@inproceedings{NonnKalwa, author = {Nonn, Aida and Kalwa, Christoph}, title = {Simulation of ductile crack propagation in high-strength pipeline steel using damage models}, series = {9th International Pipeline Conference 2012 (IPC 2012), Calgary, Canada}, booktitle = {9th International Pipeline Conference 2012 (IPC 2012), Calgary, Canada}, doi = {10.1115/IPC2012-90653}, pages = {7}, abstract = {The performance of engineering design of high-strength steel pipelines has revealed the necessity to revise current design procedures. Therefore, an improved and detailed comprehension of fracture mechanisms and development of failure prediction tools are required in order to derive new design criteria. In last decades the most successful failure prediction tools for steel structures subjected to various type of loading can be encountered in the field of damage mechanics. This paper aims to describe ductile fracture behavior of high-strength steel pipelines by applying three different damage models, Gurson-Tvergaard-Needelman (GTN), Fracture Locus Curve (FLC) and Cohesive Zone (CZ). These models are evaluated regarding their capability to estimate ductile crack propagation in laboratory specimens and linepipe components without adjusting the calibrated parameters. It can be shown that appropriate parameter sets can be identified to reproduce load-deformation and fracture resistance curves accurately. The strain rate effect on the fracture behavior is examined by dynamic tests on the BDWT specimens. Finally, the shortcomings of the applied models are pointed out with the reference to possible extensions and modifications.}, language = {en} } @inproceedings{VoellingNonnSchneider, author = {V{\"o}lling, Alexander and Nonn, Aida and Schneider, Ingo}, title = {Anwendung des Koh{\"a}sivzonenmodells zur Abbildung von duktilem dynamischen Rissfortschritt in Gasfernleitungen}, series = {45. Tagung des AK Bruch, Berlin, Germany}, booktitle = {45. Tagung des AK Bruch, Berlin, Germany}, pages = {253 -- 262}, subject = {Ferngasleitung}, language = {de} } @inproceedings{NonnWesselSchmidt, author = {Nonn, Aida and Wessel, Waldemar and Schmidt, Tanja}, title = {Application of finite element analysis for assessment of fracture behavior of modern high toughness seamless pipeline steels}, series = {23rd International Society of Offshore and Polar Engineering 2013 (ISOPE 2013), Anchorage, USA}, booktitle = {23rd International Society of Offshore and Polar Engineering 2013 (ISOPE 2013), Anchorage, USA}, doi = {10.13140/2.1.4239.2322}, abstract = {Fracture behavior of seamless pipeline material X65Q acc. to API 5L has been studied both experimentally and numerically at different loading conditions (quasi-static vs. dynamic) and temperatures. The recent findings have shown difficulties in applying well established methods for determination of transition behavior or prediction of ductile crack arrest for the new generation of high-toughness steels. The irregular fracture performance (e.g. so-called "abnormal inverse fracture" appearance, significant scattering in ductile-to-brittle-transition-temperature region, etc.) suggests that the influence of pipe dimensions, loading parameters, crack initiation resistance as well as testing procedure on the fracture behavior has been neither understood nor properly described. This work aims to shed light on these questions regarding the applicability of conventional methods and to better illuminate most relevant parameters affecting fracture behavior of high toughness steels. To achieve this goal, experimental data basis for analysis of fracture behavior in transition and upper shelf regime has been established by conducting quasi-static fracture mechanics tests and dynamic tests on Battelle Drop Weight Tear (BDWT or DWT) specimens at different temperatures. The evaluation of obtained test results in upper shelf has been additionally complemented by numerical simulation of damage behavior. The results highlight the influence of stress conditions on fracture behavior with reference to pipe dimensions and loading conditions and, subsequently, may be used as a basis for revision of existing design methods.