@article{SnarskiiShamoninChamonineYuskevich, author = {Snarskii, Andrei A. and Shamonin (Chamonine), Mikhail and Yuskevich, Pavel}, title = {Effect of magnetic-field-induced restructuring on the elastic properties of magnetoactive elastomers}, series = {Journal of Magnetism and Magnetic Materials}, journal = {Journal of Magnetism and Magnetic Materials}, number = {517, January}, publisher = {Elsevier}, doi = {10.1016/j.jmmm.2020.167392}, abstract = {Composite materials where magnetic micrometer-sized particles are embedded into a compliant polymer matrix are known as magnetorheological (or magnetoactive) elastomers (MAEs). They are distinguished by huge variations in their physical properties, when in a magnetic field, which is commonly attributed to the restructuring of the filler. The process of the magnetic-field-induced restructuring in a magnetorheological elastomer is interpreted as progression towards percolation. Such a physical model was previously used to explain the dependence of the magnetic permeability and dielectric permittivity of MAEs on the magnetic field strength. Based on this hypothesis, the magnetorheological effect in MAEs is considered theoretically. The theoretical approach is built upon a self-consistent effective-medium theory for the elastic properties, extended to the variable (field dependent) percolation threshold. The proposed model allows one to describe the large variations (over several orders of magnitude) of the effective elastic moduli of these composite materials, known as the giant magnetorheological (MR) and field-stiffening effects. The existence of a giant magnetic Poisson effect is predicted. The relation of the proposed model to the existing theories of the MR effect in MAEs is discussed. The results can be useful for applications of MAEs in magnetic-field-controlled vibration dampers and isolators.}, language = {en} } @article{SnarskiiPodlasovShamoninChamonine, author = {Snarskii, Andrei A. and Podlasov, Sergii and Shamonin (Chamonine), Mikhail}, title = {Isotropic inertia tensor without symmetry of mass distribution}, series = {American Journal of Physics}, volume = {89}, journal = {American Journal of Physics}, number = {10}, publisher = {AIP Publishing}, doi = {10.1119/10.0005416}, pages = {916 -- 920}, abstract = {Conventional calculations of the inertia tensor in undergraduate physics course are usually done for highly symmetrical bodies. Students might therefore get the impression that the moment of inertia about any axis through the center of mass is the same only for bodies with the highest degree of symmetry relative to this point, e.g., for spheres. A simple, seemingly counterintuitive example is presented, showing that the moment of inertia of a non-regular body, here an assembly of material points, can be the same about any axis passing through its center of mass.}, language = {en} } @article{BelyaevaKleppLemmeletal., author = {Belyaeva, Inna A. and Klepp, J{\"u}rgen and Lemmel, Hartmut and Shamonin (Chamonine), Mikhail}, title = {Feasibility of Probing the Filler Restructuring in Magnetoactive Elastomers by Ultra-Small-Angle Neutron Scattering}, series = {Applied Sciences}, volume = {11}, journal = {Applied Sciences}, number = {10}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app11104470}, pages = {1 -- 9}, abstract = {Ultra-small-angle neutron scattering (USANS) experiments are reported on isotropic magnetoactive elastomer (MAE) samples with different concentrations of micrometer-sized iron particles in the presence of an in-plane magnetic field up to 350 mT. The effect of the magnetic field on the scattering curves is observed in the scattering vector range between 2.5 x 10(-5) and 1.85 x 10(-4) angstrom(-1). It is found that the neutron scattering depends on the magnetization history (hysteresis). The relation of the observed changes to the magnetic-field-induced restructuring of the filler particles is discussed. The perspectives of employing USANS for investigations of the internal microstructure and its changes in magnetic field are considered.