@incollection{KralHaumerGrabner, author = {Kral, Christian and Haumer, Anton and Grabner, Christian}, title = {Determination of Consistent Induction Motor Parameters}, series = {Electronic Engineering and Computing Technology}, volume = {60}, booktitle = {Electronic Engineering and Computing Technology}, editor = {Ao, Sio-Iong and Gelman, Len}, publisher = {Springer}, address = {Dordrecht}, isbn = {978-90-481-8775-1}, doi = {10.1007/978-90-481-8776-8_7}, pages = {71 -- 80}, abstract = {From the rating plate data of an induction motor the nominal efficiency can be determined. Without detailed knowledge of equivalent circuit parameters, partial load behavior cannot be computed. Therefore, a combined calculation and estimation scheme is presented, where the consistent parameters of an equivalent circuit are elaborated, exactly matching the nominal operating point. From these parameters part load efficiencies can be determined.}, language = {en} } @incollection{KralHaumerGrabner, author = {Kral, Christian and Haumer, Anton and Grabner, Christian}, title = {Broken Rotor Bars in Squirrel Cage Induction Machines - Modeling and Simulation}, series = {Electronic Engineering and Computing Technology}, booktitle = {Electronic Engineering and Computing Technology}, editor = {Ao, Sio-Iong and Gelman, Len}, publisher = {Springer}, address = {Dordrecht}, isbn = {978-90-481-8775-1}, doi = {10.1007/978-90-481-8776-8_8}, pages = {81 -- 91}, abstract = {This paper presents a physical model of a squirrel cage induction machine with rotor topology. The machine is modeled in Modelica, an object oriented multi physical modeling system. The presented machine model is used to investigate electrical rotor asymmetries in induction machines. For the case of a single broken rotor bar a simulation model is compared with measurement results.}, language = {en} } @incollection{KralHaumer, author = {Kral, Christian and Haumer, Anton}, title = {Object Oriented Modeling of Rotating Electrical Machines}, series = {Advances in Computer Science and Engineering}, booktitle = {Advances in Computer Science and Engineering}, editor = {Schmidt, Matthias}, publisher = {IntechOpen}, isbn = {978-953-307-173-2}, doi = {10.5772/15898}, pages = {135 -- 160}, language = {en} } @inproceedings{SippenauerBruecklHenneke, author = {Sippenauer, Thomas and Br{\"u}ckl, Oliver and Henneke, Markus}, title = {Verankerung von Flexibilit{\"a}t in der Netzplanung}, series = {Zuk{\"u}nftige Stromnetze: 27.-28. Januar 2021, 03.-04. Februar 2021}, booktitle = {Zuk{\"u}nftige Stromnetze: 27.-28. Januar 2021, 03.-04. Februar 2021}, publisher = {Conexio GmbH}, address = {Pforzheim}, isbn = {978-3-948176-12-9}, doi = {10.35096/othr/pub-5563}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-55632}, pages = {79 -- 92}, abstract = {Die Energiewende f{\"u}hrt zu einem steigenden Zubau erneuerbarer Energieerzeugungsanlagen im Verteilungsnetz. Ebenso ist mit einem verst{\"a}rkten Zuwachs der Elektromobilit{\"a}t zu rechnen, der zu einer weiteren Ausreizung der zul{\"a}ssigen Spannungsbereiche und Leitungsauslastungen beitragen kann. Um die Aufnahmef{\"a}higkeit des Verteilungsnetzes zu erh{\"o}hen, wurden in der Vergangenheit verschiedene L{\"o}sungen entwickelt und etabliert. Ein zus{\"a}tzlicher Baustein zur Behebung von Netzengp{\"a}ssen und Spannungsproblemen sind zeitliche Verlagerungen von Einspeisungen und Verbrauchslasten in der Mittelspannungsebene. Diese sogenannten Flexibilit{\"a}tsmaßnahmen sind derzeit noch nicht Stand der Technik. Um einen hohen Nutzen stiften zu k{\"o}nnen, indem sie zu einer effizienten Einsparung an Asset beitragen, m{\"u}ssen sie in der Netzplanung abbildbar gemacht werden. Dazu sind einerseits geeignete technische und zuverl{\"a}ssigkeitstheoretische Anforderungen an die Flexibilit{\"a}tsmaßnahmen herauszuarbeiten, um eine m{\"o}glichst hohe Gesamteffizienz bei Netz- und Anlagenbetreibern zu erzielen und andererseits ein Verfahren zu finden, mit dem Manipulationsm{\"o}glichkeiten (INC-DEC-Gaming) ausgeschlossen bzw. geringgehalten werden k{\"o}nnen.}, language = {de} } @inproceedings{SippenauerBrueckl, author = {Sippenauer, Thomas and Br{\"u}ckl, Oliver}, title = {Verankerung von Flexibilit{\"a}t in der Netzplanung}, series = {ScienceLab (begleitender Workshop zur Konferenz Zuk{\"u}nftige Stromnetze: 29.-30. Januar 2020, Berlin)}, booktitle = {ScienceLab (begleitender Workshop zur Konferenz Zuk{\"u}nftige Stromnetze: 29.-30. Januar 2020, Berlin)}, publisher = {Conexio GmbH}, address = {Pforzheim}, isbn = {978-3-948176-07-5}, doi = {10.35096/othr/pub-5559}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-55592}, pages = {77 -- 81}, abstract = {Im Rahmen des Projektes C/sells wurden mehrere Mittelspannungsnetze modelliert, um die aktuellen Spannungsverh{\"a}ltnisse und Leitungsauslastungen nachbilden zu k{\"o}nnen. Zudem wurden, angelehnt an den Netzentwicklungsplan, Szenarien f{\"u}r den zuk{\"u}nftigen PV-Zubau und die potenzielle Entwicklung der Elektromobilit{\"a}t entworfen. Auf Basis der Ergebnisse l{\"a}sst sich eine Netzanalyse hinsichtlich Spannungs- und Stromgrenzwert{\"u}berschreitungen sowie zu deren potenziellen Auftrittszeitpunkten und Auftrittsdauern durchf{\"u}hren. Parallel wurde anhand von Sensitivit{\"a}tsanalysen untersucht, welche Wirksamkeit Flexibilit{\"a}tseins{\"a}tze an den verschiedenen Netzknoten auf den Engpass haben. Dadurch kann bestimmt werden, wie effektiv die verf{\"u}gbaren, in der Regel {\"o}rtlich gebundenen Flexibilit{\"a}tsanbieter eingesetzt werden k{\"o}nnen. Da die Sensitivit{\"a}ten arbeitspunktabh{\"a}ngig sind, wurden verschiedene Zeitpunkte im Jahresverlauf berechnet und die jeweilige {\"A}nderungen der Wirksamkeit ausgewertet. Neben der H{\"o}he der Leistungsabweichung wurde die Flexibilit{\"a}tsanforderung auch anhand der Einsatzzeitpunkte und Einsatzdauer sowie anhand der H{\"a}ufigkeit der n{\"o}tigen Flexibilit{\"a}tseins{\"a}tze charakterisiert. Aus den gewonnenen Erkenntnissen soll abgeleitet werden, inwiefern sich der flexible Einsatz der Verbrauchsanlagen in der Netzplanung verankern l{\"a}sst. Besonders relevant ist deshalb, mit welcher Verl{\"a}sslichkeit die Flexibilit{\"a}t abgerufen werden kann. Eine sehr hohe Verl{\"a}sslichkeit l{\"a}sst sich je nach Flexibilit{\"a}tsanbieter m{\"o}glicherweise nicht oder nur zu sehr hohen Preisen gew{\"a}hrleisten. Die Eignung der Flexibilit{\"a}tseins{\"a}tze wird somit sowohl aus technischer als auch aus wirtschaftlicher Sicht bewertet. Da eine vollst{\"a}ndige Verl{\"a}sslichkeit ohnehin nicht sichergestellt werden kann (technische St{\"o}rungen einer Anlage, Wettereinfl{\"u}sse, etc.), werden auch Fallback-Strategien, z. B. Einspeisespitzenkappung, in die Analyse einbezogen.}, language = {de} } @inproceedings{SippenauerBrueckl, author = {Sippenauer, Thomas and Br{\"u}ckl, Oliver}, title = {Erschließung der Flexibilit{\"a}tspotenziale eines Trinkwasserversorgungssystems}, series = {ScienceLab (begleitender Workshop zur Konferenz „Zuk{\"u}nftige Stromnetze": 2020, Berlin)}, booktitle = {ScienceLab (begleitender Workshop zur Konferenz „Zuk{\"u}nftige Stromnetze": 2020, Berlin)}, publisher = {Conexio GmbH}, address = {Pforzheim}, isbn = {978-3-948176-07-5}, doi = {10.35096/othr/pub-5562}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-55629}, pages = {126 -- 130}, abstract = {In Zusammenarbeit mit den Kreiswerken Cham wurde an der OTH Regensburg das Trinkwasserversorgungsgebiet mit allen relevanten Pumpen und Hochbeh{\"a}ltern nachgebildet. Mithilfe des Modells kann die aktuelle, f{\"u}llstandgesteuerte Betriebsweise unter Einhaltung der Randbedingungen (Grenzwerte der Beh{\"a}lterf{\"u}llst{\"a}nde, elektrische Verschaltung der Pumpen) simuliert werden. Daraus l{\"a}sst sich auch das gesicherte, f{\"u}r die Netzplanung geeignete Flexibilit{\"a}tspotenzial anhand der Leistungsabweichung gegen{\"u}ber dem regul{\"a}ren Fahrplan, der Einsatzdauer, dem Einsatzzeitpunkt und der Pause zwischen den Flexibilit{\"a}tsabrufen charakterisieren. In einem Feldversuch wurde vordergr{\"u}ndig untersucht, inwiefern der Einsatz von Flexibilit{\"a}t in der Trinkwasserversorgung technisch umsetzbar ist.