@article{BeckerRaikherStolbovetal., author = {Becker, Tatiana I. and Raikher, Yuriy L. and Stolbov, Oleg V. and B{\"o}hm, Valter and Zimmermann, Klaus}, title = {Magnetoactive elastomers for magnetically tunable vibrating sensor systems}, series = {Physical Sciences Reviews}, volume = {7}, journal = {Physical Sciences Reviews}, number = {10}, publisher = {de Gruyter}, issn = {2365-659X}, doi = {10.1515/psr-2019-0125}, pages = {1 -- 28}, abstract = {Magnetoactive elastomers (MAEs) are a special type of smart materials consisting of an elastic matrix with embedded microsized particles that are made of ferromagnetic materials with high or low coercivity. Due to their composition, such elastomers possess unique magnetic field-dependent material properties. The present paper compiles the results of investigations on MAEs towards an approach of their potential application as vibrating sensor elements with adaptable sensitivity. Starting with the model-based and experimental studies of the free vibrational behavior displayed by cantilevers made of MAEs, it is shown that the first bending eigenfrequency of the cantilevers depends strongly on the strength of an applied uniform magnetic field. The investigations of the forced vibration response of MAE beams subjected to in-plane kinematic excitation confirm the possibility of active magnetic control of the amplitude-frequency characteristics. With change of the uniform field strength, the MAE beam reveals different steady-state responses for the same excitation, and the resonance may occur at various ranges of the excitation frequency. Nonlinear dependencies of the amplification ratio on the excitation frequency are obtained for different magnitudes of the applied field. Furthermore, it is shown that the steady-state vibrations of MAE beams can be detected based on the magnetic field distortion. The field difference, which is measured simultaneously on the sides of a vibrating MAE beam, provides a signal with the same frequency as the excitation and an amplitude proportional to the amplitude of resulting vibrations. The presented prototype of the MAE-based vibrating unit with the field-controlled "configuration" can be implemented for realization of acceleration sensor systems with adaptable sensitivity. The ongoing research on MAEs is oriented to the use of other geometrical forms along with beams, e.g. two-dimensional structures such as membranes.}, language = {de} } @article{PremSindersbergerStriegletal., author = {Prem, Nina and Sindersberger, Dirk and Striegl, Birgit and B{\"o}hm, Valter and Monkman, Gareth J.}, title = {Shape memory effects using magnetoactive Boron-organo-silicon oxide polymers}, series = {Macromolecular Chemistry and Physics}, volume = {221}, journal = {Macromolecular Chemistry and Physics}, number = {15}, publisher = {Wiley}, doi = {10.1002/macp.202000149}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-23205}, pages = {1 -- 8}, abstract = {Thermomechanical shape memory materials have certain disadvantages when it comes to 3D volumetric reproduction intended for rapid prototyping or robotic prehension. The need to constantly supply energy to counteract elastic retraction forces in order to maintain the required geometry, together with the inability to achieve conformal stability at elevated temperatures, limits the application of thermal shape memory polymers. Form removal also presents problems as most viscoelastic materials do not ensure demolding stability. This work demonstrates how magnetoactive boron-organo-silicon oxide polymers under the influence of an applied magnetic field can be used to achieve energy free sustainable volumetric shape memory effects over extended periods. The rheopectic properties of boron-organo-silicon oxide materials sustain form removal without mold distortion.