@article{SternerSpecht, author = {Sterner, Michael and Specht, Michael}, title = {Power-to-Gas and Power-to-X-The History and Results of Developing a New Storage Concept}, series = {Energies}, volume = {14}, journal = {Energies}, number = {20}, publisher = {MDPI}, doi = {10.3390/en14206594}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-26202}, abstract = {Germany's energy transition, known as 'Energiewende', was always very progressive. However, it came technically to a halt at the question of large-scale, seasonal energy storage for wind and solar, which was not available. At the end of the 2000s, we combined our knowledge of both electrical and process engineering, imitated nature by copying photosynthesis and developed Power-to-Gas by combining water electrolysis with CO2-methanation to convert water and CO2 together with wind and solar power to synthetic natural gas. Storing green energy by coupling the electricity with the gas sector using its vast TWh-scale storage facility was the solution for the biggest energy problem of our time. This was the first concept that created the term 'sector coupling' or 'sectoral integration'. We first implemented demo sites, presented our work in research, industry and ministries, and applied it in many macroeconomic studies. It was an initial idea that inspired others to rethink electricity as well as eFuels as an energy source and energy carrier. We developed the concept further to include Power-to-Liquid, Power-to-Chemicals and other ways to 'convert' electricity into molecules and climate-neutral feedstocks, and named it 'Power-to-X'at the beginning of the 2010s.}, language = {en} } @misc{Sterner, author = {Sterner, Michael}, title = {Gas aus einer Gesamtenergieversorgungsperspektive - Warum wir Power-to-X f{\"u}r die Klimaneutralit{\"a}t brauchen}, series = {Kopernikus-Konferenz Projekt "Ensure" (Deutsche Umwelthilfe), 15. April 2021}, journal = {Kopernikus-Konferenz Projekt "Ensure" (Deutsche Umwelthilfe), 15. April 2021}, language = {de} } @unpublished{KaulBoellmannThemaetal., author = {Kaul, Anja and B{\"o}llmann, Andrea and Thema, Martin and Kalb, Larissa and St{\"o}ckl, Richard and Huber, Harald and Sterner, Michael and Bellack, Annett}, title = {Identification of Robust Thermophilic Methanogenic Archaea and Packing Material for High Liquid Hold-Up at Low Volumetric Gas Flow Rates for Use in Trickle-Bed Reactors for Biological Methanation}, series = {SSRN Electronic Journal}, journal = {SSRN Electronic Journal}, doi = {10.2139/ssrn.3940878}, abstract = {he hydrogen gas-to-liquid mass transfer is the limiting factor in biological methanation. In a trickle-bed reactor, mass transfer can be increased by high flow velocities in the liquid phase, by adding a packing material with high liquid hold-up, or by choosing methanogenic archaea with a high methane productivity. This study analyzed various packings and methanogenic strains from a hydrodynamic and microbial perspective. By analyzing twelve pure cultures of thermophilic methanogens for their ability to produce high quality methane and to form biofilms on different packings, strains of Methanothermobacter were found to perform better than thus of the genus Methanothermococcus. Best methane production and adherence was observed on DuraTop®, Bioflow 9, and filter foam. DuraTop® and Bioflow 9 had also a high dynamic liquid hold-up, but the maximum hold-up was determined for expanded clay. The ideal combination for use in the ORBIT-trickle-bed reactor was identified as Methanothermobacter thermoautotrophicus IM5 and DuraTop®.