@misc{DuesbergBachmannEdleretal., author = {D{\"u}sberg, Felix and Bachmann, Michael and Edler, Simon and Pahlke, Andreas and Langer, Christoph and Prommesberger, Christian and Schreiner, Rupert and Bunert, Erik and Wendt, Cornelius and Zimmermann, Stefan}, title = {Novel Non-Radiative Electron Source}, series = {43rd International Symposium of Capillary Chromatography \& 16h GC x GC Symposium 2019}, journal = {43rd International Symposium of Capillary Chromatography \& 16h GC x GC Symposium 2019}, abstract = {Recently a non-radioactive electron capture detector based on a thermionic electron emitter has been demonstrated [1]. Using field emitter arrays (FEAs) would yield non-radioactive portable low power devices with fast switching capability. By combining FEAs with a vacuum-sealed housing and an electron transparent membrane window, such electron sources can be operated in an ambient pressure environment.}, language = {en} } @article{LangerPrommesbergerŁawrowskietal., author = {Langer, Christoph and Prommesberger, Christian and Ławrowski, Robert Damian and Schreiner, Rupert and Serbun, Pavel and M{\"u}ller, G{\"u}nter and D{\"u}sberg, Felix and Hofmann, Martin and Bachmann, Michael and Pahlke, Andreas}, title = {Field emission properties of p-type black silicon on pillar structures}, series = {Journal of Vacuum Science \& Technology B}, volume = {34}, journal = {Journal of Vacuum Science \& Technology B}, number = {2}, doi = {10.1116/1.4943919}, abstract = {Arrays of black silicon field emission pillar structures were fabricated on p-type silicon substrates. Two types of samples with the same number of pillars (arrays of 10 × 10) but different pillar heights (8 and 20 μm) were prepared as well as a black silicon reference sample without pillars. The field emission properties of these cathodes were investigated both by means of integral current-voltage measurements and by field emission scanning microscopy. Samples with a pillar height of 20 μm revealed onset fields as low as 6.4 V/μm, field enhancement factors up to 800, and emission currents up to 8 μA at an applied field of 20 V/μm. Due to the p-type material, a saturation of the emission current for fields above 11 V/μm was observed. This saturation leads to a stable operation with a current fluctuation of less than ±8\%. It was found that samples with a pillar height of 20 μm showed improved emission characteristics compared to samples with a pillar height of 8 μm or without pillars. The voltage maps revealed an increased emission homogeneity after a "burn-in" sequence of the sample. The current map showed that a few of the pillars dominate the emission. Integral current stability measurements were performed under different vacuum pressures, in order to investigate altered emission behavior and a potential degradation of the emitters. At pressures above 10-6 mbar, the sample starts to degrade irreversibly. Nevertheless, even after a harsh treatment over 30 min at 5 × 10-5 mbar and at an applied field of 23 V/μm, the cathode was still operating, and did not fail during further operation over 20 h at 5 × 10-8 mbar and at an applied field of 28 V/μm.}, language = {en} } @article{MingelsPorshynPrommesbergeretal., author = {Mingels, Stephan and Porshyn, Vitali and Prommesberger, Christian and Langer, Christoph and Schreiner, Rupert and L{\"u}tzenkirchen-Hecht, Dirk and M{\"u}ller, G{\"u}nter}, title = {Photosensitivity of p-type black Si field emitter arrays}, series = {Journal of Applied Physics}, volume = {119}, journal = {Journal of Applied Physics}, number = {16}, doi = {10.1063/1.4948328}, abstract = {We have investigated the properties of black Si field emitter arrays under strong electric fields and laser illumination. A low onset field of 1.8 MV/m for an emission current of 1 nA was obtained. A pronounced saturation region of the dark and photo-enhanced current was observed, which provided a short-term stability of 0.1\% at 0.4 μA and 0.7\% at 1.0 μA, respectively. As maximum value for the photosensitivity, an on-off current switching ratio of 43 reaching about 13 μA was achieved at a laser power of 15 mW. Electron spectra in the dark and under laser illumination are presented, showing a current and light-sensitive voltage drop across the emitters as well as hints for hot electron emission.}, language = {en} } @article{BachmannDamsDuesbergetal., author = {Bachmann, Michael and Dams, Florian and D{\"u}sberg, Felix and Hofmann, Martin and Pahlke, Andreas and Langer, Christoph and Ławrowski, Robert Damian and Prommesberger, Christian and Schreiner, Rupert and Serbun, Pavel and L{\"u}tzenkirchen-Hecht, Dirk and M{\"u}ller, G{\"u}nter}, title = {Extraction of the characteristics of current-limiting elements from field emission measurement data}, series = {Journal of Vacuum Science \& Technology B}, volume = {35}, journal = {Journal of Vacuum Science \& Technology B}, number = {2}, doi = {10.1116/1.4971768}, abstract = {In this contribution, the authors will present an algorithm to extract the characteristics of nonideal field emission circuit elements from saturation-limited field emission measurement data. The method for calculating the voltage drop on current-limiting circuit elements is based on circuit theory as well as Newton's method. Since the only assumption the authors make on the current-limiting circuit is a connection in series, this method is applicable to most field emission data showing saturation. To be able to determine the significance of any parameter output, the uncertainties of data and extracted parameters as well as the parameter correlations are fully taken into account throughout the algorithm. N-type silicon samples with varying external serial resistors are analyzed. All results show a good agreement to the nominal resistor values. Additionally, several p-type samples are analyzed, showing a diodelike behavior. The extracted current-limiting characteristics of the p-type samples are in good agreement with a pn-junction model. The stability of the emission current of the p-type samples is measured by constant voltage measurements and compared to the extracted current-limiting characteristics. The application of the algorithm to measurement data shows that the given algorithm is a valuable tool to analyze field emission measurement data influenced by nonemissive processes.