@article{PangerlMuellerRuecketal., author = {Pangerl, Jonas and M{\"u}ller, Max and R{\"u}ck, Thomas and Weigl, Stefan and Bierl, Rudolf}, title = {Characterizing a sensitive compact mid-infrared photoacoustic sensor for methane, ethane and acetylene detection considering changing ambient parameters and bulk composition (N2, O2 and H2O)}, series = {Sensors and Actuators B: Chemical}, volume = {352,1}, journal = {Sensors and Actuators B: Chemical}, publisher = {Elsevier}, doi = {10.1016/j.snb.2021.130962}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-25868}, pages = {1 -- 12}, abstract = {We present a sensitive and compact interband cascade laser (ICL) based photoacoustic setup for the detection of gaseous hydrocarbons and discuss its applicability towards trace gas analysis. We investigated the performance of the sensor for trace concentrations of methane, ethane and acetylene diluted in nitrogen. The excitation of methane and ethane was accomplished using one tunable diode laser, covering a range from 3360 to 3372 nm, which was replaced by a separate ICL at 3025 nm for acetylene detection. The influence of ambient parameters such as temperature, flow rate and pressure as well as potential cross-sensitivities towards O2 and H2O have been examined in terms of methane and acetylene detection. A series of simulations proved several of these influences to be attributed to relaxation effects. With a 3σ limit of detection (LoD) of 6.8 parts per billion (ppbV) in case of methane, 2.3 ppbV regarding ethane and 3.6 ppbV in terms of acetylene, the sensor demonstrates a great potential for applications in the field of trace gas analysis.}, language = {en} } @article{BurdinEkonomovChashinetal., author = {Burdin, Dmitrii A. and Ekonomov, Nikolai A. and Chashin, Dmitri V. and Fetisov, Leonid Y. and Fetisov, Yuri K. and Shamonin (Chamonine), Mikhail}, title = {Temperature Dependence of the Resonant Magnetoelectric Effect in Layered Heterostructures}, series = {Materials}, volume = {10}, journal = {Materials}, number = {10}, publisher = {MDPI}, doi = {10.3390/ma10101183}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-32185}, abstract = {The dependence of the resonant direct magnetoelectric effect on temperature is studied experimentally in planar composite structures. Samples of rectangular shapes with dimensions of 5 mm x 20 mm employed ferromagnetic layers of either an amorphous (metallic glass) alloy or nickel with a thickness of 20-200 m and piezoelectric layers of single crystalline langatate material or lead zirconate titanate piezoelectric ceramics with a thickness of 500 m. The temperature of the samples was varied in a range between 120 and 390 K by blowing a gaseous nitrogen stream around them. It is shown that the effective characteristics of the magnetoelectric effectsuch as the mechanical resonance frequency f(r), the quality factor Q and the magnitude of the magnetoelectric coefficient (E) at the resonance frequencyare contingent on temperature. The interrelations between the temperature changes of the characteristics of the magnetoelectric effect and the temperature variations of the following material parametersYoung's modulus Y, the acoustic quality factor of individual layers, the dielectric constant epsilon, the piezoelectric modulus d of the piezoelectric layer as well as the piezomagnetic coefficients ((n)) of the ferromagnetic layerare established. The effect of temperature on the characteristics of the nonlinear magnetoelectric effect is observed for the first time. The results can be useful for designing magnetoelectric heterostructures with specified temperature characteristics, in particular, for the development of thermally stabilized magnetoelectric devices.}, language = {en} } @article{MonkmanSindersbergerPrem, author = {Monkman, Gareth J. and Sindersberger, Dirk and Prem, Nina}, title = {Magnetically enhanced photoconductive high voltage control}, series = {ISSS Journal of Micro and Smart Systems}, volume = {11}, journal = {ISSS Journal of Micro and Smart Systems}, publisher = {Springer Nature}, doi = {10.1007/s41683-021-00088-z}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-30606}, pages = {317 -- 328}, abstract = {The recent surge of interest in electrostatic actuators, particularly for soft robotic applications, has placed increasing demands on high voltage control technology. In this respect, optoelectronic bidirectional switching and analogue regulation of high voltages is becoming increasingly important. One common problem is the leakage current due to dark resistance of the material or device used. Another is the physical size of such elements. However, their ability to provide galvanic separation makes them a very attractive alternative to conventional (wired) semiconductor elements. This paper gives an overview of available methods and devices before introducing a concept based on the combination of photoresistive and magnetoresistive effects in Gallium Arsenide that are potentially applicable to other semiconductor materials.}, language = {en} } @inproceedings{DiehlWolffFuhrmannetal., author = {Diehl, Andreas and Wolff, Lilli and Fuhrmann, Thomas and Niemetz, Michael and M{\"o}rtlbauer, Stefanie and Dirnberger, Sandra}, title = {Compact Freshmen Welcome Seminar for Engineering Students}, series = {Procedia - Social and Behavioral Sciences}, booktitle = {Procedia - Social and Behavioral Sciences}, number = {228}, publisher = {Elsevier}, doi = {10.1016/j.sbspro.2016.07.007}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-31034}, pages = {45 -- 52}, abstract = {The Faculty of Electrical Engineering and Information Technology of the OTH Regensburg developed and implemented a compact freshmen seminar for the afternoon of the first day of study. The intention of this seminar is to help the freshmen during their transition between school and study without losing lecture time in the first semester. The concept was tested with one small study group at the beginning of the summer semester 2015. To rate the impact of the seminar and to find aspects for continuous improvement an evaluation method was developed and used. Due to the good student resonance during the first run, this introduction seminar was held again in the winter semester 2015/16. It is planned to integrate this seminar as a regular session for all freshmen of the faculty curriculum and monitor the long-term effects of student motivation and success.}, language = {en} } @misc{Westner, author = {Westner, Markus}, title = {Rezension "Designed for Digital".}, series = {HMD Praxis Der Wirtschaftsinformatik}, journal = {HMD Praxis Der Wirtschaftsinformatik}, publisher = {Springer Nature}, doi = {10.1365/s40702-022-00877-6}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-38626}, language = {de} } @article{GradNadammalSchultheissetal., author = {Grad, Marius and Nadammal, Naresh and Schultheiss, Ulrich and Lulla, Philipp and Noster, Ulf}, title = {An Integrative Experimental Approach to Design Optimization and Removal Strategies of Supporting Structures Used during L-PBF of SS316L Aortic Stents}, series = {Applied Sciences}, volume = {11}, journal = {Applied Sciences}, number = {19}, publisher = {MPDL}, doi = {10.3390/app11199176}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-25612}, pages = {1 -- 22}, abstract = {One of the fundamental challenges in L-PBF of filigree geometries, such as aortic stents used in biomedical applications, is the requirement for a robust yet easily removable support structure that allows each component to be successfully fabricated without distortion. To solve this challenge, an integrative experimental approach was attempted in the present study by identifying an optimal support structure design and an optimized support removal strategy for this design. The specimens were manufactured using four different support structure designs based on the geometry exposed to the laser beam during the L-PBF. Support removal procedures included sand blasting (SB), glass bead blasting (GB), and electrochemical polishing (ECP). The two best-performing designs (line and cross) were chosen due to shorter lead times and lower material consumption. As an additional factor that indicates a stable design, the breaking load requirement to remove the support structures was determined. A modified line support with a 145° included angle was shown to be the best support structure design in terms of breaking load, material consumption, and manufacturing time. All three procedures were used to ensure residue-free support removal for this modified line support design, with ECP proving to be the most effective.}, language = {en} } @article{SternerSpecht, author = {Sterner, Michael and Specht, Michael}, title = {Power-to-Gas and Power-to-X-The History and Results of Developing a New Storage Concept}, series = {Energies}, volume = {14}, journal = {Energies}, number = {20}, publisher = {MDPI}, doi = {10.3390/en14206594}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-26202}, abstract = {Germany's energy transition, known as 'Energiewende', was always very progressive. However, it came technically to a halt at the question of large-scale, seasonal energy storage for wind and solar, which was not available. At the end of the 2000s, we combined our knowledge of both electrical and process engineering, imitated nature by copying photosynthesis and developed Power-to-Gas by combining water electrolysis with CO2-methanation to convert water and CO2 together with wind and solar power to synthetic natural gas. Storing green energy by coupling the electricity with the gas sector using its vast TWh-scale storage facility was the solution for the biggest energy problem of our time. This was the first concept that created the term 'sector coupling' or 'sectoral integration'. We first implemented demo sites, presented our work in research, industry and ministries, and applied it in many macroeconomic studies. It was an initial idea that inspired others to rethink electricity as well as eFuels as an energy source and energy carrier. We developed the concept further to include Power-to-Liquid, Power-to-Chemicals and other ways to 'convert' electricity into molecules and climate-neutral feedstocks, and named it 'Power-to-X'at the beginning of the 2010s.}, language = {en} } @article{Schiek, author = {Schiek, Roland}, title = {Excitation of nonlinear beams: from the linear Talbot effect through modulation instability to Akhmediev breathers}, series = {Optics express}, volume = {29}, journal = {Optics express}, number = {10}, publisher = {Optica Publishing Group}, address = {Washington, DC, USA}, doi = {10.1364/OE.425626}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-26049}, pages = {15830 -- 15851}, abstract = {The smooth transition between stable, Talbot-effect-dominated and modulationally unstable nonlinear optical beam propagation is described as the superposition of oscillating, growing and decaying eigenmodes of the common linearized theory of modulation instability. The saturation of the instability in form of breather maxima is embedded between eigenmode growth and decay. This explains well the changes of beam characteristics when the input intensity increases in experiments on modulation instability and breather excitation in spatial-spatial experimental platforms. An increased accuracy of instability gain measurements, a variety of interesting nonlinear beam scenarios and a more selective and well-directed breather excitation are demonstrated experimentally.}, language = {en} } @article{Schildgen, author = {Schildgen, Johannes}, title = {Interaktive Vorlesungsfolien mit SQL-Unterst{\"u}tzung}, series = {Datenbank-Spektrum}, volume = {21}, journal = {Datenbank-Spektrum}, number = {1}, publisher = {Springer Nature}, doi = {10.1007/s13222-020-00364-6}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-26059}, pages = {19 -- 27}, abstract = {Mit PowerPoint oder LaTeX Beamer erstellte Vorlesungsfolien sind meist statisch und dienen haupts{\"a}chlich der Pr{\"a}sentation von Lehrinhalten. Als Alternative dazu werden drei Erweiterungen f{\"u}r das HTML- und JavaScript-basierte Pr{\"a}sentationsframework reveal.js vorgestellt, die f{\"u}r mehr Interaktion in der Datenbankenlehre sorgen sollen: (1) Eine Live-Ausf{\"u}hrung von SQL-Anfragen und eine Darstellung des Anfrageergebnisses direkt auf der Folie; mit M{\"o}glichkeit zur Anpassung der Anfrage im Pr{\"a}sentationsbetrieb, (2) eine JSON-basierte Beschreibung von ER-Diagrammen, welche graphisch auf den Folien dargestellt werden sollen und (3) eingebettete Smartphone-Umfragen, um zwischendurch - ohne einen Kontextwechsel - Quiz-Fragen zu stellen.}, language = {de} } @article{MonkmanStrieglPremetal., author = {Monkman, Gareth J. and Striegl, Birgit and Prem, Nina and Sindersberger, Dirk}, title = {Electrical Properties of Magnetoactive Boron-Organo-Silicon Oxide Polymers}, series = {Macromolecular Chemistry and Physics}, volume = {221}, journal = {Macromolecular Chemistry and Physics}, number = {4}, publisher = {Wiley}, doi = {10.1002/macp.201900342}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-26488}, pages = {1 -- 8}, abstract = {The electrical properties of rheopectic magnetoactive composites comprising boron-organo-silicon oxide dielectric matrices containing carbonyl iron microparticles are presented for the first time. The increase in interfacial magnetocapacitance is seen to greatly exceed that experienced when using conventional elastomeric matrices such as polydimethylsiloxane. In addition to the increase in capacitance, a simultaneous and sharp decrease in the parallel electrical resistance over several orders of magnitude is also observed. The effects are time dependent but repeatable. Potential applications include magnetically controlled frequency dependent devices, magnetic sensor systems, weighting elements for neural networks, etc.}, language = {en} } @article{PremSindersbergerMonkman, author = {Prem, Nina and Sindersberger, Dirk and Monkman, Gareth J.}, title = {Infrared spectral analysis of low concentration magnetoactive polymers}, series = {Journal of Applied Polymer Science}, volume = {137}, journal = {Journal of Applied Polymer Science}, number = {7}, publisher = {Wiley}, organization = {WILEY}, issn = {1097-4628}, doi = {10.1002/app.48366}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-25913}, pages = {1 -- 7}, abstract = {This work concerns an area of magnetoactive polymer (MAP) research seldom considered. Traditionally only MAP with high concentrations of magnetic filler (typically between 10 and 90 wt\%) have been investigated. This article deals with a hitherto neglected aspect of research, namely MAP containing lower magnetic filler concentrations (1 to 3 wt\%). This article utilizes a range of spectroscopic analysis methods (Raman and FTIR) and their applicability to MAP characterization at wavelengths ranging from 2.5 to 25 mu m. Particular attention is paid to low carbonyl iron particle (CIP) concentrations in MAP for which the emergence of capillary doublets at a critical 2 wt\% concentration is revealed. This results in measurable magnetic field-dependent changes in IR absorption at a wavelength of 4.255 mu m together with a detectable CO2 susceptibility. (c) 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48366.}, language = {en} } @article{Chow, author = {Chow, Rosan}, title = {Moving forward together}, series = {Strategic Design Research Journal}, volume = {11}, journal = {Strategic Design Research Journal}, number = {2}, publisher = {OJS/PKP}, doi = {10.4013/sdrj.2018.112.14}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-29007}, pages = {167 -- 169}, language = {en} } @article{MuellerRueckJobstetal., author = {M{\"u}ller, Max and R{\"u}ck, Thomas and Jobst, Simon and Pangerl, Jonas and Weigl, Stefan and Bierl, Rudolf and Matysik, Frank-Michael}, title = {An Algorithmic Approach to Compute the Effect of Non-Radiative Relaxation Processes in Photoacoustic Spectroscopy}, series = {Photoacoustics}, volume = {26}, journal = {Photoacoustics}, publisher = {Elsevier}, doi = {10.1016/j.pacs.2022.100371}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-39935}, abstract = {Successful transfer of photoacoustic gas sensors from laboratory to real-life applications requires knowledge about potential cross-sensitivities towards environmental and gas matrix changes. Multi-dimensional calibration in case of cross-sensitivities can become very complex or even unfeasible. To address this challenge, we present a novel algorithm to compute the collision based non-radiative efficiency and phase lag of energy relaxation on a molecular level (CoNRad) for photoacoustic signal calculation. This algorithmic approach allows to calculate the entire elaxation cascade of arbitrarily complex systems, yielding a theoretical photoacoustic signal. In this work the influence of varying bulk compositions, i.e. nitrogen (N2), oxygen (O2) and water (H2O) on the photoacoustic signal during methane (CH4) detection is demonstrated. The applicability of the algorithm to other photoacoustic setups is shown exemplary by applying it to the relaxational system investigated in [1]. Hayden et al. examined the effect of water on photoacoustic carbon monoxide (CO) detection.}, language = {en} } @article{Goertler, author = {G{\"o}rtler, Michael}, title = {Rechtspopulismus als (komplexe) Problemstellung der Sozialen Arbeit}, series = {Soziale Passagen : Journal f{\"u}r Empirie und Theorie Sozialer Arbeit}, volume = {14}, journal = {Soziale Passagen : Journal f{\"u}r Empirie und Theorie Sozialer Arbeit}, publisher = {Springer Nature}, doi = {10.1007/s12592-022-00408-6}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-45323}, pages = {193 -- 199}, abstract = {Dieser Beitrag enth{\"a}lt {\"U}berlegungen zum Rechtspopulismus als (komplexe) Problemstellung der Sozialen Arbeit. Eine theoretisch-reflexive Analyse p{\"a}dagogischer und didaktischer Ans{\"a}tze, eine qualitative Analyse zu Herausforderungen und Bew{\"a}ltigungsstrategien von Fachkr{\"a}ften in der Kinder- und Jugendhilfe sowie eine Analyse aktueller Ver{\"o}ffentlichungen und Stellungnahmen im Kontext des Rechtspopulismus legen die Vermutung nahe, dass sich die Soziale Arbeit aufgrund der Komplexit{\"a}t dieses gesellschaftlichen und politischen Ph{\"a}nomens in einer Suchbewegung befindet.}, language = {de} } @article{GaertnerMarxSchubachGadereretal., author = {G{\"a}rtner, Sebastian and Marx-Schubach, Thomas and Gaderer, Matthias and Schmitz, Gerhard and Sterner, Michael}, title = {Techno-Economic Analysis of Carbon Dioxide Separation for an Innovative Energy Concept towards Low-Emission Glass Melting}, series = {energies}, volume = {16}, journal = {energies}, number = {5}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/en16052140}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-53627}, pages = {1 -- 25}, abstract = {The currently still high fossil energy demand is forcing the glass industry to search for innovative approaches for the reduction in CO2 emissions and the integration of renewable energy sources. In this paper, a novel power-to-methane concept is presented and discussed for this purpose. A special focus is on methods for the required CO2 capture from typical flue gases in the glass industry, which have hardly been explored to date. To close this research gap, process simulation models are developed to investigate post-combustion CO2 capture by absorption processes, followed by a techno-economic evaluation. Due to reduced flue gas volume, the designed CO2 capture plant is found to be much smaller (40 m3 absorber column volume) than absorption-based CO2 separation processes for power plants (12,560 m3 absorber column volume). As there are many options for waste heat utilization in the glass industry, the waste heat required for CO2 desorption can be generated in a particularly efficient and cost-effective way. The resulting CO2 separation costs range between 41 and 42 EUR/t CO2, depending on waste heat utilization for desorption. These costs are below the values of 50-65 EUR/t CO2 for comparable industrial applications. Despite these promising economic results, there are still some technical restrictions in terms of solvent degradation due to the high oxygen content in flue gas compositions. The results of this study point towards parametric studies for approaching these issues, such as the use of secondary and tertiary amines as solvents, or the optimization of operating conditions such as stripper pressure for further cost reductions potential.