@inproceedings{FuhrmannNiemetz, author = {Fuhrmann, Thomas and Niemetz, Michael}, title = {Transdisciplinary Bachelor Course Connecting Business and Electrical Engineering}, series = {4th International Conference on Higher Education Advances (HEAd'18), 2018, Universitat Polit{\`e}cnica de Val{\`e}ncia, Val{\`e}ncia}, booktitle = {4th International Conference on Higher Education Advances (HEAd'18), 2018, Universitat Polit{\`e}cnica de Val{\`e}ncia, Val{\`e}ncia}, doi = {10.4995/HEAd18.2018.8056}, abstract = {The OTH Regensburg has a broad variety of study programs in technical, business, social and health sciences. Up to now there is no integral connection in the bachelor curricula between business and technical faculties except for some small subjects. The scope of this project is to develop a new course specialization which connects engineering and business thinking. Electrical engineering students should learn basics of business science and how managers think. Business students should vice versa learn fundamentals of engineering and how engineers solve problems. Students from both faculties work together in projects where they act like start-up companies developing a new product and bringing it into the market. It is seen a transdisciplinary effect: These projects gain innovative results between the disciplines compared to student projects of one isolated discipline. Evaluation results from the first two cohorts indicate high student satisfaction, high learning success as well as directions for further improvement.}, language = {en} } @book{AltmannGebhardEmbergeretal., author = {Altmann, Robert and Gebhard, J{\"u}rgen and Emberger, Peter and Thuneke, Klaus and Rabl, Hans-Peter and Remmele, Edgar}, title = {Z{\"u}nd- und Brennverhalten von Pflanzen{\"o}lkraftstoff und {\"U}bertragung auf einen Motor der Abgasstufe V}, volume = {69}, publisher = {Technologie- und F{\"o}rderzentrum im Kompetenzzentrum f{\"u}r Nachwachsende Rohstoffe}, address = {Straubing}, issn = {1614-1008}, pages = {188}, abstract = {Durch den Ersatz von Dieselkraftstoff durch Raps{\"o}lkraftstoff (R100) k{\"o}nnen Treibhausgasemissionen reduziert werden. F{\"u}r einen st{\"o}rungsfreien Betrieb eines Motors mit Raps{\"o}lkraftstoff sind jedoch Modifikationen an Motorkomponenten und Motorsteuerger{\"a}t notwendig, um eine effiziente Verbrennung im Motor zu erreichen. Ziel des Vorhabens ist die Erarbeitung von Grundlagen zur Auslegung der Motorsteuerung pflanzen{\"o}ltauglicher Offroad-Motoren mit moderner Abgasnachbehandlung mit anschließender entsprechender Abstimmung der Motorapplikation am Pr{\"u}fstand. Grundlegende Untersuchungen der physikalischen Prozessabl{\"a}ufe von R100 bei der Einspritzung werden an einem hydraulischen Druckanstiegsanalysator (HDA) und einer Hochdruck-Hochtemperatur-Kammer (HDHT-Kammer) durchgef{\"u}hrt. Unterschiede im Z{\"u}nd- und Brennverhalten werden in einer Konstantvolumenbrennkammer untersucht. Abschließend werden die Erkenntnisse am Motorenpr{\"u}fstand auf einen DEUTZ-Motor {\"u}bertragen, dessen Einspritzsystem auch bei den grundlegenden Untersuchungen verwendet wurde. Die Ergebnisse zeigen, dass das Einspritzverhalten von R100 eine h{\"o}here Sensitivit{\"a}t gegen{\"u}ber Kraftstofftemperaturvariationen aufweist als Dieselkraftstoff. Bei niedrigen raftstofftemperaturen sind mit R100 ein l{\"a}ngerer {\"O}ffnungsverzug und eine geringere Einspritzmenge festzustellen. Um diesen Einfluss bei der Einspritzstrategie zu kompensieren, ist die Kenntnis der Kraftstofftemperatur im Injektor notwendig. Eine weitere Herausforderung stellt die Gemischaufbereitung dar, hier f{\"u}hren unter anderem die h{\"o}here Viskosit{\"a}t und h{\"o}here Siedetemperaturen von R100 zu einem schm{\"a}leren Spritzwinkel und verz{\"o}gerter Verdampfung im Vergleich zum