}, language = {en} } @article{PrommesbergerBachmannDuesbergetal., author = {Prommesberger, Christian and Bachmann, Michael and D{\"u}sberg, Felix and Langer, Christoph and Ławrowski, Robert Damian and Hofmann, Martin and Pahlke, Andreas and Schreiner, Rupert}, title = {Regulation of the Transmitted Electron Flux in a Field-Emission Electron Source Demonstrated on Si Nanowhisker Cathodes}, series = {IEEE Transactions on Electron Devices}, volume = {64}, journal = {IEEE Transactions on Electron Devices}, number = {12}, publisher = {IEEE}, issn = {5128-5133}, doi = {10.1109/TED.2017.2763239}, abstract = {We report on a method to stabilize the transmitted electron flux in a field-emission electron source using an external regulation circuit. The electron source was realized with an array of silicon (Si) nanowhiskers on the top of elongated pillar structures, a mica spacer, and an extraction grid made of Si. As for most applications, the emitted electron current from the cathode is not as crucial as the transmitted electron flux through the extraction grid toward the anode. We investigated a method which allows the regulation directly by the emitted electron flux and not merely on the cathode current. By using this method, we were able to stabilize the emitted electron flux of our electron source down to values below 1\%. Simultaneously, it was shown that there is the possibility to stabilize the influencing value in the real application as well. The effectiveness of this method was demonstrated successfully with an X-ray source setup. The measured X-ray photon count rate was stabilized to a standard deviation of 0.30\% at a pressure of 1 × 10 -7 mbar. Even in harsh environment of 2 × 10 -5 mbar, a stabilization of the X-ray photon count rate down to a value of 0.63\% was achieved.}, language = {en} } @inproceedings{LindnerBerndtJungbaueretal., author = {Lindner, Matthias and Berndt, Dominik and Jungbauer, Bastian and Ehrlich, Ingo and Schreiner, Rupert and Pipa, Andrei V. and Hink, R{\"u}diger and Foest, R{\"u}diger and Brandenburg, Ronny and Max, Alexander and Caspari, Ralf}, title = {Fabrication, surface integration and testing of miniaturized dielectric barrier discharge plasma actuators for active flow control applications}, series = {AIAA Aviation 2019 Forum, 17-21 June 2019, Dallas, Texas}, booktitle = {AIAA Aviation 2019 Forum, 17-21 June 2019, Dallas, Texas}, doi = {10.2514/6.2019-2998}, language = {en} } @inproceedings{LindnerBerndtTschurtschenthaletal., author = {Lindner, Matthias and Berndt, Dominik and Tschurtschenthal, Karl and Ehrlich, Ingo and Jungbauer, Bastian and Schreiner, Rupert and Pipa, Andrei V. and Hink, R{\"u}diger and Foest, R{\"u}diger and Brandenburg, Ronny and Neuwirth, Daniel and Karpen, Norbert and Bonaccurso, Elmar and Weichwald, Robert and Max, Alexander and Caspari, Ralf}, title = {Aircraft Icing Mitigation by DBD-based Micro Plasma Actuators}, series = {AIAA AVIATION 2020 FORUM: June 15-19, 2020}, booktitle = {AIAA AVIATION 2020 FORUM: June 15-19, 2020}, doi = {10.2514/6.2020-3243}, abstract = {We present the application of plasma actuators as a technology for ice prevention at airfoils. The miniaturized dielectric barrier discharge (DBD) plasma actuators (PA) were fabricated by means of microelectromechanical systems (MEMS). We elucidate how to make the actuator samples scalable and applicable to any desired shape by the use of flexible inorganic zirconia substrates. For this purpose, we applied our developed embedding method to integrate the micro actuators in modern carbon/glass fiber reinforced polymer (CFRP/GFRP) materials. Next, the embedded actuator samples were mounted on a mechanical air profile-like fixture and placed in the icing wind tunnel iCORE. The samples were tested in rime ice conditions at temperatures of -15 to -20° C and air speeds up to 30 m/s. Unlike other groups we used a thin film zirconia substrate as dielectric for the plasma actuator. Due to the low substrate thickness of just 150 µm, an operating voltage of 2 kVRMS is already sufficient enough for a stable plasma formation. The experiments show that the operated actuator was able to prevent the ice formation and first indications of a De-icing function were also found. Hence, we show that it is feasible to realize an anti-icing system with zirconia-based plasma actuators operated at lower voltages compared to conventional ones.}, language = {en} } @article{HerrmannBuettner, author = {Herrmann, Frank and B{\"u}ttner, Simon}, title = {Automatische Qualit{\"a}tskontrolle mittels Maschinellem Lernen und SAP Leonardo}, series = {Anwendungen und Konzepte der Wirtschaftsinformatik}, journal = {Anwendungen und Konzepte der Wirtschaftsinformatik}, number = {10}, publisher = {AKWI}, issn = {2296-4592}, pages = {46 -- 53}, abstract = {In vielen Unternehmen werden von Menschen durch Ansehen von Produkten Produktionsfehler identifiziert. Die {\"u}bersehenen Produktionsfehler f{\"u}hren zunehmend h{\"a}ufiger zu teuren Kundenreklamationen. F{\"u}r die Produktion von Fußb{\"a}llen wird in dieser Arbeit diese manuelle Qualit{\"a}tssicherung analysiert. Als Alternative werden die Fußb{\"a}lle durch einen Roboter fotografiert u nd durch maschinelles Lernen werden Produktionsfehler auf diesen digitalen Fotos identifiziert. Dieser Pr{\"u}fprozess wird in SAP Leonardo implementiert und damit wird der bereits in einem SAP System implementierte Produktionsprozess (bzw. Unternehmensprozess) erweitert, wodurch ein durchg{\"a}ngig digitalisierter Gesamtprozess implementiert wird. Dadurch werden signifikant bessere Pr{\"u}fergebnisse erreichtb und die Durchlaufzeit des Pr{\"u}fprozesses wird substantiell reduziert.}, language = {de} } @article{PrommesbergerLangerŁawrowskietal., author = {Prommesberger, Christian and Langer, Christoph and Ławrowski, Robert Damian and Schreiner, Rupert}, title = {Investigations on the long-term performance of gated p-type silicon tip arrays with reproducible and stable field emission behavior}, series = {Journal of Vacuum Science \& Technology B}, volume = {35}, journal = {Journal of Vacuum Science \& Technology B}, number = {1}, doi = {10.1116/1.4972519}, abstract = {The authors report on the fabrication and characterization of p-type Si tip arrays with an integrated gate electrode for applications as field emission electron sources. After the reactive ion etching of the emitters, the combined thermal dry and wet oxidation was used for both the sharpening of the emitters and for the realization of an enhanced insulation layer. Au was evaporated in a self-aligned process as gate electrode. Arrays of 16 Si tips were fabricated with tip heights of about 3 μm and tip radii of about 20 nm with integrated gate electrode concentrically positioned ≈2 μm below the tip apex. Integral measurements with an additional anode showed improved field emission properties with a reproducible and stable emission behavior. A fast activation of the tips, low onset voltages of about 30 V, and moderate field emission currents up to 0.55 μA were noticed. The field emission parameters were calculated using the Fowler-Nordheim characteristics. A pronounced saturation regime was observed, and current fluctuations of less than ±1\% were investigated for 30 min. Long-term measurements were carried out for a period of more than 8 h. In the first 6 h of operation, the authors observed a drift of the emission current from 0.35 to 0.55 μA caused by an increased emission surface.