@inproceedings{HaenninenNiemetzSchoepe, author = {H{\"a}nninen, Risto and Niemetz, Michael and Schoepe, Wilfried}, title = {Transition to turbulence in oscillatory superflows}, series = {ETC 2013 - 14th European Turbulence Conference 2020: 2 September 2013 - 4 September 2013, Lyon, France}, booktitle = {ETC 2013 - 14th European Turbulence Conference 2020: 2 September 2013 - 4 September 2013, Lyon, France}, abstract = {The flow of superfluid helium-4 at very low temperatures around an oscillating microsphere has been studied in detail. At small oscillation amplitudes the drag force is linear in velocity amplitude. Above a critical velocity amplitude vc a transition from potential flow to turbulent flow is signaled by a large and nonlinear drag force that scales as (v2 - v2 c ), where vc is found to be independent of temperature (below 1 K) and of driving force. Interestingly, the critical velocity is found to scale as vc ~ √κω, where κ = h/m ≈ 10-7 m2/s (h is Planck's constant and m is the mass of a helium-4 atom) is the circulation quantum of the superfluid vortices and ω/2π is the oscillation frequency ranging from about 120 Hz to 700 Hz. We also observe slightly above vc that the flow pattern is unstable and switches intermittently between potential flow and turbulence. From time series recorded at constant drive and temperature we have investigated the statistical properties of this switching phenomenon. In this talk the universal law vc ~ √κω will be discussed in detail. It can be derived theoretically in various ways: firstly, from a qualitative but very general argument based on the "superfluid Reynolds number" Rs = vl/κ where v is the flow velocity and l is a characteristic length scale, secondly, and in more detail, from Kopnin's equation of the time dependence of the vortex line density, and, finally, we have obtained this law rigorously by dynamical scaling of the equations of motion of vortex dynamics.}, language = {en} } @inproceedings{RiegerMuehlbauerRabletal., author = {Rieger, Anna and M{\"u}hlbauer, Christian and Rabl, Hans-Peter and Weber, Rainer}, title = {Dissonanz als Bewertungskriterium multi-tonalen Schalls}, series = {Fortschritte der Akustik - DAGA 2020: 46. Deutsche Jahrestagung f{\"u}r Akustik}, booktitle = {Fortschritte der Akustik - DAGA 2020: 46. Deutsche Jahrestagung f{\"u}r Akustik}, publisher = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, pages = {788 -- 791}, language = {de} } @inproceedings{MuehlbauerRablRottengruber, author = {M{\"u}hlbauer, Christian and Rabl, Hans-Peter and Rottengruber, Herrmann}, title = {Development of a Methodology for Acoustic Analysis and Optimization of Mechatronic Fuel Injection Systems}, series = {Automotive Acoustics Conference 2019: Proceedings, 5. Internationale ATZ-Fachtagung Fahrzeugakustik}, booktitle = {Automotive Acoustics Conference 2019: Proceedings, 5. Internationale ATZ-Fachtagung Fahrzeugakustik}, editor = {Siebenpfeiffer, Wolfgang}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-27668-3}, doi = {10.1007/978-3-658-27669-0_15}, pages = {211 -- 225}, abstract = {To identify the sound quality of fuel injection systems as a frontloading measure, a system test bench has been developed that simulates the structure and airborne noise emission. The setup of the system test bench includes an assembly of the acoustical relevant engine parts and an encapsulated drive for the high-pressure pump. A specific control unit enables a high variability for the operation strategy of the injection system. The focus of this study is on the development of a methodology to analyze and optimize the sound quality of gasoline direct injectors in critical operation points by suitable active means. For this, the injection parameters in engine idle have been identified and subsequently transferred to the system test bench. Additionally, the injection parameters have been optimized acoustically and the impacts on the key functions regarding injection rating and shot-to-shot scattering of the injected fuel mass are discussed.