@article{Schildgen, author = {Schildgen, Johannes}, title = {Interaktive Vorlesungsfolien mit SQL-Unterst{\"u}tzung}, series = {Datenbank-Spektrum}, volume = {21}, journal = {Datenbank-Spektrum}, number = {1}, publisher = {Springer Nature}, doi = {10.1007/s13222-020-00364-6}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-26059}, pages = {19 -- 27}, abstract = {Mit PowerPoint oder LaTeX Beamer erstellte Vorlesungsfolien sind meist statisch und dienen haupts{\"a}chlich der Pr{\"a}sentation von Lehrinhalten. Als Alternative dazu werden drei Erweiterungen f{\"u}r das HTML- und JavaScript-basierte Pr{\"a}sentationsframework reveal.js vorgestellt, die f{\"u}r mehr Interaktion in der Datenbankenlehre sorgen sollen: (1) Eine Live-Ausf{\"u}hrung von SQL-Anfragen und eine Darstellung des Anfrageergebnisses direkt auf der Folie; mit M{\"o}glichkeit zur Anpassung der Anfrage im Pr{\"a}sentationsbetrieb, (2) eine JSON-basierte Beschreibung von ER-Diagrammen, welche graphisch auf den Folien dargestellt werden sollen und (3) eingebettete Smartphone-Umfragen, um zwischendurch - ohne einen Kontextwechsel - Quiz-Fragen zu stellen.}, language = {de} } @article{MonkmanStrieglPremetal., author = {Monkman, Gareth J. and Striegl, Birgit and Prem, Nina and Sindersberger, Dirk}, title = {Electrical Properties of Magnetoactive Boron-Organo-Silicon Oxide Polymers}, series = {Macromolecular Chemistry and Physics}, volume = {221}, journal = {Macromolecular Chemistry and Physics}, number = {4}, publisher = {Wiley}, doi = {10.1002/macp.201900342}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-26488}, pages = {1 -- 8}, abstract = {The electrical properties of rheopectic magnetoactive composites comprising boron-organo-silicon oxide dielectric matrices containing carbonyl iron microparticles are presented for the first time. The increase in interfacial magnetocapacitance is seen to greatly exceed that experienced when using conventional elastomeric matrices such as polydimethylsiloxane. In addition to the increase in capacitance, a simultaneous and sharp decrease in the parallel electrical resistance over several orders of magnitude is also observed. The effects are time dependent but repeatable. Potential applications include magnetically controlled frequency dependent devices, magnetic sensor systems, weighting elements for neural networks, etc.}, language = {en} } @article{PremSindersbergerMonkman, author = {Prem, Nina and Sindersberger, Dirk and Monkman, Gareth J.}, title = {Infrared spectral analysis of low concentration magnetoactive polymers}, series = {Journal of Applied Polymer Science}, volume = {137}, journal = {Journal of Applied Polymer Science}, number = {7}, publisher = {Wiley}, organization = {WILEY}, issn = {1097-4628}, doi = {10.1002/app.48366}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-25913}, pages = {1 -- 7}, abstract = {This work concerns an area of magnetoactive polymer (MAP) research seldom considered. Traditionally only MAP with high concentrations of magnetic filler (typically between 10 and 90 wt\%) have been investigated. This article deals with a hitherto neglected aspect of research, namely MAP containing lower magnetic filler concentrations (1 to 3 wt\%). This article utilizes a range of spectroscopic analysis methods (Raman and FTIR) and their applicability to MAP characterization at wavelengths ranging from 2.5 to 25 mu m. Particular attention is paid to low carbonyl iron particle (CIP) concentrations in MAP for which the emergence of capillary doublets at a critical 2 wt\% concentration is revealed. This results in measurable magnetic field-dependent changes in IR absorption at a wavelength of 4.255 mu m together with a detectable CO2 susceptibility. (c) 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48366.}, language = {en} } @article{Chow, author = {Chow, Rosan}, title = {Moving forward together}, series = {Strategic Design Research Journal}, volume = {11}, journal = {Strategic Design Research Journal}, number = {2}, publisher = {OJS/PKP}, doi = {10.4013/sdrj.2018.112.14}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-29007}, pages = {167 -- 169}, language = {en} } @article{MuellerRueckJobstetal., author = {M{\"u}ller, Max and R{\"u}ck, Thomas and Jobst, Simon and Pangerl, Jonas and Weigl, Stefan and Bierl, Rudolf and Matysik, Frank-Michael}, title = {An Algorithmic Approach to Compute the Effect of Non-Radiative Relaxation Processes in Photoacoustic Spectroscopy}, series = {Photoacoustics}, volume = {26}, journal = {Photoacoustics}, publisher = {Elsevier}, doi = {10.1016/j.pacs.2022.100371}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-39935}, abstract = {Successful transfer of photoacoustic gas sensors from laboratory to real-life applications requires knowledge about potential cross-sensitivities towards environmental and gas matrix changes. Multi-dimensional calibration in case of cross-sensitivities can become very complex or even unfeasible. To address this challenge, we present a novel algorithm to compute the collision based non-radiative efficiency and phase lag of energy relaxation on a molecular level (CoNRad) for photoacoustic signal calculation. This algorithmic approach allows to calculate the entire elaxation cascade of arbitrarily complex systems, yielding a theoretical photoacoustic signal. In this work the influence of varying bulk compositions, i.e. nitrogen (N2), oxygen (O2) and water (H2O) on the photoacoustic signal during methane (CH4) detection is demonstrated. The applicability of the algorithm to other photoacoustic setups is shown exemplary by applying it to the relaxational system investigated in [1]. Hayden et al. examined the effect of water on photoacoustic carbon monoxide (CO) detection.}, language = {en} } @article{Goertler, author = {G{\"o}rtler, Michael}, title = {Rechtspopulismus als (komplexe) Problemstellung der Sozialen Arbeit}, series = {Soziale Passagen : Journal f{\"u}r Empirie und Theorie Sozialer Arbeit}, volume = {14}, journal = {Soziale Passagen : Journal f{\"u}r Empirie und Theorie Sozialer Arbeit}, publisher = {Springer Nature}, doi = {10.1007/s12592-022-00408-6}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-45323}, pages = {193 -- 199}, abstract = {Dieser Beitrag enth{\"a}lt {\"U}berlegungen zum Rechtspopulismus als (komplexe) Problemstellung der Sozialen Arbeit. Eine theoretisch-reflexive Analyse p{\"a}dagogischer und didaktischer Ans{\"a}tze, eine qualitative Analyse zu Herausforderungen und Bew{\"a}ltigungsstrategien von Fachkr{\"a}ften in der Kinder- und Jugendhilfe sowie eine Analyse aktueller Ver{\"o}ffentlichungen und Stellungnahmen im Kontext des Rechtspopulismus legen die Vermutung nahe, dass sich die Soziale Arbeit aufgrund der Komplexit{\"a}t dieses gesellschaftlichen und politischen Ph{\"a}nomens in einer Suchbewegung befindet.}, language = {de} } @article{GaertnerMarxSchubachGadereretal., author = {G{\"a}rtner, Sebastian and Marx-Schubach, Thomas and Gaderer, Matthias and Schmitz, Gerhard and Sterner, Michael}, title = {Techno-Economic Analysis of Carbon Dioxide Separation for an Innovative Energy Concept towards Low-Emission Glass Melting}, series = {energies}, volume = {16}, journal = {energies}, number = {5}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/en16052140}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-53627}, pages = {1 -- 25}, abstract = {The currently still high fossil energy demand is forcing the glass industry to search for innovative approaches for the reduction in CO2 emissions and the integration of renewable energy sources. In this paper, a novel power-to-methane concept is presented and discussed for this purpose. A special focus is on methods for the required CO2 capture from typical flue gases in the glass industry, which have hardly been explored to date. To close this research gap, process simulation models are developed to investigate post-combustion CO2 capture by absorption processes, followed by a techno-economic evaluation. Due to reduced flue gas volume, the designed CO2 capture plant is found to be much smaller (40 m3 absorber column volume) than absorption-based CO2 separation processes for power plants (12,560 m3 absorber column volume). As there are many options for waste heat utilization in the glass industry, the waste heat required for CO2 desorption can be generated in a particularly efficient and cost-effective way. The resulting CO2 separation costs range between 41 and 42 EUR/t CO2, depending on waste heat utilization for desorption. These costs are below the values of 50-65 EUR/t CO2 for comparable industrial applications. Despite these promising economic results, there are still some technical restrictions in terms of solvent degradation due to the high oxygen content in flue gas compositions. The results of this study point towards parametric studies for approaching these issues, such as the use of secondary and tertiary amines as solvents, or the optimization of operating conditions such as stripper pressure for further cost reductions potential.}, language = {en} } @article{GradNadammalTytkoetal., author = {Grad, Marius and Nadammal, Naresh and Tytko, Darius and Noster, Ulf}, title = {On the nanoindentation behavior of a TiC layer formed through thermo-reactive diffusion during hot pressing of Ti and cast iron}, series = {Materials Letters: X}, volume = {15}, journal = {Materials Letters: X}, number = {September}, publisher = {Elsevier}, address = {Amsterdam, Niederlande}, issn = {2590-1508}, doi = {10.1016/j.mlblux.2022.100161}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-50066}, pages = {1 -- 4}, abstract = {Hot pressing of pure Ti and cast iron under vacuum formed a ~15 μm wide TiC-layer through the thermoreactive diffusion process. Nanoindentation testing of the TiC-layer revealed average hardness and elastic modulus values of ~35 GPa and ~400 GPa, respectively. High-resolution indentation mapping indicated hardness change across the boundary with peak values observed within the TiC-layer. Solid state high temperature diffusion holds significant potential for developing uniform hard coatings on pure Ti/Ti-alloys.