@book{AltmannGebhardEmbergeretal., author = {Altmann, Robert and Gebhard, J{\"u}rgen and Emberger, Peter and Thuneke, Klaus and Rabl, Hans-Peter and Remmele, Edgar}, title = {Z{\"u}nd- und Brennverhalten von Pflanzen{\"o}lkraftstoff und {\"U}bertragung auf einen Motor der Abgasstufe V}, volume = {69}, publisher = {Technologie- und F{\"o}rderzentrum im Kompetenzzentrum f{\"u}r Nachwachsende Rohstoffe}, address = {Straubing}, issn = {1614-1008}, pages = {188}, abstract = {Durch den Ersatz von Dieselkraftstoff durch Raps{\"o}lkraftstoff (R100) k{\"o}nnen Treibhausgasemissionen reduziert werden. F{\"u}r einen st{\"o}rungsfreien Betrieb eines Motors mit Raps{\"o}lkraftstoff sind jedoch Modifikationen an Motorkomponenten und Motorsteuerger{\"a}t notwendig, um eine effiziente Verbrennung im Motor zu erreichen. Ziel des Vorhabens ist die Erarbeitung von Grundlagen zur Auslegung der Motorsteuerung pflanzen{\"o}ltauglicher Offroad-Motoren mit moderner Abgasnachbehandlung mit anschließender entsprechender Abstimmung der Motorapplikation am Pr{\"u}fstand. Grundlegende Untersuchungen der physikalischen Prozessabl{\"a}ufe von R100 bei der Einspritzung werden an einem hydraulischen Druckanstiegsanalysator (HDA) und einer Hochdruck-Hochtemperatur-Kammer (HDHT-Kammer) durchgef{\"u}hrt. Unterschiede im Z{\"u}nd- und Brennverhalten werden in einer Konstantvolumenbrennkammer untersucht. Abschließend werden die Erkenntnisse am Motorenpr{\"u}fstand auf einen DEUTZ-Motor {\"u}bertragen, dessen Einspritzsystem auch bei den grundlegenden Untersuchungen verwendet wurde. Die Ergebnisse zeigen, dass das Einspritzverhalten von R100 eine h{\"o}here Sensitivit{\"a}t gegen{\"u}ber Kraftstofftemperaturvariationen aufweist als Dieselkraftstoff. Bei niedrigen raftstofftemperaturen sind mit R100 ein l{\"a}ngerer {\"O}ffnungsverzug und eine geringere Einspritzmenge festzustellen. Um diesen Einfluss bei der Einspritzstrategie zu kompensieren, ist die Kenntnis der Kraftstofftemperatur im Injektor notwendig. Eine weitere Herausforderung stellt die Gemischaufbereitung dar, hier f{\"u}hren unter anderem die h{\"o}here Viskosit{\"a}t und h{\"o}here Siedetemperaturen von R100 zu einem schm{\"a}leren Spritzwinkel und verz{\"o}gerter Verdampfung im Vergleich zum Dieselkraftstoff. Eine Erh{\"o}hung des Einspritzdrucks und h{\"o}here Temperaturen und Dr{\"u}cke in der Brennkammer verbessern die Gemischaufbereitung. Bei Bedingungen von mittlerer und hoher Last ist der Z{\"u}ndverzug von R100 k{\"u}rzer und das Verbrennungsverhalten {\"a}hnlich zum Dieselkraftstoff. Eine geringere W{\"a}rmefreisetzung von R100 wird durch den geringeren Heizwert verursacht. Unter Bedingungen von niedriger Last und Motorstart ist ein l{\"a}ngerer Z{\"u}ndverzug von R100 im Vergleich zum Dieselkraftstoff festzustellen. Eine Steigerung des Einspritzdrucks und h{\"o}here Brennkammerdr{\"u}cke und -temperaturen f{\"u}hren bei beiden Kraftstoffen zu k{\"u}rzeren Z{\"u}ndverz{\"u}gen, der Einfluss dieser Parameter ist jedoch f{\"u}r R100 st{\"a}rker als f{\"u}r Dieselkraftstoff. Voreinspritzungen f{\"u}hren bei beiden Kraftstoffen zu einer Verk{\"u}rzung des Z{\"u}ndverzugs der Haupteinspritzung und zu einer geringeren W{\"a}rmefreisetzungsrate. Am Motorpr{\"u}fstand ist bei gleicher Motorapplikation mit R100 eine geringere Leistung als mit Dieselkraftstoff festzustellen. Nach Angleichung der Motorleistung durch Anhebung der Einspritzmenge von R100 sind im Rohabgas Stickstoffoxid (NOX)- und Kohlenstoffmonoxidemissionen auf gleichem Niveau zu Dieselkraftstoff zu beobachten sowie geringere Partikelemissionen. Unter Verwendung eines DoE Vorgehens kann der Partikel-NOX - trade-off von R100 optimiert und Einstellparameter gefunden werden, in denen sowohl niedrigere NOX als auch niedrigere Partikelemissionen im Vergleich zum Dieselkraftstoff resultieren. Das installierte Abgasnachbehandlungssystem, bestehend aus einem Dieseloxidationskatalysator (DOC), Dieselpartikelfilter (DPF) und selektivem