}, language = {de} } @article{BruecklHaslbeckPortneretal., author = {Br{\"u}ckl, Oliver and Haslbeck, Matthias and Portner, Olaf and Hinz, Gerhard}, title = {Kostenminimaler Netzanschluss einer 8-MW-PV-Anlage mithilfe regelbarer Ortsnetztransformatoren}, series = {Energiewirtschaftliche Tagesfragen}, volume = {64}, journal = {Energiewirtschaftliche Tagesfragen}, number = {6}, publisher = {Energiewirtschaft und Technik, Verl.-Ges.}, address = {Gr{\"a}felfing}, pages = {63 -- 65}, abstract = {Die steigende Anzahl der Erzeugungsanlagen (EZA) in den Verteilnetzen zwingt viele Verteilnetzbetreiber zum kostenintensiven Netzausbau. Dabei sind die EZA gem{\"a}ß EEG am technisch und wirtschaftlich g{\"u}nstigsten Verkn{\"u}pfungspunkt anzuschließen. Zur Bestimmung dieses Punktes ist ein Vergleich sinnvoller Netzanschlussvarianten durchzuf{\"u}hren. Regelbare Ortsnetztransformatoren (RONT) erweitern seit Kurzem die Netzanschlussm{\"o}glichkeiten, auch auf Mittelspannungsebene. Das Beispiel eines Anschlusses f{\"u}r eine 8-MW-PV-Anlage zeigt, dass der optimale Netzanschluss eine Kombination zwischen RONT, Spannungsblindleistungsregelung, Trennstellenverlagerung und Leitungsverst{\"a}rkung sein kann. In diesem Fall bemerkenswert ist, dass der RONT-Einsatz die Netzanschlusskosten um rd. 60 \% gegen{\"u}ber einer separaten Anbindung am Umspannwerk reduziert. Die Autoren beschreiben eingangs die Problematik hoher Netzausbaukosten beim Anschluss von Photovoltaik-Fl{\"a}chenanlagen. Das Vorgehen der durchgef{\"u}hrten Netzanalyse im konkreten Fall (Abb.: Grafische Darstellung des s{\"u}dlichen MS-Netzes der Stadtwerke Kehlheim mit angedeuteter Einspeiseleistung) und die 6 analysierten Netzanschlussvarianten werden beschrieben und diskutiert (Abb.: Gegen{\"u}berstellung der Investitionen der verschiedenen Netzausbauszenarien). Die oben genannte g{\"u}nstigste Anschlussvariante besteht aus folgender Kombination: Verlegung der vorhandenen Netztrennstelle zwischen zwei 20-kV-Str{\"a}nge; Verst{\"a}rkung einer bestehenden Freileitungsstrecke {\"u}ber 1 km; Einsatz von maximal 15RONT sowie Spannungsblindleistungsregelung durch die PV-Fl{\"a}chenanlage.}, language = {de} } @inproceedings{HaslbeckRauchBrueckletal., author = {Haslbeck, Matthias and Rauch, Johannes and Br{\"u}ckl, Oliver and B{\"a}smann, Rainer and G{\"u}nther, Andreas and Rietsche, Hansj{\"o}rg and Tempelmeier, Achim}, title = {Blindleistungsmanagement in Mittelspannungsnetzen}, series = {Zuk{\"u}nftige Stromnetze 2019, 30.-31.Jan.2019, Berlin}, booktitle = {Zuk{\"u}nftige Stromnetze 2019, 30.-31.Jan.2019, Berlin}, pages = {170 -- 182}, abstract = {Die Energiewende f{\"u}hrt zu neuen Herausforderungen f{\"u}r Verteilungsnetzbetreiber hinsichtlich der Erbringung von Systemdienstleistungen, der Integrationsf{\"a}higkeit weiterer Erzeugungsanlagen und Lasten sowie bei der Gew{\"a}hrleistung einer hohen Versorgungssicherheit. Die Deckung der steigenden Blindleistungsbedarfe seitens der Netzbetriebsmittel, Verbraucher und Erzeuger gewinnt durch den Wegfall der Großkraftwerke f{\"u}r Netzbetreiber zunehmend an Bedeutung.Das abgeschlossene und vom BMWi gef{\"o}rderte Projekt SyNErgie (Laufzeit von 03/2015 bis 05/2018) besch{\"a}ftigt sich mit der Entwicklung von Blindleistungsmanagementsystemen f{\"u}r Mittelspannungsnetze (MS-Netze). Ziel dabeiist es, das bisher ungenutzte, freie Blindleistungspotenzial betrieblicher Kompensationsanlagen und dezentraler Erzeugungsanlagen (allg.: Q-Quellen) zu nutzen, um die Blindleistungs{\"a}nderungsf{\"a}higkeit 1 eines Verteilungsnetzes zu erh{\"o}hen. Diese Ver{\"o}ffentlichung stellt ausgew{\"a}hlte Einzelergebnisse und Erfahrungen des Projektes vor, welche u. a. {\"u}ber zahlreiche Messungen inMS-Netzen bei Firmen mit Anschlusspunkt in der MS-Ebene, Netzsimulationen und mathematische Modelle abgeleitet wurden.}, language = {de} } @misc{HaslbeckBrueckl, author = {Haslbeck, Matthias and Br{\"u}ckl, Oliver}, title = {Liberalisierung von Systemdienstleistungen}, series = {Zuk{\"u}nftige Stromnetze f{\"u}r erneuerbare Energien}, journal = {Zuk{\"u}nftige Stromnetze f{\"u}r erneuerbare Energien}, publisher = {Ostbayerisches Technologie-Transfer-Institut (OTTI)}, address = {Regensburg}, isbn = {978-3-943891-34-8}, pages = {170 -- 175}, abstract = {Die Liberalisierung der Blindleistung und Schaffung von regionalen nicht ausschreibungspflichtigen Q-Beschaffungsprozessen erm{\"o}glicht vor allem k{\"u}nftig erhebliche Kostenreduktionspotenziale. Allerdings ist die Etablierung mit umfangreichen Eingriffen in den heutigen Normen- und Gesetzesrahmen verbunden. Damit diese Potenziale gehoben werden k{\"o}nnen, bedarf es einerseits der M{\"o}glichkeit der Kostenanrechnung im Rahmen der Netznutzungsentgelte, andererseits eines Anreizsystems, sinnvoll und sorgsam mit Q umzugehen. Grunds{\"a}tzlich ist vorher gr{\"u}ndlich zu untersuchen, ob und ab welchem Zeitpunkt die Liberalisierung der Blindleistung zielf{\"u}hrend ist und wie im Detail die Liberalisierung der Blindleistung auszugestalten w{\"a}re.}, language = {de} } @inproceedings{KrausBrueckl, author = {Kraus, Hermann and Br{\"u}ckl, Oliver}, title = {Use and Programmatic Extension of PowerFactory for the Implementation of Automated Network Planning at the Distribution Grid Level}, series = {2020 10th International Conference on Advanced Computer Information Technologies (ACIT): 16-18 Sept. 2020}, booktitle = {2020 10th International Conference on Advanced Computer Information Technologies (ACIT): 16-18 Sept. 2020}, publisher = {IEEE}, doi = {10.1109/ACIT49673.2020.9208900}, pages = {731 -- 736}, abstract = {In this paper it is presented how the network calculation program PowerFactory is used to implement automated network planning algorithms. PowerFactory's internal functions and data sets are discussed and it is shown how the functions and data sets have been extended by specially developed scripts to enable the automation of network planning steps. Finally, the methodology applied to calculate grid use cases is briefly discussed.}, language = {en} } @incollection{SternerBreuerDreesetal., author = {Sterner, Michael and Breuer, Christopher and Drees, Tim and Eckert, Fabian and Maaz, Andreas and Pape, Carsten and Rotering, Niklas and Thema, Martin}, title = {Speicherbedarf in der Stromversorgung}, series = {Energiespeicher - Bedarf, Technologien, Integration}, booktitle = {Energiespeicher - Bedarf, Technologien, Integration}, edition = {2. Auflage}, publisher = {Springer Vieweg}, address = {Berlin ; Heidelberg}, isbn = {978-3-662-48893-5}, doi = {10.1007/978-3-662-48893-5_3}, pages = {53 -- 140}, subject = {Speicherbedarf}, language = {de} } @inproceedings{RauchBruecklEngel, author = {Rauch, Johannes and Br{\"u}ckl, Oliver and Engel, Bernd}, title = {Analysis and optimization of the steady state voltage deviation demand for reactive power planning using installed reactive power sources}, series = {NEIS 2022; Conference on Sustainable Energy Supply and Energy Storage Systems, 26-27 September 2022, Hamburg}, booktitle = {NEIS 2022; Conference on Sustainable Energy Supply and Energy Storage Systems, 26-27 September 2022, Hamburg}, editor = {Schulz, Detlef}, publisher = {VDE-Verlag}, address = {Berlin}, isbn = {978-3-8007-5983-5}, issn = {2510-6902}, pages = {175 -- 182}, abstract = {The provision of reactive power is one option for maintaining the grid voltage, that is defined as an ancillary service in Germany. This paper presents an approach for determining deficient voltage deviation demands within an electrical grid for long term reactive power planning investigations. In contrast to previous approaches, which evaluate the Q-behavior of extended ward elements or grid assets, voltage deviations are analyzed bus-specifically. So further reactive power planning investigations are able to scale and optimize additional reactive power sources directly on planning voltage limits using load flow sensitivity techniques. The focus lies on the analysis of the steady state demand at base case conditions. Therefore, a grid planning process is conceptualized. An optimal power flow algorithm based on Differential Evolution is used for an optimal reactive power dispatch of installed reactive power sources, e. g. reactive power compensation systems or (renewable) energy sources to minimize the total voltage deviation according to voltage limits of Transmission System Operators planning principles. Methodological and processuals specifications as well as an application use case with an exemplary transmission system are presented in this paper.}, language = {en} } @article{ThemaWeidlichHoerletal., author = {Thema, Martin and Weidlich, Tobias and H{\"o}rl, Manuel and Bellack, Annett and M{\"o}rs, Friedemann and Hackl, Florian and Kohlmayer, Matthias and Gleich, Jasmin and Stabenau, Carsten and Trabold, Thomas and Neubert, Michael and Ortloff, Felix and Brotsack, Raimund and Schmack, Doris and Huber, Harald and Hafenbradl, Doris and Karl, J{\"u}rgen and Sterner, Michael}, title = {Biological CO2-Methanation: An Approach to Standardization}, series = {Energies}, volume = {12}, journal = {Energies}, number = {9}, publisher = {MDPI}, doi = {10.3390/en12091670}, pages = {1 -- 32}, abstract = {Power-to-Methane as one part of Power-to-Gas has been recognized globally as one of the key elements for the transition towards a sustainable energy system. While plants that produce methane catalytically have been in operation for a long time, biological methanation has just reached industrial pilot scale and near-term commercial application. The growing importance of the biological method is reflected by an increasing number of scientific articles describing novel approaches to improve this technology. However, these studies are difficult to compare because they lack a coherent nomenclature. In this article, we present a comprehensive set of parameters allowing the characterization and comparison of various biological methanation processes. To identify relevant parameters needed for a proper description of this technology, we summarized existing literature and defined system boundaries for Power-to-Methane process steps. On this basis, we derive system parameters providing information on the methanation system, its performance, the biology and cost aspects. As a result, three different standards are provided as a blueprint matrix for use in academia and industry applicable to both, biological and catalytic methanation. Hence, this review attempts to set the standards for a comprehensive description of biological and chemical methanation processes.}, language = {en} } @incollection{SternerEckertHenningetal.2017, author = {Sterner, Michael and Eckert, Fabian and Henning, Hans-Martin and Trost, Tobias}, title = {Speicherbedarf im Verkehrs- und Chemiesektor}, series = {Energiespeicher - Bedarf, Technologien, Integration}, booktitle = {Energiespeicher - Bedarf, Technologien, Integration}, edition = {2. Auflage}, publisher = {Springer Vieweg}, address = {Berlin ; Heidelberg}, isbn = {978-3-662-48893-5}, doi = {10.1007/978-3-662-48893-5_5}, pages = {169 -- 192}, year = {2017}, subject = {Speicherbedarf}, language = {de} } @incollection{SternerThema, author = {Sterner, Michael and Thema, Martin}, title = {Vergleich der Speichersysteme}, series = {Energiespeicher - Bedarf, Technologien, Integration}, booktitle = {Energiespeicher - Bedarf, Technologien, Integration}, edition = {2. Auflage}, publisher = {Springer Vieweg}, address = {Berlin ; Heidelberg}, isbn = {978-3-662-48893-5}, doi = {10.1007/978-3-662-48893-5_12}, pages = {645 -- 682}, subject = {Energiespeicher}, language = {de} } @incollection{SternerStadlerEckertetal., author = {Sterner, Michael and Stadler, Ingo and Eckert, Fabian and Gerhardt, Norman and von Olshausen, Christian and Thema, Martin and Trost, Tobias}, title = {Speicherintegration zur Kopplung unterschiedlicher Energiesektoren}, series = {Energiespeicher - Bedarf, Technologien, Integration}, booktitle = {Energiespeicher - Bedarf, Technologien, Integration}, edition = {2. Auflage}, publisher = {Springer Vieweg}, address = {Berlin ; Heidelberg}, isbn = {978-3-662-48893-5}, doi = {10.1007/978-3-662-48893-5_14}, pages = {769 -- 818}, subject = {Energieversorgung}, language = {de} } @incollection{SternerBauerCrotoginoetal., author = {Sterner, Michael and Bauer, Franz and Crotogino, Fritz and Eckert, Fabian and von Olshausen, Christian and Teichmann, Daniel and Thema, Martin}, title = {Chemische Energiespeicher}, series = {Energiespeicher - Bedarf, Technologien, Integration}, booktitle = {Energiespeicher - Bedarf, Technologien, Integration}, edition = {2. Auflage}, publisher = {Springer Vieweg}, address = {Berlin ; Heidelberg}, isbn = {978-3-662-48893-5}, doi = {10.1007/978-3-662-48893-5_8}, pages = {327 -- 493}, subject = {Energiespeicher}, language = {de} } @inproceedings{MalzSteffensKrenkel, author = {Malz, Sebastian and Steffens, Oliver and Krenkel, Walter}, title = {Solaraktive Fassaden im Bestandsbau}, series = {Bauphysiktage 2019 in Weimar - Bauphysik in Forschung und Praxis, 25. und 26. September 2019, Bauhaus-Universit{\"a}t Weimar}, booktitle = {Bauphysiktage 2019 in Weimar - Bauphysik in Forschung und Praxis, 25. und 26. September 2019, Bauhaus-Universit{\"a}t Weimar}, editor = {V{\"o}lker, Conrad and Kornadt, Oliver and Jentsch, Mark and Vogel, Albert}, isbn = {978-3-00-063821-3}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-20464}, pages = {127 -- 129}, abstract = {Im Rahmen des Forschungsprojektes MAGGIE, das am Beispiel des historischen Quartiers Margaretenau in Regensburg innovative L{\"o}sungen f{\"u}r modernes und bezahlbares Wohnen erforscht, soll {\"u}ber eine solaraktive Fassade Sonnenw{\"a}rme im Bestandsmauerwerk eingespeichert werden, um so den Energiebedarf des Geb{\"a}udes zu reduzieren.}, language = {de} } @article{LiLange, author = {Li, Liwen and Lange, Klaus W.}, title = {Planning Principles for Integrating Community Empowerment into Zero-Net Carbon Transformation}, series = {smart cities}, volume = {2023}, journal = {smart cities}, number = {6}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/smartcities6010006}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-57765}, pages = {100 -- 122}, abstract = {The adoption of the UN 2030 Agenda and the Sustainable Development Goals is a landmark in international sustainability politics. For example, Europe has set ambitious targets to achieve 100 climate-neutral and smart cities by 2030. However, numerous case studies from different countries have found that accelerating the transition to net-zero carbon emissions is easily hampered by the lack of a coherent systems framework, and that implementation gaps remain at the community level. These barriers are often due to a lack of an adequate end-user (i.e., household) input and early planning participation. This work therefore aims to improve on conventional planning methods that do not reflect innovative technologies with uncertainty and may not be applicable due to the lack of community empowerment, which is a dynamic learning and intervention opportunity for end-users at different planning stages (i.e., outreach, survey, planning, implementation, management, and maintenance). Using the lessons learned from participatory action research, whereby the author was involved as a project director throughout the planning and design process, we identified a six-step cycle principle. The steps are (1) collective action commitments, (2) local values and resource identification, (3) carbon footprint inventory, (4) optimized integration of environment, economy, and energy action plans, (5) Flexible strategic energy system plans, and (6) digital performance monitoring. Ultimately, the outcomes provide application support for policymakers and planners and stimulate community engagement to contribute to the achievement of zero net carbon emissions.