@article{EigenbergerFelthausSchratzenstalleretal., author = {Eigenberger, Andreas and Felthaus, Oliver and Schratzenstaller, Thomas and Haerteis, Silke and Utpatel, Kirsten and Prantl, Lukas}, title = {The Effects of Shear Force-Based Processing of Lipoaspirates on White Adipose Tissue and the Differentiation Potential of Adipose Derived Stem Cells}, series = {cells}, volume = {11}, journal = {cells}, number = {16}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/cells11162543}, pages = {13}, abstract = {Autologous lipotransfer is a promising method for tissue regeneration, because white adipose tissue contains a heterogeneous cell population, including mesenchymal stem cells, endothelial cells, immune cells, and adipocytes. In order to improve the outcome, adipose tissue can be processed before application. In this study, we investigated changes caused by mechanical processing. Lipoaspirates were processed using sedimentation, first-time centrifugation, shear-force homogenization, and second-time centrifugation. The average adipocyte size, stromal vascular cell count, and adipocyte depot size were examined histologically at every processing step. In addition, the adipose derived stem cells (ADSCs) were isolated and differentiated osteogenically and adipogenically. While homogenization causes a disruption of adipocyte depots, the shape of the remaining adipocytes is not changed. On average, these adipocytes are smaller than the depot adipocytes, they are surrounded by the ECM, and therefore mechanically more stable. The volume loss of adipocyte depots leads to a significant enrichment of stromal vascular cells such as ADSCs. However, the mechanical processing does not change the potential of the ADSCs to differentiate adipogenically or steogenically. It thus appears that mechanically processed lipoaspirates are promising for the reparation of even mechanically stressed tissue as that found in nasolabial folds. The changes resulting from the processing correspond more to a filtration of mechanically less stable components than to a manipulation of the tissue.}, language = {en} } @article{WiesentSchultheissSchmidetal., author = {Wiesent, Lisa and Schultheiss, Ulrich and Schmid, Christof and Schratzenstaller, Thomas and Nonn, Aida}, title = {Experimentally validated simulation of coronary stents considering different dogboning ratios and asymmetric stent positioning}, series = {PlOS One}, volume = {14}, journal = {PlOS One}, number = {10}, publisher = {PLOS}, doi = {10.1371/journal.pone.0224026}, pages = {1 -- 25}, abstract = {In-stent restenosis remains a major problem of arteriosclerosis treatment by stenting. Expansion-optimized stents could reduce this problem. With numerical simulations, stent designs/ expansion behaviours can be effectively analyzed. For reasons of efficiency, simplified models of balloon-expandable stents are often used, but their accuracy must be challenged due to insufficient experimental validation. In this work, a realistic stent life-cycle simulation has been performed including balloon folding, stent crimping and free expansion of the balloon-stent-system. The successful simulation and validation of two stent designs with homogenous and heterogeneous stent stiffness and an asymmetrically positioned stent on the balloon catheter confirm the universal applicability of the simulation approach. Dogboning ratio, as well as the final dimensions of the folded balloon, the crimped and expanded stent, correspond well to the experimental dimensions with only slight deviations. In contrast to the detailed stent life-cycle simulation, a displacement-controlled simulation can not predict the transient stent expansion, but is suitable to reproduce the final expanded stent shape and the associated stress states. The detailed stent life-cycle simulation is thus essential for stent expansion analysis/optimization, whereas for reasons of computational efficiency, the displacement-controlled approach can be considered in the context of pure stress analysis.}, subject = {Stent}, language = {en} } @article{GeithSwidergalHochholdingeretal., author = {Geith, Markus A. and Swidergal, Krzysztof and Hochholdinger, Bernd and Schratzenstaller, Thomas and Wagner, Marcus and Holzapfel, Gerhard A.