}, language = {en} } @article{KravanjaBelyaevaHribaretal., author = {Kravanja, Gaia and Belyaeva, Inna A. and Hribar, Luka and Drevenšek-Olenik, Irena and Shamonin (Chamonine), Mikhail and Jezeršek, Matija}, title = {Laser Micromachining of Magnetoactive Elastomers as Enabling Technology for Magnetoresponsive Surfaces}, series = {Advanced Materials Technologies}, volume = {7}, journal = {Advanced Materials Technologies}, number = {5}, publisher = {Wiley}, doi = {10.1002/admt.202101045}, pages = {1 -- 8}, abstract = {A simple method for structuring of the surface of a magnetoactive elastomer (MAE) on the tens of micrometers scale, which capabilities extend beyond conventional mold-based polymer casting, is reported. The method relies on the ablation of the material by absorption of nanosecond infrared pulses from a commercial laser. It is shown that it is possible to fabricate parallel lamellar structures with a high aspect ratio (up to 6:1) as well as structures with complex scanning trajectories. The method is fast (fabrication time for the 7 × 7 mm2 is about 60 s), and the results are highly reproducible. To illustrate the capabilities of the fabrication method, both orthogonal to the MAE surface and tilted lamellar structures are fabricated. These magnetosensitive lamellae can be easily bent by ±45° using an external magnetic field of about 230 mT. It is demonstrated that this bending allows one to control the sliding angle of water droplets in a great range between a sticky (>90°) and a sliding state (<20°). Perspectives on employing this fabrication technology for magnetosensitive smart surfaces in microfluidic devices and soft robotics are discussed.}, language = {en} } @article{KravanjaBelyaevaHribaretal., author = {Kravanja, Gaia and Belyaeva, Inna A. and Hribar, Luka and Drevenšek-Olenik, Irena and Jezeršek, Matija and Shamonin (Chamonine), Mikhail}, title = {Tunable Drop Splashing on Magnetoactive Elastomers}, series = {Advanced Materials Interfaces}, volume = {8}, journal = {Advanced Materials Interfaces}, number = {11}, publisher = {Wiley}, doi = {10.1002/admi.202100235}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-24504}, pages = {1 -- 7}, abstract = {The significant effect of an external dc magnetic field on the splashing behavior of ethanol drops impacting on the unstructured (flat) surface of soft magnetoactive elastomers (MAEs) is reported. The Weber number corresponding to the transition between the deposition and the splashing regime is reduced by ≈20\% in a moderate magnetic field of ≈300 mT. Alongside this effect, a two-fold increase of the initial deceleration of the ejection sheet is observed for the softest sample. The main underlying mechanism for the observed phenomena is believed to be the magnetic-field-induced stiffening of the MAEs. Further possible mechanisms are magnetically induced changes in the surface roughness and magnetic-field-induced plasticity (magnetic shape memory effect). The potential application areas are magnetically regulable wetting and magneto-responsive surfaces for controlling the drop splashing.}, language = {en} } @article{LovšinBrandlGlavanetal., author = {Lovšin, Matija and Brandl, Dominik and Glavan, Gašper and Belyaeva, Inna A. and Cmok, Luka and Coga, Lucija and Kalin, Mitjan and Shamonin (Chamonine), Mikhail and Drevenšek-Olenik, Irena}, title = {Reconfigurable Surface Micropatterns Based on the Magnetic Field-Induced Shape Memory Effect in Magnetoactive Elastomers}, series = {Polymers}, volume = {13}, journal = {Polymers}, number = {24}, publisher = {MDPI}, doi = {10.3390/polym13244422}, abstract = {A surface relief grating with a period of 30 mu m is embossed onto the surface of magnetoactive elastomer (MAE) samples in the presence of a moderate magnetic field of about 180 mT. The grating, which is represented as a set of parallel stripes with two different amplitude reflectivity coefficients, is detected via diffraction of a laser beam in the reflection configuration. Due to the magnetic-field-induced plasticity effect, the grating persists on the MAE surface for at least 90 h if the magnetic field remains present. When the magnetic field is removed, the diffraction efficiency vanishes in a few minutes. The described effect is much more pronounced in MAE samples with larger content of iron filler (80 wt\%) than in the samples with lower content of iron filler (70 wt\%). A simple theoretical model is proposed to describe the observed dependence of the diffraction efficiency on the applied magnetic field. Possible applications of MAEs as magnetically reconfigurable diffractive optical elements are discussed. It is proposed that the described experimental method can be used as a convenient tool for investigations of the dynamics of magnetically induced plasticity of MAEs on the micrometer scale.