@inproceedings{CarrilloLiSchorrKaufholdetal., author = {Carrillo Li, Enrique Roberto and Schorr, Philipp and Kaufhold, Tobias and Rodr{\´i}guez Hern{\´a}ndez, Jorge Antonio and Zentner, Lena and Zimmermann, Klaus and B{\"o}hm, Valter}, title = {Kinematic analysis of the rolling locomotion of mobile robots based on tensegrity structures with spatially curved compressed components}, series = {Applicable Solutions in Non-Linear Dynamical Systems; 15th International Conference "Dynamical Systems - Theory and Applications" (DSTA 2019, 2-5 December, 2019, Lodz, Poland}, booktitle = {Applicable Solutions in Non-Linear Dynamical Systems; 15th International Conference "Dynamical Systems - Theory and Applications" (DSTA 2019, 2-5 December, 2019, Lodz, Poland}, editor = {Awrejcewicz, Jan and Ka{\'{z}}mierczak, Markek and Olejnik, Paweł}, publisher = {Wydawnictwo Politechniki Ł{\´o}dzkiej}, address = {Ł{\´o}d{\'{z}}, Polen}, isbn = {978-83-66287-30-3}, pages = {335 -- 344}, abstract = {In this work, a tensegrity structure with spatially curved members is applied as rolling locomotion system. The actuation of the structure allows a variation of the originally cylindrical shape to a conical shape. Moreover, the structure is equipped with internal movable masses to control the position of the center of mass of the structure. To control the locomotion system a reliable actuation strategy is required. Therefore, the kinematics of the system considering the nonholonomic constraints are derived in this paper. Based on the resulting insight in the locomotion behavior a feasible actuation strategy is designed to control the trajectory of the system. To verify this approach kinematic analyses are evaluated numerically. The simulation data confirm the path following due to an appropriate shape change of the tensegrity structure. Thus, this system enables a two-dimensional rolling locomotion. The use of mechanically compliant tensegrity structures in mobile robots is an attractive research topic, due to the possibility to adjust their mechanical properties reversibly during locomotion. In this paper rolling locomotion of mobile robots based on simple tensegrity structures, consisting of three compressed spatially curved members connected to a continuous net of prestressed tensional members, is discussed. Planar locomotion of these robots is induced by the movement of internal masses. The movement direction can be changed by changing the robot's shape between a cylinder and a truncated cone. The paper focuses on the description of the kinematics of these systems with respect to the shape change.}, language = {en} } @article{KeimNonnMuenstermann, author = {Keim, Vincent and Nonn, Aida and M{\"u}nstermann, Sebastian}, title = {Application of the modified Bai-Wierzbicki model for the prediction of ductile fracture in pipelines}, series = {International Journal of Pressure Vessels and Piping}, volume = {171}, journal = {International Journal of Pressure Vessels and Piping}, number = {March}, publisher = {Elsevier}, doi = {10.1016/j.ijpvp.2019.02.010}, pages = {104 -- 116}, abstract = {The complex mechanical and corrosive loads of modern pipeline systems transporting oil, natural gas and CO2 impose steadily increasing requirements on material properties. The majority of current design standards still limit the application of modern high toughness linepipe steels due to the simple specification of material requirements in terms of energy levels from Charpy impact or Battelle Drop-Weight-Tear (BDWT) tests. In consequence, research activities have been conducted recently aiming at developing modified or novel experimental methods for the characterization of the ductile fracture behavior. To quantify the effects of various parameters on fracture behavior and derive suitable correlations, it is necessary to accompany these activities by numerical simulations with appropriate ductile damage models. In this paper, the MBW model is applied to study the structural behavior of pipelines in ductile fracture regime. Due to its precise incorporation of the underlying load conditions, the damage model is successfully used to simulate the slant fracture behavior in Battelle Drop weight tear test specimens and pipe sections. In comparison to ductile damage models applied in former studies, namely the Gurson-Tvergaard-Needleman and Cohesive Zone model, the presented numerical methodology allows for a more detailed investigation of loading, material and geometry effects on fracture and crack arrest behavior of pipelines.