@article{SorokinEckerStepanovetal., author = {Sorokin, Vladislav V. and Ecker, Eva and Stepanov, Gennady V. and Shamonin (Chamonine), Mikhail and Monkman, Gareth J. and Kramarenko, Elena Yu and Khokhlov, Alexei R.}, title = {Experimental study of the magnetic field enhanced Payne effect in magnetorheological elastomers}, series = {Soft Matter}, volume = {10}, journal = {Soft Matter}, number = {43}, publisher = {ROYAL Society of CHEMISTRY}, doi = {10.1039/c4sm01738b}, pages = {8765 -- 8776}, abstract = {The dynamic modulus and the loss factor of magnetorheological elastomers (MREs) of various compositions and anisotropies are studied by dynamic torsion oscillations performed in the absence and in the presence of an external magnetic field. The emphasis is on the Payne effect, i.e. the dependence of the elastomer magnetorheological characteristics on the strain amplitude and their evolution with cyclically increasing and decreasing strain amplitudes. MREs are based on two silicone matrices differing in storage modulus (soft, G' similar to 10(3) Pa, and hard, G' similar to 10(4) Pa, matrices). For each matrix, the concentration of carbonyl iron particles with diameters of 3-5 mu m was equal to 70 and 82 mass\% (22 and 35 vol\%, respectively) in the composite material. Samples for each filler content, isotropic and aligned-particles, are investigated. It is found that the Payne effect significantly increases in the presence of an external magnetic field and varies with the cyclical loading which reaches saturation after several cycles. The results are interpreted as the processes of formation-destruction-reformation of the internal filler structure under the simultaneously applied mechanical force and magnetic field. Impacts of matrix elasticity and magnetic interactions on the filler alignment are elucidated.}, language = {en} } @article{ChenSongZhangetal., author = {Chen, Rui and Song, Ruizhou and Zhang, Zhuo and Bai, Long and Liu, Fuqiang and Jiang, Pei and Sindersberger, Dirk and Monkman, Gareth J. and Guo, Jianglong}, title = {Bio-Inspired Shape-Adaptive Soft Robotic Grippers Augmented with Electroadhesion Functionality}, series = {Soft Robotics}, volume = {6}, journal = {Soft Robotics}, number = {6}, publisher = {Mary Ann Liebert}, doi = {10.1089/soro.2018.0120}, pages = {701 -- 712}, abstract = {Soft robotic grippers (SRGs) have been extensively employed in robotic grasping and manipulation applications due to the fact that they are beneficial for pick-and-place of difficult-to-handle and delicate objects with various geometries and stiffness in a comfortable and safer way. This article presents a bio-inspired and shape-adaptive SRG augmented with electroadhesion (EA) functionality, FinEA, by a cost-effective combination of a Fin Ray structured two-fingered SRG with two soft-stretchable EA pads. The EA pads were manufactured by screen printing a layer of electrically conductive and elastomeric carbon black powder mixed with polydimethylsiloxane onto a dielectric substrate. The compliant Fin Ray fingers, composed of soft longitudinal beams and rigid cross beams, were structurally optimized by the finite element method using ABAQUS/CAE based on three key parameters: the open angle of the longitudinal beams, the spacing between the cross beams, and the incline angle of the cross beams. The soft beams were produced by a traditional soft lithography method, whereas the rigid cross beams were three-dimensionally printed. The resultant FinEA grippers were capable of lifting not only flat/thin materials without distorting them due to the employment of EA, but also concave and convex objects due to the passively shape-adaptive Fin Ray structure and the EA functionality. In addition, the proposed FinEA grippers were able to grasp delicate materials and objects whose diameters are larger than the overall gripper length. Furthermore, 65\% more weight in shear were picked up by the FinEA gripper when 4 kV was applied compared with 0 V. The FinEA concept provides useful and alternative solution for controllable adhesion-based SRGs and may facilitate the inspiration and development of future SRGs with added functionality and enhanced versatility.