}, language = {en} } @inproceedings{ReindlMeierNiemetz, author = {Reindl, Andrea and Meier, Hans and Niemetz, Michael}, title = {Scalable, Decentralized Battery Management System Based on Self-organizing Nodes}, series = {Architecture of computing systems - ARCS 2020: 33rd international conference, Aachen, Germany, May 25-28, 2020, proceedings}, volume = {12155}, booktitle = {Architecture of computing systems - ARCS 2020: 33rd international conference, Aachen, Germany, May 25-28, 2020, proceedings}, editor = {Brinkmann, Andr{\´e} and Karl, Wolfgang and Lankes, Stefan and Tomforde, Sven and Pionteck, Thilo and Trinitis, Carsten}, publisher = {Springer International Publishing}, address = {Cham}, isbn = {978-3-030-52793-8}, doi = {10.1007/978-3-030-52794-5_13}, pages = {171 -- 184}, abstract = {Due to the transition to renewable energy sources and the increasing share of electric vehicles and smart grids, batteries are gaining in importance. Battery management systems (BMSs) are required for optimal, reliable operation. In this paper, existing BMS topologies are presented and evaluated in terms of reliability, scalability and flexibility. The decentralisation of BMSs and associated advantages are shown. A scalable, reconfigurable BMS based on a distributed architecture of self-organized, locally controlled nodes is proposed. For distributed system control, producers, batteries and consumers each are equipped with a local microcontroller based control unit, which monitors and controls the local parameters with its own computing and communication resources. Features, advantages and challenges to overcome of the proposed approach are described.}, language = {en} } @inproceedings{AndersBriemNovaketal., author = {Anders, M. and Briem, Ulrich and Novak, G. and Steinbach, G.}, title = {Neue VDI-Richtlinie f{\"u}r die Seiltriebauslegung}, series = {28. Internationale Kranfachtagung 2020 "Kran 4.0: Potenziale der Digitalisierung", 4. und 5. M{\"a}rz 2020, Magdeburg}, booktitle = {28. Internationale Kranfachtagung 2020 "Kran 4.0: Potenziale der Digitalisierung", 4. und 5. M{\"a}rz 2020, Magdeburg}, editor = {Katterfeld, Andr{\´e} and Krause, Friedrich and Pfeiffer, Dagmar and Richter, Klaus}, publisher = {LOGiSCH GmbH}, address = {Magdeburg}, isbn = {978-3-947068-08-1}, pages = {59 -- 72}, language = {de} } @inproceedings{DiamantidisSykora, author = {Diamantidis, Dimitris and S{\´y}kora, Miroslav}, title = {Reliability Differentiation and Uniform Risk in Standards}, series = {Scientific Symposium Future Trends in Civil Engineering, Zagreb,Croatia, 17 October 2029}, booktitle = {Scientific Symposium Future Trends in Civil Engineering, Zagreb,Croatia, 17 October 2029}, doi = {10.5592/CO/FTCE.2019.11}, pages = {241 -- 260}, abstract = {Reliability of structures and infrastructures is a major issue in structural engineering. Structural standards have traditionally been mainly concerned with public safety preventing loss of life or injury; this view has been shifting in recent years towards minimisation of economic loss. This contribution discusses the reliability differentiation principle in modern standards. Its aim is to achieve uniform risk levels for the various classes of structures. Codified criteria for reliability differentiation and risk informed decisions inherent in standards and especially in the Eurocodes are critically reviewed. It is shown that the classification of structures based on consequences of failure is an approach that has not been widely implemented in everyday design. Practical rules for the classification and implementation in design are needed and related proposals are presented.}, language = {en} } @inproceedings{Roesel, author = {R{\"o}sel, Birgit}, title = {A concept of a mainly digitalized course on control theory including problembased practical units and digital supported exams}, series = {HEAd'20: Sixth International Conference on Higher Education Advances, June 2 - June 5 2020, Valencia (Spain)}, booktitle = {HEAd'20: Sixth International Conference on Higher Education Advances, June 2 - June 5 2020, Valencia (Spain)}, doi = {10.4995/HEAd20.2020.11112}, abstract = {This paper decribes the concept of a course on control theory as a minor subject in the department of electrical engineering at the OTH Regensburg. The basis for a new concept is the idea of contructive alignment. The whole teaching module is devided in two blocks. The first block contains the teaching of the knowledge about control theory with an integrated approach for lectures, exercises and practical sessions. In the second block the students attent a practical work package to have the possibility to applicate and deepen their knowledge. To foster active participation the students are asked to document and reflect their work with the course context in an electronic portfolio. The exam of this module consists of three parts with respect to the different competencies obtained during the module. This concept develops not only the knowledge on control theory but personal and social competencies which are of growing interest. The aim of the paper is to present the idea of the concept. Following papers will illustrate the development process and the results obtained later on.