@article{ZaglerLandgrafRuecketal., author = {Zagler, Andreas and Landgraf, Ferdinand and R{\"u}ck, Thomas and Bierl, Rudolf}, title = {Entwicklung eines mikromechanischen kapazitiven Schalldetektors im resonanten Betrieb f{\"u}r die photoakustische Spurengasanalyse}, series = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, journal = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, publisher = {VDE-Verlag}, address = {Berlin}, language = {de} } @inproceedings{GaidaWeiglRuecketal., author = {Gaida, Peter and Weigl, Stefan and R{\"u}ck, Thomas and Bierl, Rudolf}, title = {Portable photoakustische Messeinheit zur NO2 Detektion im Spurenbereich}, series = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, booktitle = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, publisher = {VDE-Verlag}, address = {Berlin}, isbn = {978-3-8007-4491-6}, language = {de} } @misc{HauslerRothVitzthumeckeretal., author = {Hausler, Peter and Roth, Carina and Vitzthumecker, Thomas and Fischer, Johannes and Bierl, Rudolf}, title = {Motionless SPR-angle scan with a miniaturized device}, series = {Europtrode XIV, Naples, 25-28 March 2018}, journal = {Europtrode XIV, Naples, 25-28 March 2018}, language = {en} } @inproceedings{WeiglGaidaRuecketal., author = {Weigl, Stefan and Gaida, Peter and R{\"u}ck, Thomas and Bierl, Rudolf}, title = {Portable Measurement Unit for NO2 Trace Gas Detection}, series = {PHOTOPTICS 2018, 6th International Conference on Photonics, Optics and Laser Technology, 25 - 27 January 2018, Funchal Madeira}, booktitle = {PHOTOPTICS 2018, 6th International Conference on Photonics, Optics and Laser Technology, 25 - 27 January 2018, Funchal Madeira}, language = {en} } @techreport{UngerRueckLandgrafetal., author = {Unger, J. and R{\"u}ck, Thomas and Landgraf, Ferdinand and Bierl, Rudolf}, title = {Herstellung und Analyse der Resonanzfrequenz eines MEMS Cantilever f{\"u}r das CEPAS Verfahren}, abstract = {Diese Abhandlung beschreibt das Konzept eines mikroeletromechanischen Systems (MEMS), das im Messverfahren der cantilever enhanced photoacoustic spectroscopy (CEPAS) Verwendung finden soll. Es wird die Herstellung eines einseitig eingespannten Biegebalkens aus Silizium mittels deep reactiv ion etching (DRIE) beschrieben. Des Weiteren wird die Resonanzfrequenz dieses Cantilevers mit Hilfe Laservibrometertechnik untersucht. Die resultierenden resonanten Schwingungen 0.Ordnung werden mit den Ergebnissen einer vereinfachten theoretischen N{\"a}herung verglichen. Die Messergebnisse stehen in gutem Zusammenhang mit den theoretischen Werten. Solche Cantilever, die aus silicon on insula tor (SOI) Wafer angefertigt wurden, weisen bei einer Zielfrequenz ein mittlere Abweichung von Δf = 118±26Hz (bzw.Δf =0,76±0,17\%) auf.}, language = {de} } @inproceedings{HollerHauslerRothetal., author = {Holler, Sven and Hausler, Peter and Roth, Carina and Bierl, Rudolf}, title = {Gestapelte Au-Al-Au und Au-Ag-Au Schichten als aktive Schichten f{\"u}r die Oberfl{\"a}chenplasmonenresonanzspektroskopie}, series = {5. Landshuter Symposium Mikrosystemtechnik, M{\"a}rz 2016}, booktitle = {5. Landshuter Symposium Mikrosystemtechnik, M{\"a}rz 2016}, publisher = {Fachhochschule Landshut}, address = {Landshut}, isbn = {978-3-9812696-9-7}, pages = {192 -- 198}, language = {de} } @inproceedings{RothHauslerBierl, author = {Roth, Carina and Hausler, Peter and Bierl, Rudolf}, title = {Einbindung eines CMOS-Detektors in einen hochintegrierten SPR-Sensor}, series = {5. Landshuter Symposium Mikrosystemtechnik, M{\"a}rz 2016}, booktitle = {5. Landshuter Symposium Mikrosystemtechnik, M{\"a}rz 2016}, publisher = {Fachhochschule Landshut}, address = {Landshut}, isbn = {78-3-9812696-9-7}, pages = {200 -- 205}, language = {de} } @article{RomanoMicklitzOlbrichetal., author = {Romano, Marco and Micklitz, Matthias and Olbrich, Florian and Bierl, Rudolf and Ehrlich, Ingo and Gebbeken, Norbert}, title = {Experimental investigation of damping properties of unidirectionally and fabric reinforced plastics by the free decay method}, series = {Journal of Achievements in Materials and Manufacturing Engineering}, volume = {63}, journal = {Journal of Achievements in Materials and Manufacturing Engineering}, number = {2}, pages = {65 -- 80}, abstract = {Purpose: of this paper is experimental investigation of damping properties of unidirectionally and fabric reinforced plastics by the free decay method. Design/methodology/approach: For the evaluation of the presumed effect experimental structural dynamic investigations comparing unidirectionally and fabric reinforced plastics are carried out. In detail the free decay behaviour of flat beamlike specimens under fixed-free boundary conditions and relatively constant and reproducible displacement excitation is investigated. Findings: The vibrating structure has been measured by a laser scanning vibrometer PSV 400 from POLYTEC. In both cases evaluation of the results yields