@article{KeimMarxNonnetal., author = {Keim, Vincent and Marx, P. and Nonn, Aida and M{\"u}nstermann, Sebastian}, title = {Fluid-structure-interaction modeling of dynamic fracture propagation in pipelines transporting natural gases and CO2-mixtures}, series = {International Journal of Pressure Vessels and Piping}, volume = {175}, journal = {International Journal of Pressure Vessels and Piping}, number = {August}, publisher = {Elsevier}, doi = {10.1016/j.ijpvp.2019.103934}, abstract = {As part of current design standards, the Battelle Two-Curve Model (BTCM) is still widely used to predict and secure ductile crack arrest in gas transmission pipelines. For modern linepipe steels and rich natural gases or CO2 mixtures, the BTCM might lead to incorrect predictions. On the one hand, it suffers from the insufficient description of the individual physical processes in the pipe material and fluid itself. Furthermore, the model does not account for fluid-structure-interaction (FSI) effects during simultaneous running-ductile fracture (RDF) and mixture decompression. Numerical FSI models allow for a more sophisticated, coupled analysis of the driving forces for the failure of pipelines. This paper deals with the development of an FSI model for the coupled prediction of 3D pressure profiles acting on the inner pipe wall during crack propagation. The coupled Euler-Lagrange (CEL) method is used to link the fluid and structure models. In a Lagrange formulation, the modified Bai-Wierzbicki (MBW) model describes the plastic deformation and ductile fracture as a function of the underlying stress/strain conditions. The fluid behavior is calculated in a 3D model space by Euler equations and the GERG-2008 reference equation of state (EOS). The coupled CEL model is used to predict the RDF in small-diameter pipe sections for different fluid mixtures. The calculated 3D pressure distributions ahead and behind the running crack tip (CT) significantly differ in axial and circumferential directions depending on the mixture composition. The predicted FSI between the pipe wall and fluid decompression in 3D CEL/FSI model provides reliable knowledge about the pressure loading of the pipeline during RDF.}, subject = {Fluid-Struktur-Wechselwirkung}, language = {en} } @article{KeimNonnMuenstermann, author = {Keim, Vincent and Nonn, Aida and M{\"u}nstermann, Sebastian}, title = {Application of the modified Bai-Wierzbicki model for the prediction of ductile fracture in pipelines}, series = {International Journal of Pressure Vessels and Piping}, volume = {171}, journal = {International Journal of Pressure Vessels and Piping}, number = {March}, publisher = {Elsevier}, doi = {10.1016/j.ijpvp.2019.02.010}, pages = {104 -- 116}, abstract = {The complex mechanical and corrosive loads of modern pipeline systems transporting oil, natural gas and CO2 impose steadily increasing requirements on material properties. The majority of current design standards still limit the application of modern high toughness linepipe steels due to the simple specification of material requirements in terms of energy levels from Charpy impact or Battelle Drop-Weight-Tear (BDWT) tests. In consequence, research activities have been conducted recently aiming at developing modified or novel experimental methods for the characterization of the ductile fracture behavior. To quantify the effects of various parameters on fracture behavior and derive suitable correlations, it is necessary to accompany these activities by numerical simulations with appropriate ductile damage models. In this paper, the MBW model is applied to study the structural behavior of pipelines in ductile fracture regime. Due to its precise incorporation of the underlying load conditions, the damage model is successfully used to simulate the slant fracture behavior in Battelle Drop weight tear test specimens and pipe sections. In comparison to ductile damage models applied in former studies, namely the Gurson-Tvergaard-Needleman and Cohesive Zone model, the presented numerical methodology allows for a more detailed investigation of loading, material and geometry effects on fracture and crack arrest behavior of pipelines.