@unpublished{HeberlWithelmKauletal., author = {Heberl, Michael and Withelm, Christian and Kaul, Anja and Rank, Daniel and Sterner, Michael}, title = {Prospective Life Cycle Assessment of Biological Methanation in a Trickle-Bed Pilot Plant and a Potential Scale-Up}, publisher = {SSRN}, doi = {10.2139/ssrn.4635066}, abstract = {In this study, a pilot-scale trickle-bed reactor for biological methanation and various scale-up scenarios for 2023 and 2050 were investigated using LCA. A best- and worst-case scenario for technology development until 2050 was evolved using cross consistency analysis and morphological field, based on which the data for the ecological models were determined.The results show that the plant scale-up has a very positive effect on the ecological consequences of methanation. In the best-case scenario, the values are a factor of 23-780 lower than those of the actual plant today. A hot-spot analysis showed that especially electrolysis operation has a large impact on total emissions. The final Monte-Carlo simulation shows that the technology is likely to achieve a low GWP with a median of 104.0 kg CO2-eq / MWh CH4.}, language = {en} } @techreport{SoergelLudererEmelianovaetal., author = {S{\"o}rgel, Dominika and Luderer, Gunnar and Emelianova, Polina and Koch, Otto and Timpe, Christof and Bauer, Franz and Sterner, Michael}, title = {Kopernikus-Szenarienvergleich - Robuste Eigenschaften von Klimaschutzpfaden zur Treibhausgasneutralit{\"a}t 2045 und relevante Unsicherheiten}, publisher = {Kopernikus-Projekte}, address = {Potsdam}, pages = {54 S.}, abstract = {Im Rahmen der vier Kopernikus-Projekte - Ariadne, ENSURE, P2X und SynErgie - wird die Transformation des deutschen Energiesystems hin zur Klimaneutralit{\"a}t analysiert. Im vorliegenden Bericht werden hierbei robuste Kernaussagen und relevante Unsicherheiten derjenigen Szenarien der Kopernikus-Schwesterprojekte dargestellt, die zur Zielsetzung die Klimaneutralit{\"a}t 2045 haben. Hierbei liegt der Fokus auf Indikatoren, die eine besonders hohe klimapolitische Relevanz haben.}, language = {de} } @inproceedings{FuhrmannNiemetz, author = {Fuhrmann, Thomas and Niemetz, Michael}, title = {Analysis and Improvement of Engineering Exams Toward Competence Orientation by Using an AI Chatbot}, series = {Towards a Hybrid, Flexible and Socially Engaged Higher Education: Proceedings of the 26th International Conference on Interactive Collaborative Learning (ICL2023), Volume 1}, booktitle = {Towards a Hybrid, Flexible and Socially Engaged Higher Education: Proceedings of the 26th International Conference on Interactive Collaborative Learning (ICL2023), Volume 1}, publisher = {Springer Nature}, address = {Cham}, isbn = {9783031519789}, issn = {2367-3370}, doi = {10.1007/978-3-031-51979-6_42}, pages = {403 -- 411}, abstract = {ChatGPT is currently one of the most advanced general chatbots. This development leads to diverse challenges in higher education, like new forms of teaching and learning, additional exam methods, new possibilities for plagiarism, and many more topics. On the other side with the development of advanced AI tools, pure knowledge will be less and less important, and demands from industry will change toward graduates with higher competencies. Education has therefore to be changed from knowledge-centered toward competence centered. The goal of this article is to use ChatGPT for analyzing and improving the competence orientation of exams in engineering education. The authors use ChatGPT to analyze exams from different engineering subjects to evaluate the performance of this chatbot and draw conclusions about the competence orientation of the tested exams. The obtained information is used to develop ideas for increasing the competence orientation of exams. From this analysis, it is visible that ChatGPT gives good performance mainly where knowledge is tested. It has, however, much more problems with transfer questions or tasks where students need creativity or complex insights for finding new solutions. Based on this result, exams and also lectures can be optimized toward competence orientation.