@article{WagnerNeidhartWeidlich, author = {Wagner, Bernd and Neidhart, Thomas and Weidlich, Ingo}, title = {Initial findings of the research project: Contact behavior of temporarily fluid, self-compacting backfilling materials and HDPE}, series = {Euroheat and Power/Fernw{\"a}rme International}, volume = {42}, journal = {Euroheat and Power/Fernw{\"a}rme International}, number = {10}, pages = {26 -- 29}, language = {en} } @article{ThielStrasserObergriesseretal., author = {Thiel, Charlotte and Strasser, Juliane and Obergrießer, Mathias and Linner, Thomas}, title = {Strategien zur Implementierung der Kreislaufwirtschaft beim Bauen mit Beton}, series = {Beton- und Stahlbetonbau}, volume = {118}, journal = {Beton- und Stahlbetonbau}, publisher = {Ernst \& Sohn, a Wiley Brand}, address = {Berlin}, doi = {DOI: 10.1002/best.202200118}, abstract = {Beton ist das am meisten verwendete Baumaterial weltweit. CO2-Emissionen, die bei der Zement- und Betonherstellung an-fallen, m{\"u}ssen reduziert, Produktionsmethoden verbessert und Betonzusammensetzungen angepasst werden. Zudem steigt die Nachfrage nach Beton, w{\"a}hrend fossile Brennstoffreserven und die Verf{\"u}gbarkeit von mineralischen Rohstoffen abnehmen. Hinzu kommt, dass bei der Betonherstellung neue mineralogi-sche Phasen entstehen, was ein echtes Recycling erschwert. Die Implementierung kreislaufkonformer Strategien wie der Verl{\"a}ngerung der Nutzungsphase ist ein wichtiger Hebel, um Umweltwirkungen im Bauwesen zu reduzieren, und erfordert die ganzheitliche Betrachtung des Bauwerks. Besonders großes Potenzial liefern hier die digital vernetzte und modellba-sierte Planung sowie die darauf aufbauende robotergest{\"u}tzte Fertigung der Bauteile, mit der sich leicht l{\"o}sbare Verbindun-gen, einfach r{\"u}ckbaubare, multifunktionale, flexible sowie bzgl. Dauerhaftigkeit optimierte Strukturen {\"o}kologisch und kosten-effizient generieren lassen. Technisch w{\"a}ren bereits viele Pro-jekte in der Praxis umsetzbar, allerdings m{\"u}ssen hierzu die rechtlichen Rahmenbedingungen verbessert und b{\"u}rokratische H{\"u}rden abgebaut werden. Dieser Beitrag hat das Ziel, das Be-wusstsein f{\"u}r den n{\"o}tigen Wechsel von der Linear- zur Kreis-laufwirtschaft im Betonbau und den korrespondierenden Daten zu erh{\"o}hen und dem Planer einfache Grunds{\"a}tze f{\"u}r den Ent-wurf, die Ausschreibung und Umsetzung mitzugeben, um jetzt schon einen wichtigen Beitrag zum verantwortungsvollen Um-gang mit immer knapper werdenden Ressourcen zu leisten.}, language = {de} } @inproceedings{GoemmelSpirklNeidhart, author = {G{\"o}mmel, Roland and Spirkl, Florian and Neidhart, Thomas}, title = {Nachweis der Gesamtstandsicherheit geotechnischer Strukturen mit verschiedenartigen pfahlartigen Traggliedern}, series = {Bauen in weichen B{\"o}den: Besondere Herausforderungen in Planung und Ausf{\"u}hrung; Beitr{\"a}ge zum 36. Christian Veder Kolloquium : 28. und 29. Juni 2022, Graz}, booktitle = {Bauen in weichen B{\"o}den: Besondere Herausforderungen in Planung und Ausf{\"u}hrung; Beitr{\"a}ge zum 36. Christian Veder Kolloquium : 28. und 29. Juni 2022, Graz}, publisher = {Technische Universit{\"a}t Graz}, address = {Graz}, pages = {165 -- 181}, language = {de} } @misc{Goemmel, author = {G{\"o}mmel, Roland}, title = {Ein Ansatz zum Nachweis der Gesamtstandsicherheit mit pfahlartigen Traggliedern}, series = {37. Baugrundtagung - Spezialsitzung "Forum f{\"u}r junge Geotechnikingenieure und -Ingenieurinnen", 5. - 8. Oktober 2022, Wiesbaden, Germany}, journal = {37. Baugrundtagung - Spezialsitzung "Forum f{\"u}r junge Geotechnikingenieure und -Ingenieurinnen", 5. - 8. Oktober 2022, Wiesbaden, Germany}, organization = {Deutsche Gesellschaft f{\"u}r Geotechnik e.V. (DGGT)}, language = {de} } @misc{Schermer, author = {Schermer, Detleff}, title = {Mauerwerk-Kalender 2023}, editor = {Schermer, Detleff and Brehm, Eric}, edition = {48. Jahrgang}, publisher = {Ernst \& Sohn GmbH}, address = {Berlin}, isbn = {978-3-433-03374-6}, language = {de} } @inproceedings{HaynackSchneiderTimothyetal., author = {Haynack, Alexander and Schneider, Alexander and Timothy, Jithender J. and Kr{\"a}nkel, Thomas and Gehlen, Christoph and Thiel, Charlotte}, title = {Effect of Chloride Concentration on the Freeze-Thaw Resistance of Concrete}, series = {International RILEM Conference on Synergising expertise towards sustainability and robustness of CBMs and concrete structures, SynerCrete'23 - Volume 2}, booktitle = {International RILEM Conference on Synergising expertise towards sustainability and robustness of CBMs and concrete structures, SynerCrete'23 - Volume 2}, publisher = {Springer}, address = {Cham}, doi = {10.1007/978-3-031-33187-9_83}, pages = {911 -- 921}, abstract = {Performance test methods intend to provide a fast, accurate and precise determination of a particular building material property and thus determine the associated material performance. In concrete, various performance tests are used to classify existing or to approve new materials, to compare concrete compositions or to determine causes of damage in existing structures. The challenge of such test methods is to accelerate natural (very slow) mechanisms to determine the material performance precisely within a short time. However, the attack on the material must not be unrealistically intensive, but must represent reality, just in fast motion. The performance tests used to demonstrate the freeze-thaw resistance of concrete employ a 3\% NaCl solution, with literature data ranging from 1\% to 10\% showing that low concentrations can result in higher surface scaling. In this paper, mortar and concrete specimens are tested at 0, 1, 3, 6, and 9\% NaCl solution following the CDF procedure (DIN CEN/TS 12390-9:2017-05). The results are discussed against the background of the existing literature and show that the damage is critically dependent on the pore system and thus also on the effect of the micro-ice lens pump. With increasing freeze-thaw exposition, the pessimum in the external damage shifts towards a de-icing salt concentration of 6\%. Furthermore, a novel test methodology based on 3D-laserscanning is presented to determine scaling accurately by eliminating side effects that are typically present in current standards.}, language = {en} } @inproceedings{GrimmMuenchmeyerKraenkeletal., author = {Grimm, Benedikt and M{\"u}nchmeyer, Sebastian and Kr{\"a}nkel, Thomas and Gehlen, Christoph and Thiel, Charlotte}, title = {Developing a New Rapid, Relevant, and Reliable (R3) Method for Accelerated Measurement of Carbonation Progress at Gas Overpressure}, series = {International RILEM Conference on Synergising expertise towards sustainability and robustness of CBMs and concrete structures, SynerCrete'23 - Volume 1}, booktitle = {International RILEM Conference on Synergising expertise towards sustainability and robustness of CBMs and concrete structures, SynerCrete'23 - Volume 1}, publisher = {Springer}, doi = {10.1007/978-3-031-33211-1_30}, pages = {336 -- 346}, abstract = {The determination of durability-relevant material resistances of concrete is of great importance. They serve as input to engineering models to predict the durability of structures under real environmental conditions. The natural resistances have to be determined in time-consuming experiments, since the processes in nature are very slow. This is particularly important for new materials where long-term experience is not yet available. Thus, accelerated testing is required. Only that way new materials can be evaluated regarding their durability and subsequently be used in practical applications. For carbonation, a new R3 accelerated test method is presented in this contribution. An automated carbonation pressure chamber was developed. It consists of a pressure vessel, automated in such a way that it can apply gas overpressure of various intensities up to 8 bar to mortar and concrete samples. Simultaneously, it can control and regulate the ambient CO2 concentration from 0 to 99.5\% in a fully automated and continuously variable procedure. Experiments were carried out with varying combinations of gas overpressure at CO2 concentrations of 3 vol.-\% to achieve the most time-efficient carbonation of mortars and concretes. Mortars with different material compositions were used to evaluate the general suitability of the test procedure with the developed equipment. The automated carbonation pressure chamber enables reliable carbonation testing with a total duration under accelerated conditions of only 7 days.