}, language = {en} } @article{GradNadammalTytkoetal., author = {Grad, Marius and Nadammal, Naresh and Tytko, Darius and Noster, Ulf}, title = {On the nanoindentation behavior of a TiC layer formed through thermo-reactive diffusion during hot pressing of Ti and cast iron}, series = {Materials Letters: X}, volume = {15}, journal = {Materials Letters: X}, number = {September}, publisher = {Elsevier}, address = {Amsterdam, Niederlande}, issn = {2590-1508}, doi = {10.1016/j.mlblux.2022.100161}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-50066}, pages = {1 -- 4}, abstract = {Hot pressing of pure Ti and cast iron under vacuum formed a ~15 μm wide TiC-layer through the thermoreactive diffusion process. Nanoindentation testing of the TiC-layer revealed average hardness and elastic modulus values of ~35 GPa and ~400 GPa, respectively. High-resolution indentation mapping indicated hardness change across the boundary with peak values observed within the TiC-layer. Solid state high temperature diffusion holds significant potential for developing uniform hard coatings on pure Ti/Ti-alloys.}, language = {en} } @article{ZacherlWopperSchwanzeretal., author = {Zacherl, Florian and Wopper, Christoph and Schwanzer, Peter and Rabl, Hans-Peter}, title = {Potential of the Synthetic Fuel Oxymethylene Ether (OME) for the Usage in a Single-Cylinder Non-Road Diesel Engine: Thermodynamics and Emissions}, series = {Energies}, volume = {15}, journal = {Energies}, number = {21}, publisher = {MDPI}, doi = {10.3390/en15217932}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-55350}, pages = {1 -- 26}, abstract = {Non-road sectors, such as agriculture and construction machinery, require high energy densities and flexibility in use, which is why diesel engines are mainly used. The use of climate-neutral fuels, produced from renewable energies, such as Oxymethylene Ether (OME) as a diesel substitute, can significantly reduce CO2 and pollutant emissions in these sectors. In addition to CO2 neutrality, OME also offers improved combustion characteristics compared to diesel fuel, eliminating the soot-NOx trade-off and thus enabling new opportunities in engine design and calibration. In this paper, the combustion of pure OME on a close-to-production, single-cylinder non-road diesel engine with a pump-line-nozzle injection system is analyzed. A variation of the center of combustion at constant power output was performed for diesel and OME at different operating points. Two injectors were investigated with OME. A study on ignition delay and a detailed thermodynamic analysis was carried out. In addition, the exhaust emissions CO, NOx, VOC, as well as particulate-matter, -number and -size distributions were measured. With OME, a significantly shorter ignition delay as well as a shortened combustion duration could be observed, despite a longer injection duration. In addition, the maximum injection pressure increases. VOC and CO emissions are reduced. Particulate matter was reduced by more than 99\% and particle number (>10 nm) was reduced by multiple orders of magnitude. The median of the particle size distribution shifts from 60 to 85 nm (diesel) into a diameter range of sub 23 nm (OME). A significant reduction of NOx emissions with OME enables new degrees of freedom in engine calibration and an efficiency advantage without hardware adaption.}, language = {en} } @article{TroidlSchrollDecker, author = {Troidl, Kilian and Schroll-Decker, Irmgard}, title = {Wie theoriebasiert sind Forschungsbeitr{\"a}ge zur Bildungsbeteiligung? Eine Qualitative Inhaltsanalyse ausgew{\"a}hlter Fachzeitschriften der Erwachsenen- und Weiterbildungsforschung}, series = {Zeitschrift f{\"u}r Weiterbildungsforschung}, volume = {45}, journal = {Zeitschrift f{\"u}r Weiterbildungsforschung}, publisher = {Springer Nature}, doi = {10.1007/s40955-022-00229-3}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-55460}, pages = {19}, abstract = {In der Vergangenheit wurde beklagt, dass in der empirischen Forschung zur Bildungsbeteiligung Erwachsener selten eine Integration von Theorie und Empirie erfolge und die mangelnde empirische Pr{\"u}fung eine theoretische Weiterentwicklung des Forschungsfeldes erschwere. Mittels einer Qualitativen Inhaltsanalyse von Beitr{\"a}gen ausgew{\"a}hlter Fachzeitschriften der Erwachsenen‑/Weiterbildungsforschung wurde versucht, die Aktualit{\"a}t dieser Feststellung empirisch zu {\"u}berpr{\"u}fen. Dazu wurden 38 empirische Forschungsbeitr{\"a}ge zur Bildungsbeteiligung der Jahrg{\"a}nge 2018 bis 2020 von neun Fachzeitschriften mit Peer-Review untersucht. Die Einsch{\"a}tzung der Beitr{\"a}ge erfolgte hinsichtlich des Grades der Theorieeinbindung. Die Ergebnisse der Analyse zeigen ein gemischtes Bild: neun Beitr{\"a}ge (24 \%) binden keine Theorie in den Forschungsprozess ein, ein Beitrag (3 \%) zitiert Theorie lediglich, ohne sie weiter einzubinden. Am h{\"a}ufigsten ist eine Einbindung zum theoriegeleiteten Vorgehen (16 Beitr{\"a}ge, 42 \%). Eine tiefergehende Theorieanwendung findet sich in sechs Beitr{\"a}gen (16 \%). Eine theoriepr{\"u}fende oder -bildende Einbindung liegt mit je drei Beitr{\"a}gen (je 8 \%) seltener vor. Die rezipierten Theorien sind vielf{\"a}ltig: es werden 20 verschiedene Theorieans{\"a}tze festgestellt. Den Forderungen nach einer verst{\"a}rkten Einbindung von Theorie in den Forschungsprozess kann somit weiterhin G{\"u}ltigkeit attestiert werden: ein substanzieller Teil der Beitr{\"a}ge berichtet keine Theorieeinbindung, eine empirische Pr{\"u}fung oder Weiterentwicklung findet relativ selten statt.}, subject = {Erwachsenenbildung}, language = {de} } @article{HaugSchnellScharfetal., author = {Haug, Sonja and Schnell, Rainer and Scharf, Anna and Altenbuchner, Amelie and Weber, Karsten}, title = {Bereitschaft zur Impfung mit einem COVID-19-Vakzin - Risikoeinsch{\"a}tzung, Impferfahrungen und Einstellung zu Behandlungsverfahren}, series = {Pr{\"a}vention und Gesundheitsf{\"o}rderung}, volume = {17}, journal = {Pr{\"a}vention und Gesundheitsf{\"o}rderung}, number = {4}, publisher = {Springer Nature}, doi = {10.1007/s11553-021-00908-y}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-154}, pages = {537 -- 544}, abstract = {Hintergrund Impfungen stellen eine bedeutende Pr{\"a}ventionsmaßnahme dar. Grundlegend f{\"u}r die Eind{\"a}mmung der Coronapandemie mittels Durchimpfung der Gesellschaft ist eine ausgepr{\"a}gte Impfbereitschaft. Ziel der Arbeit Die Impfbereitschaft mit einem COVID‑19-Vakzin (Impfstoff gegen das Coronavirus) und deren Einflussfaktoren werden anhand einer Zufallsstichprobe der Gesamtbev{\"o}lkerung in Deutschland untersucht. Material und Methoden Die Studie basiert auf einer telefonischen Zufallsstichprobe und ber{\"u}cksichtigt {\"a}ltere und vorerkrankte Personen ihrem Bev{\"o}lkerungsanteil entsprechend. Die Ein-Themen-Bev{\"o}lkerungsbefragung zur Impfbereitschaft (n = 2014) wurde im November/Dezember 2020 durchgef{\"u}hrt. Ergebnisse Die Impfbereitschaft in der Stichprobe liegt bei rund 67 \%. Vorerfahrungen mit Impfungen moderieren die Impfbereitschaft. Sie steigt bei Zugeh{\"o}rigkeit zu einer Risikogruppe. Der Glaube an die Wirksamkeit alternativer Heilmethoden und Bef{\"u}rwortung alternativer Behandlungsverfahren geht mit geringerer Impfbereitschaft einher. {\"A}ltere Menschen sind impfbereiter, kovariierend mit ihrer Einsch{\"a}tzung h{\"o}herer Gef{\"a}hrdung bei Erkrankung. Ebenso ist die Ablehnung einer Impfung mit der {\"U}bersch{\"a}tzung von Nebenwirkungen assoziiert. Schlussfolgerung Die Impfbereitschaft h{\"a}ngt mit Impferfahrungen und Einstellungen zu Gesundheitsbehandlungsverfahren allgemein zusammen. Die {\"U}bersch{\"a}tzung der H{\"a}ufigkeit ernsthafter Nebenwirkungen bei Impfungen weist auf weit verbreitete Fehlinformationen hin.}, language = {de} } @article{AltenbuchnerHaugSchnelletal., author = {Altenbuchner, Amelie and Haug, Sonja and Schnell, Rainer and Scharf, Anna and Weber, Karsten}, title = {Impfbereitschaft von Eltern mit einem COVID-19-Vakzin}, series = {P{\"a}diatrie \& P{\"a}dologie. {\"O}sterreichische Zeitschrift f{\"u}r Kinder- \& Jugendheilkunde}, volume = {56}, journal = {P{\"a}diatrie \& P{\"a}dologie. {\"O}sterreichische Zeitschrift f{\"u}r Kinder- \& Jugendheilkunde}, number = {5}, publisher = {Springer Nature}, doi = {10.1007/s00608-021-00925-2}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-196}, pages = {230 -- 234}, abstract = {Hintergrund: Eltern stehen im Rahmen der eigenen Impfung und der Kinderimpfung mit einem COVID-19-Vakzin vor einer Impfentscheidung. Zum aktuellen Zeitpunkt gibt es keine (vollst{\"a}ndige) Impfempfehlung. Fragestellung: Die Studie untersucht die Impfbereitschaft von Eltern minderj{\"a}hriger Kinder und Personen ohne minderj{\"a}hrige Kinder, wobei insbesondere Geschlechtsunterschiede {\"u}berpr{\"u}ft werden. Methoden: Die Studie basiert auf einer Zufallsstichprobe (Telefon-Survey, n = 2014, Erhebung zwischen 12.11.2020 und 10.12.2020). Die Auswertung st{\"u}tzt sich insbesondere auf die Teilstichprobe von Personen mit minderj{\"a}hrigen Kindern im Haushalt (n = 461). Ergebnisse: Eltern weisen durchg{\"a}ngig eine geringere Impfbereitschaft mit einem COVID-19-Vakzin auf als Befragte ohne minderj{\"a}hrige Kinder (54,1 \% vs. 71,1 \%). V{\"a}ter weisen eine st{\"a}rker ausgepr{\"a}gte eigene Impfbereitschaft auf als M{\"u}tter. Dar{\"u}ber hinaus sind M{\"a}nner eher als Frauen bereit, das eigene Kind mit einem COVID-19-Vakzin impfen zu lassen. Schlussfolgerungen: Bei Eltern und insbesondere M{\"u}ttern ist eine erhebliche Fehleinsch{\"a}tzung von Impfrisiken und h{\"a}ufiger Glaube an Impfverschw{\"o}rungstheorien zu beobachten. Empfohlen werden anschauliche und leicht verst{\"a}ndliche Informationen {\"u}ber die Wirkung und Nebenwirkungen der Impfung mit einem COVID-19-Vakzin durch zust{\"a}ndige Institutionen und {\"A}rzte.}, language = {de} } @article{AltenbuchnerHaugWeber, author = {Altenbuchner, Amelie and Haug, Sonja and Weber, Karsten}, title = {Die ersten Schritte nach einer h{\"u}ftnahen Fraktur}, series = {Zeitschrift f{\"u}r Gerontologie und Geriatrie}, volume = {54}, journal = {Zeitschrift f{\"u}r Gerontologie und Geriatrie}, publisher = {Springer Nature}, issn = {0948-6704}, doi = {10.1007/s00391-021-01861-3}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-14251}, pages = {555 -- 560}, abstract = {Nach einer Fraktur ist Mobilisierung Behandlungsziel und Therapies{\"a}ule. Das Festlegen von Outcomes basiert jedoch auf vielen Unsicherheiten, da Assessments nicht f{\"u}r alle Patient/-innen geeignet sind. Sie k{\"o}nnen agesabh{\"a}ngig beeinflusst und subjektiv gepr{\"a}gt sein. Sensorbasiertes Bewegungsmonitoring bietet eine Erg{\"a}nzung zur Operationalisierung der Gehf{\"a}higkeit. F{\"u}r L{\"a}ngsschnittuntersuchungen, die auch im h{\"a}uslichen Umfeld durchgef{\"u}hrt werden, eignet sich die t{\"a}gliche Schrittzahl als Variable. Sie kann durch einen handels{\"u}blichen Fitnesstracker beobachtet werden.}, language = {de} } @article{SchoenbergerScherzingerMauerer, author = {Sch{\"o}nberger, Manuel and Scherzinger, Stefanie and Mauerer, Wolfgang}, title = {Ready to Leap (by Co-Design)? Join Order Optimisation on Quantum Hardware}, series = {Proceedings of the ACM on Management of Data, PACMMOD}, volume = {1}, journal = {Proceedings of the ACM on Management of Data, PACMMOD}, number = {1}, publisher = {ACM}, address = {New York, NY,}, doi = {10.1145/3588946}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-56634}, pages = {1 -- 27}, abstract = {The prospect of achieving computational speedups by exploiting quantum phenomena makes the use of quantum processing units (QPUs) attractive for many algorithmic database problems. Query optimisation, which concerns problems that typically need to explore large search spaces, seems like an ideal match for the known quantum algorithms. We present the first quantum implementation of join ordering, which is one of the most investigated and fundamental query optimisation problems, based on a reformulation to quadratic binary unconstrained optimisation problems. We empirically characterise our method on two state-of-the-art approaches (gate-based quantum computing and quantum annealing), and identify speed-ups compared to the best know classical join ordering approaches for input sizes that can be processed with current quantum annealers. However, we also confirm that limits of early-stage technology are quickly reached. Current QPUs are classified as noisy, intermediate scale quantum computers (NISQ), and are restricted by a variety of limitations that reduce their capabilities as compared to ideal future quantum computers, which prevents us from scaling up problem dimensions and reaching practical utility. To overcome these challenges, our formulation accounts for specific QPU properties and limitations, and allows us to trade between achievable solution quality and possible problem size. In contrast to all prior work on quantum computing for query optimisation and database-related challenges, we go beyond currently available QPUs, and explicitly target the scalability limitations: Using insights gained from numerical simulations and our experimental analysis, we identify key criteria for co-designing QPUs to improve their usefulness for join ordering, and show how even relatively minor physical architectural improvements can result in substantial enhancements. Finally, we outline a path towards practical utility of custom-designed QPUs.}, language = {en} } @article{ThielKratzerGrimmetal., author = {Thiel, Charlotte and Kratzer, Johanna and Grimm, Benedikt and Kr{\"a}nkel, Thomas and Gehlen, Christoph}, title = {Effect of Internal Moisture and Outer Relative Humidity on Concrete Carbonation}, series = {CivilEng}, volume = {4}, journal = {CivilEng}, number = {3}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/civileng3040058}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-56091}, pages = {1039 -- 1052}, abstract = {With steadily rising CO2 concentrations in the ambient air and fast-changing concretecompositions with reduced clinker contents, the availability of reliable and accelerated concrete car-bonation tests is of crucial importance to design durable structures. This paper focuses on the effectsof moisture under accelerated conditions and the effects of different CO2 exposure conditions. Mor-tar prisms incorporating three different cement types were cured and stored at either 50\% or 65\%relative humidity (RH). Afterwards, the prisms were carbonated at different ambient humidities(50, 57 and 65\%), different CO2 concentrations (0.04, 1 and 3 vol.\%) and complemented by a seriesof tests at increased gas pressure (2 barg). High-resolution test methods were used to explain theunderlying carbonation mechanisms. The results show that pre-conditioning for two weeks—ascurrently suggested by the European Standard—seems to be too short because the initial inner mois-ture content severely affects the carbonation rate. Relative humidity during carbonation of 57\% ledto higher carbonation rates compared to 50\% and 65\%. In addition, climate data needs to be period-ically (preferably permanently) recorded in research experiments and in laboratory testing to ensurefair interpretation of experimental results.}, language = {en} } @article{KaessStrahringerWestner, author = {K{\"a}ss, Sebastian and Strahringer, Susanne and Westner, Markus}, title = {Practitioners' Perceptions on the Adoption of Low Code Development Platforms}, series = {IEEE Access}, journal = {IEEE Access}, publisher = {IEEE}, issn = {2169-3536}, doi = {10.1109/ACCESS.2023.3258539}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-59170}, pages = {30}, abstract = {Organizations are under increasing pressure to develop applications within budget and time at high quality. Therefore, multiple organizations adopt Low Code Development Platforms (LCDP) to develop applications faster and cheaper compared to traditional application development. However, current research on LCDP adoption lacks empirical grounding as well as a deeper understanding of the importance of adoption drivers and inhibitors. We conducted semi-structured interviews and a Delphi study with seventeen experts to address these gaps. As a result, we identified twelve drivers and nineteen inhibitors for adopting LCDPs. We show that the experts have a consensus on the most and the least important drivers and inhibitors for LCDP adoption. Yet, the ranking of the drivers and inhibitors between the most and least important is highly context dependent. For some drivers and inhibitors, the experts' ranking is similar to academic literature, whereas, for others, it differs. In conclusion, the study at hand empirically validates drivers and inhibitors for LCDP adoption, adds six new drivers and six new inhibitors to the body of knowledge, and analyses the importance of these factors.}, language = {en} } @article{SchliermannRockSchrollDecker, author = {Schliermann, Rainer and Rock, Jasmin and Schroll-Decker, Irmgard}, title = {Erwerb von sozialer und emotionaler Kompetenz im Bachelorstudium der Sozialen Arbeit: Eine explorative Ann{\"a}herung}, series = {Zeitschrift f{\"u}r Bildungsforschung}, volume = {13}, journal = {Zeitschrift f{\"u}r Bildungsforschung}, number = {1}, publisher = {Springer Nature}, doi = {10.1007/s35834-023-00396-4}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-59260}, pages = {335 -- 350}, language = {de} } @article{DotterHaugWeberetal., author = {Dotter, Caroline and Haug, Sonja and Weber, Karsten and Schnell, Rainer and Scharf, Anna and Altenburcher, Amelie}, title = {Analyzing factors determining vaccination willingness against COVID-19 in Germany 2020}, series = {Vaccine: X}, volume = {14}, journal = {Vaccine: X}, publisher = {Elsevier}, doi = {10.1016/j.jvacx.2023.100342}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-62900}, pages = {6}, abstract = {The study is based on a German single-topic population survey on vaccination willingness against COVID-19 (VWC) by the authors (2020, n = 2014). The single-topic survey allowed us to test several competing explanations for VWC, as discussed in the literature. The VWC in the sample was 67.3\%. Logistic regression was used to identify factors affecting VWC. Being at high risk from COVID-19 and having received flu vaccination have a positive impact on VWC. Perceived VWC of friends has a strong positive effect on respondents' VWC. Bivariate relationships of gender, age, and level of education with VWC were no longer significant in a multivariate analysis. Trust in alternative medicine and belief in conspiracy theories have a negative effect on VWC.}, language = {en} } @article{WiesentSchultheissLullaetal., author = {Wiesent, Lisa and Schultheiß, Ulrich and Lulla, Philipp and Nonn, Aida and Noster, Ulf}, title = {Mechanical properties of small structures built by selective laser melting 316 L stainless steel - a phenomenological approach to improve component design}, series = {Materials Science \& Engineering Technology}, volume = {51}, journal = {Materials Science \& Engineering Technology}, number = {12}, publisher = {Wiley}, doi = {10.1002/mawe.202000038}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-14718}, pages = {1615 -- 1629}, abstract = {Experimental investigations are conducted to quantify the influence of specimen thickness and orientation on the mechanical properties of selective laser melted stainless steel 316 L. The results indicate that the mechanical strength and ductility increase with increasing specimen thickness until a saturation value is reached from a specimen thickness of about 2 mm. Specimen orientation dependency is pronounced for thin specimens (<1.5 mm), whereas only small deviations in strength are observed for thicker specimens with orientations of 30°, 45° and 90° to build direction. The mechanical properties of the specimen orientation of 0° to build direction shows great deviation to the other orientations and the smallest overall strength. A reliable design of selective laser melted components should account for specimen thickness and orientation, e. g. by a correction factor. Furthermore, it is recommended to avoid loads vertical (90°) and parallel (0°) to build direction to guarantee higher ductility and strength.}, language = {en} } @article{HaugVetter, author = {Haug, Sonja and Vetter, Miriam}, title = {Altersgerechtes Wohnen im Quartier}, series = {Standort - Zeitschrift f{\"u}r angewandte Geographie}, volume = {45}, journal = {Standort - Zeitschrift f{\"u}r angewandte Geographie}, publisher = {Springer Nature}, issn = {1432-220X}, doi = {10.1007/s00548-020-00678-3}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-20050}, pages = {11 -- 17}, abstract = {Im Alter nimmt das Quartier aufgrund geringerer Aktionsradien an Bedeutung zu. Der Beitrag befasst sich mit der Frage, welche Besonderheiten sich bei Senioren-Haushalten im Hinblick auf Wohnen und soziale Teilhabe zeigen. Aus dem Projekt MAGGIE werden Ergebnisse einer schriftlichen Haushaltsbefragung (N=195) in der Wohngenossenschaft Margaretenau Regensburg dargestellt. Hierbei wird auf die aktuelle und zuk{\"u}nftige Wohnsituation, den Ver{\"a}nderungsbedarf, den Wunsch nach Gemeinschaftsangeboten und die soziale Einbettung eingegangen. Es zeigt sich eine geringe Ver{\"a}nderungsbereitschaft und ein {\"u}berdurchschnittlich hohes Maß an lokalem Sozialkapital. Am Ende werden Schlussfolgerungen f{\"u}r das Sanierungs- und Quartiersmanagement gezogen.