}, title = {On the importance of modeling balloon folding, pleating, and stent crimping: An FE study comparing experimental inflation tests}, series = {International Journal for Numerical Methods in Biomedical Engineering}, volume = {35}, journal = {International Journal for Numerical Methods in Biomedical Engineering}, number = {11}, publisher = {Wiley}, doi = {10.1002/cnm.3249}, abstract = {Finite element (FE)-based studies of preoperative processes such as folding,pleating, and stent crimping with a comparison with experimental inflation tests are not yet available. Therefore, a novel workflow is presented in which residual stresses of balloon folding and pleating, as well as stent crimping, and the geometries of all contact partners were ultimately implemented in an FE code to simulate stent expansion by using an implicit solver. The numerical results demonstrate that the incorporation of residual stresses and strains experienced during the production step significantly increased the accuracy of the subsequent simulations, especially of the stent expansion model. During the preoperative processes, stresses inside the membrane and the stent material also reached a rather high level. Hence, there can be no presumption that balloon catheters or stents are undamaged before the actual surgery. The implementation of the realistic geometry, in particular the balloon tapers, and the blades of the process devices improved the simulation of the expansion mech-anisms, such as dogboning, concave bending, or overexpansion of stent cells. This study shows that implicit solvers are able to precisely simulate the mentioned preoperative processes and the stent expansion procedure without a preceding manipulation of the simulation time or physical mass.}, subject = {Stent}, language = {en} } @article{GeithSommerSchratzenstalleretal., author = {Geith, Markus A. and Sommer, Gerhard and Schratzenstaller, Thomas and Holzapfel, Gerhard A.}, title = {Biomechanical and structural quantification of vascular damage: A unique investigation of stent implantation}, series = {Artery Research}, volume = {20}, journal = {Artery Research}, number = {Issue C}, doi = {10.1016/j.artres.2017.10.025}, pages = {50}, language = {en} } @article{ZentgrafNuetzelMuehlbaueretal., author = {Zentgraf, Jan and N{\"u}tzel, Florian and M{\"u}hlbauer, Nico and Schultheiss, Ulrich and Grad, Marius and Schratzenstaller, Thomas}, title = {Surface Treatment of Additively Manufactured Polyetheretherketone (PEEK) by Centrifugal Disc Finishing Process: Identification of the Key Parameters}, series = {Polymers}, volume = {16}, journal = {Polymers}, publisher = {MDPI}, address = {Basel}, issn = {2073-4360}, doi = {10.3390/polym16162348}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-73959}, abstract = {Polyetheretherketone is a promising material for implants due to its good mechanical properties and excellent biocompatibility. Its accessibility to a wide range of applications is facilitated by the ability to process it with an easy-to-use manufacturing process such as fused filament fabrication. The elimination of disadvantages associated with the manufacturing process, such as a poor surface quality, is a main challenge to deal with. As part of the mass finishing process, centrifugal disc finishing has demonstrated good results in surface optimization, making it a promising candidate for the post-processing of additively manufactured parts. The objective of this study is to identify the key parameters of the centrifugal disc finishing process on the waviness of additively manufactured PEEK specimens, which has not been investigated previously. The waviness of the specimen was investigated by means of confocal laser scanning microscopy (CLSM), while weight loss was additionally tracked. Six parameters were investigated: type, amount and speed of media, use of compound, amount of water and time. Type of media, time and speed were found to significantly influence waviness reduction and weight loss. Surface electron microscopy images demonstrated the additional effects of deburring and corner rounding. Results on previous studies with specimens made of metal showed similar results. Further investigation is required to optimize waviness reduction and polish parts in a second post-processing step.}, language = {en} } @article{WiesentSchultheissLullaetal., author = {Wiesent, Lisa and Schultheiß, Ulrich and Lulla, Philipp and Noster, Ulf and Schratzenstaller, Thomas and Schmid, Christof and Nonn, Aida and Spear, Ashley}, title = {Computational analysis of the effects of geometric irregularities and post-processing steps on the mechanical behavior of additively manufactured 316L stainless steel stents}, series = {PLoS ONE}, volume = {15}, journal = {PLoS ONE}, number = {12}, publisher = {PLOS}, doi = {10.1371/journal.pone.0244463}, pages = {1 -- 30}, abstract = {Advances in additive manufacturing enable the production of tailored lattice structures and thus, in principle, coronary stents. This study investigates the