}, language = {en} } @article{ZacherlWopperSchwanzeretal., author = {Zacherl, Florian and Wopper, Christoph and Schwanzer, Peter and Rabl, Hans-Peter}, title = {Potential of the Synthetic Fuel Oxymethylene Ether (OME) for the Usage in a Single-Cylinder Non-Road Diesel Engine: Thermodynamics and Emissions}, series = {Energies}, volume = {15}, journal = {Energies}, number = {21}, publisher = {MDPI}, doi = {10.3390/en15217932}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-55350}, pages = {1 -- 26}, abstract = {Non-road sectors, such as agriculture and construction machinery, require high energy densities and flexibility in use, which is why diesel engines are mainly used. The use of climate-neutral fuels, produced from renewable energies, such as Oxymethylene Ether (OME) as a diesel substitute, can significantly reduce CO2 and pollutant emissions in these sectors. In addition to CO2 neutrality, OME also offers improved combustion characteristics compared to diesel fuel, eliminating the soot-NOx trade-off and thus enabling new opportunities in engine design and calibration. In this paper, the combustion of pure OME on a close-to-production, single-cylinder non-road diesel engine with a pump-line-nozzle injection system is analyzed. A variation of the center of combustion at constant power output was performed for diesel and OME at different operating points. Two injectors were investigated with OME. A study on ignition delay and a detailed thermodynamic analysis was carried out. In addition, the exhaust emissions CO, NOx, VOC, as well as particulate-matter, -number and -size distributions were measured. With OME, a significantly shorter ignition delay as well as a shortened combustion duration could be observed, despite a longer injection duration. In addition, the maximum injection pressure increases. VOC and CO emissions are reduced. Particulate matter was reduced by more than 99\% and particle number (>10 nm) was reduced by multiple orders of magnitude. The median of the particle size distribution shifts from 60 to 85 nm (diesel) into a diameter range of sub 23 nm (OME). A significant reduction of NOx emissions with OME enables new degrees of freedom in engine calibration and an efficiency advantage without hardware adaption.}, language = {en} } @article{TroidlSchrollDecker, author = {Troidl, Kilian and Schroll-Decker, Irmgard}, title = {Wie theoriebasiert sind Forschungsbeitr{\"a}ge zur Bildungsbeteiligung? Eine Qualitative Inhaltsanalyse ausgew{\"a}hlter Fachzeitschriften der Erwachsenen- und Weiterbildungsforschung}, series = {Zeitschrift f{\"u}r Weiterbildungsforschung}, volume = {45}, journal = {Zeitschrift f{\"u}r Weiterbildungsforschung}, publisher = {Springer Nature}, doi = {10.1007/s40955-022-00229-3}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-55460}, pages = {19}, abstract = {In der Vergangenheit wurde beklagt, dass in der empirischen Forschung zur Bildungsbeteiligung Erwachsener selten eine Integration von Theorie und Empirie erfolge und die mangelnde empirische Pr{\"u}fung eine theoretische Weiterentwicklung des Forschungsfeldes erschwere. Mittels einer Qualitativen Inhaltsanalyse von Beitr{\"a}gen ausgew{\"a}hlter Fachzeitschriften der Erwachsenen‑/Weiterbildungsforschung wurde versucht, die Aktualit{\"a}t dieser Feststellung empirisch zu {\"u}berpr{\"u}fen. Dazu wurden 38 empirische Forschungsbeitr{\"a}ge zur Bildungsbeteiligung der Jahrg{\"a}nge 2018 bis 2020 von neun Fachzeitschriften mit Peer-Review untersucht. Die Einsch{\"a}tzung der Beitr{\"a}ge erfolgte hinsichtlich des Grades der Theorieeinbindung. Die Ergebnisse der Analyse zeigen ein gemischtes Bild: neun Beitr{\"a}ge (24 \%) binden keine Theorie in den Forschungsprozess ein, ein Beitrag (3 \%) zitiert Theorie lediglich, ohne sie weiter einzubinden. Am h{\"a}ufigsten ist eine Einbindung zum theoriegeleiteten Vorgehen (16 Beitr{\"a}ge, 42 \%). Eine tiefergehende Theorieanwendung findet sich in sechs Beitr{\"a}gen (16 \%). Eine theoriepr{\"u}fende oder -bildende Einbindung liegt mit je drei Beitr{\"a}gen (je 8 \%) seltener vor. Die rezipierten Theorien sind vielf{\"a}ltig: es werden 20 verschiedene Theorieans{\"a}tze festgestellt. Den Forderungen nach einer verst{\"a}rkten Einbindung von Theorie in den Forschungsprozess kann somit weiterhin G{\"u}ltigkeit attestiert werden: ein substanzieller Teil der Beitr{\"a}ge berichtet keine Theorieeinbindung, eine empirische Pr{\"u}fung oder Weiterentwicklung findet relativ selten statt.}, subject = {Erwachsenenbildung}, language = {de} } @article{HaugSchnellScharfetal., author = {Haug, Sonja and Schnell, Rainer and Scharf, Anna and Altenbuchner, Amelie and Weber, Karsten}, title = {Bereitschaft zur Impfung mit einem COVID-19-Vakzin - Risikoeinsch{\"a}tzung, Impferfahrungen und Einstellung zu Behandlungsverfahren}, series = {Pr{\"a}vention und Gesundheitsf{\"o}rderung}, volume = {17}, journal = {Pr{\"a}vention und Gesundheitsf{\"o}rderung}, number = {4}, publisher = {Springer Nature}, doi = {10.1007/s11553-021-00908-y}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-154}, pages = {537 -- 544}, abstract = {Hintergrund Impfungen stellen eine bedeutende Pr{\"a}ventionsmaßnahme dar. Grundlegend f{\"u}r die Eind{\"a}mmung der Coronapandemie mittels Durchimpfung der Gesellschaft ist eine ausgepr{\"a}gte Impfbereitschaft. Ziel der Arbeit Die Impfbereitschaft mit einem COVID‑19-Vakzin (Impfstoff gegen das Coronavirus) und deren Einflussfaktoren werden anhand einer Zufallsstichprobe der Gesamtbev{\"o}lkerung in Deutschland untersucht. Material und Methoden Die Studie basiert auf einer telefonischen Zufallsstichprobe und ber{\"u}cksichtigt {\"a}ltere und vorerkrankte Personen ihrem Bev{\"o}lkerungsanteil entsprechend. Die Ein-Themen-Bev{\"o}lkerungsbefragung zur Impfbereitschaft (n = 2014) wurde im November/Dezember 2020 durchgef{\"u}hrt. Ergebnisse Die Impfbereitschaft in der Stichprobe liegt bei rund 67 \%. Vorerfahrungen mit Impfungen moderieren die Impfbereitschaft. Sie steigt bei Zugeh{\"o}rigkeit zu einer Risikogruppe. Der Glaube an die Wirksamkeit alternativer Heilmethoden und Bef{\"u}rwortung alternativer Behandlungsverfahren geht mit geringerer Impfbereitschaft einher. {\"A}ltere Menschen sind impfbereiter, kovariierend mit ihrer Einsch{\"a}tzung h{\"o}herer Gef{\"a}hrdung bei Erkrankung. Ebenso ist die Ablehnung einer Impfung mit der {\"U}bersch{\"a}tzung von Nebenwirkungen assoziiert. Schlussfolgerung Die Impfbereitschaft h{\"a}ngt mit Impferfahrungen und Einstellungen zu Gesundheitsbehandlungsverfahren allgemein zusammen. Die {\"U}bersch{\"a}tzung der H{\"a}ufigkeit ernsthafter Nebenwirkungen bei Impfungen weist auf weit verbreitete Fehlinformationen hin.}, language = {de} } @article{AltenbuchnerHaugSchnelletal., author = {Altenbuchner, Amelie and Haug, Sonja and Schnell, Rainer and Scharf, Anna and Weber, Karsten}, title = {Impfbereitschaft von Eltern mit einem COVID-19-Vakzin}, series = {P{\"a}diatrie \& P{\"a}dologie. {\"O}sterreichische Zeitschrift f{\"u}r Kinder- \& Jugendheilkunde}, volume = {56}, journal = {P{\"a}diatrie \& P{\"a}dologie. {\"O}sterreichische Zeitschrift f{\"u}r Kinder- \& Jugendheilkunde}, number = {5}, publisher = {Springer Nature}, doi = {10.1007/s00608-021-00925-2}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-196}, pages = {230 -- 234}, abstract = {Hintergrund: Eltern stehen im Rahmen der eigenen Impfung und der Kinderimpfung mit einem COVID-19-Vakzin vor einer Impfentscheidung. Zum aktuellen Zeitpunkt gibt es keine (vollst{\"a}ndige) Impfempfehlung. Fragestellung: Die Studie untersucht die Impfbereitschaft von Eltern minderj{\"a}hriger Kinder und Personen ohne minderj{\"a}hrige Kinder, wobei insbesondere Geschlechtsunterschiede {\"u}berpr{\"u}ft werden. Methoden: Die Studie basiert auf einer Zufallsstichprobe (Telefon-Survey, n = 2014, Erhebung zwischen 12.11.2020 und 10.12.2020). Die Auswertung st{\"u}tzt sich insbesondere auf die Teilstichprobe von Personen mit minderj{\"a}hrigen Kindern im Haushalt (n = 461). Ergebnisse: Eltern weisen durchg{\"a}ngig eine geringere Impfbereitschaft mit einem COVID-19-Vakzin auf als Befragte ohne minderj{\"a}hrige Kinder (54,1 \% vs. 71,1 \%). V{\"a}ter weisen eine st{\"a}rker ausgepr{\"a}gte eigene Impfbereitschaft auf als M{\"u}tter. Dar{\"u}ber hinaus sind M{\"a}nner eher als Frauen bereit, das eigene Kind mit einem COVID-19-Vakzin impfen zu lassen. Schlussfolgerungen: Bei Eltern und insbesondere M{\"u}ttern ist eine erhebliche Fehleinsch{\"a}tzung von Impfrisiken und h{\"a}ufiger Glaube an Impfverschw{\"o}rungstheorien zu beobachten. Empfohlen werden anschauliche und leicht verst{\"a}ndliche Informationen {\"u}ber die Wirkung und Nebenwirkungen der Impfung mit einem COVID-19-Vakzin durch zust{\"a}ndige Institutionen und {\"A}rzte.}, language = {de} } @article{AltenbuchnerHaugWeber, author = {Altenbuchner, Amelie and Haug, Sonja and Weber, Karsten}, title = {Die ersten Schritte nach einer h{\"u}ftnahen Fraktur}, series = {Zeitschrift f{\"u}r Gerontologie und Geriatrie}, volume = {54}, journal = {Zeitschrift f{\"u}r Gerontologie und Geriatrie}, publisher = {Springer Nature}, issn = {0948-6704}, doi = {10.1007/s00391-021-01861-3}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-14251}, pages = {555 -- 560}, abstract = {Nach einer Fraktur ist Mobilisierung Behandlungsziel und Therapies{\"a}ule. Das Festlegen von Outcomes basiert jedoch auf vielen Unsicherheiten, da Assessments nicht f{\"u}r alle Patient/-innen geeignet sind. Sie k{\"o}nnen agesabh{\"a}ngig beeinflusst und subjektiv gepr{\"a}gt sein. Sensorbasiertes Bewegungsmonitoring bietet eine Erg{\"a}nzung zur Operationalisierung der Gehf{\"a}higkeit. F{\"u}r L{\"a}ngsschnittuntersuchungen, die auch im h{\"a}uslichen Umfeld durchgef{\"u}hrt werden, eignet sich die t{\"a}gliche Schrittzahl als Variable. Sie kann durch einen handels{\"u}blichen Fitnesstracker beobachtet werden.}, language = {de} } @article{SchoenbergerScherzingerMauerer, author = {Sch{\"o}nberger, Manuel and Scherzinger, Stefanie and Mauerer, Wolfgang}, title = {Ready to Leap (by Co-Design)? Join Order Optimisation on Quantum Hardware}, series = {Proceedings of the ACM on Management of Data, PACMMOD}, volume = {1}, journal = {Proceedings of the ACM on Management of Data, PACMMOD}, number = {1}, publisher = {ACM}, address = {New York, NY,}, doi = {10.1145/3588946}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-56634}, pages = {1 -- 27}, abstract = {The prospect of achieving computational speedups by exploiting quantum phenomena makes the use of quantum processing units (QPUs) attractive for many algorithmic database problems. Query optimisation, which concerns problems that typically need to explore large search spaces, seems like an ideal match for the known quantum algorithms. We present the first quantum implementation of join ordering, which is one of the most investigated and fundamental query optimisation problems, based on a reformulation to quadratic binary unconstrained optimisation problems. We empirically characterise our method on two state-of-the-art approaches (gate-based quantum computing and quantum annealing), and identify speed-ups compared to the best know classical join ordering approaches for input sizes that can be processed with current quantum annealers. However, we also confirm that limits of early-stage technology are quickly reached. Current QPUs are classified as noisy, intermediate scale quantum computers (NISQ), and are restricted by a variety of limitations that reduce their capabilities as compared to ideal future quantum computers, which prevents us from scaling up problem dimensions and reaching practical utility. To overcome these challenges, our formulation accounts for specific QPU properties and limitations, and allows us to trade between achievable solution quality and possible problem size. In contrast to all prior work on quantum computing for query optimisation and database-related challenges, we go beyond currently available QPUs, and explicitly target the scalability limitations: Using insights gained from numerical simulations and our experimental analysis, we identify key criteria for co-designing QPUs to improve their usefulness for join ordering, and show how even relatively minor physical architectural improvements can result in substantial enhancements. Finally, we outline a path towards practical utility of custom-designed QPUs.