@incollection{MuehlbauerRablRottengruber, author = {M{\"u}hlbauer, Christian and Rabl, Hans-Peter and Rottengruber, Hermann}, title = {Acoustic Optimization of Mechatronic Direct Injection Systems and Analysis of the Effects on Robustness in System Operation}, series = {SAE International Journal of Advances and Current Practices in Mobility}, volume = {4}, booktitle = {SAE International Journal of Advances and Current Practices in Mobility}, number = {1}, publisher = {SAE International, Warrendale, PA, United States}, issn = {2641-9645}, doi = {10.4271/2021-01-0671}, pages = {68 -- 77}, abstract = {The tightening of the emission legislation and political and social demands for sustainable mobility are forcing the automotive industry to develop complex, high precision mechatronic drive systems. The increasing precision of mechatronic components generally leads to an increase in structural excitation and thus to a rise in noise. The so-called ticking of the fuel injection system has a rather low sound pressure level compared to the residual engine noise. Nevertheless, the impulsive and high frequency noise character leads to a decline concerning the perception of comfort and sound quality. In order to identify the sound quality of fuel injection systems as a frontloading measure, a system test bench has been developed which represents the structure-borne and airborne sound radiation of the stand-alone injection system in a close to series configuration. In this paper, measures for the acoustic optimization of injection systems and their effects on the robustness of the system are discussed. The focus is on engine idling, since at this operating point the ticking of the injectors and high-pressure pump can be perceived most clearly due to the low masking effects of other noise sources. For this purpose, the injection parameters were measured during full engine operation and transferred to the system test bench. By using a special development control unit, it was possible to modify the parameters, quantify their influence on the acoustic behavior and, based on this, define NVH optimized control strategies. For the robustness evaluation of the NVH optimized control strategies, key functions of the injection system were analyzed under varying boundary conditions in system operation on an injection rate test bench.}, language = {en} } @misc{AltmannGadererRabl, author = {Altmann, Robert and Gaderer, Matthias and Rabl, Hans-Peter}, title = {Pr{\"u}fstandsuntersuchungen an einem DEUTZ NRMM Motor mit Raps{\"o}lkraftstoff und Optimierung des Betriebs- und Emissionsverhaltens durch statistische Versuchsplanung}, series = {18. Internationaler Fachkongress "Kraftstoffe der Zukunft 2021" - digital \& international vernetzt!, online}, journal = {18. Internationaler Fachkongress "Kraftstoffe der Zukunft 2021" - digital \& international vernetzt!, online}, language = {de} } @inproceedings{AltmannGebhardTroegeretal., author = {Altmann, Robert and Gebhard, J{\"u}rgen and Troeger, Adrian and Winkler, Markus and T{\"o}pfer, Georg and Remmele, Edgar and Gaderer, Matthias and Rabl, Hans-Peter}, title = {Engine performance and emission analysis of a NRMM CI engine with common rail injection system operated with diesel fuel and rapeseed oil fuel}, series = {Proceedings of the 6th Commercial Vehicle Technology Symposium 2020/2021}, booktitle = {Proceedings of the 6th Commercial Vehicle Technology Symposium 2020/2021}, editor = {Berns, Karsten and Dressler, Klaus and Kalmar, Ralf and Stephan, Nicole and Teutsch, Roman and Thul, Martin}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3-658-29716-9}, doi = {10.1007/978-3-658-29717-6_16}, pages = {231 -- 242}, abstract = {The use of alternative fuels in high-power non-road mobile machinery (NRMM) combustion engines is a possible way to substitute fossil fuel. By using pure vegetable oil fuels, like rapeseed oil fuel (DIN 51605), the greenhouse gases can be reduced effectively. Due to the differences in physical and chemical properties, a modification of the engine control unit calibration is necessary to adapt the working process on the fuel. Without modifications, the engine