}, subject = {Alter}, language = {de} } @article{PremSindersbergerStriegletal., author = {Prem, Nina and Sindersberger, Dirk and Striegl, Birgit and B{\"o}hm, Valter and Monkman, Gareth J.}, title = {Shape memory effects using magnetoactive Boron-organo-silicon oxide polymers}, series = {Macromolecular Chemistry and Physics}, volume = {221}, journal = {Macromolecular Chemistry and Physics}, number = {15}, publisher = {Wiley}, doi = {10.1002/macp.202000149}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-23205}, pages = {1 -- 8}, abstract = {Thermomechanical shape memory materials have certain disadvantages when it comes to 3D volumetric reproduction intended for rapid prototyping or robotic prehension. The need to constantly supply energy to counteract elastic retraction forces in order to maintain the required geometry, together with the inability to achieve conformal stability at elevated temperatures, limits the application of thermal shape memory polymers. Form removal also presents problems as most viscoelastic materials do not ensure demolding stability. This work demonstrates how magnetoactive boron-organo-silicon oxide polymers under the influence of an applied magnetic field can be used to achieve energy free sustainable volumetric shape memory effects over extended periods. The rheopectic properties of boron-organo-silicon oxide materials sustain form removal without mold distortion.}, language = {en} } @article{PangerlSukulRuecketal., author = {Pangerl, Jonas and Sukul, Pritam and R{\"u}ck, Thomas and Fuchs, Patricia and Weigl, Stefan and Miekisch, Wolfram and Bierl, Rudolf and Matysik, Frank-Michael}, title = {An inexpensive UV-LED photoacoustic based real-time sensor-system detecting exhaled trace-acetone}, series = {Photoacoustics}, volume = {38}, journal = {Photoacoustics}, publisher = {Elsevier}, issn = {2213-5979}, doi = {10.1016/j.pacs.2024.100604}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-71279}, pages = {12}, abstract = {n this research we present a low-cost system for breath acetone analysis based on UV-LED photoacoustic spectroscopy. We considered the end-tidal phase of exhalation, which represents the systemic concentrations of volatile organic compounds (VOCs) - providing clinically relevant information about the human health. This is achieved via the development of a CO2-triggered breath sampling system, which collected alveolar breath over several minutes in sterile and inert containers. A real-time mass spectrometer is coupled to serve as a reference device for calibration measurements and subsequent breath analysis. The new sensor system provided a 3σ detection limit of 8.3 ppbV and an NNEA of 1.4E-9 Wcm 1Hz 0.5. In terms of the performed breath analysis measurements, 12 out of 13 fell within the error margin of the photoacoustic measurement system, demonstrating the reliability of the measurements in the field.}, language = {en} } @article{MaierSchlattlGuessetal., author = {Maier, Robert and Schlattl, Andreas and Guess, Thomas and Mottok, J{\"u}rgen}, title = {CausalOps - Towards an industrial lifecycle for causal probabilistic graphical models}, series = {Information and Software Technology}, journal = {Information and Software Technology}, publisher = {Elsevier}, issn = {0950-5849}, doi = {10.1016/j.infsof.2024.107520}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-73350}, abstract = {Context: Causal probabilistic graph-based models have gained widespread utility, enabling the modeling of cause-and-effect relationships across diverse domains. With their rising adoption in new areas, such as safety analysis of complex systems, software engineering, and machine learning, the need for an integrated lifecycle framework akin to DevOps and MLOps has emerged. Currently, such a reference for organizations interested in employing causal engineering is missing. This lack of guidance hinders the incorporation and maturation of causal methods in the context of real-life applications. Objective: This work contextualizes causal model usage across different stages and stakeholders and outlines a holistic view of creating and maintaining them within the process landscape of an organization. Method: A novel lifecycle framework for causal model development and application called CausalOps is proposed. By defining key entities, dependencies, and intermediate artifacts generated during causal engineering, a consistent vocabulary and workflow model to guide organizations in adopting causal methods are established. Results: Based on the early adoption of the discussed methodology to a real-life problem within the automotive domain, an experience report underlining the practicability and challenges of the proposed approach is discussed. Conclusion: It is concluded that besides current technical advancements in various aspects of causal engineering, an overarching lifecycle framework that integrates these methods into organizational practices is missing. Although diverse skills from adjacent disciplines are widely available, guidance on how to transfer these assets into causality-driven practices still need to be addressed in the published literature. CausalOps' aim is to set a baseline for the adoption of causal methods in practical applications within interested organizations and the causality community.}, language = {en} } @article{HaugAltenbuchnerWeber, author = {Haug, Sonja and Altenbuchner, Amelie and Weber, Karsten}, title = {Elektronische Patientenakte und Freigabe von Gesundheitsdaten}, series = {P{\"a}diatrie \& P{\"a}dologie}, journal = {P{\"a}diatrie \& P{\"a}dologie}, publisher = {Springer}, issn = {0030-9338}, doi = {10.1007/s00608-024-01237-x}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-73847}, abstract = {Hintergrund In Deutschland wird die elektronische Patientenakte (ePA) eingef{\"u}hrt. Fragestellung Untersucht werden Nutzungsbereitschaft der ePA, Einstellung zu Gesundheitsdaten und Daten{\"u}bermittlung bei Personen mit und ohne Kinder. Methoden Telefonbefragung bei einer Zufallsstichprobe der Bev{\"o}lkerung in Deutschland (2022, n = 1308). Ergebnisse Die ePA ist bei Haushalten mit Kindern mehrheitlich unbekannt. Ihre Nutzungsbereitschaft der ePA und die Zustimmung zur Speicherung von Gesundheitsdaten ist geringer, aber sie sind h{\"a}ufiger als Haushalte ohne Kinder bereit zur Freigabe ihrer Gesundheitsdaten f{\"u}r die Forschung. Schlussfolgerung Es besteht Aufkl{\"a}rungsbedarf {\"u}ber die Speicherung von Gesundheitsdaten. Gew{\"u}nscht wird zunehmend eine digitale Arzt-Patienten-Kommunikation.}, language = {de} } @article{BauerSterner, author = {Bauer, Franz and Sterner, Michael}, title = {Impacts of lifestyle changes on energy demand and greenhouse gas emissions in Germany}, series = {Renewable and Sustainable Energy Reviews}, volume = {207}, journal = {Renewable and Sustainable Energy Reviews}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1364-0321}, doi = {10.1016/j.rser.2024.114944}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-77682}, pages = {17}, abstract = {Most energy scenario studies typically focus on technological options and fuel substitution for decarbonising future energy systems. Lifestyle changes are rarely considered, although they can significantly reduce energy demand and climate change mitigation efforts. By using an energy system model, this study shows that it is possible to reduce final energy demand in Germany by 61 \% in 2050 relative to 2019 levels, resulting in an annual per capita energy demand of 44 GJ for a representative country of the Global North. This goal can be achieved through a combination of technological measures and lifestyle changes without sacrificing a decent standard of living. Societal chances can eliminate reliance on not-yet-established negative emission technologies, reduce energy dependency, and reduce the need for energy-intensive hydrogen and e-fuels. Downsizing the energy system provides an opportunity for strengthening climate change mitigation, decrease material demand and reduce land use.}, language = {en} } @article{AlbrechtHellerbrandWeiningeretal., author = {Albrecht, Sophie Viktoria and Hellerbrand, Stefan and Weininger, Florian and Thiel, Charlotte}, title = {Strategies for Minimizing Environmental Impact in Construction: A Case Study of a Cementitious 3D Printed Lost Formwork for a Staircase}, series = {materials}, volume = {18}, journal = {materials}, publisher = {MDPI}, doi = {10.3390/ma18040825}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-79236}, pages = {18}, abstract = {The construction industry faces significant challenges, including environmental sustainability, rising material costs, and a shortage of skilled labor. Digital fabrication technologies offer innovative solutions to address these issues by reducing raw material consumption and waste generation. Among these, 3D printing technologies offer distinct advantages over traditional construction methods, particularly in handling complex geometries. However, the significant environmental impact of cement in 3D printed concrete, due to its high rheological and printability requirements, remains a concern. This study introduces a novel application of 3D printed permanent formwork in the construction of a winder staircase, assessed through an Environmental Life Cycle Assessment (LCA) from cradle to gate. By comparing the environmental impacts of various construction materials and processes, this study highlights the comparative advantages and disadvantages of conventional methods versus 3D printing. The LCA results reveal that traditional production methods, particularly those using plywood formwork, exhibit higher environmental impacts. In contrast, timber formwork performs better than most 3D printed mixtures in terms of Global Warming Potential (GWP), Acidification Potential (AP), and abiotic depletion potential (ADP). The findings of this study underscore the potential of additive manufacturing for sustainable construction, particularly through the use of low-clinker cement in 3D printed formwork, offering a promising pathway towards reducing the environmental footprint of construction activities}, language = {en} } @article{EscherRueckJobstetal., author = {Escher, Lukas and R{\"u}ck, Thomas and Jobst, Simon and Pangerl, Jonas and Bierl, Rudolf and Matysik, Frank-Michael}, title = {Photodissociation-Driven Photoacoustic Spectroscopy with UV-LEDs for Ozone Detection}, series = {Photoacoustics}, volume = {43}, journal = {Photoacoustics}, publisher = {Elsevier BV}, issn = {2213-5979}, doi = {10.1016/j.pacs.2025.100718}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-80076}, pages = {16}, abstract = {This study presents the development and evaluation of a UV-LED based photoacoustic (PA) measurement system for ozone (O3) detection to demonstrate its potential for low-cost and accurate sensing while for the first time addressing the importance of photodissociation for PA signal generation for O3 in the UV range. With a detection limit of 7.9 ppbV, the system exhibits a significant advancement over state-of-the-art UV-PA O3 detection and is on par with laser-based setups. Following a novel discussion of the PA signal arising from photodissociation and its products, cross-sensitivity effects due to environmental factors such as temperature and gas composition were systematically analyzed. A digital twin driven compensation for these influences was implemented and evaluated. Despite the challenges associated with modeling the effects of H2O and CO2, the PA system shows considerable potential, though further studies in real world applications must be conducted.}, language = {en} } @article{WestnerReichenederMatschi, author = {Westner, Markus and Reicheneder, Matthias and Matschi, Markus}, title = {From Captive Centers to Global Integration}, series = {Information Resources Management Journal}, volume = {38}, journal = {Information Resources Management Journal}, number = {1}, publisher = {IGI Global}, issn = {1533-7979}, doi = {10.4018/IRMJ.373322}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-80406}, pages = {25}, abstract = {Contemporary developments in virtual work and global talent management are transforming information technology (IT) nearshoring and offshoring practices, yet research on organizational responses remains limited. Through expert interviews with 33 IT executives (76\% chief information officers) from Germany's top 500 companies, this article examines organizational models, strategies, and good practices in IT nearshoring and offshoring. It reveals a shift from traditional captive centers toward fully integrated global teams, enabling high-value task delivery and reflecting increased workforce maturity. Companies are expanding their operations driven by talent needs rather than cost savings, with success factors including employee integration and robust on-site management. This study contributes to theory and practice by providing a framework for understanding organizational models in global IT delivery and offering actionable insights for executives, emphasizing workforce integration over geographical separation.}, subject = {Offshoring}, language = {en} } @article{HauslerHolznerEhrnspergeretal., author = {Hausler, Peter and Holzner, Lukas and Ehrnsperger, Matthias and Bierl, Rudolf}, title = {Evaluation of the creep strength of samples produced by fused deposition modeling}, series = {Open Engineering}, volume = {14}, journal = {Open Engineering}, number = {1}, publisher = {de Gruyter}, doi = {10.1515/eng-2024-0084}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-79760}, pages = {10}, abstract = {Data sheets for 3D printing materials typically include softening temperature, impact strength, tensile strength, and stiffness. However, creep strength, an important parameter for components used over an extended period, is usually not included. Nevertheless, this parameter is of significant importance for components that are used over an extended period of time.This study compares the long-term creep behavior of a selection of materials that are commonly used in fused deposition modeling 3D printing. The materials under investigation are acrylonitrile butadiene styrene, acrylonitrile styrene acrylate, polylactic acid, and polycarbonate. In addition, the influence of fiber reinforcements on these materials is also examined. A simple, reproducible test procedure is proposed for users to determine and compare creep resistance of materials. This enables developers to select materials suitable for their own requirements on creep resistance and allows 3D-printing users to compare different materials. Results suggest that fiber reinforcement generally improves creep stability in 3D-printing materials, with GreenTEC Pro Carbon and add:north PC Blend HT LCF showing the most promise in this study.}, language = {en} } @article{KastenmeierSieglEhrlichetal., author = {Kastenmeier, Andreas and Siegl, Marco and Ehrlich, Ingo and Gebbeken, Norbert}, title = {Review of elasto-static models for three-dimensional analysis of thick-walled anisotropic tubes}, series = {Journal of Composite Materials}, journal = {Journal of Composite Materials}, publisher = {Sage}, doi = {10.1177/00219983231215863}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-67521}, abstract = {Most shell or beam models of anisotropic tubes under bending have no validity for thick-walled structures. As a result, the need to develop three-dimensional formulations which allow a change in the stress, strain and displacement distributions across the radial component arises. Basic formulations on three-dimensional anisotropic elasticity were made either stressor displacement-based by Lekhnitskii or Stroh on plates. Lekhnitskii also was the first to expand these analytical formulations to tubes under various loading conditions. This paper presents a review of the stress and strain analysis of tube models using three-dimensional anisotropic elasticity. The focus lies on layered structures, like fiber-reinforced plastics, under various bending loads, although the basic formulations and models regarding axisymmetric loads are briefly discussed. One section is also dedicated to the determination of an equivalent bending stiffness of tubes.}, language = {en} } @article{HaugSchnellRaptisetal., author = {Haug, Sonja and Schnell, Rainer and Raptis, Georgios and Dotter, Caroline and Weber, Karsten}, title = {Wissen und Einstellung zur Speicherung und Nutzung von Gesundheitsdaten: Ergebnisse einer Bev{\"o}lkerungsbefragung}, series = {Zeitschrift f{\"u}r Evidenz, Fortbildung und Qualit{\"a}t im Gesundheitswesen}, journal = {Zeitschrift f{\"u}r Evidenz, Fortbildung und Qualit{\"a}t im Gesundheitswesen}, publisher = {Elsevier}, issn = {1865-9217}, doi = {10.1016/j.zefq.2023.11.001}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-67461}, pages = {50 -- 58}, abstract = {Hintergrund/Zielsetzung Der Beitrag befasst sich mit dem Wissenstand und der Einstellung der Bev{\"o}lkerung. Betrachtet werden die {\"U}bermittlung und Verf{\"u}gbarkeit von Gesundheitsdaten, Gesundheitsregister, die elektronische Patientenakte, Einwilligungsverfahren f{\"u}r die {\"U}bermittlung von Daten und der Zugriff auf Gesundheitsdaten zu Forschungszwecken. Methoden Die Studie basiert auf einer computergest{\"u}tzten Telefonbefragung (Dual-Frame) bei einer Zufallsstichprobe der Bev{\"o}lkerung in Deutschland im Zeitraum 01.-27.06.2022 (n = 1.308). Ergebnisse Der Wissensstand zur {\"U}bermittlung von Gesundheitsdaten an Krankenkassen ist hoch, wohingegen das Vorhandensein zentraler Sterbe-, Impf- und Gesundheitsregister sowie der Zugriff auf Gesundheitsdaten durch behandelnde {\"A}rztinnen und {\"A}rzte {\"u}bersch{\"a}tzt werden. Die Akzeptanz medizinischer Register ist sehr hoch. Die elektronische Patientenakte ist bei der H{\"a}lfte der Bev{\"o}lkerung unbekannt, die Nutzungsbereitschaft ist eher gering ausgepr{\"a}gt; bei der {\"U}bertragung von Daten wird eine Zustimmungsoption bevorzugt, und {\"u}ber achtzig Prozent w{\"u}rden die Daten der elektronischen Patientenakte zur Forschung freigeben. Drei Viertel w{\"u}rden ihre Gesundheitsdaten allgemein zur Forschung freigeben, insbesondere an Universit{\"a}ten in Deutschland, wobei meist Anonymit{\"a}t Bedingung ist. Die Bereitschaft zur Datenfreigabe steigt mit der H{\"o}he des Vertrauens in die Presse sowie in Universit{\"a}ten und Hochschulen, und sie sinkt, wenn ein Datenleck als schwerwiegend erachtet wird. Diskussion und Schlussfolgerung In Deutschland besteht, wie in anderen europ{\"a}ischen L{\"a}ndern, eine große Bereitschaft zur Freigabe von Gesundheitsdaten zu Forschungszwecken. Dagegen ist der Wunsch zur Nutzung der elektronischen Patientenakte eher gering. Ebenso niedrig ist die Akzeptanz einer Widerspruchsoption, die jedoch als Voraussetzung f{\"u}r eine erfolgreiche Einf{\"u}hrung einer elektronischen Patientenakte gilt. Vertrauen in die Forschung und staatliche Stellen, die Gesundheitsdaten verarbeiten, sind zentrale Faktoren.}, language = {en} } @article{ScharfHaugRitthaleretal., author = {Scharf, Anna and Haug, Sonja and Ritthaler, Markus and Raptis, Georgios}, title = {Chancen und Herausforderungen der Digitalisierung bei der Rehabilitation - Ergebnisse einer Befragung von Rehabilitationseinrichtungen}, series = {Die Rehabilitation: Zeitschrift f{\"u}r Praxis und Forschung in der Rehabilitation}, volume = {62}, journal = {Die Rehabilitation: Zeitschrift f{\"u}r Praxis und Forschung in der Rehabilitation}, number = {5}, publisher = {Thieme}, address = {Stuttgart}, doi = {10.1055/a-2123-1566}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-64726}, pages = {299 -- 307}, abstract = {Ziel der Studie: Ziel der Studie ist die Messung des Stands der Digitalisierung und die mit einer Anbindung an die Telematikinfrastruktur verbundenen Chancen und Herausforderungen f{\"u}r Rehabilitationseinrichtungen. Methodik: Teilstandardisierte Online-Befragung bei Tr{\"a}gern von Rehabilitationseinrichtungen in Bayern (n=33). Der Fragebogen mit 36 Fragen beinhaltet eine leicht ver{\"a}nderte Skala auf Basis des „Electronic Medical Record Adoption Model (EMRAM)". Ergebnisse: Der Digitalisierungsgrad wurde in 70 Prozent der Rehabilitationseinrichtungen mit Stufe 0 angegeben (Stufenmodell bis 7). Die {\"U}bermittlung patientenbezogener Daten (Eingang und Ausgang) erfolgt h{\"a}ufig analog, wohingegen die Verarbeitung innerhalb der Einrichtung in vielen F{\"a}llen bereits {\"u}berwiegend digital ist. Beim Anschluss an die Telematikinfrastruktur wird hoher Aufwand bei der Installation, aber auch der Schulung des Personals und der Anpassung der Arbeitsorganisation gesehen. Schlussfolgerung: Durch {\"A}nderung der gesetzlich-finanziellen Lage in Deutschland er{\"o}ffnen sich f{\"u}r Rehabilitationseinrichtungen neue M{\"o}glichkeiten einer verst{\"a}rkten Digitalisierung. H{\"u}rden h{\"a}ngen mit Anforderungen an IT-Sicherheit, Schulung des Personals und sowie dem ebenfalls geringen Digitalisierungsstand bei Krankenh{\"a}usern und {\"A}rzt*innen sowie Patient*innen zusammen, die eine digitale Daten{\"u}bermittlung erschweren.