}, language = {en} } @article{ThielKratzerGrimmetal., author = {Thiel, Charlotte and Kratzer, Johanna and Grimm, Benedikt and Kr{\"a}nkel, Thomas and Gehlen, Christoph}, title = {Effect of Internal Moisture and Outer Relative Humidity on Concrete Carbonation}, series = {CivilEng}, volume = {4}, journal = {CivilEng}, number = {3}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/civileng3040058}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-56091}, pages = {1039 -- 1052}, abstract = {With steadily rising CO2 concentrations in the ambient air and fast-changing concretecompositions with reduced clinker contents, the availability of reliable and accelerated concrete car-bonation tests is of crucial importance to design durable structures. This paper focuses on the effectsof moisture under accelerated conditions and the effects of different CO2 exposure conditions. Mor-tar prisms incorporating three different cement types were cured and stored at either 50\% or 65\%relative humidity (RH). Afterwards, the prisms were carbonated at different ambient humidities(50, 57 and 65\%), different CO2 concentrations (0.04, 1 and 3 vol.\%) and complemented by a seriesof tests at increased gas pressure (2 barg). High-resolution test methods were used to explain theunderlying carbonation mechanisms. The results show that pre-conditioning for two weeks—ascurrently suggested by the European Standard—seems to be too short because the initial inner mois-ture content severely affects the carbonation rate. Relative humidity during carbonation of 57\% ledto higher carbonation rates compared to 50\% and 65\%. In addition, climate data needs to be period-ically (preferably permanently) recorded in research experiments and in laboratory testing to ensurefair interpretation of experimental results.}, language = {en} } @article{KaessStrahringerWestner, author = {K{\"a}ss, Sebastian and Strahringer, Susanne and Westner, Markus}, title = {Practitioners' Perceptions on the Adoption of Low Code Development Platforms}, series = {IEEE Access}, journal = {IEEE Access}, publisher = {IEEE}, issn = {2169-3536}, doi = {10.1109/ACCESS.2023.3258539}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-59170}, pages = {30}, abstract = {Organizations are under increasing pressure to develop applications within budget and time at high quality. Therefore, multiple organizations adopt Low Code Development Platforms (LCDP) to develop applications faster and cheaper compared to traditional application development. However, current research on LCDP adoption lacks empirical grounding as well as a deeper understanding of the importance of adoption drivers and inhibitors. We conducted semi-structured interviews and a Delphi study with seventeen experts to address these gaps. As a result, we identified twelve drivers and nineteen inhibitors for adopting LCDPs. We show that the experts have a consensus on the most and the least important drivers and inhibitors for LCDP adoption. Yet, the ranking of the drivers and inhibitors between the most and least important is highly context dependent. For some drivers and inhibitors, the experts' ranking is similar to academic literature, whereas, for others, it differs. In conclusion, the study at hand empirically validates drivers and inhibitors for LCDP adoption, adds six new drivers and six new inhibitors to the body of knowledge, and analyses the importance of these factors.}, language = {en} } @article{SchliermannRockSchrollDecker, author = {Schliermann, Rainer and Rock, Jasmin and Schroll-Decker, Irmgard}, title = {Erwerb von sozialer und emotionaler Kompetenz im Bachelorstudium der Sozialen Arbeit: Eine explorative Ann{\"a}herung}, series = {Zeitschrift f{\"u}r Bildungsforschung}, volume = {13}, journal = {Zeitschrift f{\"u}r Bildungsforschung}, number = {1}, publisher = {Springer Nature}, doi = {10.1007/s35834-023-00396-4}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-59260}, pages = {335 -- 350}, language = {de} } @article{DotterHaugWeberetal., author = {Dotter, Caroline and Haug, Sonja and Weber, Karsten and Schnell, Rainer and Scharf, Anna and Altenburcher, Amelie}, title = {Analyzing factors determining vaccination willingness against COVID-19 in Germany 2020}, series = {Vaccine: X}, volume = {14}, journal = {Vaccine: X}, publisher = {Elsevier}, doi = {10.1016/j.jvacx.2023.100342}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-62900}, pages = {6}, abstract = {The study is based on a German single-topic population survey on vaccination willingness against COVID-19 (VWC) by the authors (2020, n = 2014). The single-topic survey allowed us to test several competing explanations for VWC, as discussed in the literature. The VWC in the sample was 67.3\%. Logistic regression was used to identify factors affecting VWC. Being at high risk from COVID-19 and having received flu vaccination have a positive impact on VWC. Perceived VWC of friends has a strong positive effect on respondents' VWC. Bivariate relationships of gender, age, and level of education with VWC were no longer significant in a multivariate analysis. Trust in alternative medicine and belief in conspiracy theories have a negative effect on VWC.}, language = {en} } @article{WiesentSchultheissLullaetal., author = {Wiesent, Lisa and Schultheiß, Ulrich and Lulla, Philipp and Nonn, Aida and Noster, Ulf}, title = {Mechanical properties of small structures built by selective laser melting 316 L stainless steel - a phenomenological approach to improve component design}, series = {Materials Science \& Engineering Technology}, volume = {51}, journal = {Materials Science \& Engineering Technology}, number = {12}, publisher = {Wiley}, doi = {10.1002/mawe.202000038}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-14718}, pages = {1615 -- 1629}, abstract = {Experimental investigations are conducted to quantify the influence of specimen thickness and orientation on the mechanical properties of selective laser melted stainless steel 316 L. The results indicate that the mechanical strength and ductility increase with increasing specimen thickness until a saturation value is reached from a specimen thickness of about 2 mm. Specimen orientation dependency is pronounced for thin specimens (<1.5 mm), whereas only small deviations in strength are observed for thicker specimens with orientations of 30°, 45° and 90° to build direction. The mechanical properties of the specimen orientation of 0° to build direction shows great deviation to the other orientations and the smallest overall strength. A reliable design of selective laser melted components should account for specimen thickness and orientation, e. g. by a correction factor. Furthermore, it is recommended to avoid loads vertical (90°) and parallel (0°) to build direction to guarantee higher ductility and strength.}, language = {en} } @article{HaugVetter, author = {Haug, Sonja and Vetter, Miriam}, title = {Altersgerechtes Wohnen im Quartier}, series = {Standort - Zeitschrift f{\"u}r angewandte Geographie}, volume = {45}, journal = {Standort - Zeitschrift f{\"u}r angewandte Geographie}, publisher = {Springer Nature}, issn = {1432-220X}, doi = {10.1007/s00548-020-00678-3}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-20050}, pages = {11 -- 17}, abstract = {Im Alter nimmt das Quartier aufgrund geringerer Aktionsradien an Bedeutung zu. Der Beitrag befasst sich mit der Frage, welche Besonderheiten sich bei Senioren-Haushalten im Hinblick auf Wohnen und soziale Teilhabe zeigen. Aus dem Projekt MAGGIE werden Ergebnisse einer schriftlichen Haushaltsbefragung (N=195) in der Wohngenossenschaft Margaretenau Regensburg dargestellt. Hierbei wird auf die aktuelle und zuk{\"u}nftige Wohnsituation, den Ver{\"a}nderungsbedarf, den Wunsch nach Gemeinschaftsangeboten und die soziale Einbettung eingegangen. Es zeigt sich eine geringe Ver{\"a}nderungsbereitschaft und ein {\"u}berdurchschnittlich hohes Maß an lokalem Sozialkapital. Am Ende werden Schlussfolgerungen f{\"u}r das Sanierungs- und Quartiersmanagement gezogen.}, subject = {Alter}, language = {de} } @article{PremSindersbergerStriegletal., author = {Prem, Nina and Sindersberger, Dirk and Striegl, Birgit and B{\"o}hm, Valter and Monkman, Gareth J.}, title = {Shape memory effects using magnetoactive Boron-organo-silicon oxide polymers}, series = {Macromolecular Chemistry and Physics}, volume = {221}, journal = {Macromolecular Chemistry and Physics}, number = {15}, publisher = {Wiley}, doi = {10.1002/macp.202000149}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-23205}, pages = {1 -- 8}, abstract = {Thermomechanical shape memory materials have certain disadvantages when it comes to 3D volumetric reproduction intended for rapid prototyping or robotic prehension. The need to constantly supply energy to counteract elastic retraction forces in order to maintain the required geometry, together with the inability to achieve conformal stability at elevated temperatures, limits the application of thermal shape memory polymers. Form removal also presents problems as most viscoelastic materials do not ensure demolding stability. This work demonstrates how magnetoactive boron-organo-silicon oxide polymers under the influence of an applied magnetic field can be used to achieve energy free sustainable volumetric shape memory effects over extended periods. The rheopectic properties of boron-organo-silicon oxide materials sustain form removal without mold distortion.