}, language = {en} } @article{BreuerBachmannDuesbergetal., author = {Breuer, Janis and Bachmann, Michael and D{\"u}sberg, Felix and Pahlke, Andreas and Edler, Simon and Langer, Christoph and Prommesberger, Christian and Ławrowski, Robert Damian and Schreiner, Rupert and Serbun, Pavel and L{\"u}tzenkirchen-Hecht, Dirk}, title = {Extraction of the current distribution out of saturated integral measurement data of p-type silicon field emitter arrays}, series = {Journal of Vacuum Science and Technology B}, volume = {36}, journal = {Journal of Vacuum Science and Technology B}, number = {5}, publisher = {AIP Publishing}, doi = {10.1116/1.5035189}, abstract = {At the moment, only complicated techniques are known for the determination of array properties of field emitter arrays such as the number of active tips, the current distribution, or the individual tip radii. In this work, a method for extracting these parameters from integral measurement data is presented. A model describing the characteristics of a single emitter, including the saturation as a function of the applied voltage and the emitter radius, is developed. It is shown that experimental data of field emitter arrays can be represented as the sum of these functions and the characteristic parameters can be fitted to field emission data of an array. Using this method, the values of the radii as well as the parameters of distribution models can be determined directly. Analysis of experimental data from p-type Si emitter arrays shows that only 1-2\% of the tips contribute significantly.}, language = {en} } @article{EdlerBachmannBreueretal., author = {Edler, Simon and Bachmann, Michael and Breuer, Janis and Dams, Florian and D{\"u}sberg, Felix and Hofmann, Martin and Jakšič, Jasna and Pahlke, Andreas and Langer, Christoph and Ławrowski, Robert Damian and Prommesberger, Christian and Schreiner, Rupert}, title = {Influence of adsorbates on the performance of a field emitter array in a high voltage triode setup}, series = {Journal of Applied Physics}, volume = {122}, journal = {Journal of Applied Physics}, doi = {10.1063/1.4987134}, abstract = {In the present work, black-silicon field emitter arrays (FEAs) are investigated regarding the influence of residual gas pressure on the characteristics and lifetime in the high voltage triode setup. Current-voltage-characteristics at different pressure levels are recorded and show a decreasing emission current with rising pressure. This decrease can be explained by an increase of the work function and charging of the emitter surface caused by adsorbates. The emission current can be restored to its initial value by heating of the FEA up to 110 °C during active emission. With this regeneration procedure, an extended lifetime from about 20 h to 440 h at a residual gas pressure of 10-5 mbar is achieved.}, language = {en} } @misc{Zrenner, type = {Master Thesis}, author = {Zrenner, Louis}, title = {Modellierung des gekoppelten thermischen und hydraulischen Verhaltens von ZFSV-Bettungen bei erdverlegten H{\"o}chstspannungsleitungen}, doi = {10.35096/othr/pub-1790}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-17905}, school = {Ostbayerische Technische Hochschule Regensburg}, pages = {IX, 122}, abstract = {Durch die dezentrale Energiegewinnung, welche aus dem Fokus auf regenerative Stromerzeugung resultiert, ist ein Ausbau des {\"U}bertragungsnetzes alternativlos - auch mit Hinblick auf den steigenden Strombedarf in den kommenden Jahrzehnten. Der Ausbau ist bereits beschlossene Sache, schreitet aber schleppend voran. Die Gr{\"u}nde hierf{\"u}r sind jedoch nicht etwa Verz{\"o}gerungen in der Bauausf{\"u}hrung, sondern vor allem die Ablehnung innerhalb der Bev{\"o}lkerung gegen{\"u}ber dem Neubau von Stromtrassen. Jahrelange Planungs- und Genehmigungsphasen sowie regelm{\"a}ßige {\"A}nderungen der Trassenverl{\"a}ufe sind die Folge. Die B{\"u}rgerbewegungen gegen den Netzausbau sind meist mit auf dem Einfluss auf das Landschaftsbild, der Strahlungsbelastung oder L{\"a}rmbel{\"a}stigung begr{\"u}ndet. Eine Erdverlegung w{\"u}rde hinsichtlich dieser Probleme (trotz kurzfristiger Mehrbelastung w{\"a}hrend der Bauphase) eine Alternative darstellen, weist jedoch baubedingte Problematiken wie den Abtransport der Verlustw{\"a}rme auf. Bei einer klassischen Sandbettung h{\"a}ngt die W{\"a}rmeleitf{\"a}higkeit maßgeblich vom Wassergehalt des Sandes ab, welcher je nach Witterungslage und geologischen Gegebenheiten sehr stark schwankt. Als Folge muss die Trasse f{\"u}r den ung{\"u}nstigsten Fall und damit unwirtschaftlich bemessen werden. Im Rahmen des Forschungsprojekts „DC-CTL DBI" wurde eine gasisolierte HG{\"U}-Leitung (GIL) erdverlegt und einem Langzeitversuch unterzogen. Anstelle einer Sandbettung wurde jedoch ein zeitweise fließf{\"a}higer, selbstverdichtender Verf{\"u}llbaustoff (ZFSV) verwendet. F{\"u}r den Einsatz als thermische Bettung bietet ein ZFSV mehrere Eigenschaften, welche eine klassische Sandbettung nicht bietet. So ist mit Hinblick auf die verschweißte Aluminium-H{\"u}lle der GIL kein Verdichtungsaufwand n{\"o}tig, welcher bei aktueller Bauform zweifelsfrei in Sch{\"a}den resultieren w{\"u}rde. Dar{\"u}ber hinaus weisen Fl{\"u}ssigb{\"o}den durch den Bentonit-Gehalt eine h{\"o}here adsorbierende Oberfl{\"a}che auf, wodurch der Anteil des Haftwassers im Boden zunimmt und die W{\"a}rmeleitf{\"a}higkeit der Bettung in ihrer Konstanz positiv beeinflusst wird. Im Zuge dieser Arbeit wurden die thermischen und hydraulischen Transportprozesse um die GIL mittels FEM in Plaxis2D untersucht und transient {\"u}ber den gesamten Messzeitraum (18 Monate) berechnet. Hierf{\"u}r wurden die Materialparameter durch labortechnische Versuche ermittelt und die Messergebnisse einer verbauten Wetterstation als Randbedingungen (Niederschlag, Temperatur, Evapotranspiration) aufgebracht. Die Ergebnisse aus Plaxis2D wurden abschließend mit der im Feldversuch verbauten Sensorik verglichen. Es zeigte sich, dass sowohl die Boden- als auch die Leitertemperaturen nur um wenige Grad von den Messwerten der Sensorik abweichen. Anders als bei den etablierten analytischen Bemessungsrechnungen, welche stets auf Vereinfachungen basieren, k{\"o}nnen auch Effekte wie konvektiver W{\"a}rmetransport oder Austrocknung bei gleichzeitig h{\"o}herer Genauigkeit der Ergebnisse untersucht werden. Um den Rechenaufwand gering zu halten, wurden lediglich die thermischen und hydraulischen Entwicklungen und Einfl{\"u}sse des Bodens ber{\"u}cksichtigt. Es ist aber durchaus m{\"o}glich, Verformungen und Kr{\"a}fte in die Berechnung zu integrieren und so ein ganzheitliches Berechnungsmodell zu erstellen.