Dieselkraftstoff. Eine Erh{\"o}hung des Einspritzdrucks und h{\"o}here Temperaturen und Dr{\"u}cke in der Brennkammer verbessern die Gemischaufbereitung. Bei Bedingungen von mittlerer und hoher Last ist der Z{\"u}ndverzug von R100 k{\"u}rzer und das Verbrennungsverhalten {\"a}hnlich zum Dieselkraftstoff. Eine geringere W{\"a}rmefreisetzung von R100 wird durch den geringeren Heizwert verursacht. Unter Bedingungen von niedriger Last und Motorstart ist ein l{\"a}ngerer Z{\"u}ndverzug von R100 im Vergleich zum Dieselkraftstoff festzustellen. Eine Steigerung des Einspritzdrucks und h{\"o}here Brennkammerdr{\"u}cke und -temperaturen f{\"u}hren bei beiden Kraftstoffen zu k{\"u}rzeren Z{\"u}ndverz{\"u}gen, der Einfluss dieser Parameter ist jedoch f{\"u}r R100 st{\"a}rker als f{\"u}r Dieselkraftstoff. Voreinspritzungen f{\"u}hren bei beiden Kraftstoffen zu einer Verk{\"u}rzung des Z{\"u}ndverzugs der Haupteinspritzung und zu einer geringeren W{\"a}rmefreisetzungsrate. Am Motorpr{\"u}fstand ist bei gleicher Motorapplikation mit R100 eine geringere Leistung als mit Dieselkraftstoff festzustellen. Nach Angleichung der Motorleistung durch Anhebung der Einspritzmenge von R100 sind im Rohabgas Stickstoffoxid (NOX)- und Kohlenstoffmonoxidemissionen auf gleichem Niveau zu Dieselkraftstoff zu beobachten sowie geringere Partikelemissionen. Unter Verwendung eines DoE Vorgehens kann der Partikel-NOX - trade-off von R100 optimiert und Einstellparameter gefunden werden, in denen sowohl niedrigere NOX als auch niedrigere Partikelemissionen im Vergleich zum Dieselkraftstoff resultieren. Das installierte Abgasnachbehandlungssystem, bestehend aus einem Dieseloxidationskatalysator (DOC), Dieselpartikelfilter (DPF) und selektivem katalytischem Reduktionssystem (SCR), arbeitet f{\"u}r beide Kraftstoffe {\"a}hnlich und es scheint keine Anpassung der Dosierungsstrategie der w{\"a}ssrigen Harnstoffl{\"o}sung notwendig zu sein. Eine Regeneration des Partikelfilters mit R100 war nach Optimierung der Einstellparameter der Drosselklappe m{\"o}glich. Motorkaltstart und Leerlauf sind herausfordernde Betriebsphasen, die f{\"u}r R100 einer weiteren Optimierung bed{\"u}rfen. Eine Temperierung von R100 im Injektor auf 50-60 °C sowie eine Kompensation der Einspritzmenge in Abh{\"a}ngigkeit von der Kraftstofftemperatur sind m{\"o}gliche Verbesserungsmaßnahmen. Zudem kann durch einen fr{\"u}heren Einspritzbeginn von R100 das Verbrennungsverhalten angepasst werden. Die Motorpr{\"u}fstandsuntersuchungen best{\"a}tigen qualitativ die Erkenntnisse die mit dem hydraulischen Druckanstiegsanalysator (HDA), der Hochdruck-Hochtemperatur-Kammer (HDHT-Kammer) und der Konstantvolumenbrennkammer gewonnen wurden. Weitere Untersuchungen sind notwendig, um die Ergebnisse auf einen baugleichen, in einer mobilen Arbeitsmaschine eingebauten Motor zu transferieren, damit Informationen zur Dauerhaltbarkeit unter realen Bedingungen erhalten werden k{\"o}nnen. Weiterf{\"u}hrende Forschungsarbeiten sind im Bereich der Betriebsphasen des Motorkaltstarts und Leerlaufs mit Raps{\"o}lkraftstoff n{\"o}tig, um einen dauerhaft st{\"o}rungsfreien Betrieb in diesen Betriebsphasen zu erreichen. Die erzielten Erkenntnisse deuten darauf hin, dass hier noch viel Verbesserungspotenzial vorhanden ist.}, subject = {Biokraftstoff}, language = {de} } @incollection{ArrietaCastroRillWeber, author = {Arrieta Castro, Abel and Rill, Georg and Weber, Hans I.