}, language = {en} } @incollection{GrewollsGrewolls, author = {Grewolls, Kathrin and Grewolls, Gerald}, title = {Vorteile von BIM f{\"u}r die Brand- und Evakuierungssimulation}, series = {Digitales Bauen mit BIM: Use Case Management im Hochbau}, booktitle = {Digitales Bauen mit BIM: Use Case Management im Hochbau}, editor = {Abbaspour, Amir}, publisher = {Beuth}, isbn = {978-3-410-30243-8}, pages = {69 -- 73}, abstract = {BIM - das ist die Zukunft des Bauwesens. Mit BIM werden neue Grade der Digitalisierung und des vernetzten Arbeitens, des dynamischen Workflows erm{\"o}glicht. Doch wie sieht BIM in der Praxis aus? Das vorliegende Buch geht dieser Frage anhand eines praktischen Beispiels nach. Ein virtuelles Bauprojekt wird in jeder Lebensphase mit BIM realisiert. „Digitales Bauen mit BIM" f{\"u}hrt den Leser durch die verschiedenen Abschnitte, von der Planung {\"u}ber die konkrete Ausf{\"u}hrung bis letztlich zum Betreiben des Geb{\"a}udes. Dabei versteht sich das Buch als Praxisleitfaden: Es setzt auf m{\"o}glichst gut verst{\"a}ndlich aufbereitetes Wissen. Der Band bietet Grundlageninformationen und f{\"u}hrt in die Methode BIM als solche ein, die ihren festen Platz im Prozessmanagement bereits eingenommen hat. Es behandelt aber auch und vor allem die ganz konkreten Abschnitte und Schritte und die zur Anwendung kommenden Techniken, die in einem realen Bauprojekt mit BIM bew{\"a}ltigt werden k{\"o}nnen. Viele Grafiken sorgen f{\"u}r ein hohes Maß an Anschaulichkeit und unterstreichen die Praxisbezogenheit des Werks. Dabei kommen verschiedene Experten zu Wort und geben weitere hilfreiche Praxistipps. Wer eine Schritt-f{\"u}r-Schritt-Anleitung f{\"u}r BIM-Projekte sucht, der ist mit „Digitales Bauen mit BIM" gut beraten.}, language = {de} } @inproceedings{Goemmel, author = {G{\"o}mmel, Roland}, title = {Empfehlungen des Arbeitskreises Stabilisierungss{\"a}ulen - Aktueller Stand}, series = {16. Erdbaufachtagung 2020 "Sicherungen und Stabilisierungen im Erd- und Grundbau", 05.03.- 06.03.2020, Leipzig}, booktitle = {16. Erdbaufachtagung 2020 "Sicherungen und Stabilisierungen im Erd- und Grundbau", 05.03.- 06.03.2020, Leipzig}, abstract = {{\"U}berblick {\"u}ber Stabilisierungss{\"a}ulen-Typen; Bemessungsschema von Stabilisierungss{\"a}ulen; Anwendungsbeispiel "Verkehrsdamm auf Stabilisierungss{\"a}ulen"; Nachweis der Gesamtstandsicherheit (B{\"o}schungsbruch); Nachweis der inneren Tragf{\"a}higkeit der StS}, language = {de} } @misc{OPUS4-6157, title = {Rheologische Messungen an Baustoffen 2020 : Tagungsband zum 29. Workshop und Kolloquium, 11. und 12. M{\"a}rz an der OTH Regensburg}, editor = {Greim, Markus and Kusterle, Wolfgang and Teubert, Oliver}, publisher = {tredition}, address = {Hamburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-347-02887-6}, pages = {100}, language = {de} } @incollection{ZilchFinckh, author = {Zilch, Konrad and Finckh, Wolfgang}, title = {Erweiterung der Verbundmodelle auf eingeschlitzte CFK-Bewehrung}, series = {Befestigungstechnik, Bewehrungstechnik und …}, booktitle = {Befestigungstechnik, Bewehrungstechnik und …}, publisher = {ibidem}, address = {Stuttgart}, isbn = {978-3-8982-1208-3}, language = {de} } @inproceedings{AlbalkhyHernandezValeraKarmaouietal., author = {Albalkhy, Wassim and Hernandez Valera, Elias and Karmaoui, Dorra and Lafhaj, Zoubeir and Linner, Thomas and Ayadi, Syrine and Zerrari, Reda and Boutabba, Assia}, title = {Motives and Barriers for Offsite and Onsite Construction 3D Printing}, series = {Proceedings of the 41st International Symposium on Automation and Robotics in Construction. - Lille, France. - 6/3/2024 - 6/5/2024}, booktitle = {Proceedings of the 41st International Symposium on Automation and Robotics in Construction. - Lille, France. - 6/3/2024 - 6/5/2024}, editor = {Gonzalez-Moret, Vicente and Zhang, Jiansong and Garc{\´i}a de Soto, Borja and Brilakis, Ioannis}, publisher = {International Association for Automation and Robotics in Construction (IAARC)}, issn = {2413-5844}, doi = {10.22260/ISARC2024/0154}, pages = {1190 -- 1197}, abstract = {This study aims to compare between onsite and offsite construction 3D printing (C3DP). For this purpose, the Systematic Literature Review approach (SLR) was employed. The review which was based on studying 48 sources identified six categories to classify the motives and barriers for the two C3DP techniques; cost, transportation, design flexibility, workers and materials, production process, and environmental considerations. The literature identified the cost as the main factor that influences the choice between the two techniques. The presented list of motives and barriers is helpful to support decision-making in C3DP projects.}, language = {en} } @misc{SpirklNeidhart, author = {Spirkl, Florian and Neidhart, Thomas}, title = {Vergleichende CO2-Bilanzierung von Rohrgrabenverf{\"u}llungen mit Sand und ZFSV}, volume = {2023}, pages = {40}, language = {de} } @misc{Appelt, author = {Appelt, Andreas}, title = {BIM - Masterplan in der Lehre}, series = {VSVI-Bayern: Seminar BIM im Verkehrswegebau, 20.05.2025, Unterschleißheim}, journal = {VSVI-Bayern: Seminar BIM im Verkehrswegebau, 20.05.2025, Unterschleißheim}, abstract = {Neben der Vermittlung von grundlegenden Kenntnissen, Fertigkeiten und Kompetenzen im Bereich der Verkehrswegeplanung sind k{\"u}nftig auch die Grundlagen des modellbasierten Planens und die Anwendung in den entsprechenden Softwarel{\"o}sungen zu vermitteln. Um diesem Umstand gerecht zu werden, wurden sowohl der Bachelor- als auch der Masterstudiengang Bauingenieurwesen an der OTH Regensburg neu strukturiert und die Themen Digitalisierung und Nachhaltigkeit im Rahmen von neu geschaffenen Schwerpunkten vertieft und in Modulen zu digitalen Kompetenzen {\"u}ber den gesamten Studienverlauf als Querschnittsthema implementiert. Um vorlesungsbegeleitend den Einsatz von digitalen Methoden zu f{\"o}rdern, wurde im Fachgebiet Straßenplanung / Straßenbau in den letzten Jahren ein durchg{\"a}ngiges Planungsprojekt einer fiktiven Ortsumfahrung entwickelt. Basierend auf realen Grundlagendaten (DGM, Rasterbilder, Achsdaten etc.) wurde die Reallaborsituation „Orstumfahrung Presseck" aufgebaut. Die Herausforderung, um die Ans{\"a}tze des BIM-Masterplans auch in der Lehre zu integrieren liegt in der Vermittlung einer neuen Arbeitsmethodik bei begrenztem zeitlichem Umfang im Rahmen der stark reglementierten Bachelorstudieng{\"a}nge. Der Ansatz, eines durchg{\"a}ngigen Projektes das mittels kurzer Lehrvideos und Anleitungen vorlesungsbegleitend zur Verf{\"u}gung gestellt wird, hat sich bew{\"a}hrt. Durch die konkrete Anwendung modellbasierter Methoden im Sinne einer „Technologie zum Anfassen" wird ein dauerhafter Lernerfolg sichergestellt. Voraussetzung zu diesem Vorgehen ist die stetige Aktualisierung der Unterlagen und die zuverl{\"a}ssige Verf{\"u}gbarkeit von Softwarel{\"o}sungen, was nur mit entsprechender personeller Ausstattung m{\"o}glich ist.}, language = {de} } @book{Finckh, author = {Finckh, Wolfgang}, title = {Stahlbetonkonstruktion 2}, publisher = {Springer Fachmedien Wiesbaden}, address = {Wiesbaden}, isbn = {9783658449605}, issn = {2524-8693}, doi = {10.1007/978-3-658-44961-2}, pages = {XI, 389}, abstract = {Aufbauend auf dem ersten Teil „Stahlbetonkonstruktion" werden in diesem Teil erweiterte Grundlagen der Stahlbetonberechnung erl{\"a}utert. Neben den Torsionsnachweisen, dem genaueren Verfahren zur Durchbiegeberechnung und den Schnittgr{\"o}ßenumlagerungen werden vor allem besonders h{\"a}ufig vorkommende Stahlbetonbauteile behandelt. Zu diesen Bauteilen z{\"a}hlen Aussteifungssysteme, Bodenplatten, Fundamente, liniengelagerte Platten sowie Elementdecken. Hierbei werden bei diesen Bauteilen, welche nahezu in jedem Bauwerk vorkommen, sowohl die Ermittlung der Schnittgr{\"o}ßen wie auch die Bemessung und konstruktive Durchbildung erkl{\"a}rt. Zus{\"a}tzlich wird in diesem Lehrbuch auch die Bemessung des Werkstoffes Stahlfaserbeton, welcher insbesondere bei Bodenplatten im Industriebau verwendet wird, erl{\"a}utert. Die im Lehrbuch vorgestellten theoretischen Grundlagen werden anhand zahlreicher Abbildungen verdeutlicht. In jedem Kapitel sind zum besseren Verst{\"a}ndnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. Nach der erfolgreichen Lekt{\"u}re des ersten Bandes der Reihe „Stahlbetonkonstruktion" wird in diesem zweiten Band das Wissen gefestigt und stark erweitert. Dies erm{\"o}glicht dem Lesenden einen sicheren Umgang mit dem Werkstoff Stahlbeton.}, language = {de} } @book{Finckh, author = {Finckh, Wolfgang}, title = {Verst{\"a}rken von Betonbauteilen}, publisher = {Springer Fachmedien Wiesbaden}, address = {Wiesbaden}, isbn = {9783658458560}, issn = {2524-8693}, doi = {10.1007/978-3-658-45857-7}, pages = {XIV, 490}, abstract = {Dieses Lehrbuch widmet sich dem Bauen im Bestand mit Betonbauteilen und den dabei h{\"a}ufig vorkommenden Verst{\"a}rkungsmaßnahmen. Dazu wird zun{\"a}chst das Sicherheitskonzept bestehender Bauteile erl{\"a}utert. Darauf aufbauend wird die Analyse der Bestandsmaterialien und das Vorgehen bei einer Analyse des Tragverhaltens des Bestandsbauteils bzw. einer Nachrechnung behandelt. Die weiteren Kapitel des Buches besch{\"a}ftigen sich mit dem Verst{\"a}rken der bestehenden Betonbauteile. Hierbei werden alle g{\"a}ngigen Verst{\"a}rkungen im Stahlbetonbau, wie das Verst{\"a}rken mit geklebter Bewehrung, Carbonbeton, Betonschrauben und das Verst{\"a}rken mittels Auf- und Spritzbeton, erkl{\"a}rt. Dabei werden bei allen Verfahren die Gemeinsamkeiten, die Unterschiede sowie die sinnvollsten Anwendungsgebiete herausgearbeitet. Die theoretischen Grundlagen werden anhand zahlreicher Abbildungen verdeutlicht. In jedem Kapitel sind zum besseren Verst{\"a}ndnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. Die erfolgreiche Lekt{\"u}re dieses Buches erm{\"o}glicht dem Lesenden, sich den tragwerksplanerischen Aufgaben von bestehenden Betonbauwerken zu stellen und Verst{\"a}rkungsmaßnahmen zu berechnen.