}, subject = {Rissfortschritt}, language = {en} } @inproceedings{KofianiNonnWierzbickietal., author = {Kofiani, Kirki and Nonn, Aida and Wierzbicki, Tomasz and Kalwa, Christoph and Walters, Carey}, title = {Experiments and fracture modeling of high-strength pipelines for high and low stress triaxiality}, series = {22nd International Society of Offshore and Polar Engineering 2012 (ISOPE 2012), Rhodes, Greece, June 2012}, booktitle = {22nd International Society of Offshore and Polar Engineering 2012 (ISOPE 2012), Rhodes, Greece, June 2012}, abstract = {This paper provides results from a comprehensive study on mechanical characterization of high-strength pipeline steel, grade X100 using experimental and numerical methods. The material was characterized for anisotropic plasticity, fracture initiation for various states of stress, (pre-cracked) fracture toughness and uncracked ductility. The experimental program included tests on flat butterfly-shaped, central hole, notched and circular disk specimens for low stress triaxiality levels; as well as tests on round notched bar specimens and SENT fracture mechanics tests, for high values of stress triaxiality. This program covered a wide range of stress conditions and demonstrated its effect on the material resistance. Parallel to the experimental study, detailed numerical investigations were carried out to simulate all different experimental tests. Using an inverse method, a 3-parameter calibration was performed on the Modified Mohr-Coulomb (MMC) fracture model. Subsequently, the predictive capabilities of the MMC were evaluated by the comparison to the fracture toughness tests results, used extensively in the pipeline industry. The capabilities of the MIT fracture model have been demonstrated on an example of high strength offshore steel, X100. The outcome of this study was not only to provide, the overall characterization of the fracture behavior of this material as an example, but also to present the methodology on how to use the MMC model as a practical tool in pipeline design.}, language = {en} } @inproceedings{NonnKalwa, author = {Nonn, Aida and Kalwa, Christoph}, title = {Failure modeling of pipeline X100 Material in temperature transition region}, series = {22nd International Society of Offshore and Polar Engineering 2012 (ISOPE 2012), Rhodes, Greece}, booktitle = {22nd International Society of Offshore and Polar Engineering 2012 (ISOPE 2012), Rhodes, Greece}, abstract = {This paper focuses on the characterization of the fracture performance of X100 material in transition temperature region using both experimental and numerical methods. The ductile fracture has been analyzed using tests on round notched bar specimens and standard fracture mechanics tests performed at room temperature. In previous publications the damage model Gurson-Tvergaard-Needleman (GTN) has been applied and verified by existing experimental data to describe ductile fracture behavior. The brittle fracture and the fracture in temperature transition region have been studied by means of deep and shallow notched SENB specimens at two different temperatures T=- 80°C and -40°C. Besides elastic-plastic analyses to quantify constraint levels for different initial crack configurations at the onset of cleavage fracture, the brittle failure has been described using modified Beremin model. The influence of the stable crack growth on the cleavage failure probability in temperature transition region has been captured by coupling the ductile fracture model (GTN) with the modified Beremin model. Finally, examples have been presented for the practical application of the numerical results on the fracture assessment of the flawed high-strength pipelines.}, language = {en} } @inproceedings{NonnKalwa, author = {Nonn, Aida and Kalwa, Christoph}, title = {The effect of microstructure, strain hardening and strain rate on the fracture behavior of high strength pipeline steels}, series = {2nd International Conference on Material Modelling (ICMM2), 31th August - 2nd September, 2011 at Mines Paris Tech, France}, booktitle = {2nd International Conference on Material Modelling (ICMM2), 31th August - 2nd September, 2011 at Mines Paris Tech, France}, language = {en} } @inproceedings{NonnKalwa, author = {Nonn, Aida and Kalwa, Christoph}, title = {Application of damage mechanics approach for crack propagation in pipeline}, series = {19th Biennial Joint Technical Meeting (JTM) on Pipeline Research, April 29 - May 3, 2013, Sydney, Australia}, booktitle = {19th Biennial Joint Technical Meeting (JTM) on Pipeline Research, April 29 - May 3, 2013, Sydney, Australia}, language = {en} } @inproceedings{NonnKalwa, author = {Nonn, Aida and Kalwa, Christoph}, title = {Application of probabilistic fracture mechanics for safety assessment of longitudinally welded linepipes}, series = {6th Pipeline Technology Conference (2013), Ostend, Belgium}, booktitle = {6th Pipeline Technology Conference (2013), Ostend, Belgium}, language = {en} } @techreport{NeidhartLerchWiesingeretal., author = {Neidhart, Thomas and Lerch, Maximilian and Wiesinger, Doris and Zrenner, Louis}, title = {Kompakte {\"U}bertragungsleitungen f{\"u}r hohe Gleichspannungen: Langzeituntersuchungen an einer erdverlegten Versuchsanlage}, doi = {10.35096/othr/pub-2173}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-21730}, pages = {62, 58}, abstract = {Durch den Ausstieg aus der Verstromung fossiler Energietr{\"a}ger und der daraus resultierenden dezentralen Stromerzeugung ist ein Aus- bzw. Umbau des deutschen {\"U}bertragungsnetzes erforderlich. Weil aus der dezentralen Energieerzeugung große Trassenl{\"a}ngen resultieren, welche bei Wechselstrom zu Blindleistungsproblematiken f{\"u}hren, wird dort vermehrt auf Hochspannungs-Gleichstrom-{\"U}bertragung zur{\"u}ckgegriffen. Im Rahmen des Forschungsprojekts DC CTL DBI (direct current compact transmission line - directly buried investigastions) wurde ein gasisolierte HG{\"U}-Leiter (GIL) erdverlegt und bei st{\"a}ndigem Monitoring {\"u}ber umfangreiche Sensorik einem Langzeitversuch unterzogen. Anstelle einer klassischen Sandbettung kam ein zeitweise fließf{\"a}higer, selbstverdichtender Verf{\"u}llbaustoff (ZFSV) zum Einsatz. Somit k{\"o}nnen Sch{\"a}den an der {\"U}bertragungsleitung infolge Verdichtungsaufwand vermieden und gleichzeitig bessere Bodeneigenschaften hinsichtlich der W{\"a}rme- und Wassertransportprozesse erreicht werden.}, language = {de} } @incollection{SternerStadler, author = {Sterner, Michael and Stadler, Ingo}, title = {Energiespeicher im Wandel der Zeit}, series = {Energiespeicher - Bedarf, Technologien, Integration}, booktitle = {Energiespeicher - Bedarf, Technologien, Integration}, edition = {2. Auflage}, publisher = {Springer Vieweg}, address = {Berlin ; Heidelberg}, isbn = {978-3-662-48893-5}, doi = {10.1007/978-3-662-48893-5_1}, pages = {3 -- 24}, subject = {Energiespeicher}, language = {de} } @incollection{SternerStadlerEckertetal., author = {Sterner, Michael and Stadler, Ingo and Eckert, Fabian and Thema, Martin}, title = {Speicherintegration in einzelnen Energiesektoren}, series = {Energiespeicher - Bedarf, Technologien, Integration}, booktitle = {Energiespeicher - Bedarf, Technologien, Integration}, edition = {2. Auflage}, publisher = {Springer Vieweg}, address = {Berlin ; Heidelberg}, isbn = {978-3-662-48893-5}, doi = {10.1007/978-3-662-48893-5_13}, pages = {685 -- 767}, subject = {Energiespeicher}, language = {de} } @incollection{SternerBauer, author = {Sterner, Michael and Bauer, Franz}, title = {Definition und Klassifizierung von Energiespeichern}, series = {Energiespeicher - Bedarf, Technologien, Integration}, booktitle = {Energiespeicher - Bedarf, Technologien, Integration}, edition = {2. Auflage}, publisher = {Springer Vieweg}, address = {Berlin ; Heidelberg}, isbn = {978-3-662-48892-8}, doi = {10.1007/978-3-662-48893-5_2}, pages = {25 -- 49}, subject = {Energiespeicher}, language = {de} } @inproceedings{HopfenspergerDaubnerHerrmannetal., author = {Hopfensperger, Bernhard and Daubner, Andreas and Herrmann, Fabian and Hopkins, Andrew and Mellor, Phil}, title = {Investigation of Shifted PWM Methods for a Dual Three-Phase System to Reduce Capacitor RMS Current}, series = {PCIM Europe Digital Days 2020: International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management: 07.-08.07.2020, Online [proceedings]}, booktitle = {PCIM Europe Digital Days 2020: International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management: 07.-08.07.2020, Online [proceedings]}, publisher = {VDE-Verlag}, address = {Berlin, Offenbach}, isbn = {978-3-8007-5245-4}, pages = {124 -- 131}, abstract = {Mild hybrid automotive topologies containing a 48V high power (>15 kW) electric drive system demand a high integration of power electronics and electrical machine. A multi-phase motor winding topology helps to keep the per-phase operating currents to a reasonable level. Close integration and multi-phase system have led to a drive system with dual 3-phase systems supplied by a common 48V DC-link, which allows to shift PWM patterns for reduction of DC-link capacitor ripple current and size. This paper derives some basic rules for combinations of common PWM methods for dual 3-phase systems without magnetic cross-coupling. Experimental measurements verify simulated results.