katalytischem Reduktionssystem (SCR), arbeitet f{\"u}r beide Kraftstoffe {\"a}hnlich und es scheint keine Anpassung der Dosierungsstrategie der w{\"a}ssrigen Harnstoffl{\"o}sung notwendig zu sein. Eine Regeneration des Partikelfilters mit R100 war nach Optimierung der Einstellparameter der Drosselklappe m{\"o}glich. Motorkaltstart und Leerlauf sind herausfordernde Betriebsphasen, die f{\"u}r R100 einer weiteren Optimierung bed{\"u}rfen. Eine Temperierung von R100 im Injektor auf 50-60 °C sowie eine Kompensation der Einspritzmenge in Abh{\"a}ngigkeit von der Kraftstofftemperatur sind m{\"o}gliche Verbesserungsmaßnahmen. Zudem kann durch einen fr{\"u}heren Einspritzbeginn von R100 das Verbrennungsverhalten angepasst werden. Die Motorpr{\"u}fstandsuntersuchungen best{\"a}tigen qualitativ die Erkenntnisse die mit dem hydraulischen Druckanstiegsanalysator (HDA), der Hochdruck-Hochtemperatur-Kammer (HDHT-Kammer) und der Konstantvolumenbrennkammer gewonnen wurden. Weitere Untersuchungen sind notwendig, um die Ergebnisse auf einen baugleichen, in einer mobilen Arbeitsmaschine eingebauten Motor zu transferieren, damit Informationen zur Dauerhaltbarkeit unter realen Bedingungen erhalten werden k{\"o}nnen. Weiterf{\"u}hrende Forschungsarbeiten sind im Bereich der Betriebsphasen des Motorkaltstarts und Leerlaufs mit Raps{\"o}lkraftstoff n{\"o}tig, um einen dauerhaft st{\"o}rungsfreien Betrieb in diesen Betriebsphasen zu erreichen. Die erzielten Erkenntnisse deuten darauf hin, dass hier noch viel Verbesserungspotenzial vorhanden ist.}, subject = {Biokraftstoff}, language = {de} } @misc{OetjenRiegerRabletal., author = {Oetjen, Arne and Rieger, Anna and Rabl, Hans-Peter and van de Par, Steven}, title = {The role of dissonance in the sound quality perception for electric vehicles}, series = {The Journal of the Acoustical Society of America}, volume = {148}, journal = {The Journal of the Acoustical Society of America}, number = {4}, publisher = {Acoustical Society of America}, doi = {10.1121/1.5147356}, abstract = {Tonal components can be regarded as one of the most relevant components for interior sound quality of electric vehicles, especially at low speeds. Sources for these tones are for example the vehicles' drivetrains but also other technical components. Depending on the driving conditions, due to the interaction of various dominant sources, audible tone complexes can occur. Similar to musical intervals, the different frequency ratios within these complexes can result in consonant or dissonant sensations. The strength of this sensation does not only depend on the frequency relation of the tones but also on their relative levels. In this study, different musical intervals were subjectively rated in terms of their specific consonant or dissonant character. Using an adaptive procedure, sound pairs, each consisting of a two-tone signal, where adjusted to equal dissonance by varying the level of the second tone of one of the two-tone signals. Using the same paradigm, also pairs of equal vehicle sound quality were obtained. With these results, it is possible to quantify dissonance, and theinfluence of dissonance on sound quality expressed in terms of level differences of two-tone signals. These results can help to make the concept of dissonance more useful for sound-engineering applications.}, language = {en} } @incollection{WalterSchwanzerHagenetal., author = {Walter, Stefanie and Schwanzer, Peter and Hagen, Gunter and Haft, Gerhard and Dietrich, Markus and Rabl, Hans-Peter and Moos, Ralf}, title = {Hochfrequenzsensorik zur direkten Beladungserkennung von Benzinpartikelfiltern}, series = {Automobil-Sensorik 3}, booktitle = {Automobil-Sensorik 3}, editor = {Tille, Thomas}, publisher = {Springer Vieweg}, address = {Berlin}, isbn = {978-3-662-61259-0}, doi = {10.1007/978-3-662-61260-6_7}, pages = {185 -- 208}, abstract = {In Folge der Versch{\"a}rfung der gesetzlichen Abgasnormen wurden f{\"u}r direkt-einspritzende Benzinmotoren Partikelfilter notwendig. Zur Beladungs{\"u}berwachung k{\"o}nnen aufgrund stark unterschiedlicher Rahmenbedingungen die aus Dieselmotoren bekannten Systeme, wie dem Differenzdrucksensor, nur eingeschr{\"a}nkt {\"u}bernommen werden. Ein hochfrequenzbasiertes Verfahren koppelt mittels Antennen elektromagnetische Wellen in das Filtergeh{\"a}use ein, deren Ausbreitungsverhalten durch die dielektrischen Eigenschaften des eingelagerten Rußes beeinflusst wird. Hierdurch kann bei Auswertung von Transmissionsd{\"a}mpfung oder Resonanzfrequenzen die Rußbeladung direkt detektiert werden.