}, language = {de} } @article{Richter, author = {Richter, Stefanie}, title = {Erleben von Zukunftsunsicherheit, Armutsrisiken und prek{\"a}ren Lebenslagen im Pflegeheim}, series = {Zeitschrift f{\"u}r Gerontologie und Geriatrie}, journal = {Zeitschrift f{\"u}r Gerontologie und Geriatrie}, edition = {Online first}, publisher = {Springer}, doi = {10.1007/s00391-023-02231-x}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-64350}, pages = {1 -- 6}, abstract = {Die Situation von Menschen im Pflegeheim, die besonders dem Risiko der „pflegebedingten Verarmung" ausgesetzt sind, ist in der Forschung wenig pr{\"a}sent. Der Beitrag befasst sich mit dem Erleben von Unsicherheiten, Armut und prek{\"a}ren Lebenslagen {\"a}lterer Menschen im Heim. Grundlage liefern Daten einer ethnographischen Studie zum {\"A}lterwerden und zum Leben mit chronischen Erkrankungen. Anhand von F{\"a}llen wird ein Spektrum prek{\"a}rer Lebenslagen skizziert. Deutlich wird u. a.: Menschen mit diversen soziobiografischen Hintergr{\"u}nden k{\"o}nnen im Zuge von Hilfebed{\"u}rftigkeit und Heim{\"u}berg{\"a}ngen von Unsicherheiten, Armut und prek{\"a}ren Lebenslagen betroffen sein. Nicht zu wissen, ob das verf{\"u}gbare Geld gen{\"u}gt, um Kostensteigerungen bis zum Lebensende zu decken, kennzeichnet eine h{\"a}ufig erlebte Zukunftsunsicherheit; drohende Armut bzw. die Abh{\"a}ngigkeit von Sozialhilfe k{\"o}nnen pflege- und institutionell bedingte Verlusterfahrungen von Autonomie, Teilhabe und Lebensgestaltung versch{\"a}rfen und den Gesamtzustand weiter destabilisieren. Das Erleiden bleibt weitgehend unsichtbar; strukturelle Probleme werden individualisiert.}, language = {de} } @article{Goertler, author = {G{\"o}rtler, Michael}, title = {Bildung und Zeit im Kontext der Sozialen Arbeit : Theoretische {\"U}berlegungen zur Bedeutung von Zeit f{\"u}r Bildungsprozesse im Kontext der Sozialen Arbeit}, series = {Sozial Extra}, volume = {47}, journal = {Sozial Extra}, number = {1}, publisher = {Springer}, doi = {10.1007/s12054-023-00570-y}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-60988}, pages = {46 -- 49}, abstract = {Die Bedeutung von Zeit f{\"u}r Bildungsprozesse im Kontext der Sozialen Arbeit ist bisher wenig erforscht. Um sich dieser Fragestellung anzun{\"a}hern, werden in diesem Beitrag theoretische {\"U}berlegungen im Anschluss an Diskurse zu Bildung und Zeit in der P{\"a}dagogik angestellt. Dabei wird Zeit als erm{\"o}glichender, {\"o}konomischer und politischer Faktor diskutiert, um die Perspektive der Sozialen Arbeit auf Bildungsprozesse zu erweitern.}, language = {de} } @article{PongratzTixWolfrumetal., author = {Pongratz, Christian and Tix, Janek and Wolfrum, Johannes and Gerke, Steffen and Ehrlich, Ingo and Br{\"u}nig, Michael}, title = {Test Setup for Investigating the Impact Behavior of Biaxially Prestressed Composite Laminates}, series = {Experimental Techniques}, journal = {Experimental Techniques}, publisher = {Springer Nature}, issn = {0732-8818}, doi = {10.1007/s40799-024-00701-4}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-70355}, pages = {14 S.}, abstract = {Instrumented impact testing and compression-after-impact testing are important to adequately qualify material behavior and safely design composite structures. However, the stresses to which fiber-reinforced plastic components are typically subjected in practice are not considered in the impact test methods recommended in guidelines or standards. In this paper, a test setup for investigating the impact behavior of composite specimens under plane uniaxial and biaxial preloading is presented. For this purpose, a special test setup consisting of a biaxial testing machine and a specially designed drop-weight tower was developed. The design decisions were derived from existing guidelines and standards with the aim of inducing barely visible impact damage in laminated carbon fiber-reinforced plastic specimens. Several measurement systems have been integrated into the setup to allow comprehensive observation of the impact event and specimen behavior. A feasibility test was performed with biaxially prestressed carbon fiber-reinforced plastic specimens in comparison with unstressed reference tests. The compressive-tensile prestressing resulted in lower maximum contact forces, higher maximum deflections, higher residual deflections and a different damage pattern, which was investigated by light microscopic analysis. Finally, the functionality of the experimental setup is discussed, and the results seem to indicate that the test setup and parameters were properly chosen to investigate the effect of prestresses on the impacts behavior of composite structures, in particular for barely visible subsequent damages.}, subject = {Faserverbundwerkstoff}, language = {en} } @article{GradZentgrafSchultheissetal., author = {Grad, Marius and Zentgraf, Jan and Schultheiss, Ulrich and Esper, Lukas and Diemar, Andreas and Noster, Ulf and Spiess, Lothar}, title = {Effect of Carbon Content on the Phase Composition, Microstructure and Mechanical Properties of the TiC Layer Formed in Hot-Pressed Titanium-Steel Composites}, series = {Metals}, volume = {14}, journal = {Metals}, number = {9}, publisher = {MDPI AG}, issn = {2075-4701}, doi = {10.3390/met14090959}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-74617}, abstract = {During the hot pressing of pure titanium and different carbon steels in a temperature range of ϑ = 950-1050 °C, a compound layer up to dL≈10 μm thick is formed at the titanium-steel interface. With a higher carbon content of the used steel, the layer thickness increases. The carbon concentration within the layer is in the range of stoichiometry for TiC. Apart from TiC, no other phases can be detected by X-ray diffraction (XRD) measurements inside the formed layer. The calculation of the activation energy for the TiC layer formation is Q = 126.5-136.7 kJ mol-1 and is independent of the carbon content of the steel. The resulting microstructure has a grain size gradient, wherein the mechanical properties, such as hardness and Young's modulus, are almost constant. Statistical analysis using Response Surface Methodology (RSM) indicates that the carbon content of the steel has the most significant influence on layer thickness, followed by annealing temperature and annealing time. By selecting the appropriate carbon steel and the subsequent removal of the steel, it is possible to produce targeted TiC layers on titanium substrates, which holds enormous potential for this material in wear-intensive applications.}, language = {en} } @article{AltmannSchleglVolbert, author = {Altmann, Matthias and Schlegl, Peter and Volbert, Klaus}, title = {A low-power wireless system for energy consumption analysis at mains sockets}, series = {EURASIP Journal on Embedded Systems}, journal = {EURASIP Journal on Embedded Systems}, number = {1}, publisher = {Springer Nature}, doi = {10.1186/s13639-016-0041-y}, pages = {18}, abstract = {Introduction: Improving energy efficiency and reducing energy wastage is an important topic of our time. But it is quite difficult to figure out how much of our total electricity bill can be mapped to which device or at what time the device used it. We believe energy efficiency of normal households can be improved, if this kind of transparency would be available. In this article, we present a system for energy measurement at mains sockets to gain a transparent view of energy consumption for each device in a household. It consists of several smart energy measuring devices (SEMDs) that use a low-power radio protocol to dynamically build and connect to a radio network to transfer power usage date to a server. At the server, the data is stored and can be accessed via web interface. Results: Our primary goal was to build a back-end system for an energy metering platform with very low energy consumption. This platform can provide data for a variety of services that enables users (the consumers) to understand and improve their energy consumption behavior and increase overall energy efficiency of their households.}, language = {en} } @article{AuerSchieblIversenetal., author = {Auer, Simon and Schiebl, Jonas and Iversen, Kristoffer and Subhash Chander, Divyaksh and Damsgaard, Michael and Dendorfer, Sebastian}, title = {Biomechanical assessment of the design and efficiency of occupational exoskeletons with the AnyBody Modeling System}, series = {Zeitschrift f{\"u}r Arbeitswissenschaften}, volume = {76}, journal = {Zeitschrift f{\"u}r Arbeitswissenschaften}, number = {4}, publisher = {Springer Nature}, doi = {10.1007/s41449-022-00336-4}, pages = {440 -- 449}, abstract = {Exoskeletons were invented over 100 years ago but have only become popular in the last two decades, especially in the working industry as they can decrease work-related loads significantly. The most often used exoskeletons are for the lower back and shoulder since these are commonly affected body regions. All devices have in common that their purpose is to reduce internal loads of vulnerable body regions. Nevertheless, there is still little understanding on how biomechanical loading in the human body changes when exoskeletons are used. Therefore, further analyses are needed. A promising candidate for these are musculoskeletal models, which are based on an inverse dynamics approach and can calculate external parameters such as ground reaction forces or other interaction forces as well as internal parameters such as joint reaction forces or muscle activities. The various examples in the literature show that these models are increasingly used for assessing the biomechanical effects of exoskeletons on the human body. Furthermore, musculoskeletal models can calculate biomechanical loadings of humans with and without exoskeletons for all kinds of applications and allow an evaluation of their purpose. Practical Relevance: This article highlights the possibilities of musculoskeletal models for assessing the design and efficiency of occupational exoskeletons. Several practical use cases are described along with distinct descriptions of common implications of musculoskeletal and exoskeleton modeling.}, language = {en} } @article{MelznerPfeifferSuessetal., author = {Melzner, Maximilian and Pfeiffer, Christian and Suess, Franz and Dendorfer, Sebastian}, title = {Musculoskeletal simulation of elbow stability for common injury patterns}, series = {Journal of Orthopaedic Research}, volume = {41}, journal = {Journal of Orthopaedic Research}, number = {6}, publisher = {Wiley}, issn = {1554-527X}, doi = {10.1002/jor.25460}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-54819}, pages = {1356 -- 1364}, abstract = {Elbow stability is derived from a combination of muscular, ligamentous, and bony structures. After an elbow trauma the stability of the joint is an important decision criterion for the subsequent treatment. The decision regarding non-operative/operative care depends mostly on subjective assessments of medical experts. Therefore, the aim of this study is to use musculoskeletal simulations as an objective assessment tool to investigate the extent to which failure of different stabilizers affects the elbow stability and how these observations correspond to the assessment from clinical practice. A musculoskeletal elbow simulation model was developed for this aim. To investigate the stability of the elbow, varus/valgus moments were applied under 0°, 45°and 90° flexion while the respective cubital angle was analyzed. This was performed for nine different injury scenarios, which were also evaluated for stability by clinical experts. With the results, it can be determined by which injury pattern and under which flexion angle the elbow stability is impaired regarding varus/valgus moments. The scenario with a complete failure of the medial and lateral ligaments and a fracture of the radial head was identified as having the greatest instability. The study presented a numerical determination of elbow stability against varus/valgus moments regarding clinical injury patterns, as well as a comparison of the numerical outcome with experience gained in clinical practice. The numerical predictions agree well with the assessments of the clinical specialists. Thus, the results from musculoskeletal simulation can make an important contribution to a more objective assessment of the elbow stability.}, language = {en} } @article{ReinkerBlaesingBierletal., author = {Reinker, Lukas and Bl{\"a}sing, Dominic and Bierl, Rudolf and Ulbricht, Sabina and Dendorfer, Sebastian}, title = {Correlation of Acceleration Curves in Gravitational Direction for Different Body Segments during High-Impact Jumping Exercises}, series = {sensors}, volume = {23}, journal = {sensors}, number = {4}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/s23042276}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-58217}, abstract = {Osteoporosis is a common disease of old age. However, in many cases, it can be very well prevented and counteracted with physical activity, especially high-impact exercises. Wearables have the potential to provide data that can help with continuous monitoring of patients during therapy phases or preventive exercise programs in everyday life. This study aimed to determine the accuracy and reliability of measured acceleration data at different body positions compared to accelerations at the pelvis during different jumping exercises. Accelerations at the hips have been investigated in previous studies with regard to osteoporosis prevention. Data were collected using an IMU-based motion capture system (Xsens) consisting of 17 sensors. Forty-nine subjects were included in this study. The analysis shows the correlation between impacts and the corresponding drop height, which are dependent on the respective exercise. Very high correlations (0.83-0.94) were found between accelerations at the pelvis and the other measured segments at the upper body. The foot sensors provided very weak correlations (0.20-0.27). Accelerations measured at the pelvis during jumping exercises can be tracked very well on the upper body and upper extremities, including locations where smart devices are typically worn, which gives possibilities for remote and continuous monitoring of programs.}, language = {en} } @article{AuerKubowitschDendorfer, author = {Auer, Simon and Kubowitsch, Simone and Dendorfer, Sebastian}, title = {Kombinierter Einfluss von psychologischen und biomechanischen Faktoren auf die muskul{\"a}ren Belastungen beim Fußballspielen}, series = {Die Orthop{\"a}die}, volume = {52}, journal = {Die Orthop{\"a}die}, number = {11}, publisher = {Springer}, doi = {10.1007/s00132-023-04437-8}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-65113}, pages = {1 -- 6}, abstract = {When mental stress and musculoskeletal loading interact, the risk for injury increases due to altered body kinematics and increased muscle tension. These changes can be detected with musculoskeletal models, and mental loading and stress must be analyzed at emotional, cognitive, and behavioral levels. To investigate these kinematic and loading changes under stress, competitive athletes were subjected to mental stress during highly dynamic movements, and musculoskeletal models were used to analyze the biomechanical loading. It was shown that under mental stress, independent of the subjective perception, a strong change in muscle forces can occur. Accordingly, competitive athletes should undergo screenings to assess individual movement patterns and promote general stress resilience.}, language = {de} } @article{MelznerSuessDendorfer, author = {Melzner, Maximilian and Suess, Franz and Dendorfer, Sebastian}, title = {The impact of anatomical uncertainties on the predictions of a musculoskeletal hand model - a sensitivity study}, series = {Computer Methods in Biomechanics and Biomedical Engineering}, volume = {25}, journal = {Computer Methods in Biomechanics and Biomedical Engineering}, number = {2}, publisher = {Taylor \& Francis}, issn = {1476-8259}, doi = {10.1080/10255842.2021.1940974}, pages = {156 -- 164}, abstract = {Outputs of musculoskeletal models should be considered probabilistic rather than deterministic as they are affected by inaccuracies and estimations associated with the development of the model. One of these uncertainties being critical for modeling arises from the determination of the muscles' line of action and the physiological cross-sectional area. Therefore, the aim of this study was to evaluate the outcome sensitivity of model predictions from a musculoskeletal hand model in comparison to the uncertainty of these input parameters. For this purpose, the kinematics and muscle activities of different hand movements (abduction of the fingers, abduction of the thumb, and flexion of the thumb) were recorded. One thousand simulations were calculated for each movement using the Latin hypercube sampling method with a corresponding variation of the muscle origin/insertion points and the cross-sectional area. Comparing the standard hand to simulations incorporating uncertainties of input parameters shows no major deviations in on- and off-set time point of muscle activities. About 60\% of simulations are located within a ± 30\% interval around the standard model concerning joint reaction forces. The comparison with the variation of the input data leads to the conclusion that the standard hand model is able to provide not over-scattered outcomes and, therefore, can be considered relatively stable. These results are of practical importance to the personalization of a musculoskeletal model with subject-specific bone geometries and hence changed muscle line of action.}, subject = {Biomechanik}, language = {en} } @article{MelznerEngelhardtSimonetal., author = {Melzner, Maximilian and Engelhardt, Lucas and Simon, Ulrich and Dendorfer, Sebastian}, title = {Electromyography-Based Validation of a Musculoskeletal Hand Model}, series = {Journal of Biomechanical Engineering}, volume = {144}, journal = {Journal of Biomechanical Engineering}, number = {2}, publisher = {American Society of Mechanical Engineers, ASME}, doi = {10.1115/1.4052115}, pages = {8}, abstract = {Regarding the prevention of injuries and rehabilitation of the human hand, musculoskeletal simulations using an inverse dynamics approach allow for insights of the muscle recruitment and thus acting forces on the hand. Currently, several hand models from various research groups are in use, which are mainly validated by the comparison of numerical and anatomical moment arms. In contrast to this validation and model-building technique by cadaver studies, the aim of this study is to further validate a recently published hand model [1] by analyzing numerically calculated muscle activities in comparison to experimentally measured electromyographical signals of the muscles. Therefore, the electromyographical signals of 10 hand muscles of five test subjects performing seven different hand movements were measured. The kinematics of these tasks were used as input for the hand model, and the numerical muscle activities were computed. To analyze the relationship between simulated and measured activities, the time difference of the muscle on- and off-set points was calculated, which resulted in a mean on- and off-set time difference of 0.58 s between the experimental data and the model. The largest differences were detected for movements that mainly addressed the wrist. One major issue comparing simulated and measured muscle activities of the hand is cross-talk. Nevertheless, the results show that the hand model fits the experiment quite accurately despite some limitations and is a further step toward patient-specific modeling of the upper extremity.}, subject = {Elektromyographie}, language = {en} } @article{SaffertMelznerDendorfer, author = {Saffert, Anne-Sophie and Melzner, Maximilian and Dendorfer, Sebastian}, title = {Biomechanical analysis of the right elevated glenohumeral joint in violinists during legato-playing}, series = {Technology and Health Care}, volume = {30}, journal = {Technology and Health Care}, number = {1}, publisher = {IOS Press}, doi = {10.3233/THC-219001}, pages = {177 -- 186}, abstract = {BACKGROUND: Many statistics reveal that violin players suffer most often from musculoskeletal disorders compared to musicians of other instrument groups. A common phenomenon, especially observed in violin beginners, is the tendency to elevate the right shoulder during playing the violin. This can probably lead to serious disorders in long-term practice with repetitive movements. OBJECTIVE: For this reason, this study investigated the relationship between the right shoulder elevation and the force in the right glenohumeral joint during violin playing. It was hypothesized that the forces in the right glenohumeral joint are higher during playing with the right shoulder raised compared to playing in normal posture. METHODS: Motion capture data from four experienced violinists was recorded and processed by means of musculoskeletal simulation to get the force and elevation angle while playing with raised shoulder and in normal position. RESULTS: The results indicate that the absolute values of the resulting force, as well as the forces in the mediolateral, inferosuperior, and anteroposterior directions, are higher in playing the violin with the shoulder raised than in a normal posture. CONCLUSIONS: Elevating the right shoulder while playing the violin may pose a potential problem.