}, language = {en} } @article{LindnerPipaKarpenetal., author = {Lindner, Matthias and Pipa, Andrei V. and Karpen, Norbert and Hink, Ruediger and Berndt, Dominik and Foest, R{\"u}diger and Bonaccurso, Elmar and Weichwald, Robert and Friedberger, Alois and Caspari, Ralf and Brandenburg, Ronny and Schreiner, Rupert}, title = {Icing Mitigation by MEMS-Fabricated Surface Dielectric Barrier Discharge}, series = {Applied Sciences}, volume = {11}, journal = {Applied Sciences}, number = {23}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app112311106}, pages = {1 -- 17}, abstract = {Avoiding ice accumulation on aerodynamic components is of enormous importance to flight safety. Novel approaches utilizing surface dielectric barrier discharges (SDBDs) are expected to be more efficient and effective than conventional solutions for preventing ice accretion on aerodynamic components. In this work, the realization of SDBDs based on thin-film substrates by means of micro-electro-mechanical-systems (MEMS) technology is presented. The anti-icing performance of the MEMS SDBDs is presented and compared to SDBDs manufactured by printed circuit board (PCB) technology. It was observed that the 35 mu m thick electrodes of the PCB SDBDs favor surface icing with an initial accumulation of supercooled water droplets at the electrode impact edges. This effect was not observed for 0.3 mu m thick MEMS-fabricated electrodes indicating a clear advantage for MEMS-technology SDBDs for anti-icing applications. Titanium was identified as the most suitable material for MEMS electrodes. In addition, an optimization of the MEMS-SDBDs with respect to the dielectric materials as well as SDBD design is discussed.}, language = {en} } @techreport{AndratschkeCeulloDawoudetal., author = {Andratschke, Christin and Ceullo, Laura and Dawoud, Belal and Draeger, Susan and Gerdes, Thorsten and Giebisch, Matthias and Grießhammer, Peter and Haas, Katharina and Haug, Sonja and Helling, Dominik and Kominis, Lena and Lang, Christian and Malz, Sebastian and Melzl, Johannes and Michlbauer, David and M{\"u}hlberger, Thomas and Nagl, Klaus and Preis, Michael and Rechenauer, Christian and Riederer, Michael and R{\"u}ckerl, Alexander and Saller, Tobias and Schnabl, Andreas and Stadler, Michael and Steffens, Oliver and Steininger, Peter and Stelzl, Andr{\´e} and Toutouly, Lovis and Trauner, Matthias and Vetter, Miriam and Walbrunn, Johannes and Weber, Karsten and Zielbauer, Lukas}, title = {MAGGIE: Energetische Modernisierung des genossenschaftlichen Wohnquartiers Margaretenau in Regensburg}, editor = {Steffens, Oliver}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-96256-100-0}, doi = {10.35096/othr/pub-5901}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-59011}, pages = {XVIII, 462 S.}, abstract = {Im Projekt MAGGIE wurden f{\"u}r das genossenschaftliche historische Stadtquartier „Margaretenau" in Regensburg Musterl{\"o}sungen f{\"u}r energieoptimiertes Wohnen mit innovativen Wandaufbauten aus solaraktiven Baukonstruktionen und einer vorhersagebasierten Versorgungstechnologie erforscht. Dazu wurde ein bestehendes Wohngeb{\"a}ude als Demonstrations- und Versuchsobjekt mit einem neuartigen, besonders effizienten Hybridsystem aus W{\"a}rmepumpentechnologie und Kraft- W{\"a}rme-Kopplung ausgestattet und untersucht, erg{\"a}nzt durch eine dynamische W{\"a}rmelogistik zur Verringerung von Verteilungsverlusten. Das System wurde durch ein neu entwickeltes, allgemein einsetzbares Planungs-, Optimierungs- und Steuerungstool ausgelegt und im Betrieb geregelt. Die in Echtzeit laufende Nachoptimierung des Systems w{\"a}hrend des Betriebs greift dabei auf reale Monitoringdaten zu. Die Einbindung von Nutzerbedarfsprofilen, Stromb{\"o}rse und Wetterdaten in die Steuerung gestattet einen dynamischen