}, language = {de} } @article{LauerGiordanoKreiteretal., author = {Lauer, Norina and Giordano, Katharina and Kreiter, Daniel and Leusch, Vera and Corsten, Sabine}, title = {"Mach mal 'ne App"}, series = {Forum Logop{\"a}die}, volume = {35}, journal = {Forum Logop{\"a}die}, number = {3}, publisher = {Schulz-Kirchner}, doi = {10.2443/skv-s-2021-53020210304}, pages = {20 -- 27}, abstract = {Die Entwicklung qualitativ hochwertiger Apps zur Gesundheitsversorgung erfordert einen aufwendigen Entwicklungsprozess, an den sich eine Evaluation der App-gest{\"u}tzten Maßnahme anschließen sollte, um Aussagen zur Wirksamkeit treffen und somit den App-Einsatz begr{\"u}nden zu k{\"o}nnen. In diesem Beitrag wird die nutzerzentrierte Entwicklung der App BaSeTaLK vorgestellt, mit der eine Tablet-gest{\"u}tzte Stimulation biographisch orientierter Gespr{\"a}che bei {\"a}lteren Menschen zur Verbesserung des psychischen Wohlbefindens erm{\"o}glicht werden soll. Nach erfolgreicher Evaluation k{\"o}nnten Logop{\"a}dInnen als MultiplikatorInnen den Einsatz der App vermitteln.}, subject = {App}, language = {de} } @misc{OPUS4-1186, title = {Geschlechtergerechtigkeit und MINT}, editor = {Rudolph, Clarissa and Reber, Anne and Dollsack, Sophia}, publisher = {Verlag Barbara Budrich}, address = {Opladen ; Berlin ; Toronto}, isbn = {978-3-8474-1674-6}, doi = {10.3224/84742519}, pages = {277}, subject = {Hochschule}, language = {de} } @article{LuehrmannWeiss, author = {L{\"u}hrmann, Melanie and Weiss, Matthias}, title = {The Effect of Working Time and Labor Force Participation on Unemployment}, series = {Economic Modelling}, volume = {27}, journal = {Economic Modelling}, number = {1}, doi = {10.1016/j.econmod.2009.07.024}, pages = {67 -- 82}, abstract = {This paper introduces a new argument into the theoretical literature on labor market effects of changes in working hours and labor force participation. We advance a general equilibrium model in which increased labor supply reduces unskilled unemployment via consumer demand: longer work hours and higher labor force participation imply higher incomes and less (leisure) time. In consequence, home production is reduced in favor of outsourcing domestic tasks to the market, shifting consumer demand toward unskill-intensive goods. Relative demand for unskilled labor rises and unemployment falls. Finally, we provide empirical support for the basic mechanisms of our model for Germany.}, language = {en} } @incollection{BoerschSupanDuezguenWeiss, author = {B{\"o}rsch-Supan, Axel and D{\"u}zg{\"u}n, Ismail and Weiss, Matthias}, title = {Altern und Produktivit{\"a}t}, series = {Produktivit{\"a}t in alternden Gesellschaften}, booktitle = {Produktivit{\"a}t in alternden Gesellschaften}, editor = {B{\"o}rsch-Supan, Axel and Erlinghagen, Marcel and Hank, Karsten and J{\"u}rges, Hendrik and Wagner, Gert G.}, publisher = {Wissenschaftliche Verlagsgesellschaft mbH}, address = {Stuttgart}, pages = {53 -- 62}, subject = {Alternde Bev{\"o}lkerung}, language = {de} } @incollection{IlmakunnasSkirbekkvanOursetal., author = {Ilmakunnas, Pekka and Skirbekk, Vegard and van Ours, Jan and Weiss, Matthias}, title = {Ageing and Productivty}, series = {Ageing, Health, and Productivity: The Economics of Increased Life Expectancy}, booktitle = {Ageing, Health, and Productivity: The Economics of Increased Life Expectancy}, editor = {Garibaldi, Pietro}, publisher = {Oxford University Press}, address = {Oxford}, pages = {135 -- 219}, subject = {Alter}, language = {en} } @article{Weiss, author = {Weiss, Matthias}, title = {Skill-Biased Technological Change}, series = {Economics Letters}, volume = {100}, journal = {Economics Letters}, number = {3}, doi = {10.1016/j.econlet.2008.03.022}, pages = {439 -- 441}, abstract = {This paper presents a model in which perpetual skill-biased technological change does not lead to ever-increasing wage inequality. The model is consistent with the increase in wage inequality in the 1980s and the subsequent stabilization in the 1990s.}, language = {en} } @incollection{BoerschSupanDuezguenWeiss, author = {B{\"o}rsch-Supan, Axel and D{\"u}zg{\"u}n, Ismail and Weiss, Matthias}, title = {Sinkende Produktivit{\"a}t alternder Belegschaften?}, series = {L{\"a}nger leben, arbeiten und sich engagieren. Chancen werteschaffender Besch{\"a}ftigung bis ins Alter}, booktitle = {L{\"a}nger leben, arbeiten und sich engagieren. Chancen werteschaffender Besch{\"a}ftigung bis ins Alter}, editor = {Prager, Jens U. and Schleiter (Hrsg.), Andr{\´e}}, publisher = {Bertelsmann Stiftung}, address = {G{\"u}tersloh}, isbn = {3892049130}, pages = {85 -- 102}, language = {de} } @article{BoerschSupanWeiss, author = {B{\"o}rsch-Supan, Axel and Weiss, Matthias}, title = {Erfahrungswissen in der Arbeitswelt}, series = {Potenziale im Altern. Chancen und Aufgaben f{\"u}r Individuum und Gesellschaft}, journal = {Potenziale im Altern. Chancen und Aufgaben f{\"u}r Individuum und Gesellschaft}, editor = {Kruse, Andreas}, publisher = {AKA}, address = {Heidelberg}, pages = {221 -- 234}, language = {de} } @article{Weiss, author = {Weiss, Matthias}, title = {Absenteeism in Age-Diverse Work Teams}, series = {Labour Markets and Demographic Change}, journal = {Labour Markets and Demographic Change}, editor = {Kuhn, Michael and Ochsen, Carsten}, publisher = {VS Verlag}, address = {Wiesbaden}, doi = {10.1007/978-3-531-91478-7_3}, pages = {40 -- 57}, abstract = {Age-diverse work teams are being advocated as an important management tool to enhance performance and productively employ older workers. However, this advice is not founded on empirical evidence. There are very few studies that look at the relation between performance and age diversity of work teams. This lack of evidence is mainly due to a lack of available data. Information on performance and worker composition of a productive unit is available almost exclusively on the plant level in matched employer-employee data sets. But on the plant level/age heterogeneity of the workforce does not tell much about age diversity on the level where co-operation/teamwork takes place (work teams, departments, etc.). If all of the older workers work in the administration whereas all the young employees work in the production, the firm's workforce may be highly age-diverse, but work teams and departments are age-homogeneous. This problem notwithstanding, Grund and Westerg{\aa}rd-Nielsen (2005) look at the relation between productivity and the standard deviation of workers' age in a sample of 7,000 Danish firms. They find a hump-shaped relation.