}, language = {en} } @misc{SchwanzerMieslingerRabletal., author = {Schwanzer, Peter and Mieslinger, Johann and Rabl, Hans-Peter and Dietrich, Markus and Haft, Gerhard and Walter, Stefanie and Hagen, Gunter and Moos, Ralf and Gaderer, Matthias}, title = {Monitoring of a Particulate Filter for Gasoline Direct Injection Engines with a Radio-Frequency-Sensor}, series = {11th International Exhaust Gas and Particulate Emissions Forum, 3.-4.3.2020, Ludwigsburg, Germany}, journal = {11th International Exhaust Gas and Particulate Emissions Forum, 3.-4.3.2020, Ludwigsburg, Germany}, abstract = {In order to comply with future emission regulations, the use of particulate filters in vehicles with direct injection gasoline engines is essential. The current amount of soot and ash in the filter is calculated by a soot load model in the electronic control unit in combination with a differential pressure sensor determining the pressure drop over the particulate filter. Active regeneration is initiated if the calculated amount of soot or the measured differential pressure is too high. This is associated with additional fuel consumption. An on-board diagnosis for the particulate filter is currently not part of the Euro 6d emission standard. For future exhaust emission standards, on-board diagnosis or active monitoring of the particulate filter is conceivable. One of the benefits of monitoring is the fact that unnecessary active regenerations can be avoided. As a result, there is no additional fuel consumption due to misinterpretations of the amount of soot in the filter. For active monitoring of the particulate filter, a radiofrequency (RF-) sensor, that detects the soot loading of the filter with electromagnetic waves directly, can be used. Such a system has the advantage that by utilizing the filter as a sensor more precise information about the current state of the filter, e.g. a possible damage, can be provided. Worst-case considerations of filter damages, tested at an engine test bench show the advantages which are entailed by a system like that. By means of partial regeneration of the particulate filter it is demonstrated how the remaining amount of soot in the filter can be detected in a better way in comparison to the differential pressure sensor by using the RF-sensor.}, language = {en} } @article{Briem, author = {Briem, Ulrich}, title = {Die neue VDI 2500 : Faserseilwissen kompakt}, series = {Logistik f{\"u}r Unternehmen}, journal = {Logistik f{\"u}r Unternehmen}, number = {11-12}, pages = {36 -- 37}, abstract = {Die Richtlinie VDI 2500 „Faserseile" hat 1990 erstmals zusammenfassend den Stand der Technik auf dem Gebiet der Faserseile dargestellt und wertvolle Infor-mationen {\"u}ber Aufbau, Auswahl, Konfek-tionierung und {\"U}berwachung von Faser-seilen gegeben. Die jetzt erscheinende zweite Auflage enth{\"a}lt eine Vielzahl wichtiger technischer Neuerungen f{\"u}r die Praxis. Zu nennen sind hier die hochfesten Fasern und deren Beschichtung sowie die erstmals systematisch aufgef{\"u}hrten Sei-lendverbindungen und ein Ausblick auf die zuk{\"u}nftig bedeutsamen sogenannten Hybridseile. Eine Checkliste hilft bei der richtigen Auswahl und Bemessung von Faserseilen. Bei den Normen wurde - soweit m{\"o}glich - auf europ{\"a}ische Normen verwiesen.