}, language = {en} } @article{KeimCerroneNonn, author = {Keim, Vincent and Cerrone, Albert R. and Nonn, Aida}, title = {Using local damage models to predict fracture in additively manufactured specimens}, series = {International Journal of Fracture}, volume = {218}, journal = {International Journal of Fracture}, number = {1}, publisher = {Springer Nature}, doi = {10.1007/s10704-019-00371-z}, pages = {135 -- 147}, abstract = {This paper explores the efficacy of employing local damage models, normally applied to ductile material systems manufactured by subtractive techniques, to additively manufactured laboratory specimens. While these specimens were ductile and metallic, their additive character (i.e. porosity and surface roughness) could have had potential to activate multiple life-limiting failure paths, thus obfuscating failure prediction. Herein, two damage models are considered and compared: the micromechanical Gurson-Tvergaard-Needleman model and a Crack Band model of the strain-based, phenomenological genre. Simulations used to calibrate elastic and plastic material properties and predict damage in a novel, non-standard specimen were quasi-static, explicit. Both damage models proved capable in resolving the experimentally-observed failure path and associated loading conditions. The analyses described herein were made as part of the Third Sandia Fracture Challenge.}, language = {en} } @inproceedings{VoellingNonnSchneider, author = {V{\"o}lling, Alexander and Nonn, Aida and Schneider, Ingo}, title = {Anwendung des Koh{\"a}sivzonenmodells zur Abbildung von duktilem dynamischen Rissfortschritt in Gasfernleitungen}, series = {45. Tagung des AK Bruch, Berlin, Germany}, booktitle = {45. Tagung des AK Bruch, Berlin, Germany}, pages = {253 -- 262}, subject = {Ferngasleitung}, language = {de} } @article{BleckDahlNonnetal., author = {Bleck, Wolfgang Peter and Dahl, Winfried and Nonn, Aida and Amlung, Lars and Feldmann, Markus and Sch{\"a}fer, Dirk and Eichler, Bj{\"o}rn}, title = {Numerical and experimental analyses of damage behaviour of steel moment connection}, series = {Engineering Fracture Mechanics}, volume = {76}, journal = {Engineering Fracture Mechanics}, number = {10}, doi = {10.1016/j.engfracmech.2009.03.004}, pages = {1531 -- 1547}, abstract = {Plastic design allows the exploitation of the full resistance of steel structures by taking advantage of stress-redistributions due to plastic strains exceeding the yield strain. Especially in seismic design the utilization of material reserves and the formation of plastic hinges play an important role. In devastating earthquakes in Northridge (USA) and Kobe (Japan) brittle fracture of welded connections in steel moment frames occurred prior to formation of plastic hinges and utilization of plastic material reserves. The subsequent research works resulted in improved design rules and recommendations for these kinds of failure. But to guarantee sufficient ductile performance of these connections also in the upper shelf region, plastic and earthquake resistant design rules should take into account degradation of strain capacity and toughness properties due to quasi static and especially seismic loading. In the scope of the current European project "Plastotough", the main objective is to derive quantified toughness design rules in the upper shelf based on the strain requirements opposed to strain capacities. This paper gives an overview over the research work in performance and shows recent results from experimental and numerical analyses performed within this project for monotonic and cyclic loading.}, language = {en} } @article{KofianiNonnWierzbicki, author = {Kofiani, Kirki and Nonn, Aida and Wierzbicki, Tomasz}, title = {New calibration method for high and low triaxiality and validation on SENT specimens of API X70}, series = {International Journal of Pressure Vessels and Piping}, volume = {111-112}, journal = {International Journal of Pressure Vessels and Piping}, doi = {10.1016/j.ijpvp.2013.07.004}, pages = {187 -- 201}, abstract = {The determination of the exact mechanical properties of material is essential for an optimal and safe design of linepipes. It is especially important for the prevention of over-engineering and the reliable assessment of complex accidental loading, such as extreme bending due to loss of buoyancy of support, or abrupt ground movement. Currently, the focus of research in offshore deepwater installations and linepipes is towards pre-cracked structures with high triaxiality stress states and complex loading histories. At the same time, low triaxiality stress states must be correctly studied in order to represent shear dominated failure in pipes. A comprehensive experimental and numerical program was undertaken to determine the mechanical properties of the traditional API X70 grade of steel. The material was characterized for anisotropic plasticity, fracture initiation and uncracked ductility for various states of stress. The same material was also used for pre-cracked fracture toughness assessment. The experimental program included flat and round specimens. The first type of tests on flat butterfly-shaped, central hole, notched and circular disk specimens; were selected to address the low stress triaxiality range. Tests on round notched bar specimens and SENT fracture mechanics tests extended the characterization and verification process to higher stress triaxiality values. This program covered a wide range of stress conditions and demonstrated their effect on the material