}, title = {Development of a Robust Integrated Control System to Improve the Stability of Road Vehicles}, series = {Multibody Mechatronic Systems}, volume = {54}, booktitle = {Multibody Mechatronic Systems}, editor = {Carvalho, Jo{\~a}o Carlos Mendes and Martins, Daniel and Simoni, Roberto and Simas, Henrique}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-67566-4}, doi = {10.1007/978-3-319-67567-1_48}, pages = {506 -- 516}, abstract = {Nowadays, new technologies are pushing the road vehicle limits further. Promising applications, e.g., self-driving cars, require a suitable control system that can maintain the vehicle's stability in critical scenarios. In most of current cars, the control systems actuates independently, meaning there is not a coordination or data sharing between them. This approach can produce a conflict between these standalone controllers and thus, no improvements on the vehicle's stability are achieved or even a worse scenario can be generated. In order to overcome these problems, an integrated approach is developed in this work. This integration, defined in this work as Integrated Control (IC), is done by an intelligence coordination of all standalone controllers inside the vehicle, i.e., Anti-Lock Braking System (ABS), Electronic Stability Program (ESP) and Four-Wheel Steering System (4WS). The ABS model was built using Fuzzy logic, for which only three rules were necessary to get a good performance. To design the ESP and the 4WS, the simple handling vehicle model was used as a reference behavior. The IC was designed using the hierarchical approach with two layers, i.e., the upper and lower layer. The upper one, observes the side slip angle and depends of its value the upper layer triggers the ESP or the 4WS. Finally, in order to prove the improvements of the IC system over the non-integrated approach, a full-size vehicle model was used to perform simulation in run-off-road and μ-split scenarios.}, language = {en} } @inproceedings{HacklHirschbergLexetal., author = {Hackl, Andreas and Hirschberg, Wolfgang and Lex, Cornelia and Rill, Georg}, title = {Tyre Dynamics: Model Validation and Parameter Identification}, series = {Proceedings of the European Automotive Congress EAEC-ESFA 2015}, volume = {45}, booktitle = {Proceedings of the European Automotive Congress EAEC-ESFA 2015}, editor = {Andreescu, Cristian and Clenci, Adrian}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-27275-7}, doi = {10.1007/978-3-319-27276-4_20}, pages = {219 -- 232}, abstract = {The present paper deals with the experimental validation of tyre dynamics approaches as it is widely applied in tyre models for vehicle dynamics and handling. Firstly it gives a brief derivation of two modelling principles regarding the deflection velocity in the considered direction of the tyre's deformation. This is than followed by a brief description of the performed measurement procedure. From the measurements, a set of model parameters of the considered tyre, depending on different manoeuvre speeds and frequencies, is identified, where no particular fitting parameters for the tyre dynamics are needed. Based on these model parameters, the related dynamic simulations are carried out. The comparisons show that the applied first-order model describes the behaviour quite well within a certain operation range, whereas the second-order approach cannot deliver better results in spite of the longer computational time. However, for investigations within an enlarged frequency range of the steer input and at high slip angles, a more detailed model is recommended.}, language = {en} } @inproceedings{HopfenspergerDaubnerHerrmannetal., author = {Hopfensperger, Bernhard and Daubner, Andreas and Herrmann, Fabian and Hopkins, Andrew and Mellor, Phil}, title = {Investigation of Shifted PWM Methods for a Dual Three-Phase System to Reduce Capacitor RMS Current}, series = {PCIM Europe Digital Days 2020: International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management: 07.-08.07.2020, Online [proceedings]}, booktitle = {PCIM Europe Digital Days 2020: International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management: 07.