}, language = {de} } @article{Briem, author = {Briem, Ulrich}, title = {Umlaufbiegewechselzahl von verdichteten Seildr{\"a}hten}, series = {Draht}, journal = {Draht}, number = {6}, pages = {14 -- 15}, language = {de} } @misc{SchrollDecker, author = {Schroll-Decker, Irmgard}, title = {Rezension zu: Ethik des Wissens. Freiheit und Verantwortung der Wissenschaft in Zeiten des Klimawandels. oekom Verlag (M{\"u}nchen) 2019. ISBN 978-3-96238-163-9}, series = {socialnet Rezensionen}, journal = {socialnet Rezensionen}, issn = {2190-9245}, language = {de} } @article{RomeisKostrovKramarenkoetal., author = {Romeis, Dirk and Kostrov, Sergei A. and Kramarenko, Elena Yu and Stepanov, Gennady V. and Shamonin (Chamonine), Mikhail and Saphiannikova, M.}, title = {Magnetic-field-induced stress in confined magnetoactive elastomers}, series = {Soft Matter}, volume = {16}, journal = {Soft Matter}, number = {39}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, doi = {10.1039/D0SM01337D}, pages = {9047 -- 9058}, abstract = {We present a theoretical approach for calculating the state of stress induced by a uniform magnetic field in confined magnetoactive elastomers of arbitrary shape. The theory explicitly includes the magnetic field generated by magnetizable spherical inclusions in the sample interior assuming a non-linear magnetization behavior. The initial spatial distribution of particles and its change in an external magnetic field are considered. This is achieved by the introduction of an effective demagnetizing factor where both the sample shape and the material microstructure are taken into account. Theoretical predictions are fitted to the stress data measured using a specifically designed experimental setup. It is shown that the theory enables the quantification of the effect of material microstructure upon introducing a specific microstructural factor and its derivative with respect to the extensional strain in the undeformed state. The experimentally observed differences between isotropic and anisotropic samples, compliant and stiff elastomer matrices are explained.}, language = {en} } @article{GeilfussDawoud, author = {Geilfuß, Kristina and Dawoud, Belal}, title = {Analytical investigation of a zeolite-NaY-water adsorption heat and cold storage and its integration into a steam power process}, series = {Energy}, volume = {195}, journal = {Energy}, number = {March}, publisher = {Elsevier}, doi = {10.1016/j.energy.2020.116977}, abstract = {tabilizing the effects of greenhouse gas emissions on the atmosphere is a key step towards solving the global climate change problems. Storage technologies play an essential role in compensating the discrepancy between surplus energy and peak times. Sorption processes, in particular, offer an environment friendly way for almost loss-free heat (of adsorption or absorption) and cold storage. This work is dedicated first to analytically investigate the potential of applying NaY-Water/Zeolite as a working pair for heat and cold storage upon utilizing high temperature heat. It turned out that, the mass of the adsorber heat exchanger increases the useful specific heat stored from 229 kWh/tzeolite for the ideal storage to 538 kWh/tzeolite or even higher depending on the thermal capacity of the adsorber heat exchanger (AdsHX). Contrary to that trend, COP will decrease with increasing the thermal capacity of the AdsHX. Sensible heat losses between charging and discharging phases do have a negative effect on both stored heating capacity and COP. In addition, an innovative hybrid steam power cum adsorption storage process is introduced and analytically investigated at different ambient conditions and time scenarios for on-peak and off-peak durations over the day. The introduced hybrid process seems quite promising in achieving electrical power production and efficiency enhancements during peak load durations. The extent of enhancing both performance indicators increases with increasing the ambient temperature difference between peak and off-peak times.