resistance to crack extension. Each test conducted was numerically simulated using solid finite element models, matching the exact geometric and loading history features. The numerical simulation provided information on the local stress and strain fields around the location of the potential or existing cracks. Based on the above hybrid experimental/numerical technique tailored for pipe applications, the MMC fracture model was calibrated. The model relates the material ductility not only to stress triaxiality but also to the Lode parameter. The predictive capabilities of the MMC were then evaluated in the case of SENT testing, used extensively in the pipeline industry. It was shown that the present fracture model calibration can describe fracture behavior of SENT experiments.}, language = {en} } @article{KeimParedesNonnetal., author = {Keim, Vincent and Paredes, Marcelo and Nonn, Aida and M{\"u}nstermann, Sebastian}, title = {FSI-simulation of ductile fracture propagation and arrest in pipelines}, series = {International Journal of Pressure Vessels and Piping}, volume = {182}, journal = {International Journal of Pressure Vessels and Piping}, number = {May}, publisher = {Elsevier}, doi = {10.1016/j.ijpvp.2020.104067}, abstract = {The fracture propagation and arrest control for pipelines transporting rich natural gases and high vapor pressure liquids is based on the Battelle Two-Curve Model (BTCM). Distinct limitations of this model were demonstrated for past and modern steels and gas mixtures. These can be related to the insufficient description of individual physical processes and interactions between the pipe material and transported mixture during the running ductile fracture. In the past, fluid-structure interaction (FSI) models enabled a more sophisticated, coupled analysis of the failure scenario. To quantify their capability of describing the multi-physical processes, the FSI models need to be verified by experimental data from full-scale burst tests (FSBT). Therefore, this paper deals with the simulation of five FSBTs from the literature on API grade X65 pipes with different pipe geometries, mixtures and initial conditions. The FSI is modeled by the coupled Euler-Lagrange (CEL) method. The modified Mohr-Coulomb (MMC) model is implemented in the CEL framework to describe the deformation and ductile fracture in the X65/L450 pipes. 3D Euler equations are used to calculate the mixture decompression with the GERG-2008 equation of state defining the volumetric behavior of a CO2-rich mixture, CH4 and H2. The extended model considers the effect of soil backfill on the pipe deformation and inertia. The numerical predictions agree well with the experimental findings in terms of the crack propagation speed and arrest length underlining the capability of the developed numerical tool.}, subject = {Bruchmechanik}, language = {en} } @article{NonnDahlBleck, author = {Nonn, Aida and Dahl, Winfried and Bleck, Wolfgang Peter}, title = {Numerical modelling of damage behaviour of laser-hybrid welds}, series = {Engineering Fracture Mechanics}, volume = {75}, journal = {Engineering Fracture Mechanics}, doi = {10.1016/j.engfracmech.2007.10.015}, pages = {3251 -- 3263}, abstract = {The effect of laser-hybrid welds on deformation and failure behaviour of fracture mechanics specimens is investigated in order to provide quantitative prediction of damage tolerance and residual strength. The simulation of crack initiation and crack extension in hybrid welds is performed by applying GTN damage model. The identification of damage parameters requires combined numerical and experimental analyses. The tendency to crack path deviation during crack growth depends strongly on the constraint development at the interface between base and weld metal. In order to quantify the influence of local stress state on the crack path deviation, the initial crack location is varied. Finally, the results from fracture mechanics tests are compared to real component, beam-column-connection, with respect to fracture resistance.}, language = {en} } @inproceedings{NonnCerroneStallybrassetal., author = {Nonn, Aida and Cerrone, Albert R. and Stallybrass, C. and Meuser, H.