@inproceedings{HofmannScharfenberg, author = {Hofmann, Gerhard and Scharfenberg, Georg}, title = {{\"U}berlegungen zur normativen Anpassung der ISO 26262 aufgrund des autonomen Fahrens}, series = {Automotive Software Kongress, 2015}, booktitle = {Automotive Software Kongress, 2015}, publisher = {WEKA Fachmedien}, address = {Haar}, pages = {1 -- 6}, abstract = {In der Automobilindustrie ist neben der Elektromobilit{\"a}t und dem Leichtbau auch das Gebiet der Fahrerassistenz ein Zukunftsfeld. Speziell Fahrerassistenzsysteme, wie z.B. der Stauassistent, sind in Hinblick auf das autonome Fahren als dessen Vorstufe zu sehen. Aktuelle Assistenzfunktionen basieren auf der Pr{\"a}senz des Fahrers. Die Fahrerassistenzsysteme sind nur durch Funktionen der Elektrik/Elektronik erm{\"o}glicht worden. Durch Maßnahmen der "Funktionalen Sicherheit" m{\"u}ssen Risiken, die durch Fehler der Elektrik/Elektronik zu Gefahren f{\"u}hren k{\"o}nnten, unter eine akzeptierte Grenze gesenkt werden. Die Diskussion {\"u}ber die gesetzlichen Grundlagen f{\"u}r das autonome Fahren ist erst am Anfang des {\"o}ffentlichen Interesses. In diesem Zusammenhang ist es sinnvoll, die Notwendigkeit der Anpassung der bestehenden normativen Anforderungen zur funktionalen Sicherheit in die Diskussion mit einzubeziehen. Im ersten Ansatz wird in diesem Paper untersucht, ob von anderen Anwendungen mit automatisiertem Fahrbetrieb, wie er bei Schienenfahrzeugen realisiert ist, Ableitungen m{\"o}glich sind. Im zweiten Ansatzpunkt wird konkret unter dem Gesichtspunkt des autonomen Fahrens zum Automobil auf die Gefahren-und Risikoanalyse, gem{\"a}ß ISO 26262 Teil 3 eingegangen. Im Rahmen dieser Diskussion werden die drei Bewertungskriterien der Gefahren- und Risikoanalyse (severity, probability of exposure and controllability) im Paper beleuchtet. Es wird gezeigt, dass f{\"u}r autonomes Fahren ein zus{\"a}tzliches Bewertungskriterium der Situationskomplexit{\"a}t sinnvoll ist, das das Umfeld einbezieht. Denn die Kontrollierbarkeit ist auf den Fahrer bezogen. Bei dem neuen Kriterium werden unter anderem der Einfluss durch die Verkehrsdichte sowie die Car-2-Car Kommunikation oder auch Fehler bzw. Ausf{\"a}lle in der Car-2-X Kommunikation (zur Infrastruktur) ber{\"u}cksichtigt.}, language = {de} } @inproceedings{KasparRabl, author = {Kaspar, Marcel and Rabl, Hans-Peter}, title = {Differenzierte Kohlenwasserstoffanalytik im Dieselabgas bei verschiedenen Motorbetriebszust{\"a}nden}, series = {12. FAD-Konferenz „Herausforderung - Agbasnachbehandlung f{\"u}r Dieselmotoren", 12, 2014, Dresden}, booktitle = {12. FAD-Konferenz „Herausforderung - Agbasnachbehandlung f{\"u}r Dieselmotoren", 12, 2014, Dresden}, publisher = {F{\"o}rderkreis Abgasnachbehandlungstechnologien f{\"u}r Verbrennungskraftmaschinen (FAD) e.V.}, pages = {45 -- 59}, abstract = {Die f{\"u}r Dieselfahrzeuge gesetzlich vorgeschriebenen Grenzwerte bez{\"u}glich der Schadstoffkomponenten Kohlenwasserstoffe und Kohlenmonoxid k{\"o}nnen nur durch den Einsatz eines Diesel-Oxidationskatalysators erf{\"u}llt werden. Um erh{\"o}hte Emissionen infolge eines gesch{\"a}digten Katalysators zu vermeiden, gilt es, dieses abgasrelevante Bauteil auch w{\"a}hrend des Betriebes zu {\"u}berwachen. Die zuk{\"u}nftigen gesetzlichen Anforderungen an die {\"U}berwachung erfordern ein Verfahren das eine zuverl{\"a}ssige und hochgenaue Diagnose zul{\"a}sst. Deshalb entwickelt eine Forschungsgemeinschaft aus Industrieunternehmen und Hochschulen einen neuartigen Kohlenwasserstoffsensor zur hochgenauen Analyse von unverbrannten Kohlenwasserstoffen im Abgasstrang. Hierf{\"u}r ist die Kohlenwasserstoffzusammensetzung des Dieselabgases bei verschiedenen Motorbetriebszust{\"a}nden zu ermitteln. Zur differenzierten Untersuchung der Kohlenwasserstoffkomponenten wurde in der Arbeit ein Massenspektrometer eingesetzt, das mit chemischer Ionisation arbeitet. Anhand eines Abgasscreenings konnte eine Reihe von Kohlenwasserstoffen (Alkane, Alkene, Alkine, Alkadiene und aromatische Kohlenwasserstoffe) identifiziert werden, die typisch f{\"u}r das Dieselabgas stehen. Die Molek{\"u}le Ethin, Ethen und Propen wurden gezielt betrachtet. Die Ergebnisse zeigen, dass bei kalten Betriebsbedingungen