}, language = {en} } @article{PangerlSukulRuecketal., author = {Pangerl, Jonas and Sukul, Pritam and R{\"u}ck, Thomas and Fuchs, Patricia and Weigl, Stefan and Miekisch, Wolfram and Bierl, Rudolf and Matysik, Frank-Michael}, title = {An inexpensive UV-LED photoacoustic based real-time sensor-system detecting exhaled trace-acetone}, series = {Photoacoustics}, volume = {38}, journal = {Photoacoustics}, publisher = {Elsevier}, issn = {2213-5979}, doi = {10.1016/j.pacs.2024.100604}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-71279}, pages = {12}, abstract = {n this research we present a low-cost system for breath acetone analysis based on UV-LED photoacoustic spectroscopy. We considered the end-tidal phase of exhalation, which represents the systemic concentrations of volatile organic compounds (VOCs) - providing clinically relevant information about the human health. This is achieved via the development of a CO2-triggered breath sampling system, which collected alveolar breath over several minutes in sterile and inert containers. A real-time mass spectrometer is coupled to serve as a reference device for calibration measurements and subsequent breath analysis. The new sensor system provided a 3σ detection limit of 8.3 ppbV and an NNEA of 1.4E-9 Wcm 1Hz 0.5. In terms of the performed breath analysis measurements, 12 out of 13 fell within the error margin of the photoacoustic measurement system, demonstrating the reliability of the measurements in the field.}, language = {en} } @article{MaierSchlattlGuessetal., author = {Maier, Robert and Schlattl, Andreas and Guess, Thomas and Mottok, J{\"u}rgen}, title = {CausalOps - Towards an industrial lifecycle for causal probabilistic graphical models}, series = {Information and Software Technology}, journal = {Information and Software Technology}, publisher = {Elsevier}, issn = {0950-5849}, doi = {10.1016/j.infsof.2024.107520}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-73350}, abstract = {Context: Causal probabilistic graph-based models have gained widespread utility, enabling the modeling of cause-and-effect relationships across diverse domains. With their rising adoption in new areas, such as safety analysis of complex systems, software engineering, and machine learning, the need for an integrated lifecycle framework akin to DevOps and MLOps has emerged. Currently, such a reference for organizations interested in employing causal engineering is missing. This lack of guidance hinders the incorporation and maturation of causal methods in the context of real-life applications. Objective: This work contextualizes causal model usage across different stages and stakeholders and outlines a holistic view of creating and maintaining them within the process landscape of an organization. Method: A novel lifecycle framework for causal model development and application called CausalOps is proposed. By defining key entities, dependencies, and intermediate artifacts generated during causal engineering, a consistent vocabulary and workflow model to guide organizations in adopting causal methods are established. Results: Based on the early adoption of the discussed methodology to a real-life problem within the automotive domain, an experience report underlining the practicability and challenges of the proposed approach is discussed. Conclusion: It is concluded that besides current technical advancements in various aspects of causal engineering, an overarching lifecycle framework that integrates these methods into organizational practices is missing. Although diverse skills from adjacent disciplines are widely available, guidance on how to transfer these assets into causality-driven practices still need to be addressed in the published literature. CausalOps' aim is to set a baseline for the adoption of causal methods in practical applications within interested organizations and the causality community.}, language = {en} } @article{HaugAltenbuchnerWeber, author = {Haug, Sonja and Altenbuchner, Amelie and Weber, Karsten}, title = {Elektronische Patientenakte und Freigabe von Gesundheitsdaten}, series = {P{\"a}diatrie \& P{\"a}dologie}, journal = {P{\"a}diatrie \& P{\"a}dologie}, publisher = {Springer}, issn = {0030-9338}, doi = {10.1007/s00608-024-01237-x}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-73847}, abstract = {Hintergrund In Deutschland wird die elektronische Patientenakte (ePA) eingef{\"u}hrt. Fragestellung Untersucht werden Nutzungsbereitschaft der ePA, Einstellung zu Gesundheitsdaten und Daten{\"u}bermittlung bei Personen mit und ohne Kinder. Methoden Telefonbefragung bei einer Zufallsstichprobe der Bev{\"o}lkerung in Deutschland (2022, n = 1308). Ergebnisse Die ePA ist bei Haushalten mit Kindern mehrheitlich unbekannt. Ihre Nutzungsbereitschaft der ePA und die Zustimmung zur Speicherung von Gesundheitsdaten ist geringer, aber sie sind h{\"a}ufiger als Haushalte ohne Kinder bereit zur Freigabe ihrer Gesundheitsdaten f{\"u}r die Forschung. Schlussfolgerung Es besteht Aufkl{\"a}rungsbedarf {\"u}ber die Speicherung von Gesundheitsdaten. Gew{\"u}nscht wird zunehmend eine digitale Arzt-Patienten-Kommunikation.}, language = {de} } @article{BauerSterner, author = {Bauer, Franz and Sterner, Michael}, title = {Impacts of lifestyle changes on energy demand and greenhouse gas emissions in Germany}, series = {Renewable and Sustainable Energy Reviews}, volume = {207}, journal = {Renewable and Sustainable Energy Reviews}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1364-0321}, doi = {10.1016/j.rser.2024.114944}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-77682}, pages = {17}, abstract = {Most energy scenario studies typically focus on technological options and fuel substitution for decarbonising future energy systems. Lifestyle changes are rarely considered, although they can significantly reduce energy demand and climate change mitigation efforts. By using an energy system model, this study shows that it is possible to reduce final energy demand in Germany by 61 \% in 2050 relative to 2019 levels, resulting in an annual per capita energy demand of 44 GJ for a representative country of the Global North. This goal can be achieved through a combination of technological measures and lifestyle changes without sacrificing a decent standard of living. Societal chances can eliminate reliance on not-yet-established negative emission technologies, reduce energy dependency, and reduce the need for energy-intensive hydrogen and e-fuels. Downsizing the energy system provides an opportunity for strengthening climate change mitigation, decrease material demand and reduce land use.}, language = {en} } @article{AlbrechtHellerbrandWeiningeretal., author = {Albrecht, Sophie Viktoria and Hellerbrand, Stefan and Weininger, Florian and Thiel, Charlotte}, title = {Strategies for Minimizing Environmental Impact in Construction: A Case Study of a Cementitious 3D Printed Lost Formwork for a Staircase}, series = {materials}, volume = {18}, journal = {materials}, publisher = {MDPI}, doi = {10.3390/ma18040825}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-79236}, pages = {18}, abstract = {The construction industry faces significant challenges, including environmental sustainability, rising material costs, and a shortage of skilled labor. Digital fabrication technologies offer innovative solutions to address these issues by reducing raw material consumption and waste generation. Among these, 3D printing technologies offer distinct advantages over traditional construction methods, particularly in handling complex geometries. However, the significant environmental impact of cement in 3D printed concrete, due to its high rheological and printability requirements, remains a concern. This study introduces a novel application of 3D printed permanent formwork in the construction of a winder staircase, assessed through an Environmental Life Cycle Assessment (LCA) from cradle to gate. By comparing the environmental impacts of various construction materials and processes, this study highlights the comparative advantages and disadvantages of conventional methods versus 3D printing. The LCA results reveal that traditional production methods, particularly those using plywood formwork, exhibit higher environmental impacts. In contrast, timber formwork performs better than most 3D printed mixtures in terms of Global Warming Potential (GWP), Acidification Potential (AP), and abiotic depletion potential (ADP). The findings of this study underscore the potential of additive manufacturing for sustainable construction, particularly through the use of low-clinker cement in 3D printed formwork, offering a promising pathway towards reducing the environmental footprint of construction activities}, language = {en} } @article{EscherRueckJobstetal., author = {Escher, Lukas and R{\"u}ck, Thomas and Jobst, Simon and Pangerl, Jonas and Bierl, Rudolf and Matysik, Frank-Michael}, title = {Photodissociation-Driven Photoacoustic Spectroscopy with UV-LEDs for Ozone Detection}, series = {Photoacoustics}, volume = {43}, journal = {Photoacoustics}, publisher = {Elsevier BV}, issn = {2213-5979}, doi = {10.1016/j.pacs.2025.100718}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-80076}, pages = {16}, abstract = {This study presents the development and evaluation of a UV-LED based photoacoustic (PA) measurement system for ozone (O3) detection to demonstrate its potential for low-cost and accurate sensing while for the first time addressing the importance of photodissociation for PA signal generation for O3 in the UV range. With a detection limit of 7.9 ppbV, the system exhibits a significant advancement over state-of-the-art UV-PA O3 detection and is on par with laser-based setups. Following a novel discussion of the PA signal arising from photodissociation and its products, cross-sensitivity effects due to environmental factors such as temperature and gas composition were systematically analyzed. A digital twin driven compensation for these influences was implemented and evaluated. Despite the challenges associated with modeling the effects of H2O and CO2, the PA system shows considerable potential, though further studies in real world applications must be conducted.}, language = {en} } @article{WestnerReichenederMatschi, author = {Westner, Markus and Reicheneder, Matthias and Matschi, Markus}, title = {From Captive Centers to Global Integration}, series = {Information Resources Management Journal}, volume = {38}, journal = {Information Resources Management Journal}, number = {1}, publisher = {IGI Global}, issn = {1533-7979}, doi = {10.4018/IRMJ.373322}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-80406}, pages = {25}, abstract = {Contemporary developments in virtual work and global talent management are transforming information technology (IT) nearshoring and offshoring practices, yet research on organizational responses remains limited. Through expert interviews with 33 IT executives (76\% chief information officers) from Germany's top 500 companies, this article examines organizational models, strategies, and good practices in IT nearshoring and offshoring. It reveals a shift from traditional captive centers toward fully integrated global teams, enabling high-value task delivery and reflecting increased workforce maturity. Companies are expanding their operations driven by talent needs rather than cost savings, with success factors including employee integration and robust on-site management. This study contributes to theory and practice by providing a framework for understanding organizational models in global IT delivery and offering actionable insights for executives, emphasizing workforce integration over geographical separation.