power output with rapeseed oil fuel is lower than with diesel fuel because of the smaller energy content. By adapting the engine settings, like the injection fuel mass, the power loss can be compensated but it accompanies with a higher fuel consumption. The engine emissions at part load conditions show, that there are benefits in particle emissions by using rapeseed oil at similar NOx emissions. Therefore, a design of experiment setup was initiated on a selected engine operation point to determine the effects of further parameters, like rail pressure, manifold pressure and injection pattern, on the process and to see the potential of an optimized calibration.}, language = {en} } @inproceedings{MuehlbauerRablRottengruber, author = {M{\"u}hlbauer, Christian and Rabl, Hans-Peter and Rottengruber, Hermann}, title = {Akustische Optimierung von mechatronischen Direkteinspritzsystemen und Analyse der Auswirkungen auf die Robustheit im Systembetrieb}, series = {Motor- und Aggregate-Akustik: 11. Magdeburger Symposium, Tagungsband}, volume = {11}, booktitle = {Motor- und Aggregate-Akustik: 11. Magdeburger Symposium, Tagungsband}, publisher = {Otto-von-Guericke-Universit{\"a}t}, address = {Magdeburg}, doi = {10.25673/36611}, pages = {32 -- 51}, abstract = {The tightening of the emission legislation and political and social demands for sustainable mobility are forcing the automotive industry to develop complex, high precision mechatronic drive systems. The increasing precision of mechatronic components generally leads to an increase in structural excitation and thus to a rise in noise. The socalled ticking of the fuel injection system has a rather low sound pressure level compared to the residual engine noise. Nevertheless, the impulsive and high frequency noise character leads to a decline concerning the perception of comfort and sound quality. In order to identify the sound quality of fuel injection systems as a frontloading measure, a system test bench has been developed which represents the structureborne and airborne sound radiation of the stand-alone injection system in a close to series configuration. In this paper, measures for the acoustic optimization of injection systems and their effects on the robustness of the system are discussed. The focus is on engine idling, since at this operating point the ticking of the injectors and the high-pressure pump can be perceived most clearly due to the low masking effects of other noise sources. For this purpose, the injection parameters were measured during full engine operation and transferred to the system test bench. By using a special development control unit, it was possible to modify the parameters, quantify their influence on the acoustic behavior and, based on this, define NVH optimized control strategies. For the robustness evaluation of the NVH optimized control strategies, key functions of the injection system were analyzed under varying boundary conditions in system operation on an injection rate test bench.}, language = {de} } @inproceedings{SchneiderMuehlbauerSittletal., author = {Schneider, Sebastian and M{\"u}hlbauer, Christian and Sittl, Christopher and Rottengruber, Hermann and Rabl, Hans-Peter and Wagner, Marcus and Verhey, Jesko L.}, title = {Tickerger{\"a}uschanalyse an einem Otto-DI-Motor mittels empirischer Bewertungsformel}, series = {Motor- und Aggregate-Akustik: 11. Magdeburger Symposium, Tagungsband}, booktitle = {Motor- und Aggregate-Akustik: 11. Magdeburger Symposium, Tagungsband}, editor = {Rottengruber, Hermann and Luft, Tommy and Schneider, Sebastian}, publisher = {Otto-von-Guericke-Universit{\"a}t}, address = {Magdeburg}, isbn = {978-3-948749-02-6}, doi = {10.25673/36611}, pages = {65 -- 86}, abstract = {Beim Kauf eines Pkw wird der akustische Qualit{\"a}tseindruck eines Fahrzeugantriebstrangs stetig relevanter. Die wahrgenommene Ger{\"a}uschqualit{\"a}t des Motoraggregates nimmt hierbei eine Schl{\"u}sselrolle ein. Aufgrund der Auspr{\"a}gung einzelner St{\"o}rger{\"a}usche wird jene Ger{\"a}uschqualit{\"a}t negativ beeinflusst. Diese als unangenehm empfundenen Ger{\"a}uschkomponenten gilt es im Rahmen der Fahrzeugentwicklung