@inproceedings{HaumerKral, author = {Haumer, Anton and Kral, Christian}, title = {Modeling a Mains connected PWM Converter with Voltage-Oriented Control}, series = {Proceedings of the 8th International Modelica Conference, Technical Univeristy, Dresden, Germany, 20.-22.03.2011}, booktitle = {Proceedings of the 8th International Modelica Conference, Technical Univeristy, Dresden, Germany, 20.-22.03.2011}, publisher = {Link{\"o}ping University Electronic Press}, doi = {10.3384/ecp11063388}, pages = {388 -- 397}, abstract = {The majority of industrial controlled induction machine drives are connected to the mains via a diode bridge. However; if reduction of harmonic currents and / or regenerative operation is desired; replacing the diode bridge by an active front-end (AFE) is required. This paper describes two models of an AFE: a power balance model disregarding switching effects; and an ideal switching model of a pulse width modulation (PWM) converter. Both models are controlled utilizing space phasors in a voltage oriented reference frame. Voltage oriented control (VOC) of the mains converter can be compared with field oriented control (FOC) of a machine converter. Design and parametrization of the main parts—synchronization with mains voltage; current controller and DC voltage controller—are described in detail. Additionally; simulation results proving the implementation and demonstrating possible investigations as well as an outlook on further enhancements are presented.}, language = {en} } @inproceedings{HaumerKral, author = {Haumer, Anton and Kral, Christian}, title = {The New EDrives Library: A Modular Tool for Engineering of Electric Drives}, series = {Proceedings of the 10th International Modelica Conference, March 10-12, 2014, Lund, Sweden}, booktitle = {Proceedings of the 10th International Modelica Conference, March 10-12, 2014, Lund, Sweden}, publisher = {Link{\"o}ping University Electronic Press}, isbn = {978-91-7519-380-9}, issn = {1650-3686}, doi = {10.3384/ecp14096155}, pages = {155 -- 163}, abstract = {Simulation is an indispensable tool for the engineering of systems containing electric drives. Depending on the design phase and the engineering task different levels of modeling details are required: proof of concept; investigation of energy and power consumption; design of control; etc. The new EDrives library provides three levels of abstraction for inverters: quasi static (neglecting electrical transients); averaging (neglecting switching effects) and switching - for serving different demands. The inverters can feed the machine models of the Modelica Standard Library: Modelica.Magnetic.FundamentalWave and the new Modelica.Magnetic.QuasiStatic.FundamentalWave. The EDrives library copes with arbitrary phase numbers and can be easily extended to develop new control algorithms. In this publication the structure of the library and the implemented control principles are presented. Furthermore; examples comparing the three different levels of abstraction are included.}, language = {en} } @incollection{GrabnerGraggerKapelleretal., author = {Grabner, Christian and Gragger, Johannes V. and Kapeller, Hansj{\"o}rg and Haumer, Anton and Kral, Christian}, title = {Sensorless PM-Drive Aspects}, series = {Electronic Engineering and Computing Technology}, booktitle = {Electronic Engineering and Computing Technology}, editor = {Ao, Sio-Iong and Gelman, Len}, publisher = {Springer}, address = {Dordrecht}, isbn = {978-90-481-8775-1}, doi = {10.1007/978-90-481-8776-8_3}, pages = {25 -- 35}, abstract = {The development procedure of permanent magnet drives for sensor less operation beginning from standstill under overload conditions has to consider different design aspects coevally. First, the robust rotor position sensing by test signal enforces a design with a strongly different behavior of the spatial dq-oriented differential inductance values. Therefore, the interior rotor magnet array arrangement is from principle predestinated for the controlled sensor less mode including standstill. Fortunately, in order to reduce costs, the distinct reluctance torque capability of such interior magnet arrangement is additionally used for a significantly increased torque by applying a pre-oriented stator current space vectors within the quasi-steady control.