}, language = {en} } @article{MalzKrenkelSteffens, author = {Malz, Sebastian and Krenkel, Walter and Steffens, Oliver}, title = {Infrared Reflective Wall Paint in Buildings: Energy Saving Potentials and Thermal Comfort}, series = {Energy and Buildings}, volume = {224}, journal = {Energy and Buildings}, number = {October}, publisher = {Elsevier}, issn = {0378-7788}, doi = {10.1016/j.enbuild.2020.110212}, abstract = {The reduction of the energy demand of existing buildings is the main objective of building refurbishment. Managing the heat radiation properties of the wall construction is a possible way to develop highly effective and resource efficient insulation materials and concepts. The application of infrared reflective wall paints and coatings has been studied since the latter half of the 20th century. A brief review of the literature gives an account of the current research status. One has to realise that the conclusions are not uniformly consistent but depend strongly on the specific boundary conditions and investigated parameters. The study presented here discusses the usage of infrared reflective wall paint in conjunction with heat insulation for historic brick masonry. The possible energy savings are linked to the resulting thermal comfort. We identify critical parameters that must be taken into account when using infrared reflective wall paint and derive recommended design rules for the refurbishment of such building types. The findings prove that infrared reflective wall paint can decrease heat losses by 18\% and up to 22\% if comfort conditions are considered. Increasing energy savings can also cause the negative effect of high radiative asymmetry. Thus, each configuration must be observed in detail.}, language = {en} } @article{SchulzSchwarz, author = {Schulz, Carsten and Schwarz, Colin}, title = {Drivetrain fatigue strength characteristics of model-predictive control for wind turbines}, series = {Wind Energy}, volume = {23}, journal = {Wind Energy}, number = {12}, publisher = {Wiley}, doi = {10.1002/we.2520}, pages = {2137 -- 2149}, abstract = {Wind turbines play a crucial role in the revolution towards renewable resources. They need to be economically competitive to be sustainable. This still requires to lower the cost of energy (COE). To this end, nonlinear model predictive control (NMPC) is used within this paper. As known from literature, NMPC significantly improves the energy extracting performance as well as the mitigation of tower loads of wind turbines. As it is shown in this paper, the drivetrain fatigue strength drops disproportionally in parallel, which either increases the demands on the turbine design or decreases the lifetime of drivetrain components. Without additional boundary conditions to the underlying optimal control problems (OCPs), the application of energy-maximizing NMPC might so even raise the COE. Only penalizing axial torque oscillations by quadratic terms decreases energy-extracting performance below the level of classical wind turbine controllers. This makes more sophisticated conditions necessary. In this paper, the increase of the drivetrain damage by NMPC is analyzed, and appropriate boundary conditions are derived, to balance the two contradicting objectives of energy maximization and drivetrain load mitigation. An NMPC approach based on indirect methods is used, to obtain a solution of the OCPs very efficiently. It applies the Hamilton equations and Pontryagin's maximum principle. Its accuracy and efficiency to solve OCPs was presented over the last decades.}, language = {en} } @inproceedings{SippenauerBrueckl, author = {Sippenauer, Thomas and Br{\"u}ckl, Oliver}, title = {Verankerung von Flexibilit{\"a}t in der Netzplanung}, series = {ScienceLab (begleitender Workshop zur Konferenz Zuk{\"u}nftige Stromnetze: 29.-30. Januar 2020, Berlin)}, booktitle = {ScienceLab (begleitender Workshop zur Konferenz Zuk{\"u}nftige Stromnetze: 29.