}, subject = {Biomechanische Analyse}, language = {en} } @article{AuerSuessDendorfer, author = {Auer, Simon and S{\"u}ß, Franz and Dendorfer, Sebastian}, title = {Using markerless motion capture and musculoskeletal models: An evaluation of joint kinematics}, series = {Technology and Health Care}, journal = {Technology and Health Care}, publisher = {IOS Press}, issn = {0928-7329}, doi = {10.3233/THC-240202}, pages = {1 -- 10}, abstract = {BACKGROUND: This study presents a comprehensive comparison between a marker-based motion capture system (MMC) and a video-based motion capture system (VMC) in the context of kinematic analysis using musculoskeletal models. OBJECTIVE: Focusing on joint angles, the study aimed to evaluate the accuracy of VMC as a viable alternative for biomechanical research. METHODS: Eighteen healthy subjects performed isolated movements with 17 joint degrees of freedom, and their kinematic data were collected using both an MMC and a VMC setup. The kinematic data were entered into the AnyBody Modelling System, which enables the calculation of joint angles. The mean absolute error (MAE) was calculated to quantify the deviations between the two systems. RESULTS: The results showed good agreement between VMC and MMC at several joint angles. In particular, the shoulder, hip and knee joints showed small deviations in kinematics with MAE values of 4.8∘, 6.8∘ and 3.5∘, respectively. However, the study revealed problems in tracking hand and elbow movements, resulting in higher MAE values of 13.7∘ and 27.7∘. Deviations were also higher for head and thoracic movements. CONCLUSION: Overall, VMC showed promising results for lower body and shoulder kinematics. However, the tracking of the wrist and pelvis still needs to be refined. The research results provide a basis for further investigations that promote the fusion of VMC and musculoskeletal models.}, language = {en} } @article{DiermeierSindersbergerKrenkeletal., author = {Diermeier, Andreas and Sindersberger, Dirk and Krenkel, Lars and Rosell, X. C. and Monkman, Gareth J.}, title = {Controllable Magnetoactive Polymer Conduit}, series = {The Open Mechanical Engineering Journal}, volume = {12}, journal = {The Open Mechanical Engineering Journal}, number = {1}, publisher = {Bentham}, pages = {192 -- 200}, abstract = {Objective: Magneto-active Polymers (MAP) are smart materials whose mechanical characteristics, such as elastic and shear moduli, may be controllable by means of an externally applied magnetic field. Methods: Various additives may be used to influence the characteristics of the polymer matrix whilst a suspension of soft and/or hard magnetic particles determine the magnetic properties of the composite. Both pre-cure and post-cure magnetization is possible. Results: A range of control strategies have been investigated for evaluation of the system using fluids of differing kinematic viscosity. Conclusion: Depending on the degree of magnetic field homogeneity, magneto-deformation and magnetostriction contribute to MAP actuation. This paper presents a novel application in the form of a peristaltic MAP tube system, applicable to flow control and pumping of hemorheological fluids in blood circulatory systems for biomedical research purposes.}, language = {en} } @article{KoeckStrieglKrausetal., author = {K{\"o}ck, Hannah and Striegl, Birgit and Kraus, Annalena and Zborilova, Magdalena and Christiansen, Silke H. and Sch{\"a}fer, Nicole and Gr{\"a}ssel, Susanne and Hornberger, Helga}, title = {In Vitro Analysis of Human Cartilage Infiltrated by Hydrogels and Hydrogel-Encapsulated Chondrocytes}, series = {Bioengineering}, volume = {10}, journal = {Bioengineering}, publisher = {MDPI}, doi = {10.3390/bioengineering10070767}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-61235}, pages = {1 -- 21}, abstract = {Osteoarthritis (OA) is a degenerative joint disease causing loss of articular cartilage and structural damage in all joint tissues. Given the limited regenerative capacity of articular cartilage, methods to support the native structural properties of articular cartilage are highly anticipated. The aim of this study was to infiltrate zwitterionic monomer solutions into human OA-cartilage explants to replace lost proteoglycans. The study included polymerization and deposition of methacryloyloxyethyl-phosphorylcholine- and a novel sulfobetaine-methacrylate-based monomer solution within ex vivo human OA-cartilage explants and the encapsulation of isolated chondrocytes within hydrogels and the corresponding effects on chondrocyte viability. The results demonstrated that zwitterionic cartilage-hydrogel networks are formed by infiltration. In general, cytotoxic effects of the monomer solutions were observed, as was a time-dependent infiltration behavior into the tissue accompanied by increasing cell death and penetration depth. The successful deposition of zwitterionic hydrogels within OA cartilage identifies the infiltration method as a potential future therapeutic option for the repair/replacement of OA-cartilage extracellular suprastructure. Due to the toxic effects of the monomer solutions, the focus should be on sealing the OA-cartilage surface, instead of complete infiltration. An alternative treatment option for focal cartilage defects could be the usage of monomer solutions, especially the novel generated sulfobetaine-methacrylate-based monomer solution, as bionic for cell-based 3D bioprintable hydrogels.}, language = {en} } @article{HornbergerKisselStriegletal., author = {Hornberger, Helga and Kissel, Hannah and Striegl, Birgit and Kronseder, Matthias and Vollnhals, Florian and Christiansen, Silke H.}, title = {Bioactivity and corrosion behavior of magnesium barrier membranes}, series = {Materials and Corrosion}, volume = {73}, journal = {Materials and Corrosion}, number = {1}, publisher = {Wiley}, doi = {10.1002/maco.202112385}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-24499}, pages = {8 -- 19}, abstract = {In the current research, magnesium and its alloys have been intensively studied as resorbable implant materials. Magnesium materials combine their good mechanical properties with bioactivity, which make them interesting for guided bone regeneration and for the application as barrier membranes. In this study, the in vitro degradation behavior of thin magnesium films was investigated in cell medium and simulated body fluid. Three methods were applied to evaluate corrosion rates: measurements of (i) the gaseous volume evolved during immersion, (ii) volume change after immersion, and (iii) polarization curves. In this comparison, measurements of H2 development in Dulbecco's modified Eagle's medium showed to be the most appropriate method, exhibiting a corrosion rate of 0.5 mm·year-1. Observed oxide and carbon contamination have a high impact on controlled degradation, suggesting that surface treatment of thin foils is necessary. The bioactivity test showed positive results; more detailed tests in this area are of interest.}, language = {en} } @article{StelzerKrenkel, author = {Stelzer, Vera and Krenkel, Lars}, title = {2D numerical investigations derived from a 3D dragonfly wing captured with a high-resolution micro-CT}, series = {Technology and health care : official journal of the European Society for Engineering and Medicine}, volume = {30}, journal = {Technology and health care : official journal of the European Society for Engineering and Medicine}, number = {1}, publisher = {IOS Press}, doi = {10.3233/THC-219010}, pages = {283 -- 289}, abstract = {BACKGROUND: Due to their corrugated profile, dragonfly wings have special aerodynamic characteristics during flying and gliding. OBJECTIVE: The aim of this study was to create a realistic 3D model of a dragonfly wing captured with a high-resolution micro-CT. To represent geometry changes in span and chord length and their aerodynamic effects, numerical investigations are carried out at different wing positions. METHODS: The forewing of a Camacinia gigantea was captured using a micro-CT. After the wing was adapted an error-free 3D model resulted. The wing was cut every 5 mm and 2D numerical analyses were conducted in Fluent® 2020 R2 (ANSYS, Inc., Canonsburg, PA, USA). RESULTS: The highest lift coefficient, as well as the highest lift-to-drag ratio, resulted at 0 mm and an angle of attack (AOA) of 5∘. At AOAs of 10∘ or 15∘, the flow around the wing stalled and a K{\´a}rm{\´a}n vortex street behind the wing becomes CONCLUSIONS: The velocity is higher on the upper side of the wing compared to the lower side. The pressure acts vice versa. Due to the recirculation zones that are formed in valleys of the corrugation pattern the wing resembles the form of an airfoil.}, language = {en} } @article{TauwaldMichelBrandtetal., author = {Tauwald, Sandra Melina and Michel, Johanna and Brandt, Marie and Vielsmeier, Veronika and Stemmer, Christian and Krenkel, Lars}, title = {Experimental studies and mathematical modeling of the viscoelastic rheology of tracheobronchial mucus from respiratory healthy patients}, series = {Multidisciplinary Respiratory Medicine}, volume = {18}, journal = {Multidisciplinary Respiratory Medicine}, number = {1}, publisher = {PAGEPress}, address = {Pavia, Italy}, issn = {2049-6958}, doi = {10.4081/mrm.2023.923}, pages = {12}, abstract = {BACKGROUND: Tracheobronchial mucus plays a crucial role in pulmonary function by providing protection against inhaled pathogens. Due to its composition of water, mucins, and other biomolecules, it has a complex viscoelastic rheological behavior. This interplay of both viscous and elastic properties has not been fully described yet. In this study, we characterize the rheology of human mucus using oscillatory and transient tests. Based on the transient tests, we describe the material behavior of mucus under stress and strain loading by mathematical models. METHODS: Mucus samples were collected from clinically used endotracheal tubes. For rheological characterization, oscillatory amplitude-sweep and frequency-sweep tests, and transient creep-recovery and stress-relaxation tests were performed. The results of the transient test were approximated using the Burgers model, the Weibull distribution, and the six-element Maxwell model. The three-dimensional microstructure of the tracheobronchial mucus was visualized using scanning electron microscope imaging. RESULTS: Amplitude-sweep tests showed storage moduli ranging from 0.1 Pa to 10000 Pa and a median critical strain of 4 \%. In frequency-sweep tests, storage and loss moduli increased with frequency, with the median of the storage modulus ranging from 10 Pa to 30 Pa, and the median of the loss modulus from 5 Pa to 14 Pa. The Burgers model approximates the viscoelastic behavior of tracheobronchial mucus during a constant load of stress appropriately (R2 of 0.99), and the Weibull distribution is suitable to predict the recovery of the sample after the removal of this stress (R2 of 0.99). The approximation of the stress-relaxation test data by a six-element Maxwell model shows a larger fit error (R2 of 0.91). CONCLUSIONS: This study provides a detailed description of all process steps of characterizing the rheology of tracheobronchial mucus, including sample collection, microstructure visualization, and rheological investigation. Based on this characterization, we provide mathematical models of the rheological behavior of tracheobronchial mucus. These can now be used to simulate mucus flow in the respiratory system through numerical approaches.}, language = {en} } @article{KrieglKrenkelShamoninChamonine, author = {Kriegl, Raphael and Krenkel, Lars and Shamonin (Chamonine), Mikhail}, title = {Preservation of wetting ridges using field-induced plasticity of magnetoactive elastomers}, series = {Journal of Colloid and Interface Science}, volume = {683}, journal = {Journal of Colloid and Interface Science}, publisher = {Elsevier}, issn = {0021-9797}, doi = {10.1016/j.jcis.2024.12.132}, pages = {1019 -- 1027}, abstract = {Hypothesis. The presence of a wetting ridge is crucial for many wetting phenomena on soft substrates. Conventional experimental observations of a wetting ridge require permanent presence of a droplet. The magnetic field-induced plasticity effect (FIPE) of soft magnetoative elastomers (MAEs) allows one to overcome this limitation. Depositing a droplet onto an MAE surface and applying a magnetic field fixes the wetting ridge in place due to the FIPE. The droplet can be removed to investigate the ridge with ease using conventional optical methods. Experiments. The wetting ridge is observed on MAEs with different shear moduli and different material thicknesses by confocal laser scanning microscopy (LSM). The preservation quality of the ridge is analyzed for several values of magnetic field from 10 mT to 270 mT. To verify the plausibilty of results obtained, the measured shape is compared to a theoretical model by Style \& Dufresne. Findings. Upon removal of the sessile droplet, the deformation remains embossed onto the MAE surface as long as the magnetic field remains applied. The height of the ridge peak on soft samples (effective shear modulus kPa) is close to the theoretical prediction for a magnetic flux density of 50 mT. The magnitude of the external magnetic field magnifies the height of the wetting ridge.}, language = {en} } @article{KloiberAnetsbergerSchultheissetal., author = {Kloiber, Jessica and Anetsberger, Viktoria and Schultheiß, Ulrich and Hornberger, Helga}, title = {High quality surfaces of magnesium alloy AZ31 by adjusting appropriate electropolishing parameters}, series = {Electrochimica Acta}, volume = {513}, journal = {Electrochimica Acta}, publisher = {Elsevier}, doi = {10.1016/j.electacta.2024.145547}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-79298}, language = {en} } @article{KloiberSchultheissHornberger, author = {Kloiber, Jessica and Schultheiß, Ulrich and Hornberger, Helga}, title = {Impact of heat treatment on the surface quality of electropolished WE43 alloy}, series = {Materials Letters}, volume = {397}, journal = {Materials Letters}, publisher = {Elsevier BV}, issn = {0167-577X}, doi = {10.1016/j.matlet.2025.138821}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-83512}, pages = {5}, abstract = {In this study, the Mg alloy WE43 was solution annealed and precipitation hardened prior to electropolishing to evaluate the effects of different microstructures on the electropolishing result. While coarsely distributed precipitates led to surfaces showing wavy structures and dents after electropolishing, a uniform microstructure resulted in an even finish of the surface. The homogenization and refinement of the microstructure by heat treatment is a method to ensure improved electropolished surfaces of Mg materials}, language = {en} } @article{LooNagarajuPathivadaetal., author = {Loo, Xuyan and Nagaraju, Bhavana and Pathivada, Sai and Bartsch, Alexander and Schratzenstaller, Thomas and Sattler, Robert and Monkman, Gareth J.}, title = {Electrical properties of bisphenol-A-free magnetoactive borosilicate polymers}, series = {AIP Advances}, volume = {14}, journal = {AIP Advances}, number = {5}, publisher = {AIP Publishing}, issn = {2158-3226}, doi = {10.1063/5.0203017}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-72936}, abstract = {The recent REACH regulations require the elimination of bisphenol-A and titanium dioxide from commercially available boron-based polymers. This has led to changes in some of the mechanical characteristics, which strongly influence the properties of magnetoactive borosilicate polymers. This work delivers results on the electrical properties and discusses some implications for future research using bisphenol-A and titanium-dioxide-free substitutes.}, language = {en} } @article{WiesentSchultheissLullaetal., author = {Wiesent, Lisa and Schultheiß, Ulrich and Lulla, Philipp and Noster, Ulf and Schratzenstaller, Thomas and Schmid, Christof and Nonn, Aida and Spear, Ashley}, title = {Computational analysis of the effects of geometric irregularities and post-processing steps on the mechanical behavior of additively manufactured 316L stainless steel stents}, series = {PLoS ONE}, volume = {15}, journal = {PLoS ONE}, number = {12}, publisher = {PLOS}, doi = {10.1371/journal.pone.0244463}, pages = {1 -- 30}, abstract = {Advances in additive manufacturing enable the production of tailored lattice structures and thus, in principle, coronary stents. This study investigates the effects of process-related irregularities, heat and surface treatment on the morphology, mechanical response, and expansion behavior of 316L stainless steel stents produced by laser powder bed fusion and provides a methodological approach for their numerical evaluation. A combined experimental and computational framework is used, based on both actual and computationally reconstructed laser powder bed fused stents. Process-related morphological deviations between the as-designed and actual laser powder bed fused stents were observed, resulting in a diameter increase by a factor of 2-2.6 for the stents without surface treatment and 1.3-2 for the electropolished stent compared to the as-designed stent. Thus, due to the increased geometrically induced stiffness, the laser powder bed fused stents in the as-built (7.11 ± 0.63 N) or the heat treated condition (5.87 ± 0.49 N) showed increased radial forces when compressed between two plates. After electropolishing, the heat treated stents exhibited radial forces (2.38 ± 0.23 N) comparable to conventional metallic stents. The laser powder bed fused stents were further affected by the size effect, resulting in a reduced yield strength by 41\% in the as-built and by 59\% in the heat treated condition compared to the bulk material obtained from tensile tests. The presented numerical approach was successful in predicting the macroscopic mechanical response of the stents under compression. During deformation, increased stiffness and local stress concentration were observed within the laser powder bed fused stents. Subsequent numerical expansion analysis of the derived stent models within a previously verified numerical model of stent expansion showed that electropolished and heat treated laser powder bed fused stents can exhibit comparable expansion behavior to conventional stents. The findings from this work motivate future experimental/numerical studies to quantify threshold values of critical geometric irregularities, which could be used to establish design guidelines for laser powder bed fused stents/lattice structures.}, subject = {Koronarendoprothese}, language = {en} } @article{TauwaldErzingerQuadrioetal., author = {Tauwald, Sandra Melina and Erzinger, Florian and Quadrio, Maurizio and R{\"u}tten, Markus and Stemmer, Christian and Krenkel, Lars}, title = {Tomo-PIV in a patient-specific model of human nasal cavities: a methodological approach}, series = {Measurement Science and Technology}, volume = {35}, journal = {Measurement Science and Technology}, number = {5}, publisher = {IOP Publishing}, doi = {10.1088/1361-6501/ad282c}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-70393}, abstract = {The human nose serves as the primary gateway for air entering the respiratory system and plays a vital role in breathing. Nasal breathing difficulties are a significant health concern, leading to substantial healthcare costs for patients. Understanding nasal airflow dynamics is crucial for comprehending respiratory mechanisms. This article presents a detailed study using tomo-Particle Image Velocimetry (PIV) to investigate nasal airflow dynamics while addressing its accuracy. Embedded in the OpenNose project, the work described aims to provide a validation basis for different numerical approaches to upper airway flow. The study includes the manufacturing of a transparent silicone model based on a clinical CT scan, refractive index matching to minimize optical distortions, and precise flow rate adjustments based on physiological breathing cycles. This method allows for spatial high-resolution investigations in different regions of interest within the nasopharynx during various phases of the breathing cycle. The results demonstrate the accuracy of the investigations, enabling detailed analysis of flow structures and gradients. This spatial high-resolution tomo-PIV approach provides valuable insights into the complex flow phenomena occurring during the physiological breathing cycle in the nasopharynx. The study's findings contribute to advancements in non-free-of-sight experimental flow investigation of complex cavities under nearly realistic conditions. Furthermore, reliable and accurate experimental data is crucial for properly validating numerical approaches that compute this patient-specific flow for clinical purposes.