}, language = {en} } @inproceedings{HaumerKral, author = {Haumer, Anton and Kral, Christian}, title = {Motor Management of Permanent Magnet Synchronous Machines}, series = {Proceedings of the 9th International MODELICA Conference; September 3-5; 2012; Munich; Germany}, booktitle = {Proceedings of the 9th International MODELICA Conference; September 3-5; 2012; Munich; Germany}, editor = {Otter, Martin and Zimmer, Dirk}, publisher = {Link{\"o}ping University Electronic Press}, isbn = {978-91-7519-826-2}, issn = {1650-3686}, doi = {10.3384/ecp12076159}, pages = {159 -- 166}, abstract = {Two state-of-the-art machine designs are mainly used in recent electric and hybrid electric vehicles: asynchronous induction machines with squirrel cage which are robust but need a current component to excite the magnetic field; and permanent magnet synchronous machines which rely on somehow more sensible parts but the magnets are able to excite a magnetic field without current. However; if speed gets high enough to reach the field weakening range; for both machine the field oriented control has to prescribe a field current sufficient to reduce the field not to exceed the voltage limits of the stator circuit. Especially for the permanent magnet synchronous machine this paper investigates whether it is possible to determine an optimal field current for every operation point to minimize either total current consumption or losses.}, language = {en} } @incollection{KapellerHaumerKraletal., author = {Kapeller, Hansj{\"o}rg and Haumer, Anton and Kral, Christian and Grabner, Christian}, title = {Different Designs of Large Chipper Drives}, series = {Electronic Engineering and Computing Technology}, booktitle = {Electronic Engineering and Computing Technology}, editor = {Ao, Sio-Iong and Gelman, Len}, publisher = {Springer}, address = {Dordrecht}, isbn = {978-90-481-8775-1}, doi = {10.1007/978-90-481-8776-8_9}, pages = {93 -- 104}, abstract = {This paper presents two simulation models for two variants of a large chipper drive used in a paper mill. If a slip ring induction motor is used, the impact of a rotor circuit rheostat with respect to starting behavior and heavy duty load impulses can be examined. Furthermore a speed controlled squirrel cage induction machine will be investigated. The modeling language for both drives is Modelica. The simulation results for both drives are compared and discussed.}, language = {en} } @inproceedings{KralHaumerBogomolovetal., author = {Kral, Christian and Haumer, Anton and Bogomolov, Maxim and Lomonova, Elena}, title = {Harmonic wave model of a permanent magnet synchronous machine for modeling partial demagnetization under short circuit conditions}, series = {2012 XXth International Conference on Electrical Machines (ICEM 2012) ; Marseille, France, 2 - 5 September 2012}, booktitle = {2012 XXth International Conference on Electrical Machines (ICEM 2012) ; Marseille, France, 2 - 5 September 2012}, publisher = {IEEE}, address = {Piscataway, NJ}, isbn = {978-1-4673-0142-8}, doi = {10.1109/ICElMach.2012.6349880}, pages = {295 -- 301}, abstract = {This paper proposes a multi domain physical model of permanent magnet synchronous machines, considering electrical, magnetic, thermal and mechanical effects. For each component of the model, the main wave as well as lower and higher harmonic wave components of the magnetic flux and the magnetic potential difference may be considered. The permanent magnets are modeled as discrete azimuthal segments in order to consider possible partial demagnetization effects. For each magnet segment a linearized temperature dependent B-H curve is considered. The main advantage of the presented model is that time transient operational behavior of a permanent magnet synchronous machine can be considered under various electrical, magnetic, thermal and mechanical conditions. The electromagnetic condition of surface magnet machine is compared with finite element analysis.}, language = {en} } @inproceedings{KralHaumerWoehrnschimmel, author = {Kral, Christian and Haumer, Anton and W{\"o}hrnschimmel, Reinhard}, title = {Extension of the FundamentalWave Library towards Multi Phase Electric Machine Models}, series = {Proceedings of the 10th International Modelica Conference, March 10-12, 2014, Lund, Sweden}, booktitle = {Proceedings of the 10th International Modelica Conference, March 10-12, 2014, Lund, Sweden}, publisher = {Link{\"o}ping University Electronic Press}, isbn = {978-91-7519-380-9}, issn = {1650-3686}, doi = {10.3384/ecp14096135}, pages = {135 -- 143}, abstract = {Abstract Electric machine theory and electric machine simulations models are often limited to three phases. Up to the Modelica Standard Libray (MSL) version 3.2 the provided machine models were limited to three phases. Particularly for large industrial drives and for redundancy reasons in electric vehicles and aircrafts multi phase electric machines are demanded. In the MSL 3.2.1 an extension of the existing FundamentalWave library has been performed to cope with phase numbers greater than or equal to three. The developed machine models are fully incorporating the multi phase electric; magnetic; rotational and thermal domain. In this publication the theoretical background of the machines models; Modelica implementation details; the parametrization of the models and simulation examples are presented.