}, language = {en} } @article{SchaefferHerrmannSchratzenstalleretal., author = {Schaeffer, Leon and Herrmann, David and Schratzenstaller, Thomas and Dendorfer, Sebastian and B{\"o}hm, Valter}, title = {Preliminary theoretical considerations on the stiffness characteristics of a tensegrity joint for the use in dynamic orthoses}, series = {Journal of Medical Robotics Research}, journal = {Journal of Medical Robotics Research}, publisher = {World Scientific}, doi = {10.1142/S2424905X23400081}, abstract = {Early motion therapy plays an important role for effective long-term healing of joint injuries. In many cases, conventional dynamic orthoses fail to address the intricate movement possibilities of the underlying joints, limited by their simplistic joint representations, often represented by revolute joints, enabling rotations by only one axis. In this paper, a two-dimensional compliant tensegrity joint for use in biomedical applications is investigated. It consists of two compressed members and five compliant tensioned members. Relative movement possibilities are realized by the intrinsic compliance of the structure. In the development of these systems, the first step is the determination of the static stable equilibrium. This analysis is conducted in this paper by considering the potential energy approach or by using the geometric nonlinear finite element method. The mechanical behavior of the structure is assessed with a specific emphasis on its mechanical compliance. The primary objective of this study is the investigation of the influence of structural parameters on the overall stiffness and movability of the structure. The results underscore the significant effect of member parameters on the stiffness and movability of the compliant tensegrity joint, particularly under varying load magnitudes. These findings provide insights for optimizing the joint's performance, contributing to its potential application in advanced orthotic and exoskeleton devices.}, language = {en} } @article{SchorrCarrilloLiKaufholdetal., author = {Schorr, Philipp and Carrillo Li, Enrique Roberto and Kaufhold, Tobias and Rodriguez Hernandez, Jorge Antonio and Zentner, Lena and Zimmermann, Klaus and B{\"o}hm, Valter}, title = {Kinematic analysis of a rolling tensegrity structure with spatially curved members}, series = {Meccanica}, volume = {56}, journal = {Meccanica}, publisher = {Springer}, organization = {Springer}, issn = {0025-6455}, doi = {10.1007/s11012-020-01199-x}, pages = {953 -- 961}, abstract = {In this work, a tensegrity structure with spatially curved members is applied as rolling locomotion system. The actuation of the structure allows a variation of the originally cylindrical shape to a conical shape. Moreover, the structure is equipped with internal movable masses to control the position of the center of mass of the structure. To control the locomotion system a reliable actuation strategy is required. Therefore, the kinematics of the system considering the nonholonomic constraints are derived in this paper. Based on the resulting insight in the locomotion behavior a feasible actuation strategy is designed to control the trajectory of the system. To verify this approach kinematic analyses are evaluated numerically. The simulation data confirm the path following due to an appropriate shape change of the tensegrity structure. Thus, this system enables a two-dimensional rolling locomotion.}, language = {en} } @article{SchorrZentnerZimmermannetal., author = {Schorr, Philipp and Zentner, Lena and Zimmermann, Klaus and B{\"o}hm, Valter}, title = {Jumping locomotion system based on a multistable tensegrity structure}, series = {Mechanical systems and signal processing}, journal = {Mechanical systems and signal processing}, number = {152}, publisher = {Elsevier}, doi = {10.1016/j.ymssp.2020.107384}, abstract = {All known locomotion principles are limited respective to environmental conditions. Often, the occurrence of obstacles or gaps means the break-off for the operating motion systems. For such circumstances, a controllable jumping locomotion is required to cross these barriers. However, this locomotion demands sophisticated requirements to the actuation. The abrupt actuation is commonly realized by high dynamic actuators or complex mechanisms. In this work, a simple solution utilizing the multistability of a compliant tensegrity structure is described. Therefore, a two-dimensional tensegrity structure featuring four stable equilibria is considered. Based on bifurcation analyses a feasible actuation to control the current equilibrium configuration is derived. Changing between selected equilibrium states enables a great difference in potential energy, which yields a jumping motion of the structure. Based on numerical simulations a suitable actuation strategy is chosen to overcome obstacle and steps by jumping forward or backward, respectively. The theoretical approach is examined experimentally with a prototype of the multistable tensegrity structure. (c) 2020 Elsevier Ltd. All rights