}, language = {en} } @article{ThemaWeidlichHoerletal., author = {Thema, Martin and Weidlich, Tobias and H{\"o}rl, Manuel and Bellack, Annett and M{\"o}rs, Friedemann and Hackl, Florian and Kohlmayer, Matthias and Gleich, Jasmin and Stabenau, Carsten and Trabold, Thomas and Neubert, Michael and Ortloff, Felix and Brotsack, Raimund and Schmack, Doris and Huber, Harald and Hafenbradl, Doris and Karl, J{\"u}rgen and Sterner, Michael}, title = {Biological CO2-Methanation: An Approach to Standardization}, series = {Energies}, volume = {12}, journal = {Energies}, number = {9}, publisher = {MDPI}, doi = {10.3390/en12091670}, pages = {1 -- 32}, abstract = {Power-to-Methane as one part of Power-to-Gas has been recognized globally as one of the key elements for the transition towards a sustainable energy system. While plants that produce methane catalytically have been in operation for a long time, biological methanation has just reached industrial pilot scale and near-term commercial application. The growing importance of the biological method is reflected by an increasing number of scientific articles describing novel approaches to improve this technology. However, these studies are difficult to compare because they lack a coherent nomenclature. In this article, we present a comprehensive set of parameters allowing the characterization and comparison of various biological methanation processes. To identify relevant parameters needed for a proper description of this technology, we summarized existing literature and defined system boundaries for Power-to-Methane process steps. On this basis, we derive system parameters providing information on the methanation system, its performance, the biology and cost aspects. As a result, three different standards are provided as a blueprint matrix for use in academia and industry applicable to both, biological and catalytic methanation. Hence, this review attempts to set the standards for a comprehensive description of biological and chemical methanation processes.}, language = {en} } @article{WeiglFeldmeierBierletal., author = {Weigl, Stefan and Feldmeier, Florian and Bierl, Rudolf and Matysik, Frank-Michael}, title = {Photoacoustic detection of acetone in N2 and synthetic air using a high power UV LED}, series = {Sensors Actuators B Chemical}, volume = {316}, journal = {Sensors Actuators B Chemical}, number = {August}, publisher = {Elsevier}, doi = {10.1016/j.snb.2020.128109}, pages = {1 -- 11}, abstract = {The performance of a photoacoustic trace gas sensor for the detection of acetone in N2 and synthetic air is reported. The sensor system utilises an amplitude modulated UV LED. The light source has an emission maximum at 278 nm and a maximum CW output power of 300 mW according to the datasheet. Three different collimating and focusing approaches have been investigated to guide the highly divergent LED light into the acoustic resonator of the photoacoustic measurement cell. A 3D printed aluminium cell was designed to optimize light coupling by simultaneously minimizing the photoacoustic background signal generation. Hence, the diameter of the resonator was set to a comparable large diameter of 10 mm and the inner walls of the resonator were mirror polished. The additive manufacturing procedure allowed for integration of a spirally formed gas channel, enabling gas heating prior to detection. The sensor performance was investigated by measuring acetone in N2 and synthetic air at different concentrations. The UV LED current was set to 86 \% of the maximum value according to the datasheet of the light source in order to increase the lifetime and thermal stability. An Allan-Werle deviation analysis validates a stable sensor performance. The limit of detection (LoD) was determined at a 3σ noise level with a 10 s lock-in amplifier time constant by sampling data points over 20 s with a data acquisition rate of 5 Hz. LoDs of 80.8 ppbV and 19.6 ppbV were obtained for acetone in N2 and synthetic air, respectively.}, language = {en} } @article{WeiglWittmannRuecketal., author = {Weigl, Stefan and Wittmann, Elisabeth and R{\"u}ck, Thomas and Bierl, Rudolf and Matysik, Frank-Michael}, title = {Effects of ambient parameters and cross-sensitivities from O2, CO2 and H2O on the photoacoustic detection of acetone in the UV region}, series = {Sensors Actuators B Chemical}, journal = {Sensors Actuators B Chemical}, number = {328}, publisher = {Elsevier}, issn = {0925-4005}, doi = {10.1016/j.snb.2020.129001}, abstract = {We present a sensitive UV LED photoacoustic setup for the detection of gaseous acetone and discuss its applicability towards breath analysis. We investigated the performance of the sensor for low acetone concentrations down to 0.1 parts per million (ppmV). The influences of temperature, flow, pressure, optical power and LED duty cycle on the measured signal have been examined. To gain a better understanding of the different effects on the photoacoustic signal, correlation analysis was applied and feature importance was determined using a large measured dataset. Furthermore, the cross-sensitivities towards O2, CO2 and H2O have been studied extensively. Finally, the sensor's performance to detect acetone between 0.1-1 ppmV within gas mixtures simulating breath exhale conditions has been investigated, too. With a limit of detection (LoD) of 12.5 parts per billion (ppbV) (3σ) measured under typical breath exhale gas mixture conditions, the sensor demonstrated a high potential for the application of acetone detection in human breath analysis.}, language = {en} } @incollection{HaugVetter, author = {Haug, Sonja and Vetter, Miriam}, title = {{\"A}ltere Menschen im Wohnquartier Margaretenau in Regensburg - aktuelle Situation und zuk{\"u}nftiger Bedarf}, series = {Wohnen und Gesundheit im Alter}, booktitle = {Wohnen und Gesundheit im Alter}, editor = {Teti, Andrea}, publisher = {Springer VS}, address = {Wiesbaden}, isbn = {978-3-658-34385-9}, doi = {10.1007/978-3-658-34386-6_14}, pages = {215 -- 227}, abstract = {Der Beitrag zeigt Ergebnisse einer Begleitstudie zur Restaurierung und energetischen Modernisierung des historischen genossenschaftlichen Wohnquartiers Margaretenau in Regensburg im Projekt MAGGIE. Bei der Gestaltung von Wohnungen und Gelegenheiten f{\"u}r die soziale Einbettung im Quartier wird eine altersgerechte Perspektive eingenommen. Die Darstellung der schriftlichen standardisierten Haushaltsbefragung (n = 195) nimmt die Lebenssituation {\"a}lterer Menschen ab 65 Jahren in den Fokus. Dazu werden die Themenbereiche Haushaltsstruktur, altersgerechtes Wohnen und Gemeinschaftseinrichtungen pr{\"a}sentiert. Neben der aktuellen Wohnsituation wurden Pl{\"a}ne und W{\"u}nsche f{\"u}r das zuk{\"u}nftige Wohnen abgefragt. Im Alter schwindet die Bereitschaft f{\"u}r Ver{\"a}nderungen, was sich am Wunsch zum Altern in der bisherigen Wohnung und Verbleib im Wohnquartier zeigt. Das Interesse am barrierereduzierten Wohnen ist bei {\"a}lteren Haushalten geringer als bei j{\"u}ngeren. Es zeigt sich ein {\"u}berdurchschnittlich hohes Maß an lokalem Sozialkapital, wobei kein signifikanter Unterschied zwischen j{\"u}ngeren und {\"a}lteren Haushalten besteht.}, language = {de} } @inproceedings{CurrleHaug, author = {Currle, Edda and Haug, Sonja}, title = {Acceptance of Telepresence Robotics, Telecare and Teletherapy Among Stroke Patients, Relatives and Therapy Staff}, series = {dHealth 2024: proceedings of the 18th annual conference on Health Informatics meets Digital Health conference}, booktitle = {dHealth 2024: proceedings of the 18th annual conference on Health Informatics meets Digital Health conference}, publisher = {IOS Press}, isbn = {978-1-64368-517-5}, issn = {0926-9630}, doi = {10.3233/SHTI240005}, pages = {15 -- 21}, abstract = {Background: Stroke as a cause of disability in adulthood causes an increasing demand for therapy and care services, including telecare and teletherapy. Objectives: Aim of the study is to analyse the acceptance of telepresence robotics and digital therapy applications. Methods: Longitudinal study with a before and after survey of patients, relatives and care and therapy staff. Results: Acceptance of the technology analysed is high in all three groups. Although acceptance among patients declined in parts of the cases in the second survey after having used telerobotics, all in all approval ratings remained high. With regard to patients no significant correlation was found between the general technology acceptance and the acceptance of use of telerobotics. Conclusion: Accepted new telecare and teletherapies can be offered with the help of telepresence robotics. This requires knowledge of and experience with the technology.}, language = {en} } @article{HaugLochnerHuber, author = {Haug, Sonja and Lochner, Susanne and Huber, Dominik}, title = {Methodological Aspects of a Quantitative and Qualitative Survey of Asylum Seekers in Germany}, series = {mda - methods data analyses}, volume = {13}, journal = {mda - methods data analyses}, number = {2}, publisher = {GESIS - Leibniz-Institut f{\"u}r Sozialwissenschaften}, doi = {10.12758/mda.2019.02}, pages = {321 -- 340}, abstract = {This field report presents and discusses methodological issues and challenges encountered in a mixed-methods research project on asylum seekers in Bavaria, Germany. It documents the research design of, and field experiences in, a quantitative survey based on a quota sampling procedure and a qualitative study, both of which were conducted in collective accommodation for asylum seekers at selected locations in that federal state. Standardized PAPI multiple-topic questionnaires were completed by asylum seekers from Syria, Afghanistan, Eritrea, and Iraq (N = 779); most of the questionnaires were self-administered. In addition, 12 qualitative face-to-face biographical interviews were conducted in order to gain an in-depth understanding of attitudes and experiences of asylum seekers. This report focuses on the following aspects: the use of gatekeepers to facilitate participant recruitment; sampling procedures; the involvement of interpreters in the data collection process; response bias and response behaviors among asylum seekers; and the experiences gained from data collection in collective accommodation for asylum seekers.}, language = {en} } @article{SnarskiiKalitaShamoninChamonine, author = {Snarskii, Andrei A. and Kalita, Viktor M. and Shamonin (Chamonine), Mikhail}, title = {Renormalization of the critical exponent for the shear modulus of magnetoactive elastomers}, series = {Scientific Reports}, volume = {8}, journal = {Scientific Reports}, publisher = {Nature}, doi = {10.1038/s41598-018-22333-6}, pages = {1 -- 8}, abstract = {It is shown that the critical exponent for the effective shear modulus of a composite medium where a compliant polymer matrix is filled with ferromagnetic particles may significantly depend on the external magnetic field. The physical consequence of this dependence is the critical behavior of the relative magnetorheological effect.}, language = {en} } @article{Linner, author = {Linner, Thomas}, title = {Special issue ISARC 2021}, series = {Construction Robotics}, volume = {Vol. 6}, journal = {Construction Robotics}, number = {Issue 2}, editor = {Linner, Thomas}, publisher = {Springer Nature}, doi = {10.1007/s41693-022-00079-y}, pages = {58 -- 68}, abstract = {The research filed of construction robotics broadens increasingly in terms of complexity, approaches, technologies used, active stakeholders, and application areas. Worldwide labour and resource shortages, the need to increase circularity and resource efficiency, new materials and the increasing utilisation of digital construction tools in the planning and construction industry massively spur the uptake of robotic solutions for on-site construction. The initial boom of construction robots happened in the 1970s, driven by the Japanese construction industry. In the 1980s, a combination with parallel developments was supposed to achieve complete, integrated robotic on-site factories. From the mid-1980s onwards, the global interest in construction robots decreased gradually. Bulky and expensive systems, complex on-site navigation and logistics approaches, a narrow scope of tasks, inflexibility, incompatibility with on-site work organisation and professional qualification, low usability and insufficient inter-robot coordination capabilities revealed the immaturity of the systems. Only a few organisations predominantly situated in Asia such as Takenaka, Obayashi, Kajima Corporation, Nihon Bisho Co., Samsung, and Hitachi maintained development activities. However, since the mid-2010s, development activities are gaining traction again. On the application side, this is mainly driven by trends such as the need to upgrade the energy performance of buildings in Europe, a global necessity to remove asbestos from existing structures, and a demand for enormous quantities of high-rise buildings all over East Asia. On the system side, the renewed interest stems from major advances in physical-mechanical robot technology in other automation-driven industries such as the automotive industry. Robots became lighter, more flexible, their parts modular and interchangeable, more user friendly as well as significantly cheaper. On the digital side, the BIM-to-Robot pipeline was subject of intensive reserach and development. More and more methods and tools help to increase the usability of robots and facilitate the simulation and optimisation of robot-driven construction processes. In the last 4-5 years, the worldwide growing need and interest in construction robotics became highly evident. More than 200 robot systems are pushed by start-ups and spin-offs and their investors to the market. This is backed by an enormous number of activities and projects carried out in the academic area pushing to the boundaries of what is technologically possible. Major associations and their conferences increase significantly in popularity such as ISARC (International Association for Automation and Robotics in Construction), EC3 (European Council of Computing in Construction), and Robots in Architecture. Competency in digital construction, automation and robotics becomes a key for all stakeholders in the construction industry and many universities worldwide launch dedicated interdisciplinary programs. Powerful governments (China) and major funding programs such as Horizon Europe (Europe) massively request and fund the development of robotic solutions for construction such as drones, mobile robots, 3D-printing solutions, cable-driven robots, and exoskeletons. Regulators and standardisation organisation start to develop the first certification and standardisation schemes for construction robots and large software companies make attempts to allow to simulate and program robotic construction processes efficiently and robustly based on digital building and construction data. To showcase the diversity of cutting-edge research in the area, this special issue invited eight extended versions of selected papers from the ISARC 2021 conference. As such, this issue covers digital approaches to embed fabrication and robot information in BIM and IFC and program robots directly from digital building models. New robot systems spur novel robotic production processes, and machine learning enable novel logistics approaches for building components that may ultimately lead to robotic cranes and other robotic on-site logistics and handling solutions (including autonomous construction machines). In parallel, systematic evaluation and robot development methods are developed that allow to shed light on their performance in the construction process.}, language = {en} } @inproceedings{SuessMelznerDendorfer, author = {Suess, Franz and Melzner, Maximilian and Dendorfer, Sebastian}, title = {Towards ergonomics working - machine learning algorithms and musculoskeletal modeling}, series = {IOP Conference Series: Materials Science and Engineering}, volume = {1208}, booktitle = {IOP Conference Series: Materials Science and Engineering}, publisher = {IOP Publishing}, issn = {1757-899X}, doi = {10.1088/1757-899X/1208/1/012001}, abstract = {Ergonomic workplaces lead to fewer work-related musculoskeletal disorders and thus fewer sick days. There are various guidelines to help avoid harmful situations. However, these recommendations are often rather crude and often neglect the complex interaction of biomechanical loading and psychological stress. This study investigates whether machine learning algorithms can be used to predict mechanical and stress-related muscle activity for a standardized motion. For this purpose, experimental data were collected for trunk movement with and without additional psychological stress. Two different algorithms (XGBoost and TensorFlow) were used to model the experimental data. XGBoost in particular predicted the results very well. By combining it with musculoskeletal models, the method shown here can be used for workplace analysis but also for the development of real-time feedback systems in real workplace environments.}, language = {en} } @article{Linner, author = {Linner, Thomas}, title = {Special issue: Implementation-Oriented Construction Robotics}, series = {Construction Robotics}, volume = {7}, journal = {Construction Robotics}, publisher = {Springer Nature}, doi = {10.1007/s41693-023-00100-y}, pages = {1 -- 2}, language = {en} } @article{MikhaeilGadererDawoud, author = {Mikhaeil, Makram and Gaderer, Matthias and Dawoud, Belal}, title = {Experimental Investigation of the Adsorption and Desorption Kinetics on an Open-Structured Asymmetric Plate Heat Exchanger; Matching Between Small-Scale and Full-Scale Results}, series = {Frontiers in Energy Research}, volume = {10}, journal = {Frontiers in Energy Research}, publisher = {Frontiers}, doi = {10.3389/fenrg.2022.818486}, pages = {1 -- 15}, abstract = {This paper introduces the results of an experimental study on the adsorption and desorption kinetics of a commercially available, open-structured asymmetric plate heat exchanger adapted to act as an adsorber/desorber for the application in adsorption heat transformation processes. In addition, a volumetric large temperature jump (V-LTJ) kinetic setup was applied to measure the adsorption and desorption kinetics of a small-scale adsorbent sample prepared dedicatedly to be representative for the adsorbent domain inside the investigated adsorber plate heat exchanger (APHE). All kinetic results of the small-scale adsorbent sample and the APHE were fitted into exponential forms with a single characteristic time constant (τ) with a coefficient of determination (R2) better than 0.9531. A very good matching between the small-scale and full-scale adsorption kinetic measurements was obtained, with an average relative deviation of 12.3\% in the obtained τ-values. In addition, the kinetic data of the small-scale adsorbent sample were utilized for estimating the expected specific instantaneous and moving average powers of the evaporator/condenser heat exchanger. The average relative deviation (ARD) between the moving average specific evaporator powers obtained from the small-scale and the full-scale measurements amounts between 5.4 and 15.1\%.