@inproceedings{RothHauslerBierl, author = {Roth, Carina and Hausler, Peter and Bierl, Rudolf}, title = {Einbindung eines 2D-Photodetektors in einen hochintegrierten SPR-Imaging-Sensor}, series = {118. Jahrestagung der deutschen Gesellschaft f{\"u}r angewandte Optik (DGaO), 6.-10. Juni 2017, Dresden}, booktitle = {118. Jahrestagung der deutschen Gesellschaft f{\"u}r angewandte Optik (DGaO), 6.-10. Juni 2017, Dresden}, abstract = {Mit der Oberfl{\"a}chenplasmonenresonanzspektroskopie (SPR) k{\"o}nnen Brechungsindex{\"a}nderungen eines Analyten von bis zu 10-6 RIU detektiert werden. Das SPR-Imaging bietet heute gegen{\"u}ber der konventionellen SPR-Analyse die M{\"o}glichkeit, mehrere einzelne Messungen parallel durchf{\"u}hren zu k{\"o}nnen. Mit Hilfe eines zweidimensionalen Sensorchips und einer leistungsf{\"a}higen Boardlevelkamera k{\"o}nnen die Abbildungen des Chips direkt an einen Rechner {\"u}bertragen und dort verarbeitet werden. Aufgrund unterschiedlicher Winkelstellungen und der Geometrie des Aufbaus entstehen Stauchungen und Streckungen des abgebildeten Sensorchips, die mit verschiedenen Ans{\"a}tzen aus der Bildverarbeitung ausgeglichen werden, um die Bilder miteinander vergleichen zu k{\"o}nnen. Zudem wird die G{\"u}te der Referenz- und Messbereiche des Chips bestimmt. Diese Algorithmen sind nur m{\"o}glich aufgrund der heutigen, leistungsf{\"a}higen Rechner und der immer gr{\"o}ßer werdenden Durchsatzraten der Kameras. Dabei kommt in dieser Anwendung der relativ neue Kamerastandard USB3 Vision zum Einsatz. Dieser zeichnet sich zus{\"a}tzlich durch das Plug and Play und seinen Standardstecker, der an (fast) jedem Rechner vorhanden ist, aus.}, language = {de} } @inproceedings{ZhouLandgrafRuecketal., author = {Zhou, Qi and Landgraf, Ferdinand and R{\"u}ck, Thomas and Bierl, Rudolf}, title = {Resonance frequency tuning and process design of a micromechanical capacitive cantilever in a photoacoustic trace-gas sensing device}, series = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, booktitle = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, publisher = {VDE-Verlag}, address = {Berlin}, isbn = {978-3-8007-4491-6}, abstract = {Photoacoustic spectroscopy is an efficient method to detect the concentration of trace gases with following advantages: short response time, high sensitivity, continuous and real-time monitoring and the option of miniaturization without the need of complex mirror-based multi-pass cell designs. A micromechanical cantilever is used as a key component in a two-part "Cantilever-Resonator" system that detects the weak photoacoustic signal. The resonance frequency of cantilever needs to be tuned to match the resonance frequency of resonator in order to achieve the maximum vibration amplitude of the "Cantilever-Resonator" system. This paper reports a post-fabrication method to tune the resonance frequency of cantilevers via focused ion beam (FIB) and a capacitive solution for the cantilever to transform the acoustic signal to electrical signal.}, language = {en} } @article{vanderWeerdBierlMatysik, author = {van der Weerd, Bastiaan and Bierl, Rudolf and Matysik, Frank-Michael}, title = {Trends in Electrochemical Sensing of Blood Gases}, series = {Bioanalytical Reviews}, volume = {6}, journal = {Bioanalytical Reviews}, publisher = {Springer}, address = {Berlin}, doi = {10.1007/11663_2016_1}, pages = {263 -- 280}, abstract = {The monitoring of partial pressures of the blood gases carbon dioxide (pCO2) and oxygen (pO2) is of great importance in clinical diagnostics. The measure of pCO2 and pO2 provides essential information about the patient's metabolism, gas exchange, ventilation, and acid-base homeostasis. The conventional electrochemical methods for clinical blood gas analysis are based on the potentiometric Severinghaus sensor for carbon dioxide and the amperometric Clark sensor for oxygen. These techniques are well established and are only shortly discussed in this overview. However, in recent years a variety of modifications of these classical sensor concepts and new approaches of electrochemical sensing of pCO2 and pO2 have been introduced. This review summarizes recent developments in this field and discusses the potential for future applications in clinical blood gas analysis.