@article{KahlKrauseHackenbergetal., author = {Kahl, Matthias and Krause, Veronika and Hackenberg, Rudolf and Ul Haq, Anwar and Horn, Anton and Jacobsen, Hans-Arno and Kriechbaumer, Thomas and Petzenhauser, Michael and Shamonin (Chamonine), Mikhail and Udalzow, Anton}, title = {Measurement system and dataset for in-depth analysis of appliance energy consumption in industrial environment}, series = {tm - Technisches Messen}, volume = {86}, journal = {tm - Technisches Messen}, number = {1}, publisher = {De Gruyter}, doi = {10.1515/teme-2018-0038}, pages = {1 -- 13}, abstract = {To support a rational and efficient use of electrical energy in residential and industrial environments, Non-Intrusive Load Monitoring (NILM) provides several techniques to identify state and power consumption profiles of connected appliances. Design requirements for such systems include a low hardware and installations costs for residential, reliability and high-availability for industrial purposes, while keeping invasive interventions into the electrical infrastructure to a minimum. This work introduces a reference hardware setup that allows an in depth analysis of electrical energy consumption in industrial environments. To identify appliances and their consumption profile, appropriate identification algorithms are developed by the NILM community. To enable an evaluation of these algorithms on industrial appliances, we introduce the Laboratory-measured IndustriaL Appliance Characteristics (LILAC) dataset: 1302 measurements from one, two, and three concurrently running appliances of 15 appliance types, measured with the introduced testbed. To allow in-depth appliance consumption analysis, measurements were carried out with a sampling rate of 50 kHz and 16-bit amplitude resolution for voltage and current signals. We show in experiments that signal signatures, contained in the measurement data, allows one to distinguish the single measured electrical appliances with a baseline machine learning approach of nearly 100\% accuracy.}, language = {en} } @article{KostrovShamoninChamonineStepanovetal., author = {Kostrov, Sergei A. and Shamonin (Chamonine), Mikhail and Stepanov, Gennady V. and Kramarenko, Elena Yu}, title = {Magnetodielectric Response of Soft Magnetoactive Elastomers: Effects of Filler Concentration and Measurement Frequency}, series = {International Journal of Molecular Sciences}, volume = {20}, journal = {International Journal of Molecular Sciences}, number = {9}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/ijms20092230}, pages = {1 -- 13}, abstract = {The magnetodielectric response of magnetoactive elastomers (MAEs) in its dependence on filler concentration, magnetic field, and test frequency is studied experimentally. MAEs are synthesized on the basis of a silicone matrix filled with spherical carbonyl iron particles characterized by a mean diameter of 4.5 mu m. The concentration of the magnetic filler within composite materials is equal to 70, 75, and 80 mass\%. The effective lossless permittivity epsilon as well as the dielectric loss tan grow significantly when the magnetic field increases. The permittivity increases and the dielectric loss decreases with increasing filler concentration. In the measurement frequency range between 1 kHz and 200 kHz, the frequency hardly affects the values of epsilon and tan in the absence of a magnetic field. However, both parameters decrease considerably with the growing frequency in a constant magnetic field. The more strongly the magnetic field is applied, the larger the change in permittivity and loss tangent at the same test frequency is observed. An equivalent circuit formulation qualitatively describes the main tendencies of the magnetodielectric response.}, language = {en} } @article{BodnarukKalitaKulyketal., author = {Bodnaruk, Andrii V. and Kalita, Viktor M. and Kulyk, Mykola M. and Lozenko, Albert F. and Ryabchenko, Sergey M. and Snarskii, Andrei A. and Brunhuber, Alexander and Shamonin (Chamonine), Mikhail}, title = {Temperature blocking and magnetization of magnetoactive elastomers}, series = {Journal of Magnetism and Magnetic Materials}, volume = {471}, journal = {Journal of Magnetism and Magnetic Materials}, number = {February}, publisher = {Elsevier}, doi = {10.1016/j.jmmm.2018.10.005}, pages = {464 -- 467}, abstract = {The magnetization of a magnetoactive elastomer (MAE) with microparticles of soft magnetic carbonyl iron embedded in a highly elastic matrix has been studied. It