reserved. All known locomotion principles are limited respective to environmental conditions. Often, the occurrence of obstacles or gaps means the break-off for the operating motion systems. For such circumstances, a controllable jumping locomotion is required to cross these barriers. However, this locomotion demands sophisticated requirements to the actuation. The abrupt actuation is commonly realized by high dynamic actuators or complex mechanisms. In this work, a simple solution utilizing the multistability of a compliant tensegrity structure is described. Therefore, a two-dimensional tensegrity structure featuring four stable equilibria is considered. Based on bifurcation analyses a feasible actuation to control the current equilibrium configuration is derived. Changing between selected equilibrium states enables a great difference in potential energy, which yields a jumping motion of the structure. Based on numerical simulations a suitable actuation strategy is chosen to overcome obstacle and steps by jumping forward or backward, respectively. The theoretical approach is examined experimentally with a prototype of the multistable tensegrity structure.}, language = {en} } @article{SchorrBoehmZentneretal., author = {Schorr, Philipp and B{\"o}hm, Valter and Zentner, Lena and Zimmermann, Klaus}, title = {Motion characteristics of a vibration driven mobile tensegrity structure with multiple stable equilibrium states}, series = {Journal of Sound and Vibration}, volume = {437}, journal = {Journal of Sound and Vibration}, number = {December}, publisher = {Elsevier}, doi = {10.1016/j.jsv.2018.09.019}, pages = {198 -- 208}, abstract = {A novel type of a vibration driven motion system based on a compliant tensegrity structure with multiple stable equilibrium states is considered. These equilibrium configurations correspond to different prestress states with different dynamical properties. Therefore, the motion characteristics can be varied by changing the equilibrium state. For the application in the fields of mobile robotics, these discrete adjustable dynamics are advantageous. The vibration modes of the structure as well as the corresponding motion characteristics of the system can be adapted to the given environmental conditions in order to ensure a reliable motion. In this paper, dynamical investigations of an exemplary two-dimensional multistable tensegrity structure are considered. For the chosen parameter values the structure features two relevant equilibrium configurations. The resulting motion system is in contact to a horizontal plane due to gravity and the actuation is realized by the harmonic variation of the length of a single tensioned member. The motion of the system is simulated for various actuation frequencies with the different equilibrium states as an initial configuration. A uniaxial or a planar movement occurs depending on the selection of the actuated member within the tensegrity structure. The steady state motion is evaluated regarding motion characteristics like the steady state velocity. Moreover, the influences on the motion behavior caused by the different equilibrium states as an initial condition are emphasized. (C) 2018 Elsevier Ltd. All rights reserved.}, language = {en} } @article{ChavezVegaBoehmBeckeretal., author = {Chavez Vega, Jhohan Harvey and B{\"o}hm, Valter and Becker, Tatiana I. and Gast, Simon and Zeidis, Igor and Zimmermann, Klaus}, title = {Actuators based on a controlled particle-matrix interaction in magnetic hybrid materials for applications in locomotion and manipulation systems}, series = {Physical Sciences Reviews}, volume = {7}, journal = {Physical Sciences Reviews}, number = {11}, publisher = {de Gruyter}, doi = {10.1515/psr-2019-0087}, pages = {1263 -- 1290}, abstract = {The paper deals with the investigation of magneto-sensitive elastomers (MSE) and their application in technical actuator systems. MSE consist of an elastic matrix containing suspended magnetically soft and/or hard particles. Additionally, they can also contain silicone oil, graphite particles, thermoplastic components, etc., in various concentrations in order to tune specific properties such as viscosity, conductivity and thermoelasticity, respectively. The focuses of investigations are the beneficial properties of MSE in prototypes for locomotion and manipulation purposes that possess an integrated sensor function. The research follows the principle