@inproceedings{RothHauslerBierl, author = {Roth, Carina and Hausler, Peter and Bierl, Rudolf}, title = {Einbindung eines CMOS-Detektors in einen hochintegrierten SPR-Sensor}, series = {5. Landshuter Symposium Mikrosystemtechnik, M{\"a}rz 2016}, booktitle = {5. Landshuter Symposium Mikrosystemtechnik, M{\"a}rz 2016}, publisher = {Fachhochschule Landshut}, address = {Landshut}, isbn = {78-3-9812696-9-7}, pages = {200 -- 205}, language = {de} } @article{RomanoMicklitzOlbrichetal., author = {Romano, Marco and Micklitz, Matthias and Olbrich, Florian and Bierl, Rudolf and Ehrlich, Ingo and Gebbeken, Norbert}, title = {Experimental investigation of damping properties of unidirectionally and fabric reinforced plastics by the free decay method}, series = {Journal of Achievements in Materials and Manufacturing Engineering}, volume = {63}, journal = {Journal of Achievements in Materials and Manufacturing Engineering}, number = {2}, pages = {65 -- 80}, abstract = {Purpose: of this paper is experimental investigation of damping properties of unidirectionally and fabric reinforced plastics by the free decay method. Design/methodology/approach: For the evaluation of the presumed effect experimental structural dynamic investigations comparing unidirectionally and fabric reinforced plastics are carried out. In detail the free decay behaviour of flat beamlike specimens under fixed-free boundary conditions and relatively constant and reproducible displacement excitation is investigated. Findings: The vibrating structure has been measured by a laser scanning vibrometer PSV 400 from POLYTEC. In both cases evaluation of the results yields enhanced damping properties of the specimens with fabric reinforcement compared to the unidirectionally reinforced specimens. The results justify the presumed acting of a mesomechanic kinematic. Research limitations/implications: The results show that in either case the material damping in terms of the logarithmic decrement of the fabric reinforced material is higher than the material damping in of the unidirectionally reinforced material. Additionally, when the fabric reinforced specimens are addressed, in each case the plain weave reinforced specimens exhibited higher values of the material damping as the twill weave 2/2 reinforced ones. Originality/value: Ondulations in fabrics as a textile semi-finished product are caused by the alternating crossing of warp and fill yarns. In the mesoscopic scale the acting of a mesomechanic kinematic is presumed to enhance the damping properties under cyclic elastic deformation. For the evaluation of the presumed effect experimental structural dynamic investigations comparing unidirectionally and fabric reinforced plastics are carried out.}, language = {en} } @inproceedings{JobstBierl, author = {Jobst, Simon and Bierl, Rudolf}, title = {A Comparison of Correlation and Zero-Crossing Based Techniques in Ultrasonic Measurement}, series = {10th International Symposium on Applied Reconfigurable Computing (ARC'2014), Vilamoura, Algarve, Portugal, 14 - 16 April, 2014}, booktitle = {10th International Symposium on Applied Reconfigurable Computing (ARC'2014), Vilamoura, Algarve, Portugal, 14 - 16 April, 2014}, abstract = {Ultrasound measurement technology has advancedin previous decades due to positive developments in computing power and lower cost for the necessary hardware. Correlation-based processing can be advantageous for high-accuracy measurements, especially in noisy environments. Higher computational load makes correlation less attractive for industrialapplications, though, favouring traditional processing techniques. A platform for comparing various processing techniques hasbeen developed. It was found that both zero-crossing detectionas well as correlation can achieve very high accuracy over a hightemperature range but that correlation-based processing can lead to a significant precision bias depending on system bandwidth.}, language = {en} } @inproceedings{HofmannBierlRueck, author = {Hofmann, Matthias and Bierl, Rudolf and R{\"u}ck, Thomas}, title = {Implementation of a dual-phase lock-in amplifier on a TMS320C5515 digital signal processor}, series = {Proceedings of the 5th European DSP Education and Research Conference (EDERC), 13-14 Sept. 2012, Amsterdam}, booktitle = {Proceedings of the 5th European DSP Education and Research Conference (EDERC), 13-14 Sept. 2012, Amsterdam}, doi = {10.1109/EDERC.2012.6532217}, abstract = {A digital dual-phase lock-in amplifier that is capable to run on a low-cost, low-power platform comprising a 16-bit fixed-point digital signal processor was developed. This is achieved by a set of optimised digital filters including an exponential averager to adjust the time constant of the overall filter. The reference frequency is generated using a direct digital synthesis source utilising angle decomposition with a resolution of 1 Hz. The digital lock-in algorithm is described and the performance of the algorithm is analysed. The experimental results show that the developed lock-in amplifier achieves similar performance to a commercially available lock-in amplifier.