effects of process-related irregularities, heat and surface treatment on the morphology, mechanical response, and expansion behavior of 316L stainless steel stents produced by laser powder bed fusion and provides a methodological approach for their numerical evaluation. A combined experimental and computational framework is used, based on both actual and computationally reconstructed laser powder bed fused stents. Process-related morphological deviations between the as-designed and actual laser powder bed fused stents were observed, resulting in a diameter increase by a factor of 2-2.6 for the stents without surface treatment and 1.3-2 for the electropolished stent compared to the as-designed stent. Thus, due to the increased geometrically induced stiffness, the laser powder bed fused stents in the as-built (7.11 ± 0.63 N) or the heat treated condition (5.87 ± 0.49 N) showed increased radial forces when compressed between two plates. After electropolishing, the heat treated stents exhibited radial forces (2.38 ± 0.23 N) comparable to conventional metallic stents. The laser powder bed fused stents were further affected by the size effect, resulting in a reduced yield strength by 41\% in the as-built and by 59\% in the heat treated condition compared to the bulk material obtained from tensile tests. The presented numerical approach was successful in predicting the macroscopic mechanical response of the stents under compression. During deformation, increased stiffness and local stress concentration were observed within the laser powder bed fused stents. Subsequent numerical expansion analysis of the derived stent models within a previously verified numerical model of stent expansion showed that electropolished and heat treated laser powder bed fused stents can exhibit comparable expansion behavior to conventional stents. The findings from this work motivate future experimental/numerical studies to quantify threshold values of critical geometric irregularities, which could be used to establish design guidelines for laser powder bed fused stents/lattice structures.}, subject = {Koronarendoprothese}, language = {en} } @article{GeithEckmannHaspingeretal., author = {Geith, Markus A. and Eckmann, Jakob D. and Haspinger, Daniel Ch. and Agrafiotis, Emmanouil and Maier, Dominik and Szabo, Patrick and Sommer, Gerhard and Schratzenstaller, Thomas and Holzapfel, Gerhard A.}, title = {Experimental and mathematical characterization of coronary polyamide-12 balloon catheter membranes}, series = {PLoS One}, volume = {15}, journal = {PLoS One}, number = {6}, publisher = {PLOS}, doi = {10.1371/journal.pone.0234340}, pages = {1 -- 22}, abstract = {The experimental quantification and modeling of the multiaxial mechanical response of polymer membranes of coronary balloon catheters have not yet been carried out. Due to the lack of insights, it is not shown whether isotropic material models can describe the material response of balloon catheter membranes expanded with nominal or higher, supra-nominal pressures. Therefore, for the first time, specimens of commercial polyamide-12 balloon catheters membranes were investigated during uniaxial and biaxial loading scenarios. Furthermore, the influence of kinematic effects on the material response was observed by comparing results from quasi-static and dynamic biaxial extension tests. Novel clamping techniques are described, which allow to test even tiny specimens taken from the balloon membranes. The results of this study reveal the semi-compliant, nonlinear, and viscoelastic character of polyamide-12 balloon catheter membranes. Above nominal pressure, the membranes show a pronounced anisotropic mechanical behavior with a stiffer response in the circumferential direction. The anisotropic feature intensifies with an increasing strain-rate. A modified polynomial model was applied to represent the realistic mechanical response of the balloon catheter membranes during dynamic biaxial extension tests. This study also includes a compact set of constitutive model parameters for the use of the proposed model in future finite element analyses to perform more accurate simulations of expanding balloon catheters.