of a model-based design, i.e. the working steps are ideation, mathematical modelling, material characterization as well as building first functional models (prototypes). The developed apedal (without legs) and non-wheeled locomotion systems use the interplay between material deformations and the mechanical motion in connection with the issues of control and stability. Non-linear friction phenomena lead to a monotonous forward motion of the systems. The aim of this study is the design of such mechanical structures, which reduce the control costs. The investigations deal with the movement and control of 'intelligent' mechanisms, for which the magnetically field-controlled particle-matrix interactions provide an appropriate approach. The presented grippers enclose partially gripped objects, which is an advantage for handling sensitive objects. Form-fit grippers with adaptable contour at the contact area enable a uniform pressure distribution on the surface of gripped objects. Furthermore, with the possibility of active shape adaptation, objects with significantly differing geometries can be gripped. To realise the desired active shape adaptation, the effect of field-induced plasticity of MSE is used. The first developed prototypes mainly confirm the functional principles as such without direct application. For this, besides the ability of locomotion and manipulation itself, further technological possibilities have to be added to the systems. The first steps are therefore being taken towards integrated MSE based adaptive sensor systems.}, language = {en} } @article{ChavezVegaSchorrKaufholdetal., author = {Chavez Vega, Jhohan Harvey and Schorr, Philipp and Kaufhold, Tobias and Zentner, Lena and Zimmermann, Klaus and B{\"o}hm, Valter}, title = {Influence of Elastomeric Tensioned Members on the Characteristics of Compliant Tensegrity Structures in Soft Robotic Applications}, series = {Procedia Manufacturing}, volume = {52}, journal = {Procedia Manufacturing}, publisher = {Elsevier}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.11.048}, pages = {289 -- 294}, abstract = {The use of mechanically prestressed compliant structures in soft robotics is a recently discussed topic. Tensegrity structures, consisting of a set of rigid disconnected compressed members connected to a continuous net of prestressed elastic tensioned members build one specific class of these structures. Robots based on these structures have manifold shape changing abilities and can adapt their mechanical properties reversibly by changing of their prestress state according to specific tasks. In the paper selected aspects on the potential use of elastomer materials in these structures are discussed with the help of theoretical analysis. Therefore, a selected basic tensegrity structure with elastomer members is investigated focusing on the stiffness and shape changing ability in dependence of the nonlinear hyperelastic behavior of the used elastomer materials. The considered structure is compared with a conventional tensegrity structure with linear elastic tensioned members. Finally, selected criterions for the advantageous use of elastomer materials in compliant tensegrity robots are discussed.}, language = {en} } @article{SchorrChavezVegaZentneretal., author = {Schorr, Philipp and Chavez Vega, Jhohan Harvey and Zentner, Lena and B{\"o}hm, Valter}, title = {Reconfiguration of planar quadrilateral linkages utilizing the tensegrity principle}, series = {Mechanism and machine theory}, journal = {Mechanism and machine theory}, number = {156}, publisher = {Elsevier}, doi = {10.1016/j.mechmachtheory.2020.104172}, abstract = {The development of reconfigurable planar four-bar linkages by applying the tensegrity principle is considered. Conventional quadrilateral linkages enable two operation modes differing in the kinematic behavior. However, a change between these states is not possible due to the geometric constraints. To enable a reconfiguration between the different modes one-sided limited nonholonomic constraints are introduced in this work. This issue is realized by applying ropes that cannot resist compression. However, to guarantee an appropriate load case in operation a prestress within the mechanism is required. Hence, the linkage is extended to a tensegrity-based mechanism. The structural dynamics are derived using the LAGRANGE formalism and the structural behavior is evaluated using numerical simulations. Furthermore, a prototype of an exemplary tensegrity-based mechanism is manufactured and experiments regarding the mechanical properties, in particular the reconfiguration, are performed. The results suggest the potential benefit of applying the tensegrity principle within conventional planar four-bar linkages.