@incollection{BoerschSupanDuezguenWeiss, author = {B{\"o}rsch-Supan, Axel and D{\"u}zg{\"u}n, Ismail and Weiss, Matthias}, title = {Labor Productivity in an Aging Society}, series = {Frontiers in Pension Finance}, booktitle = {Frontiers in Pension Finance}, editor = {Broeders, Dirk and Eijffinger, Sylvester C.W. and Houben, Aerdt}, publisher = {Edward Elgar}, address = {Cheltenham}, doi = {10.4337/9781847209924.00013}, pages = {83 -- 98}, abstract = {How to deliver adequate pension benefits at reasonable costs is a huge challenge confronting our ageing societies. This book delivers a comprehensive overview of the latest insights into pension finance, pension system design, pension governance and risk based supervision. It combines state-of-the-art analyses with innovative policy proposals to increase the efficiency and resilience of pension systems and to advance these systems' contribution to global financial stability. Renowned pension experts offer cutting-edge guidance for future decision making and the development of best practices. This exciting exploration of the frontiers in pension finance highlights key aspects of securing long term retirement provisions.}, language = {en} } @article{Weiss, author = {Weiss, Matthias}, title = {On the Evolution of Wage Inequality in Acemoglu's Model of Directed Technical Change}, series = {Applied Economics Letters}, volume = {16}, journal = {Applied Economics Letters}, number = {6}, publisher = {Taylor \& Francis}, doi = {10.1080/13504850701206452}, pages = {591 -- 595}, abstract = {In Acemoglu's model of directed technical change, the skill-premium increases in consequence of an increase in the relative supply of skilled labour. In this article, I argue that other measures of wage inequality such as the Gini-coefficient do not necessarily rise as well. The Gini-coefficient depends positively on the skill-premium, but the effect of an increase in the relative supply of skilled labour is ambiguous. A simulation of Acemoglu's model shows that the growth in the relative supply of skilled labour has led to increased wage inequality in the past, but will lead to decreasing wage inequality in the future.}, language = {en} } @article{WeissGarloff, author = {Weiss, Matthias and Garloff, Alfred}, title = {Skill Biased Technological Change and Endogenous Benefits}, series = {Applied Economics}, volume = {43}, journal = {Applied Economics}, number = {7}, publisher = {Taylor \& Francis}, doi = {10.1080/00036840802599933}, pages = {811 -- 821}, abstract = {In this article, we study the effect of skill-biased technological change on unemployment and wage inequality in the presence of a link between social benefits and average income. In this case, an increase in the productivity of skilled workers, and hence their wage, leads to an increase in average income and hence in benefits. The increased fallback income, in turn, makes unskilled workers ask for higher wages. As higher wages are not justified by corresponding productivity increases, unemployment rises. Generally, we show that skill-biased technological change leads to increasing unemployment of the unskilled and to a moderately increasing wage inequality when benefits are endogenous. The model provides a theoretical explanation for diverging dynamics in wage inequality and unemployment under different social benefits regimes. Analysing the social legislation in 14 countries, we find that benefits are linked to the evolution of average income in Continental Europe but not in the US and the UK. Given this institutional difference, our model predicts that skill-biased technological change leads to rising unemployment in Continental Europe and rising wage inequality in the US and the UK.