@article{KreitmeierChashinFetisovetal., author = {Kreitmeier, Florian and Chashin, Dmitri V. and Fetisov, Yuri K. and Fetisov, Leonid Y. and Schulz, Irene and Monkman, Gareth J. and Shamonin (Chamonine), Mikhail}, title = {Nonlinear Magnetoelectric Response of Planar Ferromagnetic-Piezoelectric Structures to Sub-Millisecond Magnetic Pulses}, series = {Sensors}, volume = {12}, journal = {Sensors}, number = {11}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/s121114821}, pages = {14821 -- 14837}, abstract = {The magnetoelectric response of bi- and symmetric trilayer composite structures to pulsed magnetic fields is experimentally investigated in detail. The structures comprise layers of commercially available piezoelectric (lead zirconate titanate) and magnetostrictive (permendur or nickel) materials. The magnetic-field pulses have the form of a half-wave sine function with duration of 450 µs and amplitudes ranging from 500 Oe to 38 kOe. The time dependence of the resulting voltage is presented and explained by theoretical estimations. Appearance of voltage oscillations with frequencies much larger than the reciprocal pulse length is observed for sufficiently large amplitudes (~1-10 kOe) of the magnetic-field pulse. The origin of these oscillations is the excitation of bending and planar acoustic oscillations in the structures. Dependencies of the magnetoelectric voltage coefficient on the excitation frequency and the applied magnetic field are calculated by digital signal processing and compared with those obtained by the method of harmonic field modulation. The results are of interest for developing magnetoelectric sensors of pulsed magnetic fields as well as for rapid characterization of magnetoelectric composite structures.}, language = {en} } @article{MonkmanSindersbergerPremetal., author = {Monkman, Gareth J. and Sindersberger, Dirk and Prem, Nina and Szecsey, Tamara}, title = {Smart Stiction}, series = {Robotics \& Automation Engineering Journal}, volume = {4}, journal = {Robotics \& Automation Engineering Journal}, number = {4}, publisher = {Juniper Publishers}, doi = {10.19080/RAEJ.2019.04.555641}, abstract = {Soft robotics could loosely be described as the engineering science of expanded dexterity through controllable flexibility. The exploitation of controllable compliance through the judicious choice of soft flexible members, as opposed to a finite number of rigid kinematic joints, can result in greater dexterity without compromising simplicity. One example is the replacement of segmented mechanical legs with simple compliant material eruciform prolegs. To achieve this in robotics, without introducing additional mechanical joints, mobile surfaces with switchable coefficients of friction is essential. This paper explains how, using silicone based smart materials, the rapid alternation between kinematic and static friction (stiction) may be achieved.}, language = {en} } @article{SindersbergerPremMonkman, author = {Sindersberger, Dirk and Prem, Nina and Monkman, Gareth J.}, title = {Structure formation in low concentration magnetoactive polymers}, series = {AIP advances}, volume = {9}, journal = {AIP advances}, number = {3}, publisher = {AIP Publishing}, doi = {10.1063/1.5079997}, abstract = {This paper concerns recent research into the autonomous formation of micro-structures in low carbonyl iron powder (CIP) concentration magneto active polymers (MAP). Higher concentrations of CIP show an isotropic distribution of magnetic filler throughout the entire sample, while autonomous structure formation is possible at mass concentrations lower than 3\%. The formation of micro-toroids commences as CIP concentration approaches 1\% wt. Further development of coherent rings with a defined order follow as CIP concentrations increase toward 2\% wt, whilst exceeding 3\% wt leads to the same isotropic distribution found in higher concentration MAP. Structured samples containing between 1\% wt and 3\% wt CIP were investigated using X-Ray tomography where solitary structures could clearly be observed. The ring structures represent microinductivities whose geometries can be manipulated during fabrication. In addition, these structures are magnetic field sensitive. This is not only relevant to applications in the GHz and THz areas but recent research has revealed implications for optical, thermal, acoustic and even chemical MAP sensors. (C) 2019 Author(s).}, language = {en} } @article{ChenZhangSongetal., author = {Chen, Rui and Zhang, Zhuo and Song, Ruizhou and Fang, Cheng and Sindersberger, Dirk and Monkman, Gareth J. and Guo, Jianglong}, title = {Time-dependent electroadhesive force degradation}, series = {Smart Materials and Structures}, volume = {29}, journal = {Smart Materials and Structures}, number = {5}, publisher = {IOP Publishing}, doi = {10.1088/1361-665X/ab79b5}, abstract = {This paper concerns a comprehensive investigation of time-dependent electroadhesion (EA) force degradation. EA shear force tests on different object materials (a PET, glass, ABS, and wood plate) have shown that force degradation was dominated by residual polarization charges trapped in the EA pad dielectric rather than in the substrate dielectric from which the object to be prehended is made. In order to explain this dynamic physical phenomenon, a model of dielectric polarization and depolarization has been proposed. According to the derived relationship between EA force and discharge time, three different methods intended to mitigate this problem has been compared: (1) the natural discharge method, (2) the high voltage resistor discharge method, and (3) the discharge prior to field polarity reversal method. These methods are useful for generating repeatable and stable EA forces, which are required for the characterization of EA pads and their subsequent employment in material handling, mobile robot crawling and climbing tasks.}, language = {en} } @article{SchmidtStraubSindersbergeretal., author = {Schmidt, Henrik and Straub, Benedikt B. and Sindersberger, Dirk and Br{\"o}ckel, Ulrich and Monkman, Gareth J. and Auernhammer, G{\"u}nter}, title = {Collision and separation of nickel particles embedded in a Poly dimethylsiloxan matrix under a rotating magnetic field: A strong magneto active function}, series = {Colloid and Polymer Science}, volume = {299}, journal = {Colloid and Polymer Science}, publisher = {Springer}, doi = {10.1007/s00396-020-04784-4}, pages = {955 -- 967}, abstract = {In order to function as soft actuators, depending on their field of use, magnetorheological elastomers (MREs) must fulfill certain criteria. To name just a few, these can include rapid response to external magnetic fields, mechanical durability, mechanical strength, and/or large deformation. Of particular interest are MREs which produce macroscopic deformation for small external magnetic field variations. This work demonstrates how this can be achieved by just a small change in magnetic field orientation. To achieve this, (super)paramagnetic nickel particles of size ≈ 160 μm were embedded in a non-magnetic polydimethylsiloxan (PDMS) (661-1301 Pa) and their displacement in a stepwise rotated magnetic field (170 mT) recorded using a video microscope. Changes in particle aggregation resulting from very small variations in magnetic field orientation led to the observation of a new strongly magneto-active effect. This configuration is characterized by an interparticle distance in relation to the angle difference between magnetic field and particle axis. This causes a strong matrix deformation which in turn demonstrates hysteresis on relaxation. It is shown that the occurrence strongly depends on the particle size, particle distance, and stiffness of the matrix. Choosing the correct parameter combination, the state can be suppressed and the particle-matrix system demonstrates no displacement or hysteresis. In addition, evidences of non-negligible higher order magnetization effects are experimentally ascertained which is qualitatively in agreement with similar, already theoretically described, particle systems. Even at larger particle geometries, the new strongly magneto-active configuration is preserved and could create macroscopic deformation changes.}, language = {en} } @inproceedings{SeflProchazkaHalleretal., author = {Sefl, Ondrej and Prochazka, Radek and Haller, Rainer and Monkman, Gareth J.}, title = {Alternative Approach to Optical Detection of Partial Discharges in Air}, series = {2021 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP): 12-15 Dec. 2021, Vancouver, BC, Canada}, booktitle = {2021 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP): 12-15 Dec. 2021, Vancouver, BC, Canada}, publisher = {IEEE}, isbn = {978-1-6654-1907-9}, issn = {2576-2397}, doi = {10.1109/CEIDP50766.2021.9705350}, pages = {324 -- 327}, abstract = {This article compares the standard electrical method of partial discharge detection with a novel optical detection method based on silicon photomultipliers. A third, complementary, single-loop antenna method is added to represent the ultra-high frequency method commonly used in gas-insulated switchgear/lines. A trio of air-insulated electrode designs that simulate the fundamental fault/discharge types in gaseous insulation (protrusion - corona discharge, floating conductive particle, surface discharges) are employed. Phase-resolved partial discharge activity patterns are compiled for each electrode design. The patterns are analyzed using spatial statistics and the interpretation of the obtained data trends explained by means of an example. Ultimately, the consistency and reliability of discharge detection by the optical methods for each fault/discharge type are evaluated, and suggestions for improvement are made.}, language = {en} } @inproceedings{SindersbergerPremMonkmanetal.2021, author = {Sindersberger, Dirk and Prem, Nina and Monkman, Gareth J. and Zimmermann, Klaus}, title = {Self-Sensing Electroadhesive Polymer Gripper with Magnetically Controllable Surface Geometry}, series = {Actuator 2021, International Conference and Exhibition on New Actuator Systems and Applications: GMM conference, February 17-19, 2021, online event}, booktitle = {Actuator 2021, International Conference and Exhibition on New Actuator Systems and Applications: GMM conference, February 17-19, 2021, online event}, editor = {Schlaak, Helmut}, publisher = {VDE VERLAG}, address = {Berlin; Offenbach}, isbn = {9783800754540}, doi = {10.1002/macp.201800222}, pages = {318 -- 320}, year = {2021}, abstract = {Compared to conventional end effectors, electro-adhesive grippers enable the handling of sensitive, soft or air-permeable materials [1]. The prehension force is based on a strong electric field generated by electrodes resulting in a polarisation of the dielectric and the generation of mirror charges in the workpiece. When the electrode supply voltage is deactivated, the electric field drops,but an electrostatic field remains due to remanent polarisation of the dielectric. The residual charge on the gripper surface reduces only slowly and in combination with other influencing factors can prevent the workpieces from being ejected temporarily or completely. In this work a solution to this problem is presented by means of gripper surface deforming caused by the applicat ion of a magnetic field to a magneto- active polymer (MAP) actuator. The in-creased distance between the workpiece and the dielectric enables precise and controlled ejection. In addition to compliance and deformability, the employment of soft smart materials enables the integration of self-sens-ing mechanisms for the measurement of surface deformation. The embedding of electrically conductive flexible electrodes within the soft silicone dielectric sup port such movements and serves as the n ecessary electrodes for electroadhesion. Since the implementation of the end effectoris based entirely on soft materials, the self-sensing magnetically controllable electroadhesive gripper (SMEG) can be produced in a shape deposition manufacturing (SDM) process [2], [3] and is highly applicable to the field of soft robotics.