diese drei Komponenten etwa die H{\"a}lfte der Gesamtkohlenwasserstoffkonzentration ergeben. Ein weiterer Punkt der Untersuchungen war die Diesel-Partikelfilter-Regeneration. Wie erwartet, lassen sich Kohlenwasserstoffmolek{\"u}le mit h{\"o}heren Massen feststellen, die auf unverbrannten Dieselkraftstoff zur{\"u}ckzuf{\"u}hren sind. Anhand der Ergebnisse zeigte sich.dass sich das mit chemischer Ionisation arbeitende Massenspektrometer hervorragend f{\"u}r ein Abgasscreening eignet. Zahlreiche Kohlenwasserstoffe konnten identifiziert werden, die repr{\"a}sentativ f{\"u}r das Dieselabgas stehen. Es sollten Molek{\"u}le bei verschiedenen Motorbetriebsbedingungen untersucht werden, die einen m{\"o}glichst großen Anteil an der Gesamtkohlenwasserstoffkonzentration besitzen. Die Auswahl fiel aufgrund der gemessenen Massenspektren, vor und nach dem Diesel-Oxidationskatalysator, auf die Komponenten Ethin, Ethen und Propen. Zudem kann bei diesen Molek{\"u}len eine Masseninterferenz mit anderen Abgaskomponenten ausgeschlossen werden. Im unteren Teillastbereich und kaltem Motor machen diese Kohlenwasserstoffe bis zu 50\%, gemittelt {\"u}ber alle Messstellen vor, im und nach dem Diesel-Oxidationskatalysator, der Gesamtkohlenwasserstoffkonzentration aus. Bei betriebswarmem Motor reduziert sich ihr Anteil auf ein Drittel Die h{\"o}chste Konzentration unter den drei Komponenten besitzt dabei Propen. Mit steigendem Drehmoment nimmt der Anteil dieser drei Komponenten fortlaufend ab,was daf{\"u}r spricht, dass Molek{\"u}le mit h{\"o}heren Massen einen h{\"o}heren Anteil einnehmen. Die Kohlenwasserstoff-Emissionen bewegen sich bei diesen Motorbetriebspunkten mit betriebswarmem Katalysator jedoch bereits bei sehr niedrigen Werten. W{\"a}hrend der untersuchten Diesel-Partikelfilter-Regeneration mit sp{\"a}ten Nacheinspritzungen zur Abgastemperaturerh{\"o}hung lassen sich Molek{\"u}le mit h{\"o}heren Massen nachweisen. Diese sind typisch f{\"u}r die Reinkomponente Dieselkraftstoff. Der Anteil von Ethin, Ethen und Propen an der THC-Konzentration betr{\"a}gt dann ca. 40\%.}, language = {de} } @inproceedings{MilaevRuiderSchlegl, author = {Milaev, Johannes and Ruider, Martin and Schlegl, Thomas}, title = {Entwicklung eines Experimentalsystems zur Validierung adaptiver Regelungen mit einem OEM-Steuerger{\"a}t}, series = {Tagungsband AALE 2014 : das Forum f{\"u}r Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 11. Fachkonferenz, Regensburg}, booktitle = {Tagungsband AALE 2014 : das Forum f{\"u}r Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 11. Fachkonferenz, Regensburg}, publisher = {Deutscher Industrieverlag}, address = {M{\"u}nchen}, isbn = {978-3-8356-7142-3}, pages = {241 -- 250}, abstract = {Im Rahmen des Kooperationsprojektes "ACES" (Integrated Adaption of Linear Controllers for Embedded Systems) ist ein Pr{\"u}fstand zur Validierung adaptiver Regelungen entwickelt und aufgebaut worden, der das dynamische Verhalten eines Kfz-Antriebstrangs aufweist. Ziel ist es, verschiedene Adaptionsverfahren auf ihre Einsetzbarkeit in OEM-Steuerger{\"a}ten, die im Automotive-Bereich auf breiter Basis verwendet werden, kosteng{\"u}nstig testen zu k{\"o}nnen. Das Problem der aktiven Schwingungsd{\"a}mpfung in Kfz-Antriebsstr{\"a}ngen mit unbekannten und ver{\"a}nderlichen mechanischen Parametern stellt eine Pilotanwendung dar. Ein leicht anpassbarer mechanischer Pr{\"u}fstand dient hierbei als vereinfachtes Modell eines Antriebstrangs. Dieser ist Bestandteil eitles Experimentalsystems mit einer informationstechnischen Architektur, die einen Betrieb engebetteter Regelungssysteme auf verschiedenen Plattformen gestattet. Das flexible mechanische und informationstechnische Design des Experimentalsystems gestattet die Variation von Parametern der zu regelnden Applikation durch leicht austauschbare mechanische Komponenten und gezielte Einbringung von St{\"o}rgr{\"o}ßen. Zudem kann die Berechnung der Regelungsarchitektur auf einem Industrie-PC oder einem Steuerger{\"a}t erfolgen. Weitere Vorteile des entwickelten Experimentalsystems sind die Ber{\"u}cksichtigung von Effekten, die aus dem Verhalten realer Sensoren und der CAN-basierten Signal{\"u}bertragung entstehen. Insbesondere der Einfluss von Wortbreite und Latenz {\"u}bertragener Signale auf die Adaption von Regelungen kann mit Hilfe des vorgestellten Experimentalsystems eingehend untersucht werden.