}, language = {de} } @misc{Obergriesser, author = {Obergrießer, Mathias}, title = {Digitale Kompetenzen im Bauwesen: BIM, Lean und KI}, series = {VSVI-Bayern: Seminar BIM im Verkehrswegebau, 20.05.2025, Unterschleißheim}, journal = {VSVI-Bayern: Seminar BIM im Verkehrswegebau, 20.05.2025, Unterschleißheim}, language = {de} } @book{Finckh, author = {Finckh, Wolfgang}, title = {Mit Stabwerkmodellen zur Bewehrungsf{\"u}hrung: Detailnachweise im Stahlbetonbau}, publisher = {Springer Fachmedien}, address = {Wiesbaden}, isbn = {978-3-658-40881-7}, doi = {10.1007/978-3-658-40882-4}, pages = {XIII, 393}, abstract = {Aufbauend auf den Grundlagen des Stahlbetonbaus wird in diesem Lehrbuch das Konzept der Bemessung von Stahlbetonkonstruktionen mittels Stabwerkmodellen erl{\"a}utert. Dieses Bemessungskonzept wird insbesondere im Bereich der Detailnachweise und bei gedrungenen Tragwerken im Stahlbetonbau ben{\"o}tigt. Neben der generellen Modellbildung und Nachweismethodik werden auch die {\"u}blichen Modelle und Nachweise f{\"u}r h{\"a}ufig vorkommende Details vorgestellt. Hierbei werden insbesondere Krafteinleitungsbereiche, Konsolen, ausgeklinkte Auflager, Rahmenknoten, Querschnittsspr{\"u}nge, Tr{\"a}ger{\"o}ffnungen und Wandartige Tr{\"a}ger detailliert behandelt. Die im Lehrbuch vorgestellten theoretische Grundlagen werden anhand zahlreicher Abbildungen erl{\"a}uterten. In jedem Kapitel sind zum besseren Verst{\"a}ndnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten.}, language = {de} } @incollection{SchreyerWedding, author = {Schreyer, Marcus and Wedding, Tim}, title = {Unternehmensgruppe Max B{\"o}gl}, series = {BIM in der Anwendung: Beispiele und Referenzen}, booktitle = {BIM in der Anwendung: Beispiele und Referenzen}, editor = {Przybylo, Jakob}, publisher = {Beuth}, address = {Berlin}, isbn = {978-3-410-26815-4}, pages = {109 -- 119}, subject = {Building Information Modeling}, language = {de} } @inproceedings{LerchNeidhart, author = {Lerch, Maximilian and Neidhart, Thomas}, title = {Messtechnische Ausr{\"u}stung von Betonstopfs{\"a}ulen bei Probebelastungen}, series = {Messen in der Geotechnik 2020, Fachseminar am 20./21. Februar 2020 in Braunschweig}, volume = {110}, booktitle = {Messen in der Geotechnik 2020, Fachseminar am 20./21. Februar 2020 in Braunschweig}, editor = {Stahlmann, Joachim and Hinzmann, Nils and Stein, Philipp and Gattermann, J{\"o}rg}, publisher = {Selbstverlag}, address = {Braunschweig}, isbn = {978-3-948141-02-8}, doi = {10.24355/dbbs.084-201912181435-0}, pages = {275 -- 296}, abstract = {Die Ausr{\"u}stung vollverdr{\"a}ngter pfahlartiger Elemente - bei Keller Betonstopfs{\"a}ulen (BSS) genannt - mit Messtechnik ist w{\"a}hrend der Herstellung wegen des Einsatzes schwerer R{\"u}tteltechnik und fehlender Stahlbewehrung praktisch unm{\"o}glich. In Zusammenarbeit von Keller und der Fakult{\"a}t Bauingenieurwesen der Ostbayerischen Technischen Hochschule Regensburg wurde ein Verfahren zur nachtr{\"a}glichen Installation der Messtechnik entwickelt, das axiale Dehnungsmessungen in den BSS w{\"a}hrend der Probebelastungen erm{\"o}glicht. Die Ausr{\"u}stung besteht u. a. aus faseroptischen Komponenten. Das Verfahren wurde in situ an 1:1 Versuchen auf einem Testfeld sowohl bei statischen als auch dynamischen Probebelastungen umgesetzt. Es wurden zwei unterschiedliche Messtechniken gem{\"a}ß der jeweiligen Art der Probebelastungen eingesetzt. Daneben wurden robuste Piezometer in den Boden eingebracht, die kontinuierliche Porenwasserdruckmessungen nahe der S{\"a}ulen erm{\"o}glichen. Zweck der verwendeten Messtechnik war es vor allem belastbarere Ergebnisse f{\"u}r effektive Bemessungen der Stopfs{\"a}ulen zu liefern.}, language = {de} } @book{Finckh, author = {Finckh, Wolfgang}, title = {Stahlbetonkonstruktion}, publisher = {Springer Fachmedien}, address = {Wiesbaden}, isbn = {978-3-658-41336-1}, doi = {10.1007/978-3-658-41336-1}, pages = {XIII, 443}, abstract = {Die Grundlagen der Berechnung von Stahlbetonbauteilen werden in diesem Lehrbuch anhand der mechanischen Beziehungen erl{\"a}utert. Ausgehend von den Nachweisen f{\"u}r Biegung und Querkraft werden auch die Berechnungen f{\"u}r die im Hochbau {\"u}blichen Stahlbetonbauteile, wie Balken, Platten, St{\"u}tzen und Flachdecken erarbeitet. Neben den Nachweisen f{\"u}r Trag- und Gebrauchstauglichkeit werden aufbauend auf den Bemessungsergebnissen die Konstruktionsregeln und Bewehrungsf{\"u}hrungen umfangreich dargestellt. Die im Lehrbuch vorgestellten theoretischen Grundlagen werden anhand zahlreicher Abbildungen erl{\"a}utert. In jedem Kapitel sind zum besseren Verst{\"a}ndnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. Um die LeserInnen f{\"u}r die Baupraxis vorzubereiten, werden auch die Erstellung von statischen Berechnungen, Schalpl{\"a}nen und von Bewehrungspl{\"a}nen behandelt. Damit wird f{\"u}r den Hochbau eine umfassende Basis des Stahlbetonbaus vermittelt, welche einen erfolgreichen Start ins Berufsleben gew{\"a}hrleistet.}, language = {de} } @unpublished{MalzSindersbergerMonkmanetal., author = {Malz, Sebastian and Sindersberger, Dirk and Monkman, Gareth J. and Steffens, Oliver and Kusterle, Wolfgang}, title = {Determination of the Water Content within Tunnel Linings to Assess Fire Safety}, series = {SSRN Electronic Journal}, journal = {SSRN Electronic Journal}, doi = {10.2139/ssrn.4390700}, pages = {22}, abstract = {Fires in tunnels are known to lead to explosive spalling of the tunnel linings, mainly due to rapid expansion of water as a result of vaporization in the concrete. In order to determine water content and assess fire safety within tunnel linings a novel measurement system has been developed. The development process includes the calibration of the sensor system via both direct and indirect approaches. This work compares both calibration methods and shows the differences that can occur due to measurement uncertainty. This work presents the measured water content within the Inntal tunnel, Austria as a representative tunnel from a total of four investigated tunnels. The obtained water content is compared to that found in the literature, and recommendations for practical work in terms of fire safety is given.}, language = {en} } @incollection{GebhardtLinner, author = {Gebhardt, H. and Linner, Thomas}, title = {DIN Arbeitsausschuss „Alternde Gesellschaften" : Einleitung}, series = {Arbeit und Altern : Eine Bilanz nach 20 Jahren Forschung und Praxis}, booktitle = {Arbeit und Altern : Eine Bilanz nach 20 Jahren Forschung und Praxis}, editor = {Richter, G{\"o}tz}, publisher = {Nomos}, isbn = {9783748909378}, doi = {10.5771/9783748909378-445}, pages = {445 -- 450}, language = {en} } @book{Bulenda, author = {Bulenda, Thomas}, title = {Finite-Element-Modellierung 1}, publisher = {Springer Nature}, isbn = {978-3-658-42203-5}, doi = {10.1007/978-3-658-42204-2}, pages = {XIII, 508 S.}, abstract = {Es gibt eine Vielzahl von „Wie-erstelle-ich-ein Finite-Element-Programm?"-Lehrb{\"u}chern, aber nur recht wenige Ver{\"o}ffentlichungen zur Frage „Wie wende ich ein Finite-Element-Programm an?". Dieses Buch legt den Schwerpunkt auf die zweite Fragestellung. Es basiert auf den Vorlesungen zur Anwendung der Finite-Element-Methode, die der Autor seit 1998 an der OTH Regensburg h{\"a}lt. Deren Inhalte kommen aus seiner T{\"a}tigkeit als Pr{\"u}fingenieur f{\"u}r Baustatik in einem großen M{\"u}nchener Ingenieurb{\"u}ro. Behandelt werden sowohl Fragestellungen, mit denen sich jeder Ingenieur konfrontiert sieht, wenn er Berechnungen mit einem Finite-Element-Programm erstellen will, als auch Problempunkte, die im B{\"u}ro des Autors im Zuge einer Projektbearbeitung auftraten und auf den ersten Blick gar nicht so klar waren. In Teil 1 des zweib{\"a}ndigen Werks werden Themen aus der linearen Statik behandelt.}, language = {de} } @book{Bulenda, author = {Bulenda, Thomas}, title = {Finite-Element-Modellierung 2}, publisher = {Springer Fachmedien}, isbn = {978-3-658-42207-3}, doi = {10.1007/978-3-658-42208-0}, pages = {XIII, 532 S.}, abstract = {​Es gibt eine Vielzahl von „Wie-erstelle-ich-ein Finite-Element-Programm?"