}, language = {en} } @inproceedings{RueckLaeppleBierl, author = {R{\"u}ck, Thomas and L{\"a}pple, I. and Bierl, Rudolf}, title = {Photoakustische Spurengasanalytik von NO2 im ppt-Bereich (10^-12) bei Verwendung kosteng{\"u}nstiger Einzelkomponenten}, series = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, booktitle = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, publisher = {VDE-Verlag}, address = {Berlin}, isbn = {978-3-8007-4491-6}, language = {de} } @article{ZaglerLandgrafRuecketal., author = {Zagler, Andreas and Landgraf, Ferdinand and R{\"u}ck, Thomas and Bierl, Rudolf}, title = {Entwicklung eines mikromechanischen kapazitiven Schalldetektors im resonanten Betrieb f{\"u}r die photoakustische Spurengasanalyse}, series = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, journal = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, publisher = {VDE-Verlag}, address = {Berlin}, language = {de} } @inproceedings{GaidaWeiglRuecketal., author = {Gaida, Peter and Weigl, Stefan and R{\"u}ck, Thomas and Bierl, Rudolf}, title = {Portable photoakustische Messeinheit zur NO2 Detektion im Spurenbereich}, series = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, booktitle = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, publisher = {VDE-Verlag}, address = {Berlin}, isbn = {978-3-8007-4491-6}, language = {de} } @inproceedings{Fischer, author = {Fischer, Johannes}, title = {Miniaturisierter plasmonischer Sensor f{\"u}r das Monitoring von Weichmachern in Gew{\"a}sserproben}, series = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, booktitle = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, publisher = {VDE-Verlag}, address = {Berlin}, isbn = {978-3-8007-4491-6}, language = {de} } @misc{HauslerRothVitzthumeckeretal., author = {Hausler, Peter and Roth, Carina and Vitzthumecker, Thomas and Fischer, Johannes and Bierl, Rudolf}, title = {Motionless SPR-angle scan with a miniaturized device}, series = {Europtrode XIV, Naples, 25-28 March 2018}, journal = {Europtrode XIV, Naples, 25-28 March 2018}, language = {en} } @inproceedings{WeiglGaidaRuecketal., author = {Weigl, Stefan and Gaida, Peter and R{\"u}ck, Thomas and Bierl, Rudolf}, title = {Portable Measurement Unit for NO2 Trace Gas Detection}, series = {PHOTOPTICS 2018, 6th International Conference on Photonics, Optics and Laser Technology, 25 - 27 January 2018, Funchal Madeira}, booktitle = {PHOTOPTICS 2018, 6th International Conference on Photonics, Optics and Laser Technology, 25 - 27 January 2018, Funchal Madeira}, language = {en} } @techreport{UngerRueckLandgrafetal., author = {Unger, J. and R{\"u}ck, Thomas and Landgraf, Ferdinand and Bierl, Rudolf}, title = {Herstellung und Analyse der Resonanzfrequenz eines MEMS Cantilever f{\"u}r das CEPAS Verfahren}, abstract = {Diese Abhandlung beschreibt das Konzept eines mikroeletromechanischen Systems (MEMS), das im Messverfahren der cantilever enhanced photoacoustic spectroscopy (CEPAS) Verwendung finden soll. Es wird die Herstellung eines einseitig eingespannten Biegebalkens aus Silizium mittels deep reactiv ion etching (DRIE) beschrieben. Des Weiteren wird die Resonanzfrequenz dieses Cantilevers mit Hilfe Laservibrometertechnik untersucht. Die resultierenden resonanten Schwingungen 0.Ordnung werden mit den Ergebnissen einer vereinfachten theoretischen N{\"a}herung verglichen. Die Messergebnisse stehen in gutem Zusammenhang mit den theoretischen Werten. Solche Cantilever, die aus silicon on insula tor (SOI) Wafer angefertigt wurden, weisen bei einer Zielfrequenz ein mittlere Abweichung von Δf = 118±26Hz (bzw.Δf =0,76±0,17\%) auf.}, language = {de} } @inproceedings{HollerHauslerRothetal., author = {Holler, Sven and Hausler, Peter and Roth, Carina and Bierl, Rudolf}, title = {Gestapelte Au-Al-Au und Au-Ag-Au Schichten als aktive Schichten f{\"u}r die Oberfl{\"a}chenplasmonenresonanzspektroskopie}, series = {5. Landshuter Symposium Mikrosystemtechnik, M{\"a}rz 2016}, booktitle = {5. Landshuter Symposium Mikrosystemtechnik, M{\"a}rz 2016}, publisher = {Fachhochschule Landshut}, address = {Landshut}, isbn = {978-3-9812696-9-7}, pages = {192 -- 198}, language = {de} } @inproceedings{RothHauslerBierl, author = {Roth, Carina and Hausler, Peter and Bierl, Rudolf}, title = {Einbindung eines CMOS-Detektors in einen hochintegrierten SPR-Sensor}, series = {5. Landshuter Symposium Mikrosystemtechnik, M{\"a}rz 2016}, booktitle = {5. Landshuter Symposium Mikrosystemtechnik, M{\"a}rz 2016}, publisher = {Fachhochschule Landshut}, address = {Landshut}, isbn = {78-3-9812696-9-7}, pages = {200 -- 205}, language = {de} } @incollection{LangSteinbornSteffensetal., author = {Lang, Christian and Steinborn, Florian and Steffens, Oliver and Lang, Elmar Wolfgang}, title = {Applying a 1D-CNN Network to Electricity Load Forecasting}, series = {Theory and Applications of Time Series Analysis}, booktitle = {Theory and Applications of Time Series Analysis}, editor = {Valenzuela, O. and Rojas, F. and Herrera, L.J. and Pomares, H. and Rojas, I.