@inproceedings{NiedernhuberEhrlichHoltmannspoetter, author = {Niedernhuber, Michal and Ehrlich, Ingo and Holtmannsp{\"o}tter, Jens}, title = {Fiber-Oriented Repair of Fiber Reinforced Plastics: Investigations on Tensile Specimens}, series = {4th Applied Research Conference - ARC 2014, 5th July 2014, Ingolstadt}, booktitle = {4th Applied Research Conference - ARC 2014, 5th July 2014, Ingolstadt}, editor = {Ziemann, Olaf and Mottok, J{\"u}rgen and Pforr, Johannes}, publisher = {Shaker}, address = {Aachen}, pages = {298 -- 302}, language = {en} } @inproceedings{PongratzEhrlich, author = {Pongratz, Christian and Ehrlich, Ingo}, title = {Structural Dynamic Analysis of Thin Composite Plates Using Noncontact Measurement and Excitation}, series = {Applied Research Conference 2016 - ARC 2016, Augsburg, 24 June 2016}, booktitle = {Applied Research Conference 2016 - ARC 2016, Augsburg, 24 June 2016}, editor = {Mottok, J{\"u}rgen and Reichenberger, Marcus and Stolle, Reinhard}, publisher = {Pro Business Verlag}, address = {Berlin}, isbn = {978-3-86460-494-2}, pages = {351 -- 358}, language = {en} } @techreport{PongratzEhrlich, author = {Pongratz, Christian and Ehrlich, Ingo}, title = {DampSIM: Lebensdauer{\"u}berwachung von faserverst{\"a}rkten Kunststoffen auf Basis der strukurdynamischen Werkstoffd{\"a}mpfung}, series = {Forschungsbericht 2017 / Ostbayerische Technische Hochschule Regensburg}, journal = {Forschungsbericht 2017 / Ostbayerische Technische Hochschule Regensburg}, editor = {Baier, Wolfgang}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-9818209-3-5}, pages = {62 -- 63}, language = {de} } @techreport{PongratzEhrlich, author = {Pongratz, Christian and Ehrlich, Ingo}, title = {High-End-Strukturen f{\"u}r den Leichtbau - mit faserverst{\"a}rktem 3D-Druck}, series = {Forschung 2018 / Ostbayerische Technische Hochschule Regensburg}, journal = {Forschung 2018 / Ostbayerische Technische Hochschule Regensburg}, editor = {Baier, Wolfgang}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-9818209-4-2}, pages = {64 -- 65}, language = {de} } @misc{JudenmannPongratzEhrlichetal., author = {Judenmann, Anna and Pongratz, Christian and Ehrlich, Ingo and H{\"o}fer, Philipp and Holtmannsp{\"o}tter, Jens}, title = {Additive Fertigung von endlosfaserverst{\"a}rkten Kunststoffstrukturen}, series = {M{\"u}nchner Leichtbauseminar 2022, 26. October 2022, 16. November 2022, 30 November 2022, Munich/Neubiberg/Garching}, journal = {M{\"u}nchner Leichtbauseminar 2022, 26. October 2022, 16. November 2022, 30 November 2022, Munich/Neubiberg/Garching}, abstract = {Additive Fertigung hat sich in zahlreichen industriellen Anwendungen etabliert und bildet eine wichtige Schl{\"u}sseltechnologie. Im Gegensatz zu metallischen Werkstoffen, haben additiv gefertigte Bauteile aus Kunststoffen geringere Festigkeit und Steifigkeit, sodass sich ihre Verwendung als lasttragende Strukturen schwierig gestaltet. Insbesondere der Einsatz von endlosen Verst{\"a}rkungsfasern kann die mechanischen Eigenschaften additiv gefertigter Strukturen signifikant verbessern und die Fertigung hochbelastbarer Faserverbundstrukturen im 3D-Druckverfahren erm{\"o}glichen. Daher gilt es aktuell notwendige Anlagen und Prozessketten f{\"u}r den Fertigungsprozess aber auch Vorgehensweisen f{\"u}r die belastungsoptimierte Auslegung der Faserverl{\"a}ufe innerhalb des Bauteils zu entwickeln, um so das Themengebiet „Endlosfaserverst{\"a}rkter 3D-Druck" weiter voranzutreiben. F{\"u}r mehr r{\"a}umliche Freiheit bei der Positionierung der Druckbahnen k{\"o}nnen industrieroboterbasierte Systeme eingesetzt werden, um so das Potenzial gerichteter Bauweise von Faserverbundstrukturen