}, language = {en} } @inproceedings{KralHaumerLee, author = {Kral, Christian and Haumer, Anton and Lee, Sang Bin}, title = {Robust thermal model for the estimation of rotor cage and stator winding temperatures of induction machines}, series = {2012 XXth International Conference on Electrical Machines ; Marseille, France, 02.- 05.09.2012}, booktitle = {2012 XXth International Conference on Electrical Machines ; Marseille, France, 02.- 05.09.2012}, publisher = {IEEE}, address = {Piscataway, NJ}, isbn = {978-1-4673-0142-8}, doi = {10.1109/ICElMach.2012.6350127}, pages = {1810 -- 1816}, abstract = {In this paper a new model for the estimation of the stator winding and rotor cage temperatures of induction machines is presented. This model can be used in series applications of machines operated under dynamic load conditions where stator and rotor temperature shall be monitored. The proposed model relies on a simplified lumped element thermal equivalent circuit model where the stator core temperature serves as input quantity. The great advantage of this model is that it covers ambient and cooling conditions inherently. This leads to great simplicity and robustness. The parametrization and validation of the model through experimental data is presented. Advantages, drawbacks and possible implementations are discussed.}, language = {en} } @inproceedings{KralHaumerLee, author = {Kral, Christian and Haumer, Anton and Lee, Sang Bin}, title = {Innovative thermal model for the estimation of permanent magnet and stator winding temperatures}, series = {2012 IEEE Energy Conversion Congress and Exposition (ECCE 2012) ; Raleigh, NC, USA 15.09.-20.09.2012}, booktitle = {2012 IEEE Energy Conversion Congress and Exposition (ECCE 2012) ; Raleigh, NC, USA 15.09.-20.09.2012}, publisher = {IEEE}, address = {Piscataway, NJ}, isbn = {978-1-4673-0803-8}, issn = {2329-3721}, doi = {10.1109/ECCE.2012.6342386}, pages = {2704 -- 2711}, abstract = {In this paper an innovative thermal model for the determination of the temperatures of the permanent magnets and stator windings is presented. This model relies on one temperature sensor located in the stator core of the machine. The estimated stator winding and permanent magnet temperatures are determined by a simplified thermal lumped element network model with only two time constants. Due to the structure of the model and the measured stator core temperature the proposed thermal model is very robust. Distortion of the cooling circuit are inherently sensed such that the model can be used for the online prediction of temperatures. Experimental results based on an interior permanent magnet synchronous machine are presented to validate the presented model.}, language = {en} } @inproceedings{KralHaumer, author = {Kral, Christian and Haumer, Anton}, title = {The New FundamentalWave Library for Modeling Rotating Electrical Three Phase Machines}, series = {Proceedings of the 8th International Modelica Conference; March 20th-22nd; Technical Univeristy; Dresden; Germany}, booktitle = {Proceedings of the 8th International Modelica Conference; March 20th-22nd; Technical Univeristy; Dresden; Germany}, publisher = {University Electronic Press}, address = {Link{\"o}ping}, isbn = {978-91-7393-096-3}, issn = {1650-3686}, doi = {10.3384/ecp11063170}, pages = {170 -- 179}, abstract = {This paper introduces the new FundemantalWave library which is included in the Modelica Standard Library 3.2. The presented Modelica package provides models and components of rotating electrical three phase machines. The presented electrical machine models are fully compatible with the original Machines library of the electrical domain but rely on the concept of the magnetic potential and magnetic flux fundamental waves. In this article; the connector concept; the components and electric machine models of the FundemantalWave package will be explained. Additionally; the didactic advantages and the flexibility of the proposed package in with respect to considering more enhanced and sophisticated effects will be discussed.