}, language = {en} } @inproceedings{BruecklKrpalRiepl, author = {Br{\"u}ckl, Oliver and Krpal, Ondrej and Riepl, Markus}, title = {Influence of wind and solar energy on the frequency of switching operations of On-Load Tap-Changers (OLTC)}, series = {Proceedings of the 13th International Scientific Conference Electric Power Engineering 2012, EPE 2012; Vol. 2}, booktitle = {Proceedings of the 13th International Scientific Conference Electric Power Engineering 2012, EPE 2012; Vol. 2}, publisher = {EPE}, address = {Brno, Czech Republic}, organization = {Brno University of Technology / Faculty of Electrical Engineering and Communication Department of Electrical Power Engineering and Centre for Research and Utilization of Renewable Energy}, pages = {719 -- 722}, language = {en} } @incollection{SternerEckertGerhardtetal., author = {Sterner, Michael and Eckert, Fabian and Gerhardt, Norman and Henning, Hans-Martin and Palzer, Andreas}, title = {Speicherbedarf in der W{\"a}rmeversorgung}, series = {Energiespeicher - Bedarf, Technologien, Integration}, booktitle = {Energiespeicher - Bedarf, Technologien, Integration}, edition = {2. Auflage}, publisher = {Springer Vieweg}, address = {Berlin ; Heidelberg}, isbn = {978-3-662-48893-5}, doi = {10.1007/978-3-662-48893-5_4}, pages = {141 -- 168}, subject = {Energiespeicher}, language = {de} } @techreport{Brueckl, author = {Br{\"u}ckl, Oliver}, title = {Hemmnisse im Verteilnetzausbau und deren {\"U}berwindung}, publisher = {INA - Institut f{\"u}r Netz- und Anwendungstechnik GmbH}, address = {Waldm{\"u}nchen}, doi = {10.35096/othr/pub-6043}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-60438}, pages = {84}, abstract = {Die Bundesregierung hat ambitionierte Ausbaupfade f{\"u}r die Windenergie und Photovoltaik festgelegt. Allerdings gef{\"a}hrdet vor allem der Verteilnetzausbau und der Netzanschluss der Erneuerbare-Energien-Anlagen (EE-Anlagen) die Erreichung dieser hochgesteckten Ziele. In einem Gutachten im Auftrag der Fraktion von B{\"u}ndnis 90/DIE GR{\"U}NEN im Bayerischen Landtag identifiziert Prof. Dr.-Ing. Oliver Br{\"u}ckl die wesentlichen Hemmnisse f{\"u}r den beschleunigten Verteilnetzausbau und den Netzanschluss f{\"u}r EE-Anlagen und diskutiert L{\"o}sungsans{\"a}tze in folgenden Bereichen: Regulierungsrahmen f{\"u}r die Verteilnetzbetreiber, Genehmigungsverfahren von Netzausbauprojekten, Praxis der Netzintegration von EE-An lagen, Personalkapazit{\"a}ten, Beschaffung von Betriebsmitteln und Bau von Anlagen, Zertifizierungsprozess f{\"u}r den Netzanschluss von EE-Anlagen. Im Rahmen des Gutachtens wurden ca. 35 Interviews mit verschiedenen Stakeholdern gef{\"u}hrt: Netzbetreiber und Stadtwerke, Projektierer*innen, Herstellerindustrie, Verb{\"a}nde und Beh{\"o}rden.}, language = {de} } @article{BruecklDalissonStrohmayeretal., author = {Br{\"u}ckl, Oliver and Dalisson, Nils and Strohmayer, Bernhard and Haslbeck, Matthias}, title = {Spannungshaltungsmaßnahmen im Verteilungsnetz : Systemvergleich}, series = {EW : Magazin f{\"u}r die Energie-Wirtschaft}, volume = {113}, journal = {EW : Magazin f{\"u}r die Energie-Wirtschaft}, number = {6}, publisher = {VWEW-Energieverl.}, address = {Frankfurt am Main}, issn = {1619-5795}, pages = {66 -- 69}, abstract = {Verteilungsnetzbetreibern stehen mittlerweile viele Maßnahmen zur Behebung des Spannungsbandproblems zur Verf{\"u}gung. Innovative Konzepte wie der regelbare Ortsnetztransformator werden in vielen Pilotprojekten erprobt. Unklar ist jedoch noch, welche Maßnahmen beziehungsweise Kombinationen langfristig wirtschaftlich am g{\"u}nstigsten sind. Die Ostbayerische Technische Hochschule Regensburg untersucht daher in einem Forschungsprojekt verschiedene Maßnahmen, um sie unter wirtschaftlichen, technischen und energetischen Gesichtspunkten bewerten zu k{\"o}nnen. Der Beitrag untersucht am Beispiel des Netzmodells eines Dorfnetzes mit zahlreichen Photovoltaikanlagen unterschiedliche Szenarien f{\"u}r die Spannungshaltung, wobei u. a. Maßnahmen wie die Parallelverkabelung, das Einspeisemanagement durch Spitzenlastkappung, die Spannungs-Blindleistungsregelung durch die Erzeugungsanlagen sowie ein RONT (regelbarer Ortsnetztransformator) betrachtet werden. Dabei zeigt sich, dass es keine Maßnahme gibt, die in allen Belangen die g{\"u}nstigste L{\"o}sung ist. Es zeichnet sich jedoch ab, dass der RONT in vielen F{\"a}llen (abh{\"a}ngig vom Durchdringungsgrad) die g{\"u}nstigste oder zumeist eine g{\"u}nstige L{\"o}sung zur Erh{\"o}hung der Netzanschlusskapazit{\"a}t darstellt.}, language = {de} } @inproceedings{SchweibererRauchBrueckl, author = {Schweiberer, Philipp and Rauch, Johannes and Br{\"u}ckl, Oliver}, title = {Long-term analysis of industrial reactive power potentials with consideration of plant-internal grid restrictions using the example of an industrial plant in a distribution grid}, series = {NEIS 2022; Conference on Sustainable Energy Supply and Energy Storage Systems, 26-27 September 2022, Hamburg}, booktitle = {NEIS 2022; Conference on Sustainable Energy Supply and Energy Storage Systems, 26-27 September 2022, Hamburg}, editor = {Schulz, Detlef}, publisher = {VDE-Verlag}, address = {Berlin}, isbn = {978-3-8007-5983-5}, issn = {2510-6902}, pages = {51 -- 56}, abstract = {Since conventional generation plants provide a considerable share of reactive power but are gradually being shut down due to energy transition, leading to power deficits at the transmission grid level, new concepts for the supply of reactive power must be developed. As one possibility for the latter, industrial plants in the distribution grid are considered suitable, as their reactive power potentials can contribute to voltage maintenance and thus to a grid- or system-serving behavior. In this paper, the determination of reactive power potentials provided by industrial compensation systems (ICS) is presented. An industrial plant in the medium voltage grid, with three installed ICSs, is investigated. The potentials are determined and described based on their time characteristics, which provide information about the occurrence and distribution of inductive and capacitive potentials. A grid simulation of the investigated industrial grid is used to analyze the effects of retrieving the reactive power potentials regarding equipment utilizations and voltage limits.