auch im additiven Fertigungsprozess vollumf{\"a}nglich aussch{\"o}pfen zu k{\"o}nnen. Dabei erm{\"o}glicht ihr Einsatz auch eine r{\"a}umliche Ablage der Faserverst{\"a}rkung, wobei f{\"u}r die Materialablage ein geeigneter 3D-Druckkopf erforderlich ist. F{\"u}r die Implementierung der Faserverst{\"a}rkung ist zudem eine dem Lastfall entsprechende Auslegung des Bauteils sowie die Ermittlung einer sinnvollen Faserpositionierung innerhalb des Bauteils erforderlich, wobei unterschiedliche Variablen aus den Bereichen Material, Struktur und Fertigungsprozess ber{\"u}cksichtigt werden m{\"u}ssen. Im Rahmen des Vortrages werden die Herausforderungen der Technologieentwicklung des endlosfaserverst{\"a}rkten 3D-Drucks aufgegriffen sowie auf eine belastungsorientierte Faserpositionierung n{\"a}her eingegangen. Aktuelle Erkenntnisse werden diskutiert sowie eine Entwurfsmethodik f{\"u}r die Prozesspfadgenerierung vorgeschlagen.}, language = {de} } @misc{OlbrichPongratzBierletal., author = {Olbrich, Florian and Pongratz, Christian and Bierl, Rudolf and Ehrlich, Ingo}, title = {Method and System for Evaluating a Structural Integrity of an Aerial Vehicle}, series = {Europ{\"a}isches Patentblatt (09.12.2020) zur Anmeldung: OTH Regensburg, Anmeldenummer: 19179054.2, Patentnummer 1001/3748327, Ver{\"o}ffentlichungsnummer: 3 748 327}, journal = {Europ{\"a}isches Patentblatt (09.12.2020) zur Anmeldung: OTH Regensburg, Anmeldenummer: 19179054.2, Patentnummer 1001/3748327, Ver{\"o}ffentlichungsnummer: 3 748 327}, pages = {395 -- 396}, language = {en} } @article{NiedernhuberHoltmannspoetterEhrlich, author = {Niedernhuber, Michal and Holtmannsp{\"o}tter, Jens and Ehrlich, Ingo}, title = {Fiber-oriented repair geometries for composite materials}, series = {Composites, Part B}, volume = {94}, journal = {Composites, Part B}, doi = {10.1016/j.compositesb.2016.03.027}, pages = {327 -- 337}, abstract = {In this paper, the idea of fiber-oriented repair geometries for carbon fiber reinforced plastics (CFRP) is investigated. It considers the differing mechanical properties of unidirectional fiber reinforced material by excluding overlapping regions perpendicular to the fiber direction of the particular layer. A mechanical and numerical comparison of tensile strength of stepped joints with continuous step lengths per ply and stepped joints with reduced step lengths in plies with fiber orientation differing from load direction is performed. Finite element simulations show similar shear stresses. Mechanical tests of CFRP laminates with stepped joints show no significant deviation in tensile strength, in spite of a joint length reduction of nearly 40\%. This leads to the possibility of a significant reduction of repair area.}, language = {en} } @article{PongratzSchlampJungbaueretal., author = {Pongratz, Christian and Schlamp, Matthias and Jungbauer, Bastian and Ehrlich, Ingo and Petratos, P. and Mourtos, N.}, title = {Detection of Delamination Damages in Thin Composite Plates using Noncontact Measurement of Structural Dynamic Behavior}, series = {Athens Journal of Technology \& Engineering}, volume = {3}, journal = {Athens Journal of Technology \& Engineering}, number = {4}, doi = {10.30958/AJTE.3-4-3}, pages = {315 -- 331}, language = {en} } @misc{OlbrichPongratzBierletal., author = {Olbrich, Florian and Pongratz, Christian and Bierl, Rudolf and Ehrlich, Ingo}, title = {Method and System for Evaluating a Structural Integrity of an Aerial Vehicle}, language = {en} } @misc{BroserFalterŁawrowskietal., author = {Broser, Christian and Falter, Thomas and Ławrowski, Robert Damian and Altenbuchner, Amelie and V{\"o}gele, Daniel and Koss, Claus