}, language = {en} } @incollection{KralHaumerGrabner, author = {Kral, Christian and Haumer, Anton and Grabner, Christian}, title = {Determination of Consistent Induction Motor Parameters}, series = {Electronic Engineering and Computing Technology}, volume = {60}, booktitle = {Electronic Engineering and Computing Technology}, editor = {Ao, Sio-Iong and Gelman, Len}, publisher = {Springer}, address = {Dordrecht}, isbn = {978-90-481-8775-1}, doi = {10.1007/978-90-481-8776-8_7}, pages = {71 -- 80}, abstract = {From the rating plate data of an induction motor the nominal efficiency can be determined. Without detailed knowledge of equivalent circuit parameters, partial load behavior cannot be computed. Therefore, a combined calculation and estimation scheme is presented, where the consistent parameters of an equivalent circuit are elaborated, exactly matching the nominal operating point. From these parameters part load efficiencies can be determined.}, language = {en} } @incollection{KralHaumerGrabner, author = {Kral, Christian and Haumer, Anton and Grabner, Christian}, title = {Broken Rotor Bars in Squirrel Cage Induction Machines - Modeling and Simulation}, series = {Electronic Engineering and Computing Technology}, booktitle = {Electronic Engineering and Computing Technology}, editor = {Ao, Sio-Iong and Gelman, Len}, publisher = {Springer}, address = {Dordrecht}, isbn = {978-90-481-8775-1}, doi = {10.1007/978-90-481-8776-8_8}, pages = {81 -- 91}, abstract = {This paper presents a physical model of a squirrel cage induction machine with rotor topology. The machine is modeled in Modelica, an object oriented multi physical modeling system. The presented machine model is used to investigate electrical rotor asymmetries in induction machines. For the case of a single broken rotor bar a simulation model is compared with measurement results.}, language = {en} } @incollection{KralHaumer, author = {Kral, Christian and Haumer, Anton}, title = {Object Oriented Modeling of Rotating Electrical Machines}, series = {Advances in Computer Science and Engineering}, booktitle = {Advances in Computer Science and Engineering}, editor = {Schmidt, Matthias}, publisher = {IntechOpen}, isbn = {978-953-307-173-2}, doi = {10.5772/15898}, pages = {135 -- 160}, language = {en} } @inproceedings{WagnerAlAbadiBuchner, author = {Wagner, Marcus and Al-Abadi, Ali and Buchner, Stefan}, title = {A Numerical-Based Model to Determine the Resonance of the Steel Cores of Transformers}, series = {ARWtr 2022 proceedings : 2022 7th Advanced Research Workshop on Transformers (ARWtr), October (23)24-26, 2022, Baiona, Spain}, booktitle = {ARWtr 2022 proceedings : 2022 7th Advanced Research Workshop on Transformers (ARWtr), October (23)24-26, 2022, Baiona, Spain}, editor = {L{\´o}pez-Fern{\´a}ndez, Xose M.,}, publisher = {IEEE}, isbn = {978-84-09-45157-9}, doi = {https://doi.org/10.23919/ARWtr54586.2022.9959938}, pages = {36 -- 41}, abstract = {The laminated steel core of transformers is one of the main sources of the generated sound, as it is excited by different electromagnetic effects during its normal operation. If the core is excited in its eigenfrequencies, the sound generated by a transformer will increase significantly. Therefore, knowledge of the core's eigenmodes and -frequencies in an early design stage can decrease expenses by avoiding costly modifications that might be required to avoid the sound levels exceeding the specified values after the final factory acceptance test. The current study focuses on developing a core resonance model to determine the eigenmodes and -frequencies of a transformer core. The core's geometry was simplified to a connected-beam structure and a numerical-based approach was applied. The accuracy of the developed model was validated against finite element method (FEM), using ANSYS on a reference core model.}, language = {en} } @inproceedings{KoernerReindlMeieretal., author = {K{\"o}rner, Patrick and Reindl, Andrea and Meier, Hans and Niemetz, Michael}, title = {A Theoretical Comparison of Different Virtual Synchronous Generator Implementations on Inverters}, series = {2022 24th European Conference on Power Electronics and Applications (EPE'22 ECCE Europe): 05-09 September 2022, Hannover, Germany}, booktitle = {2022 24th European Conference on Power Electronics and Applications (EPE'22 ECCE Europe): 05-09 September 2022, Hannover, Germany}, publisher = {IEEE}, pages = {9}, abstract = {The goal to overcome the global climate crisis leads to a rising demand for the usage of Renewable Energy Sources (RES). Decentralized control strategies are needed to allow the integration of RES into the grid. The Virtual Synchronous Generator (VSG) is proposed as a method to add virtual inertia to the grid by emulating the rotating mass of a Synchronous Generator (SG) on the control algorithm of an inverter. This paper presents the VSG control structure as well as the mathematical description in a unified form. Due to the fact that classical droop control can be seen as a special form of the VSG, their correlation is highlighted by evaluating the steady state output characteristics of the inverter. Furthermore, a theoretical comparison between different VSG topologies, including the VISMA-Method 2 and the synchronverter, is given. In order to achieve better voltage stability, principles to add virtual impedance to the inverter's output are described.