-Lehrb{\"u}chern, aber nur recht wenige Ver{\"o}ffentlichungen zur Frage „Wie wende ich ein Finite-Element-Programm an?". Dieses Buch legt den Schwerpunkt auf die zweite Fragestellung. Es basiert auf den Vorlesungen zur Anwendung der Finite-Element-Methode, die der Autor seit 1998 an der OTH Regensburg h{\"a}lt. Deren Inhalte kommen aus seiner T{\"a}tigkeit als Pr{\"u}fingenieur f{\"u}r Baustatik in einem großen M{\"u}nchener Ingenieurb{\"u}ro. Behandelt werden sowohl Fragestellungen, mit denen sich jeder Ingenieur konfrontiert sieht, wenn er Berechnungen mit einem Finite-Element-Programm erstellen will, als auch Problempunkte, die im B{\"u}ro des Autors im Zuge einer Projektbearbeitung auftraten und auf den ersten Blick gar nicht so klar waren. Der 2.Teil des zweib{\"a}ndigen Werkes befasst sich mit Themen aus der nichtlinearen Statik.}, language = {de} } @article{SpirklWittlNeidhart, author = {Spirkl, Florian and Wittl, Theresa and Neidhart, Thomas}, title = {Kohlendioxid-Bilanzierung: Rohrgrabenverf{\"u}llung mit Sand vs. ZFSV}, series = {Korrespondenz Abwasser, Abfall}, volume = {71}, journal = {Korrespondenz Abwasser, Abfall}, number = {4}, publisher = {GFA}, address = {Hennef}, doi = {10.3242/kae2024.04.004}, pages = {294 -- 299}, abstract = {Als Alternative zur konventionellen Bettung von Leitungen und Rohren in Sand werden immer h{\"a}ufiger Zeitweise fließf{\"a}hige, Selbstverdichtende Verf{\"u}llbaustoffe (ZFSV) verwendet. Die Bettung in ZFSV kann zu einer Zeit- und Kostenersparnis f{\"u}hren. In diesem Beitrag wird gezeigt, dass die Verwendung von ZFSV zur Rohrgrabenverf{\"u}llung gegen{\"u}ber der konventionellen Sandbettung neben der Schonung der nat{\"u}rlichen Ressourcen zus{\"a}tzlich ein Einsparpotenzial bez{\"u}glich der Treibhausgasemissionen aufweist.}, language = {de} } @inproceedings{DieckhoffBarliebGrothetal., author = {Dieckhoff, Christina and Barlieb, Christophe and Groth, Christian and Linner, Thomas and Weininger, Florian}, title = {Erfolgsfaktor Interdisziplinarit{\"a}t: Das Lehrformat Digitalisierungskollegs an Bayerischen Hochschulen}, series = {Informatik 2023 : Designing Futures: Zuk{\"u}nfte gestalten ; Tagung vom 26.-29.2023, Berlin}, booktitle = {Informatik 2023 : Designing Futures: Zuk{\"u}nfte gestalten ; Tagung vom 26.-29.2023, Berlin}, publisher = {Gesellschaft f{\"u}r Informatik e.V.}, isbn = {978-3-88579-731-9}, issn = {1617-5468}, doi = {10.18420/inf2023_22}, pages = {241 -- 252}, abstract = {Um den zunehmenden Anforderungen an die Beherrschung digitaler Techniken und an die F{\"a}higkeit zur interdisziplin{\"a}ren Zusammenarbeit an Studierende aller Fachrichtungen zu begegnen wurde das interdisziplin{\"a}re Lehrformat Digitalisierungskollegs f{\"u}r Studierende entwickelt. Das in vielen Fachbereichen ausbauf{\"a}hige Angebot von Digitalthemen in der Hoch- schullehre wird hiermit dauerhaft erweitert. Ein Digitalisierungskolleg besteht aus einer Vorlesungs- reihe mit angrenzendem Seminar, in denen Studierende interdisziplin{\"a}re L{\"o}sungen f{\"u}r Fragen der digitalen Transformation entwickeln. Geleitet werden sie von etablierten Wissenschaftlerinnen und Wissenschaftlern, aktiv betreut und ausgestaltet von ein bis zwei Coaches. Kernelement sowohl des Kollegs als auch der einzelnen Projekte ist die Interdisziplinarit{\"a}t. Eine*r der beteiligten Projekt- leiter*innen hat einen direkten Bezug zur Technik und kommt aus der Informatik, der Wirtschafts- informatik, der Elektrotechnik oder vergleichbaren Disziplinen. Zielgruppe der Projekte sind Studierende verschiedener Disziplinen im Masterstudium oder in den letzten Semestern eines Bachelorstudiums. Durch die Teilnahme erwerben auch Studierende aus digitalisierungsfernen F{\"a}chern fr{\"u}hzeitig umfangreiche IT-Kenntnisse. Als Begleiteffekt der umfangreichen Vernetzung zwischen den Digitalisierungskollegs (Studierende, Coaches und Projektleitende) entsteht bereits zu Beginn einer wissenschaftlichen Karriere eine große digitale Community. Alle Teilnehmenden lernen fr{\"u}hzeitig die interdisziplin{\"a}re Zusammenarbeit und verbessern erheblich ihre Karriere- chancen innerhalb und außerhalb der Wissenschaft.}, language = {de} } @techreport{KuhnFranziusMoelleretal., author = {Kuhn, Alexander and Franzius, Jan Niklas and M{\"o}ller, Dennis and Pralle, Norbert and Reich, Franziska and Hellmuth, Ren{\´e} and Tombeil, Anne-Sophie and Wenzel, G{\"u}nter and Linner, Thomas and Schmailzl, Marc}, title = {Machbarkeitsstudie f{\"u}r den Aufbau eines Kompetenzzentrums f{\"u}r Baurobotik im Hochbau : Akronym: CONSAS (Construction Assistance Robotics) : innerhalb des F{\"o}rderschwerpunktes des BMBF "Roboter f{\"u}r Assistenzfunktionen: Interaktion in der Praxis" Phase 1: Machbarkeitsstudie}, publisher = {Ed. Z{\"u}blin AG}, address = {Stuttgart}, doi = {10.2314/KXP:1845903056}, pages = {30 S.}, abstract = {The overall aim of the project proposal is to develop a systematic, integrative approach for the use of assistance robotics on building construction sites, involving all stakeholders in construction robotics.}, language = {de} } @inproceedings{SaffertSchmailzlSpitzhirnetal., author = {Saffert, Anne-Sophie and Schmailzl, Marc and Spitzhirn, Michael and Linner, Thomas}, title = {A Cyber-Physical Toolbox for Teaching Digital Construction - Technical Configuration, Learning Tactics and Hands-On Testing and Evaluation in Dedicated Courses}, series = {Learning Factories of the Future, Proceedings of the 14th Conference on Learning Factories 2024, Volume 2}, booktitle = {Learning Factories of the Future, Proceedings of the 14th Conference on Learning Factories 2024, Volume 2}, publisher = {Springer Nature}, address = {Cham}, isbn = {9783031653995}, issn = {2367-3370}, doi = {10.1007/978-3-031-65400-8_10}, pages = {83 -- 91}, abstract = {The construction industry faces substantial economic, environmental, and social challenges. Simultaneously, the industry experiences one of the lowest degrees of digitalization. In this context, cyber-physical education is essential to empower learners with skills to utilize digital and physical solutions more effectively. Therefore, a modular as well as construction specific learning setting was designed. The setting facilitates a range of topics, such as production planning considering human and robot capabilities, (semi-) automated construction machines, robotics, sensing \& actuation and more. The digital part of the cyber-physical toolbox consists of various methods and tools to learn programming languages, frameworks, offline simulators, post-processors and more. This step is essential to enable an end-to-end data-/workflow from design (e.g., BIM-based planning methodologies) to (machine-based) production. A focus is given to human-machine/-robot collaboration and appropriate simulation tools (e.g., emaWD) enabling the incorporation of human factors. The physical setting is highly modular, and each device and its periphery can be customized to a broad variety of learning scenarios and levels. This paper describes the details of the learning setting, extracts learning strategies, and analyzes selected learning scenarios and their initial testing in various learning formats.}, language = {en} } @inproceedings{AlbrechtThielHellerbrandetal., author = {Albrecht, Sophie Viktoria and Thiel, Charlotte and Hellerbrand, Stefan and Weininger, Florian}, title = {Possibilities for Reducing the Environmental Impact in the Construction Industry Using the Example of a 3D Printed Staircase}, series = {Proceedings of the 4th International Conference on Sustainable Development in Civil, Urban and Transportation Engineering (CUTE 2024), 14-17 October, Wrocław, Poland}, booktitle = {Proceedings of the 4th International Conference on Sustainable Development in Civil, Urban and Transportation Engineering (CUTE 2024), 14-17 October, Wrocław, Poland}, publisher = {Springer Nature}, isbn = {978-981-97-9400-3}, doi = {10.1007/978-981-97-9400-3_6}, pages = {55 -- 64}, abstract = {The construction industry faces numerous challenges, including environmental sustainability, high material costs, and a shortage of skilled labor. Modern technologies enabling digital fabrication present opportunities to reduce raw material consumption and waste generation. Among these, 3D printing technologies offer distinct advantages over traditional construction methods, particularly in handling complex geometries. However, the significant environmental impact of cement in 3D printed concrete, due to its high rheological and printability requirements, remains a concern. This study introduces a novel application of 3D printed permanent formwork in the construction of a winder staircase, assessed through an environmental Life Cycle Assessment (LCA) from cradle to gate. By comparing the environmental impacts of various construction materials and processes, the study highlights the comparative advantages and disadvantages of conventional methods versus 3D printing. The LCA results reveal that traditional production methods, particularly those using plywood formwork, exhibit higher environmental impacts. In contrast, timber formwork performs better than most 3D printed mixtures in terms of Global Warming Potential (GWP), Acidification Potential (AP), and Abiotic Depletion Potential (ADP). The findings of this study underscore the potential of additive manufacturing for sustainable construction, particularly through the use of low clinker cement in 3D printed formwork, offering a promising pathway towards reducing the environmental footprint of construction activities.