}, language = {en} } @inproceedings{KrausBrueckl, author = {Kraus, Hermann and Br{\"u}ckl, Oliver}, title = {Concept for the Use of an Automated Network-Planning in the Distribution Grid Level with Coordination of Various Grid Expansion Measures}, series = {NEIS 2019 : Conference on Sustainable Energy Supply and Energy Storage Systems, Hamburg 19.09.2019 - 20.09.2019}, booktitle = {NEIS 2019 : Conference on Sustainable Energy Supply and Energy Storage Systems, Hamburg 19.09.2019 - 20.09.2019}, editor = {Schulz, Detlef}, isbn = {978-3-8007-5152-5}, pages = {161 -- 165}, abstract = {In this thesis, a concept for the automated use of network planning processes, which is part of the decision support system developed in the framework of the EU project CrossEnergy, is presented. This publication focuses on the automatic processing of input data and subsequent network modeling as well as the coordination of network extension measures for the systematic solution of static voltage and current problems. Different variants are calculated in order to be able to compare the design technologies.}, language = {en} } @inproceedings{NonnErdelenPepplerWesseletal., author = {Nonn, Aida and Erdelen-Peppler, Marion and Wessel, Waldemar and Mahn, Denise}, title = {How reliable are the current testing procedures for the safety assurance against crack propagation in seamless gas pipelines}, series = {Proceedings of the ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering (OMAE2014), Volume 4A: Structures, Safety and Reliability, June 8-13, 2014, San Francisco, USA}, booktitle = {Proceedings of the ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering (OMAE2014), Volume 4A: Structures, Safety and Reliability, June 8-13, 2014, San Francisco, USA}, doi = {10.13140/2.1.3190.6567}, abstract = {The worldwide growing energy demand with the exploration of new gas fields has promoted the development of high toughness seamless pipeline steels which should sustain the increasing demands resulting from the complex loading situations. One of the most important prerequisites for safe installation and operation of long distance gas transmission pipelines is the detailed knowledge and characterization of their fracture performance for specific applications. However, recent industry experience has revealed concerns related to the limitations and reliability of current test methods for brittle-to-ductile transition evaluation. Regarding the transition temperature evaluation, the critical issues involve Drop-Weight Tear Testing (DWTT) and full-scale West-Jefferson (WJ) test applied to the smaller pipes with diameter less than 500mm. The DWTT leads frequently to invalid results in terms of abnormal fracture appearance and inverse fracture occurrence. It is still not clear if this behavior is only owed to a testing effect, which material characteristics cause it and how far it reflects the full-scale behavior. Similar observations were made for the West-Jefferson tests, which could not be assessed in the standard manner either. Again, the question was towards testing effects and the behavior of the pipeline transporting gaseous media remains unanswered. Therefore, this paper aims at identifying open questions on basis of a literature study and own experimental results and showing possible ways forward in demonstrating safety in design against propagating fracture.}, language = {en} } @inproceedings{NonnParedesNordhagenetal., author = {Nonn, Aida and Paredes, Marcelo and Nordhagen, H. O. and Munkejord, S. T. and Wierzbicki, Tomasz}, title = {Challenges in fluid-structure modeling of crack propagation and arrest in modern steel pipelines}, series = {14th International Congress on Fracture (ICF14), 18-23 June 2017, Rhodes, Greece}, booktitle = {14th International Congress on Fracture (ICF14), 18-23 June 2017, Rhodes, Greece}, pages = {1351 -- 1352}, language = {en} } @inproceedings{KarbasianGrossWeegeNonnetal., author = {Karbasian, H. and Groß-Weege, J. and Nonn, Aida and Zimmermann, S. and Kalwa, Christoph}, title = {Assessment of collapse resistance of UOE pipes - comparison of full-scale and ring collapse tests}, series = {Proceedings of the 10th International Pipeline Conference 2014 (IPC 2014), September 29 - October 3, 2014, Calgary, Alberta, Canada}, booktitle = {Proceedings of the 10th International Pipeline Conference 2014 (IPC 2014), September 29 - October 3, 2014, Calgary, Alberta, Canada}, language = {en} } @inproceedings{NonnKalwa, author = {Nonn, Aida and Kalwa, Christoph}, title = {Analysis of dynamic ductile fracture propagation in pipeline steels}, series = {6th Pipeline Technology Conference (2013), Ostend, Belgium}, booktitle = {6th Pipeline Technology Conference (2013), Ostend, Belgium}, doi = {10.13140/2.1.4370.3046}, abstract = {Analysis of dynamic ductile fracture propagation in pipeline steels: a damage-T IS A WELL-ESTABLISHED fact that the successful application of new generation of high-strength steel grades for long-distance gas transmission depends strongly on full understanding and appropriate characterization of fracture resistance. A damage mechanics approach has found to be a very promising tool in supporting the experimental characterization of ductile fracture propagation. The major advantage of this approach lies in the consideration of the influence of local stress and strain variables on the damage evolution and thus its capability to describe the fracture resistance of the pipelines with different stress triaxiality level by using the same set of parameters. However, the wider application of this approach has been limited due to the issues such as reliable determination of input parameters and required material properties, mesh size dependence, etc.. The objective of this paper is to characterize dynamic ductile fracture resistance of X65 and X80 pipeline materials and to demonstrate the potential of damage mechanics approach for the simulation of dynamic fracture propagation by using two damage models: (1) Cohesive Zone (CZ) model and (2) Gurson-Tvergaard-Needleman (GTN) model. In the first step, results from quasi-static and dynamic tensile tests are used to describe plasticity in terms of flow curves. The calibration of input parameters for both models is performed by using the load-deformation curves from quasi-static tests on non-standard drop-weight tear (DWT) specimens with pre-fatigued crack. b. In the next step, estimated damage model parameters are verified by means of the dynamic tests on the pressed and Chevron notch DWT specimens. Different amounts of crack growth are established by varying the drop height. The experimental fracture resistance is quantified in terms of J-integral at specific crack length. The numerical results are evaluated with respect to global load-deformation and fracture resistance behavior. Furthermore, damage simulations are applied for quantification of local stress conditions in order to identify the major factors controlling the crack propagation. The results reported here serve as a basis for better understanding of fracture performance in dependences of geometry and material properties.}, language = {en} } @inproceedings{NonnErdelenPepplerWesseletal., author = {Nonn, Aida and Erdelen-Peppler, Marion and Wessel, Waldemar and Harksen, Silke and Mahn, Denise}, title = {How to assure fracture-propagation control for seamless gas pipelines?