@article{ChatzitakisSafarovOpferkuchetal., author = {Chatzitakis, Paris and Safarov, Javid and Opferkuch, Frank and Dawoud, Belal}, title = {Experimental investigation of an absorption heat pump with organic working pairs}, series = {Applied Thermal Engineering}, volume = {163}, journal = {Applied Thermal Engineering}, number = {December}, publisher = {Elsevier}, doi = {10.1016/j.applthermaleng.2019.114311}, abstract = {As part of a systematic approach towards the search for alternative absorption heat pump (AHP) working pairs that could potentially provide comparable performance to conventional ones, a previous work performed a detailed theoretical cycle analysis and simulation that revealed concrete correlations between key working fluid thermophysical properties and AHP performance indicators. Following this work, targeted combinations of two organic refrigerants, 2,2,2-trifluoroethanol (TFE) and 2,2,3,3,3-pentafluoropropanol (5FP) and two organic absorbents, 1,3-dimethyl-2-imidazolidinone (DMI) and 2-pyrrolidone (PYR) were tested in a prototype 5 kW AHP, based on a highly compact plate heat exchanger design, which has been previously introduced. The purpose of this effort was to test the findings of the previous work with experimental measurements. The working pair combinations were also subjected to vapor liquid equilibrium (VLE) and viscosity measurements, in order to determine reliable activity coefficient and improve the accuracy of the simulations. The experimental performance data agree well with the COP simulations and show to be consistent with the conclusions derived from the previous theoretical work.}, language = {en} } @misc{BroserFalterŁawrowskietal., author = {Broser, Christian and Falter, Thomas and Ławrowski, Robert Damian and Altenbuchner, Amelie and V{\"o}gele, Daniel and Koss, Claus and Schlamp, Matthias and Dunnweber, Jan and Steffens, Oliver and Heckner, Markus and Jaritz, Sabine and Schiegl, Thomas and Corsten, Sabine and Lauer, Norina and Guertler, Katherine and Koenig, Eric and Haug, Sonja and Huber, Dominik and Birkenmaier, Clemens and Krenkel, Lars and Wagner, Thomas and Justus, Xenia and Saßmannshausen, Sean Patrick and Kleine, Nadine and Weber, Karsten and Braun, Carina N. and Giacoppo, Giuliano and Heinrich, Michael and Just, Tobias and Schreck, Thomas and Schnabl, Andreas and Gilmore, Amador T{\´e}ran and Roeslin, Samuel and Schmid, Sandra and Wellnitz, Felix and Malz, Sebastian and Maurial, Andreas and Hauser, Florian and Mottok, J{\"u}rgen and Klettke, Meike and Scherzinger, Stefanie and St{\"o}rl, Uta and Heckner, Markus and Bazo, Alexander and Wolff, Christian and Kopper, Andreas and Westner, Markus and Pongratz, Christian and Ehrlich, Ingo and Briem, Ulrich and Hederer, Sebastian and Wagner, Marcus and Schillinger, Moritz and G{\"o}rlach, Julien and Hierl, Stefan and Siegl, Marco and Langer, Christoph and Hausladen, Matthias and Schreiner, Rupert and Haslbeck, Matthias and Kreuzer, Reinhard and Br{\"u}ckl, Oliver and Dawoud, Belal and Rabl, Hans-Peter and Gamisch, Bernd and Schmidt, Ottfried and Heberl, Michael and G{\"a}nsbauer, Bianca and Bick, Werner and Ellermeier, Andreas and Monkman, Gareth J. and Prem, Nina and Sindersberger, Dirk and Tschurtschenthaler, Karl and Aurbach, Maximilian and Dendorfer, Sebastian and Betz, Michael A. and Szecsey, Tamara and Mauerer, Wolfgang and Murr, Florian}, title = {Forschung 2018}, editor = {Baier, Wolfgang}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-9818209-5-9}, doi = {10.35096/othr/pub-1382}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-13826}, pages = {98}, subject = {Forschung}, language = {de} } @article{WeindlerLehnerEcksteinetal., author = {Weindler, Jeremy and Lehner, Hannes and Eckstein, J. and Dawoud, Belal}, title = {Performance assessment of a green hydrogen-based household energy system supported by a battery storage at different resolutions of the electrical load profile}, series = {International Journal of Hydrogen Energy}, volume = {144}, journal = {International Journal of Hydrogen Energy}, publisher = {Elsevier}, issn = {0360-3199}, doi = {10.1016/j.ijhydene.2025.04.431}, pages = {30 -- 41}, abstract = {Hydrogen deems quite suitable for medium- and long-term energy storage of surplus renewable electricity. Nowadays, all-in-one