-08.07.2020, Online [proceedings]}, publisher = {VDE-Verlag}, address = {Berlin, Offenbach}, isbn = {978-3-8007-5245-4}, pages = {124 -- 131}, abstract = {Mild hybrid automotive topologies containing a 48V high power (>15 kW) electric drive system demand a high integration of power electronics and electrical machine. A multi-phase motor winding topology helps to keep the per-phase operating currents to a reasonable level. Close integration and multi-phase system have led to a drive system with dual 3-phase systems supplied by a common 48V DC-link, which allows to shift PWM patterns for reduction of DC-link capacitor ripple current and size. This paper derives some basic rules for combinations of common PWM methods for dual 3-phase systems without magnetic cross-coupling. Experimental measurements verify simulated results.}, subject = {Elektroantrieb}, language = {en} } @inproceedings{Becke, author = {Becke, Mark}, title = {On Modeling and Least Squares Fitting of Cylinders from Single and Multiple Views Using Contour Line Features}, series = {Intelligent Robotics and Applications}, volume = {9246}, booktitle = {Intelligent Robotics and Applications}, editor = {Liu, Honghai and Kubota, Naoyuki and Zhu, Xiangyang and Dillmann, R{\"u}diger}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-22872-3}, doi = {10.1007/978-3-319-22873-0_33}, pages = {372 -- 385}, abstract = {In this paper, a new method for a minimum-error pose estimation of cylinder axes based on apparent contour line features from multiple views is presented. Novel model equations for both single and particularly multiple views are derived, and based upon these, an algorithm for least squares fitting the model to imaged cylinder contour line features is introduced. The good performance of the proposed algorithm is shown by solving an exemplary fitting problem.}, language = {en} } @inproceedings{BoehmSchorrZimmermannetal., author = {B{\"o}hm, Valter and Schorr, Philipp and Zimmermann, Klaus and Zentner, Lena}, title = {An Approach to the Estimation of the Actuation Parameters for Mobile Tensegrity Robots with Tilting Movement Sequences}, series = {2018 International Conference on Reconfigurable Mechanisms and Robots (ReMAR); 20-22 June 2018; Delft, Netherlands}, booktitle = {2018 International Conference on Reconfigurable Mechanisms and Robots (ReMAR); 20-22 June 2018; Delft, Netherlands}, publisher = {IEEE}, doi = {10.1109/REMAR.2018.8449871}, pages = {1 -- 8}, abstract = {This paper deals with the locomotion by tilting sequences of shape-variable compliant tensegrity structures. The shape of these structures is controlled by manipulating their prestress state. The tensegrity structure is tilting as consequence of a suitable variation of its shape. By multiple repetition of such tilting sequences a motion is generated. Quasi-static considerations for the considered structures are presented in order to estimate the actuation parameters. For a proper number of actuators this quasi-static approach enables an analytical calculation of the actuation parameters of the structure in order to control the geometrical configuration as required. As an example a two-dimensional tensegrity structure which is in contact with a horizontal plane due to gravity is considered. By successive tilting sequences a uniaxial motion results. The excitation of the structure is calculated for a given change of shape with the quasi-static analysis. The according results are compared with transient dynamic simulations. Qualitative conclusions about the motion behavior and the usability of the quasi-static approach are given.