}, language = {en} } @techreport{SternerBauerHofrichteretal., author = {Sterner, Michael and Bauer, Franz and Hofrichter, Andreas and Heberl, Michael}, title = {Systemanalyse und -integration Power-to-X im Kontext von erneuerbarer Elektrizit{\"a}t als Prim{\"a}renergie (SPIKE)}, pages = {87}, abstract = {Durch das in Paris beschlossene Ziel, die globale mittlere Temperatur auf deutlich unter 2 Grad Celsius gegen{\"u}ber dem vorindustriellen Niveau zu begrenzen, ist ein Ausstieg aus der Nutzung fossiler Energietr{\"a}ger und Rohstoffe bis zum Jahr 2050 notwendig (WBGU 2016). Daher hat sich die Bundesregierung das Ziel gesetzt, bis zur Mitte des Jahrhunderts eine weitgehende Treibhausgasneutralit{\"a}t zu erreichen. Hierzu ist neben einer Steigerung der Energieeffizienz in allen Sektoren ein Ausbau erneuerbaren Energien notwendig. Dies beinhaltet haupts{\"a}chlich den Zubau von Wind- und Solarstromanlagen. Somit gewinnt die Sektorkopplung immer mehr an Bedeutung und wird in Zukunft eine tragende Rolle f{\"u}r die Defossilisierung des Energiesystems spielen (BMUB 2016). Als zentrales Element der Sektorkopplung gilt Strom, der {\"u}ber Power-to-X (PtX) sowohl energetisch im W{\"a}rme-, und Verkehrssektor als auch stofflich in der Industrie und vor allem im Chemiesektor eingesetzt werden kann (Ausfelder et al. 2018a). Im Rahmen des P2X-Vorhabens der Kopernikus Forschungsinitiative wird die Sektorkopplung durch die Umwandlung von Strom mittels elektrochemischer Prozesse in stoffliche Ressourcen wie Wasserstoff, Synthesegas oder Kohlenstoffmonoxid untersucht. Der Schwerpunkt liegt auf der Betrachtung der Kopplung von Strom und Verkehr sowie Strom und Chemie und der Untersuchung von Prozessen und Pfaden, die aus {\"o}kologischer, {\"o}konomischer und gesellschaftlicher Sicht vorteilhaft sind. Eine vergleichende Einordnung in den Gesamtkontext der Energiewende mit Abw{\"a}gung zahlreicher Alternativen und Konkurrenztechnologien ist dort allerdings nicht vorgesehen. Zudem werden einige relevante PtX-Technologien wie Power-to-Heat nicht betrachtet. Aus diesem Grund wurden in SPIKE erg{\"a}nzende PtX-Technologiepfade aus systemanalytischer Sicht untersucht. Dies sind Power-to-Heat (PtH) und Power-to-Gas (PtG) {\"u}ber Elektrolyse und optionaler anschließender Methanisierung sowie die Herstellung ausgew{\"a}hlter Pfade der strombasierten Herstellung von Produkten der energieintensiven Industrie. Ziel des Forschungsvorhabens war die Analyse von PtX-Technologien und Pfaden, deren vergleichende Einordnung im Gesamtkontext der Energiewende sowie die Unterst{\"u}tzung des P2X Roadmapping Prozesses und die Ableitung von Handlungsempfehlungen. Ein besonderer Schwerpunkt lag auf dem Einsatz von PtX im Industriesektor. F{\"u}r das Vorhaben wurden Arbeitspakete (AP) erstellt, die Untersuchungen zu Technologie, Potenzial, {\"O}konomie und {\"O}kologie von PtH (AP 1), PtG (AP 2), Power-to-Ammoniak, Power-to-Ethen und Power-to-Propen (AP 3) umfassten. Daraus wurde in AP 4 ein Systemvergleich mit Einordnung von PtX in die Energiewende durchgef{\"u}hrt. Auf dieser Basis und der Identifizierung regulatorischer Rahmenbedingungen f{\"u}r PtX (AP 5) wurde das deutsche Energiesystem samt PtX-Pfaden in einem Energiesystemmodell abgebildet (AP 6). Die Ergebnisse flossen in das Roadmapping ein (AP 7). Zudem erfolgte ein Austausch mit den Projektpartnern und das Verfassen wissenschaftlicher Abhandlungen (AP 8).