}, language = {en} } @article{DiermeierSindersbergerAngeleetal., author = {Diermeier, Andreas and Sindersberger, Dirk and Angele, Peter and Kujat, Richard and Monkman, Gareth J.}, title = {Sensor system for use with low intensity pulsed ultrasound}, series = {Sensor review}, volume = {39}, journal = {Sensor review}, number = {6}, publisher = {Emerald}, issn = {0260-2288}, doi = {10.1108/SR-11-2018-0304}, pages = {828 -- 834}, abstract = {Purpose Ultrasound is a well-established technology in medical science, though many of the conventional measurement systems (hydrophones and radiation force balances [RFBs]) often lack accuracy and tend to be expensive. This is a significant problem where sensors must be considered to be "disposable" because they inevitably come into contact with biological fluids and expense increases dramatically in cases where a large number of sensors in array form are required. This is inevitably the case where ultrasound is to be used for the in vitro growth stimulation of a large plurality of biological samples in tissue engineering. Traditionally only a single excitation frequency is used (typically 1.5 MHz), but future research demands a larger choice of wavelengths for which a single broadband measurement transducer is desirable. Furthermore, because of implementation conditions there can also be large discrepancies between measurements. The purpose of this paper deals with a very cost-effective alternative to expensive RFBs and hydrophones. Design/methodology/approach Utilization of cost-effective piezoelectric elements as broadband sensors. Findings Very effective results with equivalent (if not better) accuracy than expensive alternatives. Originality/value This paper concentrates on how very cost-effective piezoelectric ultrasound transducers can be implemented as sensors for ultrasound power measurements with accuracy as good, if not better than those achievable using radiation force balances or hydrophones.}, language = {en} } @article{SindersbergerPremMonkman, author = {Sindersberger, Dirk and Prem, Nina and Monkman, Gareth J.}, title = {Self-assembling structure formation in low-density magnetoactive polymers}, series = {Journal of Applied Polymer Science}, volume = {137}, journal = {Journal of Applied Polymer Science}, number = {3}, publisher = {Wiley}, doi = {10.1002/app.48291}, abstract = {The formation of microstructures in magnetoactive polymers (MAPs) is a recently discovered phenomenon found only with very low filler particle concentrations (less than 3 wt \%). Due to the degassing process, filler particles collect around an ascending bubble, which dissolves at a certain point leaving particulate rings within the matrix. The formation of toroidal microstructures commences as filler concentration approaches 1 wt \%. The development of coherent parallel aligned rings with a compact order continues as particle concentrations increase toward 2 wt \%. Between 2 and 3 wt \% capillary doublets develop, while mass percentages higher than 3\% result in increasing entropy as the random order of particle agglomeration found in higher concentration MAP dominates. Self-structured samples of different filler material and concentrations between 1 and 3 wt \% have been investigated using X-ray tomography, where the emerging structures can be observed and visualized. The ring structures resulting from this research represent microinductivities which can be fabricated in a targeted manner, thus enabling new applications in the high-frequency radio field. Furthermore, these anisotropic, but well-organized, structures have magnetic field-dependent implications for optical, thermal, acoustic, and medical applications.