@inproceedings{Afanasev, author = {Afanasev, Anna}, title = {Force-oriented 3D printing of continuous fiber-reinforced plastic structures}, series = {Applied Research Conference 2019 - ARC 2019, 08 July 2019, Regensburg}, booktitle = {Applied Research Conference 2019 - ARC 2019, 08 July 2019, Regensburg}, editor = {Mottok, J{\"u}rgen and Reichenberger, Marcus}, publisher = {Pro Business GmbH}, address = {Berlin}, isbn = {978-3-96409-182-6}, pages = {213 -- 218}, subject = {Faserverbundwerkstoff}, language = {en} } @article{SchimmerLadewigMotschetal., author = {Schimmer, Florian and Ladewig, Sven and Motsch, Nicole and Hausmann, Joachim M. and Ehrlich, Ingo}, title = {Comparison of Low-Velocity Impact Damage Behavior of Unidirectional Carbon Fiber-Reinforced Thermoset and Thermoplastic Composites}, series = {Key Engineering Materials}, volume = {809}, journal = {Key Engineering Materials}, publisher = {Trans Tech Publications}, issn = {1662-9795}, doi = {10.4028/www.scientific.net/KEM.809.9}, pages = {9 -- 14}, abstract = {This paper investigates the damage behavior of thermoset and thermoplastic fiber-reinforced composites. The specimens were subjected to low-velocity impacts (LVI) to produce barely visible impact damages (BVID). To compare the dependency of the matrix system and the laminate lay-up on the impact damage, four test series were set up. Therefore, laminates with an epoxy (EP) and a polyether ether ketone (PEEK) matrix in a quasi-isotropic (QI) [+45/0/-45/90]2s and an orthotropic (OT) fiber lay-up [0/90]4s were manufactured. To eliminate the influence of variant fiber systems, the thermoplastic tape and the thermoset prepreg contain similar carbon fibers (CF). After impact testing with three different impact energies, inner damages were investigated by using ultrasonic analyses. To get a deeper understanding of the interior damage mechanisms, cross sections of the damaged areas were examined via reflected light microscopy. By using these destructive and non-destructive test methods, significant differences in the damage behavior of composites with thermoplastic and thermoset matrix systems were identified for both laminate lay-ups.}, language = {en} } @inproceedings{Seppenhauser, author = {Seppenhauser, P.}, title = {Examinations of the Printer Head Prototype for UV Resins with Continous Fiber-Reinforcement}, series = {Applied Research Conference 2019 - ARC 2019, 8 July 2019, Regensburg}, booktitle = {Applied Research Conference 2019 - ARC 2019, 8 July 2019, Regensburg}, editor = {Mottok, J{\"u}rgen and Reichenberger, Marcus}, publisher = {Pro Business GmbH}, address = {Berlin}, isbn = {978-3-96409-182-6}, pages = {241 -- 248}, subject = {3D-Druck}, language = {en} } @article{RomanoEhrlichGebbeken, author = {Romano, Marco and Ehrlich, Ingo and Gebbeken, Norbert}, title = {Parametric characterization of a mesomechanic kinematic in plain and twill weave 2/2 reinforced composites by FE-calculations}, series = {Archives of Materials Science and Engineering (ArchivesMSE)}, volume = {97}, journal = {Archives of Materials Science and Engineering (ArchivesMSE)}, number = {1-2}, publisher = {Index Copernicus}, issn = {1897-2764}, doi = {10.5604/01.3001.0013.2869}, pages = {20 -- 38}, abstract = {Purpose: A parametric characterization of a mesomechanic kinematic caused by ondulation in fabric reinforced composites is investigated by numerical investigations. Design/methodology/approach: Due to the definition of plain representative sequences of balanced plain-weave and twill-weave 2/2 fabric reinforced single layers based on sines the variable geometric parameters are the amplitude and the length of the ondulation. Findings: The mesomechanic kinematic can be observed in the FE analyses for both kinds of fabric constructions. Research limitations/implications: The FE analyses consider elasticity and contraction due to Poisson effects, respectively, of the model under selected longitudinal strains. Practical implications: The results are evaluated at relevant positions on the centre-line of the ondulated warp-yarn of the plain representative model. A direct and linear coupling in case of the transversal kinematic behaviour, and thereby a corresponding definite reduction of the evaluated longitudinal strains in terms of the difference of the applied and determined longitudinal strains is identified. Originality/value: Both characteristic purely kinematic reactions due to geometric constraints directly depend on the introduced degree of ondulation. This non-dimensional parameter relates amplitude and length of one complete ondulation, and thus represents the intensity of the ondulation of the respective fabric construction.}, language = {en} } @techreport{SchlampEhrlich, author = {Schlamp, Matthias and Ehrlich, Ingo}, title = {Analyse des Impact-Verhaltens gekr{\"u}mmter Strukturbauteile von Luftfahrzeugen zur Entwicklung eines Struktur{\"u}berwachungssystems f{\"u}r faserverst{\"a}rkte Kunststoffe - BIRD}, series = {Forschung 2019 / Ostbayerische Technische Hochschule Regensburg}, journal = {Forschung 2019 / Ostbayerische Technische Hochschule Regensburg}, editor = {Baier, Wolfgang}, publisher = {VMK Verlag f{\"u}r Marketing \& Kommunikation GmbH \& Co. KG}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-9818209-6-6}, pages = {40 -- 41}, abstract = {Die in Flugvorausrichtung weisenden Bauteile von Luftfahrzeugen sind oftmals durch Einschl{\"a}ge aufgrund von Vogelschlag, Hagel oder aufgewirbelten Kleinteilen gef{\"a}hrdet. Diese Einschl{\"a}ge, sogenannte Impacts, weisen bei faserverst{\"a}rkten Kunststoffen ein stark kr{\"u}mmungs- und materialabh{\"a}ngiges Verhalten und Schadensausmaß auf. Impact-Sch{\"a}digungen f{\"u}hren oftmals zu hohen Reparaturkosten, welche durch eine genauere Kenntnis des Schadens verringert werden k{\"o}nnen. Zur Klassifizierung dieser Sch{\"a}digungen steht dabei vor allem das auftretende Frequenz signal des Impacts im Fokus der Untersuchungen.}, language = {de} } @techreport{SieglEhrlich, author = {Siegl, Marco and Ehrlich, Ingo}, title = {Internationale Forschung zum Biege- und Deformationsverhalten von faserverst{\"a}rkten Kunststoffrohren}, series = {Forschung 2019 / OTH Regensburg}, journal = {Forschung 2019 / OTH Regensburg}, editor = {Baier, Wolfgang}, publisher = {VMK Verlag f{\"u}r Marketing \& Kommunikation}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-9818209-6-6}, pages = {42 -- 43}, language = {de} } @inproceedings{LindnerBerndtJungbaueretal., author = {Lindner, Matthias and Berndt, Dominik and Jungbauer, Bastian and Ehrlich, Ingo and Schreiner, Rupert and Pipa, Andrei V. and Hink, R{\"u}diger and Foest, R{\"u}diger and Brandenburg, Ronny and Max, Alexander and Caspari, Ralf}, title = {Fabrication, surface integration and testing of miniaturized dielectric barrier discharge plasma actuators for active flow control applications}, series = {AIAA Aviation 2019 Forum, 17-21 June 2019, Dallas, Texas}, booktitle = {AIAA Aviation 2019 Forum, 17-21 June 2019, Dallas, Texas}, doi = {10.2514/6.2019-2998}, language = {en} }