}, language = {en} } @article{SnarskiiShamoninChamonineYuskevich, author = {Snarskii, Andrei A. and Shamonin (Chamonine), Mikhail and Yuskevich, Pavel}, title = {Effective medium theory for the elastic properties of composite materials with various percolation thresholds}, series = {Materials}, volume = {13}, journal = {Materials}, number = {5}, publisher = {MPDI}, address = {Basel}, doi = {10.3390/ma13051243}, pages = {1 -- 19}, abstract = {It is discussed that the classical effective medium theory for the elastic properties of random heterogeneous materials is not congruous with the effective medium theory for the electrical conductivity. In particular, when describing the elastic and electro-conductive properties of a strongly inhomogeneous two-phase composite material, the steep rise of effective parameters occurs at different concentrations. To achieve the logical concordance between the cross-property relations, a modification of the effective medium theory of the elastic properties is introduced. It is shown that the qualitative conclusions of the theory do not change, while a possibility of describing a broader class of composite materials with various percolation thresholds arises. It is determined under what conditions there is an elasticity theory analogue of the Dykhne formula for the effective conductivity. The theoretical results are supported by known experiments and show improvement over the existing approach. The introduction of the theory with the variable percolation threshold paves the way for describing the magnetorheological properties of magnetoactive elastomers. A similar approach has been recently used for the description of magneto-dielectric and magnetic properties.}, language = {en} } @article{SnarskiiShamoninChamonineYuskevichetal., author = {Snarskii, Andrei A. and Shamonin (Chamonine), Mikhail and Yuskevich, Pavel and Saveliev, Dmitry V. and Belyaeva, Inna A.}, title = {Induced anisotropy in composite materials with reconfigurable microstructure: Effective medium model with movable percolation threshold}, series = {Physica A: Statistical Mechanics and its Applications}, volume = {560}, journal = {Physica A: Statistical Mechanics and its Applications}, number = {December}, publisher = {Elsevier}, doi = {10.1016/j.physa.2020.125170}, abstract = {In composite materials, with field-dependent restructuring of the filler material (changes in the mutual arrangement of inclusions), the presence of an external magnetic field induces anisotropy of the dielectric properties, even if the composite is isotropic in the absence of an external field. A modified effective medium approximation is proposed for the calculation of the components of effective permittivity within a class of composites with reconfigurable microstructure, where both phases (the filler and the matrix) are isotropic and the inclusions have spherical shape. The effective physical properties are calculated in the parallel and perpendicular directions to an applied field. The appearance of the anisotropy of the permittivity is simulated by the introduction of two not-equal, possibly variable (field-dependent) percolation thresholds. The implications, of the proposed theoretical approach, are demonstrated for the case of the dielectric properties of magnetoactive elastomers (MAEs). In MAEs with soft polymer matrices, the mutual arrangement of micrometer-sized magnetic inclusions can significantly change in an applied magnetic field. A reasonable agreement between theory and experiment at a measurement frequency of 1 kHz is found, and is improved in comparison to the previous models. The components of the effective permittivity tensor, characterizing the dielectric properties along the direction of the applied magnetic field and in the orthogonal direction, grow with an increasing field. This growth is more pronounced for the permittivity component in the field direction. The possible extensions of the theoretical model and future directions of research are discussed. The presented theoretical approach can be useful for the application-driven development of a number of smart materials, in particular electro- and magnetorheological gels, elastomers and fluids.