}, language = {de} } @article{SavelievFetisovChashinetal., author = {Saveliev, Dmitry V. and Fetisov, Leonid Y. and Chashin, Dmitri V. and Shabin, P. A. and Vyunik, D. A. and Fedulov, Feodor and Kettl, W. and Shamonin (Chamonine), Mikhail}, title = {Method of Measuring Deformations of Magnetoactive Elastomers under the Action of Magnetic Fields}, series = {Russian Technological Journal}, volume = {7}, journal = {Russian Technological Journal}, number = {4}, doi = {10.32362/2500-316x-2019-7-4-81-91}, pages = {81 -- 91}, language = {ru} } @article{KlenkGalka, author = {Klenk, Eva Marianne and Galka, Stefan}, title = {Analysis of real-time tour building and scheduling strategies for in-plant milk-run systems with volatile transportation demand}, series = {IFAC - PapersOnLine}, volume = {52}, journal = {IFAC - PapersOnLine}, number = {13}, publisher = {Elsevier}, doi = {10.1016/j.ifacol.2019.11.517}, pages = {2110 -- 2115}, abstract = {In modern manufacturing systems, milk run (MR) systems represent route-based, cyclic material-handling systems that are used widely and enable frequent deliveries of containerized parts in small lot sizes from a central storage area to multiple points of use on the factory floor. Usually, deliveries take place at predetermined, constant time intervals. As in real-world MR systems, the number of containers to deliver in each interval varies in the short term, peaks in the number of deliveries may lead to capacity bottlenecks and late deliveries. In this paper, we develop three alternative strategies to determine starting times of MR cycles in real-time based on the current number of delivery orders in the system aiming to better handle variations in the number of orders. We evaluate the three strategies for different system load scenarios with respect to delivery service levels, order lead times, systems utilization and necessary number of MR trains using a discrete-event simulation model.}, language = {en} } @misc{AltmannGebhard, author = {Altmann, Robert and Gebhard, J{\"u}rgen}, title = {Ph{\"a}nomenologische Untersuchung des Einspritzprozesses eines Injektors aus dem Off-Highway-Segment mit Diesel- und Raps{\"o}lkraftstoff}, series = {16. Internationaler Fachkongress "Kraftstoffe der Zukunft 2019", Berlin}, journal = {16. Internationaler Fachkongress "Kraftstoffe der Zukunft 2019", Berlin}, language = {de} } @article{Rill, author = {Rill, Georg}, title = {Sophisticated but quite simple contact calculation for handling tire models}, series = {Multibody system dynamics}, volume = {45}, journal = {Multibody system dynamics}, number = {2}, publisher = {Springer Nature}, organization = {SPRINGER}, doi = {10.1007/s11044-018-9629-4}, pages = {131 -- 153}, abstract = {Handling tire models like Pacejka (Tire and Vehicle Dynamics, 3rd edn., Elsevier, Amsterdam, 2012) or TMeasy (Rill in Proc. of the XV Int. Symp. on Dynamic Problems of Mechanics, Buzios, RJ, Brazil, 2013) consider the contact patch as one coherent plane. As a consequence, the irregularities of a rough road profile must be approximated by an appropriate local road plane that serves as an effective road plane in order to calculate the geometric contact point and the corresponding contact velocities. The Pacejka/SWIFT tire model employs a road enveloping model that generates the effective height and slope by elliptical cams. TMeasy just uses four representative road points for that purpose. In addition, TMeasy replaces the geometric contact point by the static contact point and shifts it finally to the dynamic contact point that represents the point where the contact forces are applied. In doing so, a rather sophisticated but still simple contact calculation is possible. Simulations obtained with a virtual tire test rig and fully nonlinear three-dimensional multibody system models of a motor-scooter and a passenger car demonstrate the potential of this contact approach.}, language = {en} } @inproceedings{RillArrietaCastro, author = {Rill, Georg and Arrieta Castro, Abel}, title = {The Influence of Axle Kinematics on Vehicle Dynamics}, series = {Interdisciplinary Applications of Kinematics. Proceedings of the Third International Conference (IAK)}, volume = {71}, booktitle = {Interdisciplinary Applications of Kinematics. Proceedings of the Third International Conference (IAK)}, editor = {Kecskem{\´e}thy, Andr{\´e}s and Geu Flores, Francisco and Carrera, Eliodoro and Elias, Dante A.