}, language = {de} } @inproceedings{KetterlHeinrichReitmeieretal., author = {Ketterl, Hermann and Heinrich, Tobias and Reitmeier, Torsten and Hoelscher, Clemens}, title = {Emissionsabh{\"a}ngige Leistungsregelung f{\"u}r BHKW's}, series = {Tagungsband AALE 2020: Automatisierung und Mensch-Technik-Interaktion, 17. Fachkonferenz, 4. bis 6. M{\"a}rz 2020, Leipzig}, volume = {2020}, booktitle = {Tagungsband AALE 2020: Automatisierung und Mensch-Technik-Interaktion, 17. Fachkonferenz, 4. bis 6. M{\"a}rz 2020, Leipzig}, editor = {J{\"a}kel, Jens and Thiel, Robert}, publisher = {VDE-Verlag}, isbn = {978-3-8007-5180-8}, pages = {7}, language = {de} } @article{Roesel, author = {R{\"o}sel, Birgit}, title = {Just-in-Time Teaching f{\"u}r einen Grundkurs Regelungstechnik - Ergebnisse und Auswirkungen der Profistufe des Zertifikats Hochschullehre}, series = {Didaktiknachrichten}, journal = {Didaktiknachrichten}, number = {06}, publisher = {Zentrum f{\"u}r Hochschuldidaktik (DiZ)}, pages = {66 -- 71}, language = {de} } @article{EmbergerAltmannGebhardetal., author = {Emberger, Peter and Altmann, Robert and Gebhard, J{\"u}rgen and Thuneke, Klaus and Winkler, Markus and T{\"o}pfer, Georg and Rabl, Hans-Peter and Remmele, Edgar}, title = {Combustion characteristics of pure rapeseed oil fuel after injection in a constant volume combustion chamber with a non-road mobile machinery engine solenoid injector}, series = {Fuel}, journal = {Fuel}, number = {320}, publisher = {Elsevier}, doi = {10.1016/j.fuel.2022.123979}, abstract = {Pure rapeseed oil fuel (R100) according to standard DIN 51605 is a greenhouse gas saving option for the mobility sector. With its high energy density close to diesel fuel, R100 is suitable to operate non-road mobile machinery with a high power demand and long operating time, where electric drives reach their limits. Advantages are indicated for its use in environmentally sensitive areas like agriculture since R100 is highly biodegradable and non-toxic. However, R100 is characterised by differing physical and chemical properties compared to diesel. The objective of the research is to investigate the differences in the ignition and combustion behaviour of R100 compared to diesel fuel (DF). For this purpose, a constant volume combustion chamber is used, which is equipped with a modern solenoid injector for engines of non-road mobile machinery. The researched injector shows a different hydraulic behaviour when using R100 compared to DF in that the injected fuel mass is lower with R100 than with DF. In combination with the 14 \% by mass lower calorific value, less energy output is determined with R100. When varying the injection pressure, the impact on the ignition delay and combustion behaviour is much higher for R100 than for DF. Specifically, an increase of the injection pressure supports mixture preparation and thus partially compensates the differing physical properties of R100. The results of ignition delay measurements and net heat release analysis are as follows: At low load conditions with low injection pressure as well as a low combustion chamber temperature and pressure, R100 ignites later and shows a further delayed combustion compared to diesel. The opposite is observed for medium and high load conditions, where R100 ignites faster and without delayed combustion in comparison to DF. Thus, an adjustment of the heat release of R100 at the same level as for DF is possible by modifying the injection strategy. The research shows that for an optimised combustion of R100 the injection settings must be adjusted for every operation point separately. The results indicate how the injection parameters should be adjusted for different load conditions to realise a high-quality engine calibration for R100.