}, language = {en} } @article{ChavezVegaZiolkowskiSchorretal., author = {Chavez Vega, Jhohan Harvey and Ziolkowski, Marek and Schorr, Philipp and Spiess, Lothar and B{\"o}hm, Valter and Zimmermann, Klaus}, title = {A method to approach constant isotropic permeabilities and demagnetization factors of magneto-rheological elastomers}, series = {Journal of Magnetism and Magnetic Materials}, volume = {527}, journal = {Journal of Magnetism and Magnetic Materials}, publisher = {Elsevier}, doi = {10.1016/j.jmmm.2021.167742}, abstract = {The use of non-conventional materials is nowadays of much interest in scientific community. Magneto-rheological elastomers are hybrid materials, which in presence of magnetic fields state a change in their mechanical properties. They are composed by an elastomeric matrix with embedded magnetic particles. One of the most attractive features of these materials is that as soon as the magnetic field is removed from the material, the original mechanical properties are completely recovered, with negligible differences in comparison to the original state. This paper focuses on the study of magnetic characteristics of these smart materials, such as relative permeability and demagnetizing factors, for samples with different volume concentration of ferromagnetic particles.}, language = {en} } @article{BeckerBoehmChavezVegaetal., author = {Becker, Tatiana I. and B{\"o}hm, Valter and Chavez Vega, Jhohan Harvey and Odenbach, Stefan and Raikher, Yuriy L. and Zimmermann, Klaus}, title = {Magnetic-field-controlled mechanical behavior of magneto-sensitive elastomers in applications for actuator and sensor systems}, series = {Archive of Applied Mechanics}, volume = {89}, journal = {Archive of Applied Mechanics}, number = {1}, publisher = {Springer Nature}, doi = {10.1007/s00419-018-1477-4}, pages = {133 -- 152}, abstract = {The development of actuator and sensor systems with complex adaptive behavior and operating sensitivity is one of the actual scientific challenges. Smart materials like magneto-sensitive elastomers (MSEs) offer great potential for designing such intelligent devices, because they possess unique magnetic-field-dependent properties. The present paper deals with investigations of the free and forced vibrational behavior displayed by cantilever beams of MSEs containing magnetically soft particles in a uniform magnetic field. It is shown experimentally as well as theoretically that the first bending eigenfrequency of MSE beams depends strongly on the strength of an applied magnetic field. The proposed magneto-mechanical model is based on the vibrational dynamics of thin rods and predicts reliably the amplitude-frequency characteristics depending on the geometric configuration of the MSE and its material parameters. It is found that the vibration response of an MSE beam under kinematic excitation of its base can be modified indirectly by a magnetic field control due to the change of the vibration characteristics. As a result, the resonance can occur in different ranges of the excitation frequency. The dependencies of the amplification ratio on the excitation frequency are obtained experimentally and compared with the result provided by the theoretical model. Moreover, investigations on the potential use of the field-induced plasticity effect of MSEs in form-fit gripper applications are presented. This effect can be used to realize shape adaptable system parts. It is found that the mechanical properties of each component and its concentration within the mixture have an impact on the mechanical behavior of the whole MSE compound. Such parameters as the strength of magnetic field and geometry of the MSE sample have influence on the quality of shape adaptation. The evidence presented provides a good basis for the realization of MSE-based actuator and sensor systems with adaptable sensitivity.