}, publisher = {Springer}, doi = {10.1007/978-3-030-56219-9_14}, pages = {205 -- 218}, abstract = {This paper presents a convolutional neural network (CNN) which can be used for forecasting electricity load profiles 36 hours into the future. In contrast to well established CNN architectures, the input data is one-dimensional. A parameter scanning of network parameters is conducted in order to gain information about the influence of the kernel size, number of filters and number of nodes. Furthermore, different dropout methods are applied to the CNN and are evaluated. The results show that a good forecast quality can already be achieved with basic CNN architectures, the dropout improves the forecast. The method works not only for smooth sum loads of many hundred consumers, but also for the load of single apartment buildings.}, language = {en} } @article{ReutherSteffens, author = {Reuther, Maike and Steffens, Oliver}, title = {Evaluation der Bauteiltemperierung f{\"u}r den Herzogskasten Abensberg}, series = {Bauphysik}, volume = {37}, journal = {Bauphysik}, number = {2}, publisher = {Ernst \& Sohn, a Wiley Brand}, doi = {10.1002/bapi.201510010}, pages = {96 -- 99}, abstract = {Die These, dass die Methode der direkten Temperierung von erdber{\"u}hrten oder anderweitig feuchtebelasteten Bauteilen zur Beseitigung von Feuchtesch{\"a}den in Bestandsgeb{\"a}uden auch die Energieeffizienz des Geb{\"a}udes erh{\"o}hen und sogar ohne weitere energetische Sanierungsmaßnahmen die Anforderungen der Energieeinsparverordnung (EnEV) erf{\"u}llen kann, wird anhand des als Museum genutzten Herzogskastens in Abensberg {\"u}berpr{\"u}ft. In Verbindung mit einer Evaluation der Trocknungswirkung wird die Geb{\"a}ude-Energieeffizienz durch Vergleich von Bedarfsberechnungen auf Basis der DIN V 18599 mit realen Verbrauchszahlen {\"u}berpr{\"u}ft und diskutiert.}, language = {de} } @techreport{SchlampEhrlich, author = {Schlamp, Matthias and Ehrlich, Ingo}, title = {Analyse des Impact-Verhaltens gekr{\"u}mmter Strukturbauteile von Luftfahrzeugen zur Entwicklung eines Struktur{\"u}berwachungssystems f{\"u}r faserverst{\"a}rkte Kunststoffe - BIRD}, series = {Forschung 2019 / Ostbayerische Technische Hochschule Regensburg}, journal = {Forschung 2019 / Ostbayerische Technische Hochschule Regensburg}, editor = {Baier, Wolfgang}, publisher = {VMK Verlag f{\"u}r Marketing \& Kommunikation GmbH \& Co. KG}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-9818209-6-6}, pages = {40 -- 41}, abstract = {Die in Flugvorausrichtung weisenden Bauteile von Luftfahrzeugen sind oftmals durch Einschl{\"a}ge aufgrund von Vogelschlag, Hagel oder aufgewirbelten Kleinteilen gef{\"a}hrdet. Diese Einschl{\"a}ge, sogenannte Impacts, weisen bei faserverst{\"a}rkten Kunststoffen ein stark kr{\"u}mmungs- und materialabh{\"a}ngiges Verhalten und Schadensausmaß auf. Impact-Sch{\"a}digungen f{\"u}hren oftmals zu hohen Reparaturkosten, welche durch eine genauere Kenntnis des Schadens verringert werden k{\"o}nnen. Zur Klassifizierung dieser Sch{\"a}digungen steht dabei vor allem das auftretende Frequenz signal des Impacts im Fokus der Untersuchungen.}, language = {de} } @article{RomanoMicklitzOlbrichetal., author = {Romano, Marco and Micklitz, Matthias and Olbrich, Florian and Bierl, Rudolf and Ehrlich, Ingo and Gebbeken, Norbert}, title = {Experimental investigation of damping properties of unidirectionally and fabric reinforced plastics by the free decay method}, series = {Journal of Achievements in Materials and Manufacturing Engineering}, volume = {63}, journal = {Journal of Achievements in Materials and Manufacturing Engineering}, number = {2}, pages = {65 -- 80}, abstract = {Purpose: of this paper is experimental investigation of damping properties of unidirectionally and fabric reinforced plastics by the free decay method. Design/methodology/approach: For the evaluation of the presumed effect experimental structural dynamic investigations comparing unidirectionally and fabric reinforced plastics are carried out. In detail the free decay behaviour of flat beamlike specimens under fixed-free boundary conditions and relatively constant and reproducible displacement excitation is investigated. Findings: The vibrating structure has been measured by a laser scanning vibrometer PSV 400 from POLYTEC. In both cases evaluation