}, publisher = {Springer International Publishing}, address = {Cham}, isbn = {978-3-030-16422-5}, doi = {10.1007/978-3-030-16423-2_2}, pages = {23 -- 31}, abstract = {The automotive industry employs many different kinds of axle suspension systems at modern passenger cars. Important criteria are costs, space requirements, kinematic properties, and compliance attributes. This paper illustrates that in particular the kinematic properties of a suspension system have a significant influence on the dynamics of vehicles. As a consequence, the kinematics of a suspension system must be modeled very precisely and nonlinear. Typical kinematical features of a suspension system are discussed by analyzing the most common double wishbone axle suspension system. The influence of the axle kinematics on vehicle dynamics is finally demonstrated by simulation results generated with a fully nonlinear and three-dimensional multibody vehicle model.}, language = {en} } @incollection{Rill, author = {Rill, Georg}, title = {Multibody Systems and Simulation Techniques}, series = {Vehicle Dynamics of Modern Passenger Cars}, booktitle = {Vehicle Dynamics of Modern Passenger Cars}, editor = {Lugner, Peter}, publisher = {Springer International Publishing}, address = {Cham}, isbn = {978-3-319-79007-7}, doi = {10.1007/978-3-319-79008-4_6}, pages = {309 -- 375}, abstract = {This part begins with an introduction to Multibody Systems (MBS). It presents the elements of MBS and discusses different modeling aspects. Then, different methods to generate the equations of motion are presented. Solvers for ordinary differential equations (ODE) as well as differential algebraic equations (DAE) are discussed. Finally, techniques for "online" and "offline" simulations including real-time applications are presented like necessary for car development. Special examples show the connection between simulation and test results.}, language = {en} } @inproceedings{ArrietaCastroChavesRilletal., author = {Arrieta Castro, Abel and Chaves, Rafael B. and Rill, Georg and Weber, Hans I.}, title = {Use of Integrated Control to Enhance the Safety of Vehicles in Run-Off-Road Scenarios}, series = {Proceedings of DINAME 2017 : Selected Papers of the XVII International Symposium on Dynamic Problems of Mechanics}, booktitle = {Proceedings of DINAME 2017 : Selected Papers of the XVII International Symposium on Dynamic Problems of Mechanics}, editor = {Fleury, Agenor de T. and Rade, Domingos A. and Kurka, R. G.}, edition = {1. Auflage}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-91217-2}, issn = {2195-4356}, doi = {10.1007/978-3-319-91217-2_30}, pages = {431 -- 443}, abstract = {In this work, an integrated vehicle control system (IC) is tested in run-off-road scenarios. The integrated approach was employed in order to coordinate vehicle control systems, i.e. the Anti-Lock Brake System (ABS), Four-wheel Steering (4WS) and the Electronic Stability Program (ESP). To perform a run-off-road maneuver, a fuzzy virtual test driver was designed. By receiving the lateral position of an obstacle and the vehicle's relative yaw angle, the virtual test driver is capable of following a reference trajectory. Furthermore, to test the performance of the standalone controllers, i.e. ABS, ESP and 4WS, individual maneuvers are performed using a multibody vehicle model. The vehicle without any coordination between the control systems is used as reference. For the simulation results, it is concluded that the IC improves the vehicle stability and maneuverability in comparison with the non-integrated approach.}, language = {en} } @article{ThemaBauerSterner, author = {Thema, Martin and Bauer, Franz and Sterner, Michael}, title = {Power-to-Gas: Electrolysis and methanation status review}, series = {Renewable and Sustainable Energy Reviews}, volume = {112}, journal = {Renewable and Sustainable Energy Reviews}, number = {7}, publisher = {Elsevier}, doi = {10.1016/j.rser.2019.06.030}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-26238}, pages = {775 -- 787}, abstract = {This review gives a worldwide overview on Power-to-Gas projects producing hydrogen or renewable substitute natural gas focusing projects in central Europe. It deepens and completes the content of previous reviews by including hitherto unreviewed projects and by combining project names with details such