und perspektivischen Anlagenbetrieb zur Maximierung der Solar- und Umweltw{\"a}rme-Anteile der Energieversorgung und leistet damit einen wirksamen Beitrag zu einem emissionsarmen, klimafreundlichen Geb{\"a}udebetrieb. F{\"u}r die denkmalgerechte Modernisierung der historischen Fassaden wurde ein solaraktives und solaradaptives Außenputzsystem entwickelt und in der Realit{\"a}t getestet. Am Bestandsgeb{\"a}ude kam anstelle eines W{\"a}rmed{\"a}mmverbundsystems ein innovativer D{\"a}mmputz mit Mikrohohlglaskugeln zum Einsatz. Die Skalierbarkeit erlaubt eine abschnittsweise Modernisierung des gesamten Ensembles {\"u}ber mehrere Jahre. Durch die hohe Energieeffizienz wird die Warmmiete f{\"u}r die Bewohner der genossenschaftlichen Siedlung durch die Modernisierungsmaßnahmen nicht erh{\"o}ht, so dass auch nach der Modernisierung ein bezahlbares Wohnen sichergestellt wird.}, subject = {Altbaumodernisierung}, language = {de} } @inproceedings{FuhrmannNiemetz, author = {Fuhrmann, Thomas and Niemetz, Michael}, title = {Transdisciplinary Bachelor Course Connecting Business and Electrical Engineering}, series = {4th International Conference on Higher Education Advances (HEAd'18), 2018, Universitat Polit{\`e}cnica de Val{\`e}ncia, Val{\`e}ncia}, booktitle = {4th International Conference on Higher Education Advances (HEAd'18), 2018, Universitat Polit{\`e}cnica de Val{\`e}ncia, Val{\`e}ncia}, doi = {10.4995/HEAd18.2018.8056}, abstract = {The OTH Regensburg has a broad variety of study programs in technical, business, social and health sciences. Up to now there is no integral connection in the bachelor curricula between business and technical faculties except for some small subjects. The scope of this project is to develop a new course specialization which connects engineering and business thinking. Electrical engineering students should learn basics of business science and how managers think. Business students should vice versa learn fundamentals of engineering and how engineers solve problems. Students from both faculties work together in projects where they act like start-up companies developing a new product and bringing it into the market. It is seen a transdisciplinary effect: These projects gain innovative results between the disciplines compared to student projects of one isolated discipline. Evaluation results from the first two cohorts indicate high student satisfaction, high learning success as well as directions for further improvement.}, language = {en} } @article{SteinkirchnerFuhrmannNiemetz, author = {Steinkirchner, Alfons and Fuhrmann, Thomas and Niemetz, Michael}, title = {Channel Coded Processor for Enhanced Safety}, series = {International Journal of Future Computer and Communication (IJFCC)}, volume = {6}, journal = {International Journal of Future Computer and Communication (IJFCC)}, number = {2}, publisher = {International Association of Computer Science and Information}, address = {Singapore}, issn = {2010-3751}, doi = {10.18178/ijfcc.2017.6.2.489}, pages = {58 -- 62}, abstract = {Several concepts are known for improving processor safety, all of them having their pros and cons. Some are very resource intensive, others have limited capabilities regarding the provided error safety. In this paper we use research on channel coding of noisy communication channels known from communication theory as an analogy to random bit errors in processors. We incorporate this knowledge into processor design to suggest a new error correction concept by using channel coding in processors. The new concept of a Channel Coded Processor could provide effective implementation of redundancy by the channel coding that enables error correction. The concept could also create a complete chain of redundancy in all areas and components of the processor ranging from the code compiler through the processing hardware to the output of the information.