}, language = {en} } @inproceedings{Briem, author = {Briem, Ulrich}, title = {Fatigue Behaviour of Rope Wires}, series = {Proceedings of the OIPEEC Conference, La Rochelle, France, 12th - 15th March 2019}, booktitle = {Proceedings of the OIPEEC Conference, La Rochelle, France, 12th - 15th March 2019}, editor = {Dohm, Martin}, publisher = {OIPEEC}, abstract = {The rope curve line of a tensioned rope can be described by means of the catenary curve. Opposed to that, the curved line of a free bent rope cannot be described by an analytical function. Practical applications of free bending are for example at tail ropes at the bottom of shaft in rope drives with traction sheaves. The question whether the maximum diameter of rope loop is small enough for the diameter of the shaft is highly interesting. In [1] a method was presented to calculate the curved line of free bent ropes numerically by help of energy methods. An analytical description of rope curve line would be very helpful. Beginning with the structure of a rope curve line of tensioned rope (catenary curve) and considering the influence of bending stiffness, the structure of an analytical equation for the curve line of a free bent rope will be developed. The main focus of this paper is to develop and to describe the structure of such an analytical equation. To get a first idea about the values of the constants in that analytical equation a few test results were evaluated. But these equations consider the static rope behavior only. Due to dynamic effects in the rope while running through the loop at the bottom of a shaft, pendulousness of the tail rope occurs.}, language = {en} } @inproceedings{Briem2019, author = {Briem, Ulrich}, title = {Mathematical Approach to Curve Line of free bent Ropes}, series = {Proceedings of the OIPEEC Conference, La Rochelle, France, 12th - 15th March 2019}, booktitle = {Proceedings of the OIPEEC Conference, La Rochelle, France, 12th - 15th March 2019}, editor = {Dohm, Martin}, publisher = {OIPEEC}, year = {2019}, abstract = {The rope curve line of a tensioned rope can be described by means of the catenary curve. Opposed to that, the curved line of a free bent rope cannot be described by an analytical function. Practical applications of free bending are for example at tail ropes at the bottom of shaft in rope drives with traction sheaves. The question whether the maximum diameter of rope loop is small enough for the diameter of the shaft is highly interesting. In [1] a method was presented to calculate the curved line of free bent ropes numerically by help of energy methods. An analytical description of rope curve line would be very helpful. Beginning with the structure of a rope curve line of tensioned rope (catenary curve) and considering the influence of bending stiffness, the structure of an analytical equation for the curve line of a free bent rope will be developed. The main focus of this paper is to develop and to describe the structure of such an analytical equation. To get a first idea about the values of the constants in that analytical equation a few test results were evaluated. But these equations consider the static rope behavior only. Due to dynamic effects in the rope while running through the loop at the bottom of a shaft, pendulousness of the tail rope occurs.}, language = {en} } @inproceedings{SchneiderMuehlbauerSittletal., author = {Schneider, Sebastian and M{\"u}hlbauer, Christian and Sittl, Christopher and Rottengruber, Hermann and Rabl, Hans-Peter and Wagner, Marcus and Verhey, Jesko L.