}, language = {en} } @inproceedings{RueckLandgrafLaeppleetal., author = {R{\"u}ck, Thomas and Landgraf, Ferdinand and L{\"a}pple, I. and Unger, J. and Matysik, Frank-Michael and Bierl, Rudolf}, title = {Specification of an improved photoacoustic setup for high-sensitive, low-cost NO2 trace gas detection}, series = {18th International Conference on Photoacoustic and Photothermal Phenomena (ICPPP18), 2015, September 6-10, Novi Sad, Serbia}, booktitle = {18th International Conference on Photoacoustic and Photothermal Phenomena (ICPPP18), 2015, September 6-10, Novi Sad, Serbia}, language = {en} } @inproceedings{vanderWeerdBierlMatysik, author = {van der Weerd, Bastiaan and Bierl, Rudolf and Matysik, Frank-Michael}, title = {A Conductivity Probe for the Determination of Carbon Dioxide Tension at the Oxygenator Exhaust Outlet during Extracorporeal Membrane Oxygenation (ECMO)}, series = {analytica Conference 2014, 1. bis 4. April, M{\"u}nchen}, booktitle = {analytica Conference 2014, 1. bis 4. April, M{\"u}nchen}, language = {en} } @inproceedings{vanderWeerdBierlMatysik, author = {van der Weerd, Bastiaan and Bierl, Rudolf and Matysik, Frank-Michael}, title = {A Conductivity Probe for the Determination of Carbon Dioxide Tension at the Oxygenator Exhaust Outlet during Extracorporeal Membrane Oxygenation (ECMO)}, series = {Electrochemistry 2014, September 22 - 24, Mainz}, booktitle = {Electrochemistry 2014, September 22 - 24, Mainz}, language = {en} } @inproceedings{vanderWeerdBierlMatysik, author = {van der Weerd, Bastiaan and Bierl, Rudolf and Matysik, Frank-Michael}, title = {A Planar Conductivity Probe for CO2 Determination at the Oxygenator Outlet}, series = {Doktorandenseminar GDCh Prozessanalytik 2014, Berlin}, booktitle = {Doktorandenseminar GDCh Prozessanalytik 2014, Berlin}, language = {en} } @article{WunderlichHauslerMaerkletal., author = {Wunderlich, Lukas and Hausler, Peter and Maerkl, Susanne and Bierl, Rudolf and Hirsch, Thomas}, title = {Nanoparticle Determination in Water by LED-Excited Surface Plasmon Resonance Imaging}, series = {Chemosensors}, volume = {9}, journal = {Chemosensors}, number = {7}, publisher = {MDPI}, issn = {2227-9040}, doi = {10.3390/chemosensors9070175}, pages = {1 -- 9}, abstract = {The increasing popularity of nanoparticles in many applications has led to the fact that these persistent materials pollute our environment and threaten our health. An online sensor system for monitoring the presence of nanoparticles in fresh water would be highly desired. We propose a label-free sensor based on SPR imaging. The sensitivity was enhanced by a factor of about 100 by improving the detector by using a high-resolution camera. This revealed that the light source also needed to be improved by using LED excitation instead of a laser light source. As a receptor, different self-assembled monolayers have been screened. It can be seen that the nanoparticle receptor interaction is of a complex nature. The best system when taking sensitivity as well as reversibility into account is given by a dodecanethiol monolayer on the gold sensor surface. Lanthanide-doped nanoparticles, 29 nm in diameter and with a similar refractive index to the most common silica nanoparticles were detected in water down to 1.5 mu g mL(-1). The sensor can be fully regenerated within one hour without the need for any washing buffer. This sensing concept is expected to be easily adapted for the detection of nanoparticles of different size, shape, and composition, and upon miniaturization, suitable for long-term applications to monitor the quality of water.}, language = {en} } @inproceedings{HauslerRothVitzthumeckeretal., author = {Hausler, Peter and Roth, Carina and Vitzthumecker, Thomas and Bierl, Rudolf}, title = {Miniaturized Surface Plasmon Resonance Based Sensor Systems}, series = {Optics, Photonics and Laser Technology 2018}, booktitle = {Optics, Photonics and Laser Technology 2018}, editor = {Ribeiro, Paulo and Raposo, Maria}, publisher = {Springer Nature}, address = {Cham}, isbn = {978-3-030-30112-5}, doi = {10.1007/978-3-030-30113-2_8}, pages = {169 -- 195}, abstract = {Surface Plasmon Resonance (SPR) is a well-known and established technology in bioanalysis and pharmaceutical sciences. Due to the expensive instrumentation and the need of trained people, it is mainly limited to applications in laboratories. However, there are some areas like environmental monitoring, chemical processing and civil infrastructure, which urgently need new sensor technologies. SPR has the potential to serve these fields. In order to be qualified for a use in these areas SPR has to overcome some hurdles. The instrumentation has to be robust, small in size and cheap. A device, which fits these needs, will be a micro-opto-electro-mechanical system (MOEMS) with integrated intelligent algorithms. In this book chapter, examples of miniaturized SPR devices are introduced, the limitations which have to be overcome as well as the possibilities for future applications are proposed. Due to the manifold advantages of this technology and the dropping prices for imaging sensors, Surface Plasmon Resonance imaging (SPRi) might become one of the leading technologies for SPR smart sensor systems.