}, language = {de} } @article{SorokinEckerStepanovetal., author = {Sorokin, Vladislav V. and Ecker, Eva and Stepanov, Gennady V. and Shamonin (Chamonine), Mikhail and Monkman, Gareth J. and Kramarenko, Elena Yu and Khokhlov, Alexei R.}, title = {Experimental study of the magnetic field enhanced Payne effect in magnetorheological elastomers}, series = {Soft Matter}, volume = {10}, journal = {Soft Matter}, number = {43}, publisher = {ROYAL Society of CHEMISTRY}, doi = {10.1039/c4sm01738b}, pages = {8765 -- 8776}, abstract = {The dynamic modulus and the loss factor of magnetorheological elastomers (MREs) of various compositions and anisotropies are studied by dynamic torsion oscillations performed in the absence and in the presence of an external magnetic field. The emphasis is on the Payne effect, i.e. the dependence of the elastomer magnetorheological characteristics on the strain amplitude and their evolution with cyclically increasing and decreasing strain amplitudes. MREs are based on two silicone matrices differing in storage modulus (soft, G' similar to 10(3) Pa, and hard, G' similar to 10(4) Pa, matrices). For each matrix, the concentration of carbonyl iron particles with diameters of 3-5 mu m was equal to 70 and 82 mass\% (22 and 35 vol\%, respectively) in the composite material. Samples for each filler content, isotropic and aligned-particles, are investigated. It is found that the Payne effect significantly increases in the presence of an external magnetic field and varies with the cyclical loading which reaches saturation after several cycles. The results are interpreted as the processes of formation-destruction-reformation of the internal filler structure under the simultaneously applied mechanical force and magnetic field. Impacts of matrix elasticity and magnetic interactions on the filler alignment are elucidated.}, language = {en} } @article{ChenSongZhangetal., author = {Chen, Rui and Song, Ruizhou and Zhang, Zhuo and Bai, Long and Liu, Fuqiang and Jiang, Pei and Sindersberger, Dirk and Monkman, Gareth J. and Guo, Jianglong}, title = {Bio-Inspired Shape-Adaptive Soft Robotic Grippers Augmented with Electroadhesion Functionality}, series = {Soft Robotics}, volume = {6}, journal = {Soft Robotics}, number = {6}, publisher = {Mary Ann Liebert}, doi = {10.1089/soro.2018.0120}, pages = {701 -- 712}, abstract = {Soft robotic grippers (SRGs) have been extensively employed in robotic grasping and manipulation applications due to the fact that they are beneficial for pick-and-place of difficult-to-handle and delicate objects with various geometries and stiffness in a comfortable and safer way. This article presents a bio-inspired and shape-adaptive SRG augmented with electroadhesion (EA) functionality, FinEA, by a cost-effective combination of a Fin Ray structured two-fingered SRG with two soft-stretchable EA pads. The EA pads were manufactured by screen printing a layer of electrically conductive and elastomeric carbon black powder mixed with polydimethylsiloxane onto a dielectric substrate. The compliant Fin Ray fingers, composed of soft longitudinal beams and rigid cross beams, were structurally optimized by the finite element method using ABAQUS/CAE based on three key parameters: the open angle of the longitudinal beams, the spacing between the cross beams, and the incline angle of the cross beams. The soft beams were produced by a traditional soft lithography method, whereas the rigid cross beams were three-dimensionally printed. The resultant FinEA grippers were capable of lifting not only flat/thin materials without distorting them due to the employment of EA, but also concave and convex objects due to the passively shape-adaptive Fin Ray structure and the EA functionality. In addition, the proposed FinEA grippers were able to grasp delicate materials and objects whose diameters are larger than the overall gripper length. Furthermore, 65\% more weight in shear were picked up by the FinEA gripper when 4 kV was applied compared with 0 V. The FinEA concept provides useful and alternative solution for controllable adhesion-based SRGs and may facilitate the inspiration and development of future SRGs with added functionality and enhanced versatility.}, language = {en} } @article{DiermeierSindersbergerAngeleetal., author = {Diermeier, Andreas and Sindersberger, Dirk and Angele, Peter and Kujat, Richard and Monkman, Gareth J.}, title = {Sensor system for use with low intensity pulsed ultrasound}, series = {Sensor review}, volume = {39}, journal = {Sensor review}, number = {6}, publisher = {Emerald}, issn = {0260-2288}, doi = {10.1108/SR-11-2018-0304}, pages = {828 -- 834}, abstract = {Purpose Ultrasound is a well-established technology in medical science, though many of the conventional measurement systems (hydrophones and radiation force balances [RFBs]) often lack accuracy and tend to be expensive. This is a significant problem where sensors must be considered to be "disposable" because they inevitably come into contact with biological fluids and expense increases dramatically in cases where a large number of sensors in array form are required. This is inevitably the case where ultrasound is to be used for the in vitro growth stimulation of a large plurality of biological samples in tissue engineering. Traditionally only a single excitation frequency is used (typically 1.5 MHz), but future research demands a larger choice of wavelengths for which a single broadband measurement transducer is desirable. Furthermore, because of implementation conditions there can also be large discrepancies between measurements. The purpose of this paper deals with a very cost-effective alternative to expensive RFBs and hydrophones. Design/methodology/approach Utilization of cost-effective piezoelectric elements as broadband sensors. Findings Very effective results with equivalent (if not better) accuracy than expensive alternatives. Originality/value This paper concentrates on how very cost-effective piezoelectric ultrasound transducers can be implemented as sensors for ultrasound power measurements with accuracy as good, if not better than those achievable using radiation force balances or hydrophones.}, language = {en} } @article{SindersbergerPremMonkman, author = {Sindersberger, Dirk and Prem, Nina and Monkman, Gareth J.}, title = {Self-assembling structure formation in low-density magnetoactive polymers}, series = {Journal of Applied Polymer Science}, volume = {137}, journal = {Journal of Applied Polymer Science}, number = {3}, publisher = {Wiley}, doi = {10.1002/app.48291}, abstract = {The formation of microstructures in magnetoactive polymers (MAPs) is a recently discovered phenomenon found only with very low filler particle concentrations (less than 3 wt \%). Due to the degassing process, filler particles collect around an ascending bubble, which dissolves at a certain point leaving particulate rings within the matrix. The formation of toroidal microstructures commences as filler concentration approaches 1 wt \%. The development of coherent parallel aligned rings with a compact order continues as particle concentrations increase toward 2 wt \%. Between 2 and 3 wt \% capillary doublets develop, while mass percentages higher than 3\% result in increasing entropy as the random order of particle agglomeration found in higher concentration MAP dominates. Self-structured samples of different filler material and concentrations between 1 and 3 wt \% have been investigated using X-ray tomography, where the emerging structures can be observed and visualized. The ring structures resulting from this research represent microinductivities which can be fabricated in a targeted manner, thus enabling new applications in the high-frequency radio field. Furthermore, these anisotropic, but well-organized, structures have magnetic field-dependent implications for optical, thermal, acoustic, and medical applications.}, language = {en} } @inproceedings{EgersdoerferZeidlerWieseretal., author = {Egersd{\"o}rfer, Stefan and Zeidler, A. and Wieser, A. and Trompier, F. and Monkman, Gareth J. and Shamonin (Chamonine), Mikhail}, title = {A portable accident dosimeter using tooth enamel}, series = {Proceedings of the 7th International Symposium on EPR Dosimetry and Applications and the 2nd International Conference on Biodosimetry held at the Uniformed Services University of the Health Sciences, Bethesda, MD, USA, 10-13 July 2006}, booktitle = {Proceedings of the 7th International Symposium on EPR Dosimetry and Applications and the 2nd International Conference on Biodosimetry held at the Uniformed Services University of the Health Sciences, Bethesda, MD, USA, 10-13 July 2006}, publisher = {Pergamon}, address = {Oxford}, language = {en} } @book{MonkmanHesseSteinmannetal., author = {Monkman, Gareth J. and Hesse, Stefan and Steinmann, Ralf and Schunk, Henrik}, title = {Robot Grippers}, publisher = {Wiley}, isbn = {9783527406197}, doi = {10.1002/9783527610280}, abstract = {Since robotic prehension is widely used in all sectors of manufacturing industry, this book fills the need for a comprehensive, up-to-date treatment of the topic. As such, this is the first text to address both developers and users, dealing as it does with the function, design and use of industrial robot grippers. The book includes both traditional methods and many more recent developments such as micro grippers for the optolectronics industry. Written by authors from academia, industry and consulting, it begins by covering the four basic categories of robotic prehension before expanding into sections dealing with endeffector design and control, robotic manipulation and kinematics. Later chapters go on to describe how these various gripping techniques can be used for a common industrial aim, with details of related topics such as: kinematics, part separation, sensors, tool excahnge and compliance. The whole is rounded off with specific examples and case studies. With more than 570 figures, this practical book is all set to become the standard for advanced students, researchers and manufacturing engineers, as well as designers and project managers seeking practical descriptions of robot endeffectors and their applications.