@article{TrautnerSchmaussShamoninChamonine, author = {Trautner, Ralph and Schmauss, Bernhard and Shamonin (Chamonine), Mikhail}, title = {Herstellung und Charakterisierung eines extrinsischen faseroptischen Elementarsensors zur Temperaturmessung}, series = {tm - Technisches Messen}, volume = {75}, journal = {tm - Technisches Messen}, number = {10}, publisher = {De Gruyter}, doi = {10.1524/teme.2008.0866}, abstract = {Es werden Herstellung und Charakterisierung eines faseroptischen Elementarsensors zur Temperaturmessung vorgestellt. Der Sensorkopf in Form eines Prismas aus Indiumphosphid nutzt die Temperaturabh{\"a}ngigkeit der Absorptionskante des Halbleitermaterials. Aufgrund der Abmessungen des Prismas im Grenzbereich von Feinmechanik zu Mikrosystemtechnik ist ein angepasstes Herstellungsverfahren notwendig.}, language = {de} } @article{SydorukRadkovskayaZhuromskyyetal., author = {Sydoruk, O. and Radkovskaya, Anna A. and Zhuromskyy, Oleksandr and Shamonina, Ekaterina and Shamonin (Chamonine), Mikhail and Stevens, Chris J. and Faulkner, Grahame and Edwards, David J. and Solymar, L.}, title = {Tailoring the near-field guiding properties of magnetic metamaterials with two resonant elements per unit cell}, series = {PHYSICAL REVIEW B}, volume = {73}, journal = {PHYSICAL REVIEW B}, number = {22}, publisher = {APS}, doi = {10.1103/PhysRevB.73.224406}, abstract = {A theoretical and experimental study of magnetic metamaterials with unit cells containing two resonant elements is presented. The properties of these structures, consisting of split rings, are governed by strongly anisotropic magnetic coupling between individual elements. This coupling leads to propagation of slow magnetoinductive waves in the vicinity of the resonant frequency. The wavelength of magnetoinductive waves is much smaller than the free-space wavelength of the electromagnetic radiation. This opens up the possibility of manipulating the near field on a subwavelength scale. We develop a theoretical formulation for coupled chains of metamaterial elements allowing the tailoring of their guiding properties in the near field. In a comprehensive analysis modes of coupled waveguides supporting forward and/or backward waves are identified and the corresponding hybridization mechanisms for dispersion equations of magnetoinductive waves are determined. Analytical predictions are verified both experimentally and numerically on a variety of coupled waveguides. The approach can be employed for the design of near-field manipulating devices.}, language = {en} } @article{HesmerTatartschukZhuromskyyetal., author = {Hesmer, Frank and Tatartschuk, Eugen and Zhuromskyy, Oleksandr and Radkovskaya, Anna A. and Shamonin (Chamonine), Mikhail and Hao, Tong and Stevens, Chris J. and Faulkner, Grahame and Edwards, David J. and Shamonina, Ekaterina}, title = {Coupling mechanisms for split ring resonators: Theory and experiment}, series = {Physica status solidi b}, volume = {244}, journal = {Physica status solidi b}, number = {4}, publisher = {Wiley}, doi = {10.1002/pssb.200674501}, pages = {1170 -- 1175}, abstract = {We study experimentally and theoretically coupling mechanisms between metamaterial elements of the split ring resonator (SRR) type. We show that, depending on the orientation of the elements relative to each other, the coupling may be either of magnetic or electric type or a combination of both. Experimental results on SRRs with resonances around 1.7-1.9 GHz agree quantitatively with results of simulations (CST Microwave Studio). Further simulations provide analysis for a variety of SRRs both in the GHz and in the 20 THz frequency regions. The variety of coupling mechanisms can be employed in designing near field manipulating devices based on propagation of slow waves.}, language = {en} } @article{KlankHagedornHolthausetal., author = {Klank, Michael and Hagedorn, Oliver and Holthaus, Carsten and Shamonin (Chamonine), Mikhail and D{\"o}tsch, Horst}, title = {Characterization and optimization of magnetic garnet films for magneto-optical visualization of magnetic field distributions}, series = {NDT \& E International}, volume = {36}, journal = {NDT \& E International}, number = {6}, publisher = {Elsevier}, doi = {10.1016/S0963-8695(03)00012-4}, pages = {375 -- 381}, abstract = {Rare-earth iron garnet films with in-plane anisotropy grown on (111)-oriented substrates can be used as magneto-optical indicator films for visualization of magnetic leakage fields in nondestructive evaluation. The influence of Faraday rotation, Faraday ellipticity, absorption and film thickness on the performance of a magneto-optical indicator film is investigated. A new optimization method is introduced and compared with the method of contrast optimization. The theory is experimentally verified and an application example is presented.}, language = {en} } @article{LukyanetsSnarskiiShamoninChamonineetal., author = {Lukyanets, S. and Snarskii, Andrei A. and Shamonin (Chamonine), Mikhail and Bakaev, V. V.}, title = {Calculation of magnetic leakage field from a surface defect in a linear ferromagnetic material: an analytical approach}, series = {NDT \& E International}, volume = {36}, journal = {NDT \& E International}, number = {1}, publisher = {Elsevier}, doi = {10.1016/s0963-8695(02)00071-3}, pages = {51 -- 55}, abstract = {A novel analytical approach for calculating the magnetic leakage field from surface defects is proposed and demonstrated for the case of a linear ferromagnetic material. The novelty of the theory is that it relates the distribution of induced magnetic charges to the surface shape. An excellent agreement between the analytical and numerical results is shown. The functional relations between different magnetic field components are discussed.}, language = {en} } @article{BakaevSnarskiiShamoninChamonine, author = {Bakaev, V. V. and Snarskii, Andrei A. and Shamonin (Chamonine), Mikhail}, title = {The permeability and remanent magnetization of a randomly inhomogeneous two-phase medium}, series = {Technical Physics}, volume = {47}, journal = {Technical Physics}, number = {1}, publisher = {Springer}, doi = {10.1134/1.1435901}, pages = {125 -- 128}, abstract = {A randomly inhomogeneous composite consisting of two, ferromagnetic and nonmagnetic (para-or diamagnetic), phases is considered. The dependence of the effective permeability of the composite on the concentration of the ferromagnetic phase and on the applied magnetic field is found for the case of the negligible hysteresis loop. When the hysteresis loop is appreciable, the remanent magnetization as a function of the ferromagnet concentration is calculated.}, language = {en} } @article{BakaevSnarskiiShamoninChamonine, author = {Bakaev, V. V. and Snarskii, Andrei A. and Shamonin (Chamonine), Mikhail}, title = {The effective magnetic permeability of a two-phase fibred ferromagnetic composite}, series = {Technical Physics}, volume = {46}, journal = {Technical Physics}, number = {12}, publisher = {Springer}, doi = {10.1134/1.1427995}, pages = {1571 -- 1574}, language = {en} } @article{KovalevBelyaevavonHofenetal., author = {Kovalev, Alexander and Belyaeva, Inna A. and von Hofen, Christian and Gorb, Stanislav and Shamonin (Chamonine), Mikhail}, title = {Magnetically Switchable Adhesion and Friction of Soft Magnetoactive Elastomers}, series = {Advanced Engineering Materials}, volume = {24}, journal = {Advanced Engineering Materials}, number = {10}, publisher = {WILEY-VCH}, doi = {10.1002/adem.202200372}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-45283}, pages = {1 -- 8}, abstract = {Herein, the effect of an applied moderate (~240 mT) magnetic field on the work of adhesion (WoA) of mechanically soft (the shear modulus ~10 kPa) magnetoactive elastomer (MAE) samples with two different mass fractions (70 and 80 wt\%) of carbonyl iron powder (CIP) is concerned. The unfilled elastomer sample is used for comparison. Due to some sedimentation of filling particles, the concentration of inclusions in thin (~10 μm) subsurface layers is different. It is shown that the WoA increases (up to 1.8-fold) on the particle-enriched side (PES) in the magnetic field and its value is higher for higher filler concentration. On the particle-depleted side (PDS), WoA does not depend on particle concentration and on the magnetic field. Adhesion and friction are coupled in MAEs. No statistically significant difference in the friction coefficient, determined from the extended Amontons´ law, depending on sample side, CIP concentration, or presence of magnetic field is found. However, the PDS in the magnetic field demonstrates significantly higher critical shear stress compared to that for the PES or PDS in the absence of magnetic field. Correlations between different surface properties are discussed. Obtained results are useful for the development of magnetically controllable soft robots.}, language = {en} } @article{LohmeyerShamoninChamonineHertel, author = {Lohmeyer, Manfred and Shamonin (Chamonine), Mikhail and Hertel, Peter}, title = {Integrated optical circulator based on radiatively coupled magneto-optic waveguides}, series = {Optical Engineering}, volume = {36}, journal = {Optical Engineering}, number = {3}, publisher = {SPIE}, doi = {10.1117/1.601255}, pages = {889 -- 895}, abstract = {In a three-guide coupler with multimode central waveguide, more than two modes of the entire structure participate in the coupling between the outer waveguides. Using a three-mode approximation we found simple conditions for complete power transfer between the outer waveguides: the device length has to match certain multiples of the con- ventionally defined coupling length. The specific form of the relevant modes allows us to design a magneto-optic isolator or circulator with significantly reduced device length (as compared to the conventional nonreciprocal coupler). The performance of the proposed devices is simulated by propagating-mode calculations. Estimates for admissible fabrication tolerances for the layer thicknesses are presented.