = 0.09 W/(m . K). The current design rules for clay unit masonry according to DIN EN 1996-1-1/NA [5] are conservative compared to the presented test results for thermally insulating clay unit masonry.}, language = {en} } @article{SchermerSchmalzMeyeretal., author = {Schermer, Detleff and Schmalz, Jonathan and Meyer, Udo Joachim and Gams, Matija and Lutman, Marjana and Triller, Petra}, title = {Shear tests on thermal insulating clay unit masonry walls with thin layer mortar}, series = {Mauerwerk}, volume = {22}, journal = {Mauerwerk}, number = {6}, publisher = {Ernst \& Sohn, a Wiley brand}, doi = {10.1002/dama.201800028}, pages = {385 -- 398}, abstract = {The paper presents the results of 20 shear tests on full scale thermal insulating clay unit masonry walls. The types of units used (units with large chambers filled with mineral wool pads and units with small corings filled with mineral wool granulate) as well as the tested wall geometries and vertical loads are representative of the most common wall constructions currently used in housing in Germany. The aim of the investigations was the verification of the shear -resistance of thermal insulating clay unit masonry under realistic conditions and comparison with the design rules in the codes and national technical approvals. The current design rules for clay unit masonry in DIN EN 1996-1-1/NA are rather conservative compared to the test results for thermal insulating units.}, language = {en} } @incollection{Schermer, author = {Schermer, Detleff}, title = {Bemessung von Mauerwerk}, series = {Konstruktiver Ingenieurbau und Hochbau: Technik, Organisation, Wirtschaftlichkeit.}, booktitle = {Konstruktiver Ingenieurbau und Hochbau: Technik, Organisation, Wirtschaftlichkeit.}, editor = {Zilch, Konrad}, publisher = {Springer Fachmedien}, address = {Wiesbaden}, isbn = {978-3-658-29498-4}, doi = {10.1007/978-3-658-29498-4_66}, pages = {443 -- 473}, abstract = {Die Bemessung von Mauerwerk deckt neben der Tragf{\"a}higkeit auch den Nachweis der Gebrauchstauglichkeit ab. Im Beitrag werden die Grundanforderungen und Hintergr{\"u}nde der Bemessung von Mauerwerk dargelegt und die L{\"o}sungen nach den aktuellen Vorschriften von Eurocode 6 und dem Nationalen Anhang erl{\"a}utert.}, language = {de} } @inproceedings{FinckhZilch, author = {Finckh, Wolfgang and Zilch, Konrad}, title = {Shear capacity of flexural strengthened reinforced concrete structures with CFRP materials}, series = {Advances in FRP Composites in Civil Engineering - Proceedings of the 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), Sep 27-29, 2010, Beijing, China}, booktitle = {Advances in FRP Composites in Civil Engineering - Proceedings of the 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), Sep 27-29, 2010, Beijing, China}, editor = {Ye, Lieping and Feng, Peng and Yue, Qingrui}, publisher = {Springer}, address = {Berlin ; Heidelberg}, isbn = {978-3-642-17486-5}, doi = {10.1007/978-3-642-17487-2_175}, abstract = {By enlarging the flexural capacity of reinforced concrete structures with externally bonded CRFP materials the shear behavior is also affected. To evaluate this effect shear tests on flexural strengthened reinforced concrete beams were carried out. Half of the tests were done with externally bonded CFRP-strips and the other half with near surface mounted reinforcement. Based on these tests and the EC2 approach for the shear force was checked.}, language = {en} } @misc{MeissnerSchermerAmbergeretal., author = {Meißner, Jonathan and Schermer, Detleff and Amberger, Franziska and Hofmann, Philipp}, title = {Eccentric partial compression tests on wall test specimens}, series = {18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham}, volume = {2025}, journal = {18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham}, editor = {Milani, Gabriele and Ghiassi, Bahman}, publisher = {Springer}, isbn = {978-3-031-73309-3}, doi = {10.1007/978-3-031-73310-9_16}, pages = {223 -- 238}, abstract = {Within the scope of this work, the objective was to transfer the stress situations resulting at the exterior wall-floor joint as partial area loads to wall test specimens. The actual load-bearing capacities of highly thermally insulating plane clay unit masonry are to be quantified and compared with the calculated load-bearing capacities based on the unconfined stress-strain relationship and the linear-elastic, quasi-ductile and rigid-plastic material behaviour. In order to record also the deformations and compression at cross-section level directly in the load application area as well as the curvatures at system level, the deformations of all test specimens are documented by means of optical deformation measurement (digital image correlation). In this way, not only the load-bearing capacity but also, in particular, the stress resp. Strain distribution and stress redistributions as well as the experimental moment-curvature relationship can be quantified for the further analytical considerations and evaluations. Accordingly, it can be determined for all eccentric partial area loads that, regardless of the loading situation, higher load bearing capacities are achieved both compared to the calculated bearing capacity and based on a rigid-plastic material behaviour. Especially in the case of the loading situation at the bottom of the walls with partially supported floors, the activation of the unloaded cross-sectional zone at the load transfer can be shown very well based on the photogrammetrically determined cross-sectional compression. The decoupling initiated by the local discontinuity of the stress-strain state occurs only after the rigid-plastic cross-sectional bearing capacity is reached.