}, language = {en} } @article{HaynackTimothyKraenkeletal., author = {Haynack, Alexander and Timothy, Jithender J. and Kr{\"a}nkel, Thomas and Gehlen, Christoph and Thiel, Charlotte}, title = {Analyse des Frost-Tausalz-Widerstands zementgebundener Baustoffe mittels 3D-Laserscanning}, series = {ce/papers: Proceedings in Civil Engineering}, volume = {6}, journal = {ce/papers: Proceedings in Civil Engineering}, number = {6}, publisher = {Ernst \& Sohn}, issn = {2509-7075}, doi = {10.1002/cepa.2951}, pages = {1189 -- 1196}, abstract = {Eine Herausforderung performancebasierter Pr{\"u}fverfahren zur Bewertung der Dauerhaftigkeit ist die Beschleunigung nat{\"u}rlicher Mechanismen. Dies ist notwendig, um innerhalb kurzer Zeit die Langzeit-Leistungsf{\"a}higkeit ermitteln zu k{\"o}nnen. Die Bestimmung der Frost-Tausalzbest{\"a}ndigkeit von Beton kann durch den CDF-Test erfolgen, welcher f{\"u}r Betone mit ausreichendem Frost-Tausalz-Widerstand sehr gut funktioniert. Bei Proben mit einer unzureichenden bzw. unbekannten Performance k{\"o}nnen erh{\"o}hte Randabwitterungen auftreten, welche durch das Abl{\"o}sen des seitlichen Abdichtbands entstehen. Der zunehmende Randeinfluss f{\"u}hrt so zu einer Verf{\"a}lschung der Ergebnisse und zu einer Untersch{\"a}tzung der tats{\"a}chlichen Performance des Bauteils. In diesem Beitrag werden M{\"o}rtel- und Betonprobek{\"o}rper mit unterschiedlichen Abwitterungsraten in Anlehnung an das CDF-Verfahren untersucht. Zus{\"a}tzlich wird die Oberfl{\"a}chensch{\"a}digung der Proben anhand einer neuartigen Messmethode mittels hochaufl{\"o}sendem 3D-Laserscanning ausgewertet. Die Ergebnisse zeigen, dass die Randeffekte mit der Laserscan-Methode umgangen und vergleichbare Ergebnisse zu den CDF-Untersuchungen erzielt werden k{\"o}nnen. Somit k{\"o}nnen Betone ohne Randeinfl{\"u}sse charakterisiert und eine pr{\"a}zise Prognose der Langzeitbest{\"a}ndigkeit getroffen werden.}, language = {de} } @article{GrimmThielKraenkeletal., author = {Grimm, Benedikt and Thiel, Charlotte and Kr{\"a}nkel, Thomas and Gehlen, Christoph}, title = {Einfluss der Permeation auf die Carbonatisierung von Beton}, series = {ce/papers: Proceedings in Civil Engineering}, volume = {6}, journal = {ce/papers: Proceedings in Civil Engineering}, number = {6}, publisher = {Ernst \& Sohn}, address = {Berlin}, issn = {2509-7075}, doi = {10.1002/cepa.3005}, pages = {1348 -- 1357}, abstract = {Die Carbonatisierung von Beton kann einerseits zu Sch{\"a}den bei Stahlbetonbauwerken f{\"u}hren, andererseits kann der Beton so CO2 speichern und damit seinen CO2-Fußabdruck verringern. In diesem Beitrag wird dargestellt, wie eine effiziente Beschleunigung der Carbonatisierung durch Anlegen eines geringen {\"a}ußeren Drucks erreicht werden kann. Damit wird neben der Diffusion der wesentlich schneller ablaufende Transportmechanismus der Permeation ausgenutzt, der das CO2 tiefer in das Probeninnere transportiert und damit in kurzer Zeit die Bestimmung des Carbonatisierungswiderstand zementgebundener Materialien erm{\"o}glicht. Hierzu wurde eine Pr{\"u}feinrichtung entwickelt, die es erm{\"o}glicht, die CO2-Konzentration und in gewissen Grenzen auch relative Luftfeuchte sowie die Temperatur gezielt einzustellen und zu steuern, um so M{\"o}rtel- und Betonproben schnell und pr{\"a}zise zu carbonatisieren. Der Einfluss verschiedener Druckstufen und Wechselzyklen wird dargelegt und die resultierenden chemischen und physikalischen Ver{\"a}nderungen der Proben bestimmt. Als besonders effizient und gleichzeitig realit{\"a}tsnah erwies sich die konstante CO2-Beaufschlagung mit 3 Vol.-\% CO2 mit zus{\"a}tzlichem, moderatem Gasdruck. Das hier entwickelte Verfahren kann daher genutzt werden, um Betone schnell und effizient in zeitraffenden Materialtests hinsichtlich Carbonatisierungswiderstand zu charakterisieren.}, language = {en} } @inproceedings{ThielHechtlGehlenetal., author = {Thiel, Charlotte and Hechtl, C. Maximilian and Gehlen, Christoph and Kr{\"a}nkel, Thomas}, title = {Sustainability Potential of Additive Manufactured Concrete Structures - Studies on the Life Cycle Assessment and Circularity of an Extruded Exterior Wall}, series = {Fourth RILEM International Conference on Concrete and Digital Fabrication (DC 2024), Munich, Germany, September 2024}, booktitle = {Fourth RILEM International Conference on Concrete and Digital Fabrication (DC 2024), Munich, Germany, September 2024}, editor = {Lowke, Dirk and Freund, Niklas and B{\"o}hler, David and Herding, Friedrich}, publisher = {SPRINGER INTERNATIONAL PU}, isbn = {978-3-031-70030-9}, doi = {10.1007/978-3-031-70031-6_2}, pages = {13 -- 21}, abstract = {The Brundtland Report defined sustainable development as a development that meets the needs of the present without compromising the ability of future generations to meet their own needs. If this definition is applied to the construction sector, a new, circular approach to cementitious materials is required. Additive manufacturing (AM) enables to design material-efficient and monolithic structures that meet physical and chemical requirements of building standards while allowing reuse or high-quality recycling of concrete. Here, the environmental impact as well as the circularity potential of an additively manufactured exterior wall, produced by 3D concrete extrusion, are determined. To classify the results, the additively manufactured exterior wall is compared with a conventional concrete construction. Finally, various options for optimizing the printed wall are considered and evaluated. Additive manufacturing enabled significant material savings compared to conventional construction. The environmental impacts strongly depend on the used concrete composition. For example, greenhouse gas emissions could be reduced by 20\% when changing the type of lightweight aggregate. The additively manufactured exterior wall exhibited advantages in terms of circularity. Through further development and research, additive manufacturing of concrete can promote a paradigm shift towards sustainable practices.}, language = {en} } @misc{Schermer, author = {Schermer, Detleff}, title = {Test set-up and proposed testing procedure for the determination of masonry walls under in-plane shear loadings : Brick and Block Masonry: Trends, Innovations and Challenges}, series = {Proceedings of the 16th International Brick and Block Masonry Conference (IMAC), Padova, Italy, 26-30 June 2016}, journal = {Proceedings of the 16th International Brick and Block Masonry Conference (IMAC), Padova, Italy, 26-30 June 2016}, publisher = {Routledge}, pages = {1883 -- 1888}, language = {en} } @misc{Hoeng, type = {Master Thesis}, author = {H{\"o}ng, Simon}, title = {Entwicklung eines digitalen Werkzeugs zur automatisierten Remodellierung von Bauwerken auf Grundlage von Bestandspl{\"a}nen: Erzeugung von synthetischen Daten f{\"u}r KI-L{\"o}sungen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-65218}, school = {Ostbayerische Technische Hochschule Regensburg}, pages = {93}, abstract = {In Anbetracht der hohen Zahl an zu ert{\"u}chtigenden Bauwerken in Deutschland bei gleichzeitig zunehmendem Fachkr{\"a}ftemangel in der Baubranche ist es wichtig, effiziente Planungs- und Bauprozesse zu schaffen. Digitale und automatisierte Arbeitsmethoden auf Basis von digitalen Bauwerksmodellen beginnen sich daher zu etablieren. F{\"u}r viele Bestandsbauwerke werden diese Methoden aber nur z{\"o}gerlich angewendet, da das als Grundlage ben{\"o}tigte digitale Bauwerksmodell erst aufwendig erstellt werden m{\"u}sste. Moderne Techniken der k{\"u}nstlichen Intelligenz (KI) wie Machine- oder Deep Learning bewegen im Moment viele Forschungs- und Wirtschaftsbereiche. Ihr Einsatz kann auch in der Bauwirtschaft L{\"o}sungen f{\"u}r komplexe oder repetitive Aufgaben bieten. In dieser Arbeit wird ein Tool konzipiert und evaluiert, welches in der Lage ist, mithilfe von KI-Techniken aus Bestandspl{\"a}nen dreidimensionale (3D) Bauwerksmodelle zu rekonstruieren. Bei der Konzeptionierung hat sich eine der großen Herausforderung beim Einsatz von Machine Learning herauskristallisiert. Um KI-Systeme {\"u}berwacht trainieren zu k{\"o}nnen, werden sog. gelabelte Trainingsdaten ben{\"o}tigt. In diesem konkreten Fall Positionspl{\"a}ne, bei denen in einer maschinenlesbaren Form hinterlegt ist, welche Art von Bauteilen an welcher Stelle des Planes dargestellt sind. Damit kann eine KI lernen, selbstst{\"a}ndig unbekannte Pl{\"a}ne zu analysieren und darin Bauteile zu klassifizieren. Diese Daten k{\"o}nnen entweder unter großem Aufwand manuell erstellt werden oder man greift auf synthetische Daten zur{\"u}ck. Synthetische Daten sind k{\"u}nstlich erschaffene Daten, die von ihrer Struktur und ihren Eigenschaften her echte Daten imitieren. Da dabei der Erzeugungsprozess gesteuert wird, lassen sich die ben{\"o}tigten Labels gleichzeitig miterzeugen. Auf diese Weise entsteht sog. Ground Truth Data, also Daten, bei denen man sich sicher sein kann, dass sie korrekt gelabelt sind. F{\"u}r diese Arbeit wurde eine Datenpipeline umgesetzt, die in der Lage ist, synthetische Daten speziell f{\"u}r die Zwecke der Baubranche zu generieren. Mithilfe des Applications Programming Interface von Autodesk Revit wurde eine C\#-Anwendung programmiert, die zufallsgesteuert Modelle erzeugt und anhand dieser Modelle realistische Pl{\"a}ne ableitet. Parallel dazu werden mithilfe der im Modell hinterlegten Bauteilinformationen die f{\"u}r die KI ben{\"o}tigten gelabelten Daten erzeugt. Erste Testl{\"a}ufe mit dem Objekterkennungsframework YOLOv5 waren vielversprechend. Der gew{\"a}hlte Ansatz hat sich somit als flexibel und skalierbar erwiesen, um damit KI-Systeme f{\"u}r bauspezifische Aufgaben - wie die Bauteilerkennung auf Pl{\"a}nen - zu trainieren.