}, language = {en} } @article{SavelievBelyaevaChashinetal., author = {Saveliev, Dmitry V. and Belyaeva, Inna A. and Chashin, Dmitri V. and Fetisov, Leonid Y. and Romeis, Dirk and Kettl, Wolfgang and Kramarenko, Elena Yu and Saphiannikova, M. and Stepanov, Gennady V. and Shamonin (Chamonine), Mikhail}, title = {Giant extensional strain of magnetoactive elastomeric cylinders in uniform magnetic fields}, series = {Materials}, volume = {13}, journal = {Materials}, number = {15}, publisher = {MDPI}, address = {Basel}, issn = {1996-1944}, doi = {10.3390/ma13153297}, pages = {1 -- 17}, abstract = {Elongations of magnetoactive elastomers (MAEs) under ascending-descending uniform magnetic fields were studied experimentally using a laboratory apparatus specifically designed to measure large extensional strains (up to 20\%) in compliant MAEs. In the literature, such a phenomenon is usually denoted as giant magnetostriction. The synthesized cylindrical MAE samples were based on polydimethylsiloxane matrices filled with micrometer-sized particles of carbonyl iron. The impact of both the macroscopic shape factor of the samples and their magneto-mechanical characteristics were evaluated. For this purpose, the aspect ratio of the MAE cylindrical samples, the concentration of magnetic particles in MAEs and the effective shear modulus were systematically varied. It was shown that the magnetically induced elongation of MAE cylinders in the maximum magnetic field of about 400 kA/m, applied along the cylinder axis, grew with the increasing aspect ratio. The effect of the sample composition is discussed in terms of magnetic filler rearrangements in magnetic fields and the observed experimental tendencies are rationalized by simple theoretical estimates. The obtained results can be used for the design of new smart materials with magnetic-field-controlled deformation properties, e.g., for soft robotics.}, language = {en} } @article{SavelievBelyaevaChashinetal., author = {Saveliev, Dmitry V. and Belyaeva, Inna A. and Chashin, Dmitri V. and Fetisov, Leonid Y. and Shamonin (Chamonine), Mikhail}, title = {Large Wiedemann effect in a magnetoactive elastomer}, series = {Journal of Magnetism and Magnetic Materials}, volume = {511}, journal = {Journal of Magnetism and Magnetic Materials}, number = {October}, publisher = {Elsevier}, doi = {10.1016/j.jmmm.2020.166969}, abstract = {Large twists of a soft tube (hollow cylinder) in helical magnetic fields are presented for the first time. Such a phenomenon is usually denoted as the Wiedemann effect. The tube is fabricated from a soft magnetoactive elastomer material with the shear modulus of about 56 kPa. The composite material comprises 80 mass\% of micrometer-sized iron particles embedded into a polydimethylsiloxane matrix. The circular magnetic field is generated by an electric current in a straight wire passing through the inner hole of the tube. The maximum value of approximately 350″/cm is observed in a longitudinal magnetic field of a few kA/m overlapped with a circumferential magnetic field of about 1.4 kA/m on the surface of the inner hole. A pronounced hysteresis in the dependence of the Wiedemann effect on the circular magnetic field is found. The ways to enhance the Wiedemann twist in magnetoactive elastomers are discussed. The observed large effect is promising for application in magnetic-field controlled torsional actuators, in particular for soft robotics.}, language = {en} } @article{AndersBriemNovaketal., author = {Anders, M. and Briem, Ulrich and Novak, G. and Steinbach, G.