}, title = {Tickerger{\"a}uschanalyse an einem Otto-DI-Motor mittels empirischer Bewertungsformel}, series = {Motor- und Aggregate-Akustik: 11. Magdeburger Symposium, Tagungsband}, booktitle = {Motor- und Aggregate-Akustik: 11. Magdeburger Symposium, Tagungsband}, editor = {Rottengruber, Hermann and Luft, Tommy and Schneider, Sebastian}, publisher = {Otto-von-Guericke-Universit{\"a}t}, address = {Magdeburg}, isbn = {978-3-948749-02-6}, doi = {10.25673/36611}, pages = {65 -- 86}, abstract = {Beim Kauf eines Pkw wird der akustische Qualit{\"a}tseindruck eines Fahrzeugantriebstrangs stetig relevanter. Die wahrgenommene Ger{\"a}uschqualit{\"a}t des Motoraggregates nimmt hierbei eine Schl{\"u}sselrolle ein. Aufgrund der Auspr{\"a}gung einzelner St{\"o}rger{\"a}usche wird jene Ger{\"a}uschqualit{\"a}t negativ beeinflusst. Diese als unangenehm empfundenen Ger{\"a}uschkomponenten gilt es im Rahmen der Fahrzeugentwicklung weiter zu reduzieren, wobei die Identifikation und Bewertung st{\"o}render Ger{\"a}uschanteile am Motorgesamtger{\"a}usch Voraussetzungen f{\"u}r eine effektive Akustikoptimierung sind. Vor allem das impulshafte Tickerger{\"a}usch wird bei Otto-DI-Motoren als besonders l{\"a}stig eingestuft, weswegen dieser Beitrag darauf abzielt, die tickernden Ger{\"a}uschanteile aus dem Gesamtger{\"a}usch zu analysieren und zu bewerten. Hierzu wurde eine empirische Formel entwickelt, welche die tickernden Ger{\"a}uschanteile in ihrer Intensit{\"a}t in Grenzen einstufen kann. Diese ist rein empfindungsbasiert und besteht aus der Impulshaftigkeit, der Lautheit sowie der Sch{\"a}rfe des Motorgesamtger{\"a}usches. Wie auch bei anderen psychoakustischen Bewertungsskalen wurde die Benotung von 1 (sehr tickernd) bis 10 (nicht tickernd) vorgenommen. Anhand von H{\"o}rversuchen mithilfe einer Expertenjury konnte die Tickerger{\"a}uschbewertungsformel anschließend verifiziert werden. Hiernach kann pr{\"a}zise ausgesagt werden, in welchen Motorkennfeldbereichen das Tickerger{\"a}usch die Angenehmheit des Motorgesamtger{\"a}usches untergr{\"a}bt.}, language = {de} } @inproceedings{SchneiderHotsLuftetal., author = {Schneider, Sebastian and Hots, Jan and Luft, Tommy and Rottengruber, Hermann and Verhey, Jesko L. and Rabl, Hans-Peter}, title = {Entwicklung einer empirischen Formel zur Bewertung der Tickerger{\"a}uschanteile von Motorger{\"a}uschen}, series = {DAGA 2019 - 45. Jahrestagung f{\"u}r Akustik, 8.-21. M{\"a}rz 2019, Rostock}, volume = {45}, booktitle = {DAGA 2019 - 45. Jahrestagung f{\"u}r Akustik, 8.-21. M{\"a}rz 2019, Rostock}, publisher = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, isbn = {978-3-939296-14-0}, pages = {643 -- 646}, language = {de} } @inproceedings{RiegerMuehlbauerWeberetal., author = {Rieger, Anna and M{\"u}hlbauer, Christian and Weber, Rainer and Rabl, Hans-Peter}, title = {Measures to Address the Dissonance Perception of Multiple Tonal Components in Sounds}, series = {DAGA 2019 - 45. Jahrestagung f{\"u}r Akustik, 18.-21. M{\"a}rz 2019, Rostock}, volume = {45}, booktitle = {DAGA 2019 - 45. Jahrestagung f{\"u}r Akustik, 18.-21. M{\"a}rz 2019, Rostock}, publisher = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, pages = {375 -- 378}, language = {en} } @inproceedings{RiegerOetjenvandeParetal., author = {Rieger, Anna and Oetjen, Arne and van de Par, Steven and Rabl, Hans-Peter}, title = {Einfluss der Dissonanz auf die Wahrnehmung der Ger{\"a}uschqualit{\"a}t}, series = {Fortschritte der Akustik DAGA 2022: 48. Jahrestagung f{\"u}r Akustik, 21. - 24. M{\"a}rz 2022, Stuttgart und Online}, volume = {48}, booktitle = {Fortschritte der Akustik DAGA 2022: 48. Jahrestagung f{\"u}r Akustik, 21. - 24. M{\"a}rz 2022, Stuttgart und Online}, publisher = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, address = {Stuttgart}, language = {de} } @inproceedings{RiegerOetjenvandeParetal., author = {Rieger, Anna and Oetjen, Arne and van de Par, Steven and Rabl, Hans-Peter}, title = {Geh{\"o}rbezogene Modellierung der Dissonanz}, series = {Tagungsband DAGA 2021: 47. Jahrestagung f{\"u}r Akustik, 15.-18. August 2021, Wien und Online}, volume = {47}, booktitle = {Tagungsband DAGA 2021: 47. Jahrestagung f{\"u}r Akustik, 15.