}, language = {en} } @misc{SternerSchumm, author = {Sterner, Michael and Schumm, Leon}, title = {Netzpuffer - Speicher \& Kraftwerke als virtuelle Leitungen f{\"u}r mehr Versorgungssicherheit und EE-Integration in Nord und S{\"u}d}, series = {7. Smart-Grid-Fachtagung WAGO, Hannover, 29. Sept. 2021}, journal = {7. Smart-Grid-Fachtagung WAGO, Hannover, 29. Sept. 2021}, language = {de} } @misc{Sterner, author = {Sterner, Michael}, title = {Gr{\"u}ner Wasserstoff - wo wir ihn brauchen f{\"u}r die Klimaneutralit{\"a}t}, series = {Energiewendeforum Wasserstoff (Gr{\"u}ner Strom Label e. V.), Bonn, 21. September 2021}, journal = {Energiewendeforum Wasserstoff (Gr{\"u}ner Strom Label e. V.), Bonn, 21. September 2021}, language = {de} } @misc{Sterner, author = {Sterner, Michael}, title = {Wie wird Deutschland klimaneutral? Neue L{\"o}sungen f{\"u}r erneuerbare Energieerzeugung}, series = {Jahreskonferenz der Stiftung Nagelschneider zur Erforschung, M{\"u}nchen, 19.11.2021}, journal = {Jahreskonferenz der Stiftung Nagelschneider zur Erforschung, M{\"u}nchen, 19.11.2021}, address = {M{\"u}nchen}, language = {de} } @misc{Sterner, author = {Sterner, Michael}, title = {Power-to-X for Europes Energy Transformation - Booster H2Global}, series = {Hydrogen Online Workshop Conference (Mission Hydrogen), 25.03.2021}, journal = {Hydrogen Online Workshop Conference (Mission Hydrogen), 25.03.2021}, language = {en} } @misc{Sterner, author = {Sterner, Michael}, title = {Technologieausblick Solarstromspeicher}, series = {Innovationsforum Photovoltaik, 18. Oktober 2021, Linz}, journal = {Innovationsforum Photovoltaik, 18. Oktober 2021, Linz}, language = {de} } @misc{Sterner, author = {Sterner, Michael}, title = {Die Grenzen des Wasserstoff-Hypes}, series = {1. Mitteldeutscher Wasserstoffkongress, 2. November 2021, Leuna CCE Kulturhaus}, journal = {1. Mitteldeutscher Wasserstoffkongress, 2. November 2021, Leuna CCE Kulturhaus}, language = {de} } @inproceedings{AltmannGebhardTroegeretal., author = {Altmann, Robert and Gebhard, J{\"u}rgen and Troeger, Adrian and Winkler, Markus and T{\"o}pfer, Georg and Remmele, Edgar and Gaderer, Matthias and Rabl, Hans-Peter}, title = {Engine performance and emission analysis of a NRMM CI engine with common rail injection system operated with diesel fuel and rapeseed oil fuel}, series = {Proceedings of the 6th Commercial Vehicle Technology Symposium 2020/2021}, booktitle = {Proceedings of the 6th Commercial Vehicle Technology Symposium 2020/2021}, editor = {Berns, Karsten and Dressler, Klaus and Kalmar, Ralf and Stephan, Nicole and Teutsch, Roman and Thul, Martin}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-29716-9}, doi = {10.1007/978-3-658-29717-6_16}, pages = {231 -- 242}, abstract = {The use of alternative fuels in high-power non-road mobile machinery (NRMM) combustion engines is a possible way to substitute fossil fuel. By using pure vegetable oil fuels, like rapeseed oil fuel (DIN 51605), the greenhouse gases can be reduced effectively. Due to the differences in physical and chemical properties, a modification of the engine control unit calibration is necessary to adapt the working process on the fuel. Without modifications, the engine power output with rapeseed oil fuel is lower than with diesel fuel because of the smaller energy content. By adapting the engine settings, like the injection fuel mass, the power loss can be compensated but it accompanies with a higher fuel consumption. The engine emissions at part load conditions show, that there are benefits in particle emissions by using rapeseed oil at similar NOx emissions. Therefore, a design of experiment setup was initiated on a selected engine operation point to determine the effects of further parameters, like rail pressure, manifold pressure and injection pattern, on the process and to see the potential of an optimized calibration.