@article{SchudererRillSchaefferetal., author = {Schuderer, Matthias and Rill, Georg and Schaeffer, Thomas and Schulz, Carsten}, title = {Friction modeling from a practical point of view}, series = {Multibody System Dynamics}, journal = {Multibody System Dynamics}, publisher = {Springernature}, issn = {1384-5640}, doi = {10.1007/s11044-024-09978-0}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-72513}, pages = {18}, abstract = {AbstractRegularized static friction models have been used successfully for many years. However, they are unable to maintain static friction in detail. For this reason, dynamic friction models have been developed and published in the literature. However, commercial multibody simulation packages such as Adams, RecurDyn, and Simpack have developed their own specific stick-slip models instead of adopting one of the public domain approaches. This article introduces the fundamentals of these commercial models and their behavior from a practical point of view. The stick-slip models were applied to a simple test model and a more sophisticated model of a festoon cable system using their standard parameters.}, language = {en} } @misc{SchudererRillSchulzetal., author = {Schuderer, Matthias and Rill, Georg and Schulz, Carsten and Schaeffer, Thomas}, title = {Influence of fictitious bristle parameters in dynamic friction models}, series = {Global Annual Meet on Mechanical and Aerospace Engineering (GAMMAE2025), March 10-12, 2025, Rome, Italy}, journal = {Global Annual Meet on Mechanical and Aerospace Engineering (GAMMAE2025), March 10-12, 2025, Rome, Italy}, doi = {10.35096/othr/pub-8034}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-80348}, abstract = {In this study, the influence of bristle parameters in dynamic friction models is investigated, in particular in the LuGre and FrD2 models. These models contain internal states to better capture the friction behavior. The FrD2 model, a second-order dynamic friction model, aims at higher accuracy. The investigation focuses on how the independent variation of the bristle stiffness and the damping parameters affects the model behavior, especially considering the practical approximations used in determining the damping coefficient.}, language = {en} } @misc{SchudererRillSchulzetal., author = {Schuderer, Matthias and Rill, Georg and Schulz, Carsten and Schaeffer, Thomas}, title = {Dynamic Stick-Slip Models based on Continuous and Discontinuous Friction Characteristics}, series = {ENOC - European Nonlinear Dynamics Conference, 11th, 2024, Delft}, journal = {ENOC - European Nonlinear Dynamics Conference, 11th, 2024, Delft}, doi = {10.2139/ssrn.5014569}, pages = {17}, abstract = {This paper presents the implementation of a recently developed continuous second-order dynamic friction model (FrD2) in the commercial multibody system software Simpack, where it is evaluated against Simpack's discontinuous friction model for stick-slip applications in terms of performance. A method for adapting parameters from the well-known LuGre model to the FrD2 model is introduced. The FrD2 model accurately captures complex friction phenomena, including the Stribeck effect, which is essential for simulating friction-induced vibrations. Tested on a festoon cable system and a belt model, the FrD2 model demonstrates itself as a robust alternative to both the LuGre and Simpack models, especially for applications requiring continuous transitions between static and dynamic friction states, long-term stiction effects, and other complex friction behaviors.}, language = {en} } @misc{SchudererRillSchaefferetal., author = {Schuderer, Matthias and Rill, Georg and Schaeffer, Thomas and Schulz, Carsten}, title = {Friction modeling from a practical point of view}, series = {MULTIBODY2023: 11th ECCOMAS Thematic Conference on Multibody Dynamics, Tampa, 24th-28th May 2023}, journal = {MULTIBODY2023: 11th ECCOMAS Thematic Conference on Multibody Dynamics, Tampa, 24th-28th May 2023}, language = {en} }