-30. Januar 2020, Berlin)}, publisher = {Conexio GmbH}, address = {Pforzheim}, isbn = {978-3-948176-07-5}, doi = {10.35096/othr/pub-5559}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-55592}, pages = {77 -- 81}, abstract = {Im Rahmen des Projektes C/sells wurden mehrere Mittelspannungsnetze modelliert, um die aktuellen Spannungsverh{\"a}ltnisse und Leitungsauslastungen nachbilden zu k{\"o}nnen. Zudem wurden, angelehnt an den Netzentwicklungsplan, Szenarien f{\"u}r den zuk{\"u}nftigen PV-Zubau und die potenzielle Entwicklung der Elektromobilit{\"a}t entworfen. Auf Basis der Ergebnisse l{\"a}sst sich eine Netzanalyse hinsichtlich Spannungs- und Stromgrenzwert{\"u}berschreitungen sowie zu deren potenziellen Auftrittszeitpunkten und Auftrittsdauern durchf{\"u}hren. Parallel wurde anhand von Sensitivit{\"a}tsanalysen untersucht, welche Wirksamkeit Flexibilit{\"a}tseins{\"a}tze an den verschiedenen Netzknoten auf den Engpass haben. Dadurch kann bestimmt werden, wie effektiv die verf{\"u}gbaren, in der Regel {\"o}rtlich gebundenen Flexibilit{\"a}tsanbieter eingesetzt werden k{\"o}nnen. Da die Sensitivit{\"a}ten arbeitspunktabh{\"a}ngig sind, wurden verschiedene Zeitpunkte im Jahresverlauf berechnet und die jeweilige {\"A}nderungen der Wirksamkeit ausgewertet. Neben der H{\"o}he der Leistungsabweichung wurde die Flexibilit{\"a}tsanforderung auch anhand der Einsatzzeitpunkte und Einsatzdauer sowie anhand der H{\"a}ufigkeit der n{\"o}tigen Flexibilit{\"a}tseins{\"a}tze charakterisiert. Aus den gewonnenen Erkenntnissen soll abgeleitet werden, inwiefern sich der flexible Einsatz der Verbrauchsanlagen in der Netzplanung verankern l{\"a}sst. Besonders relevant ist deshalb, mit welcher Verl{\"a}sslichkeit die Flexibilit{\"a}t abgerufen werden kann. Eine sehr hohe Verl{\"a}sslichkeit l{\"a}sst sich je nach Flexibilit{\"a}tsanbieter m{\"o}glicherweise nicht oder nur zu sehr hohen Preisen gew{\"a}hrleisten. Die Eignung der Flexibilit{\"a}tseins{\"a}tze wird somit sowohl aus technischer als auch aus wirtschaftlicher Sicht bewertet. Da eine vollst{\"a}ndige Verl{\"a}sslichkeit ohnehin nicht sichergestellt werden kann (technische St{\"o}rungen einer Anlage, Wettereinfl{\"u}sse, etc.), werden auch Fallback-Strategien, z. B. Einspeisespitzenkappung, in die Analyse einbezogen.}, language = {de} } @inproceedings{SippenauerBrueckl, author = {Sippenauer, Thomas and Br{\"u}ckl, Oliver}, title = {Erschließung der Flexibilit{\"a}tspotenziale eines Trinkwasserversorgungssystems}, series = {ScienceLab (begleitender Workshop zur Konferenz „Zuk{\"u}nftige Stromnetze": 2020, Berlin)}, booktitle = {ScienceLab (begleitender Workshop zur Konferenz „Zuk{\"u}nftige Stromnetze": 2020, Berlin)}, publisher = {Conexio GmbH}, address = {Pforzheim}, isbn = {978-3-948176-07-5}, doi = {10.35096/othr/pub-5562}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-55629}, pages = {126 -- 130}, abstract = {In Zusammenarbeit mit den Kreiswerken Cham wurde an der OTH Regensburg das Trinkwasserversorgungsgebiet mit allen relevanten Pumpen und Hochbeh{\"a}ltern nachgebildet. Mithilfe des Modells kann die aktuelle, f{\"u}llstandgesteuerte Betriebsweise unter Einhaltung der Randbedingungen (Grenzwerte der Beh{\"a}lterf{\"u}llst{\"a}nde, elektrische Verschaltung der Pumpen) simuliert werden. Daraus l{\"a}sst sich auch das gesicherte, f{\"u}r die Netzplanung geeignete Flexibilit{\"a}tspotenzial anhand der Leistungsabweichung gegen{\"u}ber dem regul{\"a}ren Fahrplan, der Einsatzdauer, dem Einsatzzeitpunkt und der Pause zwischen den Flexibilit{\"a}tsabrufen charakterisieren. In einem Feldversuch wurde vordergr{\"u}ndig untersucht, inwiefern der Einsatz von Flexibilit{\"a}t in der Trinkwasserversorgung technisch umsetzbar ist.}, language = {de} } @inproceedings{KrausBrueckl, author = {Kraus, Hermann and Br{\"u}ckl, Oliver}, title = {Use and Programmatic Extension of PowerFactory for the Implementation of Automated Network Planning at the Distribution Grid Level}, series = {2020 10th International Conference on Advanced Computer Information Technologies (ACIT): 16-18 Sept. 2020}, booktitle = {2020 10th International Conference on Advanced Computer Information Technologies (ACIT): 16-18 Sept. 2020}, publisher = {IEEE}, doi = {10.1109/ACIT49673.2020.9208900}, pages = {731 -- 736}, abstract = {In this paper it is presented how the network calculation program PowerFactory is used to implement automated network planning algorithms. PowerFactory's internal functions and data sets are discussed and it is shown how the functions and data sets have been extended by specially developed scripts to enable the automation of network planning steps. Finally, the methodology applied to calculate grid use cases is briefly discussed.