}, language = {en} } @article{MonkmanSindersbergerPremetal., author = {Monkman, Gareth J. and Sindersberger, Dirk and Prem, Nina and Diermeier, Andreas and Szecsey, Tamara}, title = {Dielectric behaviour of magnetic hybrid materials}, series = {Physical Sciences Reviews}, volume = {7}, journal = {Physical Sciences Reviews}, number = {10}, publisher = {de Gruyter}, doi = {10.1515/psr-2019-0121}, pages = {1169 -- 1185}, abstract = {The objectives of this work include the analysis of electrical and magnetic properties of magneto-elastic hybrid materials with the intention of developing new techniques for sensor and actuator applications. This includes the investigation of dielectric properties at both low and high frequencies. The behaviour of capacitors whose dielectrics comprise magnetic hybrid materials is well known. Such interfacial magnetocapacitance can be varied according to magnetic content, magnetic flux density and the relative permittivity of the polymer matrix together with other dielectric content. The basic function of trapping electrical charges in polymers (electrets) is also established technology. However, the combination of magnetoactive polymers and electrets has led to the first electromagnetic device capable of adhering to almost any material, whether magnetically susceptible or not. During the course of this research, in addition to dielectrics, electrically conductive polymers based on (PDMS) matrices were developed in order to vary the electrical properties of the material in a targeted manner. In order to ensure repeatable results, this demanded new fabrication techniques hitherto unavailable. The 3D printing of silicones is far from being a mature technology and much pioneering work was necessary before extending the usual 3 d.o.f. to include orientation about and diffusion of particles in these three axes, thus leading to the concept of 6D printing. In 6D printing, the application of a magnetic field can be used during the curing process to control the particulate distribution and thus the spatial filler particle density as desired. Most of the devices (sensors and actuators) produced by such methods contain levels of carbonyl iron powder (CIP) embedded magnetic filler of up to 70 wt\%. Contrary to this, a hitherto neglected research area, namely magnetoactive polymers (MAPs) having significantly lower magnetic particle concentrations (1 to 3 wt\% CIP) were also investigated. With filler concentrations lower than 3 wt\%, structures are formed which are completely absent at higher filler levels. CIP concentrations in the range of 1wt\% demonstrate the formation of toroidal structures. Further development of coherent rings with a compact order results as filler concentrations increase towards 2 wt\%. Above 3 wt\% the structure eventually disintegrates to the usual random order found in traditional MAP with higher CIP content. Structured samples containing 1\%-3 wt\% CIP were investigated with the aid of X-ray tomography where solitary ring structures can be observed and eventually the formation of capillary doubles. Over wavelengths ranging from 1 to 25 µm, spectroscopic analysis of thin film MAP samples containing 2 wt\% CIP revealed measurable magnetic-field-dependent changes in IR absorption at a wavenumber 2350 (λ = 4.255 µm). This was found to be due to the diamagnetic susceptibility of atmospheric carbon dioxide (CO2). Consequently, the first potential application for sparse matrix MAPs was found.}, language = {en} } @article{HillebrandWestner, author = {Hillebrand, Patrick and Westner, Markus}, title = {Success factors of long-term CIOs}, series = {Information Systems and e-Business Management}, volume = {20}, journal = {Information Systems and e-Business Management}, publisher = {Springer Nature}, doi = {10.1007/s10257-021-00546-z}, pages = {79 -- 122}, abstract = {Although the average tenure of CIOs has increased over the last years, the majority of CIOs have been in their positions for only three years or less. Nevertheless, some CIOs have been successful in their position for a long time. In this study, we use tenure as a proxy for success as a CIO. The goal of this paper is to examine factors that are critical to the success of long-term CIOs. For this purpose, we created and analyzed resumes of 384 CIOs. Out of these 384, we conducted 19 interviews with CIOs from top-tier companies and collected and analyzed both qualitative and quantitative data. In the process, we were able to identify nine factors that are critical for the success (CSF) of CIOs. These factors fall into three categories. Category "Personality" includes "Accepting and embracing change" (CSF \#1), "Being perseverant to pursue long-term goals" (CSF \#2), "Anticipating the future through visionary thinking" (CSF \#3), and "Being empathetic to deal with uncertainty felt by co-workers" (CSF \#4). The "Role Fulfilment" category includes "Cross-functional involvement and integration of the IT organization" (CSF \#5), "Positioning and restructuring of the IT organization" (CSF \#6), and "Well-connected and communicative leadership" (CSF \#7). The "Organizational Environment" category consists of "Availability of skilled workforce" (CSF \#8) and "Reporting line to the CEO" (CSF \#9). CSFs 1, 2, and 3 were perceived as most important by the participating CIOs. The results may be of particular interest both to aspiring CIOs and equally their employing organizations, as they reflect what long-term CIOs value during their time in office.}, language = {en} } @article{SchoenenwaldKernViehhauseretal., author = {Schoenenwald, Alexander and Kern, Simon and Viehhauser, Josef and Schildgen, Johannes}, title = {Collecting and visualizing data lineage of Spark jobs}, series = {Datenbank-Spektrum}, volume = {21}, journal = {Datenbank-Spektrum}, number = {3}, publisher = {Springer Nature}, doi = {10.1007/s13222-021-00387-7}, pages = {179 -- 189}, abstract = {Metadata management constitutes a key prerequisite for enterprises as they engage in data analytics and governance. Today, however, the context of data is often only manually documented by subject matter experts, and lacks completeness and reliability due to the complex nature of data pipelines. Thus, collecting data lineage—describing the origin, structure, and dependencies of data—in an automated fashion increases quality of provided metadata and reduces manual effort, making it critical for the development and operation of data pipelines. In our practice report, we propose an end-to-end solution that digests lineage via (Py‑)Spark execution plans. We build upon the open-source component Spline, allowing us to reliably consume lineage metadata and identify interdependencies. We map the digested data into an expandable data model, enabling us to extract graph structures for both coarse- and fine-grained data lineage. Lastly, our solution visualizes the extracted data lineage via a modern web app, and integrates with BMW Group's soon-to-be open-sourced Cloud Data Hub.}, language = {en} } @article{CurbachLanderDierksetal., author = {Curbach, Janina and Lander, Jonas and Dierks, Marie-Luise and Grepmeier, Eva-Maria and von Sommoggy, Julia}, title = {How do health professionals translate evidence on early childhood allergy prevention into health literacy-responsive practice?}, series = {BMJ OPEN}, volume = {11}, journal = {BMJ OPEN}, publisher = {BMJ}, doi = {10.1136/bmjopen-2020-047733}, pages = {1 -- 8}, abstract = {Introduction Paediatricians, general practitioners (GPs) and midwives in primary care are important sources of information for parents on early childhood allergy prevention (ECAP). Research has shown that preventive counselling by health professionals can be effective in improving patients' health literacy (HL) and health behaviour. Providing effective advice relies on two factors. First, health professionals need be up-to-date with research evidence on ECAP, to consider popular misconceptions and fears and to translate this knowledge into clear recommendations for parents (knowledge translation). Second, they need to know and apply counselling techniques and create a practice setting which accommodates parental HL needs (health literacy-responsive care). The objective of this study is to explore and assess how German health professionals take up and translate ECAP evidence into appropriate recommendations for parents, how they consider HL in counselling and practice organisation and what barriers and enablers they find in their performance of HL-responsive ECAP. Methods and analysis The study has a sequential mixed-method design, in two phases. In the first phase, qualitative semi-structured expert interviews will be conducted with health professionals (paediatricians, GPs and midwives) at primary care level and professional policy level. Data collection is ongoing until January 2022. In the second phase, based on the qualitative results, a standardised questionnaire will be developed, and pilot-tested in a wider population of German health professionals. The findings of both phases will be integrated. Ethics and dissemination The study has received ethical approval from the Ethics Committee of the University of Regensburg (18-1205-101). The results will be published in international peer-reviewed open access journals and via presentations at scientific conferences. The results will also be shared with German health professionals, decision-makers and potential funders of interventions.}, language = {en} } @article{BerndtMuggliHeckeletal., author = {Berndt, Dominik and Muggli, Josef and Heckel, Robert and Rahiman, Mohd Fuad and Lindner, Matthias and Heinrich, Stephan and Pl{\"o}chinger, Heinz and Schreiner, Rupert}, title = {A Robust Miniaturized Gas Sensor for H₂ and CO₂ Detection Based on the 3ω Method}, series = {Sensors}, volume = {22}, journal = {Sensors}, number = {2}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/s22020485}, pages = {1 -- 17}, abstract = {Gas concentration monitoring is essential in industrial or life science areas in order to address safety-relevant or process-related questions. Many of the sensors used in this context are based on the principle of thermal conductivity. The 3ω-method is a very accurate method to determine the thermal properties of materials. It has its origin in the thermal characterization of thin solid films. To date, there have been very few scientific investigations using this method to determine the thermal properties of gases and to apply it to gas measurement technology. In this article, we use two exemplary gases (H2 and CO2) for a systematical investigation of this method in the context of gas analysis. To perform our experiments, we use a robust, reliable sensing element that is already well established in vacuum measurement technology. This helix-shaped thin wire of tungsten exhibits high robustness against chemical and mechanical influences. Our setup features a compact measurement environment, where sensor operation and data acquisition are integrated into a single device. The experimental results show a good agreement with a simplified analytical model and FEM simulations. The sensor exhibits a lower detection limit of 0.62\% in the case of CO2, and only 0.062\% in case the of H2 at an excitation frequency of 1 Hz. This is one of the lowest values reported in literature for thermal conductivity H2 sensors.}, language = {en} } @article{SteiningerGadererSteffensetal., author = {Steininger, Peter and Gaderer, Matthias and Steffens, Oliver and Dawoud, Belal}, title = {Experimental and Numerical Study on the Heat Transfer Characteristics of a Newly-Developed Solar Active Thermal Insulation System}, series = {Buildings}, volume = {11}, journal = {Buildings}, number = {3}, publisher = {MDPI}, doi = {10.3390/buildings11030123}, pages = {1 -- 22}, abstract = {A newly-developed solar active thermal insulation system (SATIS) is introduced with the main objective to accomplish a highly-dependent total solar transmittance on the irradiation angle. SATIS is also designed to obtain the maximum transmittance at a prescribed design irradiation angle and to reduce it remarkably at higher irradiation angles. A purely mineral thermal insulation plaster with micro hollow glass spheres is applied to manufacture the investigated SATIS prototype. Light-conducting elements (LCEs) have been introduced into SATIS and suitable closing elements have been applied. The SATIS prototype has been investigated both experimentally and numerically. It turned out that the contributions of conduction, radiation and convection to the effective thermal conductivity of SATIS, without the closing elements (49 mWmK), amount to 86.2\%, 13.2\% and 0.6\%, respectively. The angle-dependent short-wave radiation exchange within the LCE has been investigated via ray tracing. At the incidence angle of 19\% (design angle), 27\% of the radiation within the LCE is absorbed by the absorber plate, resulting in measured and computed total solar energy transmittances of 11.2\%/11.7\%, respectively. For a typical summer irradiation angle of 60\%, 98\% of the incident radiation is absorbed by the surfaces at the entrance of the LCE. The corresponding total solar energy transmittance amounts to 2.9\%.}, language = {en} } @article{GamischGadererDawoud, author = {Gamisch, Bernd and Gaderer, Matthias and Dawoud, Belal}, title = {On the Development of Thermochemical Hydrogen Storage: An Experimental Study of the Kinetics of the Redox Reactions under Different Operating Conditions}, series = {Applied Sciences}, volume = {11}, journal = {Applied Sciences}, number = {4}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app11041623}, pages = {1 -- 15}, abstract = {This work aims at investigating the reduction/oxidation (redox) reaction kinetics on iron oxide pellets under different operating conditions of thermochemical hydrogen storage. In order to reduce the iron oxide pellets (90\% Fe2O3, 10\% stabilizing cement), hydrogen (H2) is applied in different concentrations with nitrogen (N2), as a carrier gas, at temperatures between between 700 ∘C and 900 ∘C, thus simulating the charging phase. The discharge phase is triggered by the flow of a mixture out of steam (H2O) and N2 at different concentrations in the same temperature range, resulting in the oxidizing of the previously reduced pellets. All investigations were carried out in a thermo-gravimetric analyzer (TGA) with a flow rate of 250mL/min. To describe the obtained kinetic results, a simplified analytical model, based on the linear driving force model, was developed. The investigated iron oxide pellets showed a stable redox performance of 23.8\% weight reduction/gain, which corresponds to a volumetric storage density of 2.8kWh/(L bulk), also after the 29 performed redox cycles. Recalling that there is no H2 stored during the storage phase but iron, the introduced hydrogen storage technology is deemed very promising for applications in urban areas as day-night or seasonal storage for green hydrogen.}, language = {en} } @article{PremSindersbergerMonkman, author = {Prem, Nina and Sindersberger, Dirk and Monkman, Gareth J.}, title = {Mini-Extruder for 3D Magnetoactive Polymer Printing}, series = {Advances in Materials Science and Engineering}, journal = {Advances in Materials Science and Engineering}, publisher = {HINDAWI}, doi = {10.1155/2019/8715718}, pages = {1 -- 8}, abstract = {This work describes the development of a new miniature extruder, essential to cavity-free 3D printing of silicone-based smart materials. This makes the 3D printing of magnetoactive and electroactive polymer soft robotic components and devices directly from CAD data possible. The special feature of such an extruder is that it is designed for use with addition-crosslinking RTV-2 silicones, including solid particulate additives. The extruder merges the respective components automatically during extrusion which obviates the need for premixing and vacuum evacuation. Problems associated with inhomogeneities and unwanted cavity production are consequently eliminated. Rheological details necessary to the design, together with some preliminary performance results, are presented.}, language = {en} } @article{Stein, author = {Stein, Oliver}, title = {On analytic properties of the standard zeta function attached to a vector-valued modular form}, series = {Research in Number Theory}, volume = {8}, journal = {Research in Number Theory}, number = {4}, publisher = {Springer Nature}, doi = {10.1007/s40993-022-00368-z}, pages = {1 -- 27}, abstract = {We proof a Garrett-B{\"o}cherer decomposition of a vector-valued Siegel Eisenstein series E2l,0 of genus 2 transforming with the Weil representation of Sp2(Z) on the group ring C[(L′/L)2]. We show that the standard zeta function associated to a vector-valued common eigenform f for the Weil representation can be meromorphically continued to the whole s-plane and that it satisfies a functional equation. The proof is based on an integral representation of this zeta function in terms of f and E2l,0.}, language = {en} } @article{DechantFedulovFetisovetal., author = {Dechant, Eduard and Fedulov, Feodor and Fetisov, Leonid Y. and Shamonin (Chamonine), Mikhail}, title = {Bandwidth Widening of Piezoelectric Cantilever Beam Arrays by Mass-Tip Tuning for Low-Frequency Vibration Energy Harvesting}, series = {Applied Science}, volume = {7}, journal = {Applied Science}, number = {12}, publisher = {MDPI}, organization = {MDPI AG}, doi = {10.3390/app7121324}, abstract = {Wireless sensor networks usually rely on internal permanent or rechargeable batteries as a power supply, causing high maintenance efforts. An alternative solution is to supply the entire system by harvesting the ambient energy, for example, by transducing ambient vibrations into electric energy by virtue of the piezoelectric effect. The purpose of this paper is to present a simple engineering approach for the bandwidth optimization of vibration energy harvesting systems comprising multiple piezoelectric cantilevers (PECs). The frequency tuning of a particular cantilever is achieved by changing the tip mass. It is shown that the bandwidth enhancement by mass tuning is limited and requires several PECs with close resonance frequencies. At a fixed frequency detuning between subsequent PECs, the achievable bandwidth shows a saturation behavior as a function of the number of cantilevers used. Since the resonance frequency of each PEC is different, the output voltages at a particular excitation frequency have different amplitudes and phases. A simple power-transfer circuit where several PECs with an individual full wave bridge rectifier are connected in parallel allows one to extract the electrical power close to the theoretical maximum excluding the diode losses. The experiments performed on two- and three-PEC arrays show reasonable agreement with simulations and demonstrate that this power-transfer circuit additionally influences the frequency dependence of the harvested electrical power.}, language = {en} } @article{FrikelHaltmeier, author = {Frikel, J{\"u}rgen and Haltmeier, Markus}, title = {Efficient regularization with wavelet sparsity constraints in photoacoustic tomography}, series = {Inverse Problems}, volume = {34}, journal = {Inverse Problems}, number = {2}, doi = {10.1088/1361-6420/aaa0ac}, pages = {1 -- 28}, abstract = {In this paper, we consider the reconstruction problem of photoacoustic tomography (PAT) with a flat observation surface. We develop a direct reconstruction method that employs regularization with wavelet sparsity constraints. To that end, we derive a wavelet-vaguelette decomposition (WVD) for the PAT forward operator and a corresponding explicit reconstruction formula in the case of exact data. In the case of noisy data, we combine the WVD reconstruction formula with soft-thresholding, which yields a spatially adaptive estimation method. We demonstrate that our method is statistically optimal for white random noise if the unknown function is assumed to lie in any Besov-ball. We present generalizations of this approach and, in particular, we discuss the combination of PAT-vaguelette soft-thresholding with a total variation (TV) prior. We also provide an efficient implementation of the PAT-vaguelette transform that leads to fast image reconstruction algorithms supported by numerical results.}, language = {en} } @article{Diamantidis, author = {Diamantidis, Dimitris}, title = {A Critical View on Environmental and Human Risk Acceptance Criteria}, series = {International Journal of Environmental Science and Development}, volume = {8}, journal = {International Journal of Environmental Science and Development}, number = {1}, doi = {10.18178/ijesd.2017.8.1.921}, pages = {62 -- 66}, abstract = {Natural and technological hazards have a major impact on environmental and human safety. Risk assessment plays an essential role in the risk management of the effects of such hazards. This contribution summarizes first the general formulation of risk depending on two parameters: hazard probability and associated consequences. Problems faced in industrial applications based on the experience of the author are discussed. Risk acceptance criteria for the contributors to risk i.e. human, economic and environment are critically reviewed. Resilience based criteria are also included and conclusions for future developments are provided.