@inproceedings{MaiwaldEnglmaierHierl, author = {Maiwald, Frederik and Englmaier, Stephan and Hierl, Stefan}, title = {Online pyrometry for weld seam localization in absorber-free laser transmission welding of transparent polymers}, series = {21st International Symposium on Laser Precision Microfabrication: Dresden, 26.06.2020}, booktitle = {21st International Symposium on Laser Precision Microfabrication: Dresden, 26.06.2020}, publisher = {Japan Laser Processing Society}, abstract = {Optical and medical devices made of transparent polymers are gaining popularity because of its cost advantages. The manufacturing technology must be able to meet the high demands of these applications. Advantages of laser transmission welding - contactless input of energy, precision, no adhesives and no particle formation - can be exploited here. For absorber-free welding, lasers emitting in the polymers' intrinsic absorption spectrum are used. Focusing the laser beam with high NA enables selective fusing of the joining zone. Since a molten upper surface leads to visible and palpable irregularities, the lateral expansion of the weld seam is monitored in this work. Welding tests with 1 mm thick plates of COC are performed and monitored by pyrometry. Distances between seam and surface measured in thin cuts and are compared with the pyrometer signal. This shows that the localization of the weld seam is possible and proper and faulty parts can be distinguished by pyrometry.}, subject = {Laserdurchstrahlschweissen}, language = {en} } @article{MaiwaldHierl, author = {Maiwald, Frederik and Hierl, Stefan}, title = {Pyrometerbasierte Prozess{\"u}berwachung beim Laserkunststoffschweißen}, series = {Photonik}, journal = {Photonik}, number = {52}, publisher = {AT-Fachverl.}, address = {Fellbach}, pages = {22 -- 25}, subject = {Laserschweissen}, language = {de} } @inproceedings{KaesbauerSchmailzlPrehmetal., author = {K{\"a}sbauer, Johannes and Schmailzl, Anton and Prehm, Jens and Loose, Tobias and Hierl, Stefan}, title = {Simulation of Quasi-Simultaneous Laser Transmission Welding of Plastics}, series = {Procedia CIRP}, volume = {94}, booktitle = {Procedia CIRP}, publisher = {Elsevier}, doi = {10.1016/j.procir.2020.09.136}, pages = {737 -- 741}, abstract = {Thermo-mechanical simulation offers great opportunities to optimize welding processes of plastics. For realistic simulation, the temperature dependent mechanical properties need to be implemented from ambient temperature to temperatures above the flow temperature. Standard test methods are insufficient for characterization in the entire temperature range because close to the flow temperature the material is too soft for tensile tests and too stiff for rheometry. Therefore, an optimization strategy is developed, that determines unknown material parameters by testing in welding simulations. The unknown parameters are iteratively adjusted to minimize the mismatch between computed and measured set-paths. Thus, important process characteristics are calculated realistically, enabling the computer aided assessment of the weld quality.}, subject = {Kunststoffschweißen}, language = {en} } @inproceedings{MaiwaldEnglmaierHierl, author = {Maiwald, Frederik and Englmaier, Stephan and Hierl, Stefan}, title = {Absorber-free Laser Transmission Welding of Transparent Polymers using Fixed Focus Optics and 3D Laser Scanner}, series = {Procedia CIRP}, volume = {94}, booktitle = {Procedia CIRP}, publisher = {Elsevier}, doi = {10.1016/j.procir.2020.09.117}, pages = {686 -- 690}, abstract = {Laser transmission welding is a well-known joining technology for thermoplastics, providing reliable and hermetical sealing without adhesives or particle formation. The main advantages of laser-based energy input - high precision, no additional adhesive and no particle emission - are essential for medical and optical applications. To obtain sufficient absorption in visually transparent polymers, thulium fibre lasers emitting in the polymers' intrinsic absorption spectrum are used. Optics with high numerical aperture provide large intensity gradients inside the specimen, enabling selective fusing in the joining zone. Although the basic feasibility has already been demonstrated, the welding process lacks stability and productivity. Aim of this work is the determination of optimized settings for a fast and reliable welding process. Thus, the interplay of process parameters as well as their impact on the seam are analysed by thermal simulations. Calculated settings are verified by welding tests with COC, PA6 and PETG, using a fixed-focus optics and a 3D laser scanner with up to 200 mm/s feed rate.