}, language = {en} } @article{Weiss, author = {Weiss, Matthias}, title = {Erfahrung kompensiert nachlassende F{\"a}higkeiten}, series = {Personalf{\"u}hrung}, journal = {Personalf{\"u}hrung}, number = {1}, pages = {56 -- 58}, language = {de} } @article{SternerBauer, author = {Sterner, Michael and Bauer, Franz}, title = {Power-to-X im Kontext der Energiewende und des Klimaschutzes in Deutschland}, series = {Chemie-Ingenieur-Technik}, volume = {92}, journal = {Chemie-Ingenieur-Technik}, number = {1-2}, publisher = {Wiley}, issn = {0009-286X}, doi = {10.1002/cite.201900167}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-11669}, pages = {85 -- 90}, abstract = {Um den Einfluss verschiedener Power-to-X-Verfahren auf die Transformation des deutschen Energiesystems und das Erreichen der Klimaschutzziele zu {\"u}berpr{\"u}fen, wurde ein sektor{\"u}bergreifendes Energiesystemmodel entwickelt. Die daraus gewonnenen Ergebnisse zeigen: F{\"u}r eine erfolgreiche Energiewende ist der Einsatz von Power-to-X in Zukunft unverzichtbar. Vor allem in Bereichen und Sektoren, in denen hohe Energiedichten erforderlich und nur wenig andere Optionen zur Defossilisierung vorhanden sind, werden Power-to-X-Technologien zwingend notwendig.}, subject = {Power-to-Gas}, language = {de} } @article{SchubertHoefflingerSchroederetal., author = {Schubert, Martin J. W. and H{\"o}fflinger, Bernd and Schr{\"o}der, D. and Zingg, Ren{\´e} P.}, title = {1D Modeling of SOI MOSFETs Using Distinct Quasi-Fermi Potentials}, series = {Microelectronic Engineering}, volume = {15}, journal = {Microelectronic Engineering}, number = {1-4}, doi = {10.1016/0167-9317(91)90221-X}, pages = {237 -- 240}, abstract = {Distinct electron and hole quasi-Fermi potentials, {\o}f,n and {\o}f,p, are included into a one-dimensional SOI MOSFET model that accounts for finite inversion and depletion layer thicknesses. The inclusion of {\o}f,n, {\o}f,p in the nonlinear analytical model is demonstrated to describe phenomena like kink effect and the multistable-charge-controlled-memory effect (MCCM) in SOI MOSFETs. The calculation of {\o}f,p(t) depends on the device history and generation/recombination rates.}, language = {en} } @inproceedings{Schubert, author = {Schubert, Martin J. W.}, title = {Mixed Analog-Digital Signal Modeling Using Event-Driven VHDL}, series = {X Brazilian Symposium on Integrated Circuit Design (SBCCI'97), August 25-27 1997, Porto Alegre, Brazil}, booktitle = {X Brazilian Symposium on Integrated Circuit Design (SBCCI'97), August 25-27 1997, Porto Alegre, Brazil}, pages = {77 -- 86}, abstract = {A method for solving networks containing generic analog components such as resistors, capacitors and inductors onan event driven time axis using digital VHDL is presented. The components are modeled as complex state machines communicating with their neighbors using INOUT type ports. The method takes advantage of simulation deltas to iterate without simulation-time consumption. A limited range of implicit equations can be solved this way.}, language = {en} } @article{Schubert, author = {Schubert, Martin J. W.}, title = {70V-to-5V Differential CMOS Input Interface}, series = {IEE Electronic Letters}, volume = {30}, journal = {IEE Electronic Letters}, number = {4}, doi = {10.1049/el:19940235}, pages = {296 -- 297}, language = {en} } @inproceedings{DeclerqSchubertClement, author = {Declerq, Michel and Schubert, Martin J. W. and Cl{\´e}ment, F.}, title = {5V-to-75V CMOS Output Interfaces}, series = {Proceedings of the1993 IEEE International Solid-State Circuits Conference (ISSCC), Feb. 24-26 1993, San Francisco, CA, USA}, booktitle = {Proceedings of the1993 IEEE International Solid-State Circuits Conference (ISSCC), Feb. 24-26 1993, San Francisco, CA, USA}, doi = {10.1109/ISSCC.1993.280014}, pages = {162 -- 163}, abstract = {A family of CMOS low- to high-voltage output interface circuits based on a standard, unmodified low-voltage CMOS technology is described. Using only thin-oxide high-voltage (HV) devices with reduced V/sub GS/ (gate-to-source voltage) swing, it makes use of level-shift techniques to meet the constraints on the gate control signals. These static circuits permit the full output voltage swing of V/sub DDH/, while keeping the V/sub GS/ swing of the output devices within the safety limits, including during HV supply transients. Using a standard 2- mu m n-well CMOS technology, reliable, reproducible V/sub DS/ breakdown voltages as high as 120 V and 80 V have been obtained for HV-nMOS and HV-pMOS devices, respectively.< >}, language = {en} } @article{SchubertHoefflingerZingg, author = {Schubert, Martin J. W. and H{\"o}fflinger, Bernd and Zingg, Ren{\´e} P.}, title = {An Analytical Model for Strongly Inverted and Accumulated Silicon Films}, series = {Solid-State Electronics}, volume = {33}, journal = {Solid-State Electronics}, number = {12}, publisher = {Elsevier}, doi = {10.1016/0038-1101(90)90136-3}, pages = {1553 -- 1567}, abstract = {An analytical model for the spatial distribution of potential, electric field and carrier densities is presented, assuming uniform doping density and constant quasi-Fermi potentials in the direction of modeling. Starting from the current relations a differential equation respecting two-dimensional effects is developed and solved approximately by decomposition in three regions with different preconditions: (a) flatband region, (b) constant spacecharge density and (c) strong inversion or accumulation. Inaccuracies arise mainly from violated preconditions at the interfaces between the different regions. Two-dimensional effects are respected in the analytical model of (b) only but they influence region (c) by means of boundary conditions at the interface of (b) and (c). The investigations of this paper are focused to region (c). This part of our model is identical to the model of Hauser and Littlejohn[1]. They integrated a simplified form of the semiconductor-Poisson equation twice but were restricted to one-dimensional applications and thermal equilibrium. Our derivation allows for large electric fields and current densities perpendicular to the direction of modeling. From analytical considerations confirmed by numerical experiments we suggest preference to the gradual channel condition, with x and y defined according to Fig. 1. This definition allows the potentials to vary significantly with respect to y. We found that this holds for the quasi-Fermi potentials also. Furthermore an empirical model for the maximum width of strong-inversion layers in uniformly doped silicon films is presented in eqn (46).}, language = {en} } @inproceedings{Schubert, author = {Schubert, Martin J. W.