}, series = {Proceedings of the 2014 10th International Pipeline Conference (IPC2014), Volume 3: Operations, Monitoring, and Maintenance, Materials and Joining, September 29-October 3, 2014, Calgary, Canada}, booktitle = {Proceedings of the 2014 10th International Pipeline Conference (IPC2014), Volume 3: Operations, Monitoring, and Maintenance, Materials and Joining, September 29-October 3, 2014, Calgary, Canada}, doi = {10.1115/IPC2014-33169}, abstract = {Fracture propagation control in gas transmission gas pipelines belongs to the major design requirements for safe operation at high internal pressures. However, the current tests such as Drop-Weight-Tear Test (DWTT) and full-scale West-Jefferson (WJ) test reach the limits of their applicability with respect to transition temperature evaluation for seamless quenched and tempered small diameter pipes reflecting nowadays alloying concepts related to mechanical properties. Hereby, different geometry and material effects are evident which might lead to misinterpretation and unreliability of testing results. This paper aims to discuss open issues addressed in the literature and in own experimental findings with respect to reliability and transferability of testing methods, fracture parameters and their representativeness of seamless quenched and tempered pipeline behavior. By applying damage mechanics approach, it is possible to quantify the prevailing stress state and thus to understand the mechanisms controlling specific fracture appearance (ductile or brittle). Furthermore, studies were performed with objective to quantify the effect of different parameters (geometry, material and loading) on the fracture performance of the pipeline. The results from these investigations will serve as a basis for a safe pipeline design against propagating fracture.}, language = {en} } @inproceedings{NonnKalwa, author = {Nonn, Aida and Kalwa, Christoph}, title = {Simulation of ductile crack propagation in high-strength pipeline steel using damage models}, series = {9th International Pipeline Conference 2012 (IPC 2012), Calgary, Canada}, booktitle = {9th International Pipeline Conference 2012 (IPC 2012), Calgary, Canada}, doi = {10.1115/IPC2012-90653}, pages = {7}, abstract = {The performance of engineering design of high-strength steel pipelines has revealed the necessity to revise current design procedures. Therefore, an improved and detailed comprehension of fracture mechanisms and development of failure prediction tools are required in order to derive new design criteria. In last decades the most successful failure prediction tools for steel structures subjected to various type of loading can be encountered in the field of damage mechanics. This paper aims to describe ductile fracture behavior of high-strength steel pipelines by applying three different damage models, Gurson-Tvergaard-Needelman (GTN), Fracture Locus Curve (FLC) and Cohesive Zone (CZ). These models are evaluated regarding their capability to estimate ductile crack propagation in laboratory specimens and linepipe components without adjusting the calibrated parameters. It can be shown that appropriate parameter sets can be identified to reproduce load-deformation and fracture resistance curves accurately. The strain rate effect on the fracture behavior is examined by dynamic tests on the BDWT specimens. Finally, the shortcomings of the applied models are pointed out with the reference to possible extensions and modifications.}, language = {en} } @inproceedings{VoellingNonnSchneider, author = {V{\"o}lling, Alexander and Nonn, Aida and Schneider, Ingo}, title = {Anwendung des Koh{\"a}sivzonenmodells zur Abbildung von duktilem dynamischen Rissfortschritt in Gasfernleitungen}, series = {45. Tagung des AK Bruch, Berlin, Germany}, booktitle = {45. Tagung des AK Bruch, Berlin, Germany}, pages = {253 -- 262}, subject = {Ferngasleitung}, language = {de} } @inproceedings{NonnWesselSchmidt, author = {Nonn, Aida and Wessel, Waldemar and Schmidt, Tanja}, title = {Application of finite element analysis for assessment of fracture behavior of modern high toughness seamless pipeline steels}, series = {23rd International Society of Offshore and Polar Engineering 2013 (ISOPE 2013), Anchorage, USA}, booktitle = {23rd International Society of Offshore and Polar Engineering 2013 (ISOPE 2013), Anchorage, USA}, doi = {10.13140/2.1.4239.2322}, abstract = {Fracture behavior of seamless pipeline material X65Q acc. to API 5L has been studied both experimentally and numerically at different loading conditions (quasi-static vs. dynamic) and temperatures. The recent findings have shown difficulties in applying well established methods for determination of transition behavior or prediction of ductile crack arrest for the new generation of high-toughness steels. The irregular fracture performance (e.g. so-called "abnormal inverse fracture" appearance, significant scattering in ductile-to-brittle-transition-temperature region, etc.) suggests that the influence of pipe dimensions, loading parameters, crack initiation resistance as well as testing procedure on the fracture behavior has been neither understood nor properly described. This work aims to shed light on these questions regarding the applicability of conventional methods and to better illuminate most relevant parameters affecting fracture behavior of high toughness steels. To achieve this goal, experimental data basis for analysis of fracture behavior in transition and upper shelf regime has been established by conducting quasi-static fracture mechanics tests and dynamic tests on Battelle Drop Weight Tear (BDWT or DWT) specimens at different temperatures. The evaluation of obtained test results in upper shelf has been additionally complemented by numerical simulation of damage behavior. The results highlight the influence of stress conditions on fracture behavior with reference to pipe dimensions and loading conditions and, subsequently, may be used as a basis for revision of existing design methods.}, subject = {Rissfortschritt}, language = {en} } @inproceedings{KofianiNonnWierzbickietal., author = {Kofiani, Kirki and Nonn, Aida and Wierzbicki, Tomasz and Kalwa, Christoph and Walters, Carey}, title = {Experiments and fracture modeling of high-strength pipelines for high and low stress triaxiality}, series = {22nd International Society of Offshore and Polar Engineering 2012 (ISOPE 2012), Rhodes, Greece, June 2012}, booktitle = {22nd International Society of Offshore and Polar Engineering 2012 (ISOPE 2012), Rhodes, Greece, June 2012}, abstract = {This paper provides results from a comprehensive study on mechanical characterization of high-strength pipeline steel, grade X100 using experimental and numerical methods. The material was characterized for anisotropic plasticity, fracture initiation for various states of stress, (pre-cracked) fracture toughness and uncracked ductility. The experimental program included tests on flat butterfly-shaped, central hole, notched and circular disk specimens for low stress triaxiality levels; as well as tests on round notched bar specimens and SENT fracture mechanics tests, for high values of stress triaxiality. This program covered a wide range of stress conditions and demonstrated its effect on the material resistance. Parallel to the experimental study, detailed numerical investigations were carried out to simulate all different experimental tests. Using an inverse method, a 3-parameter calibration was performed on the Modified Mohr-Coulomb (MMC) fracture model. Subsequently, the predictive capabilities of the MMC were evaluated by the comparison to the fracture toughness tests results, used extensively in the pipeline industry. The capabilities of the MIT fracture model have been demonstrated on an example of high strength offshore steel, X100. The outcome of this study was not only to provide, the overall characterization of the fracture behavior of this material as an example, but also to present the methodology on how to use the MMC model as a practical tool in pipeline design.