}, language = {en} } @article{SchmailzlKaesbauerMartanetal., author = {Schmailzl, Anton and K{\"a}sbauer, Johannes and Martan, Jiř{\´i} and Honnerov{\´a}, Petra and Sch{\"a}fer, Felix and Fichtl, Maximilian and Lehrer, Tobias and Pruš{\´a}kov{\´a}, L. and Tesař, Jiř{\´i} and Sk{\´a}la, J. and Honner, Milan and Hierl, Stefan}, title = {Measurement of Core Temperature through Semi-Transparent Polyamide 6 using Scanner-Integrated Pyrometer in Laser Welding}, series = {International Journal of Heat and Mass Transfer}, volume = {146}, journal = {International Journal of Heat and Mass Transfer}, number = {January}, publisher = {Elsevier}, doi = {10.1016/j.ijheatmasstransfer.2019.118814}, abstract = {Predicting the core temperature during welding is an ambitious aim in many research works. In this work, a 3D-scanner with integrated pyrometer is characterized and used to measure the temperature during quasi-simultaneous laser transmission welding of polyamide 6. However, due to welding in an overlap configuration, the heat radiation emitted from the joining zone of a laser transmission weld has to pass through the upper polymer, which is itself a semi-transparent emitter. Therefore, the spectral filtering of the heat radiation in the upper polymer is taken into account by calibrating the pyrometer for the measurement task. Thermal process simulations are performed to compare the temperature field with the measured temperature signal. The absorption coefficients of the polymers are measured, in order to get precise results from the computation. The temperature signals during welding are in good agreement with the computed mean temperature inside the detection spot, located in the joining area. This is also true for varying laser power, laser beam diameter and the carbon black content in the lower polymer. Both, the computed mean temperature and the temperature signal are representing the core temperature. In order to evaluate the spatial sensitivity of the measurement system, the emitted heat radiation from both polymers is calculated on basis of the computed temperature field. Hereby it is found, that more than 90 percent of the detected heat radiation comes from the joining area, which is a crucial information for contact-free temperature measurement tasks on semi-transparent polymers.}, language = {en} } @inproceedings{SchmailzlQuandtHierletal., author = {Schmailzl, Anton and Quandt, Benjamin and Hierl, Stefan and Schmidt, Michael}, title = {Correlation between Joint Strength and Process Temperature in Quasi-Simultaneous Laser Transmission Welding of Polyamide 6}, series = {Proceedings of LiM2019 - Lasers in Manufacturing (23 June 2019, Munich)}, booktitle = {Proceedings of LiM2019 - Lasers in Manufacturing (23 June 2019, Munich)}, publisher = {Wissenschaftliche Gesellschaft Lasertechnik e.V.}, pages = {1 -- 10}, abstract = {The joint strength is gaining importance in quasi -simultaneous laser transmission welds, especially in structural components. A correlation between the joint strength and a process characteristic is a basic requirement for selecting the best process parameter setting. In this work, the temperature is measured during welding polyamide 6 by using a scanner-integrated pyrometer with an InGaAs-detector. The filtering of the heat radiation in the upper joining partner is taken into account by calibrating the mea surement system. By this, the measured temperature signal represents the temperature in the joining zone. A correlation is found between the measured temperature and the resulting joint strength. Moreover, high joint strengths are also seen for welds with short welding times, as far as the temperature is sufficiently high. With this knowledge, a process window can be derived easily in order to produce welds with high strength and short welding times.}, language = {en} } @article{KaesbauerSchmailzlWeberetal., author = {K{\"a}sbauer, Johannes and Schmailzl, Anton and Weber, Ulrich and Hierl, Stefan and Jaus, Tobias and Schwalme, Michael}, title = {Simulationsgest{\"u}tzte Evaluierung von Strahloszillationsmustern beim quasi-simultanen Laser-Durchstrahlschweißen}, series = {JOINING PLASTICS - F{\"u}gen von Kunststoffen}, volume = {13}, journal = {JOINING PLASTICS - F{\"u}gen von Kunststoffen}, number = {2}, publisher = {DVS-Verl., Verl. f{\"u}r Schweißen und Verwandte Verfahren}, address = {D{\"u}sseldorf}, pages = {102 -- 109}, language = {de} } @inproceedings{QuandtSchroeckerHierl, author = {Quandt, Benjamin and Schr{\"o}cker, Korbinian and Hierl, Stefan}, title = {Prozess{\"u}berwachung beim quasi-simultanen Laser-Durchstrahlschweißen glasfaserverst{\"a}rkter Thermoplaste}, series = {9. Landshuter Leichtbau-Colloquium: Leichtbau in Forschung und industrieller Anwendung von der Nano- bis zur Makroebene, 27. / 28. Februar 2019 Hochschule Landshut, Tagungsband zum Colloquium}, booktitle = {9. Landshuter Leichtbau-Colloquium: Leichtbau in Forschung und industrieller Anwendung von der Nano- bis zur Makroebene, 27. / 28. Februar 2019 Hochschule Landshut, Tagungsband zum Colloquium}, editor = {Huber, Otto and Bicker, Marc and Patzelt, Peter}, publisher = {LC-Verlag}, address = {Landshut}, pages = {56 -- 64}, language = {de} } @misc{KaesbauerSchmailzlLooseetal., author = {K{\"a}sbauer, Johannes and Schmailzl, Anton and Loose, Tobias and Hierl, Stefan}, title = {Thermo-Mechanical Modeling of Quasi-Simultaneous Laser Transmission Welding using LS-DYNA with Focus on Accuracy of Heat Input Calculation}, series = {Technology Day 2020 - Plastics on the test rig, Traboch, 04.03.2020}, journal = {Technology Day 2020 - Plastics on the test rig, Traboch, 04.03.2020}, language = {en} } @article{HuentelmannHierl, author = {H{\"u}ntelmann, Sven and Hierl, Stefan}, title = {AM-gerechte Bauteilgestaltung}, series = {additive - Das Magazin f{\"u}r generative Fertigung}, journal = {additive - Das Magazin f{\"u}r generative Fertigung}, number = {1}, publisher = {Konradin-Verlag Robert Kohlhammer GmbH}, address = {Leinfelden-Echterdingen}, pages = {57}, language = {de} }