}, language = {de} } @masterthesis{Janes, type = {Bachelor Thesis}, author = {Janes, Valentin}, title = {Potenziale des Einsatzes von K{\"u}nstlicher Intelligenz zur Rezeptentwicklung und Prognose der Eigenschaften von ZFSV}, doi = {10.35096/othr/pub-7734}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-77347}, school = {Ostbayerische Technische Hochschule Regensburg}, pages = {61}, abstract = {"Methoden der K{\"u}nstlichen Intelligenz (KI) werden im Bauwesen bereits vielf{\"a}ltig eingesetzt. In den meisten F{\"a}llen sind sie jedoch auf Spezial- oder Forschungsprojekte beschr{\"a}nkt. Die Analyse von geotechnischen Labordaten stellt dabei noch eine Ausnahme dar. Die Hauptgr{\"u}nde f{\"u}r den geringen Einsatz von KI-Anwendungen in der Geotechnik liegen nach Ansicht der Autoren neben dem eingeschr{\"a}nkten Zugang zu geeigneten Daten vor allem an Unsicherheiten im Umgang mit KI-Methoden, insbesondere der Nachvollziehbarkeit."(Ren{\´e} Sonnenberg und M Sc David D{\"o}ring, 2023, S. 1) Aus diesem Grund wird in vorliegender Arbeit das Potenzial des Einsatzes von K{\"u}nstlicher Intelligenz zur Rezeptentwicklung und Prognose der Eigenschaften von zeitweise fließf{\"a}higen, selbstverdichtenden Verf{\"u}llbaustoffen (ZFSV) untersucht. ZFSV werden haupts{\"a}chlich im Erd- und Tiefbau eingesetzt. Sie sind eine Mischung, welche in der Lage ist, ohne {\"a}ußere Verdichtung unter dem Einfluss von Schwerkraft Hohlr{\"a}ume vollst{\"a}ndig zu f{\"u}llen. Dabei bietet der ZFSV logistische, {\"o}konomische und {\"o}kologische Vorteile gegen{\"u}ber konventionellen Verf{\"u}llmaterialien wie Sand. Aktuelle Forschungsprojekte an der HafenCity Universit{\"a}t (HCU) in Hamburg zeigen, dass ZFSV mit dem Einsatz von Recycling-Materialien noch nachhaltiger hergestellt werden kann (Weidlich, Banushi, B{\"u}schken u. a., 2022, S. 17). Das Ziel der Arbeit ist es, durch Verwendung digitaler Methoden, geotechnische Labordaten zu strukturieren und mittels KI auszuwerten. Die Auswertung mithilfe von K{\"u}nstlicher Intelligenz erfolgt durch Programmierung einer Anwendung in Python. Mit der Auswertung will man Vorhersagen {\"u}ber die Rezeptur und Eigenschaften von ZFSV treffen. Dadurch ist es m{\"o}glich, den ZFSV ressourcenschonender herzustellen, was gerade angesichts der aktuellen Thematik Nachhaltigkeit im Bausektor und dessen CO2-Bilanz positiv beitragen kann.}, language = {de} } @inproceedings{WiedererHoengEder, author = {Wiederer, Jonas and H{\"o}ng, Simon and Eder, Friedrich}, title = {Konzept zur KI-gest{\"u}tzten parametrischen Br{\"u}ckenmodellierung f{\"u}r ressourcen- und kostenoptimierte Bauwerksentw{\"u}rfe}, series = {Tagungsband 35. Forum Bauinformatik, 2024, Hamburg}, booktitle = {Tagungsband 35. Forum Bauinformatik, 2024, Hamburg}, editor = {St{\"u}hrenberg, Jan and Al-Zuriqat, Thamer and Chillon Geck, Carlos}, publisher = {Technische Universit{\"a}t Hamburg, Institut f{\"u}r Digitales und Autonomes Bauen}, address = {Hamburg}, doi = {10.15480/882.13506}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-77922}, pages = {50 -- 57}, abstract = {Br{\"u}ckenbauwerke stellen eine wesentliche Komponente einer soliden Infrastruktur dar. Wegen vernachl{\"a}ssigter Instandsetzungsmaßnahmen und sich ver{\"a}ndernder Anforderungen sind f{\"u}r eine Vielzahl dieser Bauwerke in Deutschland Ersatzneubauten notwendig. Diese Arbeit adressiert die Herausforderungen der Ressourcenverschwendung durch wiederholten Arbeitsaufwand bei individuellen Br{\"u}ckenentw{\"u}rfen f{\"u}r die angesprochenen Bauwerke. Es wird ein parametrisches Entwurfsmodells in Siemens NX entwickelt, um den Entwurfsprozess zu beschleunigen und eine einfache Anpassung an die entsprechenden Rahmenbedingungen zu erm{\"o}glichen. Zudem wird eine effektive Methode zur Anbindung an die Kostenermittlungssoftware RIB iTWO vorgestellt, die eine nachgelagerte Kostenkalkulation nach DIN 276 erm{\"o}glicht. Aufbauend darauf wird ein Optimierungsworkflow vorgestellt, welcher verschiedene Faktoren einbindet, um einen hochwertigen Bauwerksentwurf zu erzielen. Hierbei wird die Einbindung von Techniken aus dem Bereich der K{\"u}nstlichen Intelligenz angestrebt. Die vorgestellte Methodik soll die Wirtschaftlichkeitsbewertung und Entscheidungsfindung f{\"u}r die Realisierung der Br{\"u}ckenentw{\"u}rfe erleichtern und somit zu einer effizienteren Nutzung von Ressourcen im Br{\"u}ckenbau beitragen.}, language = {de} } @inproceedings{HoengEder, author = {H{\"o}ng, Simon and Eder, Friedrich}, title = {Methode zur Generierung multimodalersynthetischer Daten aus parametrischen BIM-Modellen zur Nutzung in KI-Systemen}, series = {Tagungsband 34. Forum Bauinformatik, 06. - 08.09.2023, Bochum}, booktitle = {Tagungsband 34. Forum Bauinformatik, 06. - 08.09.2023, Bochum}, doi = {10.13154/294-10130}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:294-101306}, pages = {398 -- 405}, abstract = {F{\"u}r die erfolgreiche Implementierung von KI-Systemen ist eine große Menge an relevanten (und gelabelten) Trainingsdaten n{\"o}tig. Die Datenqualit{\"a}t, Format, Struktur und nicht zuletzt urheberrechtliche Belange schr{\"a}nken die unmittelbare Nutzung vorhandener Daten ein und hindern die gewinnbringende Nutzung dieser Technologien in der Praxis. In diesem Beitrag wird ein Ansatz vorgestellt, der auf Basis einer parametrischen bzw. regelbasierten Erstellung von BIM-Modellen synthetische, gelabelte Trainingsdaten f{\"u}r die nachgelagerte Nutzung in diversen KI-Workflows generiert. Die Modelle werden mithilfe einer C\#-Anwendung {\"u}ber die API von Autodesk Revit erzeugt und k{\"o}nnen durch automatisiertes Postprocessing mittels Python zu annotierten Daten in g{\"a}ngigen Austauschformaten aufbereitet werden. Die synthetischen Bauwerksmodelle erm{\"o}glichen die Ableitung multimodaler Trainings-Datens{\"a}tze. Das heißt, sie k{\"o}nnen in unterschiedlichen Dateiformaten vorgehalten werden. Dadurch lassen sich Datens{\"a}tze erzeugen, die auf den jeweiligen Anwendungsfall zugeschnitten sind (z. B.: Rastergrafiken, Punktwolken, CAD- oder BIM-Formate). Die Daten lassen sich somit in entsprechende KI-Systeme integrieren. Dieser L{\"o}sungsansatz wird am Anwendungsbeispiel einer KI-gest{\"u}tzten Objektklassifizierung in 2D-Pl{\"a}nen auf Basis synthetischer Datens{\"a}tze im COCO-Format durchgef{\"u}hrt. Die k{\"u}nstlich erzeugten Plandaten in Anlehnung an Positionspl{\"a}ne von rasterf{\"o}rmig aufgebauten Skelettbauwerken konnten erfolgreich einem KI-System als Trainingsdaten zugef{\"u}hrt werden. Damit wird die nahtlose Verkettung der einzelnen Prozessschritte (Modellierung, Annotation, Integration) validiert. Die Ergebnisse werden abschließend evaluiert und Optimierungsans{\"a}tze diskutiert.}, language = {de} } @inproceedings{HuPanIturraldeetal., author = {Hu, Rongbo and Pan, Wen and Iturralde, Kepa and Linner, Thomas and Bock, Thomas}, title = {Construction Automation and Robotics for Concrete Construction: Case Studies on Research, Development, and Innovations}, series = {Proceedings of the 40th International Association for Automation and Robotics in Construction (ISARC 2023), Chennai, India}, booktitle = {Proceedings of the 40th International Association for Automation and Robotics in Construction (ISARC 2023), Chennai, India}, publisher = {IAARC}, isbn = {978-0-6458322-0-4}, issn = {2413-5844}, doi = {10.22260/ISARC2023/0095}, pages = {683 -- 690}, abstract = {The construction industry, supported by the materials industry, is a major user of natural resources. Automation and robotics have the potential to play a key role in the development of circular construction by increasing productivity, reducing waste, increasing safety, and mitigating labor shortages. Starting with a brief synopsis of the history of construction robotics and the concept of robot-oriented design, this article presents exemplary case studies of research projects and entrepreneurial activities in which the authors have participated that have contributed to the advancement of concrete construction. The activities of the authors have systematically led to spin-offs and start-ups, especially in recent years (e.g., CREDO Robotics GmbH, ARE23 GmbH, KEWAZO GmbH, ExlenTec Robotics GmbH, etc.), which shows that the use of construction robots is becoming an important part of the construction industry. With the use of automation and robotics in the built environment especially for concrete construction, current challenges such as the housing shortage can be addressed using the leading machinery and robot technology in Germany and other parts of the world. The knowledge and know-hows gained in these endeavors will lay the groundwork for the next frontier of construction robotics beyond the construction sites.