solutions consisting of an electrolyzer, a compressor, pressurized hydrogen storage tanks, a fuel cell (FC) and the necessary peripheral components are available for single family houses. This work presents a comparative assessment of the system's key performance indicators in a household system with three market available FCs with the nominal powers of 0.8, 1.4 and 7.8 kW. The design tool developed for the assessment of the hybrid energy system along with two energy management system configurations are introduced. An electrochemical and thermal model widely applied in the literature is used to model the FCs, which is validated against the available experimental data in the literature for all three FCs. The influence of the FCs' nominal power, their power dynamic operation range, the use of a battery storage with different capacities and the load profile's resolution have been technically assessed regarding the system's self-sufficiency (SS), the FC's efficiency, full-load operating hours, and number of on/off cycles. It turned out that, the system performance is strongly dependent on the nominal power of the FC and its power dynamic operation range. If no battery-storage is applied, the complete grid independence is not possible, and a high resolution of the load profile is indispensable in the assessment of the system design. A hybrid energy system comprising the 1.4 kW FC, a PV system of 10 kW peak power and a battery of 15 kW storage capacity showed a degree of SS of 98\%. The number of the full-load operating hours and on/off cycles of that FC amount to 768 and 116 cycles, respectively. Such promising results are referred to the high dynamic operation range of the battery, and its high discharge power capacity, which makes it more suitable to cover a remarkably higher fraction of the load deficit, if compared to a system without a battery.}, language = {en} } @article{WeindlerDawoud, author = {Weindler, Jeremy and Dawoud, Belal}, title = {Experimental investigation of a small-scale continuous flow ohmic heating reactor for a highly effective conversion of renewable electricity surpluses into heat}, series = {Applied Thermal Engineering}, volume = {242}, journal = {Applied Thermal Engineering}, publisher = {Elsevier}, issn = {1359-4311}, doi = {10.1016/j.applthermaleng.2024.122401}, pages = {15}, abstract = {Sector coupling is expected to play a decisive role as a key technology to realize the energy transition towards green energy supply. This work introduces, therefore, a comprehensive experimental study on a new power-to-heat system based on the continuous-flow, ohmic heating principle, which aims at utilizing renewable electricity in green processes. The ohmic heating technology, which is widely applied in the food industry, has been adapted and evaluated for delivering heat and domestic hot water to a single-family house. The introduced prototype is designed to convert renewable electricity into heat in the power range between 1000 and 3000 W with a typical electrical household installation (230 V, 50 Hz and 16 A fuse). A dedicated test rig has been developed and a comprehensive experimental campaign has been carried out to investigate the performance of the introduced system under typical operating conditions of a single-family house. Both the conversion efficiency and the dynamics of the thermal response of the introduced system have been assessed. It turned out that, the temperature lift between the return and supply of the reactor, and consequently, the conversion efficiency of electrical into thermal energy, are independent on the return temperature, for a fixed value of the volume flow rate of the electrolyte solution. A remarkable steady-state conversion efficiency of 97.5\% has been measured. In addition, the dynamic response of the ohmic heating system has been found to be strongly dependent on the desired temperature lift. By an implemented controller, 95\% of the steady state temperature lift of 44.5 K can be realized in 50 s, which marks an exceptionally rapid thermal response. The obtained results pave the way towards a field test study of the developed technology in a real household installation as well as to extend the focus on new fields such as green chemical processes.}, language = {en} }