}, language = {en} } @article{SorokinStepanovShamoninChamonineetal., author = {Sorokin, Vladislav V. and Stepanov, Gennady V. and Shamonin (Chamonine), Mikhail and Monkman, Gareth J. and Kramarenko, Elena Yu}, title = {Magnetorheological behavior of magnetoactive elastomers filled with bimodal iron and magnetite particles}, series = {Smart materials and structures}, volume = {26}, journal = {Smart materials and structures}, number = {3}, publisher = {IOP Publishing}, doi = {10.1088/1361-665X/26/3/035019}, abstract = {Magnetoactive elastomers (MAE) based on soft silicone matrices, filled with various proportions of large diameter ( approximately 50 mu m) iron and small diameter ( approximately 0.5 mu m) magnetite particles are synthesized. Their rheological behavior in homogeneous magnetic fields up to 600 mT is studied in detail. The addition of small magnetite particles facilitates fabrication of uniformly distributed magnetic elastomer composites by preventing aggregation and sedimentation of large particles during curing. It is shown that using the proposed bimodal filler particles it is possible to tailor various magnetorheological (MR) properties which can be useful for different target applications. In particular, either absolute or relative magnetorheological effects can be tuned. The value of the damping factor as well as the range of deformation amplitudes for the linear viscoelastic regime can be chosen. The interdependencies between different MR properties of bimodal MAEs are considered. The results are discussed in the model framework of particle network formation under the simultaneous influence of external magnetic fields and mechanical deformation.}, language = {en} } @article{SindersbergerDiermeierPremetal., author = {Sindersberger, Dirk and Diermeier, Andreas and Prem, Nina and Monkman, Gareth J.}, title = {Printing of hybrid magneto active polymers with 6 degrees of freedom}, series = {Materials today communications}, volume = {15}, journal = {Materials today communications}, number = {June}, publisher = {Elsevier}, doi = {10.1016/j.mtcomm.2018.02.032}, pages = {269 -- 274}, abstract = {3D printing techniques offer a versatile method for the fabrication and structuring of magnetoactive polymer (MAP) components and devices for research prototype development. MAP materials enjoy an advantage in that the particulate content may be manipulated by external magnetic fields during the forming and curing processes. Controlled particle diffusion within the polymer matrix, by means of external fields applied during the printing process, influences a further three spatial dimensions. This permits control of the spatial particle concentration and makes free displacement of particle accumulations possible during the crosslinking phase. Particles which are susceptible to electric or magnetic fields can thereby be shifted into regions previously free of particles. The additional 3 graded dispersion axes effectively results in what can be described as 6 degrees of freedom (6DOF) printing. Electrically conductive polymers combined with non-conductive areas, provide an additional benefit for the production of complex hybrid structures. This may be augmented by the combination of magnetically active thermoplastics as inelastic structural components together with mechanically deformable elastomers. The combination of all fabrication methods in one hybrid printing process makes the production of complex sensor and actuator systems in one manufacturing sequence possible. This far exceeds the capabilities of conventional casting and machining operations and opens new possibilities for the fabrication of soft material elements.}, language = {en} } @article{StollMayerMonkmanetal., author = {Stoll, Andrea and Mayer, Matthias and Monkman, Gareth J. and Shamonin (Chamonine), Mikhail}, title = {Evaluation of highly compliant magneto-active elastomers with colossal magnetorheological response}, series = {Journal of applied polymer science}, journal = {Journal of applied polymer science}, publisher = {Wiley}, address = {New York, NY}, issn = {1097-4628}, doi = {10.1002/app.39793}, abstract = {Highly compliant elastomers with a shear storage modulus as low as 25 Pa are prepared using commercially available silicone, plasticizer, and tactile mutator silicone additive. They are used as matrix material for magneto-active elastomers (MAEs) with carbonyl iron contents between 0 and 85 wt \%. In the absence of an external magnetic field, the storage modulus of MAEs based on two selected mixtures ranges between ~100 Pa and ~2000 Pa. Addition of a mutator to the matrix mixture results in a long post-cure period depending on the curing temperature and the initial mixture. In the presence of a magnetic field, the presented MAEs exhibit a strong magneto-induced change in storage modulus resulting in a colossal magnetorheological effect of >106 \% which is ~30 times higher than previously reported values. The results are of interest in applications using such elastomers as cell substrates with magnetically tunable rigidity.}, language = {en} } @article{FuechtmeierEgersdoerferMaietal., author = {F{\"u}chtmeier, Bernd and Egersdoerfer, Stefan and Mai, Ronny and Hente, Rainer and Dragoi, Daniel and Monkman, Gareth J. and Nerlich, Michael}, title = {Reduction of femoral shaft fractures in vitro by a new developed reduction robot system "RepoRobo"}, series = {Injury}, volume = {35}, journal = {Injury}, number = {1, Supplement}, publisher = {Elsevier}, organization = {Elsevier}, issn = {1879-0267}, doi = {10.1016/j.injury.2004.05.019}, pages = {113 -- 119}, abstract = {Closed reduction of the long bones is associated with the use of considerable force. This force must be maintained for the reduction maneuver and fixation process. At present, apart from the extension table or the large AO distractor, only rather inadequate reduction aids are available. A solution to this problem is being sought in the form of a robotic system with which precision can be improved and the holding effort reduced. In the research project presented here, a synthetic femur with integrated tensioned mainspring and a 32-A3 type fracture served as a bone reduction model. The fracture was stabilized with a standard AO fixator. A St{\"a}ubli robot (model RX130) was converted by appropriate modification so that it could be used for the reduction of femoral shaft fractures in vitro. The robot was equipped with a pneumatic 2-fingered gripper, on which the fingers have been modified so that they can grip the AO fixator clamp. A Force-Feedback-Sensor was inserted between the gripper and the robot to obtain online recordings of the forces and moments in all three axes. With this setup it is possible to achieve precise reduction of the fracture in all planes under visual control.}, language = {en} } @article{Monkman, author = {Monkman, Gareth J.}, title = {Advances in Shape Memory Polymer Actuation}, series = {Mechatronics}, volume = {10}, journal = {Mechatronics}, number = {4/5}, publisher = {Elsevier}, address = {Amsterdam}, issn = {1873-4006}, doi = {10.1016/S0957-4158(99)00068-9}, pages = {489 -- 498}, abstract = {Shape memory materials fulfill an important role in both actuation and mechanical coupling between actuators and associated dynamic systems. The simplest techniques are thermally based and in addition to the more common shape memory alloys there are also shape memory polymers. These have similar characteristics to those of their metallic cousins, but there the relationship stops. The basic physical principles are very different and this paper attempts to outline the current state-of-the-art to those already involved with the technology and perhaps open a fresh chapter in smart materials to those who are new to it.}, language = {en} } @inproceedings{BoodyBickelKempfetal., author = {Boody, F. P. and Bickel, Peter and Kempf, J. and Monkman, Gareth J. and H{\"o}pfl, R. and Hora, H. and Laska, L. and Krasa, J. and Pfeifer, M. and Rohlena, K. and Juha, L. and Wolowski, J. and Badziak, J. and Parys, P. and Ryc, L. and Worya, E. and Szydlowski, A. and Torrisi, L. and Gammino S., and Mezzasalma, A.}, title = {Flexible laser ion sources for surface modification}, series = {Plasma Production by Laser Ablation, PPLA 2003 : Messina and Catania, Italy, 18-19 September 2003}, booktitle = {Plasma Production by Laser Ablation, PPLA 2003 : Messina and Catania, Italy, 18-19 September 2003}, publisher = {World Scientific Publishing}, address = {Singapore}, language = {en} } @article{Monkman, author = {Monkman, Gareth J.}, title = {Precise Piezoelectric Prehension}, series = {Industrial Robot}, volume = {27}, journal = {Industrial Robot}, number = {3}, publisher = {MCB University Press}, issn = {0143-991x}, doi = {10.1108/01439910010371605}, pages = {189 -- 194}, abstract = {Piezoelectric actuators are well established for use in expensive optical equipment. Within the last decade, relatively inexpensive piezoelectric actuators have become established technology in pneumatic switching and the first piezoelectrically driven impactive robot grippers are just starting to emerge. Although this article concentrates largely on the use of piezoelectric actuators for use in robot gripping systems, the potential for applications outside this field is immense.}, language = {en} } @article{Monkman, author = {Monkman, Gareth J.}, title = {Workpiece Retention during Machine Processing}, series = {Assembly Automation}, volume = {21}, journal = {Assembly Automation}, number = {1}, publisher = {Emerald}, address = {Bringley}, issn = {1758-4078}, doi = {10.1108/01445150110381754}, pages = {61 -- 67}, abstract = {Discusses the failings of conventional fixturing systems such as jigs and clamps and describes how electrorheological fluids can be used for flexible fixturing and workpiece retention.}, language = {en} } @article{Monkman, author = {Monkman, Gareth J.}, title = {Special Issue on Miniature Actuators}, series = {Mechatronics}, volume = {10}, journal = {Mechatronics}, number = {4/5}, publisher = {Elsevier}, doi = {10.1016/S0957-4158(99)00061-6}, pages = {429 -- 430}, language = {en} } @inproceedings{Monkman, author = {Monkman, Gareth J.}, title = {Auswirkungen der Mechatronik auf die Entwicklungsmethodik}, series = {Mechatronik Forum, OTTI, Handelskammer Regensburg, 25.-26. Oktober 2000}, booktitle = {Mechatronik Forum, OTTI, Handelskammer Regensburg, 25.-26. Oktober 2000}, language = {de} } @inproceedings{KreitmeierSchulzMonkmanetal., author = {Kreitmeier, Florian and Schulz, Irene and Monkman, Gareth J. and Shamonin (Chamonine), Mikhail and Fetisov, Yuri K. and Chashin, Dmitri V. and Fetisov, Leonid Y.}, title = {Observation of Nonlinear Magnetoelectric Response to Magnetic Pulses in Layered Magnetostrictive-Piezoelectric Structures}, publisher = {IEEE}, doi = {10.1109/ISAF.2012.6297739}, abstract = {A detailed experimental study of the magnetoelectric response of planar bi- and symmetric trilayer composite structures to magnetic field pulses is reported. The structures consist of layers of commercially available piezoelectric (lead zirconate titanate) and magnetostrictive (permendur or nickel) materials. The magnetic-field pulses have the form of a half-wave sine function with duration of 450 μs and amplitude from 500 Oe up to 38 kOe. The measurement method is explained and the measured time dependence of the resulting voltage is presented. The most interesting case, when pulse amplitudes are sufficiently large (~ 1-10 kOe) and various types of acoustic oscillation with frequencies much larger than the reciprocal pulse length are excited in the structures, is considered. The dependencies of the magnetoelectric voltage coefficient on the excitation frequency and the applied magnetic field are calculated. By digital signal processing the results are compared with those obtained by the method of harmonic field modulation (HFM). The findings are of interest for developing magnetoelectric sensors for pulsed magnetic fields as well as for rapid characterization of magnetoelectric composite structures.