}, language = {en} } @inproceedings{NonnKalwa, author = {Nonn, Aida and Kalwa, Christoph}, title = {Failure modeling of pipeline X100 Material in temperature transition region}, series = {22nd International Society of Offshore and Polar Engineering 2012 (ISOPE 2012), Rhodes, Greece}, booktitle = {22nd International Society of Offshore and Polar Engineering 2012 (ISOPE 2012), Rhodes, Greece}, abstract = {This paper focuses on the characterization of the fracture performance of X100 material in transition temperature region using both experimental and numerical methods. The ductile fracture has been analyzed using tests on round notched bar specimens and standard fracture mechanics tests performed at room temperature. In previous publications the damage model Gurson-Tvergaard-Needleman (GTN) has been applied and verified by existing experimental data to describe ductile fracture behavior. The brittle fracture and the fracture in temperature transition region have been studied by means of deep and shallow notched SENB specimens at two different temperatures T=- 80°C and -40°C. Besides elastic-plastic analyses to quantify constraint levels for different initial crack configurations at the onset of cleavage fracture, the brittle failure has been described using modified Beremin model. The influence of the stable crack growth on the cleavage failure probability in temperature transition region has been captured by coupling the ductile fracture model (GTN) with the modified Beremin model. Finally, examples have been presented for the practical application of the numerical results on the fracture assessment of the flawed high-strength pipelines.}, language = {en} } @inproceedings{NonnKalwa, author = {Nonn, Aida and Kalwa, Christoph}, title = {The effect of microstructure, strain hardening and strain rate on the fracture behavior of high strength pipeline steels}, series = {2nd International Conference on Material Modelling (ICMM2), 31th August - 2nd September, 2011 at Mines Paris Tech, France}, booktitle = {2nd International Conference on Material Modelling (ICMM2), 31th August - 2nd September, 2011 at Mines Paris Tech, France}, language = {en} } @inproceedings{NonnKalwa, author = {Nonn, Aida and Kalwa, Christoph}, title = {Application of damage mechanics approach for crack propagation in pipeline}, series = {19th Biennial Joint Technical Meeting (JTM) on Pipeline Research, April 29 - May 3, 2013, Sydney, Australia}, booktitle = {19th Biennial Joint Technical Meeting (JTM) on Pipeline Research, April 29 - May 3, 2013, Sydney, Australia}, language = {en} } @inproceedings{NonnKalwa, author = {Nonn, Aida and Kalwa, Christoph}, title = {Application of probabilistic fracture mechanics for safety assessment of longitudinally welded linepipes}, series = {6th Pipeline Technology Conference (2013), Ostend, Belgium}, booktitle = {6th Pipeline Technology Conference (2013), Ostend, Belgium}, language = {en} } @techreport{NeidhartLerchWiesingeretal., author = {Neidhart, Thomas and Lerch, Maximilian and Wiesinger, Doris and Zrenner, Louis}, title = {Kompakte {\"U}bertragungsleitungen f{\"u}r hohe Gleichspannungen: Langzeituntersuchungen an einer erdverlegten Versuchsanlage}, doi = {10.35096/othr/pub-2173}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-21730}, pages = {62, 58}, abstract = {Durch den Ausstieg aus der Verstromung fossiler Energietr{\"a}ger und der daraus resultierenden dezentralen Stromerzeugung ist ein Aus- bzw. Umbau des deutschen {\"U}bertragungsnetzes erforderlich. Weil aus der dezentralen Energieerzeugung große Trassenl{\"a}ngen resultieren, welche bei Wechselstrom zu Blindleistungsproblematiken f{\"u}hren, wird dort vermehrt auf Hochspannungs-Gleichstrom-{\"U}bertragung zur{\"u}ckgegriffen. Im Rahmen des Forschungsprojekts DC CTL DBI (direct current compact transmission line - directly buried investigastions) wurde ein gasisolierte HG{\"U}-Leiter (GIL) erdverlegt und bei st{\"a}ndigem Monitoring {\"u}ber umfangreiche Sensorik einem Langzeitversuch unterzogen. Anstelle einer klassischen Sandbettung kam ein zeitweise fließf{\"a}higer, selbstverdichtender Verf{\"u}llbaustoff (ZFSV) zum Einsatz. Somit k{\"o}nnen Sch{\"a}den an der {\"U}bertragungsleitung infolge Verdichtungsaufwand vermieden und gleichzeitig bessere Bodeneigenschaften hinsichtlich der W{\"a}rme- und Wassertransportprozesse erreicht werden.}, language = {de} } @incollection{SternerStadler, author = {Sterner, Michael and Stadler, Ingo}, title = {Energiespeicher im Wandel der Zeit}, series = {Energiespeicher - Bedarf, Technologien, Integration}, booktitle = {Energiespeicher - Bedarf, Technologien, Integration}, edition = {2. Auflage}, publisher = {Springer Vieweg}, address = {Berlin ; Heidelberg}, isbn = {978-3-662-48893-5}, doi = {10.1007/978-3-662-48893-5_1}, pages = {3 -- 24}, subject = {Energiespeicher}, language = {de} } @incollection{SternerStadlerEckertetal., author = {Sterner, Michael and Stadler, Ingo and Eckert, Fabian and Thema, Martin}, title = {Speicherintegration in einzelnen Energiesektoren}, series = {Energiespeicher - Bedarf, Technologien, Integration}, booktitle = {Energiespeicher - Bedarf, Technologien, Integration}, edition = {2. Auflage}, publisher = {Springer Vieweg}, address = {Berlin ; Heidelberg}, isbn = {978-3-662-48893-5}, doi = {10.1007/978-3-662-48893-5_13}, pages = {685 -- 767}, subject = {Energiespeicher}, language = {de} } @incollection{SternerBauer, author = {Sterner, Michael and Bauer, Franz}, title = {Definition und Klassifizierung von Energiespeichern}, series = {Energiespeicher - Bedarf, Technologien, Integration}, booktitle = {Energiespeicher - Bedarf, Technologien, Integration}, edition = {2. Auflage}, publisher = {Springer Vieweg}, address = {Berlin ; Heidelberg}, isbn = {978-3-662-48892-8}, doi = {10.1007/978-3-662-48893-5_2}, pages = {25 -- 49}, subject = {Energiespeicher}, language = {de} } @inproceedings{HopfenspergerDaubnerHerrmannetal., author = {Hopfensperger, Bernhard and Daubner, Andreas and Herrmann, Fabian and Hopkins, Andrew and Mellor, Phil}, title = {Investigation of Shifted PWM Methods for a Dual Three-Phase System to Reduce Capacitor RMS Current}, series = {PCIM Europe Digital Days 2020: International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management: 07.-08.07.2020, Online [proceedings]}, booktitle = {PCIM Europe Digital Days 2020: International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management: 07.-08.07.2020, Online [proceedings]}, publisher = {VDE-Verlag}, address = {Berlin, Offenbach}, isbn = {978-3-8007-5245-4}, pages = {124 -- 131}, abstract = {Mild hybrid automotive topologies containing a 48V high power (>15 kW) electric drive system demand a high integration of power electronics and electrical machine. A multi-phase motor winding topology helps to keep the per-phase operating currents to a reasonable level. Close integration and multi-phase system have led to a drive system with dual 3-phase systems supplied by a common 48V DC-link, which allows to shift PWM patterns for reduction of DC-link capacitor ripple current and size. This paper derives some basic rules for combinations of common PWM methods for dual 3-phase systems without magnetic cross-coupling. Experimental measurements verify simulated results.}, subject = {Elektroantrieb}, language = {en} } @inproceedings{GrauvoglStauderHopfenspergeretal., author = {Grauvogl, Dominik and Stauder, Peter and Hopfensperger, Bernhard and Gerling, Dieter}, title = {Multiphysics Design of a Wound Field Synchronous Machine with Magnetic Asymmetry}, series = {Proceedings of the 2021 IEEE International Electric Machines \& Drives Conference (IEMDC): 17-20 May 2021, Hartford, CT, USA}, booktitle = {Proceedings of the 2021 IEEE International Electric Machines \& Drives Conference (IEMDC): 17-20 May 2021, Hartford, CT, USA}, doi = {10.1109/IEMDC47953.2021.9449564}, abstract = {In this paper a multiphysics development method is used for designing a novel wound field synchronous machine of the future generation of high voltage traction drives. This method covers the domains of electromagnetics, the mechanical strength, thermal behavior and the magnetic noise. It is shown that the proposed novel asymmetric design with a circular flux barrier in combination with an asymmetric pole offset is fulfilling the requirements according to performance and torque ripple. A fatigue strength rotor mechanic concept is included. A hybrid cooling concept consisting of a water jacket cooled stator and air cooled rotor ensures the needed continuous power. Unacceptable noise levels are excluded by investigating the equivalent radiated power (ERP) level due to radial forces in the air gap. Finally, the multi-physical workflow resulted in a fully developed component with a high degree of maturity.