weiter zu reduzieren, wobei die Identifikation und Bewertung st{\"o}render Ger{\"a}uschanteile am Motorgesamtger{\"a}usch Voraussetzungen f{\"u}r eine effektive Akustikoptimierung sind. Vor allem das impulshafte Tickerger{\"a}usch wird bei Otto-DI-Motoren als besonders l{\"a}stig eingestuft, weswegen dieser Beitrag darauf abzielt, die tickernden Ger{\"a}uschanteile aus dem Gesamtger{\"a}usch zu analysieren und zu bewerten. Hierzu wurde eine empirische Formel entwickelt, welche die tickernden Ger{\"a}uschanteile in ihrer Intensit{\"a}t in Grenzen einstufen kann. Diese ist rein empfindungsbasiert und besteht aus der Impulshaftigkeit, der Lautheit sowie der Sch{\"a}rfe des Motorgesamtger{\"a}usches. Wie auch bei anderen psychoakustischen Bewertungsskalen wurde die Benotung von 1 (sehr tickernd) bis 10 (nicht tickernd) vorgenommen. Anhand von H{\"o}rversuchen mithilfe einer Expertenjury konnte die Tickerger{\"a}uschbewertungsformel anschließend verifiziert werden. Hiernach kann pr{\"a}zise ausgesagt werden, in welchen Motorkennfeldbereichen das Tickerger{\"a}usch die Angenehmheit des Motorgesamtger{\"a}usches untergr{\"a}bt.}, language = {de} } @article{SchwanzerSchillingerMieslingeretal., author = {Schwanzer, Peter and Schillinger, Maximilian and Mieslinger, Johann and Walter, Stefanie and Hagen, Gunter and Maerkl, Susanne and Haft, Gerhard and Dietrich, Markus and Moos, Ralf and Gaderer, Matthias and Rabl, Hans-Peter}, title = {A Synthetic Ash-Loading Method for Gasoline Particulate Filters with Active Oil Injection}, series = {SAR International Journal of Engines}, volume = {14}, journal = {SAR International Journal of Engines}, number = {4}, publisher = {SAE International}, issn = {1946-3936}, doi = {10.4271/03-14-04-0029}, pages = {493 -- 506}, abstract = {To reduce particulate emissions, the use of particulate filters in diesel engines is meanwhile state of the art, while the integration of such systems in gasoline engines is now also necessary in order to comply with today's regulations. Over its lifetime, a gasoline particulate filter (GPF) collects ash components of fuel, lubrication oil, and materials originating from the catalytic coating and from engine abrasion. In the development and application process, synthetic ashing from GPFs is challenging. The ash of the lubrication oil can be increased in various ways, like oil-doped fuel, a separate oil burner, or changes in the piston-cylinder system of the engine. However, these methods show major disadvantages. For this reason, an improved approach is presented in this study, which allows a quick response to changes in combustion (e.g., engine knocking) and producing ash, which is more realistic due to its primary particle size and the density of ash plugs, in a shorter time. Therefore, an approach to accelerate ash loading by active oil injection using a multi-point injection (MPI) system is introduced. With the help of this methodology, an ashing capacity of 1.21 g/h is implemented, which is a high rate compared to other investigations. The primary particle size (evaluated by means of a transmission electron microscope), is in the same size range as those detected at the full-load curve during regular operation. A computer tomographic (CT) analysis of the incinerated particulate filter also shows that a very high density of ash plugs can be realized, which has also been found in the literature for real applications. In addition, with the help of a mass spectrometer (MS) and an intermediate weighing of the particulate filter, the current ash loading of the GPF could be determined with an accuracy of 1\%.}, language = {en} } @inproceedings{RiegerOetjenvandeParetal., author = {Rieger, Anna and Oetjen, Arne and van de Par, Steven and Rabl, Hans-Peter}, title = {Geh{\"o}rbezogene Modellierung der Dissonanz}, series = {Tagungsband DAGA 2021: 47. Jahrestagung f{\"u}r Akustik, 15.-18. August 2021, Wien und Online}, volume = {47}, booktitle = {Tagungsband DAGA 2021: 47. Jahrestagung f{\"u}r Akustik, 15.-18. August 2021, Wien und Online}, publisher = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, pages = {1034 -- 1037}, language = {de} }