}, language = {en} } @inproceedings{ButtnerAlonsoVillaBohigasBoladerasetal., author = {Buttner, Johannes and Alonso-Villa, Cristina and Bohigas Boladeras, Pere and Kucera, Markus and Waas, Thomas}, title = {The Need for New Software Architectures for Next-generation Vehicle}, series = {Proceedings of the 5th International E-Conference on Advances in Engineering, Technology and Management (ICETM 2021)}, booktitle = {Proceedings of the 5th International E-Conference on Advances in Engineering, Technology and Management (ICETM 2021)}, isbn = {978-1-63248-192-4}, pages = {58 -- 61}, abstract = {Assuming that future connected cars with automated driving functions will require even more computing power and communication bandwidth, the current network infrastructure as well as the existing individualized control units are not a profitable option for such vehicles. In addition, changing user expectations demand flexible architectural patterns and upgradeability of software components without the need to visit the workshop. However, the current statically developed and configured ECU architecture does not offer any practicable possibilities for this. For these reasons, the research for a new dynamic and flexible architecture is necessary. This new type of system architecture is expected to meet future requirements in terms of space, cost, performance, energy efficiency and number of required computing units in the vehicle, which will arise as a result of the implementation/inclusion of new automated driving functionalities, and due to the changes in user expectations. Solutions to this issue can be found in the field of enterprise IT (cluster computing), in which technologies such as Ethernet, container-based virtualization and flexible software architectures have proven themselves to be very efficient for years. Relevant infrastructures, for example from cloud computing providers, have commonly been used in high-performance or high-availability applications. Thus, in the research project A 3F has been investigated which of these concepts and methods can be applied to modern vehicle system architectures. One of the main goals is to assess the synergy potential of the two sectors, information technology and automotive industry, which to date have very different orientations. However, this synergy is expected to grow strongly in the course of the developments mentioned above. In the following pages, the necessary changes related to hardware and software will be discussed briefly und will be compared to concepts and possible solutions from the IT world.}, language = {en} } @inproceedings{MuehlbauerRablRottengruber, author = {M{\"u}hlbauer, Christian and Rabl, Hans-Peter and Rottengruber, Hermann}, title = {Akustische Optimierung von mechatronischen Direkteinspritzsystemen und Analyse der Auswirkungen auf die Robustheit im Systembetrieb}, series = {Motor- und Aggregate-Akustik: 11. Magdeburger Symposium, Tagungsband}, volume = {11}, booktitle = {Motor- und Aggregate-Akustik: 11. Magdeburger Symposium, Tagungsband}, publisher = {Otto-von-Guericke-Universit{\"a}t}, address = {Magdeburg}, doi = {10.25673/36611}, pages = {32 -- 51}, abstract = {The tightening of the emission legislation and political and social demands for sustainable mobility are forcing the automotive industry to develop complex, high precision mechatronic drive systems. The increasing precision of mechatronic components generally leads to an increase in structural excitation and thus to a rise in noise. The socalled ticking of the fuel injection system has a rather low sound pressure level compared to the residual engine noise. Nevertheless, the impulsive and high frequency noise character leads to a decline concerning the perception of comfort and sound quality. In order to identify the sound quality of fuel injection systems as a frontloading measure, a system test bench has been developed which represents the structureborne and airborne sound radiation of the stand-alone injection system in a close to series configuration. In this paper, measures for the acoustic optimization of injection systems and their effects on the robustness of the system are discussed. The focus is on engine idling, since at this operating point the ticking of the injectors and the high-pressure pump can be perceived most clearly due to the low masking effects of other noise sources. For this purpose, the injection parameters were measured during full engine operation and transferred to the system test bench. By using a special development control unit, it was possible to modify the parameters, quantify their influence on the acoustic behavior and, based on this, define NVH optimized control strategies. For the robustness evaluation of the NVH optimized control strategies, key functions of the injection system were analyzed under varying boundary conditions in system operation on an injection rate test bench.