}, language = {en} } @inproceedings{LaloSailerMottoketal., author = {Lalo, Erjola and Sailer, Andreas and Mottok, J{\"u}rgen and Siemers, Christian}, title = {Overhead-Aware Schedule Synthesis for Logical Execution Time (LET) in Automotive Systems}, series = {2022 IEEE 35th International System-on-Chip Conference (SOCC): 05-08 September 2022, Belfast, United Kingdom}, booktitle = {2022 IEEE 35th International System-on-Chip Conference (SOCC): 05-08 September 2022, Belfast, United Kingdom}, publisher = {IEEE}, isbn = {978-1-6654-5985-3}, doi = {10.1109/SOCC56010.2022.9908103}, pages = {1 -- 6}, abstract = {The Logical Execution Time (LET) has recently been integrated in multi-core automotive systems to ensure timing and dataflow determinism. Although buffering mechanisms are introduced to incorporate LET semantics, they do not guarantee that tasks are executed within their LET frames. In fact, LET and buffering semantics are violated if scheduling is not designed to execute all tasks within their LET frames and in a specific order. In this paper, we describe a scheduling synthesis technique for Fixed-Priority Scheduling (FPS) to achieve resource-efficient execution of LET systems. The proposed approach considers LET semantics, scheduling overheads, and delays caused by operating system operations and provides the possibility to optimize the schedule with respect to aspects like scheduling overheads. Our performance and feasibility evaluation shows that the proposed algorithm provides results in a reasonable amount of time for models of complex industrial applications. Thus, the integration of the proposed algorithm into an automated process is of high benefit to accelerate the development of vehicle applications.}, language = {en} } @article{SternerBauer, author = {Sterner, Michael and Bauer, Franz}, title = {Power-to-X im Kontext der Energiewende und des Klimaschutzes in Deutschland}, series = {Chemie-Ingenieur-Technik}, volume = {92}, journal = {Chemie-Ingenieur-Technik}, number = {1-2}, publisher = {Wiley}, issn = {0009-286X}, doi = {10.1002/cite.201900167}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-11669}, pages = {85 -- 90}, abstract = {Um den Einfluss verschiedener Power-to-X-Verfahren auf die Transformation des deutschen Energiesystems und das Erreichen der Klimaschutzziele zu {\"u}berpr{\"u}fen, wurde ein sektor{\"u}bergreifendes Energiesystemmodel entwickelt. Die daraus gewonnenen Ergebnisse zeigen: F{\"u}r eine erfolgreiche Energiewende ist der Einsatz von Power-to-X in Zukunft unverzichtbar. Vor allem in Bereichen und Sektoren, in denen hohe Energiedichten erforderlich und nur wenig andere Optionen zur Defossilisierung vorhanden sind, werden Power-to-X-Technologien zwingend notwendig.}, subject = {Power-to-Gas}, language = {de} } @inproceedings{Rill, author = {Rill, Georg}, title = {Real-Time capable Multibody Model of dual Truck Front Axles}, series = {Proceedings of DINAME 2023 - Selected Papers of the XIX International Symposium on Dynamic Problems of Mechanics, 26 Feb - 03 Mar 2023, Piren{\´o}polis, Brazil}, booktitle = {Proceedings of DINAME 2023 - Selected Papers of the XIX International Symposium on Dynamic Problems of Mechanics, 26 Feb - 03 Mar 2023, Piren{\´o}polis, Brazil}, editor = {Fleury, Agenor de T.}, publisher = {Springer}, abstract = {Dual front steering axles are quite common in multi-axled heavy duty trucks. In standard layouts of such axle combinations, the steer motions of the wheels depend not only on the rotation of the steering wheel but also on the movements of the axles. As a consequence, the model complexity of the steering system should match with the complexity of the suspension model. The development of new technologies like advanced driver assistance systems or autonomous driving can only be accomplished efficiently using extensive simulation methods. Such kind of applications demand for computationally efficient vehicle models. This paper presents a steering system model for dual front axles of heavy duty trucks which supplements the suspension model of the axles. The model takes the torsional compliance of the steering column as well as the stiffness of the tie rods and the coupling rod into account. A quasi-static solution provides a straight forward computation including the partial derivatives required for an efficient implicit solver. The steering system model matches perfectly with comparatively lean, but sufficiently accurate multibody suspension models.