-18. August 2021, Wien und Online}, publisher = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, pages = {1034 -- 1037}, language = {de} } @misc{AltmannGadererRabl, author = {Altmann, Robert and Gaderer, Matthias and Rabl, Hans-Peter}, title = {Pr{\"u}fstandsuntersuchungen an einem DEUTZ NRMM Motor mit Raps{\"o}lkraftstoff und Optimierung des Betriebs- und Emissionsverhaltens durch statistische Versuchsplanung}, series = {18. Internationaler Fachkongress "Kraftstoffe der Zukunft 2021" - digital \& international vernetzt!, online}, journal = {18. Internationaler Fachkongress "Kraftstoffe der Zukunft 2021" - digital \& international vernetzt!, online}, language = {de} } @misc{AltmannGebhard, author = {Altmann, Robert and Gebhard, J{\"u}rgen}, title = {Ph{\"a}nomenologische Untersuchung des Einspritzprozesses eines Injektors aus dem Off-Highway-Segment mit Diesel- und Raps{\"o}lkraftstoff}, series = {16. Internationaler Fachkongress "Kraftstoffe der Zukunft 2019", Berlin}, journal = {16. Internationaler Fachkongress "Kraftstoffe der Zukunft 2019", Berlin}, language = {de} } @inproceedings{DiamantidisLenziSykora, author = {Diamantidis, Dimitris and Lenzi, Daniele and S{\´y}kora, Miroslav}, title = {Optimal decisions based on monitoring - case study of steel roof}, series = {Proceedings of the Joint COST TU1402-TU1406 - IABSE WC1 Workshop, Zagreb 2-3 March 2017}, booktitle = {Proceedings of the Joint COST TU1402-TU1406 - IABSE WC1 Workshop, Zagreb 2-3 March 2017}, doi = {10.5592/CO/BSHM2017.4.7}, pages = {4.7-1 -- 4.7-7}, abstract = {Monitoring of structures and related decisions based on cost optimization are discussed in this contribution. Many research publications and experimental data are currently available on inspection and on monitoring and they represent the outcome of the remarkable work done. Not all the topics of interest are widely debated and implemented in standards. The current state-of-practice in standards is summarized and aspects to be included in future recommendations are proposed. The implementation of risk-based decisions is illustrated in a case study dealing with a stadium roof in Northern Italy. Snow actions are important especially in northern and mountainous regions where heavy snowfalls and related accumulation result to considerable loads. As the roof structure fails to comply with the requirements of Eurocodes, a permanent monitoring system has been installed to allow for real time evaluation of the reliability level of the structure. The system supplies the necessary information supporting immediate decisions on closure of the stadium in case of an extraordinary snow load. Cost-optimal decisions regarding the closure of the stadium are analysed based on a limit state function, on probabilistic models for the influencing parameters including measurement uncertainty, economic losses related to closure and failure consequences. The results demonstrate the potential of the use of the monitoring systems and probabilistic reliability analysis in order to support decisions and highlight the need for their implementation in future standards.}, language = {en} } @inproceedings{HolickyDiamantidisSykora, author = {Holick{\´y}, Milan and Diamantidis, Dimitris and S{\´y}kora, Miroslav}, title = {Effects of Quality Control on Reliability of Reinforced Concrete Structures according to Eurocodes}, series = {fib Symposium 2016 : Performance-Based Approaches for Concrete Structures, 14, 2016, Cape town}, booktitle = {fib Symposium 2016 : Performance-Based Approaches for Concrete Structures, 14, 2016, Cape town}, abstract = {The effect of quality control on structural reliability represents an increasingly important concern of designers and thus is investigated in this contribution, focusing on reinforced concrete structures. Recent European documents for structural design - Eurocodes, fib Model Code 2010 and ISO 2394:2015 for general principles on structural reliability