}, language = {en} } @incollection{KuhnFranziusMoelleretal., author = {Kuhn, Alexander and Franzius, Jan Niklas and M{\"o}ller, Dennis and Pralle, Norbert and Reich, Franziska and Hellmuth, Ren{\´e} and Tombeil, Anne-Sophie and Wenzel, G{\"u}nter and Linner, Thomas and Schmailzl, Marc and Hu, Rongbo and Bock, Thomas and Maufroy, Christophe and Kopp, Verena and B{\"o}lke, Nico and Daub, Urban}, title = {Kompetenzzentrum f{\"u}r Baurobotik im Hochbau (CONSAS) - F{\"o}rderkennzeichen 16SV8637}, series = {Roboter f{\"u}r Assistenzfunktionen: Konzeptstudien f{\"u}r die Interaktion in der Praxis}, booktitle = {Roboter f{\"u}r Assistenzfunktionen: Konzeptstudien f{\"u}r die Interaktion in der Praxis}, isbn = {9783731512448}, pages = {169 -- 207}, language = {de} } @incollection{HuIturraldePanetal., author = {Hu, Rongbo and Iturralde, Kepa and Pan, Wen and Linner, Thomas and Bock, Thomas}, title = {Bauautomatisierung und Robotik im Betonbau: Fallstudien zu Forschung, Entwicklung und Innovation}, series = {Beton-Kalender 2024}, booktitle = {Beton-Kalender 2024}, editor = {Bergmeister, Konrad and Fingerloos, Frank and W{\"o}rner, Johann-Dietrich}, publisher = {Ernst \& Sohn}, address = {Berlin}, isbn = {978-3-433-03407-1}, pages = {563 -- 573}, language = {de} } @inproceedings{HoengEderSchmailzletal., author = {Hoeng, Simon Konrad and Eder, Friedrich and Schmailzl, Marc and Obergrießer, Mathias}, title = {Exploring the Potential of BIM Models for Deriving Synthetic Training Data for Machine Learning Applications, Montreal}, series = {Advances in Information Technology in Civil and Building Engineering, Proceedings of ICCCBE 2024, Volume 2, Simulation and Automation}, booktitle = {Advances in Information Technology in Civil and Building Engineering, Proceedings of ICCCBE 2024, Volume 2, Simulation and Automation}, publisher = {Springer Nature}, address = {Cham}, isbn = {9783031873638}, issn = {2366-2557}, doi = {10.1007/978-3-031-87364-5_5}, pages = {54 -- 63}, abstract = {To increase the efficiency and quality of design and construction tasks, the use of Artificial Intelligence (AI) and Machine Learning (ML) offers a way to automate both repetitive and complex tasks. Many of these ML models rely heavily on large amounts of suitable, machine-readable, and labeled training data. Therefore, a variety of conceivable use cases for ML in the Architecture, Engineering and Construction (AEC) industry are difficult to implement due to a lack of freely and directly usable training data. The process of manually structuring and labeling existing data is time-consuming and needs in some cases skilled personnel to ensure the quality of the labeled data. Due to these factors, approaches for utilizing artificially generated data, referred to as synthetic data, are becoming more prevalent. Since Building Information Models contain a large amount of information, deriving training data from these models presents an obvious route for generation of this data. There are many ML applications whose implementation is inhibited due to a lack of training data, for which model-based synthetic data offer a possible solution approach. The Industry Foundation Classes (IFC) standard provides a powerful exchange format for models independently of their authoring software. Parametric and generative approaches to model creation enable the generation of numerous different building models within a short period of time and with low effort. This paper presents a workflow for automated derivation of synthetic training data from rule-based or parametrically generated models combined with existing IFC datasets as a multimodal data repository. The method is validated by testing automated synthetically labeled image data for a plan detection task, which is carried out with the Object Detection Framework YOLOv8. The suggested workflow has the potential to enhance data accessibility, thereby contributing to the implementation of ML applications in the AEC industry.}, language = {en} } @article{MarzaniTondelliKumaetal., author = {Marzani, Giulia and Tondelli, Simona and Kuma, Yuko and Cruz Rios, Fernanda and Hu, Rongbo and Bock, Thomas and Linner, Thomas}, title = {Embedding Circular Economy in the Construction Sector Policy Framework: Experiences from EU, U.S., and Japan for Better Future Cities}, series = {Smart Cities}, volume = {8}, journal = {Smart Cities}, number = {2}, publisher = {MDPI}, doi = {10.3390/smartcities8020048}, pages = {48}, abstract = {The transition towards a Circular Economy (CE) in the construction sector is essential to achieving sustainable, inclusive smart cities. This study examines the integration of CE principles into construction policies across four key global contexts: the European Union (focusing on Italy and Germany), the United States, and Japan. Through a comparative policy analysis, the research identifies best practices, implementation barriers, and the role of digitalization in advancing CE strategies. In Europe, CE is embedded in policy frameworks such as the Green Deal and the New Circular Economy Action Plan, driving the shift toward sustainable urban development. The United States, while in the early stages of CE adoption, is fostering circular initiatives at local levels, particularly in waste management and building deconstruction. Japan's policy landscape integrates CE within a broader strategy for resource efficiency, emphasizing technological innovation. The findings highlight the necessity of a research-driven approach to inform policies that leverage digital tools, such as Building Information Modeling and Digital Product Passports, to enhance material traceability and urban circularity. This study contributes to the global effort of designing smart cities that are not only technologically advanced but also environmentally and socially sustainable through the adoption of CE principles in the built environment.}, language = {en} } @incollection{LinnerSchmailzlBocketal., author = {Linner, Thomas and Schmailzl, Marc and Bock, Thomas and Hu, Rongbo and G{\"u}ttler, J{\"o}rg}, title = {Active Assisted Living Technology in the Context of the Built Environment}, series = {The Routledge Companion to Ecological Design Thinking: Healthful Ecotopian Visions for Architecture and Urbanism}, booktitle = {The Routledge Companion to Ecological Design Thinking: Healthful Ecotopian Visions for Architecture and Urbanism}, publisher = {Routledge}, address = {New York}, doi = {10.4324/9781003183181-50}, pages = {10}, language = {en} } @inproceedings{EderHoengSchmailzletal., author = {Eder, Friedrich and Hoeng, Simon Konrad and Schmailzl, Marc and Linner, Thomas and Obergrießer, Mathias}, title = {Towards improving data interoperability for the reconstruction of existing buildings}, series = {The 20th conference of the International Society for Computing in Civil and Building Engineering (ICCCBE 2024), August 25 to 28, 2024, Montreal}, booktitle = {The 20th conference of the International Society for Computing in Civil and Building Engineering (ICCCBE 2024), August 25 to 28, 2024, Montreal}, abstract = {Digital representations of buildings are the supporting structures of various use-cases in the emerging field of data-driven decision making. From large scale applications in the context of city planning to the detailed evaluation of critical infrastructure they enable specialists to observe problems, interpret relationships, test solutions virtually and apply them in the real world. This is only feasible if the individual underlying digital model meets the requirements imposed by the analysis at hand. In practice, especially models of existing buildings are not easy to come by as the information describing the existing structure is often scattered across multiple different data sources in various formats. Previous research efforts have outlined methodologies which leverage machine learning, computer vision and subsequent semantic enrichment in order to achieve the (re)construction of such building models. However, these methods are generally not integrated with each other, nor do they consider being able to interface with a shared repository of building related data. In this paper we present a methodology which focuses on establishing a common context for all building related data by utilizing the Industry Foundation Classes (IFC) schema. In particular we focus on utilizing readily available geometric and semantic data originating from geographic information systems as a basis, subsequently referencing additional data sources in their corresponding context and finally outlining interfaces with downstream enrichment processes in both directions. Through incorporating contextualized (IFC) data into the early stages of the remodeling workflow, we outline an end-to-end process from the initial component-based data-acquisition to the as-built building information model. In establishing a standardized foundation for data exchange and collaboration it enables all stakeholders to work more seamlessly across different stages of the remodeling project.