}, language = {en} } @inproceedings{EgersdoerferZeidlerWieseretal., author = {Egersd{\"o}rfer, Stefan and Zeidler, A. and Wieser, A. and Trompier, F. and Monkman, Gareth J. and Shamonin (Chamonine), Mikhail}, title = {A portable accident dosimeter using tooth enamel}, series = {Proceedings of the 7th International Symposium on EPR Dosimetry and Applications and the 2nd International Conference on Biodosimetry held at the Uniformed Services University of the Health Sciences, Bethesda, MD, USA, 10-13 July 2006}, booktitle = {Proceedings of the 7th International Symposium on EPR Dosimetry and Applications and the 2nd International Conference on Biodosimetry held at the Uniformed Services University of the Health Sciences, Bethesda, MD, USA, 10-13 July 2006}, publisher = {Pergamon}, address = {Oxford}, language = {en} } @book{MonkmanHesseSteinmannetal., author = {Monkman, Gareth J. and Hesse, Stefan and Steinmann, Ralf and Schunk, Henrik}, title = {Robot Grippers}, publisher = {Wiley}, isbn = {9783527406197}, doi = {10.1002/9783527610280}, abstract = {Since robotic prehension is widely used in all sectors of manufacturing industry, this book fills the need for a comprehensive, up-to-date treatment of the topic. As such, this is the first text to address both developers and users, dealing as it does with the function, design and use of industrial robot grippers. The book includes both traditional methods and many more recent developments such as micro grippers for the optolectronics industry. Written by authors from academia, industry and consulting, it begins by covering the four basic categories of robotic prehension before expanding into sections dealing with endeffector design and control, robotic manipulation and kinematics. Later chapters go on to describe how these various gripping techniques can be used for a common industrial aim, with details of related topics such as: kinematics, part separation, sensors, tool excahnge and compliance. The whole is rounded off with specific examples and case studies. With more than 570 figures, this practical book is all set to become the standard for advanced students, researchers and manufacturing engineers, as well as designers and project managers seeking practical descriptions of robot endeffectors and their applications.}, language = {en} } @article{SorokinStepanovShamoninChamonineetal., author = {Sorokin, Vladislav V. and Stepanov, Gennady V. and Shamonin (Chamonine), Mikhail and Monkman, Gareth J. and Kramarenko, Elena Yu}, title = {Magnetorheological behavior of magnetoactive elastomers filled with bimodal iron and magnetite particles}, series = {Smart materials and structures}, volume = {26}, journal = {Smart materials and structures}, number = {3}, publisher = {IOP Publishing}, doi = {10.1088/1361-665X/26/3/035019}, abstract = {Magnetoactive elastomers (MAE) based on soft silicone matrices, filled with various proportions of large diameter ( approximately 50 mu m) iron and small diameter ( approximately 0.5 mu m) magnetite particles are synthesized. Their rheological behavior in homogeneous magnetic fields up to 600 mT is studied in detail. The addition of small magnetite particles facilitates fabrication of uniformly distributed magnetic elastomer composites by preventing aggregation and sedimentation of large particles during curing. It is shown that using the proposed bimodal filler particles it is possible to tailor various magnetorheological (MR) properties which can be useful for different target applications. In particular, either absolute or relative magnetorheological effects can be tuned. The value of the damping factor as well as the range of deformation amplitudes for the linear viscoelastic regime can be chosen. The interdependencies between different MR properties of bimodal MAEs are considered. The results are discussed in the model framework of particle network formation under the simultaneous influence of external magnetic fields and mechanical deformation.}, language = {en} } @article{SindersbergerDiermeierPremetal., author = {Sindersberger, Dirk and Diermeier, Andreas and Prem, Nina and Monkman, Gareth J.}, title = {Printing of hybrid magneto active polymers with 6 degrees of freedom}, series = {Materials today communications}, volume = {15}, journal = {Materials today communications}, number = {June}, publisher = {Elsevier}, doi = {10.1016/j.mtcomm.2018.02.032}, pages = {269 -- 274}, abstract = {3D printing techniques offer a versatile method for the fabrication and structuring of magnetoactive polymer (MAP) components and devices for research prototype development. MAP materials enjoy an advantage in that the particulate content may be manipulated by external magnetic fields during the forming and curing processes. Controlled particle diffusion within the polymer matrix, by means of