is shown that at high temperatures its magnetization curve has the form of a specific hysteresis loop. This hysteresis is attributed to the influence of displacement of magnetized particles in the elastically soft elastomer matrix under the effect of magnetic forces, leading to the change of magnetic interaction between the particles. In this case, there is a maximum in the field dependence of the magnetic susceptibility, the occurrence of which has been associated with the competition between rearrangement of particles, when they are displaced in a magnetic field, and saturation of particles' magnetization. When the MAE is cooled below approximately 225 K, both the magnetic hysteresis and the maximum in the field dependence of the magnetic susceptibility disappear. When the MAE material is cooled below the solidification temperature of the elastomer matrix, the displacements of the magnetic particles during magnetization are blocked by the rigid matrix. The magnetization reversal of the MAE is reversible. This means that the shape of subsequent magnetization loops remains constant and the sample returns into the initial non-magnetized state after the magnetic field is turned off.}, language = {en} } @article{SnarskiiZorinetsShamoninChamonineetal., author = {Snarskii, Andrei A. and Zorinets, Denis and Shamonin (Chamonine), Mikhail and Kalita, Viktor M.}, title = {Theoretical method for calculation of effective properties of composite materials with reconfigurable microstructure}, series = {Physica A: Statistical Mechanics and its Applications}, volume = {535}, journal = {Physica A: Statistical Mechanics and its Applications}, number = {December}, publisher = {Elsevier}, doi = {10.1016/j.physa.2019.122467}, abstract = {We propose a theoretical approach for calculating effective electric and magnetic properties of composites, with field dependent restructuring of the filler. The theory combines the effective medium approximation, extended to a field-dependent (variable) percolation threshold, with an approximate treatment of the nonlinearity of material properties. Theoretical results are compared with experiments on magnetorheological elastomers, which in the context of investigated phenomena are often called magnetoactive elastomers (MAEs). In MAEs with soft polymer matrices, the mutual arrangement of inclusions changes in an applied magnetic field. This reorganization of the microstructure leads to unconventionally large changes of electrical and magnetic properties. The obtained theoretical results describe observed phenomena in MAEs well. For the magnetodielectric effect, qualitative agreement between theory and experiment is demonstrated. In the case of magnetic permeability, quantitative agreement is achieved. The theoretical approach presented can be useful for the development of field-controlled smart materials and design of intelligent structures on their basis, because the field dependence of physical properties can be predicted. (C) 2019 Elsevier B.V. All rights reserved.}, language = {en} } @article{GlavanKettlBrunhuberetal., author = {Glavan, Gašper and Kettl, Wolfgang and Brunhuber, Alexander and Shamonin (Chamonine), Mikhail and Drevenšek-Olenik, Irena}, title = {Effect of Material Composition on Tunable Surface Roughness of Magnetoactive Elastomers}, series = {Polymers}, volume = {11}, journal = {Polymers}, number = {4}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/polym11040594}, pages = {1 -- 13}, abstract = {We investigated magnetic-field-induced modifications of the surface roughness of magnetoactive elastomers (MAEs) with four material compositions incorporating two concentrations of ferromagnetic microparticles (70 wt\% and 80 wt\%) and exhibiting two shear storage moduli of the resulting composite material (about 10 kPa and 30 kPa). The analysis was primarily based on spread optical reflection measurements. The surfaces of all four materials were found to be very smooth in the absence of magnetic field (RMS roughness below 50 nm). A maximal field-induced roughness modification (approximately 1 m/T) was observed for the softer material with the lower filler concentration, and a minimal modification (less than 50 nm/T) was observed for the harder material with the higher filler concentration. All four materials showed a significant decrease in the total optical reflectivity with an increasing magnetic field as well. This effect is attributed to the existence of a distinct surface layer that is depleted of microparticles in the absence of a magnetic field but becomes filled with particles in the presence of the field. We analyzed the temporal response of the reflective properties to the switching on and off of the magnetic field and found switching-on response times of around 0.1 s and switching-off response times in the range of 0.3-0.6 s. These observations provide new insight into the magnetic-field-induced surface restructuring of MAEs and may be useful for the development of magnetically reconfigurable elastomeric optical surfaces.