}, language = {de} } @inproceedings{SchneiderMuehlbauerSittletal., author = {Schneider, Sebastian and M{\"u}hlbauer, Christian and Sittl, Christopher and Rottengruber, Hermann and Rabl, Hans-Peter and Wagner, Marcus and Verhey, Jesko L.}, title = {Tickerger{\"a}uschanalyse an einem Otto-DI-Motor mittels empirischer Bewertungsformel}, series = {Motor- und Aggregate-Akustik: 11. Magdeburger Symposium, Tagungsband}, booktitle = {Motor- und Aggregate-Akustik: 11. Magdeburger Symposium, Tagungsband}, editor = {Rottengruber, Hermann and Luft, Tommy and Schneider, Sebastian}, publisher = {Otto-von-Guericke-Universit{\"a}t}, address = {Magdeburg}, isbn = {978-3-948749-02-6}, doi = {10.25673/36611}, pages = {65 -- 86}, abstract = {Beim Kauf eines Pkw wird der akustische Qualit{\"a}tseindruck eines Fahrzeugantriebstrangs stetig relevanter. Die wahrgenommene Ger{\"a}uschqualit{\"a}t des Motoraggregates nimmt hierbei eine Schl{\"u}sselrolle ein. Aufgrund der Auspr{\"a}gung einzelner St{\"o}rger{\"a}usche wird jene Ger{\"a}uschqualit{\"a}t negativ beeinflusst. Diese als unangenehm empfundenen Ger{\"a}uschkomponenten gilt es im Rahmen der Fahrzeugentwicklung weiter zu reduzieren, wobei die Identifikation und Bewertung st{\"o}render Ger{\"a}uschanteile am Motorgesamtger{\"a}usch Voraussetzungen f{\"u}r eine effektive Akustikoptimierung sind. Vor allem das impulshafte Tickerger{\"a}usch wird bei Otto-DI-Motoren als besonders l{\"a}stig eingestuft, weswegen dieser Beitrag darauf abzielt, die tickernden Ger{\"a}uschanteile aus dem Gesamtger{\"a}usch zu analysieren und zu bewerten. Hierzu wurde eine empirische Formel entwickelt, welche die tickernden Ger{\"a}uschanteile in ihrer Intensit{\"a}t in Grenzen einstufen kann. Diese ist rein empfindungsbasiert und besteht aus der Impulshaftigkeit, der Lautheit sowie der Sch{\"a}rfe des Motorgesamtger{\"a}usches. Wie auch bei anderen psychoakustischen Bewertungsskalen wurde die Benotung von 1 (sehr tickernd) bis 10 (nicht tickernd) vorgenommen. Anhand von H{\"o}rversuchen mithilfe einer Expertenjury konnte die Tickerger{\"a}uschbewertungsformel anschließend verifiziert werden. Hiernach kann pr{\"a}zise ausgesagt werden, in welchen Motorkennfeldbereichen das Tickerger{\"a}usch die Angenehmheit des Motorgesamtger{\"a}usches untergr{\"a}bt.}, language = {de} } @inproceedings{BruecklWildfeuerSchaechinger, author = {Br{\"u}ckl, Oliver and Wildfeuer, M. and Sch{\"a}chinger, J.}, title = {Systemdienstleistungen durch Biogasanlagen}, series = {Biogas in der Landwirtschaft - Stand und Perspektiven: 7. FNR/KTBL-Onlinetagung 29.-30.09.2021, Darmstadt}, booktitle = {Biogas in der Landwirtschaft - Stand und Perspektiven: 7. FNR/KTBL-Onlinetagung 29.-30.09.2021, Darmstadt}, address = {Darmstadt}, isbn = {978-3-945088-83-8}, pages = {92 -- 101}, subject = {Biogasanlage}, language = {de} } @inproceedings{JupkeReindlMeieretal., author = {Jupke, Michael and Reindl, Andrea and Meier, Hans and Niemetz, Michael}, title = {Bidirectional DC-DC Converter with Digital Droop Parameterization}, series = {26th 2021 International Conference on Applied Electronics (AE): 7-8 Sept. 2021 Pilsen, Czech Republic}, booktitle = {26th 2021 International Conference on Applied Electronics (AE): 7-8 Sept. 2021 Pilsen, Czech Republic}, editor = {Pinker, Jiř{\´i}}, publisher = {Institute of Electrical and Electronics Engineers}, isbn = {978-80-261-0972-3}, doi = {10.23919/AE51540.2021.9542920}, pages = {1 -- 6}, abstract = {The key for decentralized battery systems is a robust and communication-less control strategy for autonomous power sharing of parallel-connected DC-DC converters. Battery systems improve the reliability