}, language = {en} } @incollection{MuehlbauerRablRottengruber, author = {M{\"u}hlbauer, Christian and Rabl, Hans-Peter and Rottengruber, Hermann}, title = {Acoustic Optimization of Mechatronic Direct Injection Systems and Analysis of the Effects on Robustness in System Operation}, series = {SAE International Journal of Advances and Current Practices in Mobility}, volume = {4}, booktitle = {SAE International Journal of Advances and Current Practices in Mobility}, number = {1}, publisher = {SAE International, Warrendale, PA, United States}, issn = {2641-9645}, doi = {10.4271/2021-01-0671}, pages = {68 -- 77}, abstract = {The tightening of the emission legislation and political and social demands for sustainable mobility are forcing the automotive industry to develop complex, high precision mechatronic drive systems. The increasing precision of mechatronic components generally leads to an increase in structural excitation and thus to a rise in noise. The so-called ticking of the fuel injection system has a rather low sound pressure level compared to the residual engine noise. Nevertheless, the impulsive and high frequency noise character leads to a decline concerning the perception of comfort and sound quality. In order to identify the sound quality of fuel injection systems as a frontloading measure, a system test bench has been developed which represents the structure-borne and airborne sound radiation of the stand-alone injection system in a close to series configuration. In this paper, measures for the acoustic optimization of injection systems and their effects on the robustness of the system are discussed. The focus is on engine idling, since at this operating point the ticking of the injectors and high-pressure pump can be perceived most clearly due to the low masking effects of other noise sources. For this purpose, the injection parameters were measured during full engine operation and transferred to the system test bench. By using a special development control unit, it was possible to modify the parameters, quantify their influence on the acoustic behavior and, based on this, define NVH optimized control strategies. For the robustness evaluation of the NVH optimized control strategies, key functions of the injection system were analyzed under varying boundary conditions in system operation on an injection rate test bench.}, language = {en} } @misc{SchwanzerMieslingerRabletal., author = {Schwanzer, Peter and Mieslinger, Johann and Rabl, Hans-Peter and Dietrich, Markus and Haft, Gerhard and Walter, Stefanie and Hagen, Gunter and Moos, Ralf and Gaderer, Matthias}, title = {Monitoring of a Particulate Filter for Gasoline Direct Injection Engines with a Radio-Frequency-Sensor}, series = {11th International Exhaust Gas and Particulate Emissions Forum, 3.-4.3.2020, Ludwigsburg, Germany}, journal = {11th International Exhaust Gas and Particulate Emissions Forum, 3.-4.3.2020, Ludwigsburg, Germany}, abstract = {In order to comply with future emission regulations, the use of particulate filters in vehicles with direct injection gasoline engines is essential. The current amount of soot and ash in the filter is calculated by a soot load model in the electronic control unit in combination with a differential pressure sensor determining the pressure drop over the particulate filter. Active regeneration is initiated if the calculated amount of soot or the measured differential pressure is too high. This is associated with additional fuel consumption. An on-board diagnosis for the particulate filter is currently not part of the Euro 6d emission standard. For future exhaust emission standards, on-board diagnosis or active monitoring of the particulate filter is conceivable. One of the benefits of monitoring is the fact that unnecessary active regenerations can be avoided. As a result, there is no additional fuel consumption due to misinterpretations of the amount of soot in the filter. For active monitoring of the particulate filter, a radiofrequency (RF-) sensor, that detects the soot loading of the filter with electromagnetic waves directly, can be used. Such a system has the advantage that by utilizing the filter as a sensor more precise information about the current state of the filter, e.g. a possible damage, can be provided. Worst-case considerations of filter damages, tested at an engine test bench show the advantages which are entailed by a system like that. By means of partial regeneration of the particulate filter it is demonstrated how the remaining amount of soot in the filter can be detected in a better way in comparison to the differential pressure sensor by using the RF-sensor.