}, language = {en} } @unpublished{RueckMuellerJobstetal., author = {R{\"u}ck, Thomas and M{\"u}ller, Max and Jobst, Simon and Weigl, Stefan and Pangerl, Jonas and Bierl, Rudolf and Matysik, Frank-Michael}, title = {Digital Twin of a Photoacoustic Trace Gas Sensor for Monitoring Methane in Complex Gas Compositions}, publisher = {Elsevier / SSRN}, doi = {10.2139/ssrn.4215170}, pages = {22}, abstract = {The digitalization of industrial processes requires smart sensor systems. Photoacoustic spectroscopy is well suited for this purpose as it allows for small-sized and low-cost trace gas analysis. However, the method is susceptible to changes in measurement conditions and standard calibration routines often fail to correct for all changes. We therefore created a Digital Twin (DT) of a photoacoustic trace gas sensor for methane and evaluated it regarding variations in gas composition (CH4, N2, O2, CO2, H2O), temperature and pressure. With a mean absolute percentage error of 0.8 \% the accuracy of the sensor after DT compensation significantly exceeds the 24 \% achieved based on standard calibration in nitrogen. For the first time, we can fully analytically compute the photoacoustic signal under moderate ambient conditions with an error in the ppbV range by taking a holistic approach. Assuming knowledge of the underlying energy transfer processes, the model of this Digital Twin can be adapted to any microphone based photoacoustic sensor for monitoring any analyte species.}, language = {en} } @inproceedings{MuellerRueckJobstetal., author = {M{\"u}ller, Max and R{\"u}ck, Thomas and Jobst, Simon and Pangerl, Jonas and Bierl, Rudolf and Matysik, Frank-Michael}, title = {Creating a Digital Twin of a Photoacoustic Gas Sensor for Methane Detection in Complex Gas Matrices}, series = {Proceedings Optical Sensors and Sensing Congress 2022 (AIS, LACSEA, Sensors, ES): 11-15 July 2022, Vancouver, British Columbia, Canada}, booktitle = {Proceedings Optical Sensors and Sensing Congress 2022 (AIS, LACSEA, Sensors, ES): 11-15 July 2022, Vancouver, British Columbia, Canada}, publisher = {Optica Publishing Group}, isbn = {978-1-957171-10-4}, doi = {10.1364/LACSEA.2022.LW4D.2}, abstract = {We present the calculation results from a digital twin (DT) of our photoacoustic (PA) sensor for methane detection, regarding gas composition, temperature and pressure variations.}, language = {en} } @unpublished{MuellerWeiglMuellerWilliamsetal., author = {M{\"u}ller, Max and Weigl, Stefan and M{\"u}ller-Williams, Jennifer and Lindauer, Matthias and R{\"u}ck, Thomas and Jobst, Simon and Bierl, Rudolf and Matysik, Frank-Michael}, title = {Ambient methane monitoring at Hohenpeißenberg utilizing photoacoustic spectroscopy and cavity ring down spectroscopy}, doi = {10.5194/egusphere-2023-1010}, abstract = {With an atmospheric concentration of approximately 2000 parts per billion (ppbV, 10-9) methane (CH4) is the second most abundant greenhouse gas (GHG) in the atmosphere after carbon dioxide (CO2). The task of long-term and spatially resolved GHG monitoring to verify whether climate policy actions are effective, is becoming more crucial as climate change progresses. In this paper we report the CH4 concentration readings of our photoacoustic (PA) sensor over a five day period at Hohenpeißenberg, Germany. As a reference device a calibrated cavity ringdown spectrometer Picarro G2301 from the meteorological observatory was employed. Trace gas measurements with photoacoustic instruments promise to provide low detection limits at comparably low costs. However, PA devices are often susceptible to cross-sensitivities related to environmental influences. The obtained results show that relaxation effects due to fluctuating environmental conditions, e.g. ambient humidity, are a non-negligible factor in PA sensor systems. Applying algorithm compensation techniques, which are capable of calculating the influence of relaxational effects on the photoacoustic signal, increase the accuracy of the photoacoustic sensor significantly. With an average relative deviation of 1.11 \% from the G2301, the photoacoustic sensor shows good agreement with the reference instrument.}, language = {en} }