@inproceedings{GoetzRauchBrueckl, author = {Goetz, Rebecca and Rauch, Johannes and Br{\"u}ckl, Oliver}, title = {Techno-economic analysis of reactive power sources}, series = {NEIS 2021, Conference on Sustainable Energy Supply and Energy Storage Systems: Hamburg, 13.-14. September 2021}, booktitle = {NEIS 2021, Conference on Sustainable Energy Supply and Energy Storage Systems: Hamburg, 13.-14. September 2021}, editor = {Schulz, Detlef}, publisher = {VDE-Verlag}, isbn = {978-3-8007-5651-3}, pages = {286 -- 291}, abstract = {This paper presents different options to provide reactive power in electricity grid systems. Since conventional power plants are being phased out and the reactive power demand tends to increase, alternative technologies are needed to cover it. reactive power sources are being defined and specified in this submission. A technical evaluation and an economic analysis of selected reactive power sources are carried out, based on interviews with manufacturers and operators. As well a multifactorial techno-economic comparison of the evaluated reactive power sources is presented. The technical analysis addresses reactive power control-ranges, stochastic parameters, lifespans, electrical losses and dynamics of re-active power sources. It states that power electronics allow faster setpoint changes than mechanical technologies can achieve, but at the same time this is associated with the highest electrical losses of the reactive power sources considered here. Considering the economic analysis, relative investment costs per reactive power of conventional compensation systems turn out to be the most cost-efficient. With regard to the multifactorial techno-economic comparison, it is im-portant not only to standardize on reactive power that can be provided, but also to include the additional system-relevant properties of technologies in the evaluation as well as the costs in operation.}, language = {en} } @article{RauchBrueckl, author = {Rauch, Johannes and Br{\"u}ckl, Oliver}, title = {Achieving Optimal Reactive Power Compensation in Distribution Grids by Using Industrial Compensation Systems}, series = {Electricity}, volume = {4}, journal = {Electricity}, number = {1}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/electricity4010006}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-59139}, pages = {78 -- 95}, abstract = {This paper presents a method for integrating industrial consumers owning compensation systems as alternative reactive power sources into grid operating processes. In remuneration, they receive a market-based provision of reactive power. The aim is to analyze the potential of reactive power compensation systems of industrial companies connected to medium-voltage (10 kV-30 kV) AC grids in order to increase the reactive power ability of distribution grids. Measurement methods and reactive power potential results of six industrial companies are presented to characterize the amount and temporal availability of their reactive power potential. The presented approach for using the decentralized reactive power potential is a centralized reactive power control method and is based on optimal power flow (OPF) calculations. An optimization algorithm based on linear programming is used to coordinate a reactive power retrieval tuned to the actual demand. The influencing quantities are the current grid status (voltage and load flow capacity reserves at grid nodes and power lines) and the current reactive power potential of the reactive power sources. The compensation impact of six measured industrial companies on an exemplary medium-voltage grid is shown by an application example.}, language = {en} } @inproceedings{RauchBruecklEngel, author = {Rauch, Johannes and Br{\"u}ckl, Oliver and Engel, Bernd}, title = {Analysis and optimization of the steady state voltage deviation demand for reactive power planning using installed reactive power sources}, series = {NEIS 2022; Conference on Sustainable Energy Supply and Energy Storage Systems, 26-27 September 2022, Hamburg}, booktitle = {NEIS 2022; Conference on Sustainable Energy Supply and Energy Storage Systems, 26-27 September 2022, Hamburg}, editor = {Schulz, Detlef}, publisher = {VDE-Verlag}, address = {Berlin}, isbn = {978-3-8007-5983-5}, issn = {2510-6902}, pages = {175 -- 182}, abstract = {The provision of reactive power is one option for maintaining the grid voltage, that is defined as an ancillary service in Germany. This paper presents an approach for determining deficient voltage deviation demands within an electrical grid for long term reactive power planning investigations. In contrast to previous approaches, which evaluate the Q-behavior of extended ward elements or grid assets, voltage deviations are analyzed bus-specifically. So further reactive power planning investigations are able to scale and optimize additional reactive power sources directly on planning voltage limits using load flow sensitivity techniques. The focus lies on the analysis of the steady state demand at base case conditions. Therefore, a grid planning process is conceptualized. An optimal power flow algorithm based on Differential Evolution is used for an optimal reactive power dispatch of installed reactive power sources, e. g. reactive power compensation systems or (renewable) energy sources to minimize the total voltage deviation according to voltage limits of Transmission System Operators planning principles. Methodological and processuals specifications as well as an application use case with an exemplary transmission system are presented in this paper.