}, language = {en} } @article{FranzWolfPeriyasamyetal., author = {Franz, Maja and Wolf, Lucas and Periyasamy, Maniraman and Ufrecht, Christian and Scherer, Daniel D. and Plinge, Axel and Mutschler, Christopher and Mauerer, Wolfgang}, title = {Uncovering Instabilities in Variational-Quantum Deep Q-Networks}, series = {Journal of the Franklin Institute}, journal = {Journal of the Franklin Institute}, edition = {In Press, Corrected Proof}, publisher = {Elsevier}, issn = {0016-0032}, doi = {10.1016/j.jfranklin.2022.08.021}, abstract = {Deep Reinforcement Learning (RL) has considerably advanced over the past decade. At the same time, state-of-the-art RL algorithms require a large computational budget in terms of training time to converge. Recent work has started to approach this problem through the lens of quantum computing, which promises theoretical speed-ups for several traditionally hard tasks. In this work, we examine a class of hybrid quantumclassical RL algorithms that we collectively refer to as variational quantum deep Q-networks (VQ-DQN). We show that VQ-DQN approaches are subject to instabilities that cause the learned policy to diverge, study the extent to which this afflicts reproduciblity of established results based on classical simulation, and perform systematic experiments to identify potential explanations for the observed instabilities. Additionally, and in contrast to most existing work on quantum reinforcement learning, we execute RL algorithms on an actual quantum processing unit (an IBM Quantum Device) and investigate differences in behaviour between simulated and physical quantum systems that suffer from implementation deficiencies. Our experiments show that, contrary to opposite claims in the literature, it cannot be conclusively decided if known quantum approaches, even if simulated without physical imperfections, can provide an advantage as compared to classical approaches. Finally, we provide a robust, universal and well-tested implementation of VQ-DQN as a reproducible testbed for future experiments.}, language = {en} } @article{SchloplocherEttengruberSteffens, author = {Schloplocher, Paul Dragos and Ettengruber, Stefan and Steffens, Oliver}, title = {Improvements for building-performance simulations by a comparative finite-element method analysis}, series = {Energy and Buildings}, volume = {278}, journal = {Energy and Buildings}, publisher = {Elsevier}, doi = {10.1016/j.enbuild.2022.112563}, pages = {1 -- 12}, abstract = {This paper presents a method to improve building-performance simulations (BPS) by the comparison and analysis of different approaches based on finite-element method (FEM) models. The lumped parameter method (LPM) is used in several BPS programs and tools. It has the advantage of fast computing times and comparably good accuracy for thermal and energy loads. With the help of detailed FEM simulations, it is possible to further improve the degree of detail and accuracy while maintaining the high simulation speed. In this work, we compare time-dependent results for local temperatures in a generic reference room within a given periode of time. In a second step, the differences between the models with respect to various physical effects are analyzed and used to introduce additional equations into the LPM model in order to improve its accuracy. Thus, we discuss potentials for improvement for BPS and demonstrate a method of a practical implementation. The results show minor differences of less than 0.1 K for radiation and heat transfer, so their level of detail in BPS is appropriate. In these terms, no improvements were pursued within the work. However, the FEM simulation is capable of calculating the internal convective heat transfer and thermal bridges more accurately due to the use of computational fluid dynamics (CFD) and the geometrically precise representation of the FEM model. Here, deviations of up to 1 K in room temperature (convective heat transfer) and up to 0.5 K in wall temperatures (thermal bridges) were pointed out. By improving the LPM with equations obtained from the FEM, these deviations can be reduced to less than 0.2 K, which is a considerable improvement in accuracy.}, language = {en} } @article{MaiwaldRoiderSchmidtetal., author = {Maiwald, Frederik and Roider, Clemens and Schmidt, Michael and Hierl, Stefan}, title = {Optical Coherence Tomography for 3D Weld Seam Localization in Absorber-Free Laser Transmission Welding}, series = {Applied Sciences}, volume = {12}, journal = {Applied Sciences}, number = {5}, publisher = {MPDI}, address = {Basel}, doi = {10.3390/app12052718}, pages = {1 -- 11}, abstract = {Quality and reliability are of the utmost importance for manufacturing in the optical and medical industries. Absorber-free laser transmission welding enables the precise joining of identical polymers without additives or adhesives and is well-suited to meet the demands of the aforementioned industries. To attain sufficient absorption of laser energy without absorbent additives, thulium fiber lasers, which emit in the polymers' intrinsic absorption spectrum, are used. Focusing the laser beam with a high numerical aperture provides significant intensity gradients inside the workpiece and enables selective fusing of the internal joining zone without affecting the surface of the device. Because seam size and position are crucial, the high-quality requirements demand internal weld seam monitoring. In this work, we propose a novel method to determine weld seam location and size using optical coherence tomography. Changes in optical material properties because of melting and re-solidification during welding allow for weld seam differentiation from the injection-molded base material. Automatic processing of the optical coherence tomography data enables the identification and measurement of the weld seam geometry. The results from our technique are consistent with microscopic images of microtome sections and demonstrate that weld seam localization in polyamide 6 is possible with an accuracy better than a tenth of a millimeter.}, language = {en} } @article{KreitmeierChashinFetisovetal., author = {Kreitmeier, Florian and Chashin, Dmitri V. and Fetisov, Yuri K. and Fetisov, Leonid Y. and Schulz, Irene and Monkman, Gareth J. and Shamonin (Chamonine), Mikhail}, title = {Nonlinear Magnetoelectric Response of Planar Ferromagnetic-Piezoelectric Structures to Sub-Millisecond Magnetic Pulses}, series = {Sensors}, volume = {12}, journal = {Sensors}, number = {11}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/s121114821}, pages = {14821 -- 14837}, abstract = {The magnetoelectric response of bi- and symmetric trilayer composite structures to pulsed magnetic fields is experimentally investigated in detail. The structures comprise layers of commercially available piezoelectric (lead zirconate titanate) and magnetostrictive (permendur or nickel) materials. The magnetic-field pulses have the form of a half-wave sine function with duration of 450 µs and amplitudes ranging from 500 Oe to 38 kOe. The time dependence of the resulting voltage is presented and explained by theoretical estimations. Appearance of voltage oscillations with frequencies much larger than the reciprocal pulse length is observed for sufficiently large amplitudes (~1-10 kOe) of the magnetic-field pulse. The origin of these oscillations is the excitation of bending and planar acoustic oscillations in the structures. Dependencies of the magnetoelectric voltage coefficient on the excitation frequency and the applied magnetic field are calculated by digital signal processing and compared with those obtained by the method of harmonic field modulation. The results are of interest for developing magnetoelectric sensors of pulsed magnetic fields as well as for rapid characterization of magnetoelectric composite structures.}, language = {en} } @article{ApelsmeierGleixnerMayeretal., author = {Apelsmeier, Andreas and Gleixner, Ramona and Mayer, Matthias and Shamonin (Chamonine), Mikhail and Schmauss, Bernhard}, title = {Intensity referencing in an extrinsic optical fiber temperature sensor}, series = {Procedia Engineering}, volume = {5}, journal = {Procedia Engineering}, publisher = {Elsevier}, doi = {10.1016/j.proeng.2010.09.301}, pages = {1095 -- 1098}, abstract = {Optical fiber sensors based on intensity measurement require some form of intensity referencing to avoid errors arising from parasitic losses. Known techniques of referencing such as balanced bridge, divided beam systems or two-wavelength referencing are not suitable for low-cost applications since they use relatively complicated optical components such as multiple LED sources, couplers, filters etc. In this work a novel method of referencing in an extrinsic optical fiber sensor system utilizing temperature dependence of absorption edge in a semiconductor crystal is described. The sensor system comprises a single LED source and no optical fiber junctions. The emission spectrum of an LED depends on its temperature. The reference is provided by controlling the temperature of an LED source and transmission measurements with different emission spectra. The entire process is controlled by a microprocessor unit. Performance of a sensor system is investigated and it is shown that the losses in connectors may be compensated for.}, language = {en} } @article{MonkmanSindersbergerPremetal., author = {Monkman, Gareth J. and Sindersberger, Dirk and Prem, Nina and Szecsey, Tamara}, title = {Smart Stiction}, series = {Robotics \& Automation Engineering Journal}, volume = {4}, journal = {Robotics \& Automation Engineering Journal}, number = {4}, publisher = {Juniper Publishers}, doi = {10.19080/RAEJ.2019.04.555641}, abstract = {Soft robotics could loosely be described as the engineering science of expanded dexterity through controllable flexibility. The exploitation of controllable compliance through the judicious choice of soft flexible members, as opposed to a finite number of rigid kinematic joints, can result in greater dexterity without compromising simplicity. One example is the replacement of segmented mechanical legs with simple compliant material eruciform prolegs. To achieve this in robotics, without introducing additional mechanical joints, mobile surfaces with switchable coefficients of friction is essential. This paper explains how, using silicone based smart materials, the rapid alternation between kinematic and static friction (stiction) may be achieved.}, language = {en} } @article{Herrmann, author = {Herrmann, Frank}, title = {Human Experience Versus Rule Decision at Krones AG}, series = {Biomedical Journal of Scientific \& Technical Research}, volume = {42}, journal = {Biomedical Journal of Scientific \& Technical Research}, number = {1}, publisher = {Biomedical Research Network+}, issn = {2574 -1241}, doi = {10.26717/BJSTR.2022.42.006691}, pages = {33255 -- 33260}, abstract = {Final assembly at Krones AG must make the best possible use of its production space and meeting the specified customer due dates is critical. Via a self developed simulation tool, the present scheduling procedure is compared with the one by priority rule shortest slack. As a consequence slack should have a higher importance in the planning}, language = {en} } @article{GoeppelFrikelHaltmeier, author = {G{\"o}ppel, Simon and Frikel, J{\"u}rgen and Haltmeier, Markus}, title = {Data-Proximal Complementary ℓ1-TV Reconstruction for Limited Data Computed Tomography}, series = {Mathematics}, volume = {12}, journal = {Mathematics}, number = {10}, publisher = {MDPI}, issn = {2227-7390}, doi = {10.3390/math12101606}, abstract = {In a number of tomographic applications, data cannot be fully acquired, resulting in severely underdetermined image reconstruction. Conventional methods in such cases lead to reconstructions with significant artifacts. To overcome these artifacts, regularization methods are applied that incorporate additional information. An important example is TV reconstruction, which is known to be efficient in compensating for missing data and reducing reconstruction artifacts. On the other hand, tomographic data are also contaminated by noise, which poses an additional challenge. The use of a single regularizer must therefore account for both the missing data and the noise. A particular regularizer may not be ideal for both tasks. For example, the TV regularizer is a poor choice for noise reduction over multiple scales, in which case ℓ1 curvelet regularization methods are well suited. To address this issue, in this paper, we present a novel variational regularization framework that combines the advantages of different regularizers. The basic idea of our framework is to perform reconstruction in two stages. The first stage is mainly aimed at accurate reconstruction in the presence of noise, and the second stage is aimed at artifact reduction. Both reconstruction stages are connected by a data proximity condition. The proposed method is implemented and tested for limited-view CT using a combined curvelet-TV approach. We define and implement a curvelet transform adapted to the limited-view problem and illustrate the advantages of our approach in numerical experiments.}, language = {en} } @article{MikhaeilGadererDawoud, author = {Mikhaeil, Makram and Gaderer, Matthias and Dawoud, Belal}, title = {On the development of an innovative adsorber plate heat exchanger for adsorption heat transformation processes; an experimental and numerical study}, series = {Energy}, volume = {207}, journal = {Energy}, number = {September}, publisher = {Elsevier}, doi = {10.1016/j.energy.2020.118272}, pages = {1 -- 13}, abstract = {An innovative adsorber plate heat exchanger (APHE), which is developed for application in adsorption heat pumps, chillers and thermal energy storage systems, is introduced. A test frame has been constructed as a representative segment of the introduced APHE for applying loose grains of AQSOA-Z02. Adsorption kinetic measurements have been carried out in a volumetric large-temperature-jump setup under typical operating conditions of adsorption processes. A transient 2-D model is developed for the tested sample inside the setup. The measured temporal uptake variations with time have been fed to the model, through which a micro-pore diffusion coefficient at infinite temperature of 2 E-4 [m2s-1] and an activation energy of 42.1 [kJ mol-1] have been estimated. A 3-D model is developed to simulate the combined heat and mass transfer inside the APHE and implemented in a commercial software. Comparing the obtained results with the literature values for an extruded aluminium adsorber heat exchanger coated with a 500 μm layer of the same adsorbent, the differential water uptake obtained after 300 s of adsorption (8.2 g/100 g) implies a sound enhancement of 310\%. This result proves the great potential of the introduced APHE to remarkably enhance the performance of adsorption heat transformation appliances.}, language = {en} } @article{HuberHeindlSchlosseretal., author = {Huber, Lea and Heindl, Melanie and Schlosser, Marc and Pfitzner, Arno and Dawoud, Belal}, title = {On the Cycle Stability and Macroscopic Structure of Iron Oxide Pellets for Thermochemical Hydrogen Storage: Influence of Water Content during the Pelletizing Process}, series = {Applied Sciences}, volume = {13}, journal = {Applied Sciences}, number = {11}, publisher = {MDPI}, address = {16}, doi = {10.3390/app13116408}, abstract = {Hydrogen storage based on the repeated reduction and oxidation (redox) reactions of iron oxide/iron composites represents a promising technology. This work is dedicated to studying the influence of the amount of water added during the pelletizing process on the cycle stability and structure of iron oxide pellets. The storage composites were prepared from iron oxide (Fe2O3) and 10 wt.-\% support material (cement) with different amounts of water (18 and 33 wt.-\%) in a laboratory-scale pelletizing disk. To evaluate the cycle stability of the composites, the kinetics of the redox reactions were experimentally measured at 800 ∘ C in an atmosphere of 50\% N2 and 50\% H2 (reduction) or 50\% steam (oxidation), respectively. Moreover, the structure of the pellets was analyzed by micro-computed tomography scans. It turned out that pellets with higher water contents attained faster kinetics and a higher cycle stability. The sample with the least water content (18 wt.-\%) needed about 26 min and 19 min to reach a conversion rate of 80\% during the reduction and oxidation reactions of the sixth redox cycle, respectively. In contrast, the sample with the highest water content (33 wt.-\%) could achieve the same conversion rate after 18 min (reduction) and 13 min (oxidation) during the ninth redox cycle.}, language = {en} } @article{Schiek, author = {Schiek, Roland}, title = {Nonlinear refractive index in silica glass}, series = {Optical Materials Expres}, volume = {13}, journal = {Optical Materials Expres}, number = {6}, publisher = {Optica}, doi = {10.1364/ome.489520}, pages = {1727 -- 1740}, abstract = {The third-order nonlinear susceptibility of silica glass is measured via self-phase modulation in standard single mode fibers at a wavelength of 1550 nm. To minimize the influence of polarization state changes along the propagation only meter-long fibers were investigated. With pulse durations of picoseconds a quasi-instantaneous nonlinearity with ultrafast electronic and fast nuclear-vibration contributions produces under conditions of negligible dispersion a classic and clean nonlinear phase shift following exactly the shape of the pulse power. The complex pulse envelope was retrieved from frequency optical gating spectrograms. The nonlinear fiber parameter γ could be determined with an accuracy of 3.7 percent. Considering the mode field structure and the doping influence the nonlinear refractive index of silica glass as the fiber base material was found to be n 2 =2.22⋅10 -16 cm 2 W±6.0\% for picosecond-long pulses. Comparing nonlinear phase shifts from linear and circular polarized light a nuclear-vibration contribution to the cubic fiber nonlinearity of 25 percent was estimated.}, language = {en} } @article{RomanoEhrlich, author = {Romano, Marco and Ehrlich, Ingo}, title = {Classification of damping properties of fabric-reinforced flat beam-like specimens by a degree of ondulation implying a mesomechanic kinematic}, series = {Science and Engineering of Composite Materials}, volume = {31}, journal = {Science and Engineering of Composite Materials}, number = {1}, publisher = {Walter de Gruyter GmbH}, issn = {2191-0359}, doi = {10.1515/secm-2024-0019}, abstract = {In order to determine the influence of the ondulations in fabrics on the damping properties of fiber-reinforced plastics, the structural dynamic properties of fabric- and unidirectionally reinforced plastics are investigated. The free decay behavior of flat beam-like specimens is investigated under fixed-free boundary conditions. As the material damping is consistently higher in fabric-reinforced specimens compared to unidirectionally reinforced ones, a contribution of an additionally acting mesomechanic kinematic in fabric weaves is implied. Based on a degree of ondulation, it is possible to classify the enhancement of the material damping and determine the corresponding energy dissipation. The study provides valuable quantitative relations of the additional damping effect due to the mesomechanic kinematic. Compared to the unidirectionally reinforced material, plain weave enhances the material damping by 37…52\% at ˜OPL=0.0133 , whereas twill weave 2/2 enhances it by 31…40\% at ˜OT2=0.0098 . The consideration of the findings contributes to a deeper understanding of the visco-elastic dynamic behavior of fabric-reinforced plastics and allows further applications in research, development, and industry.}, language = {en} } @article{SteiningerGadererDawoud, author = {Steininger, Peter and Gaderer, Matthias and Dawoud, Belal}, title = {Assessment of the Annual Transmission Heat Loss Reduction of a Refurbished Existing Building with an Advanced Solar Selective Thermal Insulation System}, series = {Sustainability}, volume = {13}, journal = {Sustainability}, number = {13}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/su13137336}, pages = {1 -- 19}, abstract = {A numerical parameter sensitivity analysis of the design parameters of the recently published solar selective thermal insulation system (SATIS) has been carried out to enhance its thermal and optical properties. It turned out that the insulation properties of SATIS can be effectively improved by reducing the length of the glass closure element. Increasing the area share of the light conducting elements (LCEs) and decreasing their length-to-diameter (L/D) ratio were identified as key parameters in order to increase the solar gain. Two SATIS variants were compared with the same wall insulation without SATIS in a yearly energetic performance assessment. The SATIS variant with 10 mm length of the closure element, 44.2\% area share of LCE, as well as front and rear diameters of 12 mm/9 mm shows an 11.8\% lower transmission heat loss over the heating period than the wall insulation without SATIS. A new methodology was developed to enable the implementation of the computed solar gains of SATIS in 1D simulation tools. The result is a radiant heat flow map for integration as a heat source in 1D simulation models. A comparison between the 1D and 3D models of the inside wall heat fluxes showed an integral yearly agreement of 98\%.}, language = {en} }