}, title = {Mixed Signal Modeling in VHDL by Distributed Local Iteration}, series = {VHDL Form, Toledo, Spain, April 20-24, 1997}, booktitle = {VHDL Form, Toledo, Spain, April 20-24, 1997}, language = {en} } @inproceedings{DeclerqClementSchubertetal., author = {Declerq, Michel and Cl{\´e}ment, F. and Schubert, Martin J. W. and Harb, Adnan and Dutoit, Michel}, title = {Design and Optimization of High-Voltage CMOS Devices Compatible wih a Standard 5V CMOS Technology}, series = {Proceedings of IEEE Custom Integrated Circuits Conference, May 9-12 1993, San Diego, CA, USA}, booktitle = {Proceedings of IEEE Custom Integrated Circuits Conference, May 9-12 1993, San Diego, CA, USA}, isbn = {0-7803-0826-3}, doi = {10.1109/CICC.1993.590766}, pages = {24.6.1 -- 24.6.4}, abstract = {High-voltage n- and p-MOSFETs fully compatible with a standard 5 V CMOS technology have been designed, optimized, and fabricated. No process changes are required. By modifying the logical equations generating one of the physical masks from the design masks, a p-type buffer region for the high-voltage p-MOS was easily implemented. This modification does not affect the low-voltage part of the circuits. These high-voltage devices have been used successfully as output drivers in semicustom arrays, and as building blocks for custom low- to high-voltage output interfaces. Aspects of reliability, device protection, and circuit design techniques are addressed.}, language = {en} } @phdthesis{Schubert, author = {Schubert, Martin J. W.}, title = {Eindimensionale Modellierung von SOI MOSFETs}, address = {Hamburg}, language = {de} } @article{SchubertHoefflingerZingg, author = {Schubert, Martin J. W. and H{\"o}fflinger, Bernd and Zingg, Ren{\´e} P.}, title = {A One-Dimensional Analytical Model for the Dual-Gate-Controlled Thin-Film SOI MOSFET}, series = {IEEE Electron Device Letters}, volume = {12}, journal = {IEEE Electron Device Letters}, number = {9}, doi = {10.1109/55.116927}, pages = {489 -- 491}, abstract = {A one-dimensional analytical model for dual-gate-controlled SOI MOSFETs is presented and applied to a stacked p-channel MOSFET fabricated by epitaxial lateral overgrowth (ELO). The authors found and modeled a nonlinear dependence of front-gate threshold voltage on back-gate voltage if threshold is defined by a constant current instead of a constant silicon-surface potential. It is demonstrated by comparison of subthreshold slopes that surface potentials are not pinned to the onset of strong inversion or accumulation. Accurate one-dimensional modeling is a necessity for device characterization and a precondition for general SOI models for circuit simulation.< >}, language = {en} } @inproceedings{SchubertHoefflingerZingg, author = {Schubert, Martin J. W. and H{\"o}fflinger, Bernd and Zingg, Ren{\´e} P.}, title = {A New Analytical Charge Model for the Dual-Gate-Controlled Thin-Film SOI MOSFET}, series = {Superlattices and Microstructures}, volume = {7}, booktitle = {Superlattices and Microstructures}, number = {4}, publisher = {Elsevier}, doi = {10.1016/0749-6036(90)90218-V}, pages = {323 -- 326}, abstract = {An analytical model for dual-gate-controlled SOI MOSFETs is presented, assuming uniformly doped p-silicon films. It is restricted to electron inversion layers and depletion regions, neglecting hole densities. It allows to account for the spatial description of electronic quantities in the silicon film. Due to the non-linearities of the semiconductor equations the model parameters must be extracted iteratively. Some applications are presented to demonstrate the usefulness of the model.}, language = {en} } @misc{Spirkl, type = {Master Thesis}, author = {Spirkl, Florian}, title = {Vergleichende rechnerische Untersuchungen zur Lastaufteilung und Setzungen von Stabilisierungss{\"a}ulen mit Lasttransferschichten}, address = {Regensburg}, doi = {10.35096/othr/pub-1571}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-15713}, school = {Ostbayerische Technische Hochschule Regensburg}, pages = {121}, abstract = {Die Erschließung von Neubaufl{\"a}chen, steigende Bauwerkslasten und strengere Anforderungen an Setzungen und Setzungsdifferenzen f{\"u}hren zu einem steigenden Bedarf an Tiefgr{\"u}ndungsmaßnahmen. Eine relativ junge Entwicklung auf diesem Gebiet ist die Anwendung von Stabilisierungss{\"a}ulen (StS) und pfahl{\"a}hnlichen Tragelementen als Alternative zur konventionellen Pfahlgr{\"u}ndung. Auf Grund der im Vergleich zum Pfahl geringeren Tragf{\"a}higkeit der StS werden diese zumeist als „S{\"a}ulenwald" angeordnet und die abzutragende Last {\"u}ber eine Lasttransferschicht (LTS) auf die einzelnen StS abgeleitet. Zus{\"a}tzlich wird h{\"a}ufig eine oder mehrere Geogitterlagen eingebracht, was zur Erh{\"o}hung des Lastanteils der StS f{\"u}hrt. Ein g{\"a}ngies Anwendungsbeispiel hierf{\"u}r ist z.B. die Gr{\"u}ndung eines Damms. {\"U}ber die Lastaufteilung zwischen StS und anstehender Weichschicht wurden im Laufe der Jahre verschiedenste Theorien und Berechnungsans{\"a}tze ver{\"o}ffentlicht. Zun{\"a}chst wird eine Auswahl verschiedener geschlossener Berechnungsans{\"a}tze f{\"u}r den 3-dimensionalen Fall vorgestellt und miteinander verglichen. Diesen ist gemein, dass f{\"u}r die Lastaufteilung lediglich die bodenmechanischen Eigenschaften der LTS und die geometrischen Parameter ben{\"o}tigt werden. Eine Ber{\"u}cksichtigung der anstehenden Weichschicht ist z.B. bei der iterativen Berechnung mittels Lasttransfermethode oder bei FE-Berechnungen m{\"o}glich. Diese Ans{\"a}tze werden, da durch die Ber{\"u}cksichtigung der Eigenschaften der Weichschicht weitere Freiheitsgrade entstehen, gesondert miteinander verglichen. Abschließend wird an Hand zweier Beispiele die Komplexit{\"a}t der Problemstellung „Ermittlung der Laustaufteilung zwischen StS und WS" aufgezeigt.