}, language = {en} } @phdthesis{Weiss, author = {Weiss, Matthias}, title = {Labor Market Effects of Technological Change and Working Time Reduction}, language = {en} } @article{BoerschSupanDuezguenWeiss, author = {B{\"o}rsch-Supan, Axel and D{\"u}zg{\"u}n, Ismail and Weiss, Matthias}, title = {Altern und Produktivit{\"a}t}, series = {Personalf{\"u}hrung}, journal = {Personalf{\"u}hrung}, number = {07}, pages = {74 -- 81}, abstract = {Der Zusammenhang zwischen Alter und Leistungsf{\"a}higkeit von Besch{\"a}ftigten wird in den verschiedensten Disziplinen untersucht - mit zum Teil recht unterschiedlichen Ergebnissen. Dieser Beitrag gibt einen {\"U}berblick {\"u}ber die Literatur und diskutiert die Notwendigkeit einer neuen Sicht der Produktivit{\"a}tsmessung. Bisherige Studien besch{\"a}ftigen sich mit der Messung der individuellen Produktivit{\"a}t. In einer modernen arbeitsteiligen Gesellschaft realisiert sich die Arbeitsproduktivit{\"a}t allerdings weniger in der Einzelperson als vielmehr im Zusammenwirken von j{\"u}ngeren (innovativen, flexiblen?) und {\"a}lteren (erfahrenen?) Mitarbeitern.}, language = {de} } @inproceedings{GreinerCurrleEttletal., author = {Greiner, Nina and Currle, Edda and Ettl, Katrin and Frommeld, Debora and Haug, Sonja and Kudienko, Natalie and Lauer, Norina and Lichtenauer, Norbert and Meussling-Sentpali, Annette and Middel, Luise and Mohr, Christa and Pfingsten, Andrea and Popp, Christof and Raptis, Georgios and Weber, Karsten}, title = {Technik im Alltag - Technik zum Leben : Telepr{\"a}senzgest{\"u}tzte Pflege und Therapie bei Schlaganfallpatient*innen}, series = {Kann Digital Pflege?: Clusterkonferenz ,,Zukunft der Pflege", 3., September 2020, N{\"u}rnberg}, volume = {Konferenzband Teil 1}, booktitle = {Kann Digital Pflege?: Clusterkonferenz ,,Zukunft der Pflege", 3., September 2020, N{\"u}rnberg}, address = {K{\"o}nigstetten, {\"O}sterreich}, issn = {2710-3048}, pages = {57 -- 61}, abstract = {Vorgestellt wird das Forschungsvorhaben des interdisziplin{\"a}ren Forschungsprojekts „DeinHaus 4.0 - Telepr{\"a}senzroboter f{\"u}r die Pflege und Unterst{\"u}tzung von Schlaganfallpatientinnen und -patienten (TePUS)". {\"U}ber geeignete Robotersysteme sollen den Proband*innen individuell abgestimmte Angebote aus den Bereichen Telenursing und Teletherapie zur Verf{\"u}gung gestellt werden. Hierbei werden einerseits Telepr{\"a}senzsitzungen durchgef{\"u}hrt, anderseits kommen verschiedene Apps zum Einsatz. Die Interventionen werden mittels eines Mixed-Methods-Ansatzes evaluiert. Begleitend werden Technikakzeptanz und Nutzungsbereitschaft untersucht.}, subject = {Schlaganfall}, language = {de} } @incollection{GrunowPfingstenBorgetto, author = {Grunow, Dieter and Pfingsten, Andrea and Borgetto, Bernhard}, title = {Selbsthilfe}, series = {Handbuch Gesundheitswissenschaften}, booktitle = {Handbuch Gesundheitswissenschaften}, editor = {Hurrelmann, Klaus and Razum, Oliver}, edition = {6. durchgesehene Auflage}, publisher = {Beltz}, address = {Weinheim}, isbn = {9783779943549}, pages = {961 -- 983}, abstract = {Die Gesundheitsversorgung kommt ohne die Eigenverantwortung, Selbsthilfe und aktive Mitarbeit der Patient*innen nicht aus. Die medizinische und psychosoziale Versorgung st{\"o}ßt bei chronischen Erkrankungen und bei Behinderungen an ihre Grenzen. Zus{\"a}tzlich zu dem professionellen Versorgungssystem leisten daher individuelle und gemeinschaftliche Selbsthilfe einen wissenschaftlich insgesamt gut belegten, wichtigen Beitrag zur Krankheitsbew{\"a}ltigung und zur Verbesserung der Lebensqualit{\"a}t von Menschen mit chronischen Erkrankungen und Behinderungen; Belastungen und „Nebenwirkungen" scheinen sich in engen Grenzen zu halten. Neben gegenseitiger Hilfe in Selbsthilfegruppen geh{\"o}ren Interessenvertretung, Beratung und Information durch und f{\"u}r Betroffene, Kooperation mit dem Versorgungssystem und zunehmend virtuelle Selbsthilfe zu den wichtigsten Selbsthilfe-Aktivit{\"a}ten. Die gemeinschaftliche Selbsthilfe wird finanziell in erheblichem Umfang durch die gesetzlichen Krankenkassen gef{\"o}rdert. Viele Selbsthilfegruppen erhalten Unterst{\"u}tzung durch lokale Selbsthilfekontaktstellen und {\"u}berregionale Selbsthilfeorganisationen. Die gemeinschaftliche Selbsthilfe hat sich von einer anfangs prim{\"a}r emanzipativen und medizinkritischen Bewegung zu einem immer st{\"a}rker integralen Bestandteil des deutschen Gesundheitssystems entwickelt und ist damit facettenreicher geworden. Sie hat damit aber auch ihren Schwerpunkt auf eine Weise verschoben, dass ihre zuk{\"u}nftige Entwicklung im Spannungsfeld weiterer funktionaler Differenzierung und Institutionalisierung, Selbstaufl{\"o}sung und Neustart sowie als Ausl{\"o}ser f{\"u}r Anpassungsprozesse bei den anderen, sie umgebenden sozialen Systemen, diskutiert wird.