}, subject = {Offshoring}, language = {en} } @article{HauslerHolznerEhrnspergeretal., author = {Hausler, Peter and Holzner, Lukas and Ehrnsperger, Matthias and Bierl, Rudolf}, title = {Evaluation of the creep strength of samples produced by fused deposition modeling}, series = {Open Engineering}, volume = {14}, journal = {Open Engineering}, number = {1}, publisher = {de Gruyter}, doi = {10.1515/eng-2024-0084}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-79760}, pages = {10}, abstract = {Data sheets for 3D printing materials typically include softening temperature, impact strength, tensile strength, and stiffness. However, creep strength, an important parameter for components used over an extended period, is usually not included. Nevertheless, this parameter is of significant importance for components that are used over an extended period of time.This study compares the long-term creep behavior of a selection of materials that are commonly used in fused deposition modeling 3D printing. The materials under investigation are acrylonitrile butadiene styrene, acrylonitrile styrene acrylate, polylactic acid, and polycarbonate. In addition, the influence of fiber reinforcements on these materials is also examined. A simple, reproducible test procedure is proposed for users to determine and compare creep resistance of materials. This enables developers to select materials suitable for their own requirements on creep resistance and allows 3D-printing users to compare different materials. Results suggest that fiber reinforcement generally improves creep stability in 3D-printing materials, with GreenTEC Pro Carbon and add:north PC Blend HT LCF showing the most promise in this study.}, language = {en} } @article{KastenmeierSieglEhrlichetal., author = {Kastenmeier, Andreas and Siegl, Marco and Ehrlich, Ingo and Gebbeken, Norbert}, title = {Review of elasto-static models for three-dimensional analysis of thick-walled anisotropic tubes}, series = {Journal of Composite Materials}, journal = {Journal of Composite Materials}, publisher = {Sage}, doi = {10.1177/00219983231215863}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-67521}, abstract = {Most shell or beam models of anisotropic tubes under bending have no validity for thick-walled structures. As a result, the need to develop three-dimensional formulations which allow a change in the stress, strain and displacement distributions across the radial component arises. Basic formulations on three-dimensional anisotropic elasticity were made either stressor displacement-based by Lekhnitskii or Stroh on plates. Lekhnitskii also was the first to expand these analytical formulations to tubes under various loading conditions. This paper presents a review of the stress and strain analysis of tube models using three-dimensional anisotropic elasticity. The focus lies on layered structures, like fiber-reinforced plastics, under various bending loads, although the basic formulations and models regarding axisymmetric loads are briefly discussed. One section is also dedicated to the determination of an equivalent bending stiffness of tubes.}, language = {en} } @article{HaugSchnellRaptisetal., author = {Haug, Sonja and Schnell, Rainer and Raptis, Georgios and Dotter, Caroline and Weber, Karsten}, title = {Wissen und Einstellung zur Speicherung und Nutzung von Gesundheitsdaten: Ergebnisse einer Bev{\"o}lkerungsbefragung}, series = {Zeitschrift f{\"u}r Evidenz, Fortbildung und Qualit{\"a}t im Gesundheitswesen}, journal = {Zeitschrift f{\"u}r Evidenz, Fortbildung und Qualit{\"a}t im Gesundheitswesen}, publisher = {Elsevier}, issn = {1865-9217}, doi = {10.1016/j.zefq.2023.11.001}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-67461}, pages = {50 -- 58}, abstract = {Hintergrund/Zielsetzung Der Beitrag befasst sich mit dem Wissenstand und der Einstellung der Bev{\"o}lkerung. Betrachtet werden die {\"U}bermittlung und Verf{\"u}gbarkeit von Gesundheitsdaten, Gesundheitsregister, die elektronische Patientenakte, Einwilligungsverfahren f{\"u}r die {\"U}bermittlung von Daten und der Zugriff auf Gesundheitsdaten zu Forschungszwecken. Methoden Die Studie basiert auf einer computergest{\"u}tzten Telefonbefragung (Dual-Frame) bei einer Zufallsstichprobe der Bev{\"o}lkerung in Deutschland im Zeitraum 01.-27.06.2022 (n = 1.308). Ergebnisse Der Wissensstand zur {\"U}bermittlung von Gesundheitsdaten an Krankenkassen ist hoch, wohingegen das Vorhandensein zentraler Sterbe-, Impf- und Gesundheitsregister sowie der Zugriff auf Gesundheitsdaten durch behandelnde {\"A}rztinnen und {\"A}rzte {\"u}bersch{\"a}tzt werden. Die Akzeptanz medizinischer Register ist sehr hoch. Die elektronische Patientenakte ist bei der H{\"a}lfte der Bev{\"o}lkerung unbekannt, die Nutzungsbereitschaft ist eher gering ausgepr{\"a}gt; bei der {\"U}bertragung von Daten wird eine Zustimmungsoption bevorzugt, und {\"u}ber achtzig Prozent w{\"u}rden die Daten der elektronischen Patientenakte zur Forschung freigeben. Drei Viertel w{\"u}rden ihre Gesundheitsdaten allgemein zur Forschung freigeben, insbesondere an Universit{\"a}ten in Deutschland, wobei meist Anonymit{\"a}t Bedingung ist. Die Bereitschaft zur Datenfreigabe steigt mit der H{\"o}he des Vertrauens in die Presse sowie in Universit{\"a}ten und Hochschulen, und sie sinkt, wenn ein Datenleck als schwerwiegend erachtet wird. Diskussion und Schlussfolgerung In Deutschland besteht, wie in anderen europ{\"a}ischen L{\"a}ndern, eine große Bereitschaft zur Freigabe von Gesundheitsdaten zu Forschungszwecken. Dagegen ist der Wunsch zur Nutzung der elektronischen Patientenakte eher gering. Ebenso niedrig ist die Akzeptanz einer Widerspruchsoption, die jedoch als Voraussetzung f{\"u}r eine erfolgreiche Einf{\"u}hrung einer elektronischen Patientenakte gilt. Vertrauen in die Forschung und staatliche Stellen, die Gesundheitsdaten verarbeiten, sind zentrale Faktoren.}, language = {en} } @article{ScharfHaugRitthaleretal., author = {Scharf, Anna and Haug, Sonja and Ritthaler, Markus and Raptis, Georgios}, title = {Chancen und Herausforderungen der Digitalisierung bei der Rehabilitation - Ergebnisse einer Befragung von Rehabilitationseinrichtungen}, series = {Die Rehabilitation: Zeitschrift f{\"u}r Praxis und Forschung in der Rehabilitation}, volume = {62}, journal = {Die Rehabilitation: Zeitschrift f{\"u}r Praxis und Forschung in der Rehabilitation}, number = {5}, publisher = {Thieme}, address = {Stuttgart}, doi = {10.1055/a-2123-1566}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-64726}, pages = {299 -- 307}, abstract = {Ziel der Studie: Ziel der Studie ist die Messung des Stands der Digitalisierung und die mit einer Anbindung an die Telematikinfrastruktur verbundenen Chancen und Herausforderungen f{\"u}r Rehabilitationseinrichtungen. Methodik: Teilstandardisierte Online-Befragung bei Tr{\"a}gern von Rehabilitationseinrichtungen in Bayern (n=33). Der Fragebogen mit 36 Fragen beinhaltet eine leicht ver{\"a}nderte Skala auf Basis des „Electronic Medical Record Adoption Model (EMRAM)". Ergebnisse: Der Digitalisierungsgrad wurde in 70 Prozent der Rehabilitationseinrichtungen mit Stufe 0 angegeben (Stufenmodell bis 7). Die {\"U}bermittlung patientenbezogener Daten (Eingang und Ausgang) erfolgt h{\"a}ufig analog, wohingegen die Verarbeitung innerhalb der Einrichtung in vielen F{\"a}llen bereits {\"u}berwiegend digital ist. Beim Anschluss an die Telematikinfrastruktur wird hoher Aufwand bei der Installation, aber auch der Schulung des Personals und der Anpassung der Arbeitsorganisation gesehen. Schlussfolgerung: Durch {\"A}nderung der gesetzlich-finanziellen Lage in Deutschland er{\"o}ffnen sich f{\"u}r Rehabilitationseinrichtungen neue M{\"o}glichkeiten einer verst{\"a}rkten Digitalisierung. H{\"u}rden h{\"a}ngen mit Anforderungen an IT-Sicherheit, Schulung des Personals und sowie dem ebenfalls geringen Digitalisierungsstand bei Krankenh{\"a}usern und {\"A}rzt*innen sowie Patient*innen zusammen, die eine digitale Daten{\"u}bermittlung erschweren.}, language = {de} } @article{Richter, author = {Richter, Stefanie}, title = {Erleben von Zukunftsunsicherheit, Armutsrisiken und prek{\"a}ren Lebenslagen im Pflegeheim}, series = {Zeitschrift f{\"u}r Gerontologie und Geriatrie}, journal = {Zeitschrift f{\"u}r Gerontologie und Geriatrie}, edition = {Online first}, publisher = {Springer}, doi = {10.1007/s00391-023-02231-x}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-64350}, pages = {1 -- 6}, abstract = {Die Situation von Menschen im Pflegeheim, die besonders dem Risiko der „pflegebedingten Verarmung" ausgesetzt sind, ist in der Forschung wenig pr{\"a}sent. Der Beitrag befasst sich mit dem Erleben von Unsicherheiten, Armut und prek{\"a}ren Lebenslagen {\"a}lterer Menschen im Heim. Grundlage liefern Daten einer ethnographischen Studie zum {\"A}lterwerden und zum Leben mit chronischen Erkrankungen. Anhand von F{\"a}llen wird ein Spektrum prek{\"a}rer Lebenslagen skizziert. Deutlich wird u. a.: Menschen mit diversen soziobiografischen Hintergr{\"u}nden k{\"o}nnen im Zuge von Hilfebed{\"u}rftigkeit und Heim{\"u}berg{\"a}ngen von Unsicherheiten, Armut und prek{\"a}ren Lebenslagen betroffen sein. Nicht zu wissen, ob das verf{\"u}gbare Geld gen{\"u}gt, um Kostensteigerungen bis zum Lebensende zu decken, kennzeichnet eine h{\"a}ufig erlebte Zukunftsunsicherheit; drohende Armut bzw. die Abh{\"a}ngigkeit von Sozialhilfe k{\"o}nnen pflege- und institutionell bedingte Verlusterfahrungen von Autonomie, Teilhabe und Lebensgestaltung versch{\"a}rfen und den Gesamtzustand weiter destabilisieren. Das Erleiden bleibt weitgehend unsichtbar; strukturelle Probleme werden individualisiert.}, language = {de} } @article{Goertler, author = {G{\"o}rtler, Michael}, title = {Bildung und Zeit im Kontext der Sozialen Arbeit : Theoretische {\"U}berlegungen zur Bedeutung von Zeit f{\"u}r Bildungsprozesse im Kontext der Sozialen Arbeit}, series = {Sozial Extra}, volume = {47}, journal = {Sozial Extra}, number = {1}, publisher = {Springer}, doi = {10.1007/s12054-023-00570-y}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-60988}, pages = {46 -- 49}, abstract = {Die Bedeutung von Zeit f{\"u}r Bildungsprozesse im Kontext der Sozialen Arbeit ist bisher wenig erforscht. Um sich dieser Fragestellung anzun{\"a}hern, werden in diesem Beitrag theoretische {\"U}berlegungen im Anschluss an Diskurse zu Bildung und Zeit in der P{\"a}dagogik angestellt. Dabei wird Zeit als erm{\"o}glichender, {\"o}konomischer und politischer Faktor diskutiert, um die Perspektive der Sozialen Arbeit auf Bildungsprozesse zu erweitern.