}, language = {en} } @inproceedings{SchweibererRauchBrueckl, author = {Schweiberer, Philipp and Rauch, Johannes and Br{\"u}ckl, Oliver}, title = {Long-term analysis of industrial reactive power potentials with consideration of plant-internal grid restrictions using the example of an industrial plant in a distribution grid}, series = {NEIS 2022; Conference on Sustainable Energy Supply and Energy Storage Systems, 26-27 September 2022, Hamburg}, booktitle = {NEIS 2022; Conference on Sustainable Energy Supply and Energy Storage Systems, 26-27 September 2022, Hamburg}, editor = {Schulz, Detlef}, publisher = {VDE-Verlag}, address = {Berlin}, isbn = {978-3-8007-5983-5}, issn = {2510-6902}, pages = {51 -- 56}, abstract = {Since conventional generation plants provide a considerable share of reactive power but are gradually being shut down due to energy transition, leading to power deficits at the transmission grid level, new concepts for the supply of reactive power must be developed. As one possibility for the latter, industrial plants in the distribution grid are considered suitable, as their reactive power potentials can contribute to voltage maintenance and thus to a grid- or system-serving behavior. In this paper, the determination of reactive power potentials provided by industrial compensation systems (ICS) is presented. An industrial plant in the medium voltage grid, with three installed ICSs, is investigated. The potentials are determined and described based on their time characteristics, which provide information about the occurrence and distribution of inductive and capacitive potentials. A grid simulation of the investigated industrial grid is used to analyze the effects of retrieving the reactive power potentials regarding equipment utilizations and voltage limits.}, language = {en} } @inproceedings{HinterreiterBruecklRauch, author = {Hinterreiter, Marion and Br{\"u}ckl, Oliver and Rauch, Johannes}, title = {Methodology for long-term reactive power forecasts of medium-voltage grids}, series = {NEIS 2025 : Conference on Sustainable Energy Supply and Energy Storage Systems, Hamburg, September 15 - 16, 2025}, booktitle = {NEIS 2025 : Conference on Sustainable Energy Supply and Energy Storage Systems, Hamburg, September 15 - 16, 2025}, editor = {Schulz, Detlef}, publisher = {VDE Verlag}, isbn = {978-3-8007-6633-8}, pages = {218 -- 223}, abstract = {Understanding and assessing the long-term behavior of reactive power is crucial for power system planning and invest-ment decisions. This is particularly growing relevant for the lower voltage-grid levels, which are gaining importance due to significant changes in grid behavior, operational strategies, energy generation and consumption patterns. Currently, standardized methodologies for forecasting reactive power in medium-voltage grids are lacking, creating a gap in research and practical applications. To optimize grid investments and expansions, informed decisions based on reliable research and accurate forecasts are essential. This paper presents a methodology for long-term reactive power forecasting in me-dium-voltage grids, introducing a new approach to account for low- and medium-voltage grid interactions while address-ing common challenges like limited available grid data and scenario framework definition. The aim of the forecast is the future reactive power behaviour of a medium-voltage-grid at the high-voltage side of the high-voltage to medium-voltage transformer. The medium-voltage-level is modelled using a grid model approach, while low-voltage grids are being mod-elled using generic distribution grids. A 209-bus medium-voltage-grid model is used as an application example and to provide two exemplary use cases for a reactive power forecast for 2045.}, language = {en} } @inproceedings{HinterreiterBruecklRauch, author = {Hinterreiter, Marion and Br{\"u}ckl, Oliver and Rauch, Johannes}, title = {Challenges and Approaches for Long-Term Reactive Power Forecasting in Power Systems}, series = {PESS 2025 - IEEE Power and Energy Student Summit, October 08 - 10, 2025 in Munich, Germany}, booktitle = {PESS 2025 - IEEE Power and Energy Student Summit, October 08 - 10, 2025 in Munich, Germany}, editor = {Technische Universit{\"a}t M{\"u}nchen,}, publisher = {VDE Verlag}, isbn = {978-3-8007-6656-7}, pages = {109 -- 114}, abstract = {The transition from fossil fuels to renewable energy sources is driving profound changes across all voltage levels of the electrical grid, altering active power (P) as well as reactive power (Q) behavior. This transformation involves a shift from predominantly top-down, unidirectional electricity flows to bidirectional and increasingly complex flow patterns, fundamentally altering the operation and utilization of power systems. Many countries are already reporting notable changes in their transmission grid Q. This can lead to increased costs for grid expansion and compensation equipment, as well as grid losses. To minimize these losses and ensure grid stability and efficiency, understanding and forecasting Q long-term becomes essential. This paper addresses the challenges of long-term (1-20 years) Q forecasting in general by analyzing Q behavior in grids, the main influencing grid parameters, and reviewing existing forecasting approaches. It evaluates the applicability of these approaches and highlights current research gaps and trends. By focusing on this underexplored area, the paper aims to support the development of more advanced and reliable long-term Q forecasting techniques.}, language = {en} }