of the results yields enhanced damping properties of the specimens with fabric reinforcement compared to the unidirectionally reinforced specimens. The results justify the presumed acting of a mesomechanic kinematic. Research limitations/implications: The results show that in either case the material damping in terms of the logarithmic decrement of the fabric reinforced material is higher than the material damping in of the unidirectionally reinforced material. Additionally, when the fabric reinforced specimens are addressed, in each case the plain weave reinforced specimens exhibited higher values of the material damping as the twill weave 2/2 reinforced ones. Originality/value: Ondulations in fabrics as a textile semi-finished product are caused by the alternating crossing of warp and fill yarns. In the mesoscopic scale the acting of a mesomechanic kinematic is presumed to enhance the damping properties under cyclic elastic deformation. For the evaluation of the presumed effect experimental structural dynamic investigations comparing unidirectionally and fabric reinforced plastics are carried out.}, language = {en} } @inproceedings{JobstBierl, author = {Jobst, Simon and Bierl, Rudolf}, title = {A Comparison of Correlation and Zero-Crossing Based Techniques in Ultrasonic Measurement}, series = {10th International Symposium on Applied Reconfigurable Computing (ARC'2014), Vilamoura, Algarve, Portugal, 14 - 16 April, 2014}, booktitle = {10th International Symposium on Applied Reconfigurable Computing (ARC'2014), Vilamoura, Algarve, Portugal, 14 - 16 April, 2014}, abstract = {Ultrasound measurement technology has advancedin previous decades due to positive developments in computing power and lower cost for the necessary hardware. Correlation-based processing can be advantageous for high-accuracy measurements, especially in noisy environments. Higher computational load makes correlation less attractive for industrialapplications, though, favouring traditional processing techniques. A platform for comparing various processing techniques hasbeen developed. It was found that both zero-crossing detectionas well as correlation can achieve very high accuracy over a hightemperature range but that correlation-based processing can lead to a significant precision bias depending on system bandwidth.}, language = {en} } @inproceedings{HofmannBierlRueck, author = {Hofmann, Matthias and Bierl, Rudolf and R{\"u}ck, Thomas}, title = {Implementation of a dual-phase lock-in amplifier on a TMS320C5515 digital signal processor}, series = {Proceedings of the 5th European DSP Education and Research Conference (EDERC), 13-14 Sept. 2012, Amsterdam}, booktitle = {Proceedings of the 5th European DSP Education and Research Conference (EDERC), 13-14 Sept. 2012, Amsterdam}, doi = {10.1109/EDERC.2012.6532217}, abstract = {A digital dual-phase lock-in amplifier that is capable to run on a low-cost, low-power platform comprising a 16-bit fixed-point digital signal processor was developed. This is achieved by a set of optimised digital filters including an exponential averager to adjust the time constant of the overall filter. The reference frequency is generated using a direct digital synthesis source utilising angle decomposition with a resolution of 1 Hz. The digital lock-in algorithm is described and the performance of the algorithm is analysed. The experimental results show that the developed lock-in amplifier achieves similar performance to a commercially available lock-in amplifier.}, language = {en} } @inproceedings{RueckLandgrafLaeppleetal., author = {R{\"u}ck, Thomas and Landgraf, Ferdinand and L{\"a}pple, I. and Unger, J. and Matysik, Frank-Michael and Bierl, Rudolf}, title = {Specification of an improved photoacoustic setup for high-sensitive, low-cost NO2 trace gas detection}, series = {18th International Conference on Photoacoustic and Photothermal Phenomena (ICPPP18), 2015, September 6-10, Novi Sad, Serbia}, booktitle = {18th International Conference on Photoacoustic and Photothermal Phenomena (ICPPP18), 2015, September 6-10, Novi Sad, Serbia}, language = {en} } @inproceedings{vanderWeerdBierlMatysik, author = {van der Weerd, Bastiaan and Bierl, Rudolf and Matysik, Frank-Michael}, title = {A Conductivity Probe for the Determination of Carbon Dioxide Tension at the Oxygenator Exhaust Outlet during Extracorporeal Membrane Oxygenation (ECMO)}, series = {analytica Conference 2014, 1. bis 4. April, M{\"u}nchen}, booktitle = {analytica Conference 2014, 1. bis 4. April, M{\"u}nchen}, language = {en} }