}, language = {de} } @article{PongratzTixWolfrumetal., author = {Pongratz, Christian and Tix, Janek and Wolfrum, Johannes and Gerke, Steffen and Ehrlich, Ingo and Br{\"u}nig, Michael}, title = {Test Setup for Investigating the Impact Behavior of Biaxially Prestressed Composite Laminates}, series = {Experimental Techniques}, journal = {Experimental Techniques}, publisher = {Springer Nature}, issn = {0732-8818}, doi = {10.1007/s40799-024-00701-4}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-70355}, pages = {14 S.}, abstract = {Instrumented impact testing and compression-after-impact testing are important to adequately qualify material behavior and safely design composite structures. However, the stresses to which fiber-reinforced plastic components are typically subjected in practice are not considered in the impact test methods recommended in guidelines or standards. In this paper, a test setup for investigating the impact behavior of composite specimens under plane uniaxial and biaxial preloading is presented. For this purpose, a special test setup consisting of a biaxial testing machine and a specially designed drop-weight tower was developed. The design decisions were derived from existing guidelines and standards with the aim of inducing barely visible impact damage in laminated carbon fiber-reinforced plastic specimens. Several measurement systems have been integrated into the setup to allow comprehensive observation of the impact event and specimen behavior. A feasibility test was performed with biaxially prestressed carbon fiber-reinforced plastic specimens in comparison with unstressed reference tests. The compressive-tensile prestressing resulted in lower maximum contact forces, higher maximum deflections, higher residual deflections and a different damage pattern, which was investigated by light microscopic analysis. Finally, the functionality of the experimental setup is discussed, and the results seem to indicate that the test setup and parameters were properly chosen to investigate the effect of prestresses on the impacts behavior of composite structures, in particular for barely visible subsequent damages.}, subject = {Faserverbundwerkstoff}, language = {en} } @article{GradZentgrafSchultheissetal., author = {Grad, Marius and Zentgraf, Jan and Schultheiss, Ulrich and Esper, Lukas and Diemar, Andreas and Noster, Ulf and Spiess, Lothar}, title = {Effect of Carbon Content on the Phase Composition, Microstructure and Mechanical Properties of the TiC Layer Formed in Hot-Pressed Titanium-Steel Composites}, series = {Metals}, volume = {14}, journal = {Metals}, number = {9}, publisher = {MDPI AG}, issn = {2075-4701}, doi = {10.3390/met14090959}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-74617}, abstract = {During the hot pressing of pure titanium and different carbon steels in a temperature range of ϑ = 950-1050 °C, a compound layer up to dL≈10 μm thick is formed at the titanium-steel interface. With a higher carbon content of the used steel, the layer thickness increases. The carbon concentration within the layer is in the range of stoichiometry for TiC. Apart from TiC, no other phases can be detected by X-ray diffraction (XRD) measurements inside the formed layer. The calculation of the activation energy for the TiC layer formation is Q = 126.5-136.7 kJ mol-1 and is independent of the carbon content of the steel. The resulting microstructure has a grain size gradient, wherein the mechanical properties, such as hardness and Young's modulus, are almost constant. Statistical analysis using Response Surface Methodology (RSM) indicates that the carbon content of the steel has the most significant influence on layer thickness, followed by annealing temperature and annealing time. By selecting the appropriate carbon steel and the subsequent removal of the steel, it is possible to produce targeted TiC layers on titanium substrates, which holds enormous potential for this material in wear-intensive applications.}, language = {en} } @article{AltmannSchleglVolbert, author = {Altmann, Matthias and Schlegl, Peter and Volbert, Klaus}, title = {A low-power wireless system for energy consumption analysis at mains sockets}, series = {EURASIP Journal on Embedded Systems}, journal = {EURASIP Journal on Embedded Systems}, number = {1}, publisher = {Springer Nature}, doi = {10.1186/s13639-016-0041-y}, pages = {18}, abstract = {Introduction: Improving energy efficiency and reducing energy wastage is an important topic of our time. But it is quite difficult to figure out how much of our total electricity bill can be mapped to which device or at what time the device used it. We believe energy efficiency of normal households can be improved, if this kind of transparency would be available. In this article, we present a system for energy measurement at mains sockets to gain a transparent view of energy consumption for each device in a household. It consists of several smart energy measuring devices (SEMDs) that use a low-power radio protocol to dynamically build and connect to a radio network to transfer power usage date to a server. At the server, the data is stored and can be accessed via web interface. Results: Our primary goal was to build a back-end system for an energy metering platform with very low energy consumption. This platform can provide data for a variety of services that enables users (the consumers) to understand and improve their energy consumption behavior and increase overall energy efficiency of their households.}, language = {en} } @article{AuerSchieblIversenetal., author = {Auer, Simon and Schiebl, Jonas and Iversen, Kristoffer and Subhash Chander, Divyaksh and Damsgaard, Michael and Dendorfer, Sebastian}, title = {Biomechanical assessment of the design and efficiency of occupational exoskeletons with the AnyBody Modeling System}, series = {Zeitschrift f{\"u}r Arbeitswissenschaften}, volume = {76}, journal = {Zeitschrift f{\"u}r Arbeitswissenschaften}, number = {4}, publisher = {Springer Nature}, doi = {10.1007/s41449-022-00336-4}, pages = {440 -- 449}, abstract = {Exoskeletons were invented over 100 years ago but have only become popular in the last two decades, especially in the working industry as they can decrease work-related loads significantly. The most often used exoskeletons are for the lower back and shoulder since these are commonly affected body regions. All devices have in common that their purpose is to reduce internal loads of vulnerable body regions. Nevertheless, there is still little understanding on how biomechanical loading in the human body changes when exoskeletons are used. Therefore, further analyses are needed. A promising candidate for these are musculoskeletal models, which are based on an inverse dynamics approach and can calculate external parameters such as ground reaction forces or other interaction forces as well as internal parameters such as joint reaction forces or muscle activities. The various examples in the literature show that these models are increasingly used for assessing the biomechanical effects of exoskeletons on the human body. Furthermore, musculoskeletal models can calculate biomechanical loadings of humans with and without exoskeletons for all kinds of applications and allow an evaluation of their purpose. Practical Relevance: This article highlights the possibilities of musculoskeletal models for assessing the design and efficiency of occupational exoskeletons. Several practical use cases are described along with distinct descriptions of common implications of musculoskeletal and exoskeleton modeling.}, language = {en} } @article{MelznerPfeifferSuessetal., author = {Melzner, Maximilian and Pfeiffer, Christian and Suess, Franz and Dendorfer, Sebastian}, title = {Musculoskeletal simulation of elbow stability for common injury patterns}, series = {Journal of Orthopaedic Research}, volume = {41}, journal = {Journal of Orthopaedic Research}, number = {6}, publisher = {Wiley}, issn = {1554-527X}, doi = {10.1002/jor.25460}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-54819}, pages = {1356 -- 1364}, abstract = {Elbow stability is derived from a combination of muscular, ligamentous, and bony structures. After an elbow trauma the stability of the joint is an important decision criterion for the subsequent treatment. The decision regarding non-operative/operative care depends mostly on subjective assessments of medical experts. Therefore, the aim of this study is to use musculoskeletal simulations as an objective assessment tool to investigate the extent to which failure of different stabilizers affects the elbow stability and how these observations correspond to the assessment from clinical practice. A musculoskeletal elbow simulation model was developed for this aim. To investigate the stability of the elbow, varus/valgus moments were applied under 0°, 45°and 90° flexion while the respective cubital angle was analyzed. This was performed for nine different injury scenarios, which were also evaluated for stability by clinical experts. With the results, it can be determined by which injury pattern and under which flexion angle the elbow stability is impaired regarding varus/valgus moments. The scenario with a complete failure of the medial and lateral ligaments and a fracture of the radial head was identified as having the greatest instability. The study presented a numerical determination of elbow stability against varus/valgus moments regarding clinical injury patterns, as well as a comparison of the numerical outcome with experience gained in clinical practice. The numerical predictions agree well with the assessments of the clinical specialists. Thus, the results from musculoskeletal simulation can make an important contribution to a more objective assessment of the elbow stability.}, language = {en} } @article{ReinkerBlaesingBierletal., author = {Reinker, Lukas and Bl{\"a}sing, Dominic and Bierl, Rudolf and Ulbricht, Sabina and Dendorfer, Sebastian}, title = {Correlation of Acceleration Curves in Gravitational Direction for Different Body Segments during High-Impact Jumping Exercises}, series = {sensors}, volume = {23}, journal = {sensors}, number = {4}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/s23042276}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-58217}, abstract = {Osteoporosis is a common disease of old age. However, in many cases, it can be very well prevented and counteracted with physical activity, especially high-impact exercises. Wearables have the potential to provide data that can help with continuous monitoring of patients during therapy phases or preventive exercise programs in everyday life. This study aimed to determine the accuracy and reliability of measured acceleration data at different body positions compared to accelerations at the pelvis during different jumping exercises. Accelerations at the hips have been investigated in previous studies with regard to osteoporosis prevention. Data were collected using an IMU-based motion capture system (Xsens) consisting of 17 sensors. Forty-nine subjects were included in this study. The analysis shows the correlation between impacts and the corresponding drop height, which are dependent on the respective exercise. Very high correlations (0.83-0.94) were found between accelerations at the pelvis and the other measured segments at the upper body. The foot sensors provided very weak correlations (0.20-0.27). Accelerations measured at the pelvis during jumping exercises can be tracked very well on the upper body and upper extremities, including locations where smart devices are typically worn, which gives possibilities for remote and continuous monitoring of programs.