}, language = {de} } @inproceedings{RomanoMicklitzOlbrichetal., author = {Romano, Marco and Micklitz, Matthias and Olbrich, Florian and Bierl, Rudolf and Ehrlich, Ingo and Gebbeken, Norbert}, title = {Experimental investigation of damping properties of unidirectionally and fabric reinforces plastics by the free decay method}, series = {Proceeding of the 15th International Materials Symposium (IMSP´2014), Pamukkale University (Denizli, Turkey), 15./17. October 2014}, booktitle = {Proceeding of the 15th International Materials Symposium (IMSP´2014), Pamukkale University (Denizli, Turkey), 15./17. October 2014}, pages = {665 -- 679}, language = {en} } @inproceedings{vanderWeerdBierlMatysik, author = {van der Weerd, Bastiaan and Bierl, Rudolf and Matysik, Frank-Michael}, title = {A Conductivity Probe for the Determination of Carbon Dioxide Tension at the Oxygenator Exhaust Outlet during Extracorporeal Membrane Oxygenation (ECMO)}, series = {Electrochemistry 2014, September 22 - 24, Mainz}, booktitle = {Electrochemistry 2014, September 22 - 24, Mainz}, language = {en} } @misc{vanderWeerdBierlMatysik, author = {van der Weerd, Bastiaan and Bierl, Rudolf and Matysik, Frank-Michael}, title = {A Conductivity Probe for Determination of the Carbon Dioxide Tension at the Oxygenator Exhaust Outlet during Extracorporeal Membrane Oxygenation (ECMO)}, series = {Proceedings of the 9th ISC Modern Analytical Chemistry 2013, Prag}, journal = {Proceedings of the 9th ISC Modern Analytical Chemistry 2013, Prag}, language = {en} } @misc{RueckHofmannBierl, author = {R{\"u}ck, Thomas and Hofmann, Matthias and Bierl, Rudolf}, title = {Development of a miniaturized photoacoustic multigas sensing system for trace gas measurement}, series = {17th International Conference on Photoacoustic and Photothermal Phenomena, Oct. 20-24, 2013, Suzhou China}, journal = {17th International Conference on Photoacoustic and Photothermal Phenomena, Oct. 20-24, 2013, Suzhou China}, language = {en} } @inproceedings{vanderWeerdBierlMatysik, author = {van der Weerd, Bastiaan and Bierl, Rudolf and Matysik, Frank-Michael}, title = {A Conductivity Probe for the Determination of Carbon Dioxide Tension at the Oxygenator Exhaust Outlet during Extracorporeal Membrane Oxygenation (ECMO)}, series = {analytica Conference 2014, 1. bis 4. April, M{\"u}nchen}, booktitle = {analytica Conference 2014, 1. bis 4. April, M{\"u}nchen}, language = {en} } @inproceedings{HofmannBierlRueck, author = {Hofmann, Matthias and Bierl, Rudolf and R{\"u}ck, Thomas}, title = {Implementation of a dual-phase lock-in amplifier on a TMS320C5515 digital signal processor}, series = {Proceedings of the 5th European DSP Education and Research Conference (EDERC), 13-14 Sept. 2012, Amsterdam}, booktitle = {Proceedings of the 5th European DSP Education and Research Conference (EDERC), 13-14 Sept. 2012, Amsterdam}, doi = {10.1109/EDERC.2012.6532217}, abstract = {A digital dual-phase lock-in amplifier that is capable to run on a low-cost, low-power platform comprising a 16-bit fixed-point digital signal processor was developed. This is achieved by a set of optimised digital filters including an exponential averager to adjust the time constant of the overall filter. The reference frequency is generated using a direct digital synthesis source utilising angle decomposition with a resolution of 1 Hz. The digital lock-in algorithm is described and the performance of the algorithm is analysed. The experimental results show that the developed lock-in amplifier achieves similar performance to a commercially available lock-in amplifier.}, language = {en} } @techreport{UngerRueckLandgrafetal., author = {Unger, J. and R{\"u}ck, Thomas and Landgraf, Ferdinand and Bierl, Rudolf}, title = {Herstellung und Analyse der Resonanzfrequenz eines MEMS Cantilever f{\"u}r das CEPAS Verfahren}, abstract = {Diese Abhandlung beschreibt das Konzept eines mikroeletromechanischen Systems (MEMS), das im Messverfahren der cantilever enhanced photoacoustic spectroscopy (CEPAS) Verwendung finden soll. Es wird die Herstellung eines einseitig eingespannten Biegebalkens aus Silizium mittels deep reactiv ion etching (DRIE) beschrieben. Des Weiteren wird die Resonanzfrequenz dieses Cantilevers mit Hilfe Laservibrometertechnik untersucht. Die resultierenden resonanten Schwingungen 0.Ordnung werden mit den Ergebnissen einer vereinfachten theoretischen N{\"a}herung verglichen. Die Messergebnisse stehen in gutem Zusammenhang mit den theoretischen Werten. Solche Cantilever, die aus silicon on insula tor (SOI) Wafer angefertigt wurden, weisen bei einer Zielfrequenz ein mittlere Abweichung von Δf = 118±26Hz (bzw.Δf =0,76±0,17\%) auf.}, language = {de} } @article{RomanoMicklitzOlbrichetal., author = {Romano, Marco and Micklitz, Matthias and Olbrich, Florian and Bierl, Rudolf and Ehrlich, Ingo and Gebbeken, Norbert}, title = {Experimental investigation of damping properties of unidirectionally and fabric reinforced plastics by the free decay method}, series = {Journal of Achievements in Materials and Manufacturing Engineering}, volume = {63}, journal = {Journal of Achievements in Materials and Manufacturing Engineering}, number = {2}, pages = {65 -- 80}, abstract = {Purpose: of this paper is experimental investigation of damping properties of unidirectionally and fabric reinforced plastics by the free decay method. Design/methodology/approach: For the evaluation of the presumed effect experimental structural dynamic investigations comparing unidirectionally and fabric reinforced plastics are carried out. In detail the free decay behaviour of flat beamlike specimens under fixed-free boundary conditions and relatively constant and reproducible displacement excitation is investigated. Findings: The vibrating structure has been measured by a laser scanning vibrometer PSV 400 from POLYTEC. In both cases evaluation of the results yields enhanced damping properties of the specimens with fabric reinforcement compared to the unidirectionally reinforced specimens. The results justify the presumed acting of a mesomechanic kinematic. Research limitations/implications: The results show that in either case the material damping in terms of the logarithmic decrement of the fabric reinforced material is higher than the material damping in of the unidirectionally reinforced material. Additionally, when the fabric reinforced specimens are addressed, in each case the plain weave reinforced specimens exhibited higher values of the material damping as the twill weave 2/2 reinforced ones. Originality/value: Ondulations in fabrics as a textile semi-finished product are caused by the alternating crossing of warp and fill yarns. In the mesoscopic scale the acting of a mesomechanic kinematic is presumed to enhance the damping properties under cyclic elastic deformation. For the evaluation of the presumed effect experimental structural dynamic investigations comparing unidirectionally and fabric reinforced plastics are carried out.