}, title = {Microstructure-based modeling of high-strength linepipe steels}, series = {6th Pipeline Technology Conference 2013, 6-9 October, Ostend, Belgium}, booktitle = {6th Pipeline Technology Conference 2013, 6-9 October, Ostend, Belgium}, doi = {10.13140/2.1.2797.4404}, abstract = {HE MODERN LONGITUDINALLY WELDED pipes with new generation of steel materials exhibit excellent mechanical properties due to the continuous improvements in thermomechanical controlled processing of plates (TMCP) and pipe (UOE) production processes. While the adjustment of process parameters allows for optimized design of microstructure, safe installation and operation of these pipes for long distance, gas transmission pipelines require a detailed knowledge and characterization of their deformation and fracture performance for specific application. Although the influence of texture on the material properties can be qualitatively estimated, a quantitative link between the microstructural constituents and mechanical behavior is still missing. This paper aims to present the procedure for the development of microstructure-based model to quantitatively describe the mechanical behavior of bainitic X80 pipeline steel. In the first step, the metallographic analysis is conducted to identify the microstructural characteristics, such as volume fractions of microstructure constituents (granular and lower bainite, M-A phase) and their distributions. The strength properties in terms of flow curves are determined by tensile tests on mini-flat and round bar specimens with different sizes. Subsequently, a 2D three-phase model is developed based on the results from the quantitative analyses of microstructure with each phase modeled using the von-Mises plasticity theory. The flow curves of single phases are estimated by considering experimental findings, the chemical composition and microstructural description of each phase. This 2D FE model is then applied to predict ielding and hardening behavior. In addition to the 2D three-phase model, a 3D two-phase model is developed for the purposes of exploring the viability of using a spectral solver to analyze X80 synthetic microstructures. Here, the FFT-based approach is compared against the crystal-plastic finite-element method. The results contribute to a better understanding of the mechanical behavior and allow a more precise microstructure design of the bainitic steels.}, language = {en} } @inproceedings{NonnKalwa, author = {Nonn, Aida and Kalwa, Christoph}, title = {Analysis of dynamic ductile fracture propagation in pipeline steels}, series = {6th Pipeline Technology Conference (2013), Ostend, Belgium}, booktitle = {6th Pipeline Technology Conference (2013), Ostend, Belgium}, doi = {10.13140/2.1.4370.3046}, abstract = {Analysis of dynamic ductile fracture propagation in pipeline steels: a damage-T IS A WELL-ESTABLISHED fact that the successful application of new generation of high-strength steel grades for long-distance gas transmission depends strongly on full understanding and appropriate characterization of fracture resistance. A damage mechanics approach has found to be a very promising tool in supporting the experimental characterization of ductile fracture propagation. The major advantage of this approach lies in the consideration of the influence of local stress and strain variables on the damage evolution and thus its capability to describe the fracture resistance of the pipelines with different stress triaxiality level by using the same set of parameters. However, the wider application of this approach has been limited due to the issues such as reliable determination of input parameters and required material properties, mesh size dependence, etc.. The objective of this paper is to characterize dynamic ductile fracture resistance of X65 and X80 pipeline materials and to demonstrate the potential of damage mechanics approach for the simulation of dynamic fracture propagation by using two damage models: (1) Cohesive Zone (CZ) model and (2) Gurson-Tvergaard-Needleman (GTN) model. In the first step, results from quasi-static and dynamic tensile tests are used to describe plasticity in terms of flow curves. The calibration of input parameters for both models is performed by using the load-deformation curves from quasi-static tests on non-standard drop-weight tear (DWT) specimens with pre-fatigued crack. b. In the next step, estimated damage model parameters are verified by means of the dynamic tests on the pressed and Chevron notch DWT specimens. Different amounts of crack growth are established by varying the drop height. The experimental fracture resistance is quantified in terms of J-integral at specific crack length. The numerical results are evaluated with respect to global load-deformation and fracture resistance behavior. Furthermore, damage simulations are applied for quantification of local stress conditions in order to identify the major factors controlling the crack propagation. The results reported here serve as a basis for better understanding of fracture performance in dependences of geometry and material properties.