}, language = {en} } @article{SalamaKouDawoudetal., author = {Salama, Amgad and Kou, Jisheng and Dawoud, Belal and Simonson, Carey}, title = {A modeling approach for capillary-driven flow of a wetting fluid in a rectangular open microchannel of arbitrary axisymmetric width profile}, series = {International Journal of Thermal Sciences}, volume = {195}, journal = {International Journal of Thermal Sciences}, publisher = {Elsevier}, issn = {1290-0729}, doi = {10.1016/j.ijthermalsci.2023.108622}, pages = {17}, abstract = {Microchips are intensively used in almost all nowadays electronic devices. With the continuous advancement of our technologies, they get smaller in size than ever before. They generate high-intensity heat loads that need to be transported effectively such that they may function properly. Heat pipes have proven to be very effective in transporting relatively large heat loads from miniature components. They are of seamless structure that involves a working fluid capable of evaporation and condensation at the working temperature of the electronic chips. The working fluid is derived to move from the condenser to the evaporator via multiple microgrooves using capillary forces. It is important that the condensate reaches the evaporator at a proper rate such that no dry-out or flooding occur. In this work, we are particularly interested in the case of capillary-driven flows in rectangular microchannels. A generalized model is developed that works for axe-symmetric rectangular channels of arbitrary, moderately varying width profiles. It also accounts for any contrast of viscosity between the liquid and the vapor under isothermal conditions. The model shows to reduce to the special case of imbibition in straight and uniform microchannels, for which comparisons with experimental and modeling works show an excellent match. Cases representing linearly and quadratically varying converging/diverging width profiles have been explored. It is found that the viscosity ratio has a significant influence on the rate at which the meniscus advances. The model also negates the common practice found in the literature of using the formula developed for imbibition rates in capillary tubes for rectangular microchannels by replacing the diameter of the tube with the hydraulic diameter. It is also found that the channel profile has an influential effect on the imbibition rates. For tapered microchannels, the capillary force increases along the channel length while it decreases for diverging ones. It is interestingly demonstrated that, for quadratically tapered microchannel, the speed of the meniscus increases towards the end of the microchannel compared with linearly varying microchannels. On the other hand, for diverging microchannels, the speed of the meniscus decreases due to the increase in the cross-sectional area. Computational fluid dynamics (CFD) analysis has been conducted to provide a framework for confirmation and verification for which very good match has been established, which builds confidence in the modeling approach.}, language = {en} } @inproceedings{ZengerKennerVolbertetal., author = {Zenger, Gerhard and Kenner, Susanne and Volbert, Klaus and Waas, Thomas and Kucera, Markus}, title = {Acquiring energy data from a medium-voltage grid for future smart grid solutions: A practical smart grid application example realized by use of cellular communication networks of the 2nd and 3rd generation}, series = {Proceedings of the 11th Workshop on Intelligent Solutions in Embedded Systems (WISES), 10-11 Sept. 2013, Pilsen, Czech Republic}, booktitle = {Proceedings of the 11th Workshop on Intelligent Solutions in Embedded Systems (WISES), 10-11 Sept. 2013, Pilsen, Czech Republic}, publisher = {IEEE}, isbn = {978-3-00-042899-9}, pages = {1 -- 8}, abstract = {In this paper we present a practical example of the use of Cellular Communication standards like GPRS and UMTS in a Smart Grid Application. For a more detailed view we demonstrate a possible implementation of Cellular Communication