}, subject = {Medizinische Versorgung}, language = {de} } @article{WulfWestnerSchoenetal., author = {Wulf, Frederik and Westner, Markus and Sch{\"o}n, Maximilian and Strahringer, Susanne and Loebbecke, Claudia}, title = {Cloud-Computing-Nutzung bei der Continental AG}, series = {Wirtschaftsinformatik \& Management}, volume = {13}, journal = {Wirtschaftsinformatik \& Management}, number = {4}, publisher = {Springer Nature}, issn = {1867-5905}, doi = {10.1365/s35764-021-00342-x}, pages = {302 -- 309}, abstract = {Dieser Artikel richtet sich an IT-F{\"u}hrungskr{\"a}fte, die die Nutzung von Cloud Computing (CC) in ihren Unternehmen f{\"o}rdern wollen. Eine Fallstudie des Konzerns Continental AG zeigt, wie Continental CC in großem Maßstab f{\"u}r die Organisation nutzbar machte. Das Unternehmen ging dabei in drei Schritten vor: Nach einer Experimentierphase wurde der Einsatz zunehmend professionalisiert und CC abschließend umfangreich nutzbar gemacht. Hieraus k{\"o}nnen drei Hand-lungsempfehlungen f{\"u}r F{\"u}hrungskr{\"a}fte abgeleitet werden: (1) die CC-Strategie nach dem Delivery-Modell differenzieren, (2) in die Integration von Infrastructure-as-a-Service (IaaS)- und Platform-as-a-Service (PaaS)-Anbietern investieren und (3) den Wissenstransfer innerhalb des Unternehmens f{\"o}rdern, um Ver{\"a}nderungen zu erm{\"o}glichen.}, subject = {Cloud Computing}, language = {de} } @article{ScheerKubowitschDendorferetal., author = {Scheer, Clara and Kubowitsch, Simone and Dendorfer, Sebastian and Jansen, Petra}, title = {Happy Enough to Relax? How Positive and Negative Emotions Activate Different Muscular Regions in the Back - an Explorative Study}, series = {Frontiers in Psychology}, volume = {Volume 12}, journal = {Frontiers in Psychology}, number = {May 2021}, publisher = {Frontiers Media}, issn = {1664-1078}, doi = {10.3389/fpsyg.2021.511746}, abstract = {Embodiment theories have proposed a reciprocal relationship between emotional state and bodily reactions. Besides large body postures, recent studies have found emotions to affect rather subtle bodily expressions, such as slumped or upright sitting posture. This study investigated back muscle activity as an indication of an effect of positive and negative emotions on the sitting position. The electromyography (EMG) activity of six back muscles was recorded in 31 healthy subjects during exposure to positive and negative affective pictures. A resting period was used as a control condition. Increased muscle activity patterns in the back were found during the exposure to negative emotional stimuli, which was mainly measured in the lumbar and thorax regions. The positive emotion condition caused no elevated activity. The findings show that negative emotions lead to increased differential muscle activity in the back and thus corroborate those of previous research that emotion affects subtle bodily expressions.}, language = {en} } @inproceedings{FigasKnoerlMoertlbaueretal., author = {Figas, Paula and Kn{\"o}rl, Susanne and M{\"o}rtlbauer, Stefanie and Sedelmaier, Yvonne and Schroll-Decker, Irmgard}, title = {Developing Software Engineering Education as a Didactical Discipline in its own right}, series = {1st European Conference on Software Engineering Education (ECSEE) at Seon Monastery, Germany}, booktitle = {1st European Conference on Software Engineering Education (ECSEE) at Seon Monastery, Germany}, editor = {Hagel, Georg and Mottok, J{\"u}rgen}, publisher = {Shaker Verlag}, pages = {1 -- 15}, abstract = {Simultaneously to the growing significance of the discipline software engineering (SE) also its education becomes more important. This reinforces the need of a theoretical foundation of software engineering education, but there is still a lack of scientifically justified didactical concepts. In the context of the project EVELIN (Experimental Improvement in Learning