@article{MuellerRueckJobstetal., author = {M{\"u}ller, Max and R{\"u}ck, Thomas and Jobst, Simon and Pangerl, Jonas and Weigl, Stefan and Bierl, Rudolf and Matysik, Frank-Michael}, title = {An Algorithmic Approach to Compute the Effect of Non-Radiative Relaxation Processes in Photoacoustic Spectroscopy}, series = {Photoacoustics}, volume = {26}, journal = {Photoacoustics}, publisher = {Elsevier}, doi = {10.1016/j.pacs.2022.100371}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-39935}, abstract = {Successful transfer of photoacoustic gas sensors from laboratory to real-life applications requires knowledge about potential cross-sensitivities towards environmental and gas matrix changes. Multi-dimensional calibration in case of cross-sensitivities can become very complex or even unfeasible. To address this challenge, we present a novel algorithm to compute the collision based non-radiative efficiency and phase lag of energy relaxation on a molecular level (CoNRad) for photoacoustic signal calculation. This algorithmic approach allows to calculate the entire elaxation cascade of arbitrarily complex systems, yielding a theoretical photoacoustic signal. In this work the influence of varying bulk compositions, i.e. nitrogen (N2), oxygen (O2) and water (H2O) on the photoacoustic signal during methane (CH4) detection is demonstrated. The applicability of the algorithm to other photoacoustic setups is shown exemplary by applying it to the relaxational system investigated in [1]. Hayden et al. examined the effect of water on photoacoustic carbon monoxide (CO) detection.}, language = {en} } @article{SommoggyGrepmeierCurbach, author = {Sommoggy, Julia von and Grepmeier, Eva-Maria and Curbach, Janina}, title = {Health Literacy-Sensitive Counselling on Early Childhood Allergy Prevention}, series = {International Journal of Environmental Research and Public Health}, volume = {19}, journal = {International Journal of Environmental Research and Public Health}, number = {7}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/ijerph19074182}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:355-epub-520757}, pages = {1 -- 16}, abstract = {In Germany, midwives are involved in extensive antenatal and postnatal care. As health professionals, they can play a key role in strengthening health literacy (HL) of parents on how to prevent chronic allergic diseases in their children. The objective of this study is to explore midwives' perspectives regarding HL-sensitive counselling in early childhood allergy prevention (ECAP). Twenty-four qualitative semi-structured interviews were conducted with midwives, and data were analyzed using qualitative content analysis. Only a small number of study participants were aware of HL as a concept. However, most of these use screening and counselling strategies which consider individual information needs and which support parental HL. HL sensitivity in counselling is largely based on the midwives' "gut feelings" and counselling experience, rather than on formal education. The midwives were largely aware of evidence-based ECAP recommendations; however, allergy prevention was not seen as a stand-alone topic but as part of their general counselling on infant feeding and hygiene. They found parents to be more open to receiving complex prevention information during antenatal counselling. In order to strengthen midwives' roles in HL-sensitive ECAP counselling, their formal education should provide them with explicit HL knowledge and counselling skills. ECAP should be an inherent part of antenatal care.