}, language = {en} } @article{BrockKoderRabletal., author = {Brock, Damian and Koder, Alexander and Rabl, Hans-Peter and Touraud, Didier and Kunz, Werner}, title = {Optimising the biodiesel production process: Implementation of glycerol derivatives into biofuel formulations and their potential to form hydrofuels}, series = {Fuel}, volume = {264}, journal = {Fuel}, number = {March}, publisher = {Elsevier}, doi = {10.1016/j.fuel.2019.116695}, abstract = {A new biofuel concept is developed, enabling the usage of vegetable oils and glycerol derivatives in mixtures with biodiesel. This concept significantly enhances the biodiesel production's profitability and thus strongly contributes to the sustainability of future biofuels. After simple addition reactions with building block chemicals, less hydrophilic glycerol derivatives are obtained, which are compatible with biofuels. Even more, the products of the reactions of glycerol with acetone or butyric acid, referred to as solketal and tributyrin, respectively, lead to promising biofuels in mixtures with rapeseed oil and its biodiesel. Due to their low freezing points, they act as cloud and freezing point depressants, when added to vegetable oil/biodiesel blends. Further, since their viscosity is close to common biodiesel, biofuels containing high amounts of vegetable oil and even more glycerol derivatives than they arise during the biodiesel production can be obtained. Thus, this new class of biofuels enables adaptable compositions depending on the application and also the usage as drop-in fuel without any or just few percent of further additives. After optimising the formulations, ignition delay, exhaust gas recirculation, fuel consumption and combustion process measurements were performed in an unmodified upto-date diesel engine. The experiments showed that the properties of the formulated biofuels are either similar to or even better than diesel. The hydrotropy of the glycerol derivatives in these mixtures enables the potential to implement water into biofuels, so-called hydrofuels, reducing nitrogen oxide emissions and leading to further optimised dropin fuels.}, language = {en} } @incollection{WalterSchwanzerHagenetal., author = {Walter, Stefanie and Schwanzer, Peter and Hagen, Gunter and Haft, Gerhard and Dietrich, Markus and Rabl, Hans-Peter and Moos, Ralf}, title = {Hochfrequenzsensorik zur direkten Beladungserkennung von Benzinpartikelfiltern}, series = {Automobil-Sensorik 3}, booktitle = {Automobil-Sensorik 3}, editor = {Tille, Thomas}, publisher = {Springer Vieweg}, address = {Berlin}, isbn = {978-3-662-61259-0}, doi = {10.1007/978-3-662-61260-6_7}, pages = {185 -- 208}, abstract = {In Folge der Versch{\"a}rfung der gesetzlichen Abgasnormen wurden f{\"u}r direkt-einspritzende Benzinmotoren Partikelfilter notwendig. Zur Beladungs{\"u}berwachung k{\"o}nnen aufgrund stark unterschiedlicher Rahmenbedingungen die aus Dieselmotoren bekannten Systeme, wie dem Differenzdrucksensor, nur eingeschr{\"a}nkt {\"u}bernommen werden. Ein hochfrequenzbasiertes Verfahren koppelt mittels Antennen elektromagnetische Wellen in das Filtergeh{\"a}use ein, deren Ausbreitungsverhalten durch die dielektrischen Eigenschaften des eingelagerten Rußes beeinflusst wird. Hierdurch kann bei Auswertung von Transmissionsd{\"a}mpfung oder Resonanzfrequenzen die Rußbeladung direkt detektiert werden.}, language = {en} } @inproceedings{GrothmannPoelsterlGerling, author = {Grothmann, Benjamin and Poelsterl, Thomas and Gerling, Dieter}, title = {Online compensation of current sensor gain-faults for safety-relevant IPM-drives}, series = {2017 IEEE Transportation Electrification Conference and Expo (ITEC), 22-24 June 2017, Chicago, IL, USA}, booktitle = {2017 IEEE Transportation Electrification Conference and Expo (ITEC), 22-24 June 2017, Chicago, IL, USA}, publisher = {IEEE}, doi = {10.1109/ITEC.2017.7993355}, pages = {701 -- 706}, abstract = {Detection and compensation of current sensor gain-faults regardless of the operating-point is a crucial aspect for safety-relevant servo-drives. This paper presents