}, language = {en} } @inproceedings{GrauvoglKrabinskiStauderetal., author = {Grauvogl, Dominik and Krabinski, Jeffrey and Stauder, Peter and Hopfensperger, Bernhard and Gerling, Dieter}, title = {NVH Comparison of a Novel Wound Field Synchronous Machine with Magnetic Asymmetry with a PSM for a HV Electric Drive}, series = {2021 JSAE Annual Congress (Spring) Proceedings; online meeting (No.76-21)}, booktitle = {2021 JSAE Annual Congress (Spring) Proceedings; online meeting (No.76-21)}, publisher = {JSAE}, abstract = {This paper shows how magnetic noises can be reduced with a wound field synchronous machine (WFSM) with magnetic asymmetry compared to a permanent magnet synchronous machine (PSM), operating at base speed range and full load. In order to reproduce a real noise behavior, the two rotor types are operated in a complete electric drive unit (EDU) consisting of an electric motor, gearbox, inverter and overall housing. In the concept study, the noise characteristics of the two electric machines is evaluated and compared via mechanical finite element method (FEM) simulations using the equivalent radiated power (ERP) level and Campbell diagrams. Furthermore, it is shown that critical frequency orders can already be identified by the analysis of the magnetic force density from the electromagnetic design without computationally intensive ERP calculations. In this context, the ERP investigations have shown that the unique feature of the magnetically asymmetric WFSM is the reduction of the slot harmonics. At the current state of the art, the slot harmonics can only be reduced with a rotor skewing. The disadvantage of this is a reduction in performance and a more expensive production. It is also remarkable that the magnetic asymmetry reduces the slot harmonics more than the rotor skewing in the PSM. In addition, both machines are still considered with a short-pitched stator winding to optimize the overall noise level by reducing the 24th frequency order.}, subject = {Elektroantrieb}, language = {en} } @inproceedings{LangSteinbornSteffensetal., author = {Lang, Christian and Steinborn, Florian and Steffens, Oliver and Lang, Elmar Wolfgang}, title = {Electricity Load Forecasting - An Evaluation of Simple 1D-CNN Network Structures}, series = {International Conference on Time Series and Forecasting (ITISE 2019), Proceedings of Papers Vol. 2, 25-27 September 2019, Granada (Spain)}, booktitle = {International Conference on Time Series and Forecasting (ITISE 2019), Proceedings of Papers Vol. 2, 25-27 September 2019, Granada (Spain)}, isbn = {978-84-17970-78-9}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-16649}, pages = {797 -- 806}, abstract = {This paper presents a convolutional neural network (CNN)which can be used for forecasting electricity load profiles 36 hours intothe future. In contrast to well established CNN architectures, the inputdata is one-dimensional. A parameter scanning of network parameters isconducted in order to gain information about the influence of the kernelsize, number of filters, and dense size. The results show that a goodforecast quality can already be achieved with basic CNN architectures.The method works not only for smooth sum loads of many hundredconsumers, but also for the load of apartment buildings}, language = {en} } @incollection{LangSteinbornSteffensetal., author = {Lang, Christian and Steinborn, Florian and Steffens, Oliver and Lang, Elmar Wolfgang}, title = {Applying a 1D-CNN Network to Electricity Load Forecasting}, series = {Theory and Applications of Time Series Analysis}, booktitle = {Theory and Applications of Time Series Analysis}, editor = {Valenzuela, O. and Rojas, F. and Herrera, L.J. and Pomares, H. and Rojas, I.}, publisher = {Springer}, doi = {10.1007/978-3-030-56219-9_14}, pages = {205 -- 218}, abstract = {This paper presents a convolutional neural network (CNN) which can be used for forecasting electricity load profiles 36 hours into the future. In contrast to well established CNN architectures, the input data is one-dimensional. A parameter scanning of network parameters is conducted in order to gain information about the influence of the kernel size, number of filters and number of nodes. Furthermore, different dropout methods are applied to the CNN and are evaluated. The results show that a good forecast quality can already be achieved with basic CNN architectures, the dropout improves the forecast. The method works not only for smooth sum loads of many hundred consumers, but also for the load of single apartment buildings.}, language = {en} } @inproceedings{KeimNonnLenzetal., author = {Keim, Vincent and Nonn, Aida and Lenz, D. and Brinnel, Viktoria and M{\"u}nstermann, Sebastian}, title = {Simulation of the ductile fracture behaviour of high toughness pipeline steels using combined damage models}, series = {Proceedings of the conference on Technology for future and ageing piplines, Ghent, Belgium}, booktitle = {Proceedings of the conference on Technology for future and ageing piplines, Ghent, Belgium}, language = {en} } @inproceedings{ArrietaCastroWeberRill, author = {Arrieta Castro, Abel and Weber, Hans Ingo and Rill, Georg}, title = {Design an integrate vehicle control based-on hierarchical architecture for improve the performance of ground vehicles}, series = {COBEM2015 : 23rd ABCM International Congress of Mechanical Engineering, December 6-11, 2015, Rio de Janeiro, RJ, Brazi}, booktitle = {COBEM2015 : 23rd ABCM International Congress of Mechanical Engineering, December 6-11, 2015, Rio de Janeiro, RJ, Brazi}, organization = {Associa{\c{c}}{\~a}o Brasileira de Engenharia e Ci{\^e}ncias Mec{\^a}nicas}, doi = {10.20906/cps/cob-2015-1970}, language = {en} } @inproceedings{DessortChucholowskiRill, author = {Dessort, Ronnie and Chucholowski, Cornelius and Rill, Georg}, title = {Parametrical approach for modeling of tire forces and torques in TMeasy 5}, series = {16. Internationales Stuttgarter Symposium, Automobil- und Motorentechnik, Bd. 1}, booktitle = {16. Internationales Stuttgarter Symposium, Automobil- und Motorentechnik, Bd. 1}, editor = {Bargende, Michael and Reuss, Hans-Christian and Wiedemann, Jochen}, publisher = {Springer}, address = {Wiesbaden}, isbn = {978-3-658-13254-5}, doi = {10.1007/978-3-658-13255-2_31}, pages = {435 -- 449}, abstract = {For the dynamic simulation of on-road vehicles, the model-element "tire/road" is of special importance, according to its influence on the achievable results. Sufficient description of the interaction between tire and road is one of the most challenging tasks of vehicle modeling. Two groups of tire models can be classified: handling models and structural or high-frequency models. Usually, various assumptions are made in modeling vehicles as multibody systems. Therefore, in the interest of balanced modeling, the precision of the complete vehicle model should stand in reasonable relation to the performance of the applied tire model. Handling tire models are characterized by a useful compromise between user friendliness, model complexity, and efficiency in computation time on the one hand, and precision in representation on the other hand.}, language = {en} }