}, language = {en} } @article{AuerKubowitschDendorfer, author = {Auer, Simon and Kubowitsch, Simone and Dendorfer, Sebastian}, title = {Kombinierter Einfluss von psychologischen und biomechanischen Faktoren auf die muskul{\"a}ren Belastungen beim Fußballspielen}, series = {Die Orthop{\"a}die}, volume = {52}, journal = {Die Orthop{\"a}die}, number = {11}, publisher = {Springer}, doi = {10.1007/s00132-023-04437-8}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-65113}, pages = {1 -- 6}, abstract = {When mental stress and musculoskeletal loading interact, the risk for injury increases due to altered body kinematics and increased muscle tension. These changes can be detected with musculoskeletal models, and mental loading and stress must be analyzed at emotional, cognitive, and behavioral levels. To investigate these kinematic and loading changes under stress, competitive athletes were subjected to mental stress during highly dynamic movements, and musculoskeletal models were used to analyze the biomechanical loading. It was shown that under mental stress, independent of the subjective perception, a strong change in muscle forces can occur. Accordingly, competitive athletes should undergo screenings to assess individual movement patterns and promote general stress resilience.}, language = {de} } @article{MelznerSuessDendorfer, author = {Melzner, Maximilian and Suess, Franz and Dendorfer, Sebastian}, title = {The impact of anatomical uncertainties on the predictions of a musculoskeletal hand model - a sensitivity study}, series = {Computer Methods in Biomechanics and Biomedical Engineering}, volume = {25}, journal = {Computer Methods in Biomechanics and Biomedical Engineering}, number = {2}, publisher = {Taylor \& Francis}, issn = {1476-8259}, doi = {10.1080/10255842.2021.1940974}, pages = {156 -- 164}, abstract = {Outputs of musculoskeletal models should be considered probabilistic rather than deterministic as they are affected by inaccuracies and estimations associated with the development of the model. One of these uncertainties being critical for modeling arises from the determination of the muscles' line of action and the physiological cross-sectional area. Therefore, the aim of this study was to evaluate the outcome sensitivity of model predictions from a musculoskeletal hand model in comparison to the uncertainty of these input parameters. For this purpose, the kinematics and muscle activities of different hand movements (abduction of the fingers, abduction of the thumb, and flexion of the thumb) were recorded. One thousand simulations were calculated for each movement using the Latin hypercube sampling method with a corresponding variation of the muscle origin/insertion points and the cross-sectional area. Comparing the standard hand to simulations incorporating uncertainties of input parameters shows no major deviations in on- and off-set time point of muscle activities. About 60\% of simulations are located within a ± 30\% interval around the standard model concerning joint reaction forces. The comparison with the variation of the input data leads to the conclusion that the standard hand model is able to provide not over-scattered outcomes and, therefore, can be considered relatively stable. These results are of practical importance to the personalization of a musculoskeletal model with subject-specific bone geometries and hence changed muscle line of action.}, subject = {Biomechanik}, language = {en} } @article{MelznerEngelhardtSimonetal., author = {Melzner, Maximilian and Engelhardt, Lucas and Simon, Ulrich and Dendorfer, Sebastian}, title = {Electromyography-Based Validation of a Musculoskeletal Hand Model}, series = {Journal of Biomechanical Engineering}, volume = {144}, journal = {Journal of Biomechanical Engineering}, number = {2}, publisher = {American Society of Mechanical Engineers, ASME}, doi = {10.1115/1.4052115}, pages = {8}, abstract = {Regarding the prevention of injuries and rehabilitation of the human hand, musculoskeletal simulations using an inverse dynamics approach allow for insights of the muscle recruitment and thus acting forces on the hand. Currently, several hand models from various research groups are in use, which are mainly validated by the comparison of numerical and anatomical moment arms. In contrast to this validation and model-building technique by cadaver studies, the aim of this study is to further validate a recently published hand model [1] by analyzing numerically calculated muscle activities in comparison to experimentally measured electromyographical signals of the muscles. Therefore, the electromyographical signals of 10 hand muscles of five test subjects performing seven different hand movements were measured. The kinematics of these tasks were used as input for the hand model, and the numerical muscle activities were computed. To analyze the relationship between simulated and measured activities, the time difference of the muscle on- and off-set points was calculated, which resulted in a mean on- and off-set time difference of 0.58 s between the experimental data and the model. The largest differences were detected for movements that mainly addressed the wrist. One major issue comparing simulated and measured muscle activities of the hand is cross-talk. Nevertheless, the results show that the hand model fits the experiment quite accurately despite some limitations and is a further step toward patient-specific modeling of the upper extremity.}, subject = {Elektromyographie}, language = {en} } @article{SaffertMelznerDendorfer, author = {Saffert, Anne-Sophie and Melzner, Maximilian and Dendorfer, Sebastian}, title = {Biomechanical analysis of the right elevated glenohumeral joint in violinists during legato-playing}, series = {Technology and Health Care}, volume = {30}, journal = {Technology and Health Care}, number = {1}, publisher = {IOS Press}, doi = {10.3233/THC-219001}, pages = {177 -- 186}, abstract = {BACKGROUND: Many statistics reveal that violin players suffer most often from musculoskeletal disorders compared to musicians of other instrument groups. A common phenomenon, especially observed in violin beginners, is the tendency to elevate the right shoulder during playing the violin. This can probably lead to serious disorders in long-term practice with repetitive movements. OBJECTIVE: For this reason, this study investigated the relationship between the right shoulder elevation and the force in the right glenohumeral joint during violin playing. It was hypothesized that the forces in the right glenohumeral joint are higher during playing with the right shoulder raised compared to playing in normal posture. METHODS: Motion capture data from four experienced violinists was recorded and processed by means of musculoskeletal simulation to get the force and elevation angle while playing with raised shoulder and in normal position. RESULTS: The results indicate that the absolute values of the resulting force, as well as the forces in the mediolateral, inferosuperior, and anteroposterior directions, are higher in playing the violin with the shoulder raised than in a normal posture. CONCLUSIONS: Elevating the right shoulder while playing the violin may pose a potential problem.}, subject = {Biomechanische Analyse}, language = {en} } @article{AuerSuessDendorfer, author = {Auer, Simon and S{\"u}ß, Franz and Dendorfer, Sebastian}, title = {Using markerless motion capture and musculoskeletal models: An evaluation of joint kinematics}, series = {Technology and Health Care}, journal = {Technology and Health Care}, publisher = {IOS Press}, issn = {0928-7329}, doi = {10.3233/THC-240202}, pages = {1 -- 10}, abstract = {BACKGROUND: This study presents a comprehensive comparison between a marker-based motion capture system (MMC) and a video-based motion capture system (VMC) in the context of kinematic analysis using musculoskeletal models. OBJECTIVE: Focusing on joint angles, the study aimed to evaluate the accuracy of VMC as a viable alternative for biomechanical research. METHODS: Eighteen healthy subjects performed isolated movements with 17 joint degrees of freedom, and their kinematic data were collected using both an MMC and a VMC setup. The kinematic data were entered into the AnyBody Modelling System, which enables the calculation of joint angles. The mean absolute error (MAE) was calculated to quantify the deviations between the two systems. RESULTS: The results showed good agreement between VMC and MMC at several joint angles. In particular, the shoulder, hip and knee joints showed small deviations in kinematics with MAE values of 4.8∘, 6.8∘ and 3.5∘, respectively. However, the study revealed problems in tracking hand and elbow movements, resulting in higher MAE values of 13.7∘ and 27.7∘. Deviations were also higher for head and thoracic movements. CONCLUSION: Overall, VMC showed promising results for lower body and shoulder kinematics. However, the tracking of the wrist and pelvis still needs to be refined. The research results provide a basis for further investigations that promote the fusion of VMC and musculoskeletal models.}, language = {en} } @article{DiermeierSindersbergerKrenkeletal., author = {Diermeier, Andreas and Sindersberger, Dirk and Krenkel, Lars and Rosell, X. C. and Monkman, Gareth J.}, title = {Controllable Magnetoactive Polymer Conduit}, series = {The Open Mechanical Engineering Journal}, volume = {12}, journal = {The Open Mechanical Engineering Journal}, number = {1}, publisher = {Bentham}, pages = {192 -- 200}, abstract = {Objective: Magneto-active Polymers (MAP) are smart materials whose mechanical characteristics, such as elastic and shear moduli, may be controllable by means of an externally applied magnetic field. Methods: Various additives may be used to influence the characteristics of the polymer matrix whilst a suspension of soft and/or hard magnetic particles determine the magnetic properties of the composite. Both pre-cure and post-cure magnetization is possible. Results: A range of control strategies have been investigated for evaluation of the system using fluids of differing kinematic viscosity. Conclusion: Depending on the degree of magnetic field homogeneity, magneto-deformation and magnetostriction contribute to MAP actuation. This paper presents a novel application in the form of a peristaltic MAP tube system, applicable to flow control and pumping of hemorheological fluids in blood circulatory systems for biomedical research purposes.