and investigates a new direct phase-gain re-balancing methodology, especially suited for interior permanent magnet machine (IPM) drives mostly operating at low speed-ranges including standstill. The proposed model-based approach utilizes high-frequency signal-injection (HFI) to facilitate fast and persistent sensor monitoring for any operating state of the drive. No additional sensing hardware is required. Extraction of the HFI-phase-current response enables detection and immediate compensation of sensor gain-faults. Implementation aspects of the proposed concept are discussed thoroughly. Experimental results are presented to prove and investigate robustness, reliability and fault-tolerant performance.}, language = {en} } @inproceedings{SchmidtFuchsFuchs, author = {Schmidt, Hans-Peter and Fuchs, Andreas and Fuchs, Stefan}, title = {Simultaneous contact less charging of multiple electric vehicles: Contact less power and data transfer for multiple distributed loads}, series = {2014 4th International Electric Drives Production Conference ( 30 Sept.-1 Oct. 2014, Nuremberg, Germany}, booktitle = {2014 4th International Electric Drives Production Conference ( 30 Sept.-1 Oct. 2014, Nuremberg, Germany}, publisher = {IEEE}, doi = {10.1109/EDPC.2014.6984435}, pages = {1 -- 3}, abstract = {A design of a 3-phase inductive power and data transfer for multiple stationary loads is proposed. It focuses on stable load voltages while minimizing electromagnetic interference. Loads are contactless charging units of electric vehicles at car parks. Physical properties of the inductive couplers are modelled via 3-D FEM and lumped parameters are used for system studies. Design principles are verified at laboratory scale with a purpose built test stand.}, language = {en} } @inproceedings{SchorrBoehmZentneretal., author = {Schorr, Philipp and B{\"o}hm, Valter and Zentner, Lena and Zimmermann, Klaus}, title = {Dynamical Investigation of Crawling Motion System based on a Multistable Tensegrity Structure}, series = {Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics : Porto, Portugal, 29.07.2018 - 31.07.2018}, booktitle = {Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics : Porto, Portugal, 29.07.2018 - 31.07.2018}, publisher = {SCITEPRESS}, isbn = {978-989-758-321-6}, doi = {10.5220/0006852701220130}, pages = {122 -- 130}, abstract = {The basic idea of this article is the utilization of the multistable character of a compliant tensegrity structure to control the direction of motion of a crawling motion system. A crawling motion system basing on a two-dimensional tensegrity structure with multiple stable equilibrium states is considered. This system is in contact with a horizontal plane due to gravity. For a selected harmonic actuation of the system small oscillations around the given equilibrium state of the tensegrity structure occur and the corresponding uniaxial motion of the system is evaluated. A change of the equilibrium state of the tensegrity structure yields to novel configuration of the entire system. Moreover, the motion behavior of the novel configuration is totally different although the actuation strategy is not varied. In particular, the direction of motion changes. Therefore, this approach enables a uniaxial bidirectional crawling motion with a controllable direction of motion using only one actuat or with a selected excitation frequency.}, language = {en} } @inproceedings{HofmannScharfenberg, author = {Hofmann, Gerhard and Scharfenberg, Georg}, title = {Applicability of the ISO 26262 for functional safety for motorbikes}, series = {2014 International Conference on Applied Electronics, 9-10 Sept. 2014, Pilsen, Czech Republic}, booktitle = {2014 International Conference on Applied Electronics, 9-10 Sept. 2014, Pilsen, Czech Republic}, publisher = {IEEE}, doi = {10.1109/AE.2014.7011679}, pages = {107 -- 112}, abstract = {This article deals with the question to what extent the automotive standard for functional safety ISO 26262 is also applicable to motorbikes. It examines thereby, on the one hand where to find comparable criteria between cars and motorbikes from the standpoint of functional safety, and, on the other hand, where differences between the automobile and the motorbike must be considered. It shows the extent to which the safety-related automotive standard is applicable to motorbikes. Furthermore, the differences are determined, which must lead to the consequence of a new "state of the art" and to a new standard for motorbikes. On the example of a light function the new MSIL classification gets applied. In this article, the motorbike is viewed as a whole. For the most parts the standard is also valid for scooters.