external fields applied during the printing process, influences a further three spatial dimensions. This permits control of the spatial particle concentration and makes free displacement of particle accumulations possible during the crosslinking phase. Particles which are susceptible to electric or magnetic fields can thereby be shifted into regions previously free of particles. The additional 3 graded dispersion axes effectively results in what can be described as 6 degrees of freedom (6DOF) printing. Electrically conductive polymers combined with non-conductive areas, provide an additional benefit for the production of complex hybrid structures. This may be augmented by the combination of magnetically active thermoplastics as inelastic structural components together with mechanically deformable elastomers. The combination of all fabrication methods in one hybrid printing process makes the production of complex sensor and actuator systems in one manufacturing sequence possible. This far exceeds the capabilities of conventional casting and machining operations and opens new possibilities for the fabrication of soft material elements.}, language = {en} } @article{StollMayerMonkmanetal., author = {Stoll, Andrea and Mayer, Matthias and Monkman, Gareth J. and Shamonin (Chamonine), Mikhail}, title = {Evaluation of highly compliant magneto-active elastomers with colossal magnetorheological response}, series = {Journal of applied polymer science}, journal = {Journal of applied polymer science}, publisher = {Wiley}, address = {New York, NY}, issn = {1097-4628}, doi = {10.1002/app.39793}, abstract = {Highly compliant elastomers with a shear storage modulus as low as 25 Pa are prepared using commercially available silicone, plasticizer, and tactile mutator silicone additive. They are used as matrix material for magneto-active elastomers (MAEs) with carbonyl iron contents between 0 and 85 wt \%. In the absence of an external magnetic field, the storage modulus of MAEs based on two selected mixtures ranges between ~100 Pa and ~2000 Pa. Addition of a mutator to the matrix mixture results in a long post-cure period depending on the curing temperature and the initial mixture. In the presence of a magnetic field, the presented MAEs exhibit a strong magneto-induced change in storage modulus resulting in a colossal magnetorheological effect of >106 \% which is ~30 times higher than previously reported values. The results are of interest in applications using such elastomers as cell substrates with magnetically tunable rigidity.}, language = {en} } @article{FuechtmeierEgersdoerferMaietal., author = {F{\"u}chtmeier, Bernd and Egersdoerfer, Stefan and Mai, Ronny and Hente, Rainer and Dragoi, Daniel and Monkman, Gareth J. and Nerlich, Michael}, title = {Reduction of femoral shaft fractures in vitro by a new developed reduction robot system "RepoRobo"}, series = {Injury}, volume = {35}, journal = {Injury}, number = {1, Supplement}, publisher = {Elsevier}, organization = {Elsevier}, issn = {1879-0267}, doi = {10.1016/j.injury.2004.05.019}, pages = {113 -- 119}, abstract = {Closed reduction of the long bones is associated with the use of considerable force. This force must be maintained for the reduction maneuver and fixation process. At present, apart from the extension table or the large AO distractor, only rather inadequate reduction aids are available. A solution to this problem is being sought in the form of a robotic system with which precision can be improved and the holding effort reduced. In the research project presented here, a synthetic femur with integrated tensioned mainspring and a 32-A3 type fracture served as a bone reduction model. The fracture was stabilized with a standard AO fixator. A St{\"a}ubli robot (model RX130) was converted by appropriate modification so that it could be used for the reduction of femoral shaft fractures in vitro. The robot was equipped with a pneumatic 2-fingered gripper, on which the fingers have been modified so that they can grip the AO fixator clamp. A Force-Feedback-Sensor was inserted between the gripper and the robot to obtain online recordings of the forces and moments in all three axes. With this setup it is possible to achieve precise reduction of the fracture in all planes under visual control.