@misc{BeimlerLeisslEbneretal., author = {Beimler, Josef and Leißl, Caroline and Ebner, Lena and Elsner, Michael and M{\"u}hlbauer, Gerhard and Kohlert, Dieter and Schubert, Martin J. W. and Weiß, Andreas P. and Sterner, Michael and Raith, Thomas and Afranseder, Martin and Krapf, Tobias and Mottok, J{\"u}rgen and Siemers, Christian and Großmann, Benjamin and H{\"o}cherl, Johannes and Schlegl, Thomas and Schneider, Ralph and Milaev, Johannes and Rampelt, Christina and Roduner, Christian and Glowa, Christoph and Bachl, Christoph and Schliekmann, Claus and Gnan, Alfons and Grill, Martin and Ruhland, Karl and Piehler, Thomas and Friers, Daniel and Wels, Harald and Pflug, Kenny and Kucera, Markus and Waas, Thomas and Schlachetzki, Felix and Boy, Sandra and Pemmerl, Josef and Leis, Alexander and Welsch, Andreas F.X. and Graf, Franz and Zenger, Gerhard and Volbert, Klaus and Waas, Thomas and Scherzinger, Stefanie and Klettke, Meike and St{\"o}rl, Uta and Heyl, C. and Boldenko, A. and Monkman, Gareth J. and Kujat, Richard and Briem, Ulrich and Hierl, Stefan and Talbot, Sebastian and Schmailzl, Anton and Ławrowski, Robert Damian and Prommesberger, Christian and Langer, Christoph and Dams, Florian and Schreiner, Rupert and Valentino, Piergiorgio and Romano, Marco and Ehrlich, Ingo and Furgiuele, Franco and Gebbeken, Norbert and Eisenried, Michael and Jungbauer, Bastian and Hutterer, Albert and Bauhuber, Michael and Mikrievskij, Andreas and Argauer, Monika and Hummel, Helmut and Lechner, Alfred and Liebetruth, Thomas and Schumm, Michael and Joseph, Saskia and Reschke, Michael and Soska, Alexander and Schroll-Decker, Irmgard and Putzer, Michael and Rasmussen, John and Dendorfer, Sebastian and Weber, Tim and Al-Munajjed, Amir Andreas and Verkerke, Gijsbertus Jacob and Renkawitz, Tobias and Haug, Sonja and Rudolph, Clarissa and Zeitler, Annika and Schaubeck, Simon and Steffens, Oliver and Rechenauer, Christian and Schulz-Brize, Thekla and Fleischmann, Florian and Kusterle, Wolfgang and Beer, Anne and Wagner, Bernd and Neidhart, Thomas}, title = {Forschungsbericht 2013}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, doi = {10.35096/othr/pub-799}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-7990}, pages = {80}, language = {de} } @misc{MauererRexhepajMonkmanetal., author = {Mauerer, Wolfgang and Rexhepaj, Tanja and Monkman, Gareth J. and Sindersberger, Dirk and Diermeier, Andreas and Neidhart, Thomas and Wolfrum, Dominik and Sterner, Michael and Heberl, Michael and Nusko, Robert and Maier, Georg and Nagl, Klaus and Reuter, Monika and Hofrichter, Andreas and Lex, Thomas and Lesch, Florian and Kieninger, B{\"a}rbel and Szalo, Alexander Eduard and Zehner, Alexander and Palm, Christoph and Joblin, Mitchell and Apel, Sven and Ramsauer, Ralf and Lohmann, Daniel and Westner, Markus and Strasser, Artur and Munndi, Maximilian and Ebner, Lena and Elsner, Michael and Weiß, Nils and Segerer, Matthias and Hackenberg, Rudolf and Steger, Sebastian and Schmailzl, Anton and Dostalek, Michael and Armbruster, Dominik and Koch, Fabian and Hierl, Stefan and Thumann, Philipp and Swidergal, Krzysztof and Wagner, Marcus and Briem, Ulrich and Diermeier, Andreas and Spreitzer, Stefan and Beiderbeck, Sabrina and Hook, Christian and Zobel, Martin and Weber, Tim and Groß, Simon and Penzkofer, Rainer and Dendorfer, Sebastian and Schillitz, Ingo and Bauer, Thomas and Rudolph, Clarissa and Schmidt, Katja and Liebetruth, Thomas and Hamer, Markus and Haug, Sonja and Vernim, Matthias and Weber, Karsten and Saßmannshausen, Sean Patrick and Books, Sebastian and Neuleitner, Nikolaus and Rechenauer, Christian and Steffens, Oliver and Kusterle, Wolfgang and G{\"o}mmel, Roland and Wellnitz, Felix and Stierstorfer, Johannes and Stadler, Dominik and Hofmann, Matthias J. and Motschmann, Hubert and Shamonin (Chamonine), Mikhail and Bleicher, Veronika and Fischer, Sebastian and Hackenberg, Rudolf and Horn, Anton and Kawasch, Raphael and Petzenhauser, Michael and Probst, Tobias and Udalzow, Anton and Dams, Florian and Schreiner, Rupert and Langer, Christoph and Prommesberger, Christian and Ławrowski, Robert Damian}, title = {Forschungsbericht 2016}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, doi = {10.35096/othr/pub-1384}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-13840}, language = {de} } @misc{ScharfenbergMottokArtmannetal., author = {Scharfenberg, Georg and Mottok, J{\"u}rgen and Artmann, Christina and Hobelsberger, Martin and Paric, Ivan and Großmann, Benjamin and Pohlt, Clemens and Wackerbarth, Alena and Pausch, Uli and Heidrich, Christiane and Fadanelli, Martin and Elsner, Michael and P{\"o}cher, Daniel and Pittroff, Lenz and Beer, Stefan and Br{\"u}ckl, Oliver and Haslbeck, Matthias and Sterner, Michael and Thema, Martin and Muggenthaler, Nicole and Lenck, Thorsten and G{\"o}tz, Philipp and Eckert, Fabian and Deubzer, Michael and Stingl, Armin and Simsek, Erol and Kr{\"a}mer, Stefan and Großmann, Benjamin and Schlegl, Thomas and Niedersteiner, Sascha and Berlehner, Thomas and Joblin, Mitchell and Mauerer, Wolfgang and Apel, Sven and Siegmund, Janet and Riehle, Dirk and Weber, Joachim and Palm, Christoph and Zobel, Martin and Al-Falouji, Ghassan and Prestel, Dietmar and Scharfenberg, Georg and Mandl, Roland and Deinzer, Arnulf and Halang, W. and Margraf-Stiksrud, Jutta and Sick, Bernhard and Deinzer, Renate and Scherzinger, Stefanie and Klettke, Meike and St{\"o}rl, Uta and Wiech, Katharina and Kubata, Christoph and Sindersberger, Dirk and Monkman, Gareth J. and Dollinger, Markus and Dembianny, Sven and K{\"o}lbl, Andreas and Welker, Franz and Meier, Matthias and Thumann, Philipp and Swidergal, Krzysztof and Wagner, Marcus and Haug, Sonja and Vernim, Matthias and Seidenst{\"u}cker, Barbara and Weber, Karsten and Arsan, Christian and Schone, Reinhold and M{\"u}nder, Johannes and Schroll-Decker, Irmgard and Dillinger, Andrea Elisabeth and Fuchshofer, Rudolf and Monkman, Gareth J. and Shamonin (Chamonine), Mikhail and Geith, Markus A. and Koch, Fabian and {\"U}hlin, Christian and Schratzenstaller, Thomas and Saßmannshausen, Sean Patrick and Auchter, Eberhard and Kriz, Willy and Springer, Othmar and Thumann, Maria and Kusterle, Wolfgang and Obermeier, Andreas and Udalzow, Anton and Schmailzl, Anton and Hierl, Stefan and Langer, Christoph and Schreiner, Rupert}, title = {Forschungsbericht / Ostbayerische Technische Hochschule Regensburg}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-00-048589-3}, doi = {10.35096/othr/pub-1386}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-13867}, language = {de} } @misc{AppelhansKampmannMottoketal., author = {Appelhans, Marie-Luise and Kampmann, Matthias and Mottok, J{\"u}rgen and Riederer, Michael and Nagl, Klaus and Steffens, Oliver and D{\"u}nnweber, Jan and Wildgruber, Markus and Roth, Julius and Stadler, Timo and Palm, Christoph and Weiß, Martin Georg and Rochholz, Sandra and Bierl, Rudolf and Gschossmann, Andreas and Haug, Sonja and Schmidbauer, Simon and Koch, Anna and Westner, Markus and Bary, Benedikt von and Ellermeier, Andreas and V{\"o}gele, Daniel and Maiwald, Frederik and Hierl, Stefan and Schlamp, Matthias and Ehrlich, Ingo and Siegl, Marco and H{\"u}ntelmann, Sven and Wildfeuer, Matthias and Br{\"u}ckl, Oliver and Sterner, Michael and Hofrichter, Andreas and Eckert, Fabian and Bauer, Franz and Dawoud, Belal and Rabl, Hans-Peter and Gamisch, Bernd and Schmidt, Ottfried and Heberl, Michael and Thema, Martin and Mayer, Ulrike and Eller, Johannes and Sippenauer, Thomas and Adelt, Christian and Haslbeck, Matthias and Vogl, Bettina and Mauerer, Wolfgang and Ramsauer, Ralf and Lohmann, Daniel and Sax, Irmengard and Gabor, Thomas and Feld, Sebastian and Linnhoff-Popien, Claudia and Ławrowski, Robert Damian and Langer, Christoph and Schreiner, Rupert and Sellmair, Josef}, title = {Forschung 2019}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-9818209-7-3}, doi = {10.35096/othr/pub-789}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-7890}, pages = {72}, abstract = {Bericht mit Forschungsprojekten aus verschiedenen Bereichen der OTH Regensburg mit dem Schwerpunktthema "K{\"u}nstliche Intelligenz" und einem Gespr{\"a}ch zur "Medizin der Zukunft"}, subject = {Forschung}, language = {de} } @article{SternerSpecht, author = {Sterner, Michael and Specht, Michael}, title = {Power-to-Gas and Power-to-X-The History and Results of Developing a New Storage Concept}, series = {Energies}, volume = {14}, journal = {Energies}, number = {20}, publisher = {MDPI}, doi = {10.3390/en14206594}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-26202}, abstract = {Germany's energy transition, known as 'Energiewende', was always very progressive. However, it came technically to a halt at the question of large-scale, seasonal energy storage for wind and solar, which was not available. At the end of the 2000s, we combined our knowledge of both electrical and process engineering, imitated nature by copying photosynthesis and developed Power-to-Gas by combining water electrolysis with CO2-methanation to convert water and CO2 together with wind and solar power to synthetic natural gas. Storing green energy by coupling the electricity with the gas sector using its vast TWh-scale storage facility was the solution for the biggest energy problem of our time. This was the first concept that created the term 'sector coupling' or 'sectoral integration'. We first implemented demo sites, presented our work in research, industry and ministries, and applied it in many macroeconomic studies. It was an initial idea that inspired others to rethink electricity as well as eFuels as an energy source and energy carrier. We developed the concept further to include Power-to-Liquid, Power-to-Chemicals and other ways to 'convert' electricity into molecules and climate-neutral feedstocks, and named it 'Power-to-X'at the beginning of the 2010s.}, language = {en} } @article{ThemaWeidlichHoerletal., author = {Thema, Martin and Weidlich, Tobias and H{\"o}rl, Manuel and Bellack, Annett and M{\"o}rs, Friedemann and Hackl, Florian and Kohlmayer, Matthias and Gleich, Jasmin and Stabenau, Carsten and Trabold, Thomas and Neubert, Michael and Ortloff, Felix and Brotsack, Raimund and Schmack, Doris and Huber, Harald and Hafenbradl, Doris and Karl, J{\"u}rgen and Sterner, Michael}, title = {Biological CO2-Methanation: An Approach to Standardization}, series = {Energies}, volume = {12}, journal = {Energies}, number = {9}, publisher = {MDPI}, doi = {10.3390/en12091670}, pages = {1 -- 32}, abstract = {Power-to-Methane as one part of Power-to-Gas has been recognized globally as one of the key elements for the transition towards a sustainable energy system. While plants that produce methane catalytically have been in operation for a long time, biological methanation has just reached industrial pilot scale and near-term commercial application. The growing importance of the biological method is reflected by an increasing number of scientific articles describing novel approaches to improve this technology. However, these studies are difficult to compare because they lack a coherent nomenclature. In this article, we present a comprehensive set of parameters allowing the characterization and comparison of various biological methanation processes. To identify relevant parameters needed for a proper description of this technology, we summarized existing literature and defined system boundaries for Power-to-Methane process steps. On this basis, we derive system parameters providing information on the methanation system, its performance, the biology and cost aspects. As a result, three different standards are provided as a blueprint matrix for use in academia and industry applicable to both, biological and catalytic methanation. Hence, this review attempts to set the standards for a comprehensive description of biological and chemical methanation processes.}, language = {en} } @techreport{SternerBauerHofrichteretal., author = {Sterner, Michael and Bauer, Franz and Hofrichter, Andreas and Heberl, Michael}, title = {Systemanalyse und -integration Power-to-X im Kontext von erneuerbarer Elektrizit{\"a}t als Prim{\"a}renergie (SPIKE)}, pages = {87}, abstract = {Durch das in Paris beschlossene Ziel, die globale mittlere Temperatur auf deutlich unter 2 Grad Celsius gegen{\"u}ber dem vorindustriellen Niveau zu begrenzen, ist ein Ausstieg aus der Nutzung fossiler Energietr{\"a}ger und Rohstoffe bis zum Jahr 2050 notwendig (WBGU 2016). Daher hat sich die Bundesregierung das Ziel gesetzt, bis zur Mitte des Jahrhunderts eine weitgehende Treibhausgasneutralit{\"a}t zu erreichen. Hierzu ist neben einer Steigerung der Energieeffizienz in allen Sektoren ein Ausbau erneuerbaren Energien notwendig. Dies beinhaltet haupts{\"a}chlich den Zubau von Wind- und Solarstromanlagen. Somit gewinnt die Sektorkopplung immer mehr an Bedeutung und wird in Zukunft eine tragende Rolle f{\"u}r die Defossilisierung des Energiesystems spielen (BMUB 2016). Als zentrales Element der Sektorkopplung gilt Strom, der {\"u}ber Power-to-X (PtX) sowohl energetisch im W{\"a}rme-, und Verkehrssektor als auch stofflich in der Industrie und vor allem im Chemiesektor eingesetzt werden kann (Ausfelder et al. 2018a). Im Rahmen des P2X-Vorhabens der Kopernikus Forschungsinitiative wird die Sektorkopplung durch die Umwandlung von Strom mittels elektrochemischer Prozesse in stoffliche Ressourcen wie Wasserstoff, Synthesegas oder Kohlenstoffmonoxid untersucht. Der Schwerpunkt liegt auf der Betrachtung der Kopplung von Strom und Verkehr sowie Strom und Chemie und der Untersuchung von Prozessen und Pfaden, die aus {\"o}kologischer, {\"o}konomischer und gesellschaftlicher Sicht vorteilhaft sind. Eine vergleichende Einordnung in den Gesamtkontext der Energiewende mit Abw{\"a}gung zahlreicher Alternativen und Konkurrenztechnologien ist dort allerdings nicht vorgesehen. Zudem werden einige relevante PtX-Technologien wie Power-to-Heat nicht betrachtet. Aus diesem Grund wurden in SPIKE erg{\"a}nzende PtX-Technologiepfade aus systemanalytischer Sicht untersucht. Dies sind Power-to-Heat (PtH) und Power-to-Gas (PtG) {\"u}ber Elektrolyse und optionaler anschließender Methanisierung sowie die Herstellung ausgew{\"a}hlter Pfade der strombasierten Herstellung von Produkten der energieintensiven Industrie. Ziel des Forschungsvorhabens war die Analyse von PtX-Technologien und Pfaden, deren vergleichende Einordnung im Gesamtkontext der Energiewende sowie die Unterst{\"u}tzung des P2X Roadmapping Prozesses und die Ableitung von Handlungsempfehlungen. Ein besonderer Schwerpunkt lag auf dem Einsatz von PtX im Industriesektor. F{\"u}r das Vorhaben wurden Arbeitspakete (AP) erstellt, die Untersuchungen zu Technologie, Potenzial, {\"O}konomie und {\"O}kologie von PtH (AP 1), PtG (AP 2), Power-to-Ammoniak, Power-to-Ethen und Power-to-Propen (AP 3) umfassten. Daraus wurde in AP 4 ein Systemvergleich mit Einordnung von PtX in die Energiewende durchgef{\"u}hrt. Auf dieser Basis und der Identifizierung regulatorischer Rahmenbedingungen f{\"u}r PtX (AP 5) wurde das deutsche Energiesystem samt PtX-Pfaden in einem Energiesystemmodell abgebildet (AP 6). Die Ergebnisse flossen in das Roadmapping ein (AP 7). Zudem erfolgte ein Austausch mit den Projektpartnern und das Verfassen wissenschaftlicher Abhandlungen (AP 8).}, language = {de} } @techreport{ThemaKaulSterneretal., author = {Thema, Martin and Kaul, Anja and Sterner, Michael and Heberl, Michael}, title = {Optimierung eines Rieselbett-Bioreaktors f{\"u}r die dynamische mikrobielle Biosynthese von Methan mit Archaeen-Mikroorganismen in Power-to-Gas-Anlagen}, doi = {10.2314/KXP:1815321555}, abstract = {Das {\"u}bergeordnete Ziel des Vorhabens war die Entwicklung neuer technologischer M{\"o}glichkeiten f{\"u}r den biologischen Methanisierungsprozess mit Archaeen1 in Power-to-Gas-Anwendungen. Im Gegensatz zur technisch ausgereiften chemisch-katalytischen Methanisierung sind hier noch Potenziale zur Optimierung verfahrenstechnischer und biologischer Prozesse f{\"u}r das Speicherkonzept Power-to-Gas [7] vorhanden. Dabei sollte zum einen ein Rieselbett-Bioreaktor optimiert, simuliert und f{\"u}r die Hochskalierung vorbereitet werden. Zum anderen sollte eine Kombination optimal geeigneter Mikroorganismen und Packungsmaterialien selektiert und deren Verhalten und Eignung im Reaktor analysiert werden. Das Verhalten des entwickelten Systems sollte zun{\"a}chst im Labor- und Technikumsmaßstab und anschließend im Feldtest an einer bestehenden Power-to-Gas-Anlage untersucht werden. Hauptziel w{\"a}hrend des Feldtests war die Produktion von einspeisef{\"a}higem Methan sowie dessen Einspeisung ins Gasnetz. Ein Hauptziel des Projektes war es, die Normung und Standardisierung notwendiger Systemparameter und Semantik zur Beschreibung und Einbindung biologischer Methanisierungseinheiten in Power-to-Gas-Anlagen voranzutreiben. Dies sollte zum einen die Vergleichbarkeit der wissenschaftlichen Erkenntnisse verbessern und zum anderen unterst{\"u}tzend bei der Kommerzialisierung der Technologie wirken. Aus dem Projekt heraus wurde so die neue Normungsreihe VDI 4635 Power-to-X beim Verein Deutscher Ingenieure angestoßen.}, language = {de} } @inproceedings{GaertnerRankHeberletal., author = {G{\"a}rtner, Sebastian and Rank, Daniel and Heberl, Michael and Gaderer, Matthias and Sterner, Michael}, title = {Integration of Power-To-Methane into Glass Melting Processes}, series = {Proceedings of the International Renewable Energy Storage Conference (IRES 2022)}, volume = {16}, booktitle = {Proceedings of the International Renewable Energy Storage Conference (IRES 2022)}, publisher = {Atlantis Press}, issn = {2589-4943}, doi = {10.2991/978-94-6463-156-2_12}, pages = {147 -- 161}, abstract = {The glass industry is facing increased challenges regarding climate protection targets and rising energy costs. The integration of renewable energy including conversion and storage is a key for both challenges in this energy-intensive industrial sector, which has been mainly relying on fossil gas so far. The options considered to this point for reducing CO2 emissions and switching to a renewable energy supply involve far-reaching changes of the established melting processes. This entails significant risks in terms of influences on glass quality and stable production volumes. The presented approach for the integration of a Power-to-Methane (PtM) system into the glass industry is a completely new concept and has not been considered in detail before. It allows the use of established oxyfuel melting processes, the integration of fluctuating renewable energy sources and a simultaneous reduction of CO2 emissions by more than 78\%. At the same time, natural gas purchases become obsolete. A techno-economic evaluation of the complete PtM process shows, that 1,76 €/m3 or 1,26 €/kg synthetic natural gas are possible with renewable energy supply. Using electricity from the energy grid would require electricity prices < 0,126 €/kWh to allow cost competitive PtM processes in the glass industry. Such electricity prices could be achieved by electricity market-based optimization and operation of the PtM system. This operation strategy would require AI-based algorithms predicting availabilities and prices on future-based markets.}, language = {en} } @techreport{RankHeberlSterner, author = {Rank, Daniel and Heberl, Michael and Sterner, Michael}, title = {Die CO2-Bilanz der OTH [Ostbayerischen Technische Hochschule Regenburg]}, language = {de} } @misc{SternerHeberl, author = {Sterner, Michael and Heberl, Michael}, title = {The ORBIT-Project: Biological methanation in a trickle-bed reactor - key results and next steps}, series = {5th Nuremberg Workshop on Methanation and 2nd Generation, N{\"u}rnberg Friedrich-Alexander-Universit{\"a}t, 28.05.2021}, journal = {5th Nuremberg Workshop on Methanation and 2nd Generation, N{\"u}rnberg Friedrich-Alexander-Universit{\"a}t, 28.05.2021}, organization = {Friedrich-Alexander-Universit{\"a}t Erlangen-N{\"u}rnberg / Lehrstuhl f{\"u}r Energieverfahrenstechnik}, language = {en} } @article{GaertnerRankHeberletal., author = {G{\"a}rtner, Sebastian and Rank, Daniel and Heberl, Michael and Gaderer, Matthias and Dawoud, Belal and Haumer, Anton and Sterner, Michael}, title = {Simulation and Techno-Economic Analysis of a Power-to-Hydrogen Process for Oxyfuel Glass Melting}, series = {Energies}, volume = {14}, journal = {Energies}, number = {24}, publisher = {MDPI}, doi = {10.3390/en14248603}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-22713}, abstract = {As an energy-intensive industry sector, the glass industry is strongly affected by the increasingly stringent climate protection targets. As established combustion-based production systems ensure high process stability and glass quality, an immediate switch to low greenhouse gas emission processes is difficult. To approach these challenges, this work investigates a step-by-step integration of a Power-to-Hydrogen concept into established oxyfuel glass melting processes using a simulation approach. This is complemented by a case study for economic analysis on a selected German glass industry site by simulating the power production of a nearby renewable energy park and subsequent optimization of the power-to-hydrogen plant performance and capacities. The results of this study indicate, that the proposed system can reduce specific carbon dioxide emissions by up to 60\%, while increasing specific energy demand by a maximum of 25\%. Investigations of the impact of altered combustion and furnace properties like adiabatic flame temperature (+25 °C), temperature efficiency (∆ξ = -0.003) and heat capacity flow ratio (∆zHL = -0.009) indicate that pure hydrogen-oxygen combustion has less impact on melting properties than assumed so far. Within the case study, high CO2 abatement costs of 295 €/t CO2-eq. were determined. This is mainly due to the insufficient performance of renewable energy sources. The correlations between process scaling and economic parameters presented in this study show promising potential for further economic optimization of the proposed energy system in the future.}, language = {en} } @article{HofrichterRankHeberletal., author = {Hofrichter, Andreas and Rank, Daniel and Heberl, Michael and Sterner, Michael}, title = {Determination of the optimal power ratio between electrolysis and renewable energy to investigate the effects on the hydrogen production costs}, series = {International Journal of Hydrogen Energy}, volume = {48}, journal = {International Journal of Hydrogen Energy}, number = {5}, publisher = {Elsevier}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2022.09.263}, pages = {1651 -- 1663}, abstract = {Green hydrogen via renewable powered electrolysis has a high relevance in decarbonization and supply security. Achieving economically competitive hydrogen production costs is a major challenge in times of an energy price crisis. Our objective is to show the economically optimal installed capacity of electrolysers in relation to wind and solar power so swift and credible statements can be made regarding the system design. The ratio between renewable generation and electrolysis power as well as scaling effects, operating behaviour and development of costs are considered. Hydrogen production costs are calculated for four exemplary real PV and wind sites and different ratios of electrolysis to renewable power for the year 2020. The ideal ratio for PV systems is between 14\% and 73\% and for wind between 3.3\% and 143\% for low and high full load hours. The lowest hydrogen production costs are identified at 2.53 €/kg for 50 MW wind power and 72 MW electrolysis power. The results provide plant constructors the possibility to create a cost-optimized design via an optimum ratio of electrolysis to renewable capacity. Therefore, the procedures for planning and dimensioning of selected systems can be drastically simplified.}, language = {en} } @unpublished{HeberlWithelmKauletal., author = {Heberl, Michael and Withelm, Christian and Kaul, Anja and Rank, Daniel and Sterner, Michael}, title = {Prospective Life Cycle Assessment of Biological Methanation in a Trickle-Bed Pilot Plant and a Potential Scale-Up}, publisher = {SSRN}, doi = {10.2139/ssrn.4635066}, abstract = {In this study, a pilot-scale trickle-bed reactor for biological methanation and various scale-up scenarios for 2023 and 2050 were investigated using LCA. A best- and worst-case scenario for technology development until 2050 was evolved using cross consistency analysis and morphological field, based on which the data for the ecological models were determined.The results show that the plant scale-up has a very positive effect on the ecological consequences of methanation. In the best-case scenario, the values are a factor of 23-780 lower than those of the actual plant today. A hot-spot analysis showed that especially electrolysis operation has a large impact on total emissions. The final Monte-Carlo simulation shows that the technology is likely to achieve a low GWP with a median of 104.0 kg CO2-eq / MWh CH4.}, language = {en} } @article{TrostSternerBruckner, author = {Trost, Tobias and Sterner, Michael and Bruckner, Thomas}, title = {Impact of electric vehicles and synthetic gaseous fuels on final energy consumption and carbon dioxide emissions in Germany based on long-term vehicle fleet modelling}, series = {Energy}, volume = {141}, journal = {Energy}, publisher = {Elsevier}, issn = {0360-5442}, doi = {10.1016/j.energy.2017.10.006}, pages = {1215 -- 1225}, abstract = {Based on a prospective scenario analysis, possible vehicle fleet developments for the individual motor car traffic (vehicle categories N1 and M1) are investigated for Germany in order to determine the long-term vehicle fleet structure, final energy demand, and related carbon dioxide emissions until the year 2050. In this framework, a vehicle fleet model was developed which combines a bottom-up consumer demand model with a dynamic stock-flow approach. Special emphasis is thereby given to different electric power-trains and synthetic gaseous fuels based on the power-to-gas technology. In detail, two different main scenarios are developed and, in addition, the impact of different carbon dioxide taxation levels of fossil fuels on the vehicle fleet structure are analysed. The scenario results reveal a broad range of possible future vehicle fleet structures. In the short to medium timeframe, the internal combustion engine dominates the fleet as a result of efficiency improvements and an increased use of natural gas as automotive fuel. The development of electric power-trains is initially marked by hybrid vehicles, whereas battery electric vehicles dominate the fleet structure in the long-term. Under favourable conditions, also synthetic gaseous fuels are competitive which can reduce carbon dioxide emissions even further.}, language = {en} } @incollection{SternerThema, author = {Sterner, Michael and Thema, Martin}, title = {Comparison of Storage Systems}, series = {Handbook of Energy Storage}, volume = {6}, booktitle = {Handbook of Energy Storage}, editor = {Sterner, Michael and Stadler, Ingo}, publisher = {Springer}, address = {Berlin, Heidelberg}, isbn = {978-3-662-55503-3}, doi = {10.1007/978-3-662-55504-0_12}, pages = {637 -- 672}, abstract = {There are several approaches to classifying energy storage systems (see Chaps. 1 and 2). Storage systems are used in a large number of different technologies at various stages of development, and in a wide range of application areas (see Chaps. 3 to 5). This chapter compares the capabilities of the different storage systems using the following criteria:This comparison of storage systems also provides a convenient overview of the various storage systems and their capabilities.}, language = {en} } @misc{Sterner, author = {Sterner, Michael}, title = {Gas aus einer Gesamtenergieversorgungsperspektive - Warum wir Power-to-X f{\"u}r die Klimaneutralit{\"a}t brauchen}, series = {Kopernikus-Konferenz Projekt "Ensure" (Deutsche Umwelthilfe), 15. April 2021}, journal = {Kopernikus-Konferenz Projekt "Ensure" (Deutsche Umwelthilfe), 15. April 2021}, language = {de} } @article{KeinerBreyerSterner, author = {Keiner, Dominik and Breyer, Christian and Sterner, Michael}, title = {Coupling heat and electricity storage technologies for cost and self-consumption optimised residential PV prosumer systems in Germany}, series = {International Journal of Sustainable Energy Planning and Management}, volume = {21}, journal = {International Journal of Sustainable Energy Planning and Management}, publisher = {OJS/PKP}, doi = {10.5278/ijsepm.2019.21.4}, abstract = {Coupling energy sectors within the emerging residential PV prosumer systems is necessary for an optimised use of the houseowners' own produced electricity. But the pure availability of different energy technologies in the system is not enough. By optimising the electricity usage as well as the capacities of PV generators, storage technologies, heat pumps and battery electric vehicles, not only the best solution in a technical point of view can be achieved, the need of finding the most financially beneficial system composition for single-family houses and tenements is possible. The study provides a detailed model for average German single-family houses and tenements and results for the energy transition period until 2050 for the optimised energy systems regarding optimised PV and stationary battery capacities and different heat storage capacities. Most noticeable outcomes can be observed by using a vehicle-to-home car, where a car can mostly take over the tasks of a stationary battery and by introducing a solidarity model using this type of car in tenement systems.}, language = {en} } @unpublished{GaertnerMarxSchubachGadereretal., author = {G{\"a}rtner, Sebastian and Marx-Schubach, Thomas and Gaderer, Matthias and Schmitz, Gerhard and Sterner, Michael}, title = {Introduction of an Innovative Energy Concept for low Emission Glass Melting based on Carbon Capture and Usage}, doi = {10.31224/2642}, abstract = {Due to the very high fossil energy demand, the glass industry is looking for innovative approaches for the reduction of CO2 emissions and the integration of renewable energy sources. In this paper, we present a novel power-to-gas concept, which has no impact on established melting processes and discuss it for this purpose. A special focus is set on the required CO2 capture from typical flue gases in the glass industry, as this process has not been investigated in detail yet. We used a process simulation approach to investigate post-combustion CO2 capture by absorption processes, followed by a techno-economic evaluation. Our investigations found the designed CO2 capture plant to be approx. 400 times smaller than absorption based CO2 separation processes for conventional power plants. Due to the many options for waste heat utilization, the waste heat required for CO2 desorption can be generated in a particularly efficient and cost-effective way. The resulting CO2 avoidance costs range between 41-42 €/t CO2, depending on waste heat utilization for desorption, and thus offer a cost effective way of CO2 removal from glass industry melting processes. These costs are well below the values of 50-65 €/t CO2 described so far for comparable industrial applications. In addition, we describe optimization options, like solvent and process improvements, to enable further cost reductions. These results motivate further research and development on the overall process presented in this work.}, language = {en} } @article{KaulBoellmannThemaetal., author = {Kaul, Anja and Boellmann, Andrea and Thema, Martin and Kalb, Larissa and Stoeckl, Richard and Huber, Harald and Sterner, Michael and Bellack, Annett}, title = {Combining a robust thermophilic methanogen and packing material with high liquid hold-up to optimize biological methanation in trickle-bed reactors}, series = {Bioresource technology}, volume = {345}, journal = {Bioresource technology}, publisher = {Elsevier}, doi = {10.1016/j.biortech.2021.126524}, abstract = {The hydrogen gas-to-liquid mass transfer is the limiting factor in biological methanation. In trickle-bed reactors, mass transfer can be increased by high flow velocities in the liquid phase, by adding a packing material with high liquid hold-up or by using methanogenic archaea with a high methane productivity. This study developed a polyphasic approach to address all methods at once. Various methanogenic strains and packings were investigated from a microbial and hydrodynamic perspective. Analyzing the ability to produce high-quality methane and to form biofilms, pure cultures of Methanothermobacter performed better than those of the genus Methanothermococcus. Liquid and static hold-up of a packing material and its capability to facilitate attachment was not attributable to a single property. Consequently, it is recommended to carefully match organism and packing for optimized performance of trickle-bed reactors. The ideal combination for the ORBIT system was identified as Methanothermobacter thermoautotrophicus IM5 and DuraTop (R).}, language = {en} } @misc{Sterner, author = {Sterner, Michael}, title = {Insight into Power-to-Gas/Liquids: a solution for sustainable transport besides e-mobility}, series = {Conference Low Carbon Transport - Engineering the Fuels of the Future (Institution of Mechanical Engineers), London 09.07.2019}, journal = {Conference Low Carbon Transport - Engineering the Fuels of the Future (Institution of Mechanical Engineers), London 09.07.2019}, publisher = {Institution of Mechanical Engineers}, address = {London}, language = {en} } @techreport{SternerThemaEckertetal., author = {Sterner, Michael and Thema, Martin and Eckert, Fabian and Moser, Albert and Sch{\"a}fer, Andreas and Drees, Tim and Christian Rehtanz, and Ulf H{\"a}ger, and Kays, Jan and Seack, Andr{\´e} and Dirk Uwe Sauer, and Matthias Leuthold, and Philipp St{\"o}cker,}, title = {Stromspeicher in der Energiewende - Untersuchung zum Bedarf an neuen Stromspeichern in Deutschland f{\"u}r den Erzeugungsausgleich, Systemdienstleistungen und im Verteilnetz}, publisher = {Agora Energiewende}, address = {Berlin}, doi = {10.13140/RG.2.2.31804.56964}, abstract = {Wie groß ist der Speicherbedarf in Deutschland in der weiteren Umsetzung der Energiewende? Welche Rolle spielen Batteriespeicher, Pumpspeicher, Power-to-Gas etc. im Kontext anderer Flexibilit{\"a}tsoptionen auf den verschiedenen Netzebenen? Wie entwickelt sich der Markt f{\"u}r Batterien und Wasserstoff? In unserer Agora-Speicherstudie haben wir auch erstmalig den Begriff Power-to-X definiert und damit die bis dato entstandenen Begriffe Power-to-Gas, Power-to-Liquids, Power-to-Products, Power-to-Chemicals etc. zusammengefasst.}, language = {de} } @incollection{SternerEckertHenningetal., author = {Sterner, Michael and Eckert, Fabian and Henning, Hans-Martin and Trost, Tobias}, title = {Storage Demand in the Transport and Chemical Sector}, series = {Handbook of Energy Storage}, booktitle = {Handbook of Energy Storage}, editor = {Sterner, Michael and Stadler, Ingo}, publisher = {Springer}, address = {Berlin, Heidelberg}, isbn = {978-3-662-55503-3}, doi = {10.1007/978-3-662-55504-0_5}, pages = {165 -- 188}, abstract = {In the transport sector, energy transition is still in its beginnings: shares of renewable fuels are at 5\% and are, with the exception of a small percentage in electrical rail transport, almost entirely restricted to biofuel. The transport sector, i.e., road, air, shipping, and rail traffic, consumes around 30\% of all final energy in Germany and its dependency of over 90\% on petroleum is still very high. As a result, its shares in greenhouse gas emissions are at 20\%. The necessary structural change in mobility, based on energy transition, is closely linked to the question of operating energy and of energy storage also. Aside from vehicles directly powered by wind or solar energy, mobility without storage is not possible: fuel tanks in cars, gas stations, and airplanes are omnipresent. The focus of the considerations on storage demand in the transport sector is on the question of how these storages can be used with renewable energies via bio and synthetic fuels, and on the question of how much storage is necessary for these new drive technologies, such as e-mobility. Before this, mobility needs today and in future need to be examined. In the chemical sector, the situation is very much alike: there is a great dependency on fossil resources, and decarbonization is inevitable to achieve ambitious climate goals. The structural change to convert and store renewable electricity as primary energy via power-to-X (PtX) represents a storage demand. First estimates will conclude this chapter.}, language = {en} } @incollection{SternerBreuerDreesetal., author = {Sterner, Michael and Breuer, Christopher and Drees, Tim and Eckert, Fabian and Maaz, Andreas and Pape, Carsten and Rotering, Niklas and Thema, Martin}, title = {Storage Demand in Power Supply}, series = {Handbook of Energy Storage}, booktitle = {Handbook of Energy Storage}, editor = {Sterner, Michael and Stadler, Ingo}, publisher = {Springer}, address = {Berlin, Heidelberg}, isbn = {978-3-662-55503-3}, doi = {10.1007/978-3-662-55504-0_3}, pages = {51 -- 136}, abstract = {Energy storage systems (in the past as well as today) are one significant part in the energy supply. The following three chapters describe how storage demand will develop in the future for the electricity, heat, and traffic sectors, as well as for non-energetic consumption of fossil resources (the chemical industry). Chapter 3, the core of this section on storage demand, makes clear how and why the electricity sector is the nucleus of the energy supply of all sectors and why it creates essential bridges between electricity, heat, and transport sectors, as well as with the chemical industry. If planned electricity network expansion takes place and flexibilities in generation and consumption are fully exploited, the demand for electricity storage, according to present estimates, will only reach a significant scale at 60-80\% shares of renewable energy in the power supply. Network expansion has a great impact on the storage demand, as well as flexible power generation in power plants, combined heat and power (CHP), and flexible consumption via demand-side management (DSM). Four studies in the context of storage demand and the role of energy storage systems for flexibility are comprehensively addressed. The authors and the co-authors were themselves participants in these studies, which will be complemented by ongoing research. A meta-study summary of the main results is shown in Abschn. 3.7, and these results are compared with seven further studies.}, language = {en} } @incollection{Sterner, author = {Sterner, Michael}, title = {Energy Storage Through the Ages}, series = {Handbook of Energy Storage}, booktitle = {Handbook of Energy Storage}, editor = {Sterner, Michael and Stadler, Ingo}, publisher = {Springer}, address = {Berlin, Heidelberg}, isbn = {978-3-662-55503-3}, doi = {10.1007/978-3-662-55504-0_1}, pages = {3 -- 22}, abstract = {Human beings have relied on stored energy since time immemorial. The planet's first mechanism for storing energy arose two billion years ago. Photosynthesis captures solar energy in chemical bonds; it is a process on which all life depends. With the discovery of fire around one-and-a-half million years ago, early man learned to access this stored energy by burning wood. Only since the Industrial Revolution have humans used fossil fuels, which are the results of biomass produced millions of years ago, then subjected to geological processes. Today, the long-term objective is to utilize sustainable biomass storage, replicate it by technical means, and to develop new storage technologies. This chapter is about the history of energy storage as it pertains to the carbon cycle. It begins with a natural energy storage system—photosynthesis—and examines its products biomass, peat, and fossil fuels before turning to storage technology in the era of renewable energies. It will also discuss how stored energy is used. This chapter focuses on natural biogenic and fossil energy storage. Other chapters are devoted to artificial storage technologies, including batteries, pumped-storage, and power-to-gas (PtG). Each begins with a short history of its respective technology.}, language = {en} } @incollection{SternerStadlerEckertetal., author = {Sterner, Michael and Stadler, Ingo and Eckert, Fabian and Gerhardt, Norman and von Olshausen, Christian and Thema, Martin and Trost, Tobias}, title = {Storage Integration for Coupling Different Energy Sectors}, series = {Handbook of Energy Storage}, booktitle = {Handbook of Energy Storage}, editor = {Sterner, Michael and Stadler, Ingo}, publisher = {Springer}, address = {Berlin, Heidelberg}, isbn = {978-3-662-55503-3}, doi = {10.1007/978-3-662-55504-0_14}, pages = {757 -- 803}, abstract = {Electricity is becoming the primary source of energy, a trend that is particularly apparent through the coupling of the electricity sector with other energy sectors. In addition to the established links between the electricity and heating sectors using combined heat and power (CHP), which is supplemented by electric heat-pumps and power-to-heat (PtH), other new links are also emerging. These links are manifesting in the form of electro-mobility and electric fuels in the electricity and transport sectors; and in the electricity and gas sector they are appearing in the form of power-to-gas (PtG). The production of basic chemical materials such as methanol or polymers using electrical energy, water, and CO2 will also play a role in the future. However, the latter will not be dealt with explicitly here. Instead we will consider in detail other aspects of electricity as a primary energy source and its integration and application for energy storage.}, language = {en} } @incollection{SternerStadlerEckertetal., author = {Sterner, Michael and Stadler, Ingo and Eckert, Fabian and Thema, Martin}, title = {Storage Integration in Individual Energy Sectors}, series = {Handbook of Energy Storage}, booktitle = {Handbook of Energy Storage}, editor = {Sterner, Michael and Stadler, Ingo}, publisher = {Springer}, address = {Berlin, Heidelberg}, isbn = {978-3-662-55503-3}, doi = {10.1007/978-3-662-55504-0_13}, pages = {675 -- 755}, abstract = {How is energy storage integrated and currently implemented in the electricity supply, heating supply, and mobility sectors? This chapter provides both theoretical and practical answers to that question. The chapter focuses on the integration of renewable energy. Cross-sectoral energy storage systems that link the electricity, heating, and mobility sectors are discussed in Kap. 14. This chapter focuses on storage integration in the electricity sector. After considering stand-alone networks, the chapter uses practical examples to analyze the various storage applications in the European network. The chapter concludes with a discussion of storage integration in the heating and transportation sectors.}, language = {en} } @incollection{SternerBauer, author = {Sterner, Michael and Bauer, Franz}, title = {Definition and Classification of Energy Storage Systems}, series = {Handbook of Energy Storage}, booktitle = {Handbook of Energy Storage}, editor = {Sterner, Michael and Stadler, Ingo}, publisher = {Springer}, address = {Berlin, Heidelberg}, isbn = {978-3-662-55503-3}, doi = {10.1007/978-3-662-55504-0_2}, pages = {23 -- 47}, abstract = {Energy supply always requires energy storage—either as an intrinsic property or as additional system. It is an intrinsic property of solid, liquid, and gaseous fuels, although less so of water-borne heat, but not of electricity. So to meet variable demands and supplies, heat and electricity networks usually require additional storage systems. When they are added to an energy network, should they be viewed as 'suppliers' or as 'consumers'? Who is responsible for covering the costs of storage systems? To categorize storage systems in the energy sector, they first need to be carefully defined. This chapter defines storage as well as storage systems, describes their use, and then classifies storage systems according to temporal, spatial, physical, energy-related, and economic criteria.}, language = {de} } @incollection{StadlerSterner, author = {Stadler, Ingo and Sterner, Michael}, title = {Urban Energy Storage and Sector Coupling}, series = {Urban Energy Transition}, booktitle = {Urban Energy Transition}, editor = {Droege, Peter}, edition = {2. ed.}, publisher = {Elsevier}, isbn = {978-0-08-102074-6}, doi = {10.1016/B978-0-08-102074-6.00026-7}, pages = {225 -- 244}, abstract = {Global warming, greenhouse gas emissions, and the general transition toward renewable energy resources are mentioned many times within this book, and will not be repeated again here. Countries that are transitioning to use of more renewable energy sources are mainly using wind and solar power—except for a few countries that, due to their prerequisites, will mainly use hydro power and/or bioenergy. The transmission process in terms of energy generation so far is mainly happening in rural areas—not in urban centers. Most technologies do not really play an important role in urban areas, and are mainly focused on the application of solar energy. Solar energy is widely applied more in rural areas, although investigations show that its application in urban areas already fits well into the existing grid infrastructure. Whereas rural areas are more prone to grid integration problems, the energy infrastructure in urban centers is already well prepared for renewables integration. In fostering tight bundles of potentially linked energy generation, distribution, networking, and use across power and thermal systems in stationary and mobile modes, urban centers become particularly critical in the energy transition processes as energy systems are becoming completely based on renewable sources without a nuclear or fossil-based backbone. This chapter discusses the almost unlimited energy storage possibilities. It will show their enormous capabilities, but also their significant differences in many physical and economical parameters. Next, the authors discuss the necessity of combining and coupling the different energy sectors for electricity, heat, cold, gas, and transport. Finally, the authors present the conclusion that only when coupling the energy sectors and using cheap and efficient energy storage options from one energy sector to solve challenges within another energy sector will the energy transition process be managed in an efficient way.}, language = {en} } @unpublished{KaulBoellmannThemaetal., author = {Kaul, Anja and B{\"o}llmann, Andrea and Thema, Martin and Kalb, Larissa and St{\"o}ckl, Richard and Huber, Harald and Sterner, Michael and Bellack, Annett}, title = {Identification of Robust Thermophilic Methanogenic Archaea and Packing Material for High Liquid Hold-Up at Low Volumetric Gas Flow Rates for Use in Trickle-Bed Reactors for Biological Methanation}, series = {SSRN Electronic Journal}, journal = {SSRN Electronic Journal}, doi = {10.2139/ssrn.3940878}, abstract = {he hydrogen gas-to-liquid mass transfer is the limiting factor in biological methanation. In a trickle-bed reactor, mass transfer can be increased by high flow velocities in the liquid phase, by adding a packing material with high liquid hold-up, or by choosing methanogenic archaea with a high methane productivity. This study analyzed various packings and methanogenic strains from a hydrodynamic and microbial perspective. By analyzing twelve pure cultures of thermophilic methanogens for their ability to produce high quality methane and to form biofilms on different packings, strains of Methanothermobacter were found to perform better than thus of the genus Methanothermococcus. Best methane production and adherence was observed on DuraTop®, Bioflow 9, and filter foam. DuraTop® and Bioflow 9 had also a high dynamic liquid hold-up, but the maximum hold-up was determined for expanded clay. The ideal combination for use in the ORBIT-trickle-bed reactor was identified as Methanothermobacter thermoautotrophicus IM5 and DuraTop®.}, language = {en} } @incollection{SternerBauerHofrichter, author = {Sterner, Michael and Bauer, Franz and Hofrichter, Andreas}, title = {Systemanalyse von Power-to-X-Pfaden - Ergebnisse des Satellitenprojektes "SPIKE"}, series = {Optionen f{\"u}r ein nachhaltiges Energiesystem mit Power-to-X Technologien : Nachhaltigkeitseffekte - Potenziale Entwicklungsm{\"o}glichkeiten; 2. Roadmap des Kopernikus-Projektes "Power-to-X": Flexible Nutzung erneuerbarer Ressourcen (P2X)}, booktitle = {Optionen f{\"u}r ein nachhaltiges Energiesystem mit Power-to-X Technologien : Nachhaltigkeitseffekte - Potenziale Entwicklungsm{\"o}glichkeiten; 2. Roadmap des Kopernikus-Projektes "Power-to-X": Flexible Nutzung erneuerbarer Ressourcen (P2X)}, editor = {Ausfelder, Florian and Dura, Hanna Ewy}, publisher = {DECHEMA Gesellschaft f{\"u}r Chemische Technik und Biotechnologie e.V}, address = {Frankfurt am Main}, isbn = {978-3-89746-218-2}, pages = {145 -- 153}, language = {de} } @incollection{SternerBauerCrotoginoetal., author = {Sterner, Michael and Bauer, Franz and Crotogino, Fritz and Eckert, Fabian and von Olshausen, Christian and Teichmann, Daniel and Thema, Martin}, title = {Chemical Energy Storage}, series = {Handbook of Energy Storage}, booktitle = {Handbook of Energy Storage}, editor = {Sterner, Michael and Stadler, Ingo}, publisher = {Springer}, address = {Berlin, Heidelberg}, isbn = {978-3-662-55503-3}, doi = {10.1007/978-3-662-55504-0_8}, pages = {325 -- 482}, abstract = {Purely electrical energy storage technologies are very efficient, however they are also very expensive and have the smallest capacities. Electrochemical-energy storage reaches higher capacities at smaller costs, but at the expense of efficiency. This pattern continues in a similar way for chemical-energy storage. In terms of capacities, the limits of batteries (accumulators) are reached when low-loss long-term storage is of need. Chemical-energy storage and stocking fulfills these requirements completely. The storing itself may be subject to significant efficiency losses, but, from today's point of view and in combination with the existing gas and fuel infrastructure, it is the only national option with regards to the long-term storage of renewable energies. Chemical-energy storage is the backbone of today's conventional energy supply. Solid (wood and coal), liquid (mineral oil), and gaseous (natural gas) energy carriers are 'energy storages' themselves, and are stored using different technologies. In the course of energy transition, chemical-energy storage will be of significant importance, mainly as long-term storage for the power sector, but also in the form of combustibles and fuels for transport and heat. Not only are conventional storing technologies discussed within this chapter, but a detailed explanation is also given about the storage of renewable energies in the form of gaseous (power-to-gas, PtG) and liquid (power-to-liquid, PtL) energy carriers for electricity, heat, chemicals, and in the form of synthetic fuels.}, language = {en} } @incollection{SternerEckertGerhardtetal., author = {Sterner, Michael and Eckert, Fabian and Gerhardt, Norman and Henning, Hans-Martin and Palzer, Andreas}, title = {Heating Supply Storage Requirements}, series = {Handbook of Energy Storage}, booktitle = {Handbook of Energy Storage}, editor = {Sterner, Michael and Stadler, Ingo}, publisher = {Springer}, address = {Berlin, Heidelberg}, isbn = {978-3-662-55503-3}, doi = {10.1007/978-3-662-55504-0_4}, pages = {137 -- 163}, abstract = {Unlike the electricity sector, heating and cooling storage requirements have attracted little public attention. This is because these storage requirements have generally already been met, and will not change significantly in the future. In the electricity sector by contrast, there will be a significant shift from primary energy storage to electricity and final energy storage. Both sectors have remarkably high storage requirements. Almost all households have thermal buffers. The same is true of renewable energy heating systems such as pellet heating, geothermal, or solar-thermal systems. Some households with liquid gas or oil heating even have two storage units: a fuel tank and a thermal buffer. Exceptions include heating systems with upstream storage such as district heating or gas storage. In the future, integration of the electricity and heating sectors by combined heat and power (CHP) generation, heat pumps, power-to-heat (PtH), and power-to-gas (PtG) will facilitate the use of renewable energy, and lead to a paradigm shift. Relying on results from various studies, this chapter examines the development of heating supply in Germany and the resulting thermal storage requirements. The chapter's later sections provide surplus and storage potential estimates. Cooling requirements are included as 'process cooling' under 'process heat', and as 'air-conditioning' over 'room heating'. It is primarily integrated into electricity demand.}, language = {en} } @article{EstermannNewboroughSterner, author = {Estermann, Thomas and Newborough, Marcus N. and Sterner, Michael}, title = {Power-to-gas systems for absorbing excess solar power in electricity distribution networks}, series = {International Journal of Hydrogen Energy}, volume = {41}, journal = {International Journal of Hydrogen Energy}, number = {32}, publisher = {Elsevier}, doi = {10.1016/j.ijhydene.2016.05.278}, pages = {13950 -- 13959}, abstract = {The feasibility of implementing power-to-gas systems, to absorb surplus solar power from electricity distribution networks and carbon dioxide from biomass anaerobic digestion (AD) plant, in order to produce synthetic methane was investigated for a region of Southern Germany that has a high solar power penetration. The analysis was based on time series electricity data for 2012 from which future load profiles were computed in accordance with the expected installed capacities of solar power across the period 2015-2025. The electrolyser capacity required to absorb 20\% of excess solar energy occurring within the region's low voltage network in 2025 was estimated to be 370 MWe. First order considerations of the region's gas grid, electricity network and existing AD sites suggest that such a deployment could be achieved by installing sub-MW (and some multi-MW) power-to-gas plant at several hundred AD sites.}, language = {en} } @article{ThemaSternerLencketal., author = {Thema, Martin and Sterner, Michael and Lenck, Thorsten and G{\"o}tz, Philipp}, title = {Necessity and Impact of Power-to-gas on Energy Transition in Germany}, series = {Energy Procedia}, volume = {99}, journal = {Energy Procedia}, publisher = {Elsevier}, doi = {10.1016/j.egypro.2016.10.129}, pages = {392 -- 400}, abstract = {The present paper gives an outlook on a bandwidth of required installed power-to-gas capacity in the German power sector fed by 100\% renewable generation until 2050. Two scenarios were simulated to quantify cost effects of power-to-gas on the electricity system: once with, once without additional short-term flexibility options to a system using fossil natural gas as sole flexibility option instead. As a result, at latest in 2035, power-to-gas capacity expansion has to take place to reach required installed capacities of up to 89-134 GW in 2050. Application of power-to-gas as long-term flexibility leads to cost savings of up to 11,7-19 bn Euro enabling a fully renewable system in 2050.}, language = {en} } @misc{ThemaBellackWeidlichetal., author = {Thema, Martin and Bellack, Annett and Weidlich, Tobias and Huber, Harald and Karl, J{\"u}rgen and Sterner, Michael}, title = {Optimierung biologischer CO2-Methanisierung im Rieselbett-Reaktor}, series = {4. Regensburger Energiekongress, Regensburg 26.-27.02.2019}, journal = {4. Regensburger Energiekongress, Regensburg 26.-27.02.2019}, language = {de} } @misc{ThemaBauerSterner, author = {Thema, Martin and Bauer, Franz and Sterner, Michael}, title = {Power-to-Gas world status report}, series = {International Renewable Energy Storage Conference, D{\"u}sseldorf 14.-16.03.2019}, journal = {International Renewable Energy Storage Conference, D{\"u}sseldorf 14.-16.03.2019}, language = {de} } @misc{Sterner, author = {Sterner, Michael}, title = {Sektorenkopplung mit Solarstrom: Theorie und Praxis}, series = {17. Nationale Photovoltaik-Tagung, Kursaal Bern, Schweiz 26.03.2019}, journal = {17. Nationale Photovoltaik-Tagung, Kursaal Bern, Schweiz 26.03.2019}, language = {de} } @misc{Sterner, author = {Sterner, Michael}, title = {Ohne Speicher, Wasserstoff und Power-to-X keine Dekarbonisierung von Verkehr und Industrie - M{\"o}glichkeiten und Notwendigkeit der integrierten Sektorenkopplung}, series = {CIGRE/CIRED Informationsveranstaltung 2020, Leipzig, 13.10.2020}, journal = {CIGRE/CIRED Informationsveranstaltung 2020, Leipzig, 13.10.2020}, language = {de} } @misc{Sterner, author = {Sterner, Michael}, title = {Power-to-Gas technologies in the energy sector and their role in the fight against climate change}, series = {Hungarian Power-to-Gas REKK Forum, Budapest Corvinus University, 12.02.2020}, journal = {Hungarian Power-to-Gas REKK Forum, Budapest Corvinus University, 12.02.2020}, language = {en} } @misc{Sterner, author = {Sterner, Michael}, title = {Die Rolle von Wasserstoff in allen Sektoren}, series = {Sektoren{\"u}bergreifende Erkenntnisse zu PtX Fachforum "Wasserstoff Technologie, Prozesssicherheit und Regionalentwicklung", Kurt-Schwabe-Institut f{\"u}r Mess- und Sensortechnik Meinsberg e.V.) Meinsberg, 23.9.2020}, journal = {Sektoren{\"u}bergreifende Erkenntnisse zu PtX Fachforum "Wasserstoff Technologie, Prozesssicherheit und Regionalentwicklung", Kurt-Schwabe-Institut f{\"u}r Mess- und Sensortechnik Meinsberg e.V.) Meinsberg, 23.9.2020}, language = {de} } @misc{Sterner, author = {Sterner, Michael}, title = {Power-to-X im Kontext der Energiewende und des Klimaschutzes in Deutschland}, series = {Hydrogen Dialogue H2.Bayern, 18.11.2020, N{\"u}rnberg Friedrich-Alexander-Universit{\"a}t}, journal = {Hydrogen Dialogue H2.Bayern, 18.11.2020, N{\"u}rnberg Friedrich-Alexander-Universit{\"a}t}, language = {de} } @misc{Sterner, author = {Sterner, Michael}, title = {Bedeutung des Klimaschutzes f{\"u}r die Wirtschaft in Ostbayern}, series = {Veranstaltungsreihe der Freunde der OTH Regensburg e. V., Regensburg, Regensburg 25.11.2020}, journal = {Veranstaltungsreihe der Freunde der OTH Regensburg e. V., Regensburg, Regensburg 25.11.2020}, language = {de} } @misc{SternerSchumm, author = {Sterner, Michael and Schumm, Leon}, title = {Netzpuffer - Speicher \& Kraftwerke als virtuelle Leitungen f{\"u}r mehr Versorgungssicherheit und EE-Integration in Nord und S{\"u}d}, series = {7. Smart-Grid-Fachtagung WAGO, Hannover, 29. Sept. 2021}, journal = {7. Smart-Grid-Fachtagung WAGO, Hannover, 29. Sept. 2021}, language = {de} } @misc{Sterner, author = {Sterner, Michael}, title = {Vom Klimaschutz zum Wasserstoff in Verkehr und Industrie - jetzt regional handeln}, series = {Kick-Off Workshop: HyExpert Wasserstoffmodellregion Fichtelgebirge, Wunsiedel, 22.09.2020}, journal = {Kick-Off Workshop: HyExpert Wasserstoffmodellregion Fichtelgebirge, Wunsiedel, 22.09.2020}, language = {de} } @misc{Sterner, author = {Sterner, Michael}, title = {Wasserstoff als zentraler Baustein der Energiewende in S{\"u}ddeutschland: Powerto- Gas und der rechtliche Rahmen}, series = {1. Wasserstofftag S{\"u}ddeutschland, Um 29.10.2020}, journal = {1. Wasserstofftag S{\"u}ddeutschland, Um 29.10.2020}, language = {de} } @misc{Sterner, author = {Sterner, Michael}, title = {Warum wir Power-to-X f{\"u}r die Klimaneutralit{\"a}t und Mobilit{\"a}tswende brauchen}, series = {DECHEMA Fachforum Diesel: Mobilit{\"a}tswende durch alternative Antriebe und Kraftstoffe:, Frankfurt 02.12.2020}, journal = {DECHEMA Fachforum Diesel: Mobilit{\"a}tswende durch alternative Antriebe und Kraftstoffe:, Frankfurt 02.12.2020}, language = {de} } @misc{Sterner, author = {Sterner, Michael}, title = {Gr{\"u}ner Wasserstoff - wo wir ihn brauchen f{\"u}r die Klimaneutralit{\"a}t}, series = {Energiewendeforum Wasserstoff (Gr{\"u}ner Strom Label e. V.), Bonn, 21. September 2021}, journal = {Energiewendeforum Wasserstoff (Gr{\"u}ner Strom Label e. V.), Bonn, 21. September 2021}, language = {de} } @misc{Sterner, author = {Sterner, Michael}, title = {Wasserstoff - Energietr{\"a}ger der Zukunft}, series = {BBA Forum, Passau 24.11.2020}, journal = {BBA Forum, Passau 24.11.2020}, language = {de} } @incollection{Sterner, author = {Sterner, Michael}, title = {Power-to-Gas}, series = {Handbook of Climate Change Mitigation and Adaptation}, volume = {36}, booktitle = {Handbook of Climate Change Mitigation and Adaptation}, editor = {Chen, Wei-Yin and Suzuki, Toshio and Lackner, Maximilian}, publisher = {Springer}, address = {New York, NY}, isbn = {978-1-4614-6431-0}, doi = {10.1007/978-1-4614-6431-0_89-1}, pages = {1 -- 51}, abstract = {This chapter provides an overview on the storage technology power-to-gas for the decarbonization of all energy sectors. Other than "negative emissions" with CCS or biomass, which have clear limits in potentials, costs and environmental benefits, storage and energy conversion technologies like power-to-gas and power-to-x enable the decarbonization by neutralizing the CO2 footprint of all energy services. Via the conversion of renewable electricity into chemical energy carriers like renewable hydrogen or renewable hydrocarbons, the existing fossil infrastructure with vast and sufficient storage and transport capacities can be used with carbon neutral renewable energy. After showing the demand for storage technologies, the technology components of power-to-gas are described, building the basis for the storage system power-to-gas itself that is described in detail, including efficiency, potential, CO2 emissions, and costs. In conclusion, a technical pathway of decarbonization including costs is described for the industrial nation of Germany and necessary policy frameworks are derived.}, language = {en} }