enhanced damping properties of the specimens with fabric reinforcement compared to the unidirectionally reinforced specimens. The results justify the presumed acting of a mesomechanic kinematic. Research limitations/implications: The results show that in either case the material damping in terms of the logarithmic decrement of the fabric reinforced material is higher than the material damping in of the unidirectionally reinforced material. Additionally, when the fabric reinforced specimens are addressed, in each case the plain weave reinforced specimens exhibited higher values of the material damping as the twill weave 2/2 reinforced ones. Originality/value: Ondulations in fabrics as a textile semi-finished product are caused by the alternating crossing of warp and fill yarns. In the mesoscopic scale the acting of a mesomechanic kinematic is presumed to enhance the damping properties under cyclic elastic deformation. For the evaluation of the presumed effect experimental structural dynamic investigations comparing unidirectionally and fabric reinforced plastics are carried out.}, language = {en} } @inproceedings{JobstBierl, author = {Jobst, Simon and Bierl, Rudolf}, title = {A Comparison of Correlation and Zero-Crossing Based Techniques in Ultrasonic Measurement}, series = {10th International Symposium on Applied Reconfigurable Computing (ARC'2014), Vilamoura, Algarve, Portugal, 14 - 16 April, 2014}, booktitle = {10th International Symposium on Applied Reconfigurable Computing (ARC'2014), Vilamoura, Algarve, Portugal, 14 - 16 April, 2014}, abstract = {Ultrasound measurement technology has advancedin previous decades due to positive developments in computing power and lower cost for the necessary hardware. Correlation-based processing can be advantageous for high-accuracy measurements, especially in noisy environments. Higher computational load makes correlation less attractive for industrialapplications, though, favouring traditional processing techniques. A platform for comparing various processing techniques hasbeen developed. It was found that both zero-crossing detectionas well as correlation can achieve very high accuracy over a hightemperature range but that correlation-based processing can lead to a significant precision bias depending on system bandwidth.}, language = {en} } @inproceedings{HofmannBierlRueck, author = {Hofmann, Matthias and Bierl, Rudolf and R{\"u}ck, Thomas}, title = {Implementation of a dual-phase lock-in amplifier on a TMS320C5515 digital signal processor}, series = {Proceedings of the 5th European DSP Education and Research Conference (EDERC), 13-14 Sept. 2012, Amsterdam}, booktitle = {Proceedings of the 5th European DSP Education and Research Conference (EDERC), 13-14 Sept. 2012, Amsterdam}, doi = {10.1109/EDERC.2012.6532217}, abstract = {A digital dual-phase lock-in amplifier that is capable to run on a low-cost, low-power platform comprising a 16-bit fixed-point digital signal processor was developed. This is achieved by a set of optimised digital filters including an exponential averager to adjust the time constant of the overall filter. The reference frequency is generated using a direct digital synthesis source utilising angle decomposition with a resolution of 1 Hz. The digital lock-in algorithm is described and the performance of the algorithm is analysed. The experimental results show that the developed lock-in amplifier achieves similar performance to a commercially available lock-in amplifier.}, language = {en} } @inproceedings{RueckLandgrafLaeppleetal., author = {R{\"u}ck, Thomas and Landgraf, Ferdinand and L{\"a}pple, I. and Unger, J. and Matysik, Frank-Michael and Bierl, Rudolf}, title = {Specification of an improved photoacoustic setup for high-sensitive, low-cost NO2 trace gas detection}, series = {18th International Conference on Photoacoustic and Photothermal Phenomena (ICPPP18), 2015, September 6-10, Novi Sad, Serbia}, booktitle = {18th International Conference on Photoacoustic and Photothermal Phenomena (ICPPP18), 2015, September 6-10, Novi Sad, Serbia}, language = {en} } @inproceedings{vanderWeerdBierlMatysik, author = {van der Weerd, Bastiaan and Bierl, Rudolf and Matysik, Frank-Michael}, title = {A Conductivity Probe for the Determination of Carbon Dioxide Tension at the Oxygenator Exhaust Outlet during Extracorporeal Membrane Oxygenation (ECMO)}, series = {analytica Conference 2014, 1. bis 4. April, M{\"u}nchen}, booktitle = {analytica Conference 2014, 1. bis 4. April, M{\"u}nchen}, language = {en} } @inproceedings{vanderWeerdBierlMatysik, author = {van der Weerd, Bastiaan and Bierl, Rudolf and Matysik, Frank-Michael}, title = {A Conductivity Probe for the Determination of Carbon Dioxide Tension at the Oxygenator Exhaust Outlet during Extracorporeal Membrane Oxygenation (ECMO)}, series = {Electrochemistry 2014, September 22 - 24, Mainz}, booktitle = {Electrochemistry 2014, September 22 - 24, Mainz}, language = {en} }