}, language = {en} } @article{BelyaevaKramarenkoStepanovetal., author = {Belyaeva, Inna A. and Kramarenko, Elena Yu and Stepanov, Gennady V. and Sorokin, Vladislav V. and Stadler, Dominik and Shamonin (Chamonine), Mikhail}, title = {Transient magnetorheological response of magnetoactive elastomers to step and pyramid excitations}, series = {SOFT MATTER}, volume = {12}, journal = {SOFT MATTER}, number = {11}, publisher = {ROYAL SOC CHEMISTRY}, doi = {10.1039/c5sm02690c}, pages = {2901 -- 2913}, abstract = {Transient rheological response of magnetoactive elastomers is experimentally studied using dynamic torsion at a fixed oscillation frequency in temporally stepwise changing magnetic fields and oscillation amplitudes. For step magnetic-field excitations, at least three exponential functions are required to reasonably describe the time behavior of the storage shear modulus over long time scales (>10(3) s). The deduced characteristic time constants of the corresponding rearrangement processes of the filler network differ approximately by one order of magnitude: tau(1) less than or similar to 10(1) s, tau(2) similar to 10(2) s, and tau(3) similar to 10(3) s. The sudden imposition of the external magnetic field activates a very fast rearrangement process with the characteristic time under 10 s, which cannot be determined more precisely due to the measurement conditions. Even more peculiar transient behavior has been observed during pyramid excitations, when either the external magnetic field was first stepwise increased and then decreased in a staircase manner at a fixed strain amplitude gamma or the strain amplitude gamma was first stepwise increased and then decreased in a staircase manner at a fixed magnetic field. In particular, the so-called "cross-over effect'' has been identified in both dynamical loading programs. This cross-over effect seems to be promoted by the application of the external magnetic field. The experimental results are discussed in the context of the specific rearrangement of the magnetic filler network under the simultaneous action of the external magnetic field and shear deformation. Striking similarities of the observed phenomena to the structural relaxation processes in glassy materials and to the jamming transition of granular materials are pointed out. The obtained results are important for fundamental understanding of material behavior in magnetic fields as well as for the development of devices on the basis of magnetoactive elastomeric materials.}, language = {en} } @article{BelyaevaKramarenkoShamoninChamonine, author = {Belyaeva, Inna A. and Kramarenko, Elena Yu and Shamonin (Chamonine), Mikhail}, title = {Magnetodielectric effect in magnetoactive elastomers: Transient response and hysteresis}, series = {POLYMER}, volume = {127}, journal = {POLYMER}, publisher = {ELSEVIER}, doi = {10.1016/j.polymer.2017.08.056}, pages = {119 -- 128}, abstract = {Magnetodielectric properties of magnetoactive elastomers comprising micrometer-sized iron particles dispersed in compliant elastomer matrices are experimentally studied in stepwise time-varying dc magnetic fields. It is found that imposition of magnetic field significantly increases both the effective lossless permittivity of these composite materials as well as their effective conductivity. These magnetodielectric effects are more pronounced for larger concentrations of soft-magnetic filler particles and softer elastomer matrices. The largest observed relative change of the effective dielectric constant in the maximum magnetic field of 0.57 T is of the order of 1000\%. The largest observed absolute change of the loss tangent is approximately 0.8. The transient response of the magnetodielectric effect to a step magnetic-field excitation can be rather complex. It changes from a simple monotonic growth with time for small magnetic-field steps (<0.1 T) to a non-monotonic behavior with a significant rapidly appearing overshoot for large magnetic-field steps (>0.3 T). The settling time to the magnetic-field step excitation can reach roughly 1000 s and it depends on the applied magnetic field and sample composition. There is also significant hysteresis of the magnetodielectric effect on the externally applied magnetic field. These findings are attributed to the rearrangement of ferromagnetic filler particles in external magnetic fields. The results will be useful for understanding and predicting the transient behavior of magnetoactive elastomers in applications where the control magnetic field is time dependent. (C) 2017 Elsevier Ltd. All rights reserved.}, language = {en} } @article{SorokinBelyaevaShamoninChamonineetal., author = {Sorokin, Vladislav V. and Belyaeva, Inna A. and Shamonin (Chamonine), Mikhail and Kramarenko, Elena Yu}, title = {Magnetorheological response of highly filled magnetoactive elastomers from perspective of mechanical energy density: Fractal aggregates above the nanometer scale?}, series = {Physical Review E}, volume = {95}, journal = {Physical Review E}, number = {6}, publisher = {Amer Physical Soc}, doi = {10.1103/PhysRevE.95.062501}, abstract = {The dynamic shear modulus of magnetoactive elastomers containing 70 and 80 mass \% of carbonyl iron microparticles is measured as a function of strain amplitude via dynamic torsion oscillations in various magnetic fields. The results are presented in terms of the mechanical energy density and considered in the framework of the conventional Kraus model. The form exponent of the Kraus model is further related to a physical model of Huber et al. [Huber et al., J. Phys.: Condens. Matter 8, 409 (1996)] that uses a realistic representation for the cluster network possessing fractal structure. Two mechanical loading regimes are identified. At small strain amplitudes the exponent beta of the Kraus model changes in an externally applied magnetic field due to rearrangement of ferromagnetic-filler particles, while at large strain amplitudes, the exponent beta seems to be independent of the magnetic field. The critical mechanical energy characterizing the transition between these two regimes grows with the increasing magnetic field. Similarities between agglomeration and deagglomeration of magnetic filler under simultaneously applied magnetic field and mechanical shear and the concept of jamming transition are discussed. It is proposed that the magnetic field should be considered as an additional parameter to the jamming phase diagram of rubbers filled with magnetic particles.}, language = {en} } @article{BelyaevaKleppLemmeletal., author = {Belyaeva, Inna A. and Klepp, J{\"u}rgen and Lemmel, Hartmut and Shamonin (Chamonine), Mikhail}, title = {Feasibility of Probing the Filler Restructuring in Magnetoactive Elastomers by Ultra-Small-Angle Neutron Scattering}, series = {Applied Sciences}, volume = {11}, journal = {Applied Sciences}, number = {10}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app11104470}, pages = {1 -- 9}, abstract = {Ultra-small-angle neutron scattering (USANS) experiments are reported on isotropic magnetoactive elastomer (MAE) samples with different concentrations of micrometer-sized iron particles in the presence of an in-plane magnetic field up to 350 mT. The effect of the magnetic field on the scattering curves is observed in the scattering vector range between 2.5 x 10(-5) and 1.85 x 10(-4) angstrom(-1). It is found that the neutron scattering depends on the magnetization history (hysteresis). The relation of the observed changes to the magnetic-field-induced restructuring of the filler particles is discussed. The perspectives of employing USANS for investigations of the internal microstructure and its changes in magnetic field are considered.}, language = {en} } @article{GlavanBelyaevaShamoninChamonine, author = {Glavan, Gašper and Belyaeva, Inna A. and Shamonin (Chamonine), Mikhail}, title = {On the Piezomagnetism of Magnetoactive Elastomeric Cylinders in Uniform Magnetic Fields: Height Modulation in the Vicinity of an Operating Point by Time-Harmonic Fields}, series = {Polymers}, volume = {16}, journal = {Polymers}, number = {19}, doi = {10.3390/polym16192706}, abstract = {Soft magnetoactive elastomers (MAEs) are currently considered to be promising materials for actuators in soft robotics. Magnetically controlled actuators often operate in the vicinity of a bias point. Their dynamic properties can be characterized by the piezomagnetic strain coefficient, which is a ratio of the time-harmonic strain amplitude to the corresponding magnetic field strength. Herein, the dynamic strain response of a family of MAE cylinders to the time-harmonic (frequency of 0.1-2.5 Hz) magnetic fields of varying amplitude (12.5 kA/m-62.5 kA/m), superimposed on different bias magnetic fields (25-127 kA/m), is systematically investigated for the first time. Strain measurements are based on optical imaging with sub-pixel resolution. It is found that the dynamic strain response of MAEs is considerably different from that in conventional magnetostrictive polymer composites (MPCs), and it cannot be described by the effective piezomagnetic constant from the quasi-static measurements. The obtained maximum values of the piezomagnetic strain coefficient (∼102 nm/A) are one to two orders of magnitude higher than in conventional MPCs, but there is a significant phase lag (35-60°) in the magnetostrictive response with respect to an alternating magnetic field. The experimental dependencies of the characteristics of the alternating strain on the amplitude of the alternating field, bias field, oscillation frequency, and aspect ratio of cylinders are given for several representative examples. It is hypothesized that the main cause of observed peculiarities is the non-linear viscoelasticity of these composite materials.