}, language = {en} } @article{GradNadammalTytkoetal., author = {Grad, Marius and Nadammal, Naresh and Tytko, Darius and Noster, Ulf}, title = {On the nanoindentation behavior of a TiC layer formed through thermo-reactive diffusion during hot pressing of Ti and cast iron}, series = {Materials Letters: X}, volume = {15}, journal = {Materials Letters: X}, number = {September}, publisher = {Elsevier}, address = {Amsterdam, Niederlande}, issn = {2590-1508}, doi = {10.1016/j.mlblux.2022.100161}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-50066}, pages = {1 -- 4}, abstract = {Hot pressing of pure Ti and cast iron under vacuum formed a ~15 μm wide TiC-layer through the thermoreactive diffusion process. Nanoindentation testing of the TiC-layer revealed average hardness and elastic modulus values of ~35 GPa and ~400 GPa, respectively. High-resolution indentation mapping indicated hardness change across the boundary with peak values observed within the TiC-layer. Solid state high temperature diffusion holds significant potential for developing uniform hard coatings on pure Ti/Ti-alloys.}, language = {en} } @article{ZacherlWopperSchwanzeretal., author = {Zacherl, Florian and Wopper, Christoph and Schwanzer, Peter and Rabl, Hans-Peter}, title = {Potential of the Synthetic Fuel Oxymethylene Ether (OME) for the Usage in a Single-Cylinder Non-Road Diesel Engine: Thermodynamics and Emissions}, series = {Energies}, volume = {15}, journal = {Energies}, number = {21}, publisher = {MDPI}, doi = {10.3390/en15217932}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-55350}, pages = {1 -- 26}, abstract = {Non-road sectors, such as agriculture and construction machinery, require high energy densities and flexibility in use, which is why diesel engines are mainly used. The use of climate-neutral fuels, produced from renewable energies, such as Oxymethylene Ether (OME) as a diesel substitute, can significantly reduce CO2 and pollutant emissions in these sectors. In addition to CO2 neutrality, OME also offers improved combustion characteristics compared to diesel fuel, eliminating the soot-NOx trade-off and thus enabling new opportunities in engine design and calibration. In this paper, the combustion of pure OME on a close-to-production, single-cylinder non-road diesel engine with a pump-line-nozzle injection system is analyzed. A variation of the center of combustion at constant power output was performed for diesel and OME at different operating points. Two injectors were investigated with OME. A study on ignition delay and a detailed thermodynamic analysis was carried out. In addition, the exhaust emissions CO, NOx, VOC, as well as particulate-matter, -number and -size distributions were measured. With OME, a significantly shorter ignition delay as well as a shortened combustion duration could be observed, despite a longer injection duration. In addition, the maximum injection pressure increases. VOC and CO emissions are reduced. Particulate matter was reduced by more than 99\% and particle number (>10 nm) was reduced by multiple orders of magnitude. The median of the particle size distribution shifts from 60 to 85 nm (diesel) into a diameter range of sub 23 nm (OME). A significant reduction of NOx emissions with OME enables new degrees of freedom in engine calibration and an efficiency advantage without hardware adaption.}, language = {en} } @misc{EgerBergstraesserDendorferetal., author = {Eger, Maximilian and Bergstraesser, Marcel and Dendorfer, Sebastian and Lenich, Andreas and Pfeifer, Christian}, title = {Influence of radial head prosthetic design on humeroradial stability: Validation of a test rig therefore}, series = {DOKU2022, Deutscher Kongress f{\"u}r Orthop{\"a}die und Unfallchirurgie, 25.-28. 10.2022, Berlin}, journal = {DOKU2022, Deutscher Kongress f{\"u}r Orthop{\"a}die und Unfallchirurgie, 25.-28. 10.2022, Berlin}, publisher = {German Medical Science GMS Publishing House}, address = {D{\"u}sseldorf}, doi = {10.3205/22dkou611}, url = {http://nbn-resolving.de/urn:nbn:de:0183-22dkou6115}, language = {en} } @article{HaugSchnellScharfetal., author = {Haug, Sonja and Schnell, Rainer and Scharf, Anna and Altenbuchner, Amelie and Weber, Karsten}, title = {Bereitschaft zur Impfung mit einem COVID-19-Vakzin - Risikoeinsch{\"a}tzung, Impferfahrungen und Einstellung zu Behandlungsverfahren}, series = {Pr{\"a}vention und Gesundheitsf{\"o}rderung}, volume = {17}, journal = {Pr{\"a}vention und Gesundheitsf{\"o}rderung}, number = {4}, publisher = {Springer Nature}, doi = {10.1007/s11553-021-00908-y}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-154}, pages = {537 -- 544}, abstract = {Hintergrund Impfungen stellen eine bedeutende Pr{\"a}ventionsmaßnahme dar. Grundlegend f{\"u}r die Eind{\"a}mmung der Coronapandemie mittels Durchimpfung der Gesellschaft ist eine ausgepr{\"a}gte Impfbereitschaft. Ziel der Arbeit Die Impfbereitschaft mit einem COVID‑19-Vakzin (Impfstoff gegen das Coronavirus) und deren Einflussfaktoren werden anhand einer Zufallsstichprobe der Gesamtbev{\"o}lkerung in Deutschland untersucht. Material und Methoden Die Studie basiert auf einer telefonischen Zufallsstichprobe und ber{\"u}cksichtigt {\"a}ltere und vorerkrankte Personen ihrem Bev{\"o}lkerungsanteil entsprechend. Die Ein-Themen-Bev{\"o}lkerungsbefragung zur Impfbereitschaft (n = 2014) wurde im November/Dezember 2020 durchgef{\"u}hrt. Ergebnisse Die Impfbereitschaft in der Stichprobe liegt bei rund 67 \%. Vorerfahrungen mit Impfungen moderieren die Impfbereitschaft. Sie steigt bei Zugeh{\"o}rigkeit zu einer Risikogruppe. Der Glaube an die Wirksamkeit alternativer Heilmethoden und Bef{\"u}rwortung alternativer Behandlungsverfahren geht mit geringerer Impfbereitschaft einher. {\"A}ltere Menschen sind impfbereiter, kovariierend mit ihrer Einsch{\"a}tzung h{\"o}herer Gef{\"a}hrdung bei Erkrankung. Ebenso ist die Ablehnung einer Impfung mit der {\"U}bersch{\"a}tzung von Nebenwirkungen assoziiert. Schlussfolgerung Die Impfbereitschaft h{\"a}ngt mit Impferfahrungen und Einstellungen zu Gesundheitsbehandlungsverfahren allgemein zusammen. Die {\"U}bersch{\"a}tzung der H{\"a}ufigkeit ernsthafter Nebenwirkungen bei Impfungen weist auf weit verbreitete Fehlinformationen hin.}, language = {de} } @article{ThielKratzerGrimmetal., author = {Thiel, Charlotte and Kratzer, Johanna and Grimm, Benedikt and Kr{\"a}nkel, Thomas and Gehlen, Christoph}, title = {Effect of Internal Moisture and Outer Relative Humidity on Concrete Carbonation}, series = {CivilEng}, volume = {4}, journal = {CivilEng}, number = {3}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/civileng3040058}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-56091}, pages = {1039 -- 1052}, abstract = {With steadily rising CO2 concentrations in the ambient air and fast-changing concretecompositions with reduced clinker contents, the availability of reliable and accelerated concrete car-bonation tests is of crucial importance to design durable structures. This paper focuses on the effectsof moisture under accelerated conditions and the effects of different CO2 exposure conditions. Mor-tar prisms incorporating three different cement types were cured and stored at either 50\% or 65\%relative humidity (RH). Afterwards, the prisms were carbonated at different ambient humidities(50, 57 and 65\%), different CO2 concentrations (0.04, 1 and 3 vol.\%) and complemented by a seriesof tests at increased gas pressure (2 barg). High-resolution test methods were used to explain theunderlying carbonation mechanisms. The results show that pre-conditioning for two weeks—ascurrently suggested by the European Standard—seems to be too short because the initial inner mois-ture content severely affects the carbonation rate. Relative humidity during carbonation of 57\% ledto higher carbonation rates compared to 50\% and 65\%. In addition, climate data needs to be period-ically (preferably permanently) recorded in research experiments and in laboratory testing to ensurefair interpretation of experimental results.}, language = {en} } @incollection{GreinerLauer, author = {Greiner, Nina and Lauer, Norina}, title = {Informierte Einwilligung bei Aphasie}, series = {Digitale Technik f{\"u}r ambulante Pflege und Therapie: Herausforderungen, L{\"o}sungen, Anwendungen und Forschungsperspektiven}, booktitle = {Digitale Technik f{\"u}r ambulante Pflege und Therapie: Herausforderungen, L{\"o}sungen, Anwendungen und Forschungsperspektiven}, editor = {Weber, Karsten and Haug, Sonja and Lauer, Norina and Meussling-Sentpali, Annette and Mohr, Christa and Pfingsten, Andrea and Raptis, Georgios and Bahr, Gudrun}, edition = {1. Aufl.