@article{MetschSchmidtSindersbergeretal., author = {Metsch, P. and Schmidt, H. and Sindersberger, Dirk and Kalina, K. A. and Brummund, J. and Auernhammer, G{\"u}nter and Monkman, Gareth J. and K{\"a}stner, Markus}, title = {Field-Induced Interactions in Magneto-Active Elastomers}, series = {Smart Materials and Structures}, volume = {29}, journal = {Smart Materials and Structures}, number = {8}, publisher = {IOPscience}, doi = {10.1088/1361-665X/ab92dc}, pages = {1 -- 10}, abstract = {In this contribution, field-induced interactions of magnetizable particles embedded into a soft elastomer matrix are analyzed with regard to the resulting mechanical deformations. By comparing experiments for two-, three- and four-particle systems with the results of finite element simulations, a fully coupled continuum model for magneto-active elastomers is validated with the help of real data for the first time. The model under consideration permits the investigation of magneto-active elastomers with arbitrary particle distances, shapes and volume fractions as well as magnetic and mechanical properties of the individual constituents. It thus represents a basis for future studies on more complex, realistic systems. Our results show a very good agreement between experiments and numerical simulations—the deformation behavior of all systems is captured by the model qualitatively as well as quantitatively. Within a sensitivity analysis, the influence of the initial particle positions on the systems' response is examined. Furthermore, a comparison of the full three-dimensional model with the often used, simplified two-dimensional approach shows the typical overestimation of resulting interactions in magneto-active elastomers.}, language = {en} } @article{SchwanzerSchillingerMieslingeretal., author = {Schwanzer, Peter and Schillinger, Maximilian and Mieslinger, Johann and Walter, Stefanie and Hagen, Gunter and Maerkl, Susanne and Haft, Gerhard and Dietrich, Markus and Moos, Ralf and Gaderer, Matthias and Rabl, Hans-Peter}, title = {A Synthetic Ash-Loading Method for Gasoline Particulate Filters with Active Oil Injection}, series = {SAR International Journal of Engines}, volume = {14}, journal = {SAR International Journal of Engines}, number = {4}, publisher = {SAE International}, issn = {1946-3936}, doi = {10.4271/03-14-04-0029}, pages = {493 -- 506}, abstract = {To reduce particulate emissions, the use of particulate filters in diesel engines is meanwhile state of the art, while the integration of such systems in gasoline engines is now also necessary in order to comply with today's regulations. Over its lifetime, a gasoline particulate filter (GPF) collects ash components of fuel, lubrication oil, and materials originating from the catalytic coating and from engine abrasion. In the development and application process, synthetic ashing from GPFs is challenging. The ash of the lubrication oil can be increased in various ways, like oil-doped fuel, a separate oil burner, or changes in the piston-cylinder system of the engine. However, these methods show major disadvantages. For this reason, an improved approach is presented in this study, which allows a quick response to changes in combustion (e.g., engine knocking) and producing ash, which is more realistic due to its primary particle size and the density of ash plugs, in a shorter time. Therefore, an approach to accelerate ash loading by active oil injection using a multi-point injection (MPI) system is introduced. With the help of this methodology, an ashing capacity of 1.21 g/h is implemented, which is a high rate compared to other investigations. The primary particle size (evaluated by means of a transmission electron microscope), is in the same size range as those detected at the full-load curve during regular operation. A computer tomographic (CT) analysis of the incinerated particulate filter also shows that a very high density of ash plugs can be realized, which has also been found in the literature for real applications. In addition, with the help of a mass spectrometer (MS) and an intermediate weighing of the particulate filter, the current ash loading of the GPF could be determined with an accuracy of 1\%.