and Schlamp, Matthias and Dunnweber, Jan and Steffens, Oliver and Heckner, Markus and Jaritz, Sabine and Schiegl, Thomas and Corsten, Sabine and Lauer, Norina and Guertler, Katherine and Koenig, Eric and Haug, Sonja and Huber, Dominik and Birkenmaier, Clemens and Krenkel, Lars and Wagner, Thomas and Justus, Xenia and Saßmannshausen, Sean Patrick and Kleine, Nadine and Weber, Karsten and Braun, Carina N. and Giacoppo, Giuliano and Heinrich, Michael and Just, Tobias and Schreck, Thomas and Schnabl, Andreas and Gilmore, Amador T{\´e}ran and Roeslin, Samuel and Schmid, Sandra and Wellnitz, Felix and Malz, Sebastian and Maurial, Andreas and Hauser, Florian and Mottok, J{\"u}rgen and Klettke, Meike and Scherzinger, Stefanie and St{\"o}rl, Uta and Heckner, Markus and Bazo, Alexander and Wolff, Christian and Kopper, Andreas and Westner, Markus and Pongratz, Christian and Ehrlich, Ingo and Briem, Ulrich and Hederer, Sebastian and Wagner, Marcus and Schillinger, Moritz and G{\"o}rlach, Julien and Hierl, Stefan and Siegl, Marco and Langer, Christoph and Hausladen, Matthias and Schreiner, Rupert and Haslbeck, Matthias and Kreuzer, Reinhard and Br{\"u}ckl, Oliver and Dawoud, Belal and Rabl, Hans-Peter and Gamisch, Bernd and Schmidt, Ottfried and Heberl, Michael and G{\"a}nsbauer, Bianca and Bick, Werner and Ellermeier, Andreas and Monkman, Gareth J. and Prem, Nina and Sindersberger, Dirk and Tschurtschenthaler, Karl and Aurbach, Maximilian and Dendorfer, Sebastian and Betz, Michael A. and Szecsey, Tamara and Mauerer, Wolfgang and Murr, Florian}, title = {Forschung 2018}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-9818209-5-9}, doi = {10.35096/othr/pub-1382}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-13826}, pages = {98}, subject = {Forschung}, language = {de} } @article{GebhardtSchlampEhrlichetal., author = {Gebhardt, Jakob and Schlamp, Matthias and Ehrlich, Ingo and Hiermaier, Stefan}, title = {Low-velocity impact behavior of elliptic curved composite structures}, series = {International Journal of Impact Engineering}, volume = {180}, journal = {International Journal of Impact Engineering}, publisher = {Elsevier}, doi = {10.1016/j.ijimpeng.2023.104663}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-59304}, pages = {8}, abstract = {Although many composite structures are inconsistently curved, such as the leading edges of aircraft wings, the variety of research in impact engineering is almost limited to the impact performance of plates or cylindrically curved specimens. It is not known whether the findings obtained from standardized tests can be transferred to curved structures or which adaptions are required. Therefore, a deeper understanding of the deformation and damage behavior of inconsistently curved structures is essential to transfer the observed impact behavior of flat specimens to general curved structures and therefore to utilize the full lightweight potential of a load-specific design. An accurate description of the procedure as well as the results of the experimental and numerical study of the low-velocity impact behavior of differently single-curved elliptic specimens is presented. To close the research gap of the impact behavior of geometries with curvatures between the plates and simplified leading edges, novel specimens geometries have been derived from established impact test standards. Glassfiber-reinforced specimens are subjected to an instrumented impact test at constant impact energy. This is numerically investigated by a stacked-layer model, which used cohesive zone modeling to enable the simulation of matrix cracking, fiber fracture and delamination. The resulting projected damage areas, as well as the force and deflection histories, were evaluated and section cuts were examined to discuss the damage morphology, formation and propagation process. Significant effects on maximum deflection, compliance and dynamic behavior on the size and morphology of damage were found.