}, title = {Inspektionsintervalle im Blick}, series = {Technische Logistik}, journal = {Technische Logistik}, publisher = {Huss-Medien}, address = {Berlin}, pages = {14 -- 17}, language = {de} } @article{BrockKoderRabletal., author = {Brock, Damian and Koder, Alexander and Rabl, Hans-Peter and Touraud, Didier and Kunz, Werner}, title = {Optimising the biodiesel production process: Implementation of glycerol derivatives into biofuel formulations and their potential to form hydrofuels}, series = {Fuel}, volume = {264}, journal = {Fuel}, number = {March}, publisher = {Elsevier}, doi = {10.1016/j.fuel.2019.116695}, abstract = {A new biofuel concept is developed, enabling the usage of vegetable oils and glycerol derivatives in mixtures with biodiesel. This concept significantly enhances the biodiesel production's profitability and thus strongly contributes to the sustainability of future biofuels. After simple addition reactions with building block chemicals, less hydrophilic glycerol derivatives are obtained, which are compatible with biofuels. Even more, the products of the reactions of glycerol with acetone or butyric acid, referred to as solketal and tributyrin, respectively, lead to promising biofuels in mixtures with rapeseed oil and its biodiesel. Due to their low freezing points, they act as cloud and freezing point depressants, when added to vegetable oil/biodiesel blends. Further, since their viscosity is close to common biodiesel, biofuels containing high amounts of vegetable oil and even more glycerol derivatives than they arise during the biodiesel production can be obtained. Thus, this new class of biofuels enables adaptable compositions depending on the application and also the usage as drop-in fuel without any or just few percent of further additives. After optimising the formulations, ignition delay, exhaust gas recirculation, fuel consumption and combustion process measurements were performed in an unmodified upto-date diesel engine. The experiments showed that the properties of the formulated biofuels are either similar to or even better than diesel. The hydrotropy of the glycerol derivatives in these mixtures enables the potential to implement water into biofuels, so-called hydrofuels, reducing nitrogen oxide emissions and leading to further optimised dropin fuels.}, language = {en} } @article{FrazzicaBrancatoDawoud, author = {Frazzica, Andrea and Brancato, Vincenza and Dawoud, Belal}, title = {Unified Methodology to Identify the Potential Application of Seasonal Sorption Storage Technology}, series = {Energies}, volume = {13}, journal = {Energies}, number = {5}, publisher = {MPDI}, address = {Basel}, doi = {10.3390/en13051037}, pages = {1 -- 17}, abstract = {In this study, the definition of a new methodology for a preliminary evaluation of the working boundary conditions under which a seasonal thermal energy storage (STES) system operates is described. The approach starts by considering the building features as well as the reference heating system in terms of solar thermal collectors' technology, ambient heat sinks/source, and space heating distribution systems employed. Furthermore, it is based on a deep climatic analysis of the place where the STES needs to be installed, to identify both winter and summer operating conditions. In particular, the STES energy density is evaluated considering different space heating demands covered by the STES (ranging from 10\% up to 60\%). The obtained results demonstrate that this approach allows for the careful estimation of the achievable STES density, which is varies significantly both with the space heating coverage guaranteed by the STES as well as with the ambient heat source/sink that is employed in the system. This confirms the need for careful preliminary analysis to avoid the overestimation of the STES material volume. The proposed approach was then applied for different climatic conditions (e.g., Germany and Sweden) and the volume of one of the most attractive composite sorbent materials reported in the literature, i.e., multi-wall carbon nanotubes (MWCNT)-LiCl, using water as the working fluid, needed for covering the variable space heating demand in a Nearly Zero Energy Building (NZEB) was calculated. In the case of Swedish buildings, it ranges from about 3.5 m3 when 10\% of the space heating demand is provided by the STES, up to 11.1 m3 when 30\% of the space heating demand is provided by the STES.