}, language = {en} } @article{KoeckStrieglKrausetal., author = {K{\"o}ck, Hannah and Striegl, Birgit and Kraus, Annalena and Zborilova, Magdalena and Christiansen, Silke H. and Sch{\"a}fer, Nicole and Gr{\"a}ssel, Susanne and Hornberger, Helga}, title = {In Vitro Analysis of Human Cartilage Infiltrated by Hydrogels and Hydrogel-Encapsulated Chondrocytes}, series = {Bioengineering}, volume = {10}, journal = {Bioengineering}, publisher = {MDPI}, doi = {10.3390/bioengineering10070767}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-61235}, pages = {1 -- 21}, abstract = {Osteoarthritis (OA) is a degenerative joint disease causing loss of articular cartilage and structural damage in all joint tissues. Given the limited regenerative capacity of articular cartilage, methods to support the native structural properties of articular cartilage are highly anticipated. The aim of this study was to infiltrate zwitterionic monomer solutions into human OA-cartilage explants to replace lost proteoglycans. The study included polymerization and deposition of methacryloyloxyethyl-phosphorylcholine- and a novel sulfobetaine-methacrylate-based monomer solution within ex vivo human OA-cartilage explants and the encapsulation of isolated chondrocytes within hydrogels and the corresponding effects on chondrocyte viability. The results demonstrated that zwitterionic cartilage-hydrogel networks are formed by infiltration. In general, cytotoxic effects of the monomer solutions were observed, as was a time-dependent infiltration behavior into the tissue accompanied by increasing cell death and penetration depth. The successful deposition of zwitterionic hydrogels within OA cartilage identifies the infiltration method as a potential future therapeutic option for the repair/replacement of OA-cartilage extracellular suprastructure. Due to the toxic effects of the monomer solutions, the focus should be on sealing the OA-cartilage surface, instead of complete infiltration. An alternative treatment option for focal cartilage defects could be the usage of monomer solutions, especially the novel generated sulfobetaine-methacrylate-based monomer solution, as bionic for cell-based 3D bioprintable hydrogels.}, language = {en} } @article{HornbergerKisselStriegletal., author = {Hornberger, Helga and Kissel, Hannah and Striegl, Birgit and Kronseder, Matthias and Vollnhals, Florian and Christiansen, Silke H.}, title = {Bioactivity and corrosion behavior of magnesium barrier membranes}, series = {Materials and Corrosion}, volume = {73}, journal = {Materials and Corrosion}, number = {1}, publisher = {Wiley}, doi = {10.1002/maco.202112385}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-24499}, pages = {8 -- 19}, abstract = {In the current research, magnesium and its alloys have been intensively studied as resorbable implant materials. Magnesium materials combine their good mechanical properties with bioactivity, which make them interesting for guided bone regeneration and for the application as barrier membranes. In this study, the in vitro degradation behavior of thin magnesium films was investigated in cell medium and simulated body fluid. Three methods were applied to evaluate corrosion rates: measurements of (i) the gaseous volume evolved during immersion, (ii) volume change after immersion, and (iii) polarization curves. In this comparison, measurements of H2 development in Dulbecco's modified Eagle's medium showed to be the most appropriate method, exhibiting a corrosion rate of 0.5 mm·year-1. Observed oxide and carbon contamination have a high impact on controlled degradation, suggesting that surface treatment of thin foils is necessary. The bioactivity test showed positive results; more detailed tests in this area are of interest.}, language = {en} } @article{StelzerKrenkel, author = {Stelzer, Vera and Krenkel, Lars}, title = {2D numerical investigations derived from a 3D dragonfly wing captured with a high-resolution micro-CT}, series = {Technology and health care : official journal of the European Society for Engineering and Medicine}, volume = {30}, journal = {Technology and health care : official journal of the European Society for Engineering and Medicine}, number = {1}, publisher = {IOS Press}, doi = {10.3233/THC-219010}, pages = {283 -- 289}, abstract = {BACKGROUND: Due to their corrugated profile, dragonfly wings have special aerodynamic characteristics during flying and gliding. OBJECTIVE: The aim of this study was to create a realistic 3D model of a dragonfly wing captured with a high-resolution micro-CT. To represent geometry changes in span and chord length and their aerodynamic effects, numerical investigations are carried out at different wing positions. METHODS: The forewing of a Camacinia gigantea was captured using a micro-CT. After the wing was adapted an error-free 3D model resulted. The wing was cut every 5 mm and 2D numerical analyses were conducted in Fluent® 2020 R2 (ANSYS, Inc., Canonsburg, PA, USA). RESULTS: The highest lift coefficient, as well as the highest lift-to-drag ratio, resulted at 0 mm and an angle of attack (AOA) of 5∘. At AOAs of 10∘ or 15∘, the flow around the wing stalled and a K{\´a}rm{\´a}n vortex street behind the wing becomes CONCLUSIONS: The velocity is higher on the upper side of the wing compared to the lower side. The pressure acts vice versa. Due to the recirculation zones that are formed in valleys of the corrugation pattern the wing resembles the form of an airfoil.}, language = {en} } @article{TauwaldMichelBrandtetal., author = {Tauwald, Sandra Melina and Michel, Johanna and Brandt, Marie and Vielsmeier, Veronika and Stemmer, Christian and Krenkel, Lars}, title = {Experimental studies and mathematical modeling of the viscoelastic rheology of tracheobronchial mucus from respiratory healthy patients}, series = {Multidisciplinary Respiratory Medicine}, volume = {18}, journal = {Multidisciplinary Respiratory Medicine}, number = {1}, publisher = {PAGEPress}, address = {Pavia, Italy}, issn = {2049-6958}, doi = {10.4081/mrm.2023.923}, pages = {12}, abstract = {BACKGROUND: Tracheobronchial mucus plays a crucial role in pulmonary function by providing protection against inhaled pathogens. Due to its composition of water, mucins, and other biomolecules, it has a complex viscoelastic rheological behavior. This interplay of both viscous and elastic properties has not been fully described yet. In this study, we characterize the rheology of human mucus using oscillatory and transient tests. Based on the transient tests, we describe the material behavior of mucus under stress and strain loading by mathematical models. METHODS: Mucus samples were collected from clinically used endotracheal tubes. For rheological characterization, oscillatory amplitude-sweep and frequency-sweep tests, and transient creep-recovery and stress-relaxation tests were performed. The results of the transient test were approximated using the Burgers model, the Weibull distribution, and the six-element Maxwell model. The three-dimensional microstructure of the tracheobronchial mucus was visualized using scanning electron microscope imaging. RESULTS: Amplitude-sweep tests showed storage moduli ranging from 0.1 Pa to 10000 Pa and a median critical strain of 4 \%. In frequency-sweep tests, storage and loss moduli increased with frequency, with the median of the storage modulus ranging from 10 Pa to 30 Pa, and the median of the loss modulus from 5 Pa to 14 Pa. The Burgers model approximates the viscoelastic behavior of tracheobronchial mucus during a constant load of stress appropriately (R2 of 0.99), and the Weibull distribution is suitable to predict the recovery of the sample after the removal of this stress (R2 of 0.99). The approximation of the stress-relaxation test data by a six-element Maxwell model shows a larger fit error (R2 of 0.91). CONCLUSIONS: This study provides a detailed description of all process steps of characterizing the rheology of tracheobronchial mucus, including sample collection, microstructure visualization, and rheological investigation. Based on this characterization, we provide mathematical models of the rheological behavior of tracheobronchial mucus. These can now be used to simulate mucus flow in the respiratory system through numerical approaches.}, language = {en} } @article{KrieglKrenkelShamoninChamonine, author = {Kriegl, Raphael and Krenkel, Lars and Shamonin (Chamonine), Mikhail}, title = {Preservation of wetting ridges using field-induced plasticity of magnetoactive elastomers}, series = {Journal of Colloid and Interface Science}, volume = {683}, journal = {Journal of Colloid and Interface Science}, publisher = {Elsevier}, issn = {0021-9797}, doi = {10.1016/j.jcis.2024.12.132}, pages = {1019 -- 1027}, abstract = {Hypothesis. The presence of a wetting ridge is crucial for many wetting phenomena on soft substrates. Conventional experimental observations of a wetting ridge require permanent presence of a droplet. The magnetic field-induced plasticity effect (FIPE) of soft magnetoative elastomers (MAEs) allows one to overcome this limitation. Depositing a droplet onto an MAE surface and applying a magnetic field fixes the wetting ridge in place due to the FIPE. The droplet can be removed to investigate the ridge with ease using conventional optical methods. Experiments. The wetting ridge is observed on MAEs with different shear moduli and different material thicknesses by confocal laser scanning microscopy (LSM). The preservation quality of the ridge is analyzed for several values of magnetic field from 10 mT to 270 mT. To verify the plausibilty of results obtained, the measured shape is compared to a theoretical model by Style \& Dufresne. Findings. Upon removal of the sessile droplet, the deformation remains embossed onto the MAE surface as long as the magnetic field remains applied. The height of the ridge peak on soft samples (effective shear modulus kPa) is close to the theoretical prediction for a magnetic flux density of 50 mT. The magnitude of the external magnetic field magnifies the height of the wetting ridge.}, language = {en} } @article{KloiberAnetsbergerSchultheissetal., author = {Kloiber, Jessica and Anetsberger, Viktoria and Schultheiß, Ulrich and Hornberger, Helga}, title = {High quality surfaces of magnesium alloy AZ31 by adjusting appropriate electropolishing parameters}, series = {Electrochimica Acta}, volume = {513}, journal = {Electrochimica Acta}, publisher = {Elsevier}, doi = {10.1016/j.electacta.2024.145547}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-79298}, language = {en} }