indicate that the partial factors may be adjusted to available information on the quality control of structures. In particular, the partial factors for concrete and steel strength may be significantly reduced taking into account actual execution quality and related available data. Using probabilistic methods of structural reliability, effects for execution quality are investigated in this contribution considering two fundamental reinforced concrete members: a beam (or slab) exposed to bending and a short column exposed to compression. It is shown that the reliability of reinforced concrete members may vary with the load ratio of variable and permanent actions. It appears also that the structural members of a basic quality, designed using unreduced partial factors, have a greater reliability level than the members of an increased quality, designed using the partial factors reduced according to EN 1992 1 1. This provides the basis for recommendations for further code developments.}, language = {en} } @inproceedings{Neidhart, author = {Neidhart, Thomas}, title = {Bodenphysikalische und bodenmechanische Anforderungen an ZFSV (Fl{\"u}ssigboden) als Bettungsmaterialien erdverlegter Hochspannungsleitungen}, series = {Rohrleitungen in digitalen Arbeitswelten : Tagungsband zum 31. Oldenburger Rohrleitungsforum 2017}, booktitle = {Rohrleitungen in digitalen Arbeitswelten : Tagungsband zum 31. Oldenburger Rohrleitungsforum 2017}, editor = {Wegener, Thomas}, publisher = {Vulkan Verlag}, address = {Essen}, isbn = {978-3-8027-2865-5}, pages = {337}, language = {de} } @article{EbnerElsner, author = {Ebner, Lena and Elsner, Michael}, title = {Thermische Energiespeicher: W{\"a}rmespeicherung in Kugelsch{\"u}ttungen. Numerische Simulation der Stromungs-, Warmetransport- und Entstaubungsvorg{\"a}nge}, series = {BWK. Das Energie-Fachmagazin}, volume = {66}, journal = {BWK. Das Energie-Fachmagazin}, number = {9}, publisher = {VDI-Verlag}, pages = {40 -- 43}, abstract = {Festbettspeicher bieten die M{\"o}glichkeit, thermische Energie auf einem hohen Temperaturniveau zu speichern. Die oft kugelf{\"o}rmigen Sch{\"u}ttg{\"u}ter bestehen aus Materialien hoher Dichte und W{\"a}rmekapazit{\"a}t. Neben der W{\"a}rmespeicherung k{\"o}nnen mithilfe dieser Sch{\"u}ttungen partikelbeladene Abgase entstaubt werden. Die Str{\"o}mungs-, W{\"a}rmetransport- und Entstaubungsvorg{\"a}nge bei der Speicherung von W{\"a}rme in einem Sch{\"u}ttschichtw{\"a}rme{\"u}bertrager werden in Zusammenarbeit mit Fraunhofer Umsicht, Institutsteil Sulzbach-Rosenberg, untersucht. Einen entscheidenden Aspekt der Arbeiten stellt die numerische Simulation der im W{\"a}rme{\"u}bertrager ablaufenden Vorg{\"a}nge dar. Die transiente Simulation von Sch{\"u}ttschichtw{\"a}rme{\"u}bertragern ist nur mit Vereinfachungen m{\"o}glich, da aufgrund der komplexen Geometrie und der daraus folgenden feinen Vernetzung eine enorme Rechenleistung ben{\"o}tigt wird. Bei den in diesem Beitrag vorgestellten Ergebnissen werden die physikalischen Vorgange in einem Ausschnitt der Sch{\"u}ttschicht simuliert, in dem die Kugelgeometrie detailliert modelliert ist. Die Ergebnisse der numerischen Simulation werden durch analytische Berechnungen aus der Literatur best{\"a}tigt. Eine Reihe von Parametervariationen zeigen die Einfl{\"u}sse verschiedener Gr{\"o}ßen beispielsweise auf den Druckverlust sowie den Unterschied zwischen radialer und axialer Durchstr{\"o}mung einer Sch{\"u}ttschicht. Die Entstaubung partikelbeladener Gase innerhalb einer Sch{\"u}ttschicht wird zun{\"a}chst anhand einer Einzelkugel untersucht; die Erweiterung auf die Entstaubung in einer Kugelpackung ist vorgesehen. Die Ergebnisse der numerischen Simulationen sollen mit den an einem Versuchsstand experimentell bestimmten Daten verglichen werden.}, language = {de} }