}, language = {en} } @article{Goertler, author = {G{\"o}rtler, Michael}, title = {Politische Erwachsenenbildung und Zeit}, series = {Zeitschrift f{\"u}r Weiterbildungsforschung (ZfW)}, journal = {Zeitschrift f{\"u}r Weiterbildungsforschung (ZfW)}, number = {1}, publisher = {Springer}, organization = {Springer}, doi = {10.1007/s40955-016-0052-2}, pages = {9 -- 25}, abstract = {Der Beitrag fokussiert die Bedeutung von Zeit f{\"u}r die politische Erwachsenenbildung. Angesichts aktueller soziokultureller und sozio{\"o}konomischer Herausforderungen - besonders: der {\"O}konomisierung und Beschleunigung im Kontext von Bildung und Lernen - ergeben sich eine ganze Reihe von dr{\"a}ngenden Zeitfragen. Der Bedeutung von Zeit wird in der Erwachsenenbildung und der Politischen Bildung jedoch bisher wenig Aufmerksamkeit geschenkt. Aus diesem Grund wird diese Fragestellung im Beitrag vertieft. Erstens werden die Situation der politischen Erwachsenenbildung und zweitens der Forschungsstand untersucht. Ausgehend von den Befunden werden drittens drei Zug{\"a}nge herausgearbeitet, welche die Bedeutung von Zeit f{\"u}r die politische Erwachsenenbildung sichtbar machen: Politische Bildung als Prozess und Verz{\"o}gerung sowie Zeit als Gegenstand, um die Zeitlichkeit von Gesellschaft und Politik zu verstehen und zu beurteilen, um sich an der Gestaltung der Zeitstrukturen zu beteiligen. Der Beitrag endet mit einem Ausblick und offenen Fragen, die sich an die zeittheoretischen {\"U}berlegungen anschließen. The article focusses on the importance of time for the political adult education. Current socio-cultural and socio-economic challenges - in particular: the commodification and acceleration in the context of education and learning - results in a wide range of pressing time issues. However the adult education und the political education pay little attention to the importance of time. For this reason, this issue will be deepened in the article. First, the situation of the political adult education and secondly, the state of research are examined. On the base of the findings, three approaches are pointed out, which emphasize the importance of time for the political adult education: political education as a process and as a deceleration and also as a subject to understand and judge the temporality of politics and society as a necessary condition to participate in shaping the time structures. The paper ends with an outlook and open-ended questions, which adjoin the time theoretical considerations.}, language = {de} } @article{Goertler, author = {G{\"o}rtler, Michael}, title = {Soziale Arbeit, Zeit und Nachhaltigkeit : Zeitpolitische Perspektiven}, series = {ZPM - Zeitpolitisches Magazin}, volume = {19}, journal = {ZPM - Zeitpolitisches Magazin}, number = {40}, publisher = {DGfZP (Deutsche Gesellschaft f{\"u}r Zeitpolitik)}, issn = {2196-0356}, pages = {24 -- 26}, abstract = {In diesem Beitrag sollen in der gebotenen K{\"u}rze zeitpolitische Perspektiven auf die Bedeutung von Zeit und Nachhaltigkeit im Kontext der Sozialen Arbeit reflektiert werden. Daf{\"u}r werden die Begriffsfelder um Nachhaltigkeit und Zeit diskutiert und zeitpolitische Implikationen formuliert.}, language = {de} } @article{WalterSchwanzerSteineretal., author = {Walter, Stefanie and Schwanzer, Peter and Steiner, Carsten and Hagen, Gunter and Rabl, Hans-Peter and Dietrich, Markus and Moos, Ralf}, title = {Mixing Rules for an Exact Determination of the Dielectric Properties of Engine Soot Using the Microwave Cavity Perturbation Method and Its Application in Gasoline Particulate Filters}, series = {Sensors}, volume = {22}, journal = {Sensors}, number = {9}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/s22093311}, pages = {1 -- 17}, abstract = {In recent years, particulate filters have become mandatory in almost all gasoline-powered vehicles to comply with emission standards regarding particulate number. In contrast to diesel applications, monitoring gasoline particulate filters (GPFs) by differential pressure sensors is challenging due to lower soot masses to be deposited in the GPFs. A different approach to determine the soot loading of GPFs is a radio frequency-based sensor (RF sensor). To facilitate sensor development, in previous work, a simulation model was created to determine the RF signal at arbitrary engine operating points. To ensure accuracy, the exact dielectric properties of the soot need to be known. This work has shown how small samples of soot-loaded filter are sufficient to determine the dielectric properties of soot itself using the microwave cavity perturbation method. For this purpose, mixing rules were determined through simulation and measurement, allowing the air and substrate fraction of the sample to be considered. Due to the different geometry of filter substrates compared to crushed soot samples, a different mixing rule had to be derived to calculate the effective filter properties required for the simulation model. The accuracy of the determined mixing rules and the underlying simulation model could be verified by comparative measurements on an engine test bench.