}, language = {en} } @article{HirmerDanilovGiglbergeretal., author = {Hirmer, Marion and Danilov, Sergey N. and Giglberger, Stephan and Putzger, J{\"u}rgen and Niklas, Andreas and J{\"a}ger, Andreas and Hiller, Karl-Anton and Schmalz, Gottfried and Redlich, Britta and Schulz, Irene and Monkman, Gareth J. and Ganichev, Sergey D.}, title = {Spectroscopic Study of Human Teeth and Blood from Visible to Terahertz Frequencies for Clinical Diagnosis of Dental Pulp Vitality}, series = {Journal of Infrared, Millimeter, and Terahertz Waves}, volume = {33}, journal = {Journal of Infrared, Millimeter, and Terahertz Waves}, publisher = {Springer}, issn = {1866-6906}, doi = {10.1007/s10762-012-9872-3}, pages = {366 -- 375}, abstract = {Transmission spectra of wet human teeth and dentin slices, together with blood of different flow rates were investigated. The measurements carried out over a wide spectral range, from visible light down to terahertz radiation. The results make it possible to find the optimum light frequency for an all-optical determination of pulpal blood flow and, consequently, for clinically diagnosis of tooth vitality.}, language = {en} } @inproceedings{SchulzPutzgerNiklasetal., author = {Schulz, Irene and Putzger, J{\"u}rgen and Niklas, Andreas and Brandt, M. and J{\"a}ger, Andreas and Hardt, A. and Kn{\"o}rzer, S. and Hiller, Karl-Anton and L{\"o}ffler, S. and Schmalz, Gottfried and Danilov, Sergey N. and Giglberger, Stephan and Hirmer, Marion and Ganichev, Sergey D. and Monkman, Gareth J.}, title = {PPG signal acquisition and analysis on in vitro tooth model for dental pulp vitality assessmen}, series = {2nd Applied Research Conference 2012 (ARC 2012), 25./26. June 2012, Nuremberg}, booktitle = {2nd Applied Research Conference 2012 (ARC 2012), 25./26. June 2012, Nuremberg}, publisher = {Shaker-Verlag}, address = {Aachen}, organization = {ARC}, pages = {142 -- 146}, language = {en} } @inproceedings{ZappaMonkmanEgersdoerferetal., author = {Zappa, O. and Monkman, Gareth J. and Egersd{\"o}rfer, Stefan and Datzer, G. and Kahled, W. and B{\"o}se, Holger and Tunayar, A.}, title = {High Voltage Switching using Bulk GaAs}, series = {Actuator 2004 : 9th International Conference on New Actuators \& 3rd International Exhibition on Smart Actuators and Drive Systems, 14-16 June 2004, Bremen, Germany}, booktitle = {Actuator 2004 : 9th International Conference on New Actuators \& 3rd International Exhibition on Smart Actuators and Drive Systems, 14-16 June 2004, Bremen, Germany}, publisher = {HVG Hanseatische Veranstaltungs-GmbH}, address = {Bremen}, language = {en} } @inproceedings{Monkman, author = {Monkman, Gareth J.}, title = {Sensors and Actuators in Automation}, series = {Ostbayerisches Fachforum f{\"u}r Mechatronik, Roding, 16. M{\"a}rz 2001}, booktitle = {Ostbayerisches Fachforum f{\"u}r Mechatronik, Roding, 16. M{\"a}rz 2001}, language = {en} } @article{Monkman, author = {Monkman, Gareth J.}, title = {Electroadhesive Microgrippers}, series = {Assembly Automation}, volume = {24}, journal = {Assembly Automation}, number = {1}, publisher = {MCB University Press}, pages = {326 -- 330}, language = {en} } @article{PetcharteeMonkman, author = {Petchartee, Somrak and Monkman, Gareth J.}, title = {Optimisation of Prehension Force through Tactile Sensing}, series = {Industrial Robot}, volume = {35}, journal = {Industrial Robot}, number = {4}, publisher = {MCB Univ. Press}, address = {Bradford}, doi = {10.1108/01439910810876454}, pages = {361 -- 368}, abstract = {Purpose The purpose of this paper is to analyze surface deformations caused by shear and moment forces on tactile materials and present a method to detect and reduce the risk of slippage by controlling the normal force as measured by tactile sensor arrays. Design/methodology/approach A predictive model has been proposed which uses a basic method adapted to real applications in grasp optimization. Prevention of premature release with minimum prehension force is addressed without the need to measure the coefficient of friction between object and robot gripper. Predictive models have been used to develop a set of rules which predict the pre-slip based on fluctuations in tactile signal data. Findings The tactile sensors can be used in a "nonlinear" manner during manipulation tasks. When the gripper finger first makes contact with an object, the stress distribution under the finger skin varies rapidly. Predictive models have been used to develop a set of rules which predict the pre-slip based on fluctuations in tactile signal data. Pre-slip at the contact area just prior to object movement produces rapid but detectable stress transients. Originality/value Tactile sensors do not measure stress generated by a contact with an object directly, but instead measure strain in an interposed compliant, polymeric medium intended for sensor protection and prehension assistance. Reliable detection of pre-slip has hitherto eluded researchers using such tactile techniques.}, language = {en} } @incollection{PetcharteeMonkmanSuebsromran, author = {Petchartee, Somrak and Monkman, Gareth J. and Suebsromran, Anan}, title = {3D-Shape Recognition based Tactile Sensor}, series = {Smart Sensors and Sensing Technology}, booktitle = {Smart Sensors and Sensing Technology}, editor = {Mukhopadhyay, S.C. and Gupta, G.S.}, publisher = {Springer}, address = {Berlin ; Heidelberg}, isbn = {978-3-540-79589-6}, doi = {10.1007/978-3-540-79590-2_21}, pages = {317 -- 332}, abstract = {A surface recognition algorithm capable of determining contact surfaces types by means of tactile sensor fusion is proposed. The authors present a recognition processes for 3-dimensional deformations in a 2-dimensional parametric domain. Tactile information is extracted by physical contact with a grasped object through a sensing medium. Information is obtained directly at the interface between the object and the sensing device and relates to three-dimensional position and orientation of the object in the presence of noise. The technique called "eigenvalue trajectory analysis", is introduced and adopted for specifying the margin of classification and classification thresholds. The authors demonstrate mathematically that this approach, which complements existing work, offers significant computational advantages when applied to challenging contact scenarios such as dynamic recognition of contact deformations.}, language = {en} } @inproceedings{PetcharteeMonkman, author = {Petchartee, Somrak and Monkman, Gareth J.}, title = {3D-Shape Recognition based Tactile Sensor}, series = {ICST 2007, Proceedings of 2nd International Conference on Sensing Technology : Massey University, Palmerston North, New Zealand, November 26 - 28, 2007}, booktitle = {ICST 2007, Proceedings of 2nd International Conference on Sensing Technology : Massey University, Palmerston North, New Zealand, November 26 - 28, 2007}, publisher = {Inst. of Information Sciences and Techn., Massey Univ.}, address = {Palmerston}, pages = {56 -- 61}, language = {en} } @article{PetcharteeMonkman, author = {Petchartee, Somrak and Monkman, Gareth J.}, title = {Pre-slip Sensing through Tactile Sensing}, series = {Sensors \& Transducers}, volume = {90}, journal = {Sensors \& Transducers}, number = {4, Special Issue}, publisher = {International Frequency Sensor Association (IFSA)}, issn = {1726-5479}, pages = {310 -- 324}, language = {en} } @inproceedings{SchummSchwarzWahleretal., author = {Schumm, M. and Schwarz, E. and Wahler, D. and Jayaprakash, S. N. and Monkman, Gareth J.}, title = {The Trilopede}, series = {Informatics Microsystems Information Systems Preceedings}, volume = {1}, booktitle = {Informatics Microsystems Information Systems Preceedings}, number = {1}, publisher = {Moscow State Technical University}, language = {en} } @inproceedings{PetcharteeMonkman, author = {Petchartee, Somrak and Monkman, Gareth J.}, title = {Contact Identification using Tactile Arrays}, series = {Proceedings of the 7th IEEE International Symposium on Signal Processing and Information Technology (ISSPIT 2007), 15.-18.12.2007, Giza, Egypt}, booktitle = {Proceedings of the 7th IEEE International Symposium on Signal Processing and Information Technology (ISSPIT 2007), 15.-18.12.2007, Giza, Egypt}, publisher = {IEEE}, doi = {10.1109/ISSPIT.2007.4458144}, pages = {1121 -- 1126}, abstract = {The proposed method allows a robot to quantify tactile recognition of grasped objects. The responses by the robot are matched by randomly introducing objects following the completion of tactile sensor based training phases on 4 specific objects. The reproduction of the robotic contact identification is accomplished by matching threshold values of the smallest eigenvalue of the Quadric surface - called the eigenvalue trajectory. Once the grasped objects are introduced to the 2-fingered robot hand, the eigenvalue trajectory of contact surfaces are calculated by the system. Calculations are based on the degree of similarity of the characteristics between the newly received and previously trained tactile data. Experimental results indicate that the proposed algorithm allows a successful quantification of robotic contact recognition and the accomplishment of high levels of accuracy in contact identification. These results confirm that the proposed method is useful for identifying contact surfaces based on tactile sensor data.}, language = {en} } @inproceedings{PetcharteeMonkman, author = {Petchartee, Somrak and Monkman, Gareth J.}, title = {Contact Classification using Tactile Arrays}, series = {2007 3rd International Conference on Intelligent Sensors, Sensor Networks and Information (ISSNIP), 3, 03.-06.12.2007, Melbourne, VIC, Australia}, booktitle = {2007 3rd International Conference on Intelligent Sensors, Sensor Networks and Information (ISSNIP), 3, 03.-06.12.2007, Melbourne, VIC, Australia}, doi = {10.1109/ISSNIP.2007.4496848}, pages = {227 -- 232}, abstract = {This paper proposed a contact recognition algorithm capable of determining contact surfaces types by tactile sensor fusion. This algorithm can recognize grasped objects using a 2- fingered robot hand, on which tactile sensors are mounted. Experiments have demonstrated reliable surface classification and accurate transformation independent of object shape and orientation. The contribution of this paper regards the relations between a surface and the points cloud defining it. Particularly, we investigate on the possibility that there is some intrinsic feature of a points cloud under quadric surface, allowing us to discriminate or classify a dataset defining a surface from the acquisition noise.}, language = {en} } @article{PetcharteeMonkman, author = {Petchartee, Somrak and Monkman, Gareth J.