Software Engineer-ing) the authors want to give a decisive impulse for the development of a "Fachdidaktik software engineering" (FD-SE). In order to compile an adequate theoretical basis for a Fachdidaktik of software engineering "Allgemeine Did-aktik" (AD)1, its relation to "Fachdidaktik" (FD) in general, the special branch of science of software engineering and related scientific disciplines are dis-cussed. This analysis is used to justify the necessity of an autonomous scientific discipline Fachdidaktik software engineering which meets the challenges of teaching and learning software engineering. The main contributions of this pa-per are proposals on how this FD can be built scientifically upon AD, on the one hand, and how it can be implemented by specific didactical approaches for software engineering, on the other hand.}, subject = {Fachdidaktik}, language = {en} } @inproceedings{SerbunPorshynMuelleretal., author = {Serbun, Pavel and Porshyn, Vitali and M{\"u}ller, G{\"u}nter and Mingels, Stephan and L{\"u}tzenkirchen-Hecht, Dirk and Bachmann, Michael and D{\"u}sberg, Felix and Dams, Florian and Hofmann, Martin and Pahlke, Andreas and Prommesberger, Christian and Langer, Christoph and Ławrowski, Robert Damian and Schreiner, Rupert}, title = {Field emission behavior of Au-tip-coated p-type Si pillar structures}, series = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, booktitle = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, publisher = {IEEE}, issn = {2380-6311}, doi = {10.1109/IVNC.2016.7551516}, pages = {181 -- 182}, abstract = {Precisely aligned high-aspect-ratio (HAR) silicon tip arrays were fabricated using enhanced reactive ion etching with an inductively-coupled-plasma followed by a sharpening oxidation. A gold thin film was then sputtered only on the tips of the HAR structures. Field-emission (FE) properties from Au-coated HAR p-Si tip array cathodes have been systematically investigated by means of field emission scanning microscopy (FESM). A rather high efficiency of the HAR Si structures (71\% at 550 V), but limited homogeneous FE with currents of 1-600 nA might be correlated with the varying geometry of the tips and the presence of oxides. I-V measurements of single Au-coated HAR emitters revealed activation effects and the saturation current region at 3 nA. An increase of the saturation current by 4 orders of magnitude was observed during 20 hours of conditioning at constant voltage, which finally resulted in nearly reproducible FN curves with a ß-factor of 473. An excellent stability of the emission current of less than 1 \% was obtained during the additional long-time conditioning at constant voltage. Optical switching under halogen lamp illumination resulted in at least 2 times higher saturation currents and showed a linear dependence of the FE current on the light color temperature.}, language = {en} } @inproceedings{BachmannDamsDuesbergetal., author = {Bachmann, Michael and Dams, Florian and D{\"u}sberg, Felix and Hofmann, Martin and Pahlke, Andreas and Langer, Christoph and Ławrowski, Robert Damian and Prommesberger, Christian and Schreiner, Rupert}, title = {Extraction of the characteristics of limiting elements from field emission measurement data}, series = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, booktitle = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, publisher = {IEEE}, issn = {2380-6311}, doi = {10.1109/IVNC.2016.7551474}, pages = {81 -- 82}, abstract = {In this contribution we will present an algorithm to extract the characteristics of non-Fowler-Nordheim (FN) circuit elements from saturation limited field emission (FE) measurement data. The method for calculating the voltage drop on limiting circuit elements is based on circuit theory as well as Newton's method. Since no assumption on the limiting circuit is made, this method is applicable to any FE data showing saturation. To be able to determine the significance of any parameter output, the uncertainties of data and extracted parameters are fully taken into account throughout the algorithm. External serial resistors and a limiting p-doped substrate are analyzed, where the latter shows a diode-like behavior.