}, language = {en} } @article{JezeršekKrieglKravanjaetal., author = {Jezeršek, Matija and Kriegl, Raphael and Kravanja, Gaia and Hribar, Luka and Drevenšek-Olenik, Irena and Unold, Heiko and Shamonin (Chamonine), Mikhail}, title = {Control of Droplet Impact through Magnetic Actuation of Surface Microstructures}, series = {Advanced Materials Interfaces}, volume = {10}, journal = {Advanced Materials Interfaces}, number = {11}, publisher = {Wiley}, doi = {10.1002/admi.202202471}, abstract = {An effective method for on-demand control over the impact dynamics of droplets on a magnetoresponsive surface is reported. The surface is comprised of micrometer-sized lamellas from a magnetoactive elastomer on a copper substrate. The surface itself is fabricated using laser micromachining. The orientation of the lamellae is switched from edge-on (orthogonal to the surface) to face-on (parallel to the surface) by changing the direction of a moderate (<250 mT) magnetic field. This simple actuation technique can significantly change the critical velocities of droplet rebound, deposition, and splashing. Rebound and deposition regimes can be switched up to Weber number We < 13 ± 3, while deposition and splashing can be switched in the range of 32 < We < 52. Because a permanent magnet is used, no permanent power supply is required for maintaining the particular regime of droplet impact. The presented technology is highly flexible and enables selective fabrication and actuation of microstructures on complex devices. It has great potential for applications in soft robotics, microfluidics, and advanced thermal management.}, language = {en} } @article{GlavanKettlBrunhuberetal., author = {Glavan, Gašper and Kettl, Wolfgang and Brunhuber, Alexander and Shamonin (Chamonine), Mikhail and Drevenšek-Olenik, Irena}, title = {Effect of Material Composition on Tunable Surface Roughness of Magnetoactive Elastomers}, series = {Polymers}, volume = {11}, journal = {Polymers}, number = {4}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/polym11040594}, pages = {1 -- 13}, abstract = {We investigated magnetic-field-induced modifications of the surface roughness of magnetoactive elastomers (MAEs) with four material compositions incorporating two concentrations of ferromagnetic microparticles (70 wt\% and 80 wt\%) and exhibiting two shear storage moduli of the resulting composite material (about 10 kPa and 30 kPa). The analysis was primarily based on spread optical reflection measurements. The surfaces of all four materials were found to be very smooth in the absence of magnetic field (RMS roughness below 50 nm). A maximal field-induced roughness modification (approximately 1 m/T) was observed for the softer material with the lower filler concentration, and a minimal modification (less than 50 nm/T) was observed for the harder material with the higher filler concentration. All four materials showed a significant decrease in the total optical reflectivity with an increasing magnetic field as well. This effect is attributed to the existence of a distinct surface layer that is depleted of microparticles in the absence of a magnetic field but becomes filled with particles in the presence of the field. We analyzed the temporal response of the reflective properties to the switching on and off of the magnetic field and found switching-on response times of around 0.1 s and switching-off response times in the range of 0.3-0.6 s. These observations provide new insight into the magnetic-field-induced surface restructuring of MAEs and may be useful for the development of magnetically reconfigurable elastomeric optical surfaces.}, language = {en} } @article{GlavanSalamonBelyaevaetal., author = {Glavan, Gašper and Salamon, Peter and Belyaeva, Inna A. and Shamonin (Chamonine), Mikhail and Drevenšek-Olenik, Irena}, title = {Tunable surface roughness and wettability of a soft magnetoactive elastomer}, series = {Journal of applied polymer science}, volume = {135}, journal = {Journal of applied polymer science}, number = {18}, publisher = {Wiley}, doi = {10.1002/app.46221}, abstract = {Surface topographical modifications of a soft magnetoactive elastomer (MAE) in response to variable applied magnetic field are investigated. The analysis is performed in situ and is based on optical microscopy, spread optical reflection and optical profilometry measurements. Optical profilometry analysis shows that the responsivity of magnetic field-induced surface roughness with respect to external magnetic field is in the range of 1 mu m/T. A significant hysteresis of surface modifications takes place for increasing and decreasing fields. Investigations of shape of sessile water droplets deposited on the MAE surface reveal that field-induced topographical modifications affect the contact angle of water at the surface. This effect is reversible and the responsivity to magnetic field is in the range of 20 degrees/T. Despite the increased surface roughness, the apparent contact angle decreases with increasing field, which is attributed to the field-induced protrusion of hydrophilic microparticles from the surface layer.}, language = {en} } @article{KravanjaKrieglHribaretal., author = {Kravanja, Gaia and Kriegl, Raphael and Hribar, Luka and Glavan, Gašper and Drevenšek-Olenik, Irena and Shamonin (Chamonine), Mikhail and Jezeršek, Matija}, title = {Magnetically Actuated Surface Microstructures for Efficient Transport and Tunable Separation of Droplets and Solids}, series = {Advanced Engineering Materials}, volume = {25}, journal = {Advanced Engineering Materials}, number = {22}, publisher = {Wiley-VCH}, issn = {1527-2648}, doi = {10.1002/adem.202301000}, pages = {1 -- 11}, abstract = {Efficient transportation of droplets (∽10 ¹ ̶̶̶̶ 10 ² µl) and small solid objects (∽10 ¹ ̶ 10 ² mm ³ ) have important applications in many fields, such as microfluidics, lab-on-a-chip devices, drug delivery, etc. A novel multifunctional surface consisting of a periodic array of micro-lamellae from a soft magnetoactive elastomer (MAE) on a plastic substrate is reported for these purposes. The physical origin of the propulsion is the bending of soft magnetic lamellae in non-uniform magnetic fields, which is also observed in uniform magnetic fields. The magnetoactive surface is fabricated using a facile and rapid method of laser ablation. The propulsion of items is realized using a four-pole rotating magnet. This results in a cyclic lamellar fringe motion over the micro-structured surface and brings an advantage of easy reciprocation of transport by rotation reversal. Two modes of object transportation are identified: "pushing" mode for precise control of droplet and solid positioning and "bouncing" mode for heavier solid objects transportation. A water droplet of 5 μl or a glass sphere with a 2.1 mm diameter can be moved at a maximum speed of 60 mm s ⁻¹ . The multifunctionality of the proposed mechatronic platform is demonstrated on the examples of selective solid-liquid separation and droplet merging.}, language = {en} } @article{KravanjaBelyaevaHribaretal., author = {Kravanja, Gaia and Belyaeva, Inna A. and Hribar, Luka and Drevenšek-Olenik, Irena and Shamonin (Chamonine), Mikhail and Jezeršek, Matija}, title = {Laser Micromachining of Magnetoactive Elastomers as Enabling Technology for Magnetoresponsive Surfaces}, series = {Advanced Materials Technologies}, volume = {7}, journal = {Advanced Materials Technologies}, number = {5}, publisher = {Wiley}, doi = {10.1002/admt.202101045}, pages = {1 -- 8}, abstract = {A simple method for structuring of the surface of a magnetoactive elastomer (MAE) on the tens of micrometers scale, which capabilities extend beyond conventional mold-based polymer casting, is reported. The method relies on the ablation of the material by absorption of nanosecond infrared pulses from a commercial laser. It is shown that it is possible to fabricate parallel lamellar structures with a high aspect ratio (up to 6:1) as well as structures with complex scanning trajectories. The method is fast (fabrication time for the 7 × 7 mm2 is about 60 s), and the results are highly reproducible. To illustrate the capabilities of the fabrication method, both orthogonal to the MAE surface and tilted lamellar structures are fabricated. These magnetosensitive lamellae can be easily bent by ±45° using an external magnetic field of about 230 mT. It is demonstrated that this bending allows one to control the sliding angle of water droplets in a great range between a sticky (>90°) and a sliding state (<20°). Perspectives on employing this fabrication technology for magnetosensitive smart surfaces in microfluidic devices and soft robotics are discussed.}, language = {en} } @article{KravanjaBelyaevaHribaretal., author = {Kravanja, Gaia and Belyaeva, Inna A. and Hribar, Luka and Drevenšek-Olenik, Irena and Jezeršek, Matija and Shamonin (Chamonine), Mikhail}, title = {Tunable Drop Splashing on Magnetoactive Elastomers}, series = {Advanced Materials Interfaces}, volume = {8}, journal = {Advanced Materials Interfaces}, number = {11}, publisher = {Wiley}, doi = {10.1002/admi.202100235}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-24504}, pages = {1 -- 7}, abstract = {The significant effect of an external dc magnetic field on the splashing behavior of ethanol drops impacting on the unstructured (flat) surface of soft magnetoactive elastomers (MAEs) is reported. The Weber number corresponding to the transition between the deposition and the splashing regime is reduced by ≈20\% in a moderate magnetic field of ≈300 mT. Alongside this effect, a two-fold increase of the initial deceleration of the ejection sheet is observed for the softest sample. The main underlying mechanism for the observed phenomena is believed to be the magnetic-field-induced stiffening of the MAEs. Further possible mechanisms are magnetically induced changes in the surface roughness and magnetic-field-induced plasticity (magnetic shape memory effect). The potential application areas are magnetically regulable wetting and magneto-responsive surfaces for controlling the drop splashing.}, language = {en} } @inproceedings{KravanjaBelyaevaHribaretal., author = {Kravanja, Gaia and Belyaeva, Inna A. and Hribar, Luka and Drevenšek-Olenik, Irena and Shamonin (Chamonine), Mikhail and Jezeršek, Matija}, title = {Adaptive Magneto-Responsive Surfaces Fabricated by Laser-Based Microstructuring}, series = {Proceedings of the ASME 2022 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2022): September 12-14, 2022, Dearborn, Michigan}, booktitle = {Proceedings of the ASME 2022 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2022): September 12-14, 2022, Dearborn, Michigan}, publisher = {ASME}, isbn = {978-0-7918-8627-4}, doi = {10.1115/SMASIS2022-90742}, pages = {6}, abstract = {Adaptive surface microstructures are used extensively in nature to control various surface properties such as wettability, adhesion, self-cleaning, drag reduction, etc. Regulation of these properties can be achieved with the appropriate employment of a multitude of smart materials, whose characteristics/response can be controlled by noncontact stimuli, e.g., light, heat, or magnetic field. One of the very promising magneto-regulable smart materials are magnetoactive elastomers (MAEs). They are comprised of a compliant polymer matrix with embedded micrometer-sized ferromagnetic particles. The particles interact with each other and a magnetic field. This results in remarkable tunability of the physical properties of MAEs. This paper reports a fast, resilient, and tailored method for direct surface micromachining of MAEs that enables micro-structuring without mechanical contact between the tool and the material, bypassing the usual constraints of conventional fabrication methods. It is shown that it is possible to fabricate a large variety of different microstructure geometries whose precision is limited predominantly by the size of magnetic particles. Lamellar structures with a high aspect ratio (up to 6:1) oriented either perpendicularly to the surface, can be strongly bent by applying magnetic fields in the range of 0-250 mT.}, language = {en} } @misc{KrieglKravanjaHribaretal., author = {Kriegl, Raphael and Kravanja, Gaia and Hribar, Luka and Jezeršek, Matija and Drevenšek-Olenik, Irena and Shamonin (Chamonine), Mikhail}, title = {Characterization of Wetting Properties of Magnetoactive Elastomer Surfaces}, series = {Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) - 2023, September 11-13, 2023 Austin, Texas, USA}, journal = {Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) - 2023, September 11-13, 2023 Austin, Texas, USA}, publisher = {The American Society of Mechanical Engineers}, address = {New York, USA}, isbn = {978-0-7918-8752-3}, doi = {10.1115/SMASIS2023-110998}, abstract = {Commercially available contact angle (CA) measuring devices usually do not allow for the application of magnetic fields to the sample under test. A setup for measuring the CA of liquids on magnetosensitive surfaces has been developed specifically for investigating the surfaces of magnetoactive elastomers (MAEs). The addition of a programmable linear stage, which moves a permanent magnet, allows for fine control of the magnetic field applied to the MAE without the need for large and power-consuming electromagnets. Paired with a custom control and evaluation software, this measurement setup operates semiautomatically, limiting operator error and increasing precision, speed, as well as repeatability of static and dynamic CA measurements for different magnetoactive materials. The software is equipped with robust droplet fitting algorithms to avoid experimental challenges arising with soft magnetoactive materials, such as the curling of sample edges or diffuse non-reflective surfaces. Several application examples on MAE surfaces, both processed and unprocessed, are presented.}, language = {en} } @article{GlavanBelyaevaDrevenšek‐Oleniketal., author = {Glavan, Gašper and Belyaeva, Inna A. and Drevenšek-Olenik, Irena and Shamonin (Chamonine), Mikhail}, title = {Experimental study of longitudinal, transverse and volume strains of magnetoactive elastomeric cylinders in uniform magnetic fields}, series = {Journal of Magnetism and Magnetic Materials}, volume = {579}, journal = {Journal of Magnetism and Magnetic Materials}, publisher = {Elsevier}, issn = {0304-8853}, doi = {10.1016/j.jmmm.2023.170826}, abstract = {Magnetoactive elastomers (MAEs) are promising materials for realization of magnetic field-controlled soft actuators. Herein, a systematic investigation of magnetic field-induced macroscopic deformations of soft MAE cylinders with a diameter of 15 mm in uniform quasi-static magnetic fields directed parallel to the cylinder's axis is reported. The measurements were based on image processing. Thirty-six MAE samples differing in the weight fraction of the iron filler (70 wt\%, 75 wt\% and 80 wt\%), alignment of filling particles, and the aspect ratio (0.2, 0.4, 0.6, 0.8, 1.0 and 1.2) were fabricated. MAE cylinders exhibited high relative change in height (up to 35\% in the field of 485 kA/m) and lateral contraction. The dependence of the maximum extensional strain on the aspect ratio was obtained and compared with theoretical considerations. A concave dent was formed on the free circular base in magnetic fields. This concavity was characterized experimentally. A significant volumetric strain of the order of magnitude of 10\% was calculated in MAEs for the first time. In consequently repeated magnetization cycles, the remanent extensional strain significantly increased after each cycle. The results are qualitatively discussed in the framework of the modern views on the magnetically induced macroscopic deformations of MAEs. The directions of further research are outlined.}, language = {en} } @article{HoernerKrykanovChashinetal., author = {H{\"o}rner, Eduard and Krykanov, Ivan M. and Chashin, Dmitri V. and Fetisov, Yuri K. and Fetisov, Leonid Y. and Shamonin (Chamonine), Mikhail}, title = {Magnetoelectric characteristics of cobalt-iron alloy-lead zirconate titanate bilayer planar structures}, series = {International Journal of Materials Research}, volume = {103}, journal = {International Journal of Materials Research}, number = {11}, publisher = {De Gruyter}, doi = {10.3139/146.110776}, abstract = {The characteristics of both direct and converse magnetoelectric (ME) interactions in bilayer composite structures comprising layers of a commercially available magnetostrictive permendur CoFe alloy and different piezoelectric PZT ceramics are investigated in detail by the method of harmonic field modulation. It is shown that, given the optimum DC magnetic bias field, a high piezomagnetic coefficient in the alloy leads to increased efficiency of ME interactions. The resonant behavior of frequency dependencies of the magnetoelectric voltage is explained by excitation of bending and planar mechanical oscillations in the structures. The results are of interest for developing highly sensitive AC magnetic field sensors and magnetoelectric transducers for energy harvesting from mechanical vibrations.}, language = {de} } @article{StrausKokotKravanjaetal., author = {Straus, Izidor and Kokot, Gašper and Kravanja, Gaia and Hribar, Luka and Kriegl, Raphael and Shamonin (Chamonine), Mikhail and Jezeršek, Matija and Drevenšek-Olenik, Irena}, title = {Dynamically tunable lamellar surface structures from magnetoactive elastomers driven by a uniform magnetic field}, series = {Soft Matter}, volume = {Vol. 19}, journal = {Soft Matter}, publisher = {Royal Society of Chemistry}, doi = {10.1039/D3SM00012E}, pages = {3357 -- 3365}, abstract = {Stimuli responsive materials are key ingredients for any application that requires dynamically tunable or on-demand responses. In this work we report experimental and theoretical investigation of magnetic-field driven modifications of soft-magnetic elastomers whose surface was processed by laser ablation into lamellar microstructures that can be manipulated by a uniform magnetic field. We present a minimal hybrid model that elucidates the associated deflection process of the lamellae and explains the lamellar structure frustration in terms of dipolar magnetic forces arising from the neighbouring lamellae. We experimentally determine the magnitude of the deflection as a function of magnetic flux density and explore the dynamic response of lamellae to fast changes in a magnetic field. A relationship between the deflection of lamellae and modifications of the optical reflectance of the lamellar structures is resolved.}, language = {en} } @article{StrausKravanjaHribaretal., author = {Straus, Izidor and Kravanja, Gaia and Hribar, Luka and Kriegl, Raphael and Jezeršek, Matija and Shamonin (Chamonine), Mikhail and Drevenšek-Olenik, Irena and Kokot, Gašper}, title = {Surface Modification of Magnetoactive Elastomers by Laser Micromachining}, series = {Materials}, volume = {2024}, journal = {Materials}, number = {17 / 7}, publisher = {MDPI AG}, address = {Basel, Switzerland}, doi = {10.3390/ma17071550}, pages = {12}, abstract = {It has been recently demonstrated that laser micromachining of magnetoactive elastomers is a very convenient method for fabricating dynamic surface microstructures with magnetically tunable properties, such as wettability and surface reflectivity. In this study, we investigate the impact of the micromachining process on the fabricated material's structural properties and its chemical composition. By employing scanning electron microscopy, we investigate changes in size distribution and spatial arrangement of carbonyl iron microparticles dispersed in the polydimethylsiloxane (PDMS) matrix as a function of laser irradiation. Based on the images obtained by a low vacuum secondary electron detector, we analyze modifications of the surface topography. The results show that most profound modifications occur during the low-exposure (8 J/cm^2) treatment of the surface with the laser beam. Our findings provide important insights for developing theoretical models of functional properties of laser-sculptured microstructures from magnetoactive elastomers.}, language = {en} } @inproceedings{KrieglJezeršekKravanjaetal., author = {Kriegl, Raphael and Jezeršek, Matija and Kravanja, Gaia and Hribar, Luka and Kokot, Gašper and Drevenšek-Olenik, Irena and Shamonin (Chamonine), Mikhail}, title = {Characterization of Tunable Rebound Properties of Microstructured Magnetoactive Elastomers}, series = {ASME 2024 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), September 9-11, 2024, Atlanta, Georgia, USA}, booktitle = {ASME 2024 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), September 9-11, 2024, Atlanta, Georgia, USA}, publisher = {American Society of Mechanical Engineers}, address = {New York, USA}, isbn = {978-0-7918-8832-2}, doi = {10.1115/SMASIS2024-139154}, abstract = {We present a novel method to control the rebounding behavior of small mm-sized solid balls by employing magnetoactive elastomers (MAEs) with microstructured surfaces. An MAE is a composite material consisting of μm-sized ferromagnetic particles dispersed in a soft elastomer (e.g., polydimethylsiloxane) matrix. In the act of rebounding, the ball hits an MAE surface and bounces back. The MAE samples contained 75 wt.\% of iron. This composite material is known to respond to an applied magnetic field with increased stiffness (due to the magnetorheological effect) and plasticity. To adjust the rebound properties, the top layer of the MAE material was additionally modified by micromachining lamellar structures with different dimensions on the 100 μm scale via laser ablation. Due to the resulting high aspect ratio, these surface structures were sensitive to the magnetic field direction. The lamellas could stand up straight or lay down flat. The rebound behavior was evaluated by using a custom build apparatus that facilitates dropping of the balls in a precise and repeatable manner. A ball was dropped from different heights. The ball trajectory was captured with a high-speed camera to investigate the rebound properties. The recorded video was processed using a custom software written in Python. The experimental procedure and data processing algorithms are presented in detail. The results for the samples with different geometrical dimensions are provided as examples. It is made evident that the magnetic field influences the rebound properties of small non-magnetic balls impinging microstructured MAE surfaces. The change in surface topography is an effective way to control the ball rebound. The fabrication flexibility in geometrical dimensions of surface microstructures opens a convenient way to tune the desired response to magnetic fields. The presented idea may find applications in impact mitigation or small-scale sorting machinery, e.g. for recycling.}, language = {en} } @article{LovšinBrandlGlavanetal., author = {Lovšin, Matija and Brandl, Dominik and Glavan, Gašper and Belyaeva, Inna A. and Cmok, Luka and Coga, Lucija and Kalin, Mitjan and Shamonin (Chamonine), Mikhail and Drevenšek-Olenik, Irena}, title = {Reconfigurable Surface Micropatterns Based on the Magnetic Field-Induced Shape Memory Effect in Magnetoactive Elastomers}, series = {Polymers}, volume = {13}, journal = {Polymers}, number = {24}, publisher = {MDPI}, doi = {10.3390/polym13244422}, abstract = {A surface relief grating with a period of 30 mu m is embossed onto the surface of magnetoactive elastomer (MAE) samples in the presence of a moderate magnetic field of about 180 mT. The grating, which is represented as a set of parallel stripes with two different amplitude reflectivity coefficients, is detected via diffraction of a laser beam in the reflection configuration. Due to the magnetic-field-induced plasticity effect, the grating persists on the MAE surface for at least 90 h if the magnetic field remains present. When the magnetic field is removed, the diffraction efficiency vanishes in a few minutes. The described effect is much more pronounced in MAE samples with larger content of iron filler (80 wt\%) than in the samples with lower content of iron filler (70 wt\%). A simple theoretical model is proposed to describe the observed dependence of the diffraction efficiency on the applied magnetic field. Possible applications of MAEs as magnetically reconfigurable diffractive optical elements are discussed. It is proposed that the described experimental method can be used as a convenient tool for investigations of the dynamics of magnetically induced plasticity of MAEs on the micrometer scale.}, language = {en} } @inproceedings{HolthausHagedornKlanketal., author = {Holthaus, Carsten and Hagedorn, Oliver and Klank, Michael and Shamonin (Chamonine), Mikhail and Trifonov, A. and D{\"o}tsch, Horst}, title = {Preparation and Characterization of Sensitive Magnetic Garnet Films for MOI Applications}, series = {Magneto-Optical Imaging. Proceedings of the NATO Advanced Research Workshop on Magneto-Optical Imaging, {\O}ystese, Norway, 28 - 30 August 2003}, booktitle = {Magneto-Optical Imaging. Proceedings of the NATO Advanced Research Workshop on Magneto-Optical Imaging, {\O}ystese, Norway, 28 - 30 August 2003}, publisher = {Kluwer}, address = {Dodrecht}, doi = {10.1007/978-94-007-1007-8_42}, pages = {329 -- 336}, abstract = {Magnetic garnet films prepared by liquid phase epitaxy on paramagnetic substrates of gadolinium gallium garnet are currently used for the imaging of magnetic field distributions. This application is based on the Faraday rotation which can be strongly enhanced by bismuth incorporation. For gray scale imaging the plane of the sensor film should be an easy plane of magnetization so that no domains nucleate. However, incorporation of bismuth induces a strong positive uniaxial anisotropy perpendicular to the film plane, especially if films of [111] orientation are used. To counteract this unwanted behavior neodymium and/or praseodymium are substituted in addition to bismuth. These two elements cause a very strong negative anisotropy. This is tested experimentally by growing series of garnet films with gradually changing composition and growth parameters.}, language = {en} } @article{BodnarukBrunhuberKalitaetal., author = {Bodnaruk, Andrii V. and Brunhuber, Alexander and Kalita, Viktor M. and Kulyk, Mykola M. and Snarskii, Andrei A. and Lozenko, Albert F. and Ryabchenko, Sergey M. and Shamonin (Chamonine), Mikhail}, title = {Temperature-dependent magnetic properties of a magnetoactive elastomer: Immobilization of the soft-magnetic filler}, series = {Journal of Applied Physics}, volume = {123}, journal = {Journal of Applied Physics}, number = {11}, publisher = {AIP Publishing}, doi = {10.1063/1.5023891}, abstract = {The magnetic properties of a magnetoactive elastomer (MAE) filled with mu m-sized soft-magnetic iron particles have been experimentally studied in the temperature range between 150 K and 310 K. By changing the temperature, the elastic modulus of the elastomer matrix was modified, and it was possible to obtain magnetization curves for an invariable arrangement of particles in the sample and in the case when the particles were able to change their position within the MAE under the influence of magnetic forces. At low (less than 220 K) temperatures, when the matrix becomes rigid, the magnetization of the MAE does not show a hysteresis behavior, and it is characterized by a negative value of the Rayleigh constant. At room temperature, when the polymer matrix is compliant, a magnetic hysteresis exists where the dependence of the differential magnetic susceptibility on the magnetic field exhibits local maxima. The appearance of these maxima is explained by the elastic resistance of the matrix to the displacement of particles under the action of magnetic forces.}, language = {en} } @misc{ScharfenbergMottokArtmannetal., author = {Scharfenberg, Georg and Mottok, J{\"u}rgen and Artmann, Christina and Hobelsberger, Martin and Paric, Ivan and Großmann, Benjamin and Pohlt, Clemens and Wackerbarth, Alena and Pausch, Uli and Heidrich, Christiane and Fadanelli, Martin and Elsner, Michael and P{\"o}cher, Daniel and Pittroff, Lenz and Beer, Stefan and Br{\"u}ckl, Oliver and Haslbeck, Matthias and Sterner, Michael and Thema, Martin and Muggenthaler, Nicole and Lenck, Thorsten and G{\"o}tz, Philipp and Eckert, Fabian and Deubzer, Michael and Stingl, Armin and Simsek, Erol and Kr{\"a}mer, Stefan and Großmann, Benjamin and Schlegl, Thomas and Niedersteiner, Sascha and Berlehner, Thomas and Joblin, Mitchell and Mauerer, Wolfgang and Apel, Sven and Siegmund, Janet and Riehle, Dirk and Weber, Joachim and Palm, Christoph and Zobel, Martin and Al-Falouji, Ghassan and Prestel, Dietmar and Scharfenberg, Georg and Mandl, Roland and Deinzer, Arnulf and Halang, W. and Margraf-Stiksrud, Jutta and Sick, Bernhard and Deinzer, Renate and Scherzinger, Stefanie and Klettke, Meike and St{\"o}rl, Uta and Wiech, Katharina and Kubata, Christoph and Sindersberger, Dirk and Monkman, Gareth J. and Dollinger, Markus and Dembianny, Sven and K{\"o}lbl, Andreas and Welker, Franz and Meier, Matthias and Thumann, Philipp and Swidergal, Krzysztof and Wagner, Marcus and Haug, Sonja and Vernim, Matthias and Seidenst{\"u}cker, Barbara and Weber, Karsten and Arsan, Christian and Schone, Reinhold and M{\"u}nder, Johannes and Schroll-Decker, Irmgard and Dillinger, Andrea Elisabeth and Fuchshofer, Rudolf and Monkman, Gareth J. and Shamonin (Chamonine), Mikhail and Geith, Markus A. and Koch, Fabian and {\"U}hlin, Christian and Schratzenstaller, Thomas and Saßmannshausen, Sean Patrick and Auchter, Eberhard and Kriz, Willy and Springer, Othmar and Thumann, Maria and Kusterle, Wolfgang and Obermeier, Andreas and Udalzow, Anton and Schmailzl, Anton and Hierl, Stefan and Langer, Christoph and Schreiner, Rupert}, title = {Forschungsbericht 2015}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-00-048589-3}, doi = {10.35096/othr/pub-1386}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-13867}, language = {de} } @article{ShamoninChamonineKlankHagedornetal., author = {Shamonin (Chamonine), Mikhail and Klank, Michael and Hagedorn, Oliver and D{\"o}tsch, Horst}, title = {Magneto-optical visualization of metal-loss defects in a ferromagnetic plate: experimental verification of theoretical modeling}, series = {Applied optics}, volume = {40}, journal = {Applied optics}, number = {19}, publisher = {Optica Publishing Group}, doi = {10.1364/ao.40.003182}, pages = {3182 -- 3189}, abstract = {Rare-earth iron garnet films with in-plane magnetic anisotropy grown on [111]-oriented substrates are promising for the visualization of magnetic leakage fields in nondestructive evaluation. Such magneto-optical films have to be specifically engineered, and we give an example of this technology. To assess the validity and accuracy of finite-element calculations of a magnetization assembly combined with the physical modeling of the image formation, comparisons between calculated and experimentally obtained magneto-optical images of metal-loss defects have been made. A convincing quantitative agreement is demonstrated. It is shown that both physical and computer modeling techniques allow for a predictive engineering design of the prospective applications and provide greater insight into the method.}, language = {en} } @article{BodnarukAndriiVBrunhuberetal., author = {Bodnaruk, and Andrii V., and Brunhuber, Alexander and Kalita, Viktor M. and Kulyk, Mykola M. and Kurzweil, Peter and Snarskii, Andrei A. and Lozenko, Albert F. and Ryabchenko, Sergey M. and Shamonin (Chamonine), Mikhail}, title = {Magnetic anisotropy in magnetoactive elastomers, enabled by matrix elasticity}, series = {Polymer}, volume = {162}, journal = {Polymer}, number = {January}, publisher = {Elsevier}, doi = {10.1016/j.polymer.2018.12.027}, pages = {63 -- 72}, abstract = {Polydimethylsiloxane based magnetoactive elastomers demonstrate above the melting transition range (e.g. at room temperature) an induced uniaxial magnetic anisotropy, which grows with increasing magnetic field. By freezing a material down to 150 K, displaced iron microparticles are immobilized, so that the magnetic anisotropy can be measured. Magnetic anisotropy "constant" is a consequence of particle displacements and a characteristic of the energy of internal deformations in the polymer matrix. The maximum anisotropy constant of the filling is at least one order of magnitude larger than the shear modulus of the pure elastomer (matrix). In a magnetic field, the gain in the rigidity of the composite material is attributed to the magnetomechanical coupling, which is in turn a source of anisotropy. The concept of effective magnetic field felt by the magnetization allows one to explain the magnetization curve at room temperature from low-temperature measurements. The results can be useful for developing vibration absorbers and isolators.}, language = {en} } @inproceedings{DoetschKlankHagedornetal., author = {D{\"o}tsch, Horst and Klank, Michael and Hagedorn, Oliver and Holthaus, Carsten and Shamonin (Chamonine), Mikhail and Trifonov, A.}, title = {Optimization of Magnetic Garnet Films for Magneto-Optical Imaging of Magnetic Field Distributions}, series = {Magneto-Optical Imaging. Proceedings of the NATO Advanced Research Workshop on Magneto-Optical Imaging, {\O}ystese, Norway, 28 - 30 August 2003}, booktitle = {Magneto-Optical Imaging. Proceedings of the NATO Advanced Research Workshop on Magneto-Optical Imaging, {\O}ystese, Norway, 28 - 30 August 2003}, publisher = {KLuwer}, address = {Dodrecht}, doi = {10.1007/978-94-007-1007-8_39}, pages = {301 -- 309}, abstract = {Rare-earth iron garnet films are currently applied for magneto-optical imaging of magnetic field distributions. The physical properties of the films can be controlled by the chemical composition, the growth conditions and the crystallographic orientation. The sensor properties must be optimized according to the application desired. A new optimization method is introduced based on the swing of the photoresponse. An application example is presented. Furthermore, the sensitivity can be strongly enhanced using specific crystallographic orientations which induce an easy plane of magnetization being tilted with respect to the film plane. Experimental results of a [112] oriented garnet film are in good agreement with calculations. The influence of the cubic anisotropy on the sensor performance is discussed. Finally, it is shown that also domain films can be applied for magneto-optical imaging.}, language = {en} } @article{KlankHagedornHolthausetal., author = {Klank, Michael and Hagedorn, Oliver and Holthaus, Carsten and Shamonin (Chamonine), Mikhail and D{\"o}tsch, Horst}, title = {Characterization and optimization of magnetic garnet films for magneto-optical visualization of magnetic field distributions}, series = {NDT \& E International}, volume = {36}, journal = {NDT \& E International}, number = {6}, publisher = {Elsevier}, doi = {10.1016/S0963-8695(03)00012-4}, pages = {375 -- 381}, abstract = {Rare-earth iron garnet films with in-plane anisotropy grown on (111)-oriented substrates can be used as magneto-optical indicator films for visualization of magnetic leakage fields in nondestructive evaluation. The influence of Faraday rotation, Faraday ellipticity, absorption and film thickness on the performance of a magneto-optical indicator film is investigated. A new optimization method is introduced and compared with the method of contrast optimization. The theory is experimentally verified and an application example is presented.}, language = {en} } @article{KrieglKravanjaHribaretal., author = {Kriegl, Raphael and Kravanja, Gaia and Hribar, Luka and Čoga, Lucija and Drevenšek-Olenik, Irena and Jezeršek, Matija and Kalin, Mitjan and Shamonin (Chamonine), Mikhail}, title = {Microstructured Magnetoactive Elastomers for Switchable Wettability}, series = {Polymers}, volume = {14}, journal = {Polymers}, number = {18}, publisher = {MDPI}, doi = {10.3390/polym14183883}, pages = {1 -- 21}, abstract = {We demonstrate the control of wettability of non-structured and microstructured magnetoactive elastomers (MAEs) by magnetic field. The synthesized composite materials have a concentration of carbonyl iron particles of 75 wt.\% (≈27 vol.\%) and three different stiffnesses of the elastomer matrix. A new method of fabrication of MAE coatings on plastic substrates is presented, which allows one to enhance the response of the apparent contact angle to the magnetic field by exposing the particle-enriched side of MAEs to water. A magnetic field is not applied during crosslinking. The highest variation of the contact angle from (113 ± 1)° in zero field up to (156 ± 2)° at about 400 mT is achieved in the MAE sample with the softest matrix. Several lamellar and pillared MAE structures are fabricated by laser micromachining. The lateral dimension of surface structures is about 50 µm and the depth varies between 3 µm and 60 µm. A systematic investigation of the effects of parameters of laser processing (laser power and the number of passages of the laser beam) on the wetting behavior of these structures in the absence and presence of a magnetic field is performed. In particular, strong anisotropy of the wetting behavior of lamellar structures is observed. The results are qualitatively discussed in the framework of the Wenzel and Cassie-Baxter models. Finally, directions of further research on magnetically controlled wettability of microstructured MAE surfaces are outlined. The obtained results may be useful for the development of magnetically controlled smart surfaces for droplet-based microfluidics.}, language = {en} } @article{ShamoninChamonineBeukerRosenetal., author = {Shamonin (Chamonine), Mikhail and Beuker, T. and Rosen, P. and Klank, Michael and Hagedorn, Oliver and D{\"o}tsch, Horst}, title = {Feasibility of magneto-optic flaw visualization using thin garnet films}, series = {NDT \& E International}, volume = {33}, journal = {NDT \& E International}, number = {8}, publisher = {Elsevier}, doi = {10.1016/s0963-8695(00)00028-1}, pages = {547 -- 553}, abstract = {We investigate the feasibility of using rare-earth iron garnet films grown on (111)-oriented substrates as magneto-optic indicator films for the visualization of magnetic leakage fields in non-destructive evaluation. In most cases the leakage field of the defect has a strong component in the film plane. The influence of this in-plane dc magnetic field on the image formation is investigated. It is shown that the presence of a strong in-plane magnetic field allows one to extend the dynamic range of the out-of-plane field imposed by the uniaxial anisotropy field HA. On the other hand, an in-plane field reduces the sensitivity. The guidelines for selecting parameters of magneto-optic indicator films are given.}, language = {en} } @article{KlankHagedornShamoninChamonineetal., author = {Klank, Michael and Hagedorn, Oliver and Shamonin (Chamonine), Mikhail and Rosen, H. and D{\"o}tsch, Horst}, title = {Sensitive magneto-optical sensors for visualization of magnetic fields using garnet films of specific orientations}, series = {Journal of Applied Physics}, volume = {92}, journal = {Journal of Applied Physics}, publisher = {AIP}, doi = {10.1063/1.1516839}, abstract = {Garnet films of high Faraday rotation are applied as magneto-optical sensors to visualize the spatial distribution of magnetic fields. Using specific orientations, the induced anisotropy can generate an easy plane of magnetization which is inclined with respect to the film plane. If the magnetization lies in this plane a very high sensitivity can be achieved. The dependence of the geometrical orientation of the easy plane on the growth direction is calculated and the sensitivity and dynamic range are derived. Experimental results of a [112] oriented garnet film are in good agreement with calculations.}, language = {en} } @inproceedings{DoetschHolthausTrifonovetal., author = {D{\"o}tsch, Horst and Holthaus, Carsten and Trifonov, A. and Klank, Michael and Hagedorn, Oliver and Shamonin (Chamonine), Mikhail and Sch{\"u}tzmann, J.}, title = {Application of Magnetic Garnet Films for Magnetooptical Imaging of Magnetic Field Distributions}, series = {MRS Online Proceedings Library}, booktitle = {MRS Online Proceedings Library}, publisher = {Springer}, doi = {10.1557/PROC-834-J6.1}, pages = {18 -- 29}, abstract = {Rare-earth iron garnet films of high quality can be grown by liquid phase epitaxy on paramagnetic substrates of gadolinium galliumgarnet. Such films are currently used for imaging of the spatial distribution of magnetic fields. This application is based on the Faraday rotation which can strongly be enhanced by bismuth incorporation. The physical properties of the films can be controlled by the chemical composition, the growth conditions and the crystallographic orientation. The sensor properties like sensitivity, dynamic range, signal linearity and unambiguity must be optimized according to the application desired. These properties, however, are not independent of each other. In addition, they strongly depend on the optical wavelength. Thus, it is necessary to find compromises. The influence of Faraday rotation, Faraday ellipticity, optical absorption, magnetic anisotropies and film thickness on the performance of a magnetooptical indicator film is investigated. Based on the swing of the photoresponse, a new optimization process is introduced. The process is experimentally verified and application examples are demonstrated. Furthermore, two methods are presented to enhance the sensitivity of magnetooptical sensors. Using specific crystallographic orientations, an easy plane of magnetization can be induced which is inclined with respect to the film plane. If the magnetization lies in this plane a very high sensitivity is achieved. The dependence of the geometrical orientation of the easy plane on the growth direction is calculated and the sensitivity and dynamic range are derived. Experimental results of a [112] oriented garnet film are in good agreement with calculations. Garnet films which are magnetized along the film normal due to a strong induced uniaxial anisotropy support magnetic domains. If the collapse field perpendicular to the film plane is small, such films can be used as very sensitive indicator films. Such films are easier to prepare than sensitive in-plane films. However, the spatial resolution is limited by the size of the domains. This disadvantage can be avoided by applying a bias field in the film plane. Directly at the in-plane collapse field the sensor film is in-plane magnetized yielding high spatial resolution at still high sensitivity. The variation of magnetooptical images with in-plane induction is demonstrated. Experimental results are in agreement with calculations.}, language = {en} } @misc{MauererRexhepajMonkmanetal., author = {Mauerer, Wolfgang and Rexhepaj, Tanja and Monkman, Gareth J. and Sindersberger, Dirk and Diermeier, Andreas and Neidhart, Thomas and Wolfrum, Dominik and Sterner, Michael and Heberl, Michael and Nusko, Robert and Maier, Georg and Nagl, Klaus and Reuter, Monika and Hofrichter, Andreas and Lex, Thomas and Lesch, Florian and Kieninger, B{\"a}rbel and Szalo, Alexander Eduard and Zehner, Alexander and Palm, Christoph and Joblin, Mitchell and Apel, Sven and Ramsauer, Ralf and Lohmann, Daniel and Westner, Markus and Strasser, Artur and Munndi, Maximilian and Ebner, Lena and Elsner, Michael and Weiß, Nils and Segerer, Matthias and Hackenberg, Rudolf and Steger, Sebastian and Schmailzl, Anton and Dostalek, Michael and Armbruster, Dominik and Koch, Fabian and Hierl, Stefan and Thumann, Philipp and Swidergal, Krzysztof and Wagner, Marcus and Briem, Ulrich and Diermeier, Andreas and Spreitzer, Stefan and Beiderbeck, Sabrina and Hook, Christian and Zobel, Martin and Weber, Tim and Groß, Simon and Penzkofer, Rainer and Dendorfer, Sebastian and Schillitz, Ingo and Bauer, Thomas and Rudolph, Clarissa and Schmidt, Katja and Liebetruth, Thomas and Hamer, Markus and Haug, Sonja and Vernim, Matthias and Weber, Karsten and Saßmannshausen, Sean Patrick and Books, Sebastian and Neuleitner, Nikolaus and Rechenauer, Christian and Steffens, Oliver and Kusterle, Wolfgang and G{\"o}mmel, Roland and Wellnitz, Felix and Stierstorfer, Johannes and Stadler, Dominik and Hofmann, Matthias J. and Motschmann, Hubert and Shamonin (Chamonine), Mikhail and Bleicher, Veronika and Fischer, Sebastian and Hackenberg, Rudolf and Horn, Anton and Kawasch, Raphael and Petzenhauser, Michael and Probst, Tobias and Udalzow, Anton and Dams, Florian and Schreiner, Rupert and Langer, Christoph and Prommesberger, Christian and Ławrowski, Robert Damian}, title = {Forschungsbericht 2016}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, doi = {10.35096/othr/pub-1384}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-13840}, language = {de} } @misc{LautenschlaegerLeisDendorferetal., author = {Lautenschl{\"a}ger, Toni and Leis, Alexander and Dendorfer, Sebastian and Palm, Christoph and Schreiner, Rupert and Langer, Christoph and Prommesberger, Christian and Ławrowski, Robert Damian and Dams, Florian and Bornmann, Benjamin and Navitski, Aliaksandr and Serbun, Pavel and M{\"u}ller, G{\"u}nter and Liebetruth, Thomas and Kohlert, Dieter and Pernsteiner, Jochen and Schreier, Franz and Heerklotz, Sabrina and Heerklotz, Allwin and Boos, Alexander and Herwald, Dominik and Monkman, Gareth J. and Treiber, Daniel and Mayer, Matthias and H{\"o}rner, Eva and Bentz, Alexander and Shamonin (Chamonine), Mikhail and Johansen, S{\o}ren Peter and Reichel, Marco and Stoll, Andrea and Briem, Ulrich and Dullien, Silvia and Renkawitz, Tobias and Weber, Tim and Dendorfer, Sebastian and Grifka, Joachim and Penzkofer, Rainer and Barnsteiner, K. and Jovanovik, M. and Wernecke, P. and V{\"o}gele, A. and Bachmann, T. and Pl{\"o}tz, Martin and Schliekmann, Claus and Wels, Harald and Helmberger, Paul and Kaspar, Marcel and H{\"o}nicka, M. and Schrammel, Siegfried and Enser, Markus and Schmidmeier, Monika and Schroll-Decker, Irmgard and Haug, Sonja and Gelfert, Verena and Vernim, Matthias}, title = {Forschungsbericht 2012}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, doi = {10.35096/othr/pub-783}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-7834}, pages = {64}, language = {de} } @inproceedings{LangerHausladenPrommesbergeretal., author = {Langer, Christoph and Hausladen, Matthias and Prommesberger, Christian and Ławrowski, Robert Damian and Bachmann, Michael and D{\"u}sberg, Felix and Pahlke, Andreas and Shamonin (Chamonine), Mikhail and Schreiner, Rupert}, title = {Field emission current investigation of p-type and metallized silicon emitters in the frequency domain}, series = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, publisher = {IEEE}, doi = {10.1109/IVNC.2018.8520127}, pages = {1-2}, abstract = {We investigated two different field emitter arrays consisting of 10×10 p-type and 10×10 undoped Au-coated high aspect ratio silicon tips. The I-V characterization of the p-type sample showed a pronounced saturation for voltages higher than 500 V and a maximum emission current of 39 nA. The metallized sample revealed a FN-like emission up to several μA. The metallized and the p-type sample operating below the saturation region showed high current fluctuations of ±16\%. Whereas, the metallized sample with current regulation and the p-type sample in the saturation yielded a current stability of ±0.4\% and ±0.3\%, respectively. Investigations in the frequency domain revealed the for field emission typical 1/f-noise. By operating in the saturation region (p-type sample) or using an emission current regulation (metallized sample) the noise level was reduced by at least 20 dB. Finally, the p-type sample was illuminated by a light emitting diode to increase and modulate the emission current in the saturation region. The emission current was increased by a factor of 3.7 to 145 nA. With this configuration we emulated an unstable emission behavior and evaluated the performance of our emission current regulation circuit.}, language = {en} } @article{LohmeyerShamoninChamonineHertel, author = {Lohmeyer, Manfred and Shamonin (Chamonine), Mikhail and Hertel, Peter}, title = {Boundary conditions for the finite difference beam propagation method based on plane wave solutions of the Fresnel equation}, series = {IEEE Journal of Quantum Electronics}, volume = {33}, journal = {IEEE Journal of Quantum Electronics}, number = {2}, issn = {0018-9197}, doi = {10.1109/3.552269}, pages = {279 -- 286}, abstract = {Each particular implementation of the beam propagation method (BPM) requires a special procedure allowing for radiation to leave the computational window. We propose a new approach to constructing the finite difference schemes of the BPM at the boundary of the computational window. These schemes are independent of the computed fields and allow for a similar treatment of both interior and boundary points. The new approach can be further improved by correcting the field values at the boundary points according to Hadley's method. The algorithm is easy to implement for both two- and three-dimensional structures. The new method considerably reduces computation times because the propagation matrices remain constant in longitudinally invariant sections, thus avoiding repeated LU-decompositions. The basic idea-establishing the finite difference scheme such that locally exact, approximate, or plausible solutions are recovered-may be of interest for other efforts to solve partial differential equations by the finite difference method.}, language = {en} } @article{ShamoninChamonineLohmeyerHertel, author = {Shamonin (Chamonine), Mikhail and Lohmeyer, Manfred and Hertel, Peter}, title = {Analysis of power-dependent switching between radiatively coupled planar waveguides}, series = {Journal of Lightwave Technology}, volume = {15}, journal = {Journal of Lightwave Technology}, number = {6}, publisher = {IEEE}, address = {New York}, doi = {10.1109/50.588671}, pages = {983 -- 989}, abstract = {Effective coupling between two remote optical waveguides without branching sections can be achieved in a three-guide system with multimode central waveguide. We investigate the nonlinear power switching of c.w. laser radiation by such radiatively coupled waveguides. It is shown that effective all-optical switches with spatially well separated input/output channels can be realized although the influence of multimode interference on the switching characteristics becomes more pronounced for increasing thickness of the central guide. Different coupling regimes are specified, and the changes in switching characteristics during the transformation from one regime to another is studied. Numerical calculations for the critical power are compared with an approximate analytical expression. It is also shown that, at a moderate input power, a small number of modes determines the switching behavior.}, language = {en} } @article{LohmeyerShamoninChamonineBahlmannetal., author = {Lohmeyer, Manfred and Shamonin (Chamonine), Mikhail and Bahlmann, N. and Hertel, Peter and Dotsch, H.}, title = {Radiatively Coupled Waveguide Concept for an Integrated Magneto-Optic Circulator}, series = {MRS Online Proceedings Library}, journal = {MRS Online Proceedings Library}, number = {517}, issn = {1946-4274}, doi = {10.1557/PROC-517-519}, pages = {519 -- 524}, abstract = {Three-guide couplers with multimode central waveguides allow for remote coupling between optical channels. A simple three mode approximation turns out to be sufficient for the description of the main features of the power transfer behavior. The specific form of the relevant modes suggests the design of integrated optical isolators and circulators based on magnetic garnet materials. These novel devices are superior to conventional nonreciprocal couplers with respect to the total length and admissible fabrication tolerances. We characterize the isolation performance and the transmission loss for the proposed devices by propagating mode simulations and estimate the influence of geometry parameter deviations.}, language = {en} } @article{ShamoninChamonineLohmeyerHertel, author = {Shamonin (Chamonine), Mikhail and Lohmeyer, Manfred and Hertel, Peter}, title = {Directional coupler based on radiatively coupled waveguides}, series = {Applied optics (Appl. Opt.)}, volume = {36}, journal = {Applied optics (Appl. Opt.)}, number = {3}, doi = {10.1364/ao.36.000635}, pages = {635 -- 641}, abstract = {We investigate a system of two waveguides with leaky modes sharing a common substrate (radiatively coupled waveguides). The main advantage of such a system is the possibility of remote coupling. A perturbation theory is developed for both TE and TM polarization. Numerical calculations of dispersion curves and of the coupling length allow us to determine the limitations of the perturbation theory. We study the influence of multimode interference on the process of beating by considering the propagation of a given initial field. Finally, we propose a new design for an effective, integrated optical TE-TM polarization splitter.}, language = {en} } @misc{SorokinStepanovVasilievetal., author = {Sorokin, Vladislav V. and Stepanov, Gennady V. and Vasiliev, V. G. and Kramarenko, Elena Yu and Mayer, Matthias and Shamonin (Chamonine), Mikhail and Monkman, Gareth J.}, title = {Investigation of Dynamic Modulus and Normal Force of Magnetorheological Elastomers with Soft and Hard Magnetic Fillers}, series = {NANO 2014, July 13 - 18, 2014, Moscow ; Section 06 - Polymer, Organic and Other Soft Matter Materials}, journal = {NANO 2014, July 13 - 18, 2014, Moscow ; Section 06 - Polymer, Organic and Other Soft Matter Materials}, address = {Moscow}, language = {en} } @inproceedings{ForsterMayerRabindranathetal., author = {Forster, Eva and Mayer, Matthias and Rabindranath, Raman and Bentz, Alexander and B{\"o}se, Holger and Shamonin (Chamonine), Mikhail and Monkman, Gareth J.}, title = {Surface Control Magneto-Active Polymers (MAP)}, series = {EuroEAP 2011, First international conference on Electromechanically Active Polymer (EAP) transducers \& artificial muscles, Pisa, 8-9 June}, booktitle = {EuroEAP 2011, First international conference on Electromechanically Active Polymer (EAP) transducers \& artificial muscles, Pisa, 8-9 June}, abstract = {Smart materials change their properties with external energy supply. Besides the known ferro-fluids and Magneto Rheological Fluid (MRF) also the Electro Active Polymer (EAP) and Magneto Rheological Elastomer (MRE) belong to these intelligent materials. The latest generation of magnetic elastomers represents a new class of composite materials. This consists of small magnetized particles which are sized in the micron or even nanometer range that in turn is bounded in a highly elastic rubber matrix. These materials are very often called MRE. Only recently, it has managed to develop these materials even further, so that very soft composite materials with a young?s modulus up to 10 kPa are possible. These soft polymers could be named magneto-active polymers. The combination of polymers with magnetic materials show novel and often enhanced properties. A precisely controllable young?s modulus and hardness, giant and non-homogeneous deformation behavior and rapid response to the magnetic field opens up new possibilities for various applications. Since MAP represent a very new technology, the behavior of these materials as a function of their composition and external conditions so far are not yet sufficiently understood. Therefore, some fundamental studies are necessary. In this paper, the mechanical surface properties are studied using a micro hardness meter. This work shows the possibility to control mechanical properties at the surface of MAP with new developed magnetic systems.}, language = {en} } @article{RadkovskayaSydorukShamoninChamonineetal., author = {Radkovskaya, Anna A. and Sydoruk, O. and Shamonin (Chamonine), Mikhail and Shamonina, Ekaterina and Stevens, C. J. and Faulkner, Grahame and Edwards, David J. and Solymar, L.}, title = {Experimental study of a bi-periodic magnetoinductive waveguide: comparison with theory}, series = {IET Microwaves, Antennas \& Propagation}, volume = {1}, journal = {IET Microwaves, Antennas \& Propagation}, number = {1}, publisher = {IET}, issn = {1751-8733}, doi = {10.1049/iet-map:20050289}, pages = {80 -- 83}, abstract = {Magnetoinductive waves propagating along a line consisting of two kinds of metamaterial elements are studied. Both elements are made up by the same metallic loop but are loaded by different capacitors resulting in different resonant frequencies. The dispersion characteristics are derived from phase and amplitude measurements for the cases when the line consists of (i) identical elements and (ii) of alternating elements. Both planar (elements in the same plane as the axis of the line) and axial (elements perpendicular to the axis of the line) configurations are investigated. It is shown that in the bi-periodic arrangement of the elements, the dispersion curves have a forward wave in the lower frequency branch and a backward wave in the upper frequency branch independent of the configuration whether it is planar or axial. Comparisons between theoretical and experimental results show good agreement.}, language = {en} } @inproceedings{MayerForsterRabindranathetal., author = {Mayer, Matthias and Forster, Eva and Rabindranath, Raman and Bentz, Alexander and B{\"o}se, Holger and Shamonin (Chamonine), Mikhail and Monkman, Gareth J.}, title = {Highly compliant Magneto-Active Polymers (MAPs)}, series = {Actuator'11, Bremen, May 2011}, booktitle = {Actuator'11, Bremen, May 2011}, language = {en} }