}, language = {en} } @inproceedings{SchiedermeierRettnerSteineretal., author = {Schiedermeier, Maximilian and Rettner, Cornelius and Steiner, Marcel and M{\"a}rz, Martin}, title = {Dual-inverter control synchronization strategy to minimize the DC-link capacitor current}, series = {2020 IEEE Vehicle Power and Propulsion Conference (VPPC), 18 November 2020 - 16 December 2020, Gijon, Spain}, booktitle = {2020 IEEE Vehicle Power and Propulsion Conference (VPPC), 18 November 2020 - 16 December 2020, Gijon, Spain}, publisher = {IEEE}, doi = {10.1109/VPPC49601.2020.9330921}, pages = {1 -- 6}, abstract = {This paper proposes the possible switching synchronization strategies of an automotive dual-inverter against the background of minimizing the RMS DC-link capacitor current. The publication mainly focuses on the straight-ahead motion of a rear axle with one electric drive per wheel. In addition to it, a dual-inverter consisting of two subinverters with a common DC-link capacitor is taken into consideration. These sub-inverters each have three phases and are based on a 2-level voltage-source-topology. To control the electrical machines, the continuous Space-Vector-Modulation strategy is used. For this application, different control signal synchronization strategies of the two sub-inverters of the dualinverter are presented. Apart from the existing strategies, this paper proposes a new method, which inherits a compromise between low complexity and high effectiveness. In contrast to previous publications, the resulting capacitor currents are quantified and subsequentlyevaluated. This novel quantification, which is dependent on the dual-inverter's operating point, provides a base for targeted dimensioning of the capacitor. Moreover, this forms the foundation for further investigations of vehicle's cornering, as well as for the possible synchronization of stand-alone inverters. In the context of this publication, the presented results are verified by experimentally determined data of a motor-inverter system.}, language = {en} } @article{ChatzitakisSafarovOpferkuchetal., author = {Chatzitakis, Paris and Safarov, Javid and Opferkuch, Frank and Dawoud, Belal and Hassel, Egon}, title = {Vapor pressures and activity coefficients of 2,2,2-trifluoroethanol in binary mixtures with 1,3-dimethyl-2-imidazolidinone and 2-pyrrolidone}, series = {Journal of Molecular Liquids}, volume = {305}, journal = {Journal of Molecular Liquids}, number = {May}, publisher = {Elsevier}, issn = {0167-7322}, doi = {10.1016/j.molliq.2020.112828}, abstract = {The vapor pressures of two binary mixtures containing 2-trifluoroethanol (TFE) + 1,3-dimethyl-2-imidazolidinone (DMI) and TFE + 2-pyrrolidone (PYR), were investigated at temperatures T = (274.15 to 423.15) K using two different static method installations. Both combinations were modelled using an extended Clausius-Clapeyron equation with concentration dependent parameters and the NRTL equation with temperature dependent parameters. The best fit was obtained using the NRTL equation.}, language = {en} } @article{HaslbeckBrueckl, author = {Haslbeck, Matthias and Br{\"u}ckl, Oliver}, title = {Netzplanung Mittelspannungsnetze: Abbildung eines innovativen Blindleistungsmanagements, Teil 1 und 2}, series = {ew - Magazin f{\"u}r die Energiewirtschaft}, journal = {ew - Magazin f{\"u}r die Energiewirtschaft}, number = {7-8 und 9}, pages = {36 -- 39}, language = {de} } @misc{Sterner, author = {Sterner, Michael}, title = {Ohne Speicher, Wasserstoff und Power-to-X keine Dekarbonisierung von Verkehr und Industrie - M{\"o}glichkeiten und Notwendigkeit der integrierten Sektorenkopplung}, series = {CIGRE/CIRED Informationsveranstaltung 2020, Leipzig, 13.10.2020}, journal = {CIGRE/CIRED Informationsveranstaltung 2020, Leipzig, 13.10.2020}, language = {de} }