@inproceedings{SykoraHolickyDiamantidis, author = {S{\´y}kora, Miroslav and Holicky, Milan and Diamantidis, Dimitris}, title = {Target Reliability for Existing Civil Engineering Systems}, series = {2016 Second International Symposium on Stochastic Models in Reliability Engineering, Life Science and Operations Management (SMRLO), 15-18 Feb. 2016, Beer Sheva, Israel}, booktitle = {2016 Second International Symposium on Stochastic Models in Reliability Engineering, Life Science and Operations Management (SMRLO), 15-18 Feb. 2016, Beer Sheva, Israel}, publisher = {IEEE}, doi = {10.1109/SMRLO.2016.28}, pages = {109 -- 114}, abstract = {Specification of the target reliability levels is one of the key issues of the assessment of existing systems. ISO 2394:2015 indicate procedures for specification of the target reliability levels by optimisation of the total cost related to an assumed remaining working life of a structural system. These approaches are critically compared with human safety criteria and with recommendations of present standards. It appears that the requirement on the same target reliability levels for existing civil engineering systems as for newly designed is uneconomical. Decisions in the assessment can result in the acceptance of the actual state or in upgrade of the existing structure, two reliability levels are thus needed - the minimum level below which the structure is unreliable and should be upgraded, and the target level indicating an optimum upgrade strategy. When reliability of a system or its key component is verified (as compared to design of a common component), the target reliability index should be increased by about 0.5.}, language = {en} } @article{SykoraDiamantidisHolickyetal., author = {S{\´y}kora, Miroslav and Diamantidis, Dimitris and Holicky, Milan and Jung, Karel}, title = {Target reliability for existing structures considering economic and societal aspects}, series = {Structure and infrastructure engineering}, volume = {13}, journal = {Structure and infrastructure engineering}, number = {1}, publisher = {Taylor\&Francis}, doi = {10.1080/15732479.2016.1198394}, pages = {181 -- 194}, abstract = {Specification of target reliability levels is one of the key issues of the assessment of existing structures. ISO 13822:2010 and ISO 2394:2015 indicate procedures for specification of target reliability levels by optimisation of the total cost related to an assumed remaining working life of a structure. These approaches are critically compared with human safety criteria, with target levels based on a marginal life-saving costs principle, and with recommendations of present standards. Optimal target reliability levels are then derived in the representative case study for an existing structural member. It appears that the requirement to reach the same target reliability levels for existing and new structures is uneconomical. Decisions made in the assessment can result in the acceptance of the actual state or in the upgrade of an existing structure. Two reliability levels are thus needed - the minimum level below which the structure is unreliable and should be upgraded, and the target level indicating an optimum upgrade strategy. It is recommended that these levels be established using economic optimisation and the marginal life-saving costs principle, as both the approaches take into account the costs of safety measures and the failure consequences.}, language = {en} }