}, language = {en} } @inproceedings{PrommesbergerLangerŁawrowskietal., author = {Prommesberger, Christian and Langer, Christoph and Ławrowski, Robert Damian and Schreiner, Rupert}, title = {Field emission from black silicon structures with integrated gate electrode}, series = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, booktitle = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, publisher = {IEEE}, issn = {2380-6311}, doi = {10.1109/IVNC.2016.7551532}, pages = {219 -- 220}, abstract = {Black silicon structures with integrated gate electrode were realized by using an improved fabrication process. An enhanced insulation layer was achieved by a combination of dry and wet oxidation, and a gold layer was evaporated as gate electrode. The black silicon structures were prepared with a RIE/ICP etching process at room temperature. Arrays of 16 and 100 apertures with buried p-doped black silicon whiskers have been fabricated. These structures have an emitter height of approximately 1.5 μm with tip radii between 5 nm and 30 nm. The whiskers are surrounded by the gate electrode in a distance of 1.5 μm. Integral field emission measurements yielded an onset voltage of 92 V for 16 apertures and 60 V for 100 apertures for an emission current of 1 nA. Maximum emission currents up to 0.2 μA were observed for the array with 100 apertures at a cathode voltage of 200 V. Stability measurements showed a current fluctuation of ± 21\% at a mean value of the emission current of 12 nA over a period of 30 minutes for 16 apertures with b-Si whiskers.}, language = {en} } @inproceedings{LangerPrommesbergerŁawrowskietal., author = {Langer, Christoph and Prommesberger, Christian and Ławrowski, Robert Damian and Schreiner, Rupert and Huang, Yifeng and She, Juncong}, title = {Gated p-Si field emission cathode applied in an ionization vacuum gauge}, series = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, booktitle = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, publisher = {IEEE}, issn = {2380-6311}, doi = {10.1109/IVNC.2016.7551500}, pages = {145 -- 146}, abstract = {A commercial Bayard-Alpert ionization vacuum gauge was equipped with a field emission electron source based on a cathode consisting of an array of 16 gated, p-doped, and DLC-coated Si-tips and characterized. An anode current of about 1.3 μA led to an ion current of 7 fA at 3×10 -7 mbar and 0.8 pA at 4×10 -5 mbar. Whereas at pressures higher than 4×10 -5 mbar the emission current of the electron source decreased, the ratio of ion and anode current remained linear. A nearly constant sensitivity of ~ 17 mbar -1 of the ionization vacuum gauge within the investigated pressure range was depicted.}, language = {en} } @inproceedings{ŁawrowskiLangerPrommesbergeretal., author = {Ławrowski, Robert Damian and Langer, Christoph and Prommesberger, Christian and Schreiner, Rupert}, title = {Field emission from three-dimensional epitaxial grown GaN-microrods}, series = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, booktitle = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, publisher = {IEEE}, issn = {2380-6311}, doi = {10.1109/IVNC.2016.7551477}, pages = {87 -- 88}, abstract = {A novel three-dimensional epitaxial technique allows on patterned substrates the realization of gallium nitride pillars, also known as nano- and microrods. The typical dimensions of the microrods are in the range of one micron for the radius of the hexagonal footprint and about 10 μm in height. The microrods consist of a semiconductor heterostructure with an n GaN core, a n-GaN shell, a p GaN shell and an intermediate quantum well layer. The field emission properties were investigated in diode configuration by integral field emission measurements in a vacuum chamber at pressures around 10 -9 mbar. The spacer was mica with a thickness of 50 μm. A metallized fine-meshed nitride grid (or a metallized Si-grid) was used as anode. A current of about 1 μA at a voltage of 1250 V (1750 V) was measured. An onset field of about 12.5 MV/m (20 MV/m) and field enhancement factors in the range of 200 to 500 (150 to 300) were found. The investigation with the fine-meshed grid showed an expected pronounced saturation region.