}, language = {en} } @inproceedings{HofmannSchermerAmbergeretal., author = {Hofmann, Philipp and Schermer, Detleff and Amberger, Franziska and Meißner, Jonathan}, title = {Experimental investigation at the exterior wall-floor joint with partially supported slabs}, series = {18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham}, booktitle = {18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham}, editor = {Ghiassi, Bahman and Milani, Gabriele}, publisher = {Springer}, address = {Cham}, isbn = {978-3-031-73309-3}, doi = {10.1007/978-3-031-73310-9_18}, pages = {254 -- 265}, abstract = {The objective of the extensive experimental investigations at the exterior wall-floor joint on a scale of 1:1 on highly thermally insulating clay unit masonry was to record the interaction between the acting axial force and the resulting slab rotation as a result of defined slab fixed end moments. The focus of this test series was on the influence of the nonlinear system behaviour at different axial force-moment combinations caused by the gaping of the horizontal joints as well as the contact zone between slab and masonry. With knowledge of the moment-rotation interaction as a function of the axial force of the wall, a numerical model can be developed with regard to the nonlinear system behaviour. Since the angle of rotation of the slab is of major importance in this respect, the structural design of a reinforced concrete slab is dispensed with in the test and replaced by a flexurally rigid solid steel bracket. This has the decisive advantage that the rotation of the steel bracket can be precisely detected by means of optical deformation measurement (digital image correlation) and directly assigned to the existing axial force-moment combinations. The evaluation of the tests has shown that the dominant nonlinear effect is essentially due to the gaping of the horizontal joints in the exterior wall-floor joint. During the test execution, the proportionality limit between the bracket moment and the bracket rotation could be successively increased with increasing load level regardless of the previous nonlinear system behaviour.}, language = {en} } @inproceedings{MeissnerSchermerAmbergeretal., author = {Meißner, Jonathan and Schermer, Detleff and Amberger, Franziska and Hofmann, Philipp}, title = {Experimental investigations on the influence of eccentric load application on the load bearing capacity of clay unit masonry walls}, series = {18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham}, booktitle = {18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham}, editor = {Milani, Gabriele and Ghiassi, Bahman}, publisher = {Springer}, address = {Cham}, isbn = {978-3-031-73309-3}, doi = {10.1007/978-3-031-73310-9_17}, pages = {239 -- 253}, abstract = {For the analysis of centric and double-eccentric wall compression tests, a comprehensive database of different highly thermally insulating clay unit types is being compiled for the first time. The objective of the analysis is, on the one hand, to characterise the load-deformation behaviour of highly thermally insulating clay unit masonry and, on the other hand, to analyse the resulting stress distribution at the cross-section level. In addition, the influence of the increasing load inclination angle with decreasing test specimen slenderness is also shown. With regard to the wall compression tests under double-eccentric loading, the effects caused by the load inclination become obvious and lead to an average reduction of the load-bearing capacity of 41\% compared to the centric compression tests. Furthermore, an opposite effect can also be observed with regard to the generally known interaction between decreasing specimen slenderness and increasing load-bearing capacity. According to this, lower load-bearing capacities result with constant eccentricity and decreasing slenderness, so that a back calculation to a uniform slenderness ratio with the relevant normalisation functions is not possible. The reason for this is due to the linearly increasing load inclination angle and the resulting increasing shear stress within the transverse webs.}, language = {en} } @inproceedings{SchermerMeissnerAmbergeretal., author = {Schermer, Detleff and Meißner, Jonathan and Amberger, Franziska and Hofmann, Philipp}, title = {Numerical investigation for nonlinear internal forces at the exterior wall-floor joints}, series = {18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham}, booktitle = {18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham}, editor = {Ghiassi, Bahman and Milani, Gabriele}, publisher = {Springer}, address = {Cham}, isbn = {978-3-031-73310-9}, doi = {10.1007/978-3-031-73310-9_19}, pages = {266 -- 279}, abstract = {The objective of the presented work is the analysis of the numerically determined nodal moments at the exterior wall-floor joint compared to the linear-elastic calculation of a frame section according to Annex C of Eurocode 6, Part 1-1 (EN 1996-1-1). The focus of the comparative analysis is the influence of the structural nonlinearity of the exterior wall-floor joint as well as the acting wall axial force, which are explicitly captured in the FE model in contrast to the linear-elastic frame section. In particular, the contact zone is of special importance for partially supported floor and the associated discontinuous stress distribution between the exterior wall and slab. The reason for this is the fact that the transition zone between the masonry wall and the slab behaves in a highly nonlinear manner due to the lack of tensile strength. The related eccentricity e/a required for the ultimate limit state design is thus significantly influenced by the interaction of the axial force and the resulting joint rotations.