and quality of power supply in renewable energy systems and enable power supply for off-grid, mobile applications, including islanded grids, home storage, and electric vehicles. In many cases, components with different electrical properties require different voltage levels. An adaptation is consequently essential and is normally implemented in DC grids for the batteries via bidirectional DC-DC converters. The power flow in both directions can thus be ensured. To achieve a power distribution in parallel connected DC-DC converters, a droop control in the form of a virtual internal resistor can be used. This paper presents a novel approach of a DC-DC converter with a digitally parameterizable droop resistor, whose voltage regulation is based on an analog operational amplifier circuit to ensure low delays and robustness. The droop resistor is adjusted with a microcontroller, which offers the possibility to apply a higher-level control for load sharing via an interface. Mathematical correlations are used to clearly define the parameters of the control. Furthermore, the circuit was completely simulated and tested in the hardware setup. The shown results verify the functionality and indicate only minor deviations. Therefore, this circuit is important for future use in distributed battery systems.}, language = {en} } @inproceedings{ReindlSingerMeieretal., author = {Reindl, Andrea and Singer, Thomas and Meier, Hans and Niemetz, Michael and Park, Sangyoung}, title = {Framework to Test DC-DC Converters Developed for a Decentralized Battery Management System}, series = {2021 International Conference on Applied Electronics (AE): 7-8 Sept. 2021, Pilsen, Czech Republic}, booktitle = {2021 International Conference on Applied Electronics (AE): 7-8 Sept. 2021, Pilsen, Czech Republic}, publisher = {IEEE}, doi = {10.23919/AE51540.2021.9542882}, pages = {1 -- 6}, abstract = {DC- DC converters control the power flow and thus the power distribution between the components on different voltage levels. They are essential for (dis)charging batteries and influence the safety and stability of the entire battery management system (BMS). Therefore, testing the functionality and the reliability of DC-DC converters is crucial. This is especially true for decentralized battery management systems (DBMS), where multiple nodes communicate to collectively control the system. The used DC-DC converters are modified to parameterize them during operation via microcontroller interfaces. Integrating the communication into the control loop requires an analysis of the control behavior due to additional delays. Therefore, this paper proposes a framework to test DC-DC converters considering the control and communication perspectives. The response time, the control accuracy and stability of these DC-DC converters, e.g., under continuous and abrupt load changes, are measured in automated tests. The dedicated software framework simulates the DBMS and stimulates the hardware components (e.g. electronic loads, data acquisition) via respective interfaces (CAN, RS232). This allows the test of various DC-DC converters with flexibly adaptable load and power generation profiles. An initial application validates the test framework by verifying the aforementioned aspects and thus the applicability of a DC-DC converter within the DBMS.}, language = {en} } @inproceedings{ReindlMeierNiemetzetal., author = {Reindl, Andrea and Meier, Hans and Niemetz, Michael and Park, Sangyoung}, title = {Decentralized Battery Management System with Customized Hardware Components}, series = {IEEE 19th Student Conference on Research and Development (SCOReD), Sustainable Engineering and Technology towards Industry Revolution: 23-25 Nov. 2021, Kota Kinabalu, Malaysia}, booktitle = {IEEE 19th Student Conference on Research and Development (SCOReD), Sustainable Engineering and Technology towards Industry Revolution: 23-25 Nov. 2021, Kota Kinabalu, Malaysia}, publisher = {IEEE}, doi = {10.1109/SCOReD53546.2021.9652737}, pages = {350 -- 355}, abstract = {With an increasing number of sold electric vehicles (EVs), a large number of used batteries will be at disposal. How to deal with these resources is one of the major challenges in reducing the environmental impact of batteries throughout their entire life cycle. Heterogeneous cell parameters due to the different usage histories are a challenge for second-life use. The effort and cost of remanufacturing required to test and assemble a new battery pack is a further concern. Systems that combine battery packs/modules without full reassembly offer advantages such as cost and reusability. A decentralized battery management system (DBMS) provides a suitable architecture for such systems involving different types of batteries. In this paper, an architecture for a decentralized, battery state-dependent control is shown. The proposed DBMS supports various types of batteries, is scalable and flexibly adaptable for a wide range of applications. Despite the significant advantages, there are increased requirements to meet for the hardware implementation and the applied control strategies. Therefore, the necessary hardware components and their requirements are described and the hardware implementations are provided.}, language = {en} } @inproceedings{SchubertLeeOoi, author = {Schubert, Martin J. W. and Lee, Wai-Kong and Ooi, Boon Yaik}, title = {Quantization and Sampling Effects in Fast Digitally Controlled Switch-Mode DC/DC Buck Converters}, series = {2021 IEEE Industrial Electronics and Applications Conference (IEACon): 22.11.2021 - 23.11.2021, Penang, Malaysia}, booktitle = {2021 IEEE Industrial Electronics and Applications Conference (IEACon): 22.11.2021 - 23.11.2021, Penang, Malaysia}, publisher = {IEEE}, isbn = {978-1-7281-9253-6}, doi = {10.1109/IEACon51066.2021.9654272}, pages = {56 -- 61}, abstract = {Software-defined control of DC/DC switch mode power converters features unequaled flexibility compared to analog control. For fast switching converters as recently used for low power applications, digital control may cause steady-state oscillations known as limit cycles. This effect based on a quantized duty cycle is compared to other aberrations such as output ripple voltage, which is inherent to any pulse-width modulator. A distinction is made between DC and AC errors. The latter are divided into synchronous and asynchronous output voltage disturbances. Synchronous AC errors are composed of the switching frequency and its harmonics.}, language = {en} } @inproceedings{CroceDiamantidisSykora, author = {Croce, Valeria and Diamantidis, Dimitris and S{\´y}kora, Miroslav}, title = {Planning post earthquake surveys: assessments and reconstruction of small historical centres}, series = {1st IABSE Online Symposium 2020, Synergy of culture and civil engineering - history and challenges: Wrocław, Poland, 7-9 October 2020, Proceedings}, booktitle = {1st IABSE Online Symposium 2020, Synergy of culture and civil engineering - history and challenges: Wrocław, Poland, 7-9 October 2020, Proceedings}, editor = {Bien, Jan}, publisher = {Curran Associates Inc}, address = {Red Hook, NY}, isbn = {978-1-7138-2387-2}, pages = {332 -- 339}, abstract = {The contribution presents a methodological procedure for the management and planning of interventions after earthquake events in small historic centres. Reference is made to the case study of Castelluccio di Norcia, a village in the Apennine Mountains affected by the seismic sequence that hit Central Italy in 2016. The earthquake risk of the area and the damaging events of 2016 are critically reviewed. The implementation of cognitive analysis and the application of advanced survey techniques involving the use of nmanned Aerial Vehicles (UAVs) for the purposes of emergency management and monitoring of damaged areas are analysed. The outcomes, combined with the direct involvement of the local population, represent a complete and integrated approach allowing the definition of a) possible intervention strategies, b) related decision criteria and c) practical recommendations for the reconstruction and regeneration of Castelluccio, and, in general, of small historic centres damaged by catastrophic events.