@article{SchulzVoglGeigeretal., author = {Schulz, Carsten and Vogl, Yannick and Geiger, Benjamin and Schaeffer, Thomas}, title = {Vor- und Nachteile einer Lumped-Mass-Modellierung von F{\"o}rderb{\"a}ndern am Beispiel eines Zwei-Walzensystems}, series = {Forschung im Ingenieurwesen}, volume = {88}, journal = {Forschung im Ingenieurwesen}, number = {1}, publisher = {Springer Vieweg}, address = {Belrin ; Heidelberg}, issn = {0015-7899}, doi = {10.1007/s10010-024-00736-4}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-72891}, pages = {9}, abstract = {Im Betrieb von F{\"o}rderb{\"a}ndern auftretende Ph{\"a}nomene sind das Bandwandern in Achsrichtung der Walzen und die Bandverformung in der Bandebene [1, S. 142]. Das Bandwandern ist bisher detailliert untersucht [2-4], w{\"a}hrend die Bandverformung Gegenstand weniger Ver{\"o}ffentlichungen ist. Deshalb wird in diesem Artikel eine Methode zur Berechnung der sich im dynamischen Betrieb einstellenden Verformung eines elastischen F{\"o}rderbandes vorgestellt. Dazu wird ein Mehrk{\"o}rpersimulations-Modell basierend auf der Lumped-Mass-Modellierung verwendet. Als Untersuchungsbeispiel dient ein Zwei-Walzensystem mit flexiblen und zylindrischen Walzen, sowie ein flexibles F{\"o}rderband. Es zeigt sich, dass mit der Lumped-Mass-Modellierung eine dynamische Bandverformung, die von der gew{\"a}hlten Diskretisierung abh{\"a}ngt, berechnet werden kann. Aufgrund dieser Abh{\"a}ngigkeit ist es notwendig eine Konvergenzanalyse durchzuf{\"u}hren. Zus{\"a}tzlich ist darauf zu achten, dass die k{\"u}nstliche Anregung aufgrund der Lumped-Mass-Modellierung nicht mit einer Eigenfrequenz des Modells zusammenf{\"a}llt.}, language = {de} } @article{SchudererRillSchaefferetal., author = {Schuderer, Matthias and Rill, Georg and Schaeffer, Thomas and Schulz, Carsten}, title = {Friction modeling from a practical point of view}, series = {Multibody System Dynamics}, journal = {Multibody System Dynamics}, publisher = {Springernature}, issn = {1384-5640}, doi = {10.1007/s11044-024-09978-0}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-72513}, pages = {18}, abstract = {AbstractRegularized static friction models have been used successfully for many years. However, they are unable to maintain static friction in detail. For this reason, dynamic friction models have been developed and published in the literature. However, commercial multibody simulation packages such as Adams, RecurDyn, and Simpack have developed their own specific stick-slip models instead of adopting one of the public domain approaches. This article introduces the fundamentals of these commercial models and their behavior from a practical point of view. The stick-slip models were applied to a simple test model and a more sophisticated model of a festoon cable system using their standard parameters.}, language = {en} } @inproceedings{SchulzVoglGeigeretal., author = {Schulz, Carsten and Vogl, Yannick and Geiger, Benjamin and Schaeffer, Thomas}, title = {Lumped-Mass-Modellierung von F{\"o}rderb{\"a}ndern am Beispiel eines Zwei-Walzensystems mit flexiblen Walzen}, series = {Dresdner Maschinenelemente Kolloquium - DMK 2024, 14.-15. Mai 2024, Dresden}, booktitle = {Dresdner Maschinenelemente Kolloquium - DMK 2024, 14.-15. Mai 2024, Dresden}, language = {de} } @misc{SchudererRillSchulzetal., author = {Schuderer, Matthias and Rill, Georg and Schulz, Carsten and Schaeffer, Thomas}, title = {Dynamic Stick-Slip Models based on Continuous and Discontinuous Friction Characteristics}, series = {ENOC - European Nonlinear Dynamics Conference, 11th, 2024, Delft}, journal = {ENOC - European Nonlinear Dynamics Conference, 11th, 2024, Delft}, doi = {10.2139/ssrn.5014569}, pages = {17}, abstract = {This paper presents the implementation of a recently developed continuous second-order dynamic friction model (FrD2) in the commercial multibody system software Simpack, where it is evaluated against Simpack's discontinuous friction model for stick-slip applications in terms of performance. A method for adapting parameters from the well-known LuGre model to the FrD2 model is introduced. The FrD2 model accurately captures complex friction phenomena, including the Stribeck effect, which is essential for simulating friction-induced vibrations. Tested on a festoon cable system and a belt model, the FrD2 model demonstrates itself as a robust alternative to both the LuGre and Simpack models, especially for applications requiring continuous transitions between static and dynamic friction states, long-term stiction effects, and other complex friction behaviors.}, language = {en} }