}, language = {en} } @article{Monkman, author = {Monkman, Gareth J.}, title = {Advances in Shape Memory Polymer Actuation}, series = {Mechatronics}, volume = {10}, journal = {Mechatronics}, number = {4/5}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1873-4006}, doi = {10.1016/S0957-4158(99)00068-9}, pages = {489 -- 498}, abstract = {Shape memory materials fulfill an important role in both actuation and mechanical coupling between actuators and associated dynamic systems. The simplest techniques are thermally based and in addition to the more common shape memory alloys there are also shape memory polymers. These have similar characteristics to those of their metallic cousins, but there the relationship stops. The basic physical principles are very different and this paper attempts to outline the current state-of-the-art to those already involved with the technology and perhaps open a fresh chapter in smart materials to those who are new to it.}, language = {en} } @inproceedings{BoodyBickelKempfetal., author = {Boody, F. P. and Bickel, Peter and Kempf, J. and Monkman, Gareth J. and H{\"o}pfl, R. and Hora, H. and Laska, L. and Krasa, J. and Pfeifer, M. and Rohlena, K. and Juha, L. and Wolowski, J. and Badziak, J. and Parys, P. and Ryc, L. and Worya, E. and Szydlowski, A. and Torrisi, L. and Gammino S., and Mezzasalma, A.}, title = {Flexible laser ion sources for surface modification}, series = {Plasma Production by Laser Ablation, PPLA 2003 : Messina and Catania, Italy, 18-19 September 2003}, booktitle = {Plasma Production by Laser Ablation, PPLA 2003 : Messina and Catania, Italy, 18-19 September 2003}, publisher = {World Scientific Publishing}, address = {Singapore}, language = {en} } @article{Monkman, author = {Monkman, Gareth J.}, title = {Precise Piezoelectric Prehension}, series = {Industrial Robot}, volume = {27}, journal = {Industrial Robot}, number = {3}, publisher = {MCB University Press}, issn = {0143-991x}, doi = {10.1108/01439910010371605}, pages = {189 -- 194}, abstract = {Piezoelectric actuators are well established for use in expensive optical equipment. Within the last decade, relatively inexpensive piezoelectric actuators have become established technology in pneumatic switching and the first piezoelectrically driven impactive robot grippers are just starting to emerge. Although this article concentrates largely on the use of piezoelectric actuators for use in robot gripping systems, the potential for applications outside this field is immense.}, language = {en} } @article{Monkman, author = {Monkman, Gareth J.}, title = {Workpiece Retention during Machine Processing}, series = {Assembly Automation}, volume = {21}, journal = {Assembly Automation}, number = {1}, publisher = {Emerald}, address = {Bringley}, issn = {1758-4078}, doi = {10.1108/01445150110381754}, pages = {61 -- 67}, abstract = {Discusses the failings of conventional fixturing systems such as jigs and clamps and describes how electrorheological fluids can be used for flexible fixturing and workpiece retention.}, language = {en} } @article{Monkman, author = {Monkman, Gareth J.}, title = {Special Issue on Miniature Actuators}, series = {Mechatronics}, volume = {10}, journal = {Mechatronics}, number = {4/5}, publisher = {Elsevier}, doi = {10.1016/S0957-4158(99)00061-6}, pages = {429 -- 430}, language = {en} } @inproceedings{Monkman, author = {Monkman, Gareth J.}, title = {Auswirkungen der Mechatronik auf die Entwicklungsmethodik}, series = {Mechatronik Forum, OTTI, Handelskammer Regensburg, 25.-26. Oktober 2000}, booktitle = {Mechatronik Forum, OTTI, Handelskammer Regensburg, 25.-26. Oktober 2000}, language = {de} } @inproceedings{KreitmeierSchulzMonkmanetal., author = {Kreitmeier, Florian and Schulz, Irene and Monkman, Gareth J. and Shamonin (Chamonine), Mikhail and Fetisov, Yuri K. and Chashin, Dmitri V. and Fetisov, Leonid Y.