as plant location. It is based on data from 153 completed, recent and planned projects since 1988 which were evaluated with regards to plant allocation, installed power development, plant size, shares and amounts of hydrogen or substitute natural gas producing examinations and product utilization phases. Cost development for electrolysis and carbon dioxide methanation was analyzed and a projection until 2030 is given with an outlook to 2050. The results show substantial cost reductions for electrolysis as well as for methanation during the recent years and a further price decline to less than 500 euro per kilowatt electric power input for both technologies until 2050 is estimated if cost projection follows the current trend. Most of the projects examined are located in Germany, Denmark, the United States of America and Canada. Following an exponential global trend to increase installed power, today's Power-to-Gas applications are operated at about 39 megawatt. Hydrogen and substitute natural gas were investigated on equal terms concerning the number of projects.}, language = {en} } @inproceedings{DeNiklasRooneyetal., author = {De, Sangita and Niklas, Michael and Rooney, Brian and Mottok, J{\"u}rgen and Brada, Premek}, title = {Towards Translation of Semantics of Automotive Interface Description Models from Franca to AUTOSAR Frameworks}, series = {2019 International Conference on Applied Electronics (AE), 10-11 Sept. 2019, Pilsen, Czech Republic}, booktitle = {2019 International Conference on Applied Electronics (AE), 10-11 Sept. 2019, Pilsen, Czech Republic}, publisher = {University of West Bohemia}, doi = {10.23919/AE.2019.8867018}, pages = {1 -- 6}, abstract = {The automotive industry is eventually evolving into a complex network of services. The heterogeneous and distributed nature of automotive software systems demands flexible software components which can operate in different environments. Because of heterogeneous automotive development environments, the domain experts, must cope with too many diversities, adaption layers, and incompatibilities to design applications for the current generation of autonomous driving vehicles. In this context, interface adaptation is a promising approach to achieve flexibility without directly changing the respective components. AUTOSAR, which is the de-facto standard for describing automotive system architecture and is a hugely comprehensive standard allowing designers full control from abstract system description to bare metal level deployment. However, the vehicle subsystems have still evolved to include multifarious high-level domains not covered by AUTOSAR e.g. Infotainment, Telematics etc. Therefore, it seems beneficial to bridge the semantic gaps between AUTOSAR applications and other standards of automotive application domains. The goal of this paper is to investigate interface semantic mapping and achieve transparent integration of domain-specific applications using the translation of semantics among the AUTOSAR platform software component models and other software components models of open source development platforms e.g. GENIVI. A key goal of such a modelling approach is the reuse of existing interface description languages and respective code generators. This will enhance future interoperability and decrease in incompatibility among these platforms.}, language = {en} } @inproceedings{DeNiklasMottoketal., author = {De, Sangita and Niklas, Michael and Mottok, J{\"u}rgen and Brada, Přemek}, title = {A Semantic Analysis of Interface Description Models of Heterogeneous Vehicle Application Frameworks: An Approach Towards Synergy Exploration}, series = {MODELSWARD 2019: Proceedings of the 7th International Conference on Model-Driven Engineering and Software Development, 20.02.2019 - 22.02.2019, Prague, Czech Republic}, booktitle = {MODELSWARD 2019: Proceedings of the 7th International Conference on Model-Driven Engineering and Software Development, 20.02.2019 - 22.02.2019, Prague, Czech Republic}, publisher = {SCITEPRESS}, isbn = {978-989-758-358-2}, pages = {394 -- 401}, abstract = {As the world is getting more connected, the demands of services in automotive industry are