}, language = {en} } @inproceedings{EisenriedRomanoJungbaueretal., author = {Eisenried, Michael and Romano, Marco and Jungbauer, Bastian and Ehrlich, Ingo and Gebbeken, Norbert}, title = {Influence of parameters of the production process on the material quality of unidirectionally reinforced prepregs}, series = {Applied Research Conference 2013, ARC 2013 ; 17th and 18th October 2013, Deggendorf}, booktitle = {Applied Research Conference 2013, ARC 2013 ; 17th and 18th October 2013, Deggendorf}, editor = {Ziemann, Olaf and Bogner, Werner and Mottok, J{\"u}rgen}, publisher = {Shaker}, address = {Aachen}, pages = {70 -- 75}, language = {en} } @inproceedings{BrulandSchmidEhrlich, author = {Bruland, Matthias and Schmid, Vinzent and Ehrlich, Ingo}, title = {Analyzing and Testing of a Single Solution of Self-cutting Thread Inserts in Composites}, series = {Applied Research Conference 2014 - ARC 2014, 5th July 2014, Ingolstadt}, booktitle = {Applied Research Conference 2014 - ARC 2014, 5th July 2014, Ingolstadt}, editor = {Ziemann, Olaf and Mottok, J{\"u}rgen and Pforr, Johannes}, publisher = {Shaker}, pages = {286 -- 288}, language = {en} } @inproceedings{HoinkesRomanoEhrlichetal., author = {Hoinkes, Carl J. J. and Romano, Marco and Ehrlich, Ingo and H{\"o}cherl, Johannes and Gebbeken, Norbert}, title = {Investigation of fibre reinforced plastics with monolithic and hybrid stacking sequences under high-velocity impact loads}, series = {Applied Research Conference 2014 - ARC 2014, 5th July 2014, Ingolstadt}, booktitle = {Applied Research Conference 2014 - ARC 2014, 5th July 2014, Ingolstadt}, editor = {Ziemann, Olaf and Mottok, J{\"u}rgen and Pforr, Johannes}, publisher = {Shaker}, address = {Aachen}, language = {en} } @inproceedings{ValentinoRomanoEhrlichetal., author = {Valentino, Piergiorgio and Romano, Marco and Ehrlich, Ingo and Furgiuele, Franco and Gebbeken, Norbert}, title = {Mechanical characterization of basalt fibre reinforced plastic with different fabric reinforcements - Tensile tests and FE-calculations with representative volume elements (RVEs)}, series = {Acta Fracturae - XXll Convegno Nazionale IGF (Italiano Gruppo Frattura)}, booktitle = {Acta Fracturae - XXll Convegno Nazionale IGF (Italiano Gruppo Frattura)}, editor = {Iacovello, F. and Risitano, G. and Susmel, L.}, abstract = {This paper describes the results of tensile tests and finite element (FE) calculations with representative volume elements (RVEs) of basalt fibre reinforced plastic with two different types of fabric reinforcements. As fabric reinforcements show repeating ondulations of warp and fill yarn, simple mixtures laws reach their limits. That is the reason why the mesoscopic dimension, lying between the microscopic and the macroscopic dimension, has to be taken into account when a mechanical characterization of fabric reinforced composites is carried out. The aim of this work is to determine the stiffness of a fabric reinforced composite in warp and fill direction with numerical investigations. The simulations are based on FE-calculation with two different RVEs. The tensile tests and the FE-calculations have been carried out for two different types of basalt fabrics, namely twill 2/2 and twill 1/3. The comparison between the experimental data and the results of the FE-calculations are provided in order to support the validity of the proposed model.}, language = {en} } @inproceedings{IbanezGomezKastenmeierEhrlich, author = {Ibanez Gomez, D. and Kastenmeier, Andreas and Ehrlich, Ingo}, title = {Development and construction of a winding machine for the production of composite tubes}, series = {4th Applied Research Conference - ARC 2014, 5th July 2014, Ingolstadt}, booktitle = {4th Applied Research Conference - ARC 2014, 5th July 2014, Ingolstadt}, editor = {Ziemann, Olaf and Mottok, J{\"u}rgen and Pforr, Johannes}, publisher = {Shaker}, address = {Aachen}, pages = {315 -- 318}, language = {en} } @inproceedings{SieglRiegerKovariketal., author = {Siegl, Marco and Rieger, David and Kov{\´a}r{\´i}k, Tom{\´a}š and Ehrlich, Ingo}, title = {Long-Term Behavior of Thermoplastics under UV Light tested by a self-build Device}, series = {3. OTH-Clusterkonferenz, 13. April 2018, Weiden, Tagungsband; Festschrift, 5 Jahre OTH-Verbund}, booktitle = {3. OTH-Clusterkonferenz, 13. April 2018, Weiden, Tagungsband; Festschrift, 5 Jahre OTH-Verbund}, organization = {Ostbayerische Technische Hochschule}, pages = {118 -- 122}, abstract = {This article presents first results of artificial aging experi-ments by ultraviolet (UV) irradiation on thermoplasticmaterials conducted as an intent of the research project Thermoplastic Composite Structures (TheCoS) in colla-boration of the Ostbayerische Technische Hochschule(OTH) Regensburg and the University of West Bohemia(UWB) in Pilsen as part of a cross-border cooperation. In technical applications, thermoplastic materials are oftenaffected by aging and a related deterioration of the mechanical properties. Therefore, it is necessary to identifythe aging behavior of thermoplastic materials. For this,experiments were performed for three thermoplasticmaterials, namely polypropylene (PP), ultra high mole -cular weight polyethylene (UHMWPE) and high impactstrength polystyrene (HIPS). For these experiments, a UV chamber was constructed according to the internationalstandard EN ISO 4892-3 for simulation of exposurebehind window glass. The results are evaluated by testing the flexural strength and the dynamic mechanicalresponse after a selected period of time under UV lightand then compared to untreated test specimens.}, language = {en} } @inproceedings{NiebauerSchmidEhrlich, author = {Niebauer, M. and Schmid, Vinzent and Ehrlich, Ingo}, title = {Failure Criteria of Adhesively Bonded Joints}, series = {Applied Research Conference 2015 - ARC 2015, N{\"u}rnberg, 3rd July 2015 - 16. Juli 2015}, booktitle = {Applied Research Conference 2015 - ARC 2015, N{\"u}rnberg, 3rd July 2015 - 16. Juli 2015}, editor = {Mottok, J{\"u}rgen and Reichenberger, Marcus and Scharfenberg, J. and Ziemann, Olaf}, publisher = {Pro Business Verlag}, address = {Berlin}, isbn = {978-3863869458}, pages = {347 -- 351}, language = {en} } @inproceedings{RomanoHoinkesEhrlichetal., author = {Romano, Marco and Hoinkes, Carl J. J. and Ehrlich, Ingo and H{\"o}cherl, Johannes and Gebbeken, Norbert}, title = {Influence of the impactor on the experimentally determined energy dissipation properties of fiber-reinforced plastics with hybrid layups under high velocity impact loads}, series = {Proceeding of the 15th International Materials Symposium (IMSP´2014), Pamukkale University (Denizli, Turkey), 15./17. October 2014}, booktitle = {Proceeding of the 15th International Materials Symposium (IMSP´2014), Pamukkale University (Denizli, Turkey), 15./17. October 2014}, editor = {Meran, C.}, pages = {650 -- 664}, language = {en} } @inproceedings{NiedernhuberEhrlichHoltmannspoetter, author = {Niedernhuber, Michal and Ehrlich, Ingo and Holtmannsp{\"o}tter, Jens}, title = {Fiber-Oriented Repair of Fiber Reinforced Plastics: Investigations on Tensile Specimens}, series = {4th Applied Research Conference - ARC 2014, 5th July 2014, Ingolstadt}, booktitle = {4th Applied Research Conference - ARC 2014, 5th July 2014, Ingolstadt}, editor = {Ziemann, Olaf and Mottok, J{\"u}rgen and Pforr, Johannes}, publisher = {Shaker}, address = {Aachen}, pages = {298 -- 302}, language = {en} }