}, language = {en} } @article{PremChavezVegaBoehmetal., author = {Prem, Nina and Chavez Vega, Jhohan Harvey and B{\"o}hm, Valter and Sindersberger, Dirk and Monkman, Gareth J. and Zimmermann, Klaus}, title = {Properties of Polydimethylsiloxane and Magnetoactive Polymers with Electroconductive Particles}, series = {Macromolecular Chemistry and Physics}, volume = {219}, journal = {Macromolecular Chemistry and Physics}, number = {18}, publisher = {Wiley}, doi = {10.1002/macp.201800222}, abstract = {Magnetoactive polymers are intelligent materials whose mechanical and electrical characteristics are reversibly influenced by external magnetic stimuli. They consist of a highly elastic polymer matrix in which magnetically soft and/or hard particles are distributed by means of special fabrication processes. In addition to ferromagnetic particles such as carbonyl iron powder, electrically conductive particles may also be embedded into the polymer matrix. After characterizing a range of compounds, this work focuses on a comparison of the electrical properties and the suitability of various materials for applications, with particular emphasis on integration into 3D and 6D printing processes. 6D printing is based on the selective positioning of particles in a 3D polymer matrix with a further three degrees of freedom for a graduated dispersion of the particles at certain points and in desired directions. The aim is therefore to ensure that the polymers containing electroconductive tracks have the best possible electrical properties, that is, low resistivity but are still capable of being printed. A comparison between the traditionally used compounds containing graphite and carbon black is made for the first time. This latter is found to be greatly superior both in terms of electrical conductivity and applicability to 3D printing and 6D printing.}, language = {en} } @article{SchaefferHerrmannSchmausseretal., author = {Schaeffer, Leon and Herrmann, David and Schmausser, Theresa and Liebrecht, Melanie and Rambach, Felix and B{\"o}hm, Valter}, title = {Theoretische Untersuchungen zu einer neuartigen Handorthese : [Kurzfassung des Tagungsbeitrags]}, series = {10. IFToMM D-A-CH Konferenz 2024: 05./06. M{\"a}rz 2024, Universit{\"a}t Rostock.}, journal = {10. IFToMM D-A-CH Konferenz 2024: 05./06. M{\"a}rz 2024, Universit{\"a}t Rostock.}, doi = {10.17185/duepublico/81586}, language = {de} } @article{SchuemannMorichKaufholdetal., author = {Sch{\"u}mann, Malte and Morich, J. and Kaufhold, Tobias and B{\"o}hm, Valter and Zimmermann, Klaus and Odenbach, Stefan}, title = {A mechanical characterisation on multiple timescales of electroconductive magnetorheological elastomers}, series = {Magnetism and Magnetic Materials}, volume = {453}, journal = {Magnetism and Magnetic Materials}, number = {May}, publisher = {Elsevier}, doi = {10.1016/j.jmmm.2018.01.029}, pages = {198 -- 205}, abstract = {Magnetorheological elastomers are a type of smart hybrid material which combines elastic properties of a soft elastomer matrix with magnetic properties of magnetic micro particles. This leads to a material with magnetically controllable mechanical properties of which the magnetorheological effect is the best known. The addition of electroconductive particles to the polymer mix adds electrical properties to the material behaviour. The resulting electrical resistance of the sample can be manipulated by external magnetic fields and mechanical loads. This results in a distinct interplay of mechanical, electrical and magnetic effects with a highly complex time behaviour. In this paper a mechanical characterisation on multiple time scales was conducted to get an insight on the short and long-term electrical and mechanical behaviour of this novel material. The results show a complex resistivity behaviour on several timescales, sensitive to magnetic fields and strain velocity. The observed material exhibits fatigue and relaxation behaviour, whereas the magnetorheological effect appears not to interfere with the piezoresistive properties.