increasing with the requirements such as IoT (Internet of Things) in cars, automated driving, etc. Eventually, the automotive industry has evolved to a complex network of servi ces, where each organization depends on the other organizations, to satisfy its service requirements in different phases of the vehicle life cycle. Because of these heterogeneous and complex development environments, most of the vehicle component interface models need to be specified in various manifest ations to satisfy the semantic and syntactic requirements, specific to different application development environments or frameworks. This paperdescribes an approach to semantic analysis of components interfaces description models of heterogeneous frameworks, that are used for vehicle applications. The proposed approach intends to ensure that interface description models of different service-based vehicle frameworks can be compared, correlated and re-used based on semantic synergies, across different vehicle platforms, development environments and organizations. The approach to semantic synergy exploration could further provide the knowledge base for the increase in interoperability, overall efficiency and development of an automotive domain specific general software solutions, by facilitating coexistence of components of heterogeneous frameworks in the same high-performance ECU for future vehicle software.}, language = {en} } @misc{OPUS4-6543, title = {Energieforschung}, edition = {Ausgabe 2020}, publisher = {OTH Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg / Regensburg Center of Energy and Resources (RCER)}, doi = {10.35096/othr/pub-6543}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-65439}, abstract = {{\"U}ber uns Das Regensburg Center of Energy and Resources (RCER) b{\"u}ndelt seit 2012 die Aktivit{\"a}ten der Ostbayerischen Technischen Hochschule Regensburg (OTH Regensburg) und der regionalen Wirtschaftsunternehmen auf dem Strategiefeld „Energie und Ressourcen". Mission: Energieforschung: vernetzen, voranbringen, vermitteln Das RCER f{\"o}rdert die Vernetzung verschiedener Disziplinen der Energieforschung innerhalb der OTH Regensburg und mit externen Partnern (Firmen, F{\"o}rdertr{\"a}gern, Forschungsinstitutionen, {\"o}ffentlichen Einrichtungen). Das RCER ist Ihr Partner beim Voranbringen von Kooperationen und Forschungsvorhaben durch Unterst{\"u}tzung in der Antragsphase, bei der Einwerbung von Projektmitteln und Projektbegleitung im Energiebereich. Das RCER steht f{\"u}r die Vermittlung von Know-how, Basiswissen, aktuellen Fragen und den Technologietransfer rund um das Thema Energie zwischen Wissenschaft, Wirtschaft, Gesellschaft und Politik. Vision Wir sind Ihr erster Ansprechpartner und Motor f{\"u}r innovative Energieforschung. Werte Verl{\"a}sslichkeit, Kompetenz, Verantwortungsbewusstsein.Regional verwurzelt und weltoffen}, language = {de} } @inproceedings{ThomeczekAttenbergerKolbetal., author = {Thomeczek, Ludwig and Attenberger, Andreas and Kolb, Johannes and Matoušek, V{\´a}clav and Mottok, J{\"u}rgen}, title = {Betrachtungen zu Latenzquellen und deren Beobachtung in POSIX-Systemen am Beispiel von Container-Runtimes}, series = {Echtzeit 2019}, volume = {35}, booktitle = {Echtzeit 2019}, editor = {Unger, Herwig}, publisher = {Springer Fachmedien Wiesbaden}, address = {Wiesbaden}, isbn = {978-3-658-27807-6}, doi = {10.1007/978-3-658-27808-3_12}, pages = {109 -- 118}, abstract = {Die am weitesten verbreiteten autonomen Systeme der Zukunft sind aller Voraussicht nach intelligente Fahrzeuge, welche selbst{\"a}ndig im Straßenverkehr navigieren und mit der Umgebung interagieren. Diese neuen Funktionen erfordern den Einsatz von performanten Mehrkernprozessoren sowie von komplexen (POSIX-kompatiblen) Betriebssystemen. Gleichzeitig erfordert der Einsatz im Automobil hohe funktionale Sicherheit (ASIL-Level), was unter anderem robuste Echtzeiteigenschaften der verwendeten Hard- und Software voraussetzt. Den Echtzeiteigenschaften steht die erh{\"o}hte Komplexit{\"a}t mit neuen Quellen f{\"u}r nichtdeterministische Latenzen gegen{\"u}ber. In diesem Paper pr{\"a}sentieren wir eine {\"U}bersicht {\"u}ber diese neuen Einflussfaktoren, und vermessen anschließend Containerlaufzeitumgebungen und deren Latenzverhalten. Wir zeigen dabei, das Netzwerkbr{\"u}cken unter Last erheblichen Einfluss (Faktor 4-5) auf die Netzwerklatenz aus{\"u}ben k{\"o}nnen.