@inproceedings{SchneiderHotsLuftetal., author = {Schneider, Sebastian and Hots, Jan and Luft, Tommy and Rottengruber, Hermann and Verhey, Jesko L. and Rabl, Hans-Peter}, title = {Entwicklung einer empirischen Formel zur Bewertung der Tickerger{\"a}uschanteile von Motorger{\"a}uschen}, series = {DAGA 2019 - 45. Jahrestagung f{\"u}r Akustik, 8.-21. M{\"a}rz 2019, Rostock}, volume = {45}, booktitle = {DAGA 2019 - 45. Jahrestagung f{\"u}r Akustik, 8.-21. M{\"a}rz 2019, Rostock}, publisher = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, isbn = {978-3-939296-14-0}, pages = {643 -- 646}, language = {de} } @inproceedings{RiegerMuehlbauerWeberetal., author = {Rieger, Anna and M{\"u}hlbauer, Christian and Weber, Rainer and Rabl, Hans-Peter}, title = {Measures to Address the Dissonance Perception of Multiple Tonal Components in Sounds}, series = {DAGA 2019 - 45. Jahrestagung f{\"u}r Akustik, 18.-21. M{\"a}rz 2019, Rostock}, volume = {45}, booktitle = {DAGA 2019 - 45. Jahrestagung f{\"u}r Akustik, 18.-21. M{\"a}rz 2019, Rostock}, publisher = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, pages = {375 -- 378}, language = {en} } @misc{SchwanzerDietrichGadereretal., author = {Schwanzer, Peter and Dietrich, Markus and Gaderer, Matthias and Rabl, Hans-Peter}, title = {Monitoring von Partikelfiltern f{\"u}r den Einsatz in Fahrzeugen mit direkt- einspritzenden Ottomotoren mit einer Radio-Frequenz (RF-) Antenne}, series = {Kolloquium des Bayerischen Wissenschaftsforum}, journal = {Kolloquium des Bayerischen Wissenschaftsforum}, language = {de} } @misc{SchwanzerDietrichHaftetal., author = {Schwanzer, Peter and Dietrich, Markus and Haft, Gerhard and Gaderer, Matthias and Rabl, Hans-Peter}, title = {Oxidation Kinetics Determination of GDI Engine Soot by a Radio-Frequency Sensor}, series = {23rd Conference on Combustion Generated Nanoparticles 2019, June 17-20, Z{\"u}rich, Switzerland}, journal = {23rd Conference on Combustion Generated Nanoparticles 2019, June 17-20, Z{\"u}rich, Switzerland}, language = {en} } @article{BraunRablMatysik, author = {Braun, Peter and Rabl, Hans-Peter and Matysik, Frank-Michael}, title = {Investigations on the Liquid-Phase Decomposition of AdBlue Urea for the Selective Catalytic Reduction Process}, series = {Chemie Ingenieur Technik}, volume = {91}, journal = {Chemie Ingenieur Technik}, number = {7}, publisher = {Wiley}, doi = {10.1002/cite.201800055}, pages = {961 -- 968}, abstract = {Difficulties in decomposing AdBlue to ammonia limit the applicability of selective catalytic reduction systems at low exhaust temperatures. Investigations on the decomposition of AdBlue in the liquid phase under elevated pressure at temperatures up to 165 degrees C were carried out. Besides effects of inorganic catalysts, the impact of pH on urea decomposition was examined. After dissolution in aqueous phase, the compounds ZnO, WO3, and MoO3 were found to be effective in liquid-phase AdBlue decomposition. However, the efficiency was dropping significantly over few hours. Decomposition of AdBlue urea was also found to be favored for alkaline and acidic conditions.}, language = {en} } @article{BraunDurnerRabletal., author = {Braun, Peter and Durner, Bernhard and Rabl, Hans-Peter and Matysik, Frank-Michael}, title = {Investigations on the decomposition of AdBlue urea in the liquid phase at low temperatures by an electrochemically induced pH shift}, series = {Monatshefte f{\"u}r Chemie}, volume = {150}, journal = {Monatshefte f{\"u}r Chemie}, number = {9}, publisher = {Springer}, doi = {10.1007/s00706-019-02406-6}, pages = {1633 -- 1641}, abstract = {Ammonia-based selective catalytic reduction (SCR) systems are the most widely used technology for reduction of nitrogen oxide emissions from lean-burn engines such as diesel engines. However, at low exhaust temperatures, the SCR process is limited by difficulties in the decomposition of the ammonia precursor urea, which is carried on-board using an aqueous solution "AdBlue". In this study, the decomposition of AdBlue urea induced by electrical current and the resulting associated pH shifts were investigated in a divided cell configuration in the liquid phase. The decomposition was found to be favored in both electrochemical compartments, anodic and cathodic, at temperatures of 60-80 degrees C compared to a reference without electrochemical treatment. In addition to the determination of ammonia contents using an ammonia sensor, IC/HPLC analyses were carried out for each sample. Different side products such as biuret, nitrate, cyanuric acid, ammelide, and others were formed. In the anodic compartment, nitrate formation could be observed due to oxidation of ammonia at the electrode surface. [GRAPHICS] .}, language = {en} } @article{SchwanzerRablLodersetal., author = {Schwanzer, Peter and Rabl, Hans-Peter and Loders, S. and Seifert, P. and Himmelstoss, S. and Gaderer, Matthias}, title = {Difference in the Tailpipe Particle Number by Consideration of Sub-23-nm Particles for Different Injection Settings of a GDI Engine}, series = {Emission control science and technology}, volume = {5}, journal = {Emission control science and technology}, number = {1}, publisher = {Springer Nature}, doi = {10.1007/s40825-019-0114-1}, pages = {7 -- 22}, abstract = {The purpose of this study was to investigate the characteristic of nanoparticles under consideration of sub-23-nm particles from a 1.8-l direct injection (DI) gasoline engine under stoichiometric air/fuel conditions in the exhaust gas system. For future CO2 challenges, the usage of DI-instead of port fuel injection (PFI)-gasoline engines is unavoidable. Therefore, a state of the art particle management program-particle number (PN) system, the Horiba SPCS (2100) with an integrated CPC (condensation particle counter), was recalibrated from a 50\% cutoff (D-50\%) at 23 nm down to a cutoff at 10 nm and the PCRF (particle concentration reduction factor) for sizes smaller than 23 nm was checked. Two different modal points, out of a representative Real Driving Emission (RDE) cycle, were investigated with both calibrations, D-50\%=10 nm and D-50\%=23 nm. For these different load points, the fuel pressure (FUP) and the start of injection (SOI) were varied, to represent the difference in the structure and the ratio conc((10 nm))/conc((23 nm)) of the nanoparticle emissions. The particle characterization includes the particle number (PN), the particle size distribution (PSD), and the particle mass (PM). The particle number was measured with Horiba SPCS (2100). The particle size distribution was analyzed with a Grimm differential mobility analyzer (DMA) in combination with a Faraday cup electrometer (FCE). Micro Soot and Pegasor were used to determine the PM, and an optical characterization was done with a 120-kV Phillips CM12 transmission electron microscope (TEM). The position of all particle measurement systems was downstream the three-way catalyst (TWC). The results of this investigation showed that a higher injection pressure decreases the PN (without consideration of sub-23-nm particles) in general. The ratio conc((10 nm))/conc((23 nm)) was therefore higher, because smaller particles, especially ash particles, were less reduced from the FUP. This means higher FUP tends to a higher ratio. For the SOI, the main reasons of the ratio differences were explained by an encroachment between the injection jet and the piston, the valve and the wall.}, language = {en} } @misc{AltmannRablGaderer, author = {Altmann, Robert and Rabl, Hans-Peter and Gaderer, Matthias}, title = {Ph{\"a}nomenologische Untersuchung des Einspritzverhaltens von Pflanzen{\"o}lkraftstoff}, series = {3. Tagung der Fuels Joint Research Group (FJRG) "Kraftstoffe f{\"u}r die Mobilit{\"a}t von Morgen"}, journal = {3. Tagung der Fuels Joint Research Group (FJRG) "Kraftstoffe f{\"u}r die Mobilit{\"a}t von Morgen"}, language = {de} } @misc{AltmannGebhard, author = {Altmann, Robert and Gebhard, J{\"u}rgen}, title = {Ph{\"a}nomenologische Untersuchung des Einspritzprozesses eines Injektors aus dem Off-Highway-Segment mit Diesel- und Raps{\"o}lkraftstoff}, series = {16. Internationaler Fachkongress "Kraftstoffe der Zukunft 2019", Berlin}, journal = {16. Internationaler Fachkongress "Kraftstoffe der Zukunft 2019", Berlin}, language = {de} } @article{BraunGebhardMatysiketal., author = {Braun, Peter and Gebhard, J{\"u}rgen and Matysik, Frank-Michael and Rabl, Hans-Peter}, title = {Potential Technical Approaches for Improving Low-Temperature NOx Conversion of Exhaust Aftertreatment Systems}, series = {Chemie Ingenieur Technik}, volume = {90}, journal = {Chemie Ingenieur Technik}, number = {6}, publisher = {WILEY-VCH}, doi = {10.1002/cite.201700122}, pages = {762 -- 773}, abstract = {Lean-burn engines, such as diesel engines, are widely used in mobile and stationary applications. Operation of lean-burn engines leads to formation of distinct amounts of nitrogen oxides (NO and NO2). Efficient aftertreatment is mandatory to meet legal requirements, especially at low exhaust temperatures, as for the future a decline of the exhaust temperature level can be predicted due to improved engine efficiencies. Within this review, potential technical solutions to enhance the DeNO(x)-aftertreatment efficiency at low exhaust temperatures are presented.}, language = {en} }