}, language = {en} } @inproceedings{SteiningerGadererDawoud, author = {Steininger, Peter and Gaderer, Matthias and Dawoud, Belal}, title = {Transient performance of a solar selective thermal insulation system}, series = {16th Advanced Building Skins Conference \& Expo, 21 - 22/10/2021, Bern, Switzerland}, booktitle = {16th Advanced Building Skins Conference \& Expo, 21 - 22/10/2021, Bern, Switzerland}, publisher = {Advanced Buidling Skins GmbH}, abstract = {A prototype of a thermal insulation system to offer high selectivity of the solar gain regarding the solar incidence angle (SATIS) was applied to a typical solid brick masonry for existing buildings in Germany. Light conducting elements (LCEs) inclined at 19 ° were incorporated in SATIS, which equals the average solar noon angle in southern Germany during winter. The entire wall construction was experimentally investigated in a differential climatic chamber test bench at four different irradiation angles according to a dynamic test procedure. In addition, a conventional wall construction (CWC) has been measured. At SATIS' design angle of 19 °, the SATIS wall construction shows a solar gain (SG) of 394.5 Wh/m², while the SG of the CWC amounts to only 25.4 Wh/m². The validated transient model of the SATIS wall construction showed that, at the end of the irradiation period of the dynamic test procedure (8 h), the solar heat penetrates to a depth of 253 mm and 111 mm inside the 385 mm thick brick wall masonry at the irradiation angles of 19 ° and 50 °, respectively. During the same time, the stored solar energy at 50 ° amounts to only 24.4 \% of that stored at 19 °.}, language = {en} } @article{DePremekMottok, author = {De, Sangita and Premek, Brada and Mottok, J{\"u}rgen}, title = {Derivation of Optimized Threshold of Semantic Alignment Metrics for Intepretation of Interoperability and Reusability of Cross-enterprise Vehicle Service Interface Models}, series = {Informatica}, volume = {47}, journal = {Informatica}, number = {7}, publisher = {Slovenian Society Informatika}, issn = {0350-5596}, doi = {10.31449/inf.v47i7.4739}, abstract = {Over the past decade, cars have turned gradually into real cyber physical systems. The collaboration of services between the service-oriented, cross-enterprise vehicle application frameworks has increased to generate novel, smart and complicated vehicle services. Consequently, from an interoperability perspective, semantically mapping of vehicle service component's interface ontological models emerged as a big research interest in automotive application domain that manipulates several cross-enterprise synergy knowledge applications frameworks. The ontological metamodeling lays the foundation for building semantic bridge and exploring semantic associations between service components' interface models based on the domain knowledge for semantic interoperability. Also, several semantic quality metrics has been defined over time for the vehicle service interface ontological metamodels. The empirically evaluated values of these metrics can be used to assess progress in cross-enterprise interoperability between the service and the clients' APIs ontological models in vehicle domain. Despite potential benefits of semantic alignment quality metrics, the effective use of these metrics for vehicle service interface ontologies have proven elusive. Yes, such metrics can be used successfully for quantification, but then they mostly fail to provide adequate annotations in subsequent decision-making in the direction of semantic interoperability and reusability. The effective use of ontology semantic alignment quality metrics is basically hindered in the absence of the meaningful thresholds. In fact, the absence of an effective and meaningful threshold for the semantic similarity measure between various vehicle service interface ontological metamodels, motivates this research work which not only proposes a design approach to an optimized threshold for the semantic similarity metrics but also applies this threshold on few defined semantic alignment quality metrics. This paper also uses a real-world vehicle domain industrial case study to illustrate the design approach.}, language = {en} }