}, language = {en} } @article{SchmidtStraubSindersbergeretal., author = {Schmidt, Henrik and Straub, Benedikt B. and Sindersberger, Dirk and Br{\"o}ckel, Ulrich and Monkman, Gareth J. and Auernhammer, G{\"u}nter}, title = {Collision and separation of nickel particles embedded in a Poly dimethylsiloxan matrix under a rotating magnetic field: A strong magneto active function}, series = {Colloid and Polymer Science}, volume = {299}, journal = {Colloid and Polymer Science}, publisher = {Springer}, doi = {10.1007/s00396-020-04784-4}, pages = {955 -- 967}, abstract = {In order to function as soft actuators, depending on their field of use, magnetorheological elastomers (MREs) must fulfill certain criteria. To name just a few, these can include rapid response to external magnetic fields, mechanical durability, mechanical strength, and/or large deformation. Of particular interest are MREs which produce macroscopic deformation for small external magnetic field variations. This work demonstrates how this can be achieved by just a small change in magnetic field orientation. To achieve this, (super)paramagnetic nickel particles of size ≈ 160 μm were embedded in a non-magnetic polydimethylsiloxan (PDMS) (661-1301 Pa) and their displacement in a stepwise rotated magnetic field (170 mT) recorded using a video microscope. Changes in particle aggregation resulting from very small variations in magnetic field orientation led to the observation of a new strongly magneto-active effect. This configuration is characterized by an interparticle distance in relation to the angle difference between magnetic field and particle axis. This causes a strong matrix deformation which in turn demonstrates hysteresis on relaxation. It is shown that the occurrence strongly depends on the particle size, particle distance, and stiffness of the matrix. Choosing the correct parameter combination, the state can be suppressed and the particle-matrix system demonstrates no displacement or hysteresis. In addition, evidences of non-negligible higher order magnetization effects are experimentally ascertained which is qualitatively in agreement with similar, already theoretically described, particle systems. Even at larger particle geometries, the new strongly magneto-active configuration is preserved and could create macroscopic deformation changes.}, language = {en} } @article{KeinerThomaBogdanovetal., author = {Keiner, Dominik and Thoma, Christian and Bogdanov, Dmitrii and Breyer, Christian}, title = {Seasonal hydrogen storage for residential on- and off-grid solar photovoltaics prosumer applications: Revolutionary solution or niche market for the energy transition until 2050?}, series = {Applied Energy}, volume = {340}, journal = {Applied Energy}, publisher = {Elsevier}, doi = {10.1016/j.apenergy.2023.121009}, pages = {17}, abstract = {Appropriate climate change mitigation requires solutions for all actors of the energy system. The residential sector is a major part of the energy system and solutions for the implementation of a seasonal hydrogen storage system in residential houses has been increasingly discussed. A global analysis of prosumer systems including seasonal hydrogen storage with water electrolyser, hydrogen compressor, storage tank, and a fuel cell studying the role of such a seasonal household storage in the upcoming decades is not available. This study aims to close this research gap via the improved LUT-PROSUME model, which models a fully micro sector coupled residential photovoltaic prosumer system with linear optimisation for 145 regions globally. The modelling of the cost development of hydrogen storage components allows for the simulation of a residential system from 2020 until 2050 in 5-year steps in hourly resolution. The systems are cost-optimised for either on- or off-grid operation in eight scenarios including battery electric vehicles, which can act as an additional vehicle-to-home electricity storage for the system. Results show that implementation of seasonal hydrogen systems only occurs in least cost solutions in high latitude countries when the system is forced to run in off-grid mode. In general, a solar photovoltaic plus battery system including technologies that can cover the heat demand is the most economic choice and can even achieve lower cost than a full grid supply in off-grid operation for most regions until 2050. Additional parameters including the self-consumption ratio, the demand cover ratio, and the heat cover ratio can therefore not be improved by seasonal storage systems if economics is the main deciding factor for a respective system. Further research opportunities and possible limitations of the system are then identified.