}, language = {en} } @article{ThemaSternerLencketal., author = {Thema, Martin and Sterner, Michael and Lenck, Thorsten and G{\"o}tz, Philipp}, title = {Necessity and Impact of Power-to-gas on Energy Transition in Germany}, series = {Energy Procedia}, volume = {99}, journal = {Energy Procedia}, publisher = {Elsevier}, doi = {10.1016/j.egypro.2016.10.129}, pages = {392 -- 400}, abstract = {The present paper gives an outlook on a bandwidth of required installed power-to-gas capacity in the German power sector fed by 100\% renewable generation until 2050. Two scenarios were simulated to quantify cost effects of power-to-gas on the electricity system: once with, once without additional short-term flexibility options to a system using fossil natural gas as sole flexibility option instead. As a result, at latest in 2035, power-to-gas capacity expansion has to take place to reach required installed capacities of up to 89-134 GW in 2050. Application of power-to-gas as long-term flexibility leads to cost savings of up to 11,7-19 bn Euro enabling a fully renewable system in 2050.}, language = {en} } @article{ThemaWeidlichHoerletal., author = {Thema, Martin and Weidlich, Tobias and H{\"o}rl, Manuel and Bellack, Annett and M{\"o}rs, Friedemann and Hackl, Florian and Kohlmayer, Matthias and Gleich, Jasmin and Stabenau, Carsten and Trabold, Thomas and Neubert, Michael and Ortloff, Felix and Brotsack, Raimund and Schmack, Doris and Huber, Harald and Hafenbradl, Doris and Karl, J{\"u}rgen and Sterner, Michael}, title = {Biological CO2-Methanation: An Approach to Standardization}, series = {Energies}, volume = {12}, journal = {Energies}, number = {9}, publisher = {MDPI}, doi = {10.3390/en12091670}, pages = {1 -- 32}, abstract = {Power-to-Methane as one part of Power-to-Gas has been recognized globally as one of the key elements for the transition towards a sustainable energy system. While plants that produce methane catalytically have been in operation for a long time, biological methanation has just reached industrial pilot scale and near-term commercial application. The growing importance of the biological method is reflected by an increasing number of scientific articles describing novel approaches to improve this technology. However, these studies are difficult to compare because they lack a coherent nomenclature. In this article, we present a comprehensive set of parameters allowing the characterization and comparison of various biological methanation processes. To identify relevant parameters needed for a proper description of this technology, we summarized existing literature and defined system boundaries for Power-to-Methane process steps. On this basis, we derive system parameters providing information on the methanation system, its performance, the biology and cost aspects. As a result, three different standards are provided as a blueprint matrix for use in academia and industry applicable to both, biological and catalytic methanation. Hence, this review attempts to set the standards for a comprehensive description of biological and chemical methanation processes.}, language = {en} } @inproceedings{VitzthumClausHerrmann, author = {Vitzthum, Thorsten and Claus, Thorsten and Herrmann, Frank}, title = {Can Aggregate Production Planning (APP) be modified to be as good as Master Production Scheduling (MPS)}, series = {ACC Journal}, volume = {23}, booktitle = {ACC Journal}, number = {2}, doi = {10.15240/tul/004/2017-2-012}, pages = {155 -- 162}, abstract = {In diesem Beitrag wird anhand einer Fallstudie die Bedeutung der Hauptproduktionsprogrammplanung (HPPLAN) f{\"u}r die hierarchische Produktionsplanung herausgearbeitet werden. Dazu wird versucht das Ergebnis der aggregierten Gesamtplanung (AGGRPLAN) durch Ver{\"a}nderung einzelner Paramater so zu verbessern, dass es dem Ergebnis der HPPLAN entspricht. Im Rahmen der Untersuchungen konnten dabei Verbesserungen f{\"u}r einzelne Planungssituationen erzielt werden, eine generelle L{\"o}sung konnte jedoch nicht gefunden werden. Insbesondere der Einsatz eines geeigneten Kapazit{\"a}tsreduktionsfaktors in Verbindung mit der Ber{\"u}cksichtigung der Durchlaufzeit f{\"u}hrt zu einer Verbesserung der L{\"o}sung. Bei der Planung von mehr als einem Produkt ist allerdings schwierig einen geeigneten Kapazit{\"a}tsreduktionsfaktor zu finden, da dieser abh{\"a}ngig von der Nachfrage ist.