}, language = {en} } @inproceedings{NonnKalwa, author = {Nonn, Aida and Kalwa, Christoph}, title = {Failure modeling of pipeline X100 Material in temperature transition region}, series = {22nd International Society of Offshore and Polar Engineering 2012 (ISOPE 2012), Rhodes, Greece}, booktitle = {22nd International Society of Offshore and Polar Engineering 2012 (ISOPE 2012), Rhodes, Greece}, abstract = {This paper focuses on the characterization of the fracture performance of X100 material in transition temperature region using both experimental and numerical methods. The ductile fracture has been analyzed using tests on round notched bar specimens and standard fracture mechanics tests performed at room temperature. In previous publications the damage model Gurson-Tvergaard-Needleman (GTN) has been applied and verified by existing experimental data to describe ductile fracture behavior. The brittle fracture and the fracture in temperature transition region have been studied by means of deep and shallow notched SENB specimens at two different temperatures T=- 80°C and -40°C. Besides elastic-plastic analyses to quantify constraint levels for different initial crack configurations at the onset of cleavage fracture, the brittle failure has been described using modified Beremin model. The influence of the stable crack growth on the cleavage failure probability in temperature transition region has been captured by coupling the ductile fracture model (GTN) with the modified Beremin model. Finally, examples have been presented for the practical application of the numerical results on the fracture assessment of the flawed high-strength pipelines.}, language = {en} } @inproceedings{NonnKalwa, author = {Nonn, Aida and Kalwa, Christoph}, title = {The effect of microstructure, strain hardening and strain rate on the fracture behavior of high strength pipeline steels}, series = {2nd International Conference on Material Modelling (ICMM2), 31th August - 2nd September, 2011 at Mines Paris Tech, France}, booktitle = {2nd International Conference on Material Modelling (ICMM2), 31th August - 2nd September, 2011 at Mines Paris Tech, France}, language = {en} } @inproceedings{NonnVoelling, author = {Nonn, Aida and V{\"o}lling, Alexander}, title = {Lokale Spannungsanalyse bei Rissinitiierung}, series = {4. Workshop Kompetenzverbund Kerntechnik "Komponentensicherheit und Werkstoffverhalten", MPA Stuttgart, Germany}, booktitle = {4. Workshop Kompetenzverbund Kerntechnik "Komponentensicherheit und Werkstoffverhalten", MPA Stuttgart, Germany}, subject = {Rissverhalten}, language = {en} } @inproceedings{NonnKalwa, author = {Nonn, Aida and Kalwa, Christoph}, title = {Application of probabilistic fracture mechanics for safety assessment of longitudinally welded linepipes}, series = {6th Pipeline Technology Conference (2013), Ostend, Belgium}, booktitle = {6th Pipeline Technology Conference (2013), Ostend, Belgium}, language = {en} } @inproceedings{NonnKalwa, author = {Nonn, Aida and Kalwa, Christoph}, title = {Application of damage mechanics approach for crack propagation in pipeline}, series = {19th Biennial Joint Technical Meeting (JTM) on Pipeline Research, April 29 - May 3, 2013, Sydney, Australia}, booktitle = {19th Biennial Joint Technical Meeting (JTM) on Pipeline Research, April 29 - May 3, 2013, Sydney, Australia}, language = {en} } @inproceedings{NonnErdelenPepplerWesseletal., author = {Nonn, Aida and Erdelen-Peppler, Marion and Wessel, Waldemar and Mahn, Denise}, title = {How reliable are the current testing procedures for the safety assurance against crack propagation in seamless gas pipelines}, series = {Proceedings of the ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering (OMAE2014), Volume 4A: Structures, Safety and Reliability, June 8-13, 2014, San Francisco, USA}, booktitle = {Proceedings of the ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering (OMAE2014), Volume 4A: Structures, Safety and Reliability, June 8-13, 2014, San Francisco, USA}, doi = {10.13140/2.1.3190.6567}, abstract = {The worldwide growing energy demand with the exploration of new gas fields has promoted the development of high toughness seamless pipeline steels which should sustain the increasing demands resulting from the complex loading situations. One of the most important prerequisites for safe installation and operation of long distance gas transmission pipelines is the detailed knowledge and characterization of their fracture performance for specific applications. However, recent industry experience has revealed concerns related to the limitations and reliability of current test methods for brittle-to-ductile transition evaluation. Regarding the transition temperature evaluation, the critical issues involve Drop-Weight Tear Testing (DWTT) and full-scale West-Jefferson (WJ) test applied to the smaller pipes with diameter less than 500mm. The DWTT leads frequently to invalid results in terms of abnormal fracture appearance and inverse fracture occurrence. It is still not clear if this behavior is only owed to a testing effect, which material characteristics cause it and how far it reflects the full-scale behavior. Similar observations were made for the West-Jefferson tests, which could not be assessed in the standard manner either. Again, the question was towards testing effects and the behavior of the pipeline transporting gaseous media remains unanswered. Therefore, this paper aims at identifying open questions on basis of a literature study and own experimental results and showing possible ways forward in demonstrating safety in design against propagating fracture.