}, language = {en} } @inproceedings{HaumerKral, author = {Haumer, Anton and Kral, Christian}, title = {Enhancements of Electric Machine Models: The EMachines Library}, series = {Proceedings of the 11th International Modelica Conference, Versailles, France, September 21-23, 2015}, volume = {118}, booktitle = {Proceedings of the 11th International Modelica Conference, Versailles, France, September 21-23, 2015}, publisher = {Link{\"o}ping University Electronic Press}, doi = {10.3384/ecp15118509}, pages = {509 -- 515}, abstract = {Transient models of multi phase electric machines are already implemented in the Modelica Standard Library (MSL). However, advanced effects like saturation and skin effect are not taken into account. As an extension to the MSL models, the new EMachines library is presented. This package will be released as a supplemental library to the commercial EDrives library. The particular focus of this paper is on the deep bar effect of induction machines. A comparison of simulation results demonstrates the influence of the skin effect on the operational behavior of the machines. At the end of this publication further developments of the EMachines library will be outlined.}, language = {en} } @inproceedings{BeckeSchlegl, author = {Becke, Mark and Schlegl, Thomas}, title = {Least squares pose estimation of cylinder axes from multiple views using contour line features}, series = {IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, 9-12 Nov. 2015, Yokohama, Japan}, booktitle = {IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, 9-12 Nov. 2015, Yokohama, Japan}, publisher = {IEEE}, doi = {10.1109/IECON.2015.7392371}, pages = {1855 -- 1861}, abstract = {In this paper, a new method for a minimum-error pose estimation of cylinder axes based on apparent contour line features from multiple views is presented. Novel model equations for both single and particularly multiple views are derived, and based upon these, an iterative algorithm for least squares fitting the model to imaged cylinder contour line features is introduced. The good performance and fast convergence of the proposed algorithm is shown by solving exemplary fitting problems.}, language = {en} } @inproceedings{RoeselKoehler, author = {R{\"o}sel, Birgit and K{\"o}hler, Thomas}, title = {First results of a new digitalized concept for teaching control theory as minor subject at a university of applied science}, series = {2018 IEEE Global Engineering Education Conference (EDUCON), 17-20 April 2018, Santa Cruz de Tenerife, Spain}, booktitle = {2018 IEEE Global Engineering Education Conference (EDUCON), 17-20 April 2018, Santa Cruz de Tenerife, Spain}, publisher = {IEEE}, doi = {10.1109/EDUCON.2018.8363217}, pages = {118 -- 125}, abstract = {This paper presents a digitalized concept for teaching control theory as minor subject with an integrated approach for lectures, exercises and practical sessions and first results of the implementation at the department of electrical engineering at the OTH Regensburg. The concept uses activating methods like blended learning and possibilities of digitalization of teaching implementing Just in Time Teaching and Peer Instruction. The base of the new concept is the idea of constructive alignment. Furthermore this paper presents the feedback of the students along with an accompanying scientific research over several semesters. The data obtained from the presented module are compared with the data from other blended learning approaches in Germany.