}, language = {en} } @inproceedings{HopfenspergerDaubnerHerrmannetal., author = {Hopfensperger, Bernhard and Daubner, Andreas and Herrmann, Fabian and Hopkins, Andrew and Mellor, Phil}, title = {Investigation of Shifted PWM Methods for a Dual Three-Phase System to Reduce Capacitor RMS Current}, series = {PCIM Europe Digital Days 2020: International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management: 07.-08.07.2020, Online [proceedings]}, booktitle = {PCIM Europe Digital Days 2020: International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management: 07.-08.07.2020, Online [proceedings]}, publisher = {VDE-Verlag}, address = {Berlin, Offenbach}, isbn = {978-3-8007-5245-4}, pages = {124 -- 131}, abstract = {Mild hybrid automotive topologies containing a 48V high power (>15 kW) electric drive system demand a high integration of power electronics and electrical machine. A multi-phase motor winding topology helps to keep the per-phase operating currents to a reasonable level. Close integration and multi-phase system have led to a drive system with dual 3-phase systems supplied by a common 48V DC-link, which allows to shift PWM patterns for reduction of DC-link capacitor ripple current and size. This paper derives some basic rules for combinations of common PWM methods for dual 3-phase systems without magnetic cross-coupling. Experimental measurements verify simulated results.}, subject = {Elektroantrieb}, language = {en} } @incollection{LangSteinbornSteffensetal., author = {Lang, Christian and Steinborn, Florian and Steffens, Oliver and Lang, Elmar Wolfgang}, title = {Applying a 1D-CNN Network to Electricity Load Forecasting}, series = {Theory and Applications of Time Series Analysis}, booktitle = {Theory and Applications of Time Series Analysis}, editor = {Valenzuela, O. and Rojas, F. and Herrera, L.J. and Pomares, H. and Rojas, I.}, publisher = {Springer}, doi = {10.1007/978-3-030-56219-9_14}, pages = {205 -- 218}, abstract = {This paper presents a convolutional neural network (CNN) which can be used for forecasting electricity load profiles 36 hours into the future. In contrast to well established CNN architectures, the input data is one-dimensional. A parameter scanning of network parameters is conducted in order to gain information about the influence of the kernel size, number of filters and number of nodes. Furthermore, different dropout methods are applied to the CNN and are evaluated. The results show that a good forecast quality can already be achieved with basic CNN architectures, the dropout improves the forecast. The method works not only for smooth sum loads of many hundred consumers, but also for the load of single apartment buildings.}, language = {en} } @article{LangMonkman, author = {Lang, A. and Monkman, Gareth J.}, title = {An analysis of the electrical capacitance between two conducting spheres}, series = {Journal of Electrostatics}, volume = {108}, journal = {Journal of Electrostatics}, publisher = {Elsevier}, doi = {10.1016/j.elstat.2020.103518}, abstract = {Many modern composites consist of dielectric polymer matrices containing embedded spherical particles. These particles can be electrically conducting and often have magnetic properties. In order to accurately model and simulate such materials, precise calculation of the electrical capacitance between identically sized spheres is required. This is of particular relevance at microscopic dimensions where many smart material-based micro devices are concerned. This may appear trivial for a small number of particles. However, many methods or their analysis appear to be questionable or not applicable at reduced dimensions. In this work, the various methods of analysis are scrutinized before being compared with both simulation and direct measurements. It is surprising to note that of the many works investigated only 3 are in close agreement with both simulation and measurement. Graphical abstract This paper deals with the precise calculation of the electrical capacitance between two conducting spheres of equal, or near equal size.The calculations have been verified by both experimental measurements and simulation. Algorithms in MatLab (Octave) format have been included in the supporting information.