}, language = {en} } @article{GlavanBelyaevaRuwischetal., author = {Glavan, Gašper and Belyaeva, Inna A. and Ruwisch, Kevin and Wollschlaeger, Joachim and Shamonin (Chamonine), Mikhail}, title = {Magnetoelectric Response of Laminated Cantilevers Comprising a Magnetoactive Elastomer and a Piezoelectric Polymer, in Pulsed Uniform Magnetic Fields}, series = {Sensors}, volume = {21}, journal = {Sensors}, number = {19}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/s21196390}, pages = {1 -- 19}, abstract = {The voltage response to pulsed uniform magnetic fields and the accompanying bending deformations of laminated cantilever structures are investigated experimentally in detail. The structures comprise a magnetoactive elastomer (MAE) slab and a commercially available piezoelectric polymer multilayer. The magnetic field is applied vertically and the laminated structures are customarily fixed in the horizontal plane or, alternatively, slightly tilted upwards or downwards. Six different MAE compositions incorporating three concentrations of carbonyl iron particles (70 wt\%, 75 wt\% and 80 wt\%) and two elastomer matrices of different stiffness are used. The dependences of the generated voltage and the cantilever's deflection on the composition of the MAE layer and its thickness are obtained. The appearance of the voltage between the electrodes of a piezoelectric material upon application of a magnetic field is considered as a manifestation of the direct magnetoelectric (ME) effect in a composite laminated structure. The ME voltage response increases with the increasing total quantity of the soft-magnetic filler in the MAE layer. The relationship between the generated voltage and the cantilever's deflection is established. The highest observed peak voltage around 5.5 V is about 8.5-fold higher than previously reported values. The quasi-static ME voltage coefficient for this type of ME heterostructures is about 50 V/A in the magnetic field of approximate to 100 kA/m, obtained for the first time. The results could be useful for the development of magnetic field sensors and energy harvesting devices relying on these novel polymer composites.}, language = {en} } @article{SavelevFetisovChashinetal., author = {Savelev, Dmitrii V. and Fetisov, Leonid Y. and Chashin, Dmitri V. and Fetisov, Yuri K. and Khon, Anastasia and Shamonin (Chamonine), Mikhail}, title = {Effects of ferromagnetic-material thickness on magnetoelectric voltage transformation in a multiferroic heterostructure}, series = {Smart Materials and Structures}, volume = {30}, journal = {Smart Materials and Structures}, number = {6}, publisher = {IOP PUBLISHING}, doi = {10.1088/1361-665X/abf6c0}, abstract = {A magnetoelectric (ME) voltage transformer is fabricated on the basis of a ferromagnetic (FM)-piezoelectric (PE) heterostructure comprising two equally thick laminated layers of an amorphous FM alloy and a piezoceramic lead zirconate-titanate layer sandwiched between them. The structure, placed inside an excitation coil, is electrically poled and magnetized in the direction of the long axis. The primary voltage is applied to the coil and the secondary voltage is measured between the electrodes of the PE material. It is shown for the first time that the change in the total thickness of magnetic layers significantly influences the transformer ' s characteristics. At the largest total thickness of FM layers of 138 mu m, the open-circuit voltage transformation ratio K has a maximum value of about 20, and the power transfer efficiency eta at a matched resistive load of about 20 k omega reaches 45\%. The variation of the control magnetic field in the range of 0-21.6 kA m(-1) makes it possible to change the voltage transformation ratio K from zero to the maximum value. A simple model allows one to calculate the dependence of the characteristics of the ME transformer on the frequency of the primary voltage, thickness of the FM layers, control magnetic field, and the load.}, language = {en} } @misc{PershinaSavelevGlavanetal., author = {Pershina, K. V. and Savelev, Dmitrii V. and Glavan, Gašper and Chashin, Dmitri V. and Belyaeva, Inna A. and Fetisov, Leonid Y. and Shamonin (Chamonine), Mikhail}, title = {The voltage response of a structure comprising a magnetoactive-elastomer cylinder and a piezoelectric material to magnetic field step excitations}, series = {The 4th International Baltic Conference on Magnetism (IBCM 2021) : Svetlogorsk, Russia August 29 - September 2, 2021 : Book of Abstracts}, journal = {The 4th International Baltic Conference on Magnetism (IBCM 2021) : Svetlogorsk, Russia August 29 - September 2, 2021 : Book of Abstracts}, publisher = {Immanuel Kant Baltic Federal University, Kaliningrad, Russia}, pages = {182}, language = {en} }