}, subject = {Hierarchische Produktionsplanung}, language = {en} } @inproceedings{TrostTeichClausetal., author = {Trost, Marco and Teich, Enrico and Claus, Thorsten and Herrmann, Frank}, title = {Master Production Scheduling and the relevance of included social criteria}, series = {ACC Journal}, volume = {23}, booktitle = {ACC Journal}, number = {3}, doi = {10.15240/tul/004/2017-2-011}, pages = {146 -- 154}, abstract = {Folgender Beitrag untersucht die Notwendigkeit einer Ber{\"u}cksichtigung von Mitarbeiterauslastungen und davon abh{\"a}ngiger Bearbeitungszeiten in der Hauptproduktionsprogrammplanung. Zudem wird aufgezeigt, dass dieses Themengebiet aktuell eine Forschungsl{\"u}cke darstellt. Aus diesem Grund wird ein selbst entwickeltes lineares Optimierungsmodell f{\"u}r die Hauptproduktionsprogrammplanung vorgestellt, welches soziale Kriterien und eine geeignete Fallstudie enth{\"a}lt. Die Ergebnisse verdeutlichen, dass erhebliche Abweichungen durch eine Ignoranz von Mitarbeiterauslastungen und davon abh{\"a}ngiger Bearbeitungszeiten entstehen. Deshalb ist eine Integration zu empfehlen. Allerdings wird auch deutlich, dass weitere Forschungen notwendig sind, speziell f{\"u}r die Bestimmung geeigneter Ersch{\"o}pfungsfunktionen, so wie beispielsweise Funktionen f{\"u}r Lerneffekte existieren.}, subject = {Fertigungsprogrammplanung}, language = {en} } @article{Herrmann, author = {Herrmann, Frank}, title = {Scheduling a flow shop with simultaneously loaded stations: A real world application}, series = {Journal of Control Science and Engineering}, volume = {3}, journal = {Journal of Control Science and Engineering}, doi = {10.17265/2328-2231/2015.03.004}, pages = {147 -- 163}, abstract = {Companies use special designed flow shops, in order to satisfy specific demands. Products need to be transported (from one station to the next station) by a crane and the way of working of this crane excludes the intermediate storage (of a work piece). In addition, the way of working restricts the set of feasible schedules even more than the no-buffer restriction discussed in the literature in the case of limited storage. Since this scheduling problem is integrated in the usual hierarchical planning, the tardiness is minimised. A linear optimisation model is presented to provide a formal description of this NP-hard problem. It is also used to explain the performance of priority rule based heuristic solutions on small test problems. In detail, priority rules as well as a priority rule based branch and bound procedure are analysed; priority rules are regarded, because a priority rule is still the standard procedure for on-line scheduling in industrial practise. Out of successful priority rules in the literature the best one is identified by an extensive simulative investigation. An improved look-ahead is realised by a restricted search over all possible schedules.}, subject = {Fließfertigung}, language = {en} } @inproceedings{SchmailzlHierlSchmidt, author = {Schmailzl, Anton and Hierl, Stefan and Schmidt, Michael}, title = {Gap-Bridging during Quasi-Simultaneous Laser Transmission Welding}, series = {Physics Procedia}, volume = {83}, booktitle = {Physics Procedia}, editor = {Schmidt, Michael}, publisher = {Elsevier}, address = {Amsterdam [u.a.]}, issn = {1875-3892}, doi = {10.1016/j.phpro.2016.08.113}, pages = {1073 -- 1082}, abstract = {Tightness is often the main requirement for quasi-simultaneous laser transmission welds. However, remaining gaps cannot be detected by the used set-path monitoring. By using a pyrometer in combination with a 3D-scanner, weld seam interruptions can be localized precisely while welding, due to temperature deviations along the weld contour. To analyze the temperature signal in correlation to the progress of gap-bridging, T-joint samples with predefined gaps are welded. The set-path is measured synchronously. Additionally, the temperature distribution and the influence of the thermal expansion of the polymers are studied by a thermo-mechanical FEM-process simulation. On top of that, the melt blow-out of the welded samples is analyzed using μCT-measurements. The experiments have shown that closing of a gap can be identified reliably by the temperature signal and that the squeezed melt flow into the gap and the thermal expansion in the gap zone accelerates gap-bridging. Furthermore the inserted heat can be adapted in the fault zone, in order to avoid thermal damage.