}, language = {en} } @inproceedings{Schiek, author = {Schiek, Roland}, title = {Self-phase modulation in lithium niobate waveguides}, series = {2014 International Conference Laser Optics, title=Self-phase modulation in lithium niobate waveguides, 30 June-4 July 2014, St. Petersburg, Russia}, booktitle = {2014 International Conference Laser Optics, title=Self-phase modulation in lithium niobate waveguides, 30 June-4 July 2014, St. Petersburg, Russia}, publisher = {IEEE}, doi = {10.1109/LO.2014.6886403}, abstract = {Self-phase modulation in lithium niobate wave-guides with cascaded quadratic and cubic nonlinearities is characterized by comparison of amplitude and phase of input and output pulse envelopes and spectra. Cubic nonlinear susceptibility coefficients of lithium niobate were determined from the measured nonlinear phase shifts.}, language = {en} } @inproceedings{DessortChucholowskiRill, author = {Dessort, Ronnie and Chucholowski, Cornelius and Rill, Georg}, title = {Parametrical approach for modeling of tire forces and torques in TMeasy 5}, series = {16. Internationales Stuttgarter Symposium, Automobil- und Motorentechnik, Bd. 1}, booktitle = {16. Internationales Stuttgarter Symposium, Automobil- und Motorentechnik, Bd. 1}, editor = {Bargende, Michael and Reuss, Hans-Christian and Wiedemann, Jochen}, publisher = {Springer}, address = {Wiesbaden}, isbn = {978-3-658-13254-5}, doi = {10.1007/978-3-658-13255-2_31}, pages = {435 -- 449}, abstract = {For the dynamic simulation of on-road vehicles, the model-element "tire/road" is of special importance, according to its influence on the achievable results. Sufficient description of the interaction between tire and road is one of the most challenging tasks of vehicle modeling. Two groups of tire models can be classified: handling models and structural or high-frequency models. Usually, various assumptions are made in modeling vehicles as multibody systems. Therefore, in the interest of balanced modeling, the precision of the complete vehicle model should stand in reasonable relation to the performance of the applied tire model. Handling tire models are characterized by a useful compromise between user friendliness, model complexity, and efficiency in computation time on the one hand, and precision in representation on the other hand.}, language = {en} } @inproceedings{HacklHirschbergLexetal., author = {Hackl, Andreas and Hirschberg, Wolfgang and Lex, Cornelia and Rill, Georg}, title = {Parameterization Process of the Maxwell Model to Describe the Transient Force Behavior of a Tire}, series = {WCX 17: SAE World Congress Experience 2017}, booktitle = {WCX 17: SAE World Congress Experience 2017}, publisher = {SAE}, doi = {10.4271/2017-01-1505}, abstract = {The present technical article deals with the modeling of dynamic tire forces, which are relevant during interactions of safety relevant Advanced Driver Assistance Systems (ADAS). Special attention has been paid on simple but effective tire modeling of semi-physical type. In previous investigations, experimental validation showed that the well-known first-order Kelvin-Voigt model, described by a spring and damper element, describes good suitability around fixed operation points, but is limited for a wide working range. When aiming to run vehicle dynamics models within a frequency band of excitation up to 8 Hz, these models deliver remarkable deviations from measured tire characteristics. To overcome this limitation, a nonlinear Maxwell spring-damper element was introduced which is qualified to model the dynamic hardening of the elastomer materials of the tire. However, the advantage of a more realistic description of the transient behavior leads to a more complex parametrization process. Therefore, in the proposed article attention is paid to describe the identification process including defined maneuvers to parameterize the tire model, where the accuracy of the parameter strongly depends on the quality of the available input data from measurement. In order to study this important aspect of parameterization, the reference data from simulation of the full physical tire model FTire is applied like a "virtual measurement" of specified testing maneuvers. The procedure of simulation by means of the enhanced first order dynamics model is implemented by the semi-physical tire model TMeasy. Finally, the improvements of the extended model are discussed and an outlook for future work is given.}, language = {en} }