}, title = {Observation of Nonlinear Magnetoelectric Response to Magnetic Pulses in Layered Magnetostrictive-Piezoelectric Structures}, publisher = {IEEE}, doi = {10.1109/ISAF.2012.6297739}, abstract = {A detailed experimental study of the magnetoelectric response of planar bi- and symmetric trilayer composite structures to magnetic field pulses is reported. The structures consist of layers of commercially available piezoelectric (lead zirconate titanate) and magnetostrictive (permendur or nickel) materials. The magnetic-field pulses have the form of a half-wave sine function with duration of 450 μs and amplitude from 500 Oe up to 38 kOe. The measurement method is explained and the measured time dependence of the resulting voltage is presented. The most interesting case, when pulse amplitudes are sufficiently large (~ 1-10 kOe) and various types of acoustic oscillation with frequencies much larger than the reciprocal pulse length are excited in the structures, is considered. The dependencies of the magnetoelectric voltage coefficient on the excitation frequency and the applied magnetic field are calculated. By digital signal processing the results are compared with those obtained by the method of harmonic field modulation (HFM). The findings are of interest for developing magnetoelectric sensors for pulsed magnetic fields as well as for rapid characterization of magnetoelectric composite structures.}, language = {en} } @article{HirmerDanilovGiglbergeretal., author = {Hirmer, Marion and Danilov, Sergey N. and Giglberger, Stephan and Putzger, J{\"u}rgen and Niklas, Andreas and J{\"a}ger, Andreas and Hiller, Karl-Anton and Schmalz, Gottfried and Redlich, Britta and Schulz, Irene and Monkman, Gareth J. and Ganichev, Sergey D.}, title = {Spectroscopic Study of Human Teeth and Blood from Visible to Terahertz Frequencies for Clinical Diagnosis of Dental Pulp Vitality}, series = {Journal of Infrared, Millimeter, and Terahertz Waves}, volume = {33}, journal = {Journal of Infrared, Millimeter, and Terahertz Waves}, publisher = {Springer}, issn = {1866-6906}, doi = {10.1007/s10762-012-9872-3}, pages = {366 -- 375}, abstract = {Transmission spectra of wet human teeth and dentin slices, together with blood of different flow rates were investigated. The measurements carried out over a wide spectral range, from visible light down to terahertz radiation. The results make it possible to find the optimum light frequency for an all-optical determination of pulpal blood flow and, consequently, for clinically diagnosis of tooth vitality.}, language = {en} } @inproceedings{SchulzPutzgerNiklasetal., author = {Schulz, Irene and Putzger, J{\"u}rgen and Niklas, Andreas and Brandt, M. and J{\"a}ger, Andreas and Hardt, A. and Kn{\"o}rzer, S. and Hiller, Karl-Anton and L{\"o}ffler, S. and Schmalz, Gottfried and Danilov, Sergey N. and Giglberger, Stephan and Hirmer, Marion and Ganichev, Sergey D. and Monkman, Gareth J.}, title = {PPG signal acquisition and analysis on in vitro tooth model for dental pulp vitality assessmen}, series = {2nd Applied Research Conference 2012 (ARC 2012), 25./26. June 2012, Nuremberg}, booktitle = {2nd Applied Research Conference 2012 (ARC 2012), 25./26. June 2012, Nuremberg}, publisher = {Shaker-Verlag}, address = {Aachen}, organization = {ARC}, pages = {142 -- 146}, language = {en} } @inproceedings{ZappaMonkmanEgersdoerferetal., author = {Zappa, O. and Monkman, Gareth J. and Egersd{\"o}rfer, Stefan and Datzer, G. and Kahled, W. and B{\"o}se, Holger and Tunayar, A.}, title = {High Voltage Switching using Bulk GaAs}, series = {Actuator 2004 : 9th International Conference on New Actuators \& 3rd International Exhibition on Smart Actuators and Drive Systems, 14-16 June 2004, Bremen, Germany}, booktitle = {Actuator 2004 : 9th International Conference on New Actuators \& 3rd International Exhibition on Smart Actuators and Drive Systems, 14-16 June 2004, Bremen, Germany}, publisher = {HVG Hanseatische Veranstaltungs-GmbH}, address = {Bremen}, language = {en} } @inproceedings{Monkman, author = {Monkman, Gareth J.}, title = {Sensors and Actuators in Automation}, series = {Ostbayerisches Fachforum f{\"u}r Mechatronik, Roding, 16. M{\"a}rz 2001}, booktitle = {Ostbayerisches Fachforum f{\"u}r Mechatronik, Roding, 16. M{\"a}rz 2001}, language = {en} } @article{Monkman, author = {Monkman, Gareth J.}, title = {Electroadhesive Microgrippers}, series = {Assembly Automation}, volume = {24}, journal = {Assembly Automation}, number = {1}, publisher = {MCB University Press}, pages = {326 -- 330}, language = {en} }