}, language = {en} } @misc{RueckBierlLechneretal., author = {R{\"u}ck, Thomas and Bierl, Rudolf and Lechner, Alfred and Graf, Antonia and Dams, Florian and Schreiner, Rupert and Auchter, Eberhard and Kriz, Willy and Deubzer, MIchael and Schiller, Frank and Mottok, J{\"u}rgen and Niemetz, Michael and Margull, Ulrich and Hagel, Georg and Utesch, Matthias and Waldherr, Franz and B{\"o}hm, Matthias and Fraunhoffer, Judith and Gardeia, Armin and Schneider, Ralph and Streubel, Janet and Landes, Dieter and Studt, Reimer and Peuker, Dominik and Scharfenberg, Georg and Hook, Christian and Schuster, Dietwald and Ehrlich, Ingo and Dinnebier, Heinrich and Briem, Ulrich and L{\"a}mmlein, Stephan and Koder, Alexander and Bialek, Adam and Genewsky, Axel and Neumeier, Michael and Schlosser, Philipp and Rabl, Hans-Peter and Paule, Matthias and Galster, Christoph and Schiedermeier, Michael and Zwickel, Andreas and Hobmeier, Christoph and Bischoff, Tobias and Rill, Georg and Schaeffer, Thomas and Arbesmeier, Martin and Groß, Andreas and Schlegl, Thomas and Becker, Mark and Senn, Konrad and Schliekmann, Claus and Scholz, Peter and Sippl, Christian and Grill, Martin}, title = {Forschungsbericht 2011 / Hochschule f{\"u}r Angewandte Wissenschaften - Fachhochschule Regensburg}, editor = {Eckstein, Josef}, address = {Regensburg}, organization = {Hochschule f{\"u}r Angewandte Wissenschaften Regensburg}, issn = {1868-3533}, doi = {10.35096/othr/pub-732}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-7321}, language = {de} } @misc{SchimmerGebhardtMotschEichmannetal., author = {Schimmer, Florian and Gebhardt, Jakob and Motsch-Eichmann, N. and Hausmann, Joachim M. and Ehrlich, Ingo}, title = {The effect of curvature on the low-velocity impact resistance of CF/PEEK laminates}, series = {30 Years IVW Anniversary Colloquium, Leibnitz-Institut f{\"u}r Verbundwerkstoffe Kaiserslautern, 2021}, journal = {30 Years IVW Anniversary Colloquium, Leibnitz-Institut f{\"u}r Verbundwerkstoffe Kaiserslautern, 2021}, language = {en} } @article{AfanasevHoeferHoltmannspoetteretal., author = {Afanasev, Anna and H{\"o}fer, Philipp and Holtmannsp{\"o}tter, Jens and Zimmer, Felix and Ehrlich, Ingo}, title = {Development of a continuous fiber-reinforced 3D printing process with a 6-axis robot arm: Process design and equipment}, series = {The International Journal of Advanced Manufacturing Technology}, journal = {The International Journal of Advanced Manufacturing Technology}, publisher = {Springer}, issn = {0268-3768}, doi = {10.1007/s00170-025-17263-3}, pages = {20}, abstract = {The utilisation of 3D printing processes in the fabrication of continuous fiber-reinforced composites confers a multitude of advantages, in particular flexible design based on structural requirements. In order to achieve greater flexibility, there is a necessity for 3D printing systems that allow for customisable material selection and fiber positioning. This paper presents the design of a robot-based 3D printing system that incorporates an in-situ impregnation line and flexibility regarding the machine code generation for fiber positioning. The development of the system enabled the attainment of an average fiber volume content of up to 37.12\%. In the tensile tests, material characteristics up to E1 = 24.7 GPa and strength of up to RM1 = 0.51 GPa were determined.}, language = {en} }