@misc{AppelhansKampmannMottoketal., author = {Appelhans, Marie-Luise and Kampmann, Matthias and Mottok, J{\"u}rgen and Riederer, Michael and Nagl, Klaus and Steffens, Oliver and D{\"u}nnweber, Jan and Wildgruber, Markus and Roth, Julius and Stadler, Timo and Palm, Christoph and Weiß, Martin Georg and Rochholz, Sandra and Bierl, Rudolf and Gschossmann, Andreas and Haug, Sonja and Schmidbauer, Simon and Koch, Anna and Westner, Markus and Bary, Benedikt von and Ellermeier, Andreas and V{\"o}gele, Daniel and Maiwald, Frederik and Hierl, Stefan and Schlamp, Matthias and Ehrlich, Ingo and Siegl, Marco and H{\"u}ntelmann, Sven and Wildfeuer, Matthias and Br{\"u}ckl, Oliver and Sterner, Michael and Hofrichter, Andreas and Eckert, Fabian and Bauer, Franz and Dawoud, Belal and Rabl, Hans-Peter and Gamisch, Bernd and Schmidt, Ottfried and Heberl, Michael and Thema, Martin and Mayer, Ulrike and Eller, Johannes and Sippenauer, Thomas and Adelt, Christian and Haslbeck, Matthias and Vogl, Bettina and Mauerer, Wolfgang and Ramsauer, Ralf and Lohmann, Daniel and Sax, Irmengard and Gabor, Thomas and Feld, Sebastian and Linnhoff-Popien, Claudia and Ławrowski, Robert Damian and Langer, Christoph and Schreiner, Rupert and Sellmair, Josef}, title = {Forschung 2019}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-9818209-7-3}, doi = {10.35096/othr/pub-789}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-7890}, pages = {72}, abstract = {Bericht mit Forschungsprojekten aus verschiedenen Bereichen der OTH Regensburg mit dem Schwerpunktthema "K{\"u}nstliche Intelligenz" und einem Gespr{\"a}ch zur "Medizin der Zukunft"}, subject = {Forschung}, language = {de} } @misc{BroserFalterŁawrowskietal., author = {Broser, Christian and Falter, Thomas and Ławrowski, Robert Damian and Altenbuchner, Amelie and V{\"o}gele, Daniel and Koss, Claus and Schlamp, Matthias and Dunnweber, Jan and Steffens, Oliver and Heckner, Markus and Jaritz, Sabine and Schiegl, Thomas and Corsten, Sabine and Lauer, Norina and Guertler, Katherine and Koenig, Eric and Haug, Sonja and Huber, Dominik and Birkenmaier, Clemens and Krenkel, Lars and Wagner, Thomas and Justus, Xenia and Saßmannshausen, Sean Patrick and Kleine, Nadine and Weber, Karsten and Braun, Carina N. and Giacoppo, Giuliano and Heinrich, Michael and Just, Tobias and Schreck, Thomas and Schnabl, Andreas and Gilmore, Amador T{\´e}ran and Roeslin, Samuel and Schmid, Sandra and Wellnitz, Felix and Malz, Sebastian and Maurial, Andreas and Hauser, Florian and Mottok, J{\"u}rgen and Klettke, Meike and Scherzinger, Stefanie and St{\"o}rl, Uta and Heckner, Markus and Bazo, Alexander and Wolff, Christian and Kopper, Andreas and Westner, Markus and Pongratz, Christian and Ehrlich, Ingo and Briem, Ulrich and Hederer, Sebastian and Wagner, Marcus and Schillinger, Moritz and G{\"o}rlach, Julien and Hierl, Stefan and Siegl, Marco and Langer, Christoph and Hausladen, Matthias and Schreiner, Rupert and Haslbeck, Matthias and Kreuzer, Reinhard and Br{\"u}ckl, Oliver and Dawoud, Belal and Rabl, Hans-Peter and Gamisch, Bernd and Schmidt, Ottfried and Heberl, Michael and G{\"a}nsbauer, Bianca and Bick, Werner and Ellermeier, Andreas and Monkman, Gareth J. and Prem, Nina and Sindersberger, Dirk and Tschurtschenthaler, Karl and Aurbach, Maximilian and Dendorfer, Sebastian and Betz, Michael A. and Szecsey, Tamara and Mauerer, Wolfgang and Murr, Florian}, title = {Forschung 2018}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-9818209-5-9}, doi = {10.35096/othr/pub-1382}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-13826}, pages = {98}, subject = {Forschung}, language = {de} } @misc{SternerHeberl, author = {Sterner, Michael and Heberl, Michael}, title = {The ORBIT-Project: Biological methanation in a trickle-bed reactor - key results and next steps}, series = {5th Nuremberg Workshop on Methanation and 2nd Generation, N{\"u}rnberg Friedrich-Alexander-Universit{\"a}t, 28.05.2021}, journal = {5th Nuremberg Workshop on Methanation and 2nd Generation, N{\"u}rnberg Friedrich-Alexander-Universit{\"a}t, 28.05.2021}, organization = {Friedrich-Alexander-Universit{\"a}t Erlangen-N{\"u}rnberg / Lehrstuhl f{\"u}r Energieverfahrenstechnik}, language = {en} } @techreport{ThemaKaulSterneretal., author = {Thema, Martin and Kaul, Anja and Sterner, Michael and Heberl, Michael}, title = {Optimierung eines Rieselbett-Bioreaktors f{\"u}r die dynamische mikrobielle Biosynthese von Methan mit Archaeen-Mikroorganismen in Power-to-Gas-Anlagen}, doi = {10.2314/KXP:1815321555}, abstract = {Das {\"u}bergeordnete Ziel des Vorhabens war die Entwicklung neuer technologischer M{\"o}glichkeiten f{\"u}r den biologischen Methanisierungsprozess mit Archaeen1 in Power-to-Gas-Anwendungen. Im Gegensatz zur technisch ausgereiften chemisch-katalytischen Methanisierung sind hier noch Potenziale zur Optimierung verfahrenstechnischer und biologischer Prozesse f{\"u}r das Speicherkonzept Power-to-Gas [7] vorhanden. Dabei sollte zum einen ein Rieselbett-Bioreaktor optimiert, simuliert und f{\"u}r die Hochskalierung vorbereitet werden. Zum anderen sollte eine Kombination optimal geeigneter Mikroorganismen und Packungsmaterialien selektiert und deren Verhalten und Eignung im Reaktor analysiert werden. Das Verhalten des entwickelten Systems sollte zun{\"a}chst im Labor- und Technikumsmaßstab und anschließend im Feldtest an einer bestehenden Power-to-Gas-Anlage untersucht werden. Hauptziel w{\"a}hrend des Feldtests war die Produktion von einspeisef{\"a}higem Methan sowie dessen Einspeisung ins Gasnetz. Ein Hauptziel des Projektes war es, die Normung und Standardisierung notwendiger Systemparameter und Semantik zur Beschreibung und Einbindung biologischer Methanisierungseinheiten in Power-to-Gas-Anlagen voranzutreiben. Dies sollte zum einen die Vergleichbarkeit der wissenschaftlichen Erkenntnisse verbessern und zum anderen unterst{\"u}tzend bei der Kommerzialisierung der Technologie wirken. Aus dem Projekt heraus wurde so die neue Normungsreihe VDI 4635 Power-to-X beim Verein Deutscher Ingenieure angestoßen.}, language = {de} } @article{HeberlWithelmKauletal., author = {Heberl, Michael and Withelm, Christian and Kaul, Anja and Rank, Daniel and Sterner, Michael}, title = {Prospective Life Cycle Assessment of Biological Methanation in a Trickle-Bed Pilot Plant and a Potential Scale-Up}, series = {Energies}, volume = {17}, journal = {Energies}, number = {9}, publisher = {MDPI AG}, address = {Basel}, issn = {1996-1073}, doi = {https://doi.org/10.3390/en17092206}, abstract = {The fluctuating nature of renewable energies results in the need for sustainable storage technologies to defossilize the energy system without other negative consequences for humans and the environment. In this study, a pilot-scale trickle-bed reactor for biological methanation and various scale-up scenarios for 2024 and 2050 were investigated using life cycle assessment. A best- and worst-case scenario for technology development until 2050 was evolved using cross-consistency analysis and a morphological field, based on which the data for the ecological models were determined. The results show that the plant scale-up has a very positive effect on the ecological consequences of methanation. In the best-case scenario, the values are a factor of 23-780 lower than those of the actual plant today. A hot-spot analysis showed that electrolysis operation has an especially large impact on total emissions. The final Monte Carlo simulation shows that the technology is likely to achieve a low global warming potential with a median of 104.0 kg CO2-eq/MWh CH4 and thus can contribute to decarbonization.}, language = {en} } @techreport{SternerBauerHofrichteretal., author = {Sterner, Michael and Bauer, Franz and Hofrichter, Andreas and Heberl, Michael}, title = {Systemanalyse und -integration Power-to-X im Kontext von erneuerbarer Elektrizit{\"a}t als Prim{\"a}renergie (SPIKE)}, pages = {87}, abstract = {Durch das in Paris beschlossene Ziel, die globale mittlere Temperatur auf deutlich unter 2 Grad Celsius gegen{\"u}ber dem vorindustriellen Niveau zu begrenzen, ist ein Ausstieg aus der Nutzung fossiler Energietr{\"a}ger und Rohstoffe bis zum Jahr 2050 notwendig (WBGU 2016). Daher hat sich die Bundesregierung das Ziel gesetzt, bis zur Mitte des Jahrhunderts eine weitgehende Treibhausgasneutralit{\"a}t zu erreichen. Hierzu ist neben einer Steigerung der Energieeffizienz in allen Sektoren ein Ausbau erneuerbaren Energien notwendig. Dies beinhaltet haupts{\"a}chlich den Zubau von Wind- und Solarstromanlagen. Somit gewinnt die Sektorkopplung immer mehr an Bedeutung und wird in Zukunft eine tragende Rolle f{\"u}r die Defossilisierung des Energiesystems spielen (BMUB 2016). Als zentrales Element der Sektorkopplung gilt Strom, der {\"u}ber Power-to-X (PtX) sowohl energetisch im W{\"a}rme-, und Verkehrssektor als auch stofflich in der Industrie und vor allem im Chemiesektor eingesetzt werden kann (Ausfelder et al. 2018a). Im Rahmen des P2X-Vorhabens der Kopernikus Forschungsinitiative wird die Sektorkopplung durch die Umwandlung von Strom mittels elektrochemischer Prozesse in stoffliche Ressourcen wie Wasserstoff, Synthesegas oder Kohlenstoffmonoxid untersucht. Der Schwerpunkt liegt auf der Betrachtung der Kopplung von Strom und Verkehr sowie Strom und Chemie und der Untersuchung von Prozessen und Pfaden, die aus {\"o}kologischer, {\"o}konomischer und gesellschaftlicher Sicht vorteilhaft sind. Eine vergleichende Einordnung in den Gesamtkontext der Energiewende mit Abw{\"a}gung zahlreicher Alternativen und Konkurrenztechnologien ist dort allerdings nicht vorgesehen. Zudem werden einige relevante PtX-Technologien wie Power-to-Heat nicht betrachtet. Aus diesem Grund wurden in SPIKE erg{\"a}nzende PtX-Technologiepfade aus systemanalytischer Sicht untersucht. Dies sind Power-to-Heat (PtH) und Power-to-Gas (PtG) {\"u}ber Elektrolyse und optionaler anschließender Methanisierung sowie die Herstellung ausgew{\"a}hlter Pfade der strombasierten Herstellung von Produkten der energieintensiven Industrie. Ziel des Forschungsvorhabens war die Analyse von PtX-Technologien und Pfaden, deren vergleichende Einordnung im Gesamtkontext der Energiewende sowie die Unterst{\"u}tzung des P2X Roadmapping Prozesses und die Ableitung von Handlungsempfehlungen. Ein besonderer Schwerpunkt lag auf dem Einsatz von PtX im Industriesektor. F{\"u}r das Vorhaben wurden Arbeitspakete (AP) erstellt, die Untersuchungen zu Technologie, Potenzial, {\"O}konomie und {\"O}kologie von PtH (AP 1), PtG (AP 2), Power-to-Ammoniak, Power-to-Ethen und Power-to-Propen (AP 3) umfassten. Daraus wurde in AP 4 ein Systemvergleich mit Einordnung von PtX in die Energiewende durchgef{\"u}hrt. Auf dieser Basis und der Identifizierung regulatorischer Rahmenbedingungen f{\"u}r PtX (AP 5) wurde das deutsche Energiesystem samt PtX-Pfaden in einem Energiesystemmodell abgebildet (AP 6). Die Ergebnisse flossen in das Roadmapping ein (AP 7). Zudem erfolgte ein Austausch mit den Projektpartnern und das Verfassen wissenschaftlicher Abhandlungen (AP 8).}, language = {de} } @article{GaertnerRankHeberletal., author = {G{\"a}rtner, Sebastian and Rank, Daniel and Heberl, Michael and Gaderer, Matthias and Dawoud, Belal and Haumer, Anton and Sterner, Michael}, title = {Simulation and Techno-Economic Analysis of a Power-to-Hydrogen Process for Oxyfuel Glass Melting}, series = {Energies}, volume = {14}, journal = {Energies}, number = {24}, publisher = {MDPI}, doi = {10.3390/en14248603}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-22713}, abstract = {As an energy-intensive industry sector, the glass industry is strongly affected by the increasingly stringent climate protection targets. As established combustion-based production systems ensure high process stability and glass quality, an immediate switch to low greenhouse gas emission processes is difficult. To approach these challenges, this work investigates a step-by-step integration of a Power-to-Hydrogen concept into established oxyfuel glass melting processes using a simulation approach. This is complemented by a case study for economic analysis on a selected German glass industry site by simulating the power production of a nearby renewable energy park and subsequent optimization of the power-to-hydrogen plant performance and capacities. The results of this study indicate, that the proposed system can reduce specific carbon dioxide emissions by up to 60\%, while increasing specific energy demand by a maximum of 25\%. Investigations of the impact of altered combustion and furnace properties like adiabatic flame temperature (+25 °C), temperature efficiency (∆ξ = -0.003) and heat capacity flow ratio (∆zHL = -0.009) indicate that pure hydrogen-oxygen combustion has less impact on melting properties than assumed so far. Within the case study, high CO2 abatement costs of 295 €/t CO2-eq. were determined. This is mainly due to the insufficient performance of renewable energy sources. The correlations between process scaling and economic parameters presented in this study show promising potential for further economic optimization of the proposed energy system in the future.}, language = {en} } @techreport{RankHeberlSterner, author = {Rank, Daniel and Heberl, Michael and Sterner, Michael}, title = {Die CO2-Bilanz der OTH [Ostbayerischen Technische Hochschule Regenburg]}, language = {de} } @article{HofrichterRankHeberletal., author = {Hofrichter, Andreas and Rank, Daniel and Heberl, Michael and Sterner, Michael}, title = {Determination of the optimal power ratio between electrolysis and renewable energy to investigate the effects on the hydrogen production costs}, series = {International Journal of Hydrogen Energy}, volume = {48}, journal = {International Journal of Hydrogen Energy}, number = {5}, publisher = {Elsevier}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2022.09.263}, pages = {1651 -- 1663}, abstract = {Green hydrogen via renewable powered electrolysis has a high relevance in decarbonization and supply security. Achieving economically competitive hydrogen production costs is a major challenge in times of an energy price crisis. Our objective is to show the economically optimal installed capacity of electrolysers in relation to wind and solar power so swift and credible statements can be made regarding the system design. The ratio between renewable generation and electrolysis power as well as scaling effects, operating behaviour and development of costs are considered. Hydrogen production costs are calculated for four exemplary real PV and wind sites and different ratios of electrolysis to renewable power for the year 2020. The ideal ratio for PV systems is between 14\% and 73\% and for wind between 3.3\% and 143\% for low and high full load hours. The lowest hydrogen production costs are identified at 2.53 €/kg for 50 MW wind power and 72 MW electrolysis power. The results provide plant constructors the possibility to create a cost-optimized design via an optimum ratio of electrolysis to renewable capacity. Therefore, the procedures for planning and dimensioning of selected systems can be drastically simplified.}, language = {en} } @inproceedings{GaertnerRankHeberletal., author = {G{\"a}rtner, Sebastian and Rank, Daniel and Heberl, Michael and Gaderer, Matthias and Sterner, Michael}, title = {Integration of Power-To-Methane into Glass Melting Processes}, series = {Proceedings of the International Renewable Energy Storage Conference (IRES 2022)}, volume = {16}, booktitle = {Proceedings of the International Renewable Energy Storage Conference (IRES 2022)}, publisher = {Atlantis Press}, issn = {2589-4943}, doi = {10.2991/978-94-6463-156-2_12}, pages = {147 -- 161}, abstract = {The glass industry is facing increased challenges regarding climate protection targets and rising energy costs. The integration of renewable energy including conversion and storage is a key for both challenges in this energy-intensive industrial sector, which has been mainly relying on fossil gas so far. The options considered to this point for reducing CO2 emissions and switching to a renewable energy supply involve far-reaching changes of the established melting processes. This entails significant risks in terms of influences on glass quality and stable production volumes. The presented approach for the integration of a Power-to-Methane (PtM) system into the glass industry is a completely new concept and has not been considered in detail before. It allows the use of established oxyfuel melting processes, the integration of fluctuating renewable energy sources and a simultaneous reduction of CO2 emissions by more than 78\%. At the same time, natural gas purchases become obsolete. A techno-economic evaluation of the complete PtM process shows, that 1,76 €/m3 or 1,26 €/kg synthetic natural gas are possible with renewable energy supply. Using electricity from the energy grid would require electricity prices < 0,126 €/kWh to allow cost competitive PtM processes in the glass industry. Such electricity prices could be achieved by electricity market-based optimization and operation of the PtM system. This operation strategy would require AI-based algorithms predicting availabilities and prices on future-based markets.}, language = {en} } @unpublished{HeberlWithelmKauletal., author = {Heberl, Michael and Withelm, Christian and Kaul, Anja and Rank, Daniel and Sterner, Michael}, title = {Prospective Life Cycle Assessment of Biological Methanation in a Trickle-Bed Pilot Plant and a Potential Scale-Up}, publisher = {SSRN}, doi = {10.2139/ssrn.4635066}, abstract = {In this study, a pilot-scale trickle-bed reactor for biological methanation and various scale-up scenarios for 2023 and 2050 were investigated using LCA. A best- and worst-case scenario for technology development until 2050 was evolved using cross consistency analysis and morphological field, based on which the data for the ecological models were determined.The results show that the plant scale-up has a very positive effect on the ecological consequences of methanation. In the best-case scenario, the values are a factor of 23-780 lower than those of the actual plant today. A hot-spot analysis showed that especially electrolysis operation has a large impact on total emissions. The final Monte-Carlo simulation shows that the technology is likely to achieve a low GWP with a median of 104.0 kg CO2-eq / MWh CH4.}, language = {en} } @article{HeberlHofrichterRanketal., author = {Heberl, Michael and Hofrichter, Andreas and Rank, Daniel and Bauer, Franz and Sterner, Michael}, title = {Influence of plant dimensioning and location on the ecology of PEM electrolysis}, series = {International Journal of Hydrogen Energy}, volume = {167}, journal = {International Journal of Hydrogen Energy}, publisher = {Elsevier}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2025.151039}, pages = {11}, abstract = {PV and wind systems with PEM electrolysis offer great potential for producing hydrogen with low emissions. Our research has identified the ecologically optimal size of PEM in relation to fixed PV/wind capacities. We calculate efficiencies and production volumes for PEM with 240 capacity and site variations. We analyse the global warming potential of all systems and draw conclusions about the optimal system design. The lowest GWP is achieved at the site with the highest full load hours with 1.32 kg CO2-eq/kg H2 (Wind, 28 MW electrolysis) and 4.24 kg CO2-eq/kg H2 (PV, 23 MW electrolysis). We have identified a clear trend: increasing PV/wind full load hours leads to higher ideal PEM capacities. However, there is a significant discrepancy between the ideal economic and ecological capacity. Furthermore, higher electrolysis capacities can achieve lower emissions as they increasingly operate at a more efficient partial load.}, language = {en} } @misc{Heberl, type = {Master Thesis}, author = {Heberl, Michael}, title = {Power-to-Ammoniak}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-22167}, school = {Ostbayerische Technische Hochschule Regensburg}, pages = {68}, abstract = {Ammoniak ist Grundbaustein f{\"u}r die Herstellung von D{\"u}ngemitteln und dementsprechend f{\"u}r die Nahrungsmittelindustrie unentbehrlich. Ca. 40-50 \% der Weltbev{\"o}lkerung sind von Nahrungsmitteln abh{\"a}ngig, die mit Hilfe von Ammoniakd{\"u}ngern hergestellten wurden. Weltweit wurden alleine im Jahr 2015 181 Mt Ammoniak produziert, wodurch die Ammoniakherstellung mit 1,2 \% am gesamten Energieverbrauch der Welt beteiligt ist und f{\"u}r 0,93 \% der globalen Treibhausgasemissionen zust{\"a}ndig ist. Auch in Zeiten der Energiewende ist diese Grundstoffchemikalie unentbehrlich, ist aber auf einem anderen Wege herzustellen. Ziel dieser Arbeit ist die Darstellung verschiedener M{\"o}glichkeiten zur erneuerbaren Elektrifizierung und Dekarbonisierung der Ammoniakindustrie, wodurch der Einsatz von herk{\"o}mmlichen Energietr{\"a}gern wie Erdgas, Kohle und {\"O}l negiert werden kann. Ammoniak wird aktuell {\"u}ber das Haber-Bosch-Verfahren aus den Rohstoffen Erdgas, Kohle und {\"O}l gewonnen. Bei diesem Verfahren wird {\"u}ber einen Prim{\"a}r- und Sekund{\"a}rreformer Wasserstoff und Stickstoff gewonnen. Andere Gasbestandteile werden gefiltert oder umgewandelt, um sch{\"a}dliche Katalysatorgifte (CO, H2S) zu entfernen. Im Reaktor wird an Eisenkatalysatoren aus Wasserstoff und Stickstoff letztendlich Ammoniak hergestellt. Der Energieverbrauch des Haber-Bosch Verfahrens schwankt zwischen 7,8 MWh/t NH3 f{\"u}r eine moderne und sehr effiziente Anlage mit Erdgas und 13,6 MWh/t NH3 f{\"u}r eine alte mit Kohle betriebene Anlage. An Emissionen treten pro hergestellter Tonne Ammoniak je nach Rohstoff 1,6-3,8 t CO2-eq auf. Neben der Biomassevergasung gibt es mehrere rein elektrische Ans{\"a}tze zur Ammoniakherstellung. Die unterschiedlichen elektrochemischen Ans{\"a}tze zur direkten Ammoniaksynthese, wie der Einsatz von Fl{\"u}ssigsalzelektrolyten oder Feststoffelektrolyten, wurden in Abschnitt 3.2 vorgestellt. Einige dieser Technologien zeigen vielversprechende Ans{\"a}tze, sind jedoch zum aktuellen Zeitpunkt noch zu weit von einem industriellen Einsatz entfernt. Der Einsatz der Wasserelektrolyse in Kombination mit einer Luftzerlegungseinheit ist die derzeit vielversprechendste Methode Ammoniak auf einem strombasierten und dekarbonisierten Wege herzustellen. Bei diesem System wird Wasserstoff im Elektrolyseur und Stickstoff in der Luftzerlegungseinheit hergestellt. Die Ammoniaksynthese findet hierbei in einem Reaktor nach Vorbild des Haber-Bosch-Prozesses statt. Mit diesem System ist ein Energieverbrauch von ca. 10 MWh/t NH3 notwendig. Durch den Einsatz von rein erneuerbar hergestelltem Strom als Energietr{\"a}ger l{\"a}sst sich mit diesem Technologiezusammenschluss die Ammoniakherstellung komplett Emissionsfrei gestalten. Dadurch k{\"o}nnen alleine in Deutschland j{\"a}hrlich bis zu 7,8 Mt CO2-eq eingespart werden. Eine zuk{\"u}nftige Umstrukturierung der Ammoniakherstellung und der gesamten chemischen Industrie ist unabdingbar. Diese kann aber nur parallel mit einem Ausbau erneuerbarer Energien umgesetzt werden. Mit der Wasserelektrolyse und der Luftzerlegungseinheit sind die technischen M{\"o}glichkeiten f{\"u}r diesen Umbau bereits heute gegeben und brauchen nur noch eingesetzt werden.}, language = {de} }