}, language = {en} } @article{BodnarukAndriiVBrunhuberetal., author = {Bodnaruk, and Andrii V., and Brunhuber, Alexander and Kalita, Viktor M. and Kulyk, Mykola M. and Kurzweil, Peter and Snarskii, Andrei A. and Lozenko, Albert F. and Ryabchenko, Sergey M. and Shamonin (Chamonine), Mikhail}, title = {Magnetic anisotropy in magnetoactive elastomers, enabled by matrix elasticity}, series = {Polymer}, volume = {162}, journal = {Polymer}, number = {January}, publisher = {Elsevier}, doi = {10.1016/j.polymer.2018.12.027}, pages = {63 -- 72}, abstract = {Polydimethylsiloxane based magnetoactive elastomers demonstrate above the melting transition range (e.g. at room temperature) an induced uniaxial magnetic anisotropy, which grows with increasing magnetic field. By freezing a material down to 150 K, displaced iron microparticles are immobilized, so that the magnetic anisotropy can be measured. Magnetic anisotropy "constant" is a consequence of particle displacements and a characteristic of the energy of internal deformations in the polymer matrix. The maximum anisotropy constant of the filling is at least one order of magnitude larger than the shear modulus of the pure elastomer (matrix). In a magnetic field, the gain in the rigidity of the composite material is attributed to the magnetomechanical coupling, which is in turn a source of anisotropy. The concept of effective magnetic field felt by the magnetization allows one to explain the magnetization curve at room temperature from low-temperature measurements. The results can be useful for developing vibration absorbers and isolators.}, language = {en} } @article{FetisovChashinSavelevetal., author = {Fetisov, Yuri K. and Chashin, Dmitri V. and Savelev, Dmitrii V. and Fetisov, Leonid Y. and Shamonin (Chamonine), Mikhail}, title = {Anisotropic Magnetoelectric Effect in a Planar Heterostructure Comprising Piezoelectric Ceramics and Magnetostrictive Fibrous Composite}, series = {Materials}, volume = {12}, journal = {Materials}, number = {19}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/ma12193228}, pages = {1 -- 13}, abstract = {The direct magnetoelectric (ME) effect is investigated in a planar structure comprising mechanically coupled layers of a magnetostrictive fibrous composite (MFC) and a piezoelectric ceramics (lead zirconate titanate, PZT). The MFC is an array of Ni-wires with a diameter of 200 mu m that are aligned parallel to each other in a single layer. The wires are separated by a distance of 250 or 500 mu m and fixed in a polyamide matrix. The structure was placed in a tangential constant field H and was excited by an alternating magnetic field h parallel to H, while the voltage generated by the PZT layer was measured. The resulting field dependences of the magnetization M(H) and the magnetostriction lambda(H) were determined by the orientation of the field H in the plane of the structure and the distance between the Ni-wires. The ME coupling coefficient of the structure decreased from 4.8 to 0.25 V/A when the orientation of H was changed from parallel to perpendicular to Ni-wires. With an increase in the excitation field amplitude h, a nonlinear ME effect in the output voltage, namely frequency doubling, was observed. The frequency and field dependences of the efficiency of the ME transduction in the MFC-piezoelectric heterostructure are well described by the existing theory.}, language = {en} } @article{SavelevFetisovChashinetal., author = {Savelev, Dmitrii V. and Fetisov, Leonid Y. and Chashin, Dmitri V. and Shabin, P. A. and Vyunik, D. A. and Fedulov, Feodor and Kettl, Wolfgang and Shamonin (Chamonine), Mikhail}, title = {Method of Measuring Deformations of Magnetoactive Elastomers under the Action of Magnetic Fields}, series = {Russian Technological Journal}, volume = {7}, journal = {Russian Technological Journal}, number = {4}, doi = {10.32362/2500-316x-2019-7-4-81-91}, pages = {81 -- 91}, language = {ru} }