Technologies in a data acquisition application for the collection of energy indicators in a medium-voltage grid. Furthermore, we show a technical overview of relevant and common mobile communication standards available in Germany. The included theoretical examples, Smart Grid scenarios, presented data and results are based on a research project for intelligent power regulation in medium-voltage grids performed in Regensburg (Germany). It is a joint project' of the University of Applied Sciences Regensburg together with a local energy provider and a manufacturer for distribution network systems.}, language = {en} } @inproceedings{KennerThalerKuceraetal., author = {Kenner, Susanne and Thaler, Raphael and Kucera, Markus and Volbert, Klaus and Waas, Thomas}, title = {Smart Grid architecture for monitoring and analyzing, including modbus and REST performance comparison}, series = {International Workshop on Intelligent Solutions in Embedded Systems (WISES), 12th, 29.-30. Oct. 2015, Ancona, Italy}, booktitle = {International Workshop on Intelligent Solutions in Embedded Systems (WISES), 12th, 29.-30. Oct. 2015, Ancona, Italy}, isbn = {978-8-8875-4808-2}, pages = {96}, abstract = {Smart Grid, Smart Metering, Electromobility and the regulation of the power network are keywords of the transition in energy policies. In the future, the power grid will be smart. Due to this the OTH Regensburg does research in this area based on different projects. This paper presents a data collection, analyzing and monitoring software for a reference Smart Grid. We discuss two possible architectures for collecting data from energy analyzers. The performance is analyzed with respect to real-time monitoring, analyzing load peaks and automated regulation of the power grid.}, language = {en} } @inproceedings{SchweibererRauchBrueckl, author = {Schweiberer, Philipp and Rauch, Johannes and Br{\"u}ckl, Oliver}, title = {Control strategy for industrial reactive power sources depending on a specified reactive power setpoint value}, series = {ETG Kongress 2023: Die Energiewende beschleunigen, 25.-26. Mai 2023, Kassel, Germany}, booktitle = {ETG Kongress 2023: Die Energiewende beschleunigen, 25.-26. Mai 2023, Kassel, Germany}, publisher = {VDE VERLAG}, address = {Berlin}, organization = {Energietechnische Gesellschaft }, isbn = {978-3-8007-6108-1}, pages = {553 -- 558}, abstract = {Industrial plants can provide reactive power (Q) for system- and grid-serving behavior, for which a functioning reactive power management system is essential. To make reactive power retrieval as efficient and safe as possible, the selection of reactive power sources to meet the Q-demand must consider their sensitivities and the restrictions of the industrial grid, such as operating equipment utilization or voltage limits. On this basis, a concept for a sensitivity-based control strategy that manages the reactive power retrieval of multiple reactive power sources depending on a predefined reactive power demand value is proposed. Based on the simulation of an industrial plant in the medium-voltage grid, which can provide reactive power in the form of industrial compensation systems (ICS) and generators, the operation of the algorithm is shown.}, language = {en} } @inproceedings{RiegerOetjenvandeParetal., author = {Rieger, Anna and Oetjen, Arne and van de Par, Steven and Rabl, Hans-Peter}, title = {Einfluss der Dissonanz auf die Wahrnehmung der Ger{\"a}uschqualit{\"a}t}, series = {Fortschritte der Akustik DAGA 2022: 48. Jahrestagung f{\"u}r Akustik, 21. - 24. M{\"a}rz 2022, Stuttgart und Online}, volume = {48}, booktitle = {Fortschritte der Akustik DAGA 2022: 48. Jahrestagung f{\"u}r Akustik, 21. - 24. M{\"a}rz 2022, Stuttgart und Online}, publisher = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, address = {Stuttgart}, language = {de} } @techreport{AndratschkeCeulloDawoudetal., author = {Andratschke, Christin and Ceullo, Laura and Dawoud, Belal and Draeger, Susan