}, language = {en} } @inproceedings{PrommesbergerŁawrowskiLangeretal., author = {Prommesberger, Christian and Ławrowski, Robert Damian and Langer, Christoph and Mecani, Mirgen and Huang, Yifeng and She, Juncong and Schreiner, Rupert}, title = {Field emission properties of ring-shaped Si ridges with DLC coating}, series = {Proc. SPIE 10248, Nanotechnology VIII, 102480H (30 May 2017)}, volume = {102480H}, booktitle = {Proc. SPIE 10248, Nanotechnology VIII, 102480H (30 May 2017)}, editor = {Tiginyanu (Ed.), Ion M.}, publisher = {Society of Photo-Optical Instrumentation Engineers (SPIE)}, doi = {10.1117/12.2265627}, abstract = {We report on the fabrication and the emission characterization of single ring-shaped Si ridges with a coating of diamond-like carbon (DLC). The reactive ion etching and the subsequent inductively coupled plasma step were adjusted to realize ring-shaped Si ridges with a height of 7.5 μm respectively 15 μm and an apex radius of 20 - 25 nm. The samples were coated with a DLC layer (thickness ≈ 2 - 5 nm) by a filtered cathodic vacuum arc deposition system in order to lower the work function of the emitter and to improve the field emission characteristics. The field emission characterizations were done in diode configuration with cathode and anode separated by a 50 μm thick mica spacer. A higher emission current was carried out for the ring-shaped Si ridge in comparison to the point-shaped Si tips due to the increased emission area. The highest emission current of 0.22 μA at 1000 V was measured on a DLC-coated sample with the highest aspect ratio. No degradation of the emission current was observed in the plateau regime during a measurement period of 6 h. Finally, no decreasing performance of the field emission properties was found due to changes in the geometry or destructions.}, language = {en} } @inproceedings{ThumannWagnerSucketal., author = {Thumann, Philipp and Wagner, Marcus and Suck, Bertram and Meinhardt, Josef and Marburg, Steffen}, title = {Explicit and Implicit FE Simulations of Material Tests for Subsequent Durability Analyses}, series = {11th European LS-DYNA Conference, Salzburg}, booktitle = {11th European LS-DYNA Conference, Salzburg}, abstract = {Because of increased stroke rates the loads on forming tools increase too. To ensure a save design of components, durability analyses are intended. For this, simulation results from FE analyses are necessary. Therefore, it is desirable to use elements with quadratic function, because of a good stress approximation.The goal of the described investigation is to show if calculation results created by LS-DYNA [1] can be used for durability analyses. Especially the use of quadratic elements is investigated. For the evaluation, on the one hand explicit FE analyses of a special durability test are carried out. These analyses are validated by available test data. To create results for later durability analyses further FE analyses with implicit time discretisation are carried out. In this paper results of the investigations are presented and evaluated critically.}, language = {en} } @inproceedings{ThumannSwidergalWagner, author = {Thumann, Philipp and Swidergal, Krzysztof and Wagner, Marcus}, title = {Calculation and validation of material tests with specimens made out of filled elastomers}, series = {10th European LS-DYNA Conference 2015, W{\"u}rzburg}, booktitle = {10th European LS-DYNA Conference 2015, W{\"u}rzburg}, abstract = {In deep-drawing dies for steel sheet parts of car bodies huge masses are moved. To prevent vibrations, which occur by sudden acceleration or stopping of those masses, elastomeric tubular dampers [1] are used. The dampers are made out of carbon filled elastomers. A good knowledge about the material behaviour of metals is available. But for the numerical investigation of complete deep-drawing dies the elastomeric dampers must be taken into account, too. To characterize the material behaviour of the elastomers tensile tests and pressure tests were carried out. