@article{LaumerKargSchmidt, author = {Laumer, Tobias and Karg, Michael Cornelius Hermann and Schmidt, Michael}, title = {Laser Beam Melting of Multi-Material Components}, series = {Physics Procedia}, volume = {39}, journal = {Physics Procedia}, publisher = {Elsevier}, issn = {1875-3892}, doi = {10.1016/j.phpro.2012.10.068}, pages = {518 -- 525}, abstract = {First results regarding the realisation of multi-material components manufactured by Laser Beam Melting of polymers and metals are published. For realising composite structures from polymer powders by additive manufacturing, at first relevant material properties regarding compatibility have to be analysed. The paper shows the main requirements for compatibility between different materials and offers first results in form of a compatibility matrix of possible combinations for composite structures.For achieving gradient properties of additively manufactured metal parts by using composite materials the composition of alloying components in the powder and adapted process strategies are varied. As an alternative to atomizing pre-alloyed materials, mixtures of different powders are investigated.}, language = {en} } @inproceedings{LaumerKargSchmidt, author = {Laumer, Tobias and Karg, Michael Cornelius Hermann and Schmidt, Michael}, title = {Neue Prozessstrategien zur Herstellung von Multi- Material-Bauteilen und Gradientenwerkstoffen}, series = {Zukunft individuell gestalten : Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung ; [Dezember 2012 ; N{\"u}rnberg]}, booktitle = {Zukunft individuell gestalten : Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung ; [Dezember 2012 ; N{\"u}rnberg]}, address = {Erlangen}, pages = {101 -- 116}, abstract = {Das additive Fertigungsverfahren, dem gemeinhin die gr{\"o}ßten Potentiale zugesprochen werden, ist das Laserstrahlschmelzen im Pulverbett von Kunststoffen (LSS-K) und von Metallen (LSS-M). Wie bei anderen Techniken der additiven Fertigung werden Bauteile direkt aus CAD-Dateien ohne zus{\"a}tzliche Werkzeuge bei enormer konstruktiver Freiheit gefertigt. Die resultierenden Werkstoffeigenschaften sind vergleichbar mit konventionelleren Prozessrouten wie etwa dem Spritzgießen thermoplastischer Polymere beziehungsweise auf der Seite der Metalle dem Schmieden oder Gießen. Derzeit wird der Einsatz des LSS zur Fertigung von Endprodukten in kleinen St{\"u}ckzahlen erschwert von nicht ausreichender Prozessstabilit{\"a}t und, insbesondere bei Kunststoffen, von der eingeschr{\"a}nkten Werkstoffauswahl. Bisher werden f{\"u}r beide Werkstoffklassen Bauteile aus jeweils einem einzigen Ausgangsmaterial hergestellt. N{\"a}herungsweise erzeugt LSS also einheitliche Materialeigenschaften {\"u}ber das gesamte Bauteil hinweg. Ein Ansatz, der in den Teilprojekten A5 und B6 des Sonderforschungsbereichs 814 verfolgt wird, ist die Realisierung von Multi-Material-Bauteilen mittels LSS-K beziehungsweise LSS-M.}, language = {de} } @inproceedings{LaumerKargSchmidt, author = {Laumer, Tobias and Karg, Michael Cornelius Hermann and Schmidt, Michael}, title = {Additive Manufacturing of Gradient and Multimaterial Components}, series = {International Conference on Competitive Manufacturing COMA, 2013, Stellenbosch}, booktitle = {International Conference on Competitive Manufacturing COMA, 2013, Stellenbosch}, abstract = {In the paper first results regarding the realisation of gradient and multi-material parts manufactured by Laser Beam Melting in powder bed of metals and polymers are published. Gradient properties of additively manufactured metal parts can be achieved by varying the composition of alloying components in the powder and adapting process strategies. As an alternative to atomizing pre-alloyed materials, mixtures of different powders are investigated. For realizing multi-material-parts from polymers, at first relevant material properties concerning compatibility have to be analysed. Therefore the paper shows the main requirements for compatibility between different materials and also first results regarding the compatibility of polymer powders and possible combinations for the manufacturing of multi-material components by laser beam melting of polymers.}, language = {en} } @inproceedings{LaumerKargSchmidt, author = {Laumer, Tobias and Karg, Michael Cornelius Hermann and Schmidt, Michael}, title = {Neue Prozessstrategien zur Herstellung von Multi-Material-Bauteilen mit Hilfe des Laserstrahlschmelzens}, series = {Industriekolloquium des SFB 814, 2, 2013, N{\"u}rnberg}, booktitle = {Industriekolloquium des SFB 814, 2, 2013, N{\"u}rnberg}, publisher = {Universit{\"a}t Erlangen-N{\"u}rnberg, Lehrstuhl f{\"u}r Kunststofftechnik}, isbn = {978-3-931864-59-0}, language = {de} }