@misc{SchudererRillSchulzetal., author = {Schuderer, Matthias and Rill, Georg and Schulz, Carsten and Schaeffer, Thomas}, title = {Dynamic Stick-Slip Models based on Continuous and Discontinuous Friction Characteristics}, series = {ENOC - European Nonlinear Dynamics Conference, 11th, 2024, Delft}, journal = {ENOC - European Nonlinear Dynamics Conference, 11th, 2024, Delft}, doi = {10.2139/ssrn.5014569}, pages = {17}, abstract = {This paper presents the implementation of a recently developed continuous second-order dynamic friction model (FrD2) in the commercial multibody system software Simpack, where it is evaluated against Simpack's discontinuous friction model for stick-slip applications in terms of performance. A method for adapting parameters from the well-known LuGre model to the FrD2 model is introduced. The FrD2 model accurately captures complex friction phenomena, including the Stribeck effect, which is essential for simulating friction-induced vibrations. Tested on a festoon cable system and a belt model, the FrD2 model demonstrates itself as a robust alternative to both the LuGre and Simpack models, especially for applications requiring continuous transitions between static and dynamic friction states, long-term stiction effects, and other complex friction behaviors.}, language = {en} } @article{RillSchuderer, author = {Rill, Georg and Schuderer, Matthias}, title = {A Second-Order Dynamic Friction Model Compared to Commercial Stick-Slip Models}, series = {Modelling}, volume = {4}, journal = {Modelling}, number = {3}, publisher = {MDPI}, issn = {2673-3951}, doi = {10.3390/modelling4030021}, pages = {366 -- 381}, abstract = {Friction has long been an important issue in multibody dynamics. Static friction models apply appropriate regularization techniques to convert the stick inequality and the non-smooth stick-slip transition of Coulomb's approach into a continuous and smooth function of the sliding velocity. However, a regularized friction force is not able to maintain long-term stick. That is why dynamic friction models were developed in recent decades. The friction force depends herein not only on the sliding velocity but also on internal states. The probably best-known representative, the LuGre friction model, is based on a fictitious bristle but realizes a too-simple approximation. The recently published second-order dynamic friction model describes the dynamics of a fictitious bristle more accurately. It is based on a regularized friction force characteristic, which is continuous and smooth but can maintain long-term stick due to an appropriate shift in the regularization. Its performance is compared here to stick-slip friction models, developed and launched not long ago by commercial multibody software packages. The results obtained by a virtual friction test-bench and by a more practical festoon cable system are very promising. Thus, the second-order dynamic friction model may serve not only as an alternative to the LuGre model but also to commercial stick-slip models.}, language = {en} } @unpublished{RillSchuderer, author = {Rill, Georg and Schuderer, Matthias}, title = {A Second Order Dynamic Friction Model Compared to Commercial Stick-Slip Models}, doi = {10.20944/preprints202306.1233.v1}, abstract = {Friction has long been an important issue in multibody dynamics. Static friction models apply appropriate regularization techniques to convert the stick inequality and the non-smooth stick-slip transition of Coulomb's approach into a continuous and smooth function of the sliding velocity. However, a regularized friction force is not able to maintain long-term stick. That is why, dynamic friction models were developed in the last decades. The friction force depends herein not only on the sliding velocity but also on internal states. The probably best known representative, the LuGre friction model, is based on a fictitious bristle but realizes a too simple approximation. The recently published second order dynamic friction model describes the dynamics of a fictitious bristle more accurately. Its performance is compared here to stick-slip friction models, developed and launched not long ago by commercial multibody software packages.}, language = {en} } @misc{SchudererRillSchaefferetal., author = {Schuderer, Matthias and Rill, Georg and Schaeffer, Thomas and Schulz, Carsten}, title = {Friction modeling from a practical point of view}, series = {MULTIBODY2023: 11th ECCOMAS Thematic Conference on Multibody Dynamics, Tampa, 24th-28th May 2023}, journal = {MULTIBODY2023: 11th ECCOMAS Thematic Conference on Multibody Dynamics, Tampa, 24th-28th May 2023}, language = {en} }