}, language = {de} } @inproceedings{KrausBrueckl, author = {Kraus, Hermann and Br{\"u}ckl, Oliver}, title = {Automated use of wired measures in grid planning for solving current and voltage band problems}, series = {Power and Energy Student Summit (PESS) 2019, Magdeburg}, volume = {77}, booktitle = {Power and Energy Student Summit (PESS) 2019, Magdeburg}, publisher = {Otto-von-Guericke-Universit{\"a}t, Institut f{\"u}r Elektrische Energiesysteme}, address = {Magdeburg}, isbn = {978-3-944722-84-9}, doi = {10.24352/UB.OVGU-2019-086}, pages = {207 -- 211}, abstract = {This work deals with the use of cable exchange and parallel cabling as network expansion measures in the context of an automated grid planning for the elimination of current and voltage band problems in a distribution network. Inter alia, reference is made to a higher-level program, which is being developed in the EU project "CrossEnergy", and the procedures for remedying the limit value violations are presented.}, subject = {Netzplanung}, language = {en} } @article{KeinerRamBarbosaetal., author = {Keiner, Dominik and Ram, Manish and Barbosa, Larissa de Souza Noel Simas and Bogdanov, Dmitrii and Breyer, Christian}, title = {Cost optimal self-consumption of PV prosumers with stationary batteries, heat pumps, thermal energy storage and electric vehicles across the world up to 2050}, series = {Solar Energy}, volume = {185}, journal = {Solar Energy}, publisher = {Elsevier}, doi = {10.1016/j.solener.2019.04.081}, pages = {406 -- 423}, abstract = {Globally, PV prosumers account for a significant share of the total installed solar PV capacity, which is a growing trend with ever-increasing retail electricity prices. Further propelled by performance improvements of solar PV and innovations that allow for greater consumer choice, with additional benefits such as cost reductions and availability of incentives. PV prosumers may be one of the most important enablers of the energy transition. PV prosumers are set to gain the most by maximising self-consumption, while avoiding large amounts of excess electricity being fed into the grid. Additionally, electricity and heat storage technologies, heat pumps and battery electric vehicles are complementary to achieve the highest possible self-consumption shares for residential PV prosumer systems, which can reach grid-parity within this decade in most regions of the world. This research finds the cost optimal mix of the various complementary technologies such as batteries, electric vehicles, heat pumps and thermal heat storage for PV prosumers across the world by exploring 4 different scenarios. Furthermore, the research presents the threshold for economical maximum battery capacity per installed PV capacity, along with self-consumption ratios, demand cover ratios and heat cover ratios for 145 different regions across the world. This is a first of its kind study to conduct a global analysis of PV prosumers with a range of options to meet their complete energy demand from a future perspective, up to 2050. Maximising self-consumption from solar PV generation to meet all energy needs will be the most economical option in the future, for households across most regions of the world.}, language = {en} } @inproceedings{RoeselKoehler, author = {R{\"o}sel, Birgit and K{\"o}hler, Thomas}, title = {First results of a new digitalized concept for teaching control theory as minor subject at a university of applied science}, series = {2018 IEEE Global Engineering Education Conference (EDUCON), 17-20 April 2018, Santa Cruz de Tenerife, Spain}, booktitle = {2018 IEEE Global Engineering Education Conference (EDUCON), 17-20 April 2018, Santa Cruz de Tenerife, Spain}, publisher = {IEEE}, doi = {10.1109/EDUCON.2018.8363217}, pages = {118 -- 125}, abstract = {This paper presents a digitalized concept for teaching control theory as minor subject with an integrated approach for lectures, exercises and practical sessions and first results of the implementation at the department of electrical engineering at the OTH Regensburg. The concept uses activating methods like blended learning and possibilities of digitalization of teaching implementing Just in Time Teaching and Peer Instruction. The base of the new concept is the idea of constructive alignment. Furthermore this paper presents the feedback of the students along with an accompanying scientific research over several semesters. The data obtained from the presented module are compared with the data from other blended learning approaches in Germany.