}, subject = {Elektroantrieb}, language = {en} } @inproceedings{GrauvoglStauderHopfenspergeretal., author = {Grauvogl, Dominik and Stauder, Peter and Hopfensperger, Bernhard and Gerling, Dieter}, title = {Multiphysics Design of a Wound Field Synchronous Machine with Magnetic Asymmetry}, series = {Proceedings of the 2021 IEEE International Electric Machines \& Drives Conference (IEMDC): 17-20 May 2021, Hartford, CT, USA}, booktitle = {Proceedings of the 2021 IEEE International Electric Machines \& Drives Conference (IEMDC): 17-20 May 2021, Hartford, CT, USA}, doi = {10.1109/IEMDC47953.2021.9449564}, abstract = {In this paper a multiphysics development method is used for designing a novel wound field synchronous machine of the future generation of high voltage traction drives. This method covers the domains of electromagnetics, the mechanical strength, thermal behavior and the magnetic noise. It is shown that the proposed novel asymmetric design with a circular flux barrier in combination with an asymmetric pole offset is fulfilling the requirements according to performance and torque ripple. A fatigue strength rotor mechanic concept is included. A hybrid cooling concept consisting of a water jacket cooled stator and air cooled rotor ensures the needed continuous power. Unacceptable noise levels are excluded by investigating the equivalent radiated power (ERP) level due to radial forces in the air gap. Finally, the multi-physical workflow resulted in a fully developed component with a high degree of maturity.}, language = {en} } @inproceedings{GrauvoglKrabinskiStauderetal., author = {Grauvogl, Dominik and Krabinski, Jeffrey and Stauder, Peter and Hopfensperger, Bernhard and Gerling, Dieter}, title = {NVH Comparison of a Novel Wound Field Synchronous Machine with Magnetic Asymmetry with a PSM for a HV Electric Drive}, series = {2021 JSAE Annual Congress (Spring) Proceedings; online meeting (No.76-21)}, booktitle = {2021 JSAE Annual Congress (Spring) Proceedings; online meeting (No.76-21)}, publisher = {JSAE}, abstract = {This paper shows how magnetic noises can be reduced with a wound field synchronous machine (WFSM) with magnetic asymmetry compared to a permanent magnet synchronous machine (PSM), operating at base speed range and full load. In order to reproduce a real noise behavior, the two rotor types are operated in a complete electric drive unit (EDU) consisting of an electric motor, gearbox, inverter and overall housing. In the concept study, the noise characteristics of the two electric machines is evaluated and compared via mechanical finite element method (FEM) simulations using the equivalent radiated power (ERP) level and Campbell diagrams. Furthermore, it is shown that critical frequency orders can already be identified by the analysis of the magnetic force density from the electromagnetic design without computationally intensive ERP calculations. In this context, the ERP investigations have shown that the unique feature of the magnetically asymmetric WFSM is the reduction of the slot harmonics. At the current state of the art, the slot harmonics can only be reduced with a rotor skewing. The disadvantage of this is a reduction in performance and a more expensive production. It is also remarkable that the magnetic asymmetry reduces the slot harmonics more than the rotor skewing in the PSM. In addition, both machines are still considered with a short-pitched stator winding to optimize the overall noise level by reducing the 24th frequency order.}, subject = {Elektroantrieb}, language = {en} } @inproceedings{LangSteinbornSteffensetal., author = {Lang, Christian and Steinborn, Florian and Steffens, Oliver and Lang, Elmar Wolfgang}, title = {Electricity Load Forecasting - An Evaluation of Simple 1D-CNN Network Structures}, series = {International Conference on Time Series and Forecasting (ITISE 2019), Proceedings of Papers Vol. 2, 25-27 September 2019, Granada (Spain)}, booktitle = {International Conference on Time Series and Forecasting (ITISE 2019), Proceedings of Papers Vol. 2, 25-27 September 2019, Granada (Spain)}, isbn = {978-84-17970-78-9}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-16649}, pages = {797 -- 806}, abstract = {This paper presents a convolutional neural network (CNN)which can be used for forecasting electricity load profiles 36 hours intothe future. In contrast to well established CNN architectures, the inputdata is one-dimensional. A parameter scanning of network parameters isconducted in order to gain information about the influence of the kernelsize, number of filters, and dense size. The results show that a goodforecast quality can already be achieved with basic CNN architectures.The method works not only for smooth sum loads of many hundredconsumers, but also for the load of apartment buildings}, language = {en} } @incollection{LangSteinbornSteffensetal., author = {Lang, Christian and Steinborn, Florian and Steffens, Oliver and Lang, Elmar Wolfgang}, title = {Applying a 1D-CNN Network to Electricity Load Forecasting}, series = {Theory and Applications of Time Series Analysis}, booktitle = {Theory and Applications of Time Series Analysis}, editor = {Valenzuela, O. and Rojas, F. and Herrera, L.J. and Pomares, H. and Rojas, I.}, publisher = {Springer}, doi = {10.1007/978-3-030-56219-9_14}, pages = {205 -- 218}, abstract = {This paper presents a convolutional neural network (CNN) which can be used for forecasting electricity load profiles 36 hours into the future. In contrast to well established CNN architectures, the input data is one-dimensional. A parameter scanning of network parameters is conducted in order to gain information about the influence of the kernel size, number of filters and number of nodes. Furthermore, different dropout methods are applied to the CNN and are evaluated. The results show that a good forecast quality can already be achieved with basic CNN architectures, the dropout improves the forecast. The method works not only for smooth sum loads of many hundred consumers, but also for the load of single apartment buildings.}, language = {en} } @inproceedings{KeimNonnLenzetal., author = {Keim, Vincent and Nonn, Aida and Lenz, D. and Brinnel, Viktoria and M{\"u}nstermann, Sebastian}, title = {Simulation of the ductile fracture behaviour of high toughness pipeline steels using combined damage models}, series = {Proceedings of the conference on Technology for future and ageing piplines, Ghent, Belgium}, booktitle = {Proceedings of the conference on Technology for future and ageing piplines, Ghent, Belgium}, language = {en} } @inproceedings{ArrietaCastroWeberRill, author = {Arrieta Castro, Abel and Weber, Hans Ingo and Rill, Georg}, title = {Design an integrate vehicle control based-on hierarchical architecture for improve the performance of ground vehicles}, series = {COBEM2015 : 23rd ABCM International Congress of Mechanical Engineering, December 6-11, 2015, Rio de Janeiro, RJ, Brazi}, booktitle = {COBEM2015 : 23rd ABCM International Congress of Mechanical Engineering, December 6-11, 2015, Rio de Janeiro, RJ, Brazi}, organization = {Associa{\c{c}}{\~a}o Brasileira de Engenharia e Ci{\^e}ncias Mec{\^a}nicas}, doi = {10.20906/cps/cob-2015-1970}, language = {en} } @inproceedings{DessortChucholowskiRill, author = {Dessort, Ronnie and Chucholowski, Cornelius and Rill, Georg}, title = {Parametrical approach for modeling of tire forces and torques in TMeasy 5}, series = {16. Internationales Stuttgarter Symposium, Automobil- und Motorentechnik, Bd. 1}, booktitle = {16. Internationales Stuttgarter Symposium, Automobil- und Motorentechnik, Bd. 1}, editor = {Bargende, Michael and Reuss, Hans-Christian and Wiedemann, Jochen}, publisher = {Springer}, address = {Wiesbaden}, isbn = {978-3-658-13254-5}, doi = {10.1007/978-3-658-13255-2_31}, pages = {435 -- 449}, abstract = {For the dynamic simulation of on-road vehicles, the model-element "tire/road" is of special importance, according to its influence on the achievable results. Sufficient description of the interaction between tire and road is one of the most challenging tasks of vehicle modeling. Two groups of tire models can be classified: handling models and structural or high-frequency models. Usually, various assumptions are made in modeling vehicles as multibody systems. Therefore, in the interest of balanced modeling, the precision of the complete vehicle model should stand in reasonable relation to the performance of the applied tire model. Handling tire models are characterized by a useful compromise between user friendliness, model complexity, and efficiency in computation time on the one hand, and precision in representation on the other hand.}, language = {en} }