}, title = {Contact Recognition using Tactile Sensor}, series = {Annals Universitaria Craiova-Series: Automation, Computers, Electronics and Mechatronics}, volume = {4 (31)}, journal = {Annals Universitaria Craiova-Series: Automation, Computers, Electronics and Mechatronics}, number = {2}, pages = {103 -- 108}, abstract = {The surface recognition algorithm that determines the types of contact surfacesby fusing information collected by the tactile sensor system is proposed. The tactilesystem will be determined from the shape of the object image which can then becharacterized using the mathematical properties of Quadric surface. This algorithm canrecognize 3-D objects using a 2-fingered robot gripper, on which tactile sensors aremounted. Experiments have demonstrated the reliability of the surface classificationmethod and the accuracy of transformations independent of an object's shape, translationand rotation.}, language = {en} } @article{PetcharteeMonkman, author = {Petchartee, Somrak and Monkman, Gareth J.}, title = {Optimisation of Prehension Force through Tactile Sensing}, series = {Journal of Advanced Manufacturing Technology}, journal = {Journal of Advanced Manufacturing Technology}, publisher = {Universiti Teknikal Malaysia Melaka}, issn = {2289-8107}, language = {en} } @article{PetcharteeMonkman, author = {Petchartee, Somrak and Monkman, Gareth J.}, title = {Contact Recognition through Tactile Sensing}, series = {ACTA Universitatis Apulensis; Seria Mathematics-Informatics}, journal = {ACTA Universitatis Apulensis; Seria Mathematics-Informatics}, publisher = {Department of Mathematics and Informatics}, address = {Alba Iulia}, issn = {1582-5329}, language = {en} } @inproceedings{PetcharteeMonkman, author = {Petchartee, Somrak and Monkman, Gareth J.}, title = {Contact Recognition using Tactile Sensor}, series = {Proc. International Symposium on System Theory, Automation, Robotics, Computers, Informatics, Electronics and Instrumentation (SINTES13), Romania}, booktitle = {Proc. International Symposium on System Theory, Automation, Robotics, Computers, Informatics, Electronics and Instrumentation (SINTES13), Romania}, pages = {285 -- 290}, language = {en} } @inproceedings{PetcharteeMonkman, author = {Petchartee, Somrak and Monkman, Gareth J.}, title = {Pre-slip detection based Tactile Sensing}, series = {Proc. 3rd International Conference on Intelligent Sensors, Sensor Networks and Information Processing (ISSNIP 2007), Melbourne}, booktitle = {Proc. 3rd International Conference on Intelligent Sensors, Sensor Networks and Information Processing (ISSNIP 2007), Melbourne}, pages = {233 -- 238}, language = {en} } @inproceedings{PetcharteeMonkman, author = {Petchartee, Somrak and Monkman, Gareth J.}, title = {Contact classification using tactile arrays}, series = {Proc. International Conference on Engineering \& ICT 2007 (ICEI 2007), 27th to 29th November 2007, Malacca, Malaysia}, booktitle = {Proc. International Conference on Engineering \& ICT 2007 (ICEI 2007), 27th to 29th November 2007, Malacca, Malaysia}, language = {en} } @inproceedings{PetcharteeMonkman, author = {Petchartee, Somrak and Monkman, Gareth J.}, title = {Optimisation of Prehension Force through Tactile Sensing}, series = {Proc. International Conference on Engineering \& ICT 2007 (ICEI 2007), Malaysia}, booktitle = {Proc. International Conference on Engineering \& ICT 2007 (ICEI 2007), Malaysia}, language = {en} } @article{PetcharteeMonkman, author = {Petchartee, Somrak and Monkman, Gareth J.}, title = {Slip Prediction through Tactile Sensing}, series = {Sensors \& Transducers}, volume = {90}, journal = {Sensors \& Transducers}, number = {Special Issue April 2008}, publisher = {International Frequency Sensor Association, IFSA}, issn = {1726-5479}, pages = {310 -- 324}, abstract = {This paper introduces a new way to predict contact slip using a resistive tactile sensor. The prototype sensor can be used to provide intrinsic information relating to geometrical features situated on the surface of grasped objects. Information along the gripper finger surface is obtained with a measurement resolution dependant on the number of discrete tactile elements. The tactile sensor predicts the partial slip of a tactile surface by sensing micro vibrations in tangential forces which are caused by an expansion of the slip regions within the contact area. The location of the local slip is not specified but its occurrence can be predicted immediately following micro vibration detection. Predictive models have been used to develop a set of rules which predict the slip based on fluctuations in tactile signal data.  }, language = {en} } @inproceedings{EgersdoerferSchummKessleretal., author = {Egersd{\"o}rfer, Stefan and Schumm, M. and Kessler, C. and Monkman, Gareth J. and B{\"o}se, Holger}, title = {Smart Fluids f{\"u}r die Schnittstelle Mensch-Maschine der Zukunft}, series = {International Mechatronik Forum, Linz}, booktitle = {International Mechatronik Forum, Linz}, pages = {421 -- 428}, language = {de} } @inproceedings{HecknerStrakaSchubertetal., author = {Heckner, T. and Straka, M. and Schubert, A. and Petchartee, Somrak and Monkman, Gareth J.}, title = {Entwicklung eines Navigationssystems f{\"u}r autonome mobile Robotersysteme}, series = {International Mechatronik Forum, Linz}, booktitle = {International Mechatronik Forum, Linz}, pages = {520 -- 527}, language = {de} } @misc{HesseMonkmanSteinmannetal., author = {Hesse, Stefan and Monkman, Gareth J. and Steinmann, Ralf and Schunk, Henrik}, title = {Robotergreifer}, publisher = {Hanser}, address = {M{\"u}nchen ; Wien}, isbn = {978-3-446-22920-4}, pages = {IX, 436 S.}, language = {de} } @inproceedings{PetcharteeMonkman, author = {Petchartee, Somrak and Monkman, Gareth J.}, title = {Pre-slip sensing using tactile sensor}, series = {Proceedings / SINTES 13, International Symposium on Systems Theory, Automation, Robotics, Computers, Informatics, Electronics and Instrumentation, October 18 - 20, 2007, Craiova - Romania}, booktitle = {Proceedings / SINTES 13, International Symposium on Systems Theory, Automation, Robotics, Computers, Informatics, Electronics and Instrumentation, October 18 - 20, 2007, Craiova - Romania}, pages = {279 -- 284}, language = {en} } @article{PetcharteeMonkman, author = {Petchartee, Somrak and Monkman, Gareth J.}, title = {Pre-slip sensing using tactile sensor}, series = {Annals Universitaria Criaiova-Series: Automation, Computers, Electronics and Mechatronics}, volume = {4 (31)}, journal = {Annals Universitaria Criaiova-Series: Automation, Computers, Electronics and Mechatronics}, number = {2}, pages = {109 -- 114}, language = {en} } @inproceedings{PetcharteeMonkman, author = {Petchartee, Somrak and Monkman, Gareth J.}, title = {Pre-slip Sensing through Tactile Sensing}, series = {Proc. 2nd International Conference on Sensing Technology (ICST 2007), New Zealand}, booktitle = {Proc. 2nd International Conference on Sensing Technology (ICST 2007), New Zealand}, pages = {62 -- 67}, language = {en} } @article{PremChavezVegaBoehmetal., author = {Prem, Nina and Chavez Vega, Jhohan Harvey and B{\"o}hm, Valter and Sindersberger, Dirk and Monkman, Gareth J. and Zimmermann, Klaus}, title = {Properties of Polydimethylsiloxane and Magnetoactive Polymers with Electroconductive Particles}, series = {Macromolecular Chemistry and Physics}, volume = {219}, journal = {Macromolecular Chemistry and Physics}, number = {18}, publisher = {Wiley}, doi = {10.1002/macp.201800222}, abstract = {Magnetoactive polymers are intelligent materials whose mechanical and electrical characteristics are reversibly influenced by external magnetic stimuli. They consist of a highly elastic polymer matrix in which magnetically soft and/or hard particles are distributed by means of special fabrication processes. In addition to ferromagnetic particles such as carbonyl iron powder, electrically conductive particles may also be embedded into the polymer matrix. After characterizing a range of compounds, this work focuses on a comparison of the electrical properties and the suitability of various materials for applications, with particular emphasis on integration into 3D and 6D printing processes. 6D printing is based on the selective positioning of particles in a 3D polymer matrix with a further three degrees of freedom for a graduated dispersion of the particles at certain points and in desired directions. The aim is therefore to ensure that the polymers containing electroconductive tracks have the best possible electrical properties, that is, low resistivity but are still capable of being printed. A comparison between the traditionally used compounds containing graphite and carbon black is made for the first time. This latter is found to be greatly superior both in terms of electrical conductivity and applicability to 3D printing and 6D printing.}, language = {en} } @article{BartschBehamGebhardtetal., author = {Bartsch, Alexander and Beham, Daniela and Gebhardt, Jakob and Ehrlich, Ingo and Schratzenstaller, Thomas and Monkman, Gareth J.}, title = {Mechanical Properties of NdPrFeB Based Magnetoactive Bisphenol-Free Boron-Silicate Polymers}, series = {Journal of Nanomedicine and Nanotechnology}, volume = {14}, journal = {Journal of Nanomedicine and Nanotechnology}, number = {6}, publisher = {Walsh Medical Media}, issn = {2157-7439}, doi = {10.35248/2157-7439.23.14.705}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-67425}, abstract = {Following a ban on many materials containing bisphenol-A, new bisphenol-free Boron silicates have been found as substitutes. The purpose of this study is to describe the mechanical properties of these bisphenol-free magnetoactive borosilicate polymers containing hard magnetic particles. Samples of 0\%, 33\% and 66\% by wt. were loaded for compression using a universal testing machine. The maximum forces occurring for different travel speeds were compared before and after post-magnetization treatments. The post-magnetization included 2 stages. In addition, the change in mechanical properties within 24 hours after the post-magnetization process was investigated. Furthermore, the influence of speed and particle content were investigated. In general, there is a correlation between the required compressive force and, the level of post-magnetization stress, the increase in travel speed and particle content in the boron silicate. Comparison of the non-post-magnetized and post-magnetized samples using two-tailed t-tests shows that the p-values for all weight fraction changes in NdPrFeB particles and travel speeds are less than 0.001. Also, a comparison between tests in which the traverse speed was varied also showed significant changes in the resulting compression forces. The same is valid for changes in the weight ratio of the NdPrFeB particles in the samples. For post-magnetized samples, no significant difference can be observed in the first 24 hours following magnetization. In summary, the material presents viscoelastic, plastic force-displacement behavior, which can be well recognized by its bi-linear curve shape. The investigation shows that borosilicate polymers based on NdPrFeB can have their mechanical behavior modified and controlled by post-magnetization processes. This opens new possibilities for many future applications.