}, language = {en} } @inproceedings{SchmailzlSaffertKaramaraetal., author = {Schmailzl, Marc and Saffert, Anne-Sophie and Karamara, Merve and Linner, Thomas and Eder, Friedrich and Hoeng, Simon Konrad and Obergriesser, Mathias}, title = {Enhancing Decision-Making for Human-Centered Construction Robotics: A Methodological Framework}, series = {Proceedings of the 41st International Symposium on Automation and Robotics in Construction (ISARC), Lille, France}, booktitle = {Proceedings of the 41st International Symposium on Automation and Robotics in Construction (ISARC), Lille, France}, publisher = {International Association for Automation and Robotics in Construction (IAARC)}, isbn = {978-0-6458322-1-1}, issn = {2413-5844}, doi = {10.22260/ISARC2024/0083}, pages = {637 -- 644}, abstract = {While the Architecture, Engineering, and Construction (AEC) industry is increasingly aware of the rising demands for productivity and human-centered construction improvements, the holistic adoption of robotics as a fundamental strategy to address these challenges has not yet reached comprehensive fruition. This paper therefore introduces a methodological framework aiming to address the industry's pressing need for a systematic approach for assessing the feasibility of integrating robotics into human-centered construction processes. It aims to enhance decision-making regarding the degree of automation in human-centered construction processes, ranging from partial to full robotization or non-robotization. The framework is characterized by a more holistic end-to-end data-/workflow and therefore adopts a multifaceted approach, leveraging BIM-based planning methodologies and integrating new technologies [e.g., Motion Capturing (MoCap), work process simulation software incorporating Digital Human Models (DHM), self-developed conversion/interfacing software and more] that have not been widely used in the industry to date. Subsequently, the framework is evaluated in a real-life bricklaying construction process to ensure a more application-based approach. Overall, the framework advances current construction processes with a more inclusive and conscious technology infill to empower construction professionals with the workflow and corresponding tools necessary for the practical integration of robotics into human-centered construction processes.}, language = {en} } @inproceedings{SchmailzlSaffertKaramaraetal., author = {Schmailzl, Marc and Saffert, Anne-Sophie and Karamara, Merve and Linner, Thomas and Eder, Friedrich and Hoeng, Simon Konrad and Obergrießer, Mathias}, title = {Enhancing Decision-Making for Human-Centered Construction Robotics: A Methodological Framework}, series = {Proceedings of the 41st International Symposium on Automation and Robotics in Construction (ISARC 2024), 2024, Lille, France}, booktitle = {Proceedings of the 41st International Symposium on Automation and Robotics in Construction (ISARC 2024), 2024, Lille, France}, publisher = {IAARC}, isbn = {978-0-6458322-1-1}, doi = {10.22260/ISARC2024/0083}, pages = {637 -- 644}, abstract = {While the Architecture, Engineering, and Construction (AEC) industry is increasingly aware of the rising demands for productivity and human-centered construction improvements, the holistic adoption of robotics as a fundamental strategy to address these challenges has not yet reached comprehensive fruition. This paper therefore introduces a methodological framework aiming to address the industry's pressing need for a systematic approach for assessing the feasibility of integrating robotics into human-centered construction processes. It aims to enhance decision-making regarding the degree of automation in human-centered construction processes, ranging from partial to full robotization or non-robotization. The framework is characterized by a more holistic end-to-end data-/workflow and therefore adopts a multifaceted approach, leveraging BIM-based planning methodologies and integrating new technologies [e.g., Motion Capturing (MoCap), work process simulation software incorporating Digital Human Models (DHM), self-developed conversion/interfacing software and more] that have not been widely used in the industry to date. Subsequently, the framework is evaluated in a real-life bricklaying construction process to ensure a more application-based approach. Overall, the framework advances current construction processes with a more inclusive and conscious technology infill to empower construction professionals with the workflow and corresponding tools necessary for the practical integration of robotics into human-centered construction processes.}, language = {en} } @incollection{HuBockLuetal., author = {Hu, Rongbo and Bock, Thomas and Lu, Yuan and Linner, Thomas}, title = {A Procedure Model for Developing Gerontechnological Solutions to Achieve Demographic Sustainability in Aging Society}, series = {Sustainable Engeneering}, booktitle = {Sustainable Engeneering}, editor = {Dunmade, Israel Sunday and Daramola, Michael Olawale and Green Energy and Technology,}, publisher = {Springer}, isbn = {978-3-031-47214-5}, doi = {10.1007/978-3-031-47215-2_26}, pages = {449 -- 475}, abstract = {Population aging is arguably one of the most serious challenges facing human society. It is not only a severe crisis in the developed world but also a rigorous threat to emerging economies. Therefore, vigorous measures need to be taken to mitigate the impact of aging society. This chapter proposes a procedure model as the foundation to systematically develop gerontechnological solutions. Based on the analysis of the state-of-the-art assistive smart furniture and smart home solutions and the requirements of older adults, a service system called Ambient Rehabilitation Kit that transforms clinical and care environments into personalized modular sensing, prevention, and intervention systems was proposed, encouraging older adults to become healthier through various activities. To achieve that goal, several modular smart interior devices integrating advanced sensing and assistive technologies were developed which seamlessly materialize the care concepts and functionality. Meanwhile, a strategy for testing and exhibiting the system was proposed. Furthermore, this chapter also introduces a framework for the cost-benefit analysis of the gerontechnological solutions compared to traditional care methods. Finally, in order to mitigate the severe threat imposed by rapid population aging to the social sustainability of emerging economies, the prospects for implementing the Ambient Rehabilitation Kit in China's market are discussed, and a research and development action plan is proposed based on the results of a nationwide opinion survey.}, language = {en} } @inproceedings{BulendaKnippersSailer, author = {Bulenda, Thomas and Knippers, Jan and Sailer, S.}, title = {Untersuchungen zum Tragverhalten von Netzkuppeln}, series = {Finite Elemente in der Baupraxis : Modellierung, Berechnung und Konstruktion ; Beitr{\"a}ge der Tagung FEM '95 an der Universit{\"a}t Stuttgart am 23. und 24. Februar 1995}, booktitle = {Finite Elemente in der Baupraxis : Modellierung, Berechnung und Konstruktion ; Beitr{\"a}ge der Tagung FEM '95 an der Universit{\"a}t Stuttgart am 23. und 24. Februar 1995}, editor = {Ramm, Ekkehard and Stein, W. and Wunderlich, W.}, publisher = {Ernst}, address = {Berlin}, isbn = {978-3-433-01289-5}, pages = {201 -- 212}, language = {de} } @inproceedings{BulendaKnippersPark, author = {Bulenda, Thomas and Knippers, Jan and Park, D.-U.}, title = {Traglastberechnung von Gitterschalentonnen}, series = {Software f{\"u}r Statik und Konstruktion : Berichte des 9.SOFiSTiK Anwender Seminars, N{\"u}rnberg, Juni 1997}, booktitle = {Software f{\"u}r Statik und Konstruktion : Berichte des 9.SOFiSTiK Anwender Seminars, N{\"u}rnberg, Juni 1997}, editor = {Katz, Casimir and Protopsaltis, Byron}, isbn = {9789054109549}, pages = {437 -- 460}, language = {de} }