@misc{MauererRexhepajMonkmanetal., author = {Mauerer, Wolfgang and Rexhepaj, Tanja and Monkman, Gareth J. and Sindersberger, Dirk and Diermeier, Andreas and Neidhart, Thomas and Wolfrum, Dominik and Sterner, Michael and Heberl, Michael and Nusko, Robert and Maier, Georg and Nagl, Klaus and Reuter, Monika and Hofrichter, Andreas and Lex, Thomas and Lesch, Florian and Kieninger, B{\"a}rbel and Szalo, Alexander Eduard and Zehner, Alexander and Palm, Christoph and Joblin, Mitchell and Apel, Sven and Ramsauer, Ralf and Lohmann, Daniel and Westner, Markus and Strasser, Artur and Munndi, Maximilian and Ebner, Lena and Elsner, Michael and Weiß, Nils and Segerer, Matthias and Hackenberg, Rudolf and Steger, Sebastian and Schmailzl, Anton and Dostalek, Michael and Armbruster, Dominik and Koch, Fabian and Hierl, Stefan and Thumann, Philipp and Swidergal, Krzysztof and Wagner, Marcus and Briem, Ulrich and Diermeier, Andreas and Spreitzer, Stefan and Beiderbeck, Sabrina and Hook, Christian and Zobel, Martin and Weber, Tim and Groß, Simon and Penzkofer, Rainer and Dendorfer, Sebastian and Schillitz, Ingo and Bauer, Thomas and Rudolph, Clarissa and Schmidt, Katja and Liebetruth, Thomas and Hamer, Markus and Haug, Sonja and Vernim, Matthias and Weber, Karsten and Saßmannshausen, Sean Patrick and Books, Sebastian and Neuleitner, Nikolaus and Rechenauer, Christian and Steffens, Oliver and Kusterle, Wolfgang and G{\"o}mmel, Roland and Wellnitz, Felix and Stierstorfer, Johannes and Stadler, Dominik and Hofmann, Matthias J. and Motschmann, Hubert and Shamonin (Chamonine), Mikhail and Bleicher, Veronika and Fischer, Sebastian and Hackenberg, Rudolf and Horn, Anton and Kawasch, Raphael and Petzenhauser, Michael and Probst, Tobias and Udalzow, Anton and Dams, Florian and Schreiner, Rupert and Langer, Christoph and Prommesberger, Christian and Ławrowski, Robert Damian}, title = {Forschungsbericht 2016}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, doi = {10.35096/othr/pub-1384}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-13840}, language = {de} } @inproceedings{SchmailzlStegerDostaleketal., author = {Schmailzl, Anton and Steger, Sebastian and Dostalek, Michael and Hierl, Stefan}, title = {Online process monitoring at quasi-simultaneous laser transmission welding using a 3D-scanner with integrated pyrometer}, series = {Proc. SPIE, Laser-based Micro- and Nanoprocessing X, SPIE LASE 2016, San Francisco, California, United States}, booktitle = {Proc. SPIE, Laser-based Micro- and Nanoprocessing X, SPIE LASE 2016, San Francisco, California, United States}, number = {97361J}, editor = {Klotzbach, U. and Washio, K. and Arnold, C. B.}, doi = {10.1117/12.2211705}, pages = {1 -- 7}, abstract = {Quasi-simultaneous laser transmission welding is a well-known joining technique for thermoplastics and mainly used in the automotive as well as in the medical industry. For process control usually the so called set-path monitoring is used, where the weld is specified as "good" if the irradiation time is inside a defined confidence interval. However, the detection of small-sized gaps or thermal damaged zones is not possible with this technique. The analyzation of the weld seam temperature during welding offers the possibility to overcome this problem. In this approach a 3D-scanner is used instead of a scanner with flat-field optic. By using a pyrometer in combination with a 3D-scanner no color-corrected optic is needed in order to provide that laser- and detection-spot are concentric. Experimental studies on polyethylene T-joints have shown that the quality of the signal is adequate, despite the use of an optical setup with a long working distance and a small optical aperture. The effects on temperature are studied for defects like a gap in the joining zone. Therefore a notch was milled into the absorbent polymer. In case of producing housings for electronic parts the effect of an electrical wire between the joining partners is also investigated. Both defects can be identified by a local temperature deviation even at a feed rate of four meters per second. Furthermore a strategy for signal-processing is demonstrated. By this, remaining defects can be identified. Consequently an online detection of local defects is possible, which makes a dynamic process control feasible.}, language = {en} } @techreport{StegerSchmailzlDostaleketal., author = {Steger, Sebastian and Schmailzl, Anton and Dostalek, Michael and Armbruster, Dominik and Hierl, Stefan}, title = {Entwicklung einer Systemtechnik f{\"u}r das quasisimultane Laser-Durchstrahlschweißen von 3D-Kunststoffbauteilen mit Temperaturmessung und Spanndruckregelung}, series = {OTH Forschungsbericht 2016}, journal = {OTH Forschungsbericht 2016}, editor = {Baier, Wolfgang}, publisher = {Inixmedia GmbH}, address = {Kiel}, organization = {Ostbayerische Technische Hochschule Regensburg}, pages = {37 -- 38}, language = {de} } @inproceedings{SchmailzlArmbrusterDostaleketal., author = {Schmailzl, Anton and Armbruster, Dominik and Dostalek, Michael and Steger, Sebastian and Hierl, Stefan}, title = {Strahlf{\"u}hrungs- und -formungskonzept zur koaxialen Temperaturmessung beim scanner-basierten Laser-Durchstrahlschweißen}, series = {2. OTH-Clusterkonferenz, 18. Januar 2017, Techbase, Regensburg, Tagungsband}, booktitle = {2. OTH-Clusterkonferenz, 18. Januar 2017, Techbase, Regensburg, Tagungsband}, editor = {Falter, Thomas}, publisher = {Weber Druck}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg; Ostbayerische Technische Hochschule Amberg-Weiden}, pages = {201 -- 204}, language = {de} } @inproceedings{DostalekHierl, author = {Dostalek, Michael and Hierl, Stefan}, title = {Experimental study to evaluate the influence of clamping pressure variation during laser transmission welding of plastics}, series = {Applied Research Conference 2015 ARC 2015; 3rd July 2015 N{\"u}rnberg}, booktitle = {Applied Research Conference 2015 ARC 2015; 3rd July 2015 N{\"u}rnberg}, editor = {Mottok, J{\"u}rgen and Reichenberger, Marcus and Scharfenberg, Georg and Ziemann, Olaf}, publisher = {pro Business}, address = {Berlin}, pages = {289 -- 294}, language = {en} } @article{DostalekStegerSchmailzletal., author = {Dostalek, Michael and Steger, Sebastian and Schmailzl, Anton and Hierl, Stefan}, title = {Detecting Defects Reliably}, series = {Kunststoffe International}, volume = {105}, journal = {Kunststoffe International}, number = {12}, pages = {37 -- 40}, abstract = {The integration of a broadband pyrometer in a 3-D scanner enables a continuous and local temperature measurement during the quasi-simultaneous laser transmission welding process. Welding tests on polyethylene samples show that defects can be clearly identified based on the temperature signal, despite a high scanning velocity.}, language = {en} } @article{StegerDostalekSchmailzletal., author = {Steger, Sebastian and Dostalek, Michael and Schmailzl, Anton and Hierl, Stefan}, title = {Fehlstellen sicher erkennen}, series = {Kunststoffe}, volume = {105}, journal = {Kunststoffe}, number = {12}, pages = {55 -- 58}, language = {de} }