}, language = {en} } @article{SykoraHolickyJungetal., author = {S{\´y}kora, Miroslav and Holicky, Milan and Jung, Karel and Diamantidis, Dimitris}, title = {Human safety criteria for risk-based structural design}, series = {International Journal of Safety and Security Engineering}, volume = {8}, journal = {International Journal of Safety and Security Engineering}, number = {2}, publisher = {WIT Press}, doi = {10.2495/SAFE-V8-N2-287-298}, pages = {287 -- 298}, abstract = {Risk and reliability criteria are well established in many industrial sectors such as the offshore, chemi- cal or nuclear industries. Comparative risk thresholds have been specified to allow a responsible organization or regulator to identify activities, which impose an acceptable level of risk concerning the participating individuals, or society as a whole. The scope of this contribution is to present target reliability criteria based on acceptable human safety levels. Application of theoretical principles is illustrated by examples of railway engineering structures. Initially it is shown how civil engineering structures for which human safety criteria play a role are classified according to Eurocodes. Examples include bridges, tunnels or station buildings. The general concepts for risk acceptance are then briefly reviewed, particularly in their relation to the target reliability criteria. The distinction between the two types of criteria is made: group risk and the acceptance criterion based on the Life Quality Index LQI approach introduced by ISO 2394:2015. The differences between the criteria for new and existing structures are discussed. The application is illustrated by an example of a bridge crossing an important railway line. It appears that while benefits and costs of a private stakeholder or public authority are reflected by economic optimisation, the society should define the limits for human safety to achieve uniform risks for various daily-life activities and across different industrial sectors. Keywords: group risk, human safety, individual risk, Life Quality Index, railway, risk acceptance, structure, target reliability}, language = {en} } @article{DiamantidisSykoraLenzi, author = {Diamantidis, Dimitris and S{\´y}kora, Miroslav and Lenzi, Daniele}, title = {Optimising Monitoring: Standards, Reliability Basis and Application to Assessment of Roof Snow Load Risks}, series = {Structural Engineering International}, volume = {28}, journal = {Structural Engineering International}, number = {3}, publisher = {Taylor\&Francis}, doi = {10.1080/10168664.2018.1462131}, pages = {269 -- 279}, abstract = {This paper addresses the optimisation of monitoring and decision-making criteria regarding the future use of structures. The current state of practice in standards and reliability framework are initially summarised. A general methodology for obtaining cost-optimal decisions is then presented on the basis of limit state design, probabilistic reliability analysis and cost estimates. The implementation of the risk-based approach is illustrated in a case study dealing with the roof of a stadium located in northern Italy. As the roof fails to comply with the requirements of the Eurocodes, the installation of a permanent monitoring system is recommended to allow for a real-time reliability assessment. The results demonstrate the potential of monitoring systems and probabilistic reliability analysis for supporting decisions regarding safety measures such as snow removal or temporary closure of the stadium, as well as reflecting the need to implement the discussed procedures in future standards.}, language = {en} }