@misc{SchudererRillSchulzetal., author = {Schuderer, Matthias and Rill, Georg and Schulz, Carsten and Schaeffer, Thomas}, title = {Dynamic Stick-Slip Models based on Continuous and Discontinuous Friction Characteristics}, series = {ENOC - European Nonlinear Dynamics Conference, 11th, 2024, Delft}, journal = {ENOC - European Nonlinear Dynamics Conference, 11th, 2024, Delft}, doi = {10.2139/ssrn.5014569}, pages = {17}, abstract = {This paper presents the implementation of a recently developed continuous second-order dynamic friction model (FrD2) in the commercial multibody system software Simpack, where it is evaluated against Simpack's discontinuous friction model for stick-slip applications in terms of performance. A method for adapting parameters from the well-known LuGre model to the FrD2 model is introduced. The FrD2 model accurately captures complex friction phenomena, including the Stribeck effect, which is essential for simulating friction-induced vibrations. Tested on a festoon cable system and a belt model, the FrD2 model demonstrates itself as a robust alternative to both the LuGre and Simpack models, especially for applications requiring continuous transitions between static and dynamic friction states, long-term stiction effects, and other complex friction behaviors.}, language = {en} } @article{SchaefferHerrmannSchratzenstalleretal., author = {Schaeffer, Leon and Herrmann, David and Schratzenstaller, Thomas and Dendorfer, Sebastian and B{\"o}hm, Valter}, title = {Theoretical considerations on stiffness characteristics of a 3-dimensional tensegrity joint model for the use in dynamic hand orthoses}, series = {Journal of Medical Robotics Research}, journal = {Journal of Medical Robotics Research}, publisher = {World Scientific}, doi = {10.1142/S2424905X25400069}, language = {en} } @misc{SchudererRillSchaefferetal., author = {Schuderer, Matthias and Rill, Georg and Schaeffer, Thomas and Schulz, Carsten}, title = {Friction modeling from a practical point of view}, series = {MULTIBODY2023: 11th ECCOMAS Thematic Conference on Multibody Dynamics, Tampa, 24th-28th May 2023}, journal = {MULTIBODY2023: 11th ECCOMAS Thematic Conference on Multibody Dynamics, Tampa, 24th-28th May 2023}, language = {en} } @article{VoglSchulzSchaefferetal., author = {Vogl, Yannick and Schulz, Carsten and Schaeffer, Thomas and Geiger, Benjamin}, title = {Prediction of the wear behavior of a conveyor belt with flexible rollers}, series = {Multibody System Dynamics}, journal = {Multibody System Dynamics}, publisher = {Springer}, address = {Cham}, issn = {1384-5640}, doi = {10.1007/s11044-025-10097-7}, pages = {16}, abstract = {This paper introduces a method to predict wear behavior in conveyor belt systems using a lumped mass modeling approach. While previous research has focused primarily on lateral belt walking, this study shifts attention to belt deformation and its associated wear. Both significantly affect system efficiency and component lifespan. The authors propose using local frictional power as a wear indicator, leveraging its direct relation to frictional work in established wear models. To solely demonstrate the method, the study simulates a conveyor belt with three flexible rollers and a deformable belt modeled through rigid spheres connected by spring-damper elements. The authors visualize frictional power density across the belt width, distinguishing between running and transverse directions. The results demonstrate that the frictional power distribution depends heavily on discretization quality, particularly due to the polygon effect inherent in the lumped mass approach. A convergence analysis reveals the minimum necessary discretization of the belt, ensuring reliable qualitative results. To support the credibility of the work, this study compares theoretical expectations and initial wear observations from a real belt with the results from the shown approach. The plausibility check already shows promising results. The proposed methodology provides an adaptable framework to evaluate wear in belt-like structures. It can be readily adapted to a variety of multibody dynamics applications and integrated into larger MBS models that include the overall drivetrain and engine control. Future work will focus on refining discretization strategies and contact models, as well as validation of the wear model to enable quantitative predictions.}, language = {en} } @unpublished{VoglSchulzSchaefferetal., author = {Vogl, Yannick and Schulz, Carsten and Schaeffer, Thomas and Geiger, Benjamin}, title = {Prediction of the wear behavior of a conveyor belt with flexible rollers}, publisher = {Research Square Platform LLC}, doi = {10.21203/rs.3.rs-6343500/v1}, pages = {17 Seiten}, abstract = {This paper introduces a method to predict wear behavior in conveyor belt systems using a lumped mass modeling approach. While previous research has focused primarily on lateral belt walking, this study shifts attention to belt deformation and its associated wear. Both significantly affect system efficiency and component lifespan. The authors propose using local frictional power as a wear indicator, leveraging its direct relation to frictional work in established wear models. To validate the method, the study simulates a conveyor belt with three flexible rollers and a deformable belt modeled through rigid spheres connected by spring-damper elements. The authors quantify and visualize frictional power density across the belt width, distinguishing between running and transverse directions. The results demonstrate that the frictional power distribution depends heavily on discretization quality, particularly due to the polygon effect inherent in the lumped mass approach. A convergence analysis reveals a minimum discretization of nine sphere rows with 557 spheres per row to achieve reliable qualitative insights. This method enables researchers to evaluate wear distribution in flexible conveyor systems and adapt the approach for broader applications in multibody dynamics. Future work should refine discretization techniques and friction models to enhance quantitative accuracy.}, language = {en} }