}, language = {en} } @inproceedings{NonnWesselSchmidt, author = {Nonn, Aida and Wessel, Waldemar and Schmidt, Tanja}, title = {Application of finite element analysis for assessment of fracture behavior of modern high toughness seamless pipeline steels}, series = {23rd International Society of Offshore and Polar Engineering 2013 (ISOPE 2013), Anchorage, USA}, booktitle = {23rd International Society of Offshore and Polar Engineering 2013 (ISOPE 2013), Anchorage, USA}, doi = {10.13140/2.1.4239.2322}, abstract = {Fracture behavior of seamless pipeline material X65Q acc. to API 5L has been studied both experimentally and numerically at different loading conditions (quasi-static vs. dynamic) and temperatures. The recent findings have shown difficulties in applying well established methods for determination of transition behavior or prediction of ductile crack arrest for the new generation of high-toughness steels. The irregular fracture performance (e.g. so-called "abnormal inverse fracture" appearance, significant scattering in ductile-to-brittle-transition-temperature region, etc.) suggests that the influence of pipe dimensions, loading parameters, crack initiation resistance as well as testing procedure on the fracture behavior has been neither understood nor properly described. This work aims to shed light on these questions regarding the applicability of conventional methods and to better illuminate most relevant parameters affecting fracture behavior of high toughness steels. To achieve this goal, experimental data basis for analysis of fracture behavior in transition and upper shelf regime has been established by conducting quasi-static fracture mechanics tests and dynamic tests on Battelle Drop Weight Tear (BDWT or DWT) specimens at different temperatures. The evaluation of obtained test results in upper shelf has been additionally complemented by numerical simulation of damage behavior. The results highlight the influence of stress conditions on fracture behavior with reference to pipe dimensions and loading conditions and, subsequently, may be used as a basis for revision of existing design methods.}, subject = {Rissfortschritt}, language = {en} } @inproceedings{NonnBrauer, author = {Nonn, Aida and Brauer, Holger}, title = {Establishing the correlation between impact energies for different sized specimens using damage models}, series = {Proceedings of the 10th International Pipeline Conference 2014 (IPC2014), September 29 - October 3, 2014, Calgary, Alberta, Canada, Vol. 3: Materials and joining, risk and reliability}, booktitle = {Proceedings of the 10th International Pipeline Conference 2014 (IPC2014), September 29 - October 3, 2014, Calgary, Alberta, Canada, Vol. 3: Materials and joining, risk and reliability}, doi = {10.1115/IPC2014-33164}, abstract = {The safety assessment of flawed pressurized pipes requires the knowledge of toughness properties which are usually provided in terms of impact energy from standard full-sized CVN notch specimens. For pipes with wall thickness less than 10mm different Charpy standards allow for the application of sub-sized specimens. However, it is still not fully clear how the impact energy from sub-sized specimens can be used to evaluate the fracture resistance of the pipes and how this energy correlates to the one from the full-sized specimen. Although different empirical correlations between sub-sized and full-sized specimens exist in the literature their validity is questionable since they are based on the results for older generation of steels. In the recent years the application of damage mechanics models has been promoted to assess the fracture behavior and deformation capacity of pipelines. The main advantage of these models can be found in their capability to link the damage evolution and the underlying stress/strain condition. In this paper damage mechanics approach is applied to describe fracture behavior of X65 pipeline material. Within the damage mechanics approach, Gurson-Tvergaard-Needleman (GTN) model is considered to be adequate for the simulation of ductile fracture. For brittle fracture, GTN model is extended by a propagation criterion which examines if the cleavage fracture stress is reached by the maximal principal stresses. The model parameters are calibrated and verified by means of load-displacement curves obtained from instrumented impact tests on different sized CVN specimens. This damage model is subsequently employed to simulate ductile-brittle transition behavior.