}, language = {en} } @unpublished{MalzSindersbergerMonkmanetal., author = {Malz, Sebastian and Sindersberger, Dirk and Monkman, Gareth J. and Steffens, Oliver and Kusterle, Wolfgang}, title = {Determination of the Water Content within Tunnel Linings to Assess Fire Safety}, series = {SSRN Electronic Journal}, journal = {SSRN Electronic Journal}, doi = {10.2139/ssrn.4390700}, pages = {22}, abstract = {Fires in tunnels are known to lead to explosive spalling of the tunnel linings, mainly due to rapid expansion of water as a result of vaporization in the concrete. In order to determine water content and assess fire safety within tunnel linings a novel measurement system has been developed. The development process includes the calibration of the sensor system via both direct and indirect approaches. This work compares both calibration methods and shows the differences that can occur due to measurement uncertainty. This work presents the measured water content within the Inntal tunnel, Austria as a representative tunnel from a total of four investigated tunnels. The obtained water content is compared to that found in the literature, and recommendations for practical work in terms of fire safety is given.}, language = {en} } @article{KnoerzerHillerBrandtetal., author = {Kn{\"o}rzer, S. and Hiller, Karl-Anton and Brandt, M. and Niklas, Andreas and Putzger, J{\"u}rgen and Monkman, Gareth J. and Danilov, Sergey N. and Ganichev, Sergey D. and Schulz, Irene and Schmalz, Gottfried}, title = {Detection of pulsed blood flow through a molar pulp chamber and surrounding tissue in vitro}, series = {Journal of Clinical Oral Investigations}, volume = {23}, journal = {Journal of Clinical Oral Investigations}, number = {3}, publisher = {Springer Nature}, doi = {10.1007/s00784-018-2530-y}, pages = {1121 -- 1132}, abstract = {OBJECTIVES Due to severe limitations of dental pulp sensitivity tests, the direct recording of pulsed blood flow, using photoplethysmography (PPG), has been proposed. In vivo evaluation is methodologically difficult and in vitro models have hitherto been adversely influenced by shortcomings in emulating the in vivo situation. Consequently, the aim of this study was to test an improved data acquisition system and to use this configuration for recording pulsed blood in a new model. MATERIALS AND METHODS We introduced a PPG signal detection system by recording signals under different blood flow conditions at two wavelengths (625 and 940 nm). Pulsed blood flow signals were measured using an in vitro model, containing a molar with a glass pulp and a resin socket, which closely resembled in vivo conditions with regard to volumetric blood flow, pulp anatomy, and surrounding tissue. RESULTS The detection system showed improved signal strength without stronger blanketing of noise. On the tooth surface, it was possible to detect signals emanating from pulsed blood flow from the glass pulp and from surrounding tissue at 625 nm. At 940 nm, pulp derived signals were recorded, without interference signals from surrounding tissue. CONCLUSION The PPG-based method has the potential to detect pulsed blood flow in small volumes in the pulp and (at 625 nm) also in adjacent tissues. CLINICAL RELEVANCE The results show the need for clear differentiation of the spatial origins of blood flow signals of any vitality test method to be applied to teeth.}, language = {en} } @article{ZimmermannBoehmBeckerTIetal., author = {Zimmermann, Klaus and B{\"o}hm, Valter and Becker T.I., and Chavez Vega, Jhohan Harvey and Kaufhold, Tobias and Monkman, Gareth J. and Sindersberger, Dirk and Diermeier, Andreas and Prem, Nina}, title = {Mechanical Characterization of the Field-Dependent Properties of Magnetoactive Polymers and Integrated Electrets for their Application in Soft Robotics}, series = {International Scientific Journal "Problems of Mechanics"}, volume = {69}, journal = {International Scientific Journal "Problems of Mechanics"}, number = {4}, issn = {1512-0740}, language = {en} } @misc{BeimlerLeisslEbneretal., author = {Beimler, Josef and Leißl, Caroline and Ebner, Lena and Elsner, Michael and M{\"u}hlbauer, Gerhard and Kohlert, Dieter and Schubert, Martin J. W. and Weiß, Andreas P. and Sterner, Michael and Raith, Thomas and Afranseder, Martin and Krapf, Tobias and Mottok, J{\"u}rgen and Siemers, Christian and Großmann, Benjamin and H{\"o}cherl, Johannes and Schlegl, Thomas and Schneider, Ralph and Milaev, Johannes and Rampelt, Christina and Roduner, Christian and Glowa, Christoph and Bachl, Christoph and Schliekmann, Claus and Gnan, Alfons and Grill, Martin and Ruhland, Karl and Piehler, Thomas and Friers, Daniel and Wels, Harald and Pflug, Kenny and Kucera, Markus and Waas, Thomas and Schlachetzki, Felix and Boy, Sandra and Pemmerl, Josef and Leis, Alexander and Welsch, Andreas F.X. and Graf, Franz and Zenger, Gerhard and Volbert, Klaus and Waas, Thomas and Scherzinger, Stefanie and Klettke, Meike and St{\"o}rl, Uta and Heyl, C. and Boldenko, A. and Monkman, Gareth J. and Kujat, Richard and Briem, Ulrich and Hierl, Stefan and Talbot, Sebastian and Schmailzl, Anton and Ławrowski, Robert Damian and Prommesberger, Christian and Langer, Christoph and Dams, Florian and Schreiner, Rupert and Valentino, Piergiorgio and Romano, Marco and Ehrlich, Ingo and Furgiuele, Franco and Gebbeken, Norbert and Eisenried, Michael and Jungbauer, Bastian and Hutterer, Albert and Bauhuber, Michael and Mikrievskij, Andreas and Argauer, Monika and Hummel, Helmut and Lechner, Alfred and Liebetruth, Thomas and Schumm, Michael and Joseph, Saskia and Reschke, Michael and Soska, Alexander and Schroll-Decker, Irmgard and Putzer, Michael and Rasmussen, John and Dendorfer, Sebastian and Weber, Tim and Al-Munajjed, Amir Andreas and Verkerke, Gijsbertus Jacob and Renkawitz, Tobias and Haug, Sonja and Rudolph, Clarissa and Zeitler, Annika and Schaubeck, Simon and Steffens, Oliver and Rechenauer, Christian and Schulz-Brize, Thekla and Fleischmann, Florian and Kusterle, Wolfgang and Beer, Anne and Wagner, Bernd and Neidhart, Thomas}, title = {Forschungsbericht 2013}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, doi = {10.35096/othr/pub-799}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-7990}, pages = {80}, language = {de} } @misc{MauererRexhepajMonkmanetal., author = {Mauerer, Wolfgang and Rexhepaj, Tanja and Monkman, Gareth J. and Sindersberger, Dirk and Diermeier, Andreas and Neidhart, Thomas and Wolfrum, Dominik and Sterner, Michael and Heberl, Michael and Nusko, Robert and Maier, Georg and Nagl, Klaus and Reuter, Monika and Hofrichter, Andreas and Lex, Thomas and Lesch, Florian and Kieninger, B{\"a}rbel and Szalo, Alexander Eduard and Zehner, Alexander and Palm, Christoph and Joblin, Mitchell and Apel, Sven and Ramsauer, Ralf and Lohmann, Daniel and Westner, Markus and Strasser, Artur and Munndi, Maximilian and Ebner, Lena and Elsner, Michael and Weiß, Nils and Segerer, Matthias and Hackenberg, Rudolf and Steger, Sebastian and Schmailzl, Anton and Dostalek, Michael and Armbruster, Dominik and Koch, Fabian and Hierl, Stefan and Thumann, Philipp and Swidergal, Krzysztof and Wagner, Marcus and Briem, Ulrich and Diermeier, Andreas and Spreitzer, Stefan and Beiderbeck, Sabrina and Hook, Christian and Zobel, Martin and Weber, Tim and Groß, Simon and Penzkofer, Rainer and Dendorfer, Sebastian and Schillitz, Ingo and Bauer, Thomas and Rudolph, Clarissa and Schmidt, Katja and Liebetruth, Thomas and Hamer, Markus and Haug, Sonja and Vernim, Matthias and Weber, Karsten and Saßmannshausen, Sean Patrick and Books, Sebastian and Neuleitner, Nikolaus and Rechenauer, Christian and Steffens, Oliver and Kusterle, Wolfgang and G{\"o}mmel, Roland and Wellnitz, Felix and Stierstorfer, Johannes and Stadler, Dominik and Hofmann, Matthias J. and Motschmann, Hubert and Shamonin (Chamonine), Mikhail and Bleicher, Veronika and Fischer, Sebastian and Hackenberg, Rudolf and Horn, Anton and Kawasch, Raphael and Petzenhauser, Michael and Probst, Tobias and Udalzow, Anton and Dams, Florian and Schreiner, Rupert and Langer, Christoph and Prommesberger, Christian and Ławrowski, Robert Damian}, title = {Forschungsbericht 2016}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, doi = {10.35096/othr/pub-1384}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-13840}, language = {de} } @misc{LautenschlaegerLeisDendorferetal., author = {Lautenschl{\"a}ger, Toni and Leis, Alexander and Dendorfer, Sebastian and Palm, Christoph and Schreiner, Rupert and Langer, Christoph and Prommesberger, Christian and Ławrowski, Robert Damian and Dams, Florian and Bornmann, Benjamin and Navitski, Aliaksandr and Serbun, Pavel and M{\"u}ller, G{\"u}nter and Liebetruth, Thomas and Kohlert, Dieter and Pernsteiner, Jochen and Schreier, Franz and Heerklotz, Sabrina and Heerklotz, Allwin and Boos, Alexander and Herwald, Dominik and Monkman, Gareth J. and Treiber, Daniel and Mayer, Matthias and H{\"o}rner, Eva and Bentz, Alexander and Shamonin (Chamonine), Mikhail and Johansen, S{\o}ren Peter and Reichel, Marco and Stoll, Andrea and Briem, Ulrich and Dullien, Silvia and Renkawitz, Tobias and Weber, Tim and Dendorfer, Sebastian and Grifka, Joachim and Penzkofer, Rainer and Barnsteiner, K. and Jovanovik, M. and Wernecke, P. and V{\"o}gele, A. and Bachmann, T. and Pl{\"o}tz, Martin and Schliekmann, Claus and Wels, Harald and Helmberger, Paul and Kaspar, Marcel and H{\"o}nicka, M. and Schrammel, Siegfried and Enser, Markus and Schmidmeier, Monika and Schroll-Decker, Irmgard and Haug, Sonja and Gelfert, Verena and Vernim, Matthias}, title = {Forschungsbericht 2012}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, doi = {10.35096/othr/pub-783}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-7834}, pages = {64}, language = {de} } @article{LangMonkman, author = {Lang, Alexander and Monkman, Gareth J.}, title = {An analysis of the electrical capacitance between two conducting spheres}, series = {Journal of Electrostatics}, volume = {108}, journal = {Journal of Electrostatics}, publisher = {Elsevier}, doi = {10.1016/j.elstat.2020.103518}, abstract = {Many modern composites consist of dielectric polymer matrices containing embedded spherical particles. These particles can be electrically conducting and often have magnetic properties. In order to accurately model and simulate such materials, precise calculation of the electrical capacitance between identically sized spheres is required. This is of particular relevance at microscopic dimensions where many smart material-based micro devices are concerned. This may appear trivial for a small number of particles. However, many methods or their analysis appear to be questionable or not applicable at reduced dimensions. In this work, the various methods of analysis are scrutinized before being compared with both simulation and direct measurements. It is surprising to note that of the many works investigated only 3 are in close agreement with both simulation and measurement. Graphical abstract This paper deals with the precise calculation of the electrical capacitance between two conducting spheres of equal, or near equal size.The calculations have been verified by both experimental measurements and simulation. Algorithms in MatLab (Octave) format have been included in the supporting information.