@article{MelznerEngelhardtSimonetal., author = {Melzner, Maximilian and Engelhardt, Lucas and Simon, Ulrich and Dendorfer, Sebastian}, title = {Electromyography-Based Validation of a Musculoskeletal Hand Model}, series = {Journal of Biomechanical Engineering}, volume = {144}, journal = {Journal of Biomechanical Engineering}, number = {2}, publisher = {American Society of Mechanical Engineers, ASME}, doi = {10.1115/1.4052115}, pages = {8}, abstract = {Regarding the prevention of injuries and rehabilitation of the human hand, musculoskeletal simulations using an inverse dynamics approach allow for insights of the muscle recruitment and thus acting forces on the hand. Currently, several hand models from various research groups are in use, which are mainly validated by the comparison of numerical and anatomical moment arms. In contrast to this validation and model-building technique by cadaver studies, the aim of this study is to further validate a recently published hand model [1] by analyzing numerically calculated muscle activities in comparison to experimentally measured electromyographical signals of the muscles. Therefore, the electromyographical signals of 10 hand muscles of five test subjects performing seven different hand movements were measured. The kinematics of these tasks were used as input for the hand model, and the numerical muscle activities were computed. To analyze the relationship between simulated and measured activities, the time difference of the muscle on- and off-set points was calculated, which resulted in a mean on- and off-set time difference of 0.58 s between the experimental data and the model. The largest differences were detected for movements that mainly addressed the wrist. One major issue comparing simulated and measured muscle activities of the hand is cross-talk. Nevertheless, the results show that the hand model fits the experiment quite accurately despite some limitations and is a further step toward patient-specific modeling of the upper extremity.}, subject = {Elektromyographie}, language = {en} } @inproceedings{HaimerlTschernitzSchilleretal., author = {Haimerl, Simon and Tschernitz, Christoph and Schiller, Tobias and Weig, Christoph and Briem, Ulrich and Galka, Stefan}, title = {Development of a Simulation Framework for Urban Ropeway Systems and Analysis of the Planned Ropeway Network in Regensburg, Germany}, series = {Proceedings of the 2022 Winter Simulation Conference (WSC), 11-14 Dec. 2022, Singapore}, booktitle = {Proceedings of the 2022 Winter Simulation Conference (WSC), 11-14 Dec. 2022, Singapore}, publisher = {IEEE}, isbn = {978-1-6654-7661-4}, doi = {10.1109/WSC57314.2022.10015510}, pages = {1413 -- 1424}, abstract = {To evaluate the performance of a ropeway in an urban environment, simulations of the dynamic passenger transport characteristics are required. Therefore, a modular simulation model for urban ropeway networks was developed, which can be flexibly adapted to any city and passenger volume. This simulation model was used to analyze the ropeway network concept of the German city Regensburg and to determine the expected operating conditions. The passenger volume, different types of persons, their occurrence probability and their destination distribution is depending on the location and daytime and can be defined for each individual station. In an initial analysis, the number of passengers currently occurring in bus traffic were projected onto the ropeway network. To enable climate-friendly and efficient operation, different strategies were developed to significantly reduce the number of gondolas. The best fitting strategies resulted in significant cost savings while passenger comfort, as represented by queue time, remained unchanged.}, language = {en} }