}, language = {en} } @article{ZimmermannBoehmBeckerTIetal., author = {Zimmermann, Klaus and B{\"o}hm, Valter and Becker T.I., and Chavez Vega, Jhohan Harvey and Kaufhold, Tobias and Monkman, Gareth J. and Sindersberger, Dirk and Diermeier, Andreas and Prem, Nina}, title = {Mechanical Characterization of the Field-Dependent Properties of Magnetoactive Polymers and Integrated Electrets for their Application in Soft Robotics}, series = {International Scientific Journal "Problems of Mechanics"}, volume = {69}, journal = {International Scientific Journal "Problems of Mechanics"}, number = {4}, issn = {1512-0740}, language = {en} } @article{ZimmermannChavezVegaBeckeretal., author = {Zimmermann, Klaus and Chavez Vega, Jhohan Harvey and Becker, Tatiana I. and Witte, Hartmut and Schilling, Cornelius and K{\"o}hring, Sebastian and B{\"o}hm, Valter and Monkman, Gareth J. and Prem, Nina and Sindersberger, Dirk and Lutz, I. I. and Merker, Lukas}, title = {An approach to a form-adaptive compliant gripper element based on magneto-sensitive elastomers with a bioinspired sensorized surface}, series = {Problems of Mechanics}, volume = {75}, journal = {Problems of Mechanics}, number = {2}, publisher = {Georgian Technical University}, address = {Tbilisi}, issn = {1512-0740}, pages = {23 -- 38}, language = {en} } @article{JahnBoehmZentner, author = {Jahn, Hannes and B{\"o}hm, Valter and Zentner, Lena}, title = {Analysis of deformation in tensegrity structures with curved compressed members}, series = {Meccanica}, journal = {Meccanica}, publisher = {Springer Nature}, issn = {0025-6455}, doi = {10.1007/s11012-024-01833-y}, pages = {12}, abstract = {AbstractTensegrity structures are prestressed structures consisting of compressed members connected by prestressed tensioned members. Due to their properties, such as flexibility and lightness, mobile robots based on these structures are an attractive subject of research and are suitable for space applications. In this work, a mobile robot based on a tensegrity structure with two curved members connected by eight tensioned strings is analyzed in terms of deformation in the curved members. Further, the difference in locomotion trajectory between the undeformed and deformed structure after the prestress is analyzed. For that, the theory of large deflections of rod-like structures is used. To determine the relationship between acting forces and the deformation, the structure is optimized using minimization algorithms in Python. The results are validated by parameter studies in FEM. The analysis shows that the distance between the two curved members significantly influences the structure's locomotion. It can be said that the deformation of the components significantly influences the locomotion of tensegrity structures and should be considered when analyzing highly compliant structures.}, language = {en} } @article{BeckerBoehmSchaleetal., author = {Becker, Tatiana I. and B{\"o}hm, Valter and Schale, Florian and Zimmermann, Klaus}, title = {Vibrating sensor unit made of a magnetoactive elastomer with field-adjustable characteristics}, series = {Journal of Magnetism and Magnetic Materials}, volume = {498}, journal = {Journal of Magnetism and Magnetic Materials}, number = {March}, publisher = {Elsevier}, doi = {10.1016/j.jmmm.2019.166196}, abstract = {The present work deals with the investigation of the oscillatory behavior displayed by a vibrating sensor unit made of a magnetoactive elastomer (MAE). Since this type of smart materials consists of an elastic matrix and micro-magnetic particles, it reveals exceptional magnetic-field-dependent material properties. The forced vibration response under the bending of the MAE unit subjected to in-plane harmonic kinematic excitation of the housing is studied. It is found that the amplitude-frequency characteristics of the MAE unit can be changed considerably by means of an external homogeneous magnetic field. With and without applied field, the unit displays different steady-state responses for the same excitation, and the resonance occurs at various ranges of the excitation frequency. The nonlinear phenomenon of the resonance hysteresis is observed depending on whether the excitation frequency increases or decreases. It is shown that the MAE vibrations can be detected based on the magnetic field distortion measurements. The presented prototype of the MAE-based vibrating unit with field-adjustable "configuration" can be potentially implemented for realization of acceleration sensor systems with adaptive sensitivity.}, language = {en} } @article{SchaefferHerrmannSchratzenstalleretal., author = {Schaeffer, Leon and Herrmann, David and Schratzenstaller, Thomas and Dendorfer, Sebastian and B{\"o}hm, Valter}, title = {Theoretical considerations on stiffness characteristics of a 3-dimensional tensegrity joint model for the use in dynamic hand orthoses}, series = {Journal of Medical Robotics Research}, journal = {Journal of Medical Robotics Research}, publisher = {World Scientific}, doi = {10.1142/S2424905X25400069}, language = {en} }