}, language = {en} } @inproceedings{NonnParedesKeimetal., author = {Nonn, Aida and Paredes, Marcelo and Keim, Vincent and Wierzbicki, Tomasz}, title = {Comparison of Fracture Models to Quantify the Effects of Material Plasticity on the Ductile Fracture Propagation in Pipelines}, series = {Proceedings of the 2018 12th International Pipeline Conference, Volume 3: Operations, Monitoring, and Maintenance, Materials and Joining, September 24-28, 2018, Calgary, Alberta, Canada}, booktitle = {Proceedings of the 2018 12th International Pipeline Conference, Volume 3: Operations, Monitoring, and Maintenance, Materials and Joining, September 24-28, 2018, Calgary, Alberta, Canada}, doi = {10.1115/IPC2018-78366}, abstract = {Various numerical approaches have been developed in the last years aimed to simulate the ductile fracture propagation in pipelines transporting CO2 or natural gas. However, a reliable quantification of the influence of material plasticity on the fracture resistance is still missing. Therefore, more accurate description of the material plasticity on the ductile fracture propagation is required based on a suitable numerical methodology. In this study, different plasticity and fracture models are compared regarding the ductile fracture propagation in X100 pipeline steel with the objective to quantify the influence of plasticity parameters on the fracture resistance. The plastic behavior of the investigated material is considered by the quadratic yield surface in conjunction with a non-associated quadratic plastic flow potential. The strain hardening can be appropriately described by the mixed Swift-Voce law. The simulations of ductile fracture are conducted by an uncoupled, modified Mohr-Coulomb (MMC) and the micromechanically based Gurson-Tvergaard-Needleman (GTN) models. In contract to the original GTN model, the MMC model is capable of describing ductile failure over wide range of stress states. Thus, ductile fracture resistance can be estimated for various load and fracture scenarios. Both models are used for the simulation of fracture propagation in DWTT and 3D pressurized pipe sections. The results from the present work can serve as a basis for establishing the correlation between plasticity parameters and ductile fracture propagation.}, language = {en} } @inproceedings{NonnErdelenPepplerWesseletal., author = {Nonn, Aida and Erdelen-Peppler, Marion and Wessel, Waldemar and Harksen, Silke and Mahn, Denise}, title = {How to assure fracture-propagation control for seamless gas pipelines?}, series = {Proceedings of the 2014 10th International Pipeline Conference (IPC2014), Volume 3: Operations, Monitoring, and Maintenance, Materials and Joining, September 29-October 3, 2014, Calgary, Canada}, booktitle = {Proceedings of the 2014 10th International Pipeline Conference (IPC2014), Volume 3: Operations, Monitoring, and Maintenance, Materials and Joining, September 29-October 3, 2014, Calgary, Canada}, doi = {10.1115/IPC2014-33169}, abstract = {Fracture propagation control in gas transmission gas pipelines belongs to the major design requirements for safe operation at high internal pressures. However, the current tests such as Drop-Weight-Tear Test (DWTT) and full-scale West-Jefferson (WJ) test reach the limits of their applicability with respect to transition temperature evaluation for seamless quenched and tempered small diameter pipes reflecting nowadays alloying concepts related to mechanical properties. Hereby, different geometry and material effects are evident which might lead to misinterpretation and unreliability of testing results. This paper aims to discuss open issues addressed in the literature and in own experimental findings with respect to reliability and transferability of testing methods, fracture parameters and their representativeness of seamless quenched and tempered pipeline behavior. By applying damage mechanics approach, it is possible to quantify the prevailing stress state and thus to understand the mechanisms controlling specific fracture appearance (ductile or brittle). Furthermore, studies were performed with objective to quantify the effect of different parameters (geometry, material and loading) on the fracture performance of the pipeline. The results from these investigations will serve as a basis for a safe pipeline design against propagating fracture.}, language = {en} } @inproceedings{NonnParedesNordhagenetal., author = {Nonn, Aida and Paredes, Marcelo and Nordhagen, H. O. and Munkejord, S. T. and Wierzbicki, Tomasz}, title = {Challenges in fluid-structure modeling of crack propagation and arrest in modern steel pipelines}, series = {14th International Congress on Fracture (ICF14), 18-23 June 2017, Rhodes, Greece}, booktitle = {14th International Congress on Fracture (ICF14), 18-23 June 2017, Rhodes, Greece}, pages = {1351 -- 1352}, language = {en} }