and Gerdes, Thorsten and Giebisch, Matthias and Grießhammer, Peter and Haas, Katharina and Haug, Sonja and Helling, Dominik and Kominis, Lena and Lang, Christian and Malz, Sebastian and Melzl, Johannes and Michlbauer, David and M{\"u}hlberger, Thomas and Nagl, Klaus and Preis, Michael and Rechenauer, Christian and Riederer, Michael and R{\"u}ckerl, Alexander and Saller, Tobias and Schnabl, Andreas and Stadler, Michael and Steffens, Oliver and Steininger, Peter and Stelzl, Andr{\´e} and Toutouly, Lovis and Trauner, Matthias and Vetter, Miriam and Walbrunn, Johannes and Weber, Karsten and Zielbauer, Lukas}, title = {MAGGIE: Energetische Modernisierung des genossenschaftlichen Wohnquartiers Margaretenau in Regensburg}, editor = {Steffens, Oliver}, address = {Regensburg}, isbn = {978-3-96256-100-0}, doi = {10.35096/othr/pub-5335}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-53354}, pages = {XVIII, 462 S.}, abstract = {Im Projekt MAGGIE wurden f{\"u}r das genossenschaftliche historische Stadtquartier „Margaretenau" in Regensburg Musterl{\"o}sungen f{\"u}r energieoptimiertes Wohnen mit innovativen Wandaufbauten aus solaraktiven Baukonstruktionen und einer vorhersagebasierten Versorgungstechnologie erforscht. Dazu wurde ein bestehendes Wohngeb{\"a}ude als Demonstrations- und Versuchsobjekt mit einem neuartigen, besonders effizienten Hybridsystem aus W{\"a}rmepumpentechnologie und Kraft- W{\"a}rme-Kopplung ausgestattet und untersucht, erg{\"a}nzt durch eine dynamische W{\"a}rmelogistik zur Verringerung von Verteilungsverlusten. Das System wurde durch ein neu entwickeltes, allgemein einsetzbares Planungs-, Optimierungs- und Steuerungstool ausgelegt und im Betrieb geregelt. Die in Echtzeit laufende Nachoptimierung des Systems w{\"a}hrend des Betriebs greift dabei auf reale Monitoringdaten zu. Die Einbindung von Nutzerbedarfsprofilen, Stromb{\"o}rse und Wetterdaten in die Steuerung gestattet einen dynamischen und perspektivischen Anlagenbetrieb zur Maximierung der Solar- und Umweltw{\"a}rme-Anteile der Energieversorgung und leistet damit einen wirksamen Beitrag zu einem emissionsarmen, klimafreundlichen Geb{\"a}udebetrieb. F{\"u}r die denkmalgerechte Modernisierung der historischen Fassaden wurde ein solaraktives und solaradaptives Außenputzsystem entwickelt und in der Realit{\"a}t getestet. Am Bestandsgeb{\"a}ude kam anstelle eines W{\"a}rmed{\"a}mmverbundsystems ein innovativer D{\"a}mmputz mit Mikrohohlglaskugeln zum Einsatz. Die Skalierbarkeit erlaubt eine abschnittsweise Modernisierung des gesamten Ensembles {\"u}ber mehrere Jahre. Durch die hohe Energieeffizienz wird die Warmmiete f{\"u}r die Bewohner der genossenschaftlichen Siedlung durch die Modernisierungsmaßnahmen nicht erh{\"o}ht, so dass auch nach der Modernisierung ein bezahlbares Wohnen sichergestellt wird.}, subject = {Altbaumodernisierung}, language = {de} } @inproceedings{KrausBrueckl, author = {Kraus, Hermann and Br{\"u}ckl, Oliver}, title = {Automated use of wired measures in grid planning for solving current and voltage band problems}, series = {Power and Energy Student Summit (PESS) 2019, Magdeburg}, volume = {77}, booktitle = {Power and Energy Student Summit (PESS) 2019, Magdeburg}, publisher = {Otto-von-Guericke-Universit{\"a}t, Institut f{\"u}r Elektrische Energiesysteme}, address = {Magdeburg}, isbn = {978-3-944722-84-9}, doi = {10.24352/UB.OVGU-2019-086}, pages = {207 -- 211}, abstract = {This work deals with the use of cable exchange and parallel cabling as network expansion measures in the context of an automated grid planning for the elimination of current and voltage band problems in a distribution network. Inter alia, reference is made to a higher-level program, which is being developed in the EU project "CrossEnergy", and the procedures for remedying the limit value violations are presented.