}, language = {en} } @inproceedings{SchmailzlQuandtSchmidtetal., author = {Schmailzl, Anton and Quandt, Benjamin and Schmidt, Michael and Hierl, Stefan}, title = {In-Situ Process Monitoring during Laser Transmission Welding of PA6-GF30}, series = {Procedia CIRP}, volume = {74}, booktitle = {Procedia CIRP}, doi = {10.1016/j.procir.2018.08.131}, pages = {524 -- 527}, abstract = {Quasi-simultaneous laser transmission welding is preferably used for packaging sensors and electronics. In order to protect the components from moisture, a hermetic encapsulation is needed. However, local weld seam interruptions cannot be identified with the commonly used set-path monitoring. By using a pyrometer, coaxially integrated into a 3D-scanner, gaps between the joining partners can be allocated on basis of the measured temperature. However, the scattering of the heat radiation, especially caused by the fiber reinforcement of the plastics, leads to a reduction of the accessible heat radiation, which makes the identification of gaps considerably more difficult. The herein used experimental setup is characterized by a small detection spot and only by a slight weakening of the heat radiation inside the scanner. Hence, for welding PA6-GF30, the detection of small sized gaps is possible, even if a glass fiber content of 30 percent (wt.) and a weld seam width with approximately 1 mm are given.}, language = {en} } @incollection{MeusslingSentpali, author = {Meussling-Sentpali, Annette}, title = {Berufsbegleitend Pflegemanagement studieren: Aus der Pflegepraxis ins Management}, series = {Akademische Weiterbildung f{\"u}r soziale Berufe}, booktitle = {Akademische Weiterbildung f{\"u}r soziale Berufe}, editor = {Sch{\"o}pf, Nicolas}, publisher = {wbv}, address = {Bielefeld}, isbn = {9783763966479}, pages = {193 -- 207}, abstract = {In diesem Beitrag werden am Beispiel des berufsbegleitenden Bachelorstudiengangs Pflegemanagement der OTH Regensburg die Charakteristika dieses Studiums sowie die Merkmale der Studierenden und die daraus resultierenden methodischen, didaktischen und organisatorischen Spezifika dargestellt. Um Hintergrund und Relevanz aufzuzeigen, soll zun{\"a}chst ein Blick auf die Akademisierung der Pflege geworfen und eine Standortbestimmung von Pflegemanagementstudieng{\"a}ngen innerhalb der verschiedenen inzwischen etablierten Pflegestudieng{\"a}nge vorgenommen werden. Im zweiten Kapitel wird der Studiengang der OTH Regensburg vorgestellt und im dritten Kapitel werden die Erfahrungen, Herausforderungen und L{\"o}sungsstrategien beschrieben, die aus dem berufsbegleitenden Format mit „nicht-traditionell" Studierenden resultieren. Abschließend finden sich eine kurze Zusammenfassung und ein Ausblick.}, language = {de} } @incollection{EttlMohr, author = {Ettl, Katrin and Mohr, Christa}, title = {»Mein Selbstvertrauen ist wieder ein bisschen mehr geworden« - Bewertung der h{\"a}uslichen Telenursinginterventionen durch Schlaganfallbetroffene und pflegende Angeh{\"o}rige}, series = {Digitale Technik f{\"u}r ambulante Pflege und Therapie III: Nutzung Akzeptanz Wirkung und Lebensqualit{\"a}t}, booktitle = {Digitale Technik f{\"u}r ambulante Pflege und Therapie III: Nutzung Akzeptanz Wirkung und Lebensqualit{\"a}t}, editor = {Weber, Karsten and Haug, Sonja and Lauer, Norina and Mohr, Christa}, publisher = {transcript}, address = {Bielefeld}, isbn = {978-3-8376-6728-8}, doi = {10.14361/9783839467282-006}, pages = {89 -- 124}, language = {de} } @incollection{AltenbuchnerHaugKretschmeretal., author = {Altenbuchner, Amelie and Haug, Sonja and Kretschmer, Rainer and Weber, Karsten}, title = {How to Measure Physical Motion and the Impact of Individualized Feedback in the Field of Rehabilitation of Geriatric Trauma Patients}, series = {Health Informatics Meets eHealth}, booktitle = {Health Informatics Meets eHealth}, doi = {10.3233/978-1-61499-858-7-226}, pages = {226 -- 232}, abstract = {Background: This preparatory study accelerates an implementation of individualized monitoring and feedback of physical motion using conventional motion trackers in the rehabilitation process of geriatric trauma patients. Regaining mobility is accompanied with improved quality of life in persons of very advanced age recovering from fragility fractures. Objectives: Quantitative survey of regaining physical mobility provides recommendations for action on how to use motion trackers effectively in a clinical geriatric setting. Methods: Method mix of quantitative and qualitative interdisciplinary and mutual complementary research approaches (sociology, health research, philosophy/ethics, medical informatics, nursing science, gerontology and physical therapy). While validating motion tracker use in geriatric traumatology preliminary data are used to develop a target group oriented motion feedback. In addition measurement accuracy of a questionnaire about quality of life of multimorbid geriatric patients (FLQM) is tested. Conclusion: Implementing a new technology in a complex clinical setting needs to be based on a strong theoretical background but will not succeed without careful field testing.}, language = {en} }