}, language = {en} } @inproceedings{RiegerOetjenvandeParetal., author = {Rieger, Anna and Oetjen, Arne and van de Par, Steven and Rabl, Hans-Peter}, title = {Geh{\"o}rbezogene Modellierung der Dissonanz}, series = {Tagungsband DAGA 2021: 47. Jahrestagung f{\"u}r Akustik, 15.-18. August 2021, Wien und Online}, volume = {47}, booktitle = {Tagungsband DAGA 2021: 47. Jahrestagung f{\"u}r Akustik, 15.-18. August 2021, Wien und Online}, publisher = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, pages = {1034 -- 1037}, language = {de} } @inproceedings{FrauenschlaegerDentgenMottok, author = {Frauenschl{\"a}ger, Tobias and Dentgen, Manuel and Mottok, J{\"u}rgen}, title = {Systemarchitektur eines Sicherheitsmoduls im Energiesektor}, series = {Tagungsband 2. Symposium Elektronik und Systemintegration ESI 2020: "Intelligente Systeme und ihre Komponenten: Forschung und industrielle Anwendung"}, booktitle = {Tagungsband 2. Symposium Elektronik und Systemintegration ESI 2020: "Intelligente Systeme und ihre Komponenten: Forschung und industrielle Anwendung"}, address = {Landshut}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:860-opus4-2092}, pages = {29 -- 38}, abstract = {Aufgrund der immer weiter anwachsenden Vernetzung der Stromnetze wird die Kommunikation zwischen der Leitstelle des Energieversorgers und den Infrastrukturkomponenten innerhalb eines Umspannwerks immer bedeutsamer. Dabei werden sowohl Steuerbefehle als auch Daten f{\"u}r {\"U}berwachungsfunktionen {\"u}bertragen. In den aktuellen Netzwerkarchitekturen findet diese Kommunikation ohne eine kryptografische Absicherung statt, was einen Angriffspunkt f{\"u}r gezielte Attacken und damit eine potenzielle Gef{\"a}hrdung der Energieversorgung darstellt. Um solchen Angriffen in Zukunft entgegenzuwirken, wird das ES³M-Sicherheitsmodul entwickelt. Dieses soll in das Netzwerk zwischen den beiden Kommunikationspartnern eingesetzt werden und so den Datenverkehr absichern. Mithilfe einer Bedrohungsanalyse wurden Anforderungen abgeleitet, die neben kryptografischen Maßnahmen auch Themen wie funktionale Sicherheit und Langlebigkeit umfassen. Um diese zu erf{\"u}llen, wurde eine spezielle Systemarchitektur auf Basis einer Aufgabenteilung entworfen. Diese Architektur und korrespondierende Designentscheidungen werden pr{\"a}sentiert.}, language = {de} } @inproceedings{LaloSailerMottoketal., author = {Lalo, Erjola and Sailer, Andreas and Mottok, J{\"u}rgen and Siemers, Christian}, title = {Overhead-Aware Schedule Synthesis for Logical Execution Time (LET) in Automotive Systems}, series = {2022 IEEE 35th International System-on-Chip Conference (SOCC): 05-08 September 2022, Belfast, United Kingdom}, booktitle = {2022 IEEE 35th International System-on-Chip Conference (SOCC): 05-08 September 2022, Belfast, United Kingdom}, publisher = {IEEE}, isbn = {978-1-6654-5985-3}, doi = {10.1109/SOCC56010.2022.9908103}, pages = {1 -- 6}, abstract = {The Logical Execution Time (LET) has recently been integrated in multi-core automotive systems to ensure timing and dataflow determinism. Although buffering mechanisms are introduced to incorporate LET semantics, they do not guarantee that tasks are executed within their LET frames. In fact, LET and buffering semantics are violated if scheduling is not designed to execute all tasks within their LET frames and in a specific order. In this paper, we describe a scheduling synthesis technique for Fixed-Priority Scheduling (FPS) to achieve resource-efficient execution of LET systems. The proposed approach considers LET semantics, scheduling overheads, and delays caused by operating system operations and provides the possibility to optimize the schedule with respect to aspects like scheduling overheads. Our performance and feasibility evaluation shows that the proposed algorithm provides results in a reasonable amount of time for models of complex industrial applications. Thus, the integration of the proposed algorithm into an automated process is of high benefit to accelerate the development of vehicle applications.