}, language = {en} } @inproceedings{MonkmanDragoiEgersdoerferetal., author = {Monkman, Gareth J. and Dragoi, Daniel and Egersd{\"o}rfer, Stefan and F{\"u}chtmeier, Bernd and Nerlich, Michael}, title = {Der Roboter als Hilfsmittel in der Chirurgie // International Mechatronik Forum, Linz, October 2006}, series = {International Mechatronik Forum, Linz}, booktitle = {International Mechatronik Forum, Linz}, language = {de} } @misc{FuechtmeierNerlichMonkmanetal., author = {F{\"u}chtmeier, Bernd and Nerlich, Michael and Monkman, Gareth J. and Egersd{\"o}rfer, Stefan and Raja, Kashif}, title = {Development of a Robotic Navigation and Fracture Fixation System - 7th Intl. Conf. Medical Aspects of Telemedicine, 23 September 2002}, series = {European Journal of Medical Research; Abstracts}, journal = {European Journal of Medical Research; Abstracts}, publisher = {Biomed Central}, address = {London}, issn = {2047-783X}, pages = {28 -- 29}, language = {en} } @misc{FuechtmeierEgersdoerferMonkmanetal., author = {F{\"u}chtmeier, Bernd and Egersd{\"o}rfer, Stefan and Monkman, Gareth J. and Nerlich, Michael}, title = {Entwicklung eines Systems zur navigierten und robotergest{\"u}tzten Frakturfixation}, series = {Zweite Jahrestagung der Deutschen Gesellschaft f{\"u}r Computer- und Roboterassistierte Chirurgie : 4.-7. November 2003, N{\"u}rnberg, Germany; CURAC 2003; Abstract CD-ROM}, journal = {Zweite Jahrestagung der Deutschen Gesellschaft f{\"u}r Computer- und Roboterassistierte Chirurgie : 4.-7. November 2003, N{\"u}rnberg, Germany; CURAC 2003; Abstract CD-ROM}, address = {Erlangen-N{\"u}rnberg}, language = {de} } @misc{WeberDendorferSuessetal., author = {Weber, Karsten and Dendorfer, Sebastian and S{\"u}ß, Franz and Kubowitsch, Simone and Schratzenstaller, Thomas and Haug, Sonja and Mohr, Christa and Kiesl, Hans and Drechsler, J{\"o}rg and Westner, Markus and Kobus, J{\"o}rn and Schubert, Martin J. W. and Zenger, Stefan and Pietsch, Alexander and Weiß, Josef and Hinterseer, Sebastian and Schieck, Roland and Scherzinger, Stefanie and Klettke, Meike and Ringlstetter, Andreas and St{\"o}rl, Uta and Bissyand{\´e}, Tegawend{\´e} F. and Seeburger, Achim and Schindler, Timo and Ramsauer, Ralf and Kiszka, Jan and K{\"o}lbl, Andreas and Lohmann, Daniel and Mauerer, Wolfgang and Maier, Johannes and Scorna, Ulrike and Palm, Christoph and Soska, Alexander and Mottok, J{\"u}rgen and Ellermeier, Andreas and V{\"o}gele, Daniel and Hierl, Stefan and Briem, Ulrich and Buschmann, Knut and Ehrlich, Ingo and Pongratz, Christian and Pielmeier, Benjamin and Tyroller, Quirin and Monkman, Gareth J. and Gut, Franz and Roth, Carina and Hausler, Peter and Bierl, Rudolf and Prommesberger, Christian and Ławrowski, Robert Damian and Langer, Christoph and Schreiner, Rupert and Huang, Yifeng and She, Juncong and Ottl, Andreas and Rieger, Walter and Kraml, Agnes and Poxleitner, Thomas and Hofer, Simon and Heisterkamp, Benjamin and Lerch, Maximilian and Sammer, Nike and Golde, Olivia and Wellnitz, Felix and Schmid, Sandra and Muntschick, Claudia and Kusterle, Wolfgang and Paric, Ivan and Br{\"u}ckl, Oliver and Haslbeck, Matthias and Schmidt, Ottfried and Schwanzer, Peter and Rabl, Hans-Peter and Sterner, Michael and Bauer, Franz and Steinmann, Sven and Eckert, Fabian and Hofrichter, Andreas}, title = {Forschungsbericht 2017}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-9818209-3-5}, doi = {10.35096/othr/pub-1383}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-13835}, subject = {Forschung}, language = {de} } @inproceedings{MayerMonkman, author = {Mayer, Matthias and Monkman, Gareth J.}, title = {Modern permanent magnetic materials: Advances and limits}, series = {Inductica - Berlin Messe, 22-24 May 2007}, booktitle = {Inductica - Berlin Messe, 22-24 May 2007}, language = {en} } @misc{SorokinStepanovVasilievetal., author = {Sorokin, Vladislav V. and Stepanov, Gennady V. and Vasiliev, V. G. and Kramarenko, Elena Yu and Mayer, Matthias and Shamonin (Chamonine), Mikhail and Monkman, Gareth J.}, title = {Investigation of Dynamic Modulus and Normal Force of Magnetorheological Elastomers with Soft and Hard Magnetic Fillers}, series = {NANO 2014, July 13 - 18, 2014, Moscow ; Section 06 - Polymer, Organic and Other Soft Matter Materials}, journal = {NANO 2014, July 13 - 18, 2014, Moscow ; Section 06 - Polymer, Organic and Other Soft Matter Materials}, address = {Moscow}, language = {en} } @inproceedings{ForsterMayerRabindranathetal., author = {Forster, Eva and Mayer, Matthias and Rabindranath, Raman and Bentz, Alexander and B{\"o}se, Holger and Shamonin (Chamonine), Mikhail and Monkman, Gareth J.}, title = {Surface Control Magneto-Active Polymers (MAP)}, series = {EuroEAP 2011, First international conference on Electromechanically Active Polymer (EAP) transducers \& artificial muscles, Pisa, 8-9 June}, booktitle = {EuroEAP 2011, First international conference on Electromechanically Active Polymer (EAP) transducers \& artificial muscles, Pisa, 8-9 June}, abstract = {Smart materials change their properties with external energy supply. Besides the known ferro-fluids and Magneto Rheological Fluid (MRF) also the Electro Active Polymer (EAP) and Magneto Rheological Elastomer (MRE) belong to these intelligent materials. The latest generation of magnetic elastomers represents a new class of composite materials. This consists of small magnetized particles which are sized in the micron or even nanometer range that in turn is bounded in a highly elastic rubber matrix. These materials are very often called MRE. Only recently, it has managed to develop these materials even further, so that very soft composite materials with a young?s modulus up to 10 kPa are possible. These soft polymers could be named magneto-active polymers. The combination of polymers with magnetic materials show novel and often enhanced properties. A precisely controllable young?s modulus and hardness, giant and non-homogeneous deformation behavior and rapid response to the magnetic field opens up new possibilities for various applications. Since MAP represent a very new technology, the behavior of these materials as a function of their composition and external conditions so far are not yet sufficiently understood. Therefore, some fundamental studies are necessary. In this paper, the mechanical surface properties are studied using a micro hardness meter. This work shows the possibility to control mechanical properties at the surface of MAP with new developed magnetic systems.}, language = {en} } @article{EgersdoerferDragoiMonkmanetal., author = {Egersdoerfer, Stefan and Dragoi, Daniel and Monkman, Gareth J. and F{\"u}chtmeier, Bernd and Nerlich, Michael}, title = {Heavy duty robotic precision fracture repositioning}, series = {Industrial Robot}, volume = {31}, journal = {Industrial Robot}, number = {6}, publisher = {Emerald}, issn = {0143-991X}, doi = {10.1108/01439910410566344}, pages = {488 -- 492}, abstract = {The application of robotics in manufacturing industry is increasingly spreading to other fields such as service, security and medical, and more recently into orthopedic surgery. Most research projects to date have concentrated on the lighter side of non-invasive surgery, camera, laser guidance, light cutting and milling through bone. Just as in industrial production and processing applications, the choice of robot and its accompanying control and programming system is absolutely paramount. This simple fact has been justified in recent research dealing with the heavier forms of fracture repositioning robotics in accident surgery. This paper discusses the development of the complete system including robot, end-effector and sensors.}, language = {en} } @article{MetschSchmidtSindersbergeretal., author = {Metsch, P. and Schmidt, Henrik and Sindersberger, Dirk and Kalina, K. A. and Brummund, J. and Auernhammer, G{\"u}nter and Monkman, Gareth J. and K{\"a}stner, Markus}, title = {Field-Induced Interactions in Magneto-Active Elastomers}, series = {Smart Materials and Structures}, volume = {29}, journal = {Smart Materials and Structures}, number = {8}, publisher = {IOPscience}, doi = {10.1088/1361-665X/ab92dc}, pages = {1 -- 10}, abstract = {In this contribution, field-induced interactions of magnetizable particles embedded into a soft elastomer matrix are analyzed with regard to the resulting mechanical deformations. By comparing experiments for two-, three- and four-particle systems with the results of finite element simulations, a fully coupled continuum model for magneto-active elastomers is validated with the help of real data for the first time. The model under consideration permits the investigation of magneto-active elastomers with arbitrary particle distances, shapes and volume fractions as well as magnetic and mechanical properties of the individual constituents. It thus represents a basis for future studies on more complex, realistic systems. Our results show a very good agreement between experiments and numerical simulations—the deformation behavior of all systems is captured by the model qualitatively as well as quantitatively. Within a sensitivity analysis, the influence of the initial particle positions on the systems' response is examined. Furthermore, a comparison of the full three-dimensional model with the often used, simplified two-dimensional approach shows the typical overestimation of resulting interactions in magneto-active elastomers.}, language = {en} } @misc{HirmerDanilovGiglbergeretal., author = {Hirmer, Marion and Danilov, Sergey N. and Giglberger, Stephan and Putzger, J{\"u}rgen and Niklas, Andreas and J{\"a}ger, Andreas and Hiller, Karl-Anton and Schmalz, Gottfried and Redlich, Britta and Monkman, Gareth J. and Ganichev, Sergey D.}, title = {Spectroscopic Study of Human Teeth and Blood from Visible to Terahertz Frequencies for Clinical Diagnosis of Dental Pulp Vitality}, series = {PACS, November 11, 2011}, journal = {PACS, November 11, 2011}, abstract = {Transmission spectra of wet human teeth and dentin slices, together with blood of different flow rates were investigated. The measurements carried out over a wide spectral range, from visible light down to terahertz radiation. The results make it possible to find the optimum light frequency for an all-optical determination of pulpal blood flow and, consequently, for clinically diagnosis of tooth vitality.}, language = {en} } @inproceedings{MayerForsterRabindranathetal., author = {Mayer, Matthias and Forster, Eva and Rabindranath, Raman and Bentz, Alexander and B{\"o}se, Holger and Shamonin (Chamonine), Mikhail and Monkman, Gareth J.}, title = {Highly compliant Magneto-Active Polymers (MAPs)}, series = {Actuator'11, Bremen, May 2011}, booktitle = {Actuator'11, Bremen, May 2011}, language = {en} } @incollection{SchrimerPutzMonkman, author = {Schrimer, M and Putz, Christoph and Monkman, Gareth J.}, title = {Boron-Silicone-Oxide Polymers}, series = {Boron: advances in research and applications}, booktitle = {Boron: advances in research and applications}, editor = {McConnell, Lynn}, publisher = {Nova Science Publishers}, address = {New York, NY}, isbn = {9781685072315}, doi = {10.52305/AFKU5564}, pages = {117 -- 179}, language = {en} } @article{ZimmermannChavezVegaBeckeretal., author = {Zimmermann, Klaus and Chavez Vega, Jhohan Harvey and Becker, Tatiana I. and Witte, Hartmut and Schilling, Cornelius and K{\"o}hring, Sebastian and B{\"o}hm, Valter and Monkman, Gareth J. and Prem, Nina and Sindersberger, Dirk and Lutz, I. I. and Merker, Lukas}, title = {An approach to a form-adaptive compliant gripper element based on magneto-sensitive elastomers with a bioinspired sensorized surface}, series = {Problems of Mechanics}, volume = {75}, journal = {Problems of Mechanics}, number = {2}, publisher = {Georgian Technical University}, address = {Tbilisi}, issn = {1512-0740}, pages = {23 -- 38}, language = {en} } @misc{ChavezVegaBoehmYinetal., author = {Chavez Vega, Jhohan Harvey and B{\"o}hm, Valter and Yin, J. and Becker, Tatiana I. and K{\"o}hring, Sebastian and Monkman, Gareth J. and Odenbach, Stefan and Zimmermann, Klaus}, title = {Field induced plasticity of magneto-sensitive elastomers for gripping technology applications}, series = {6th Colloquium of SPP 1681, Benediktbeuern, 26. - 28.09.2018 : Book of Abstracts}, journal = {6th Colloquium of SPP 1681, Benediktbeuern, 26. - 28.09.2018 : Book of Abstracts}, pages = {16 -- 17}, language = {en} } @inproceedings{DrexlerHirmerDanilovetal., author = {Drexler, C. and Hirmer, Marion and Danilov, Sergey N. and Giglberger, Stephan and Putzger, J{\"u}rgen and Niklas, Andreas and J{\"a}ger, Andreas and Hiller, Karl-Anton and L{\"o}ffler, S. and Schmalz, Gottfried and Redlich, Britta and Schulz, Irene and Monkman, Gareth J. and Ganichev, Sergey D.}, title = {Infrared spectroscopy for clinical diagnosis of dental pulp vitality}, series = {37th International Conference on Infrared, Millimetre, and Terahertz Waves (IRMMW-THz 37), 23-28 September 2012 , Wollongong, Australia}, booktitle = {37th International Conference on Infrared, Millimetre, and Terahertz Waves (IRMMW-THz 37), 23-28 September 2012 , Wollongong, Australia}, publisher = {IEEE}, address = {Piscataway, NJ}, doi = {10.1109/IRMMW-THz.2012.6380091}, abstract = {Transmission spectra of wet human teeth and dentin slices, together with blood of different flow rates were investigated over a wide spectral range, from visible to terahertz (THz) light. The results make it possible to find the optimum light frequency for an all-optical determination of pulpal blood flow and, consequently, for clinically diagnosis of tooth vitality.}, language = {en} } @inproceedings{ForsterRabindranathMayeretal., author = {Forster, Eva and Rabindranath, Raman and Mayer, Matthias and Bentz, Alexander and B{\"o}se, Holger and Shamonin (Chamonine), Mikhail and Monkman, Gareth J.}, title = {Characterization of ultra soft Magneto-Active Polymers (MAPs)}, series = {Conference proceedings / INDUCTICA 2011, Berlin, Germany, 24 - 26 May}, booktitle = {Conference proceedings / INDUCTICA 2011, Berlin, Germany, 24 - 26 May}, language = {en} } @inproceedings{NerlichMonkmanFuechtmeieretal., author = {Nerlich, Michael and Monkman, Gareth J. and F{\"u}chtmeier, Bernd and Egersd{\"o}rfer, Stefan}, title = {Development of a Robotic Navigation and Fracture Fixation System}, series = {1. Jahrestagung der Deutschen Gesellschaft f{\"u}r Computer- und Roboterassistierte Chirurgie (CURAC), Leipzig, 2002}, booktitle = {1. Jahrestagung der Deutschen Gesellschaft f{\"u}r Computer- und Roboterassistierte Chirurgie (CURAC), Leipzig, 2002}, language = {en} } @misc{BroserFalterŁawrowskietal., author = {Broser, Christian and Falter, Thomas and Ławrowski, Robert Damian and Altenbuchner, Amelie and V{\"o}gele, Daniel and Koss, Claus and Schlamp, Matthias and Dunnweber, Jan and Steffens, Oliver and Heckner, Markus and Jaritz, Sabine and Schiegl, Thomas and Corsten, Sabine and Lauer, Norina and Guertler, Katherine and Koenig, Eric and Haug, Sonja and Huber, Dominik and Birkenmaier, Clemens and Krenkel, Lars and Wagner, Thomas and Justus, Xenia and Saßmannshausen, Sean Patrick and Kleine, Nadine and Weber, Karsten and Braun, Carina N. and Giacoppo, Giuliano and Heinrich, Michael and Just, Tobias and Schreck, Thomas and Schnabl, Andreas and Gilmore, Amador T{\´e}ran and Roeslin, Samuel and Schmid, Sandra and Wellnitz, Felix and Malz, Sebastian and Maurial, Andreas and Hauser, Florian and Mottok, J{\"u}rgen and Klettke, Meike and Scherzinger, Stefanie and St{\"o}rl, Uta and Heckner, Markus and Bazo, Alexander and Wolff, Christian and Kopper, Andreas and Westner, Markus and Pongratz, Christian and Ehrlich, Ingo and Briem, Ulrich and Hederer, Sebastian and Wagner, Marcus and Schillinger, Moritz and G{\"o}rlach, Julien and Hierl, Stefan and Siegl, Marco and Langer, Christoph and Hausladen, Matthias and Schreiner, Rupert and Haslbeck, Matthias and Kreuzer, Reinhard and Br{\"u}ckl, Oliver and Dawoud, Belal and Rabl, Hans-Peter and Gamisch, Bernd and Schmidt, Ottfried and Heberl, Michael and G{\"a}nsbauer, Bianca and Bick, Werner and Ellermeier, Andreas and Monkman, Gareth J. and Prem, Nina and Sindersberger, Dirk and Tschurtschenthaler, Karl and Aurbach, Maximilian and Dendorfer, Sebastian and Betz, Michael A. and Szecsey, Tamara and Mauerer, Wolfgang and Murr, Florian}, title = {Forschung 2018}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-9818209-5-9}, doi = {10.35096/othr/pub-1382}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-13826}, pages = {98}, subject = {Forschung}, language = {de} } @techreport{RabindranathBoeseProbstetal., author = {Rabindranath, Raman and B{\"o}se, Holger and Probst, J{\"o}rn and Schlunck, G{\"u}nther and Mayer, Matthias and Forster, Eva and Bentz, Alexander and Shamonin (Chamonine), Mikhail and Monkman, Gareth J.}, title = {EAP mit magnetisch steuerbarer Elastizit{\"a}t zur Interaktion mit Bindegewebszellen MagElan}, address = {Regensburg}, organization = {Hochschule f{\"u}r Angewandte Wissenschaften Regensburg / Fachbereich Elektro- und Informationstechnik}, pages = {37}, language = {de} } @article{DillingerWeberMayeretal., author = {Dillinger, Andrea Elisabeth and Weber, Gregor R. and Mayer, Matthias and Schneider, Magdalena and G{\"o}ppner, Corinna and Ohlmann, Andreas and Shamonin (Chamonine), Mikhail and Monkman, Gareth J. and Fuchshofer, Rudolf and Keller, Kate and Lozano, Diana C. and Clark, Abbot}, title = {CCN2/CTGF-A Modulator of the Optic Nerve Head Astrocyte}, series = {Frontiers in cell and developmental biology (Front Cell Dev Biol.)}, volume = {10}, journal = {Frontiers in cell and developmental biology (Front Cell Dev Biol.)}, publisher = {frontiers}, doi = {10.3389/fcell.2022.864433}, pages = {864433}, abstract = {In primary open-angle glaucoma (POAG), a neurodegenerative disease of the optic nerve (ON) and leading cause of blindness, the optic nerve head (ONH) undergoes marked structural extracellular matrix (ECM) changes, which contribute to its permanent deformation and to degeneration of ON axons. The remodeling process of the ECM causes changes in the biomechanical properties of the ONH and the peripapillary sclera, which is accompanied by an increased reactivity of the resident astrocytes. The molecular factors involved in the remodeling process belong to the Transforming growth factor (TGF)-β superfamily, especially TGF-β2. In previous publications we showed that TGF-β2 induced ECM alterations are mediated by Cellular Communication Network Factor (CCN)2/Connective Tissue Growth Factor (CTGF) and recently we showed that CCN2/CTGF is expressed by astrocytes of the ON under normal conditions. In this study we wanted to get a better understanding of the function of CCN2/CTGF under normal and pathologic conditions. To this end, we analyzed the glial lamina and peripapillary sclera of CCN2/CTGF overexpressing mice and studied the effect of CCN2/CTGF and increasing substratum stiffness on murine ON astrocytes in vitro. We observed enhanced astrocyte reactivity in the ONH, increased ECM protein synthesis in the peripapillary sclera and increased Ccn2/Ctgf expression in the ONH during the pathologic development in situ. CCN2/CTGF treatment of primary murine ON astrocytes induced a higher migration rate, and increase of ECM proteins including fibronectin, elastin and collagen type III. Furthermore, the astrocytes responded to stiffer substratum with increased glial fibrillary acidic protein, vimentin, actin and CCN2/CTGF synthesis. Finally, we observed the reinforced appearance of CCN2/CTGF in the lamina cribrosa of glaucomatous patients. We conclude that reactive changes in ONH astrocytes, induced by the altered biomechanical characteristics of the region, give rise to a self-amplifying process that includes increased TGF-β2/CCN2/CTGF signaling and leads to the synthesis of ECM molecules and cytoskeleton proteins, a process that in turn augments the stiffness at the ONH. Such a scenario may finally result in a vicious circle in the pathogenesis of POAG. The transgenic CTGF-overexpressing mouse model might be an optimal model to study the chronic pathological POAG changes in the ONH.}, language = {en} } @misc{ChavezVegaBoehmScharffetal., author = {Chavez Vega, Jhohan Harvey and B{\"o}hm, Valter and Scharff, Moritz and Prem, Nina and Monkman, Gareth J. and Becker, Tatiana I. and G{\"u}nther, L. and Alencastre, Jorge H. and Grieseler, R. and Zimmermann, Klaus}, title = {Magneto-active elastomer as viscoelastic foundation material for artificial tactile sensors with tuneable properties}, series = {Book of Abstracts of the 16th German Ferrofluid Workshop, Braunschweig, 18.-20.07.2018}, journal = {Book of Abstracts of the 16th German Ferrofluid Workshop, Braunschweig, 18.-20.07.2018}, pages = {16 -- 17}, language = {en} } @incollection{FuechtmeierEgersdoerferTumaetal., author = {F{\"u}chtmeier, Bernd and Egersd{\"o}rfer, Stefan and Tuma, G. and Monkman, Gareth J. and Nerlich, Michael}, title = {Development of a Robotic Navigation and Fracture Fixation System}, series = {Integration of Health Telematics into Medical Practice}, booktitle = {Integration of Health Telematics into Medical Practice}, editor = {Nerlich, Michael and Sch{\"a}chinger, Ulrich}, publisher = {IOS Press}, pages = {43 -- 49}, language = {en} } @article{PutzSchirmerSattleretal., author = {Putz, Christoph and Schirmer, Maximilian and Sattler, Robert and Monkman, Gareth J.}, title = {Fabrication of Bisphenol-free Boron-Siloxane Polymers}, series = {Materials Chemistry and Physics}, journal = {Materials Chemistry and Physics}, edition = {Journal Pre-proof}, publisher = {Elsevier}, doi = {10.1016/j.matchemphys.2025.130567}, abstract = {Interest in the preparation of magnetoactive boron-siloxane polymers (MBP) has been stimulated by recent scientific developments. However, recent regulations have prohibited the inclusion of Bisphenol-A normally employed in the manufacture of commercially available products. In the following publication, two different routes for the preparation of magnetoactive borosiloxane polymers have been taken. First, the possibilities of obtaining homogeneous mixtures of magnetoactive polymers by mixing the magnetic particles with the polymer using solid CO2 (dry ice) and stirring (shearing) are investigated. In the course of the work, an approach for the preparation of reference materials of different viscosities was made to prove the transferability to other elastomers. This is then followed by a brief review of the reaction of the polymer with different solvents in relation to the mixing with particles. In manually kneaded compounds, dispersions ranging from 0.00004 to 0.004 particles per mm3 are common. The process described in this work resulted in agglomerations of no greater than 0.00004 particles per mm3 A possible synthesis route for bisphenol-free boron-siloxanes is then considered, in which for the polymer matrix, polydimethylsilanes (dichloro(methyl)silane), boric acid and iron(III)chloride are used for this purpose by polycondensation.}, language = {en} }