}, publisher = {transcript}, address = {Bielefeld}, isbn = {978-3-8394-6235-5}, doi = {10.14361/9783839462355-007}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-55107}, publisher = {Ostbayerische Technische Hochschule Regensburg}, pages = {137 -- 154}, abstract = {Nach einer Einf{\"u}hrung in die Grundlagen der informierten Einwilligung werden Empfehlungen zur Durchf{\"u}hrung zusammengefasst und Besonderheiten im Hinblick auf die Gestaltung des Einwilligungsprozesses bei Personen mit Aphasie herausgearbeitet. Zuletzt wird das aphasiefreundliche Vorgehen im Projekt DeinHaus 4.0 Oberpfalz kurz skizziert.}, subject = {Informed consent}, language = {de} } @article{KraftKellner, author = {Kraft, Sarah Katharina and Kellner, Florian}, title = {Can Blockchain Be a Basis to Ensure Transparency in an Agricultural Supply Chain?}, series = {Sustainability}, volume = {14}, journal = {Sustainability}, number = {13}, publisher = {MDPI}, doi = {10.3390/su14138044}, abstract = {Many supply chains within developing countries lack transparency and are fraught with fraud, corruption, and a substantial number of intermediaries. For several decades, the cocoa sector has faced multiple social, economic, and environmental challenges, some of which include the issue of child labor and very low incomes for farmers, leading to poor living conditions. Blockchain technology has a high potential to reduce—or completely eradicate—some of these hurdles. In this article, we present a blockchain-based solution based on the open-source framework Hyperledger Fabric for the cocoa supply chain to promote transparency and reduce fraud. In doing so, we explicitly describe how farmers can be directly integrated into the whole blockchain solution considering the limited infrastructure, knowledge, and technologies available to them. Since about 70\% of all cocoa worldwide is produced in West Africa, this case study uses the cocoa sector in Ghana as an example.}, language = {en} } @article{EigenbergerFelthausSchratzenstalleretal., author = {Eigenberger, Andreas and Felthaus, Oliver and Schratzenstaller, Thomas and Haerteis, Silke and Utpatel, Kirsten and Prantl, Lukas}, title = {The Effects of Shear Force-Based Processing of Lipoaspirates on White Adipose Tissue and the Differentiation Potential of Adipose Derived Stem Cells}, series = {cells}, volume = {11}, journal = {cells}, number = {16}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/cells11162543}, pages = {13}, abstract = {Autologous lipotransfer is a promising method for tissue regeneration, because white adipose tissue contains a heterogeneous cell population, including mesenchymal stem cells, endothelial cells, immune cells, and adipocytes. In order to improve the outcome, adipose tissue can be processed before application. In this study, we investigated changes caused by mechanical processing. Lipoaspirates were processed using sedimentation, first-time centrifugation, shear-force homogenization, and second-time centrifugation. The average adipocyte size, stromal vascular cell count, and adipocyte depot size were examined histologically at every processing step. In addition, the adipose derived stem cells (ADSCs) were isolated and differentiated osteogenically and adipogenically. While homogenization causes a disruption of adipocyte depots, the shape of the remaining adipocytes is not changed. On average, these adipocytes are smaller than the depot adipocytes, they are surrounded by the ECM, and therefore mechanically more stable. The volume loss of adipocyte depots leads to a significant enrichment of stromal vascular cells such as ADSCs. However, the mechanical processing does not change the potential of the ADSCs to differentiate adipogenically or steogenically. It thus appears that mechanically processed lipoaspirates are promising for the reparation of even mechanically stressed tissue as that found in nasolabial folds. The changes resulting from the processing correspond more to a filtration of mechanically less stable components than to a manipulation of the tissue.}, language = {en} }