}, language = {en} } @article{ChenZhangSongetal., author = {Chen, Rui and Zhang, Zhuo and Song, Ruizhou and Fang, Cheng and Sindersberger, Dirk and Monkman, Gareth J. and Guo, Jianglong}, title = {Time-dependent electroadhesive force degradation}, series = {Smart Materials and Structures}, volume = {29}, journal = {Smart Materials and Structures}, number = {5}, publisher = {IOP Publishing}, doi = {10.1088/1361-665X/ab79b5}, abstract = {This paper concerns a comprehensive investigation of time-dependent electroadhesion (EA) force degradation. EA shear force tests on different object materials (a PET, glass, ABS, and wood plate) have shown that force degradation was dominated by residual polarization charges trapped in the EA pad dielectric rather than in the substrate dielectric from which the object to be prehended is made. In order to explain this dynamic physical phenomenon, a model of dielectric polarization and depolarization has been proposed. According to the derived relationship between EA force and discharge time, three different methods intended to mitigate this problem has been compared: (1) the natural discharge method, (2) the high voltage resistor discharge method, and (3) the discharge prior to field polarity reversal method. These methods are useful for generating repeatable and stable EA forces, which are required for the characterization of EA pads and their subsequent employment in material handling, mobile robot crawling and climbing tasks.}, language = {en} } @article{HaugVetterWeber, author = {Haug, Sonja and Vetter, Miriam and Weber, Karsten}, title = {Geb{\"a}udesanierung zwischen Energieeffizienz und Sozialvertr{\"a}glichkeit}, series = {TATuP - Zeitschrift f{\"u}r Technikfolgenabsch{\"a}tzung in Theorie und Praxis}, volume = {29}, journal = {TATuP - Zeitschrift f{\"u}r Technikfolgenabsch{\"a}tzung in Theorie und Praxis}, number = {3}, publisher = {oekom-Verlag}, issn = {2567-8833}, doi = {10.14512/tatup.29.3.56}, pages = {56 -- 63}, abstract = {Die Akzeptanz unter Bewohnern und Bewohnerinnen gewinnt bei hoch komplexen, technisch anspruchsvollen energetischen Sanierungen als „Innovationsmotor" zunehmend an Relevanz. Der Beitrag basiert auf zwei Fallstudien zur partizipativen Nutzereinbindung bei energetischen Sanierungen im genossenschaftlichen Wohnbau historischer Stadtquartiere in Regensburg. Neben einer sozialvertr{\"a}glichen Sanierung wurde jeweils ein hohes Maß an Energieeffizienz bei den technischen L{\"o}sungen ange-strebt. Haushaltsbefragungen und qualitative Interviews zeigen die hohe Akzeptanz von Sanierungsmaßnahmen, sofern die Senkung der Energiekosten die erh{\"o}hte Miete kompensiert. Abschließend werden Akzeptanzfaktoren wie Partizipation, Vertrauen, Sozialvertr{\"a}glichkeit und Autarkie er{\"o}rtert.}, subject = {Altbaumodernisierung}, language = {de} } @article{BringoutErbFrikel, author = {Bringout, Ga{\"e}l and Erb, Wolfgang and Frikel, J{\"u}rgen}, title = {A new 3D model for Magnetic Particle Imaging using realistic magnetic field topologies for algebraic reconstruction}, series = {Inverse Problems}, volume = {36}, journal = {Inverse Problems}, number = {12}, publisher = {IOP Publishing}, doi = {10.1088/1361-6420/abb446}, abstract = {We derive a new 3D model for magnetic particle imaging (MPI) that is able to incorporate realistic magnetic fields in the reconstruction process. In real MPI scanners, the generated magnetic fields have distortions that lead to deformed magnetic low-field volumes with the shapes of ellipsoids or bananas instead of ideal field-free points (FFP) or lines (FFL), respectively. Most of the common model-based reconstruction schemes in MPI use however the idealized assumption of an ideal FFP or FFL topology and, thus, generate artifacts in the reconstruction. Our model-based approach is able to deal with these distortions and can generally be applied to dynamic magnetic fields that are approximately parallel to their velocity field. We show how this new 3D model can be discretized and inverted algebraically in order to recover the magnetic particle concentration. To model and describe the magnetic fields, we use decompositions of the fields in spherical harmonics. We complement the description of the new model with several simulations and experiments, exploring the effects of magnetic fields distortion and reconstruction parameters on the reconstruction.