}, language = {en} } @inproceedings{GrabRauchGoetzetal., author = {Grab, Robin and Rauch, Johannes and G{\"o}tz, Rebekka and Br{\"u}ckl, Oliver and Eichner, Stefan and Engel, Bernd}, title = {Q-Dynamik: Blindleistungsstellgeschwindigkeiten im Verteilnetz}, series = {Zuk{\"u}nftige Stromnetze: 27.-28. Januar 2021, 03.-04. Februar 2021, Tagungsunterlagen}, booktitle = {Zuk{\"u}nftige Stromnetze: 27.-28. Januar 2021, 03.-04. Februar 2021, Tagungsunterlagen}, publisher = {Conexio-PSE GmbH}, address = {Pforzheim}, isbn = {978-3-948176-12-9}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-58762}, pages = {46 -- 55}, abstract = {Mit der Energiewende geht eine starke Dezentralisierung der Energieeinspeisung einher. So sind im Deutschland des Jahres 2020 rund 31.000 Windenergieanlagen (WEA) in Betrieb, w{\"a}hrend bei der Solarenergie vor kurzem die zweimillionste Photovoltaik-Anlage (PVA) installiert wurde. Fast alle diese dezentralen Energieressourcen (DER) sind nach den Einspeiserichtlinien der Vergangenheit und der Gegenwart in der Lage, Blindleistung bereitzustellen, um die Spannung im Netz zu regeln und zum Blindleistungsausgleich beizutragen. Weitere potentielle dezentrale Blindleistungsquellen wie Blockheizkraftwerke, Kompensationsanlagen und perspektivisch sogar Verbraucher und Speicher sind im Verteilnetz zu finden. Durch den stetigen R{\"u}ckbau konventioneller Großkraftwerke, welche dem {\"U}bertragungsnetz bisher als Blindleistungsquellen zur Verf{\"u}gung standen, bedarf es einer Untersuchung mit der Fragestellung, in welchem Maß die neue Erzeugungslandschaft auch in diesem Feld als Ersatz dienen kann. Ein m{\"o}gliches Hindernis f{\"u}r einen breitangelegten Einsatz von DER zu Zwecken des spannungsebenen{\"u}bergreifenden Blindleistungsmanagements ist mangelndes Wissen {\"u}ber die Regeldynamik dieser verteilten Blindleistungsquellen. {\"U}bertragungs- und Verteilnetzbetreiber, die DER aktiv f{\"u}r Blindleistungsausgleich oder statische Spannungsregelung einsetzen, geben in der Regel ihre Blindleistungsanforderungen in kleineren Stufen mit erheblichen Latenzzeiten zwischen zwei Schritten weiter. Bef{\"u}rchtet wird, dass schnellere Spr{\"u}nge in der Blindleistungsvorgabe zu instabilen Betriebszust{\"a}nden oder anderweitigen Fehlfunktionen im Netz f{\"u}hren k{\"o}nnen. Eine genauere Kenntnis der dynamischen F{\"a}higkeiten vorhandener Blindleistungsquellen sowie der Auswirkungen auf die Netzstabilit{\"a}t und den Netzschutz k{\"o}nnte dazu beitragen, die Geschwindigkeit der Blindleistungsbereitstellung zu optimieren und somit tempor{\"a}re Spannungsschwankungen und -verluste zu minimieren und die Spannungsstabilit{\"a}t insgesamt zu verbessern. Durch eine entsprechende Regelungs- und Einsatzstrategie kann ein optimales Zusammenspiel der verschiedenen Technologien zur Deckung der Blindleistungsbedarfe f{\"u}r unterschiedliche Zeitbereiche erzielt werden. Hierf{\"u}r ist eine genaue Kenntnis der Blindleistungsstellgeschwindigkeiten und des dynamischen Regelverhaltens erforderlich. Dieser Beitrag stellt dazu Ergebnisse aus dem Forschungsprojekt „Q-Integral" vor. Um die relevanten Zeitkonstanten der Blindleistungsbereitstellung vollst{\"a}ndig aufzuf{\"u}hren, werden zun{\"a}chst typische Kommunikationszeiten f{\"u}r die {\"U}bermittlung von Sollwerten diskutiert. Anschließend werden Untersuchungen zu theoretischen und praktischen Reaktionszeiten verschiedener Blindleistungsquellen vorgestellt. Daf{\"u}r werden verschiedene Technologien wie Umrichter f{\"u}r PVA, Batteriespeicher und WEA sowie Synchrongeneratoren, die bei thermischen Kraftwerken die dominierende Technologie sind, betrachtet. Abschließend werden diese Werte mit realen Blindleistungsstellgeschwindigkeiten von ausgedehnten Wind- und Solarkraftwerken verglichen.}, language = {de} }