}, language = {en} } @incollection{Schermer, author = {Schermer, Detleff}, title = {Kapitel 7A: Mauerwerksbau}, series = {Schneider Bautabellen f{\"u}r Ingenieure : mit Berechnungshinweisen und Beispielen}, booktitle = {Schneider Bautabellen f{\"u}r Ingenieure : mit Berechnungshinweisen und Beispielen}, editor = {Albert, Andrej}, edition = {26. aktualisierte Auflage}, publisher = {Reguvis}, address = {K{\"o}ln}, isbn = {978-3-8462-1479-4}, language = {de} } @inproceedings{HofmannSchermerAmbergeretal., author = {Hofmann, Philipp and Schermer, Detleff and Amberger, Franziska and Meißner, Jonathan}, title = {Substitute test method for the local load bearing capacity of masonry with partially supported slabs}, series = {18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham}, booktitle = {18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham}, editor = {Ghiassi, Bahman and Milani, Gabriele}, publisher = {Springer}, address = {Cham}, isbn = {978-3-031-73310-9}, doi = {10.1007/978-3-031-73310-9_21}, pages = {294 -- 307}, abstract = {With increasing thermal insulation requirements and resource-efficient construction methods, demands on building exterior walls are rising. Monolithic exterior walls, devoid of additional insulation, require meticulous planning and execution of the exterior wall-floor joint. Besides addressing building physics, fire safety, and sustainable construction, this detail must meet structural analysis standards. The joint's load-bearing capacity hinges on both the masonry wall and slab loads. Masonry walls primarily bear loads from slabs and roof structures. However, slab loads induce rotation, adding bending stress to the masonry. Bending transmission depends on structural design, material parameters, and axial force, creating parameter interactions. To scrutinize various products and design variants regarding contact stiffness, load distribution, and stress concentrations, the Laboratory for Structural Engineering at the University of Applied Sciences (OTH) in Regensburg, Germany developed specific testing methods. These methods realistically capture load redistribution effects based on perforation patterns and quantify potential loadbearing reserves. Additionally, optimising design regulations based on results can accurately describe masonry's load-deformation behaviour.}, language = {en} } @inproceedings{AmbergerSchermerHofmannetal., author = {Amberger, Franziska and Schermer, Detleff and Hofmann, Philipp and Meißner, Jonathan}, title = {Shear tests on thermal insulating clay unit masonry walls}, series = {18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham}, booktitle = {18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham}, editor = {Ghiassi, Bahman and Milani, Gabriele}, publisher = {Springer}, address = {Cham}, isbn = {978-3-031-73310-9}, doi = {10.1007/978-3-031-73310-9_3}, pages = {31 -- 43}, abstract = {Masonry made of highly insulating clay units is a very common construction method, especially in multi-storey residential buildings. To apply this type of construction also in earthquake proven areas, the characterisation of strength and deformation properties under cyclic horizontal loads is essential. For this, a series of full-scale experimental investigations on the behaviour of walls made of thermally insulating clay unit masonry under combined loadings (N-M-V) were carried out in the Laboratory for Structural Engineering at the University of Applied Sciences Regensburg (OTH), Germany. The aim of the static-cyclic tests was to characterise the load-deformation behaviour and the failure mechanism under earthquake loadings. In conventional buildings, stiffening walls are loaded by vertical axial forces and horizontal in-plane loadings. The interaction with the concrete floor slabs leads to restraining effects in real buildings, which create counteracting bending moments. Accordingly, in the test, the loads were applied by a combined loading of bending moment and axial force. Digital image correlation documented deformations to identify failure mechanism. Results indicate that current design approaches according to DIN EN 1996-1-1 are on the safe side regarding the load-bearing capacity of the tested walls contain load-bearing capacity reserves. Based on the failure patterns from digital image correlation, it can be recognised that a strict separation of the individual failure types does not appear to make sense, as the ultimate failure of the test specimens was caused by a combination of several failure types.}, language = {en} } @incollection{MeissnerSchermerAmbergeretal., author = {Meißner, Jonathan and Schermer, Detleff and Amberger, Franziska and Hofmann, Philipp}, title = {Experimentelle und numerische Untersuchungen am Außenwand-Decken-Knoten}, series = {Mauerwerk-Kalender 2025}, volume = {50}, booktitle = {Mauerwerk-Kalender 2025}, editor = {Schermer, Detleff and Brehm, Eric}, publisher = {Ernst \& Sohn Verlag}, address = {Berlin}, isbn = {978-3-433-03445-3}, doi = {10.1002/9783433612019.ch17}, pages = {367 -- 414}, language = {de} }