}, language = {en} } @misc{Rauch, type = {Master Thesis}, author = {Rauch, Johannes}, title = {Entwicklung eines Regelverfahrens f{\"u}r einen optimierten und zentralen Blindleistungsabruf zur Beeinflussung des Blindleistungshaushalts von Mittelspannungsnetzen unter Einhaltung von Netzrestriktionen}, doi = {10.35096/othr/pub-659}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-6595}, school = {Ostbayerische Technische Hochschule Regensburg}, pages = {115}, abstract = {Die Energiewende f{\"u}hrt zu neuen Herausforderungen f{\"u}r Verteilungsnetzbetreiber hinsichtlich der Er-bringung von Systemdienstleistungen, der Integration weiterer Erzeugungsanlagen und Lasten sowie der Gew{\"a}hrleistung einer hohen Versorgungssicherheit und normgerechten Spannungsqualit{\"a}t. Die De-ckung der auftretenden Blindleistungsbedarfe seitens der Netzbetriebsmittel, Verbraucher und Erzeu-gungsanlagen gewinnt durch den Wegfall der Großkraftwerke f{\"u}r Netzbetreiber zunehmend an Bedeu-tung. Das Projekt SyNErgie besch{\"a}ftigt sich diesbez{\"u}glich mit der Entwicklung neuartiger Blindleis-tungsmanagementsysteme f{\"u}r Mittelspannungsnetze. Ziel ist es, das bisher ungenutzte, freie Blindleis-tungspotential betrieblicher Kompensationsanlagen und dezentraler Erzeugungsanlagen (allgemein: Blindleistungsquellen) zu nutzen, um die Blindleistungs{\"a}nderungsf{\"a}higkeit eines Verteilungsnetzes zu erh{\"o}hen. Diese Arbeit besch{\"a}ftigt sich mit der Entwicklung eines zentralen Blindleistungsregelsystems, bei dem Blindleistungsquellen auf Basis von „Optimal Power Flow"-Berechnungen {\"u}ber eine zentrale Recheninstanz angesteuert werden. Zum Einsatz kommt dabei ein Optimierungsalgorithmus, der auf Basis des aktuellen Netzzustandes (Spannungs- und Auslastungsreserven) und des aktuellen Blindleis-tungspotentials der Blindleistungsquellen einen bedarfsoptimalen Abruf koordiniert. Das zentrale Re-gelverfahren wird in Netzmodellen verschiedenartiger Mittelspannungsnetzgruppen und unterschiedli-cher Art und Anzahl von Blindleistungsquellen angewendet sowie im Hinblick auf variierende Zielvor-gaben und Randbedingungen evaluiert und diskutiert.}, language = {de} } @article{KeimParedesNonnetal., author = {Keim, Vincent and Paredes, Marcelo and Nonn, Aida and M{\"u}nstermann, Sebastian}, title = {FSI-simulation of ductile fracture propagation and arrest in pipelines}, series = {International Journal of Pressure Vessels and Piping}, volume = {182}, journal = {International Journal of Pressure Vessels and Piping}, number = {May}, publisher = {Elsevier}, doi = {10.1016/j.ijpvp.2020.104067}, abstract = {The fracture propagation and arrest control for pipelines transporting rich natural gases and high vapor pressure liquids is based on the Battelle Two-Curve Model (BTCM). Distinct limitations of this model were demonstrated for past and modern steels and gas mixtures. These can be related to the insufficient description of individual physical processes and interactions between the pipe material and transported mixture during the running ductile fracture. In the past, fluid-structure interaction (FSI) models enabled a more sophisticated, coupled analysis of the failure scenario. To quantify their capability of describing the multi-physical processes, the FSI models need to be verified by experimental data from full-scale burst tests (FSBT). Therefore, this paper deals with the simulation of five FSBTs from the literature on API grade X65 pipes with different pipe geometries, mixtures and initial conditions. The FSI is modeled by the coupled Euler-Lagrange (CEL) method. The modified Mohr-Coulomb (MMC) model is implemented in the CEL framework to describe the deformation and ductile fracture in the X65/L450 pipes. 3D Euler equations are used to calculate the mixture decompression with the GERG-2008 equation of state defining the volumetric behavior of a CO2-rich mixture, CH4 and H2. The extended model considers the effect of soil backfill on the pipe deformation and inertia. The numerical predictions agree well with the experimental findings in terms of the crack propagation speed and arrest length underlining the capability of the developed numerical tool.}, subject = {Bruchmechanik}, language = {en} }