}, language = {en} } @inproceedings{MuchaMottokKraemer, author = {Mucha, Matthias and Mottok, J{\"u}rgen and Kr{\"a}mer, Stefan}, title = {Estimation of Worst Case Response Time Boundaries in Multi-Core Real-Time Systems}, series = {2017 International Conference on Applied Electronics (AE), 5-6 Sept. 2017, Pilsen}, booktitle = {2017 International Conference on Applied Electronics (AE), 5-6 Sept. 2017, Pilsen}, publisher = {IEEE}, isbn = {978-80-261-0641-8}, issn = {1803-7232}, doi = {10.23919/ae.2017.8053598}, pages = {1 -- 6}, abstract = {We address a novel probabilistic approach to estimate the Worst Case Response Time boundaries of tasks. Multi-core real-time systems process tasks in parallel on two or more cores. Tasks in our contribution may preempt other tasks, block tasks with semaphores to access global shared resources, or migrate to another core. The depicted task behavior is random. The shape of collected response times of a task within a processing time is multimodal. Extreme Value approaches need unimodal response time distributions to estimate the Worst Case Response Time of tasks. The new proposed method derives a set of three task set shapes from the source task set. It is used to minimize the uncertainty of random task behavior by maximizing the coverage of possible Worst Case Response Times. The case study evaluates the new proposed estimation method by the use of dynamically generated random tasks with varying task properties.}, language = {en} } @article{FederrathMottokPloessletal., author = {Federrath, H. and Mottok, J{\"u}rgen and Pl{\"o}ßl, K. and V{\"o}lkl, Thomas}, title = {Automotive safety and security}, series = {Jahresr{\"u}ckblick 2007 des Bayerischen IT-Sicherheitsclusters}, journal = {Jahresr{\"u}ckblick 2007 des Bayerischen IT-Sicherheitsclusters}, pages = {25}, language = {de} } @inproceedings{DeNiklasRooneyetal., author = {De, Sangita and Niklas, Michael and Rooney, Brian and Mottok, J{\"u}rgen and Brada, Premek}, title = {Towards Translation of Semantics of Automotive Interface Description Models from Franca to AUTOSAR Frameworks}, series = {2019 International Conference on Applied Electronics (AE), 10-11 Sept. 2019, Pilsen, Czech Republic}, booktitle = {2019 International Conference on Applied Electronics (AE), 10-11 Sept. 2019, Pilsen, Czech Republic}, publisher = {University of West Bohemia}, doi = {10.23919/AE.2019.8867018}, pages = {1 -- 6}, abstract = {The automotive industry is eventually evolving into a complex network of services. The heterogeneous and distributed nature of automotive software systems demands flexible software components which can operate in different environments. Because of heterogeneous automotive development environments, the domain experts, must cope with too many diversities, adaption layers, and incompatibilities to design applications for the current generation of autonomous driving vehicles. In this context, interface adaptation is a promising approach to achieve flexibility without directly changing the respective components. AUTOSAR, which is the de-facto standard for describing automotive system architecture and is a hugely comprehensive standard allowing designers full control from abstract system description to bare metal level deployment. However, the vehicle subsystems have still evolved to include multifarious high-level domains not covered by AUTOSAR e.g. Infotainment, Telematics etc. Therefore, it seems beneficial to bridge the semantic gaps between AUTOSAR applications and other standards of automotive application domains. The goal of this paper is to investigate interface semantic mapping and achieve transparent integration of domain-specific applications using the translation of semantics among the AUTOSAR platform software component models and other software components models of open source development platforms e.g. GENIVI. A key goal of such a modelling approach is the reuse of existing interface description languages and respective code generators. This will enhance future interoperability and decrease in incompatibility among these platforms.}, language = {en} }