}, subject = {Netzplanung}, language = {en} } @unpublished{SchummAbdelKhalekBrownetal., author = {Schumm, Leon and Abdel-Khalek, Hazem and Brown, Tom and Ueckerdt, Falko and Sterner, Michael and Fioriti, Davide and Parzen, Max}, title = {The impact of temporal hydrogen regulation on hydrogen exporters and their domestic energy transition}, publisher = {Research Square Platform LLC}, doi = {10.21203/rs.3.rs-4285425/v1}, abstract = {As global demand for green hydrogen rises, potential hydrogen exporters move into the spotlight. However, the large-scale installation of on-grid hydrogen electrolysis for export can have profound impacts on domestic energy prices and energy-related emissions. Our investigation explores the interplay of hydrogen exports, domestic energy transition and temporal hydrogen regulation, employing a sector-coupled energy model in Morocco. We find substantial co-benets of domestic climate change mitigation and hydrogen exports, whereby exports can reduce domestic electricity prices while mitigation reduces hydrogen export prices. However, increasing hydrogen exports quickly in a system that is still dominated by fossil fuels can substantially raise domestic electricity prices, if green hydrogen production is not regulated. Surprisingly, temporal matching of hydrogen production lowers domestic electricity cost by up to 31\% while the effect on exporters is minimal. This policy instrument can steer the welfare (re-)distribution between hydrogen exporting firms, hydrogen importers, and domestic electricity consumers and hereby increases acceptance among actors.}, language = {en} } @inproceedings{Haumer, author = {Haumer, Anton}, title = {Modeling and Control Design of an Educational Magnetic Levitation System}, series = {Proceedings of the 15th International Modelica Conference 2023, Aachen, October 9-11}, booktitle = {Proceedings of the 15th International Modelica Conference 2023, Aachen, October 9-11}, publisher = {Link{\"o}ping University Electronic Press}, issn = {1650-3686}, doi = {10.3384/ecp204763}, abstract = {A magnetic levitation system is a perfect educational example of a nonlinear unstable system. Only with suitable control, a small permanent magnet can be held floating stable below a coil. After modeling and simulation of the system, control of the system can be developed. At the end, the control algorithm can be coded on a microcontroller, connected to a pilot plant.}, language = {en} } @book{RillSchaeffer, author = {Rill, Georg and Schaeffer, Thomas}, title = {Grundlagen und Methodik der Mehrk{\"o}rpersimulation : Vertieft in Matlab-Beispielen, {\"U}bungen und Anwendungen}, publisher = {Springer}, address = {Berlin}, doi = {10.1007/978-3-658-06084-8}, pages = {215}, abstract = {Dieses Lehrbuch vermittelt nicht nur Grundlagen, sondern stellt auch die Methoden der Mehrk{\"o}rpersimulation anschaulich dar und erl{\"a}utert an einfachen Beispielen die Vor- und Nachteile bei der praktischen Anwendung. In den Text integrierte Matlab-Skripte und -Funktionen verdeutlichen die einzelnen Methoden und erm{\"o}glichen es, Aufwand und Problematik bei der Umsetzung der Theorie innerhalb von Simulationsprogrammen einzusch{\"a}tzen. Die Modellbildung, die mathematische Beschreibung und die numerische Simulation von Systemen starrer K{\"o}rper bilden dabei die Schwerpunkte. Konkret behandelte Beispiele sind die Eigendynamik eines Traktors mit gefederter Vorderachse, das Rotorblatt eines Hubschraubers sowie die Vorderachse eines Pkws. Die entsprechenden Matlab-Skripte und L{\"o}sungen zu den {\"U}bungsaufgaben k{\"o}nnen auf der Springer-Homepage beim Buch heruntergeladen werden. Der Inhalt Dynamik des starren K{\"o}rpers - Bewegungsgleichungen - Starre K{\"o}rper mit elastischen und kinematischen Verbindungselementen - Integrationsverfahren - Rekursiver Algorithmus - Differential-Algebraische Gleichungen - Analyse von Mehrk{\"o}rpersystemen - Anwendungs- und {\"U}bungsbeispiele aus der Technik Die Zielgruppen Studenten des Maschinenbaus, der Elektrotechnik und Mechatronik sowie der Biomechanik an Hochschulen und Universit{\"a}ten Ingenieure in der Praxis, die sich mit Fragestellungen der Mehrk{\"o}rpersimulation (MKS) befassen Entwickler aus der Kfz-Technik sowie Fachleute aus F+E Die Autoren Dr.-Ing. Georg Rill ist Professor mit den Lehrgebieten Technische Mechanik, Ingenieurinformatik, Fahrdynamik, Mehrk{\"o}rperdynamik sowie Laborleiter Fahrdynamik. Dr.-Ing. Thomas Schaeffer ist Professor mit den Lehrgebieten Konstruktion, CAD, Maschinenelemente und Getriebetechnik, Mehrk{\"o}rpersysteme und Bewegungstechnik sowie Laborleiter Mehrk{\"o}rpersimulation, beide an der Ostbayerischen Technischen Hochschule (OTH) Regensburg.}, language = {de} } @book{RillSchaeffer, author = {Rill, Georg and Schaeffer, Thomas}, title = {Grundlagen und Methodik der Mehrk{\"o}rpersimulation}, edition = {3. Aufl.}, publisher = {Springer}, address = {Wiesbaden}, isbn = {978-3-658-16008-1}, doi = {10.1007/978-3-658-16009-8}, abstract = {Dieses Lehrbuch stellt die Methoden der Mehrk{\"o}rpersimulation anschaulich dar und erl{\"a}utert an einfachen Beispielen die Vor- und Nachteile bei der praktischen Anwendung. In den Text integrierte Matlab-Skripte und -Funktionen verdeutlichen die einzelnen Methoden. Die Modellbildung, die mathematische Beschreibung und die numerische Simulation von Systemen starrer K{\"o}rper bilden dabei die Schwerpunkte. Konkrete Beispiele beinhalten die Eigendynamik eines Traktors mit Vorderachsfederung, das Hubschrauberrotorblatt sowie eine Pkw- Vorderachse. Die entsprechenden Matlab-Skripte und L{\"o}sungen zu den {\"U}bungsaufgaben k{\"o}nnen auf der Springer-Homepage beim Buch heruntergeladen werden. Neu aufgenommen wurden SparseMatrix Operationen sowie ein Beispiel zu einfach geschlossenen kinematischen Schleifen.}, language = {de} } @article{KeinerRamBarbosaetal., author = {Keiner, Dominik and Ram, Manish and Barbosa, Larissa de Souza Noel Simas and Bogdanov, Dmitrii and Breyer, Christian}, title = {Cost optimal self-consumption of PV prosumers with stationary batteries, heat pumps, thermal energy storage and electric vehicles across the world up to 2050}, series = {Solar Energy}, volume = {185}, journal = {Solar Energy}, publisher = {Elsevier}, doi = {10.1016/j.solener.2019.04.081}, pages = {406 -- 423}, abstract = {Globally, PV prosumers account for a significant share of the total installed solar PV capacity, which is a growing trend with ever-increasing retail electricity prices. Further propelled by performance improvements of solar PV and innovations that allow for greater consumer choice, with additional benefits such as cost reductions and availability of incentives. PV prosumers may be one of the most important enablers of the energy transition. PV prosumers are set to gain the most by maximising self-consumption, while avoiding large amounts of excess electricity being fed into the grid. Additionally, electricity and heat storage technologies, heat pumps and battery electric vehicles are complementary to achieve the highest possible self-consumption shares for residential PV prosumer systems, which can reach grid-parity within this decade in most regions of the world. This research finds the cost optimal mix of the various complementary technologies such as batteries, electric vehicles, heat pumps and thermal heat storage for PV prosumers across the world by exploring 4 different scenarios. Furthermore, the research presents the threshold for economical maximum battery capacity per installed PV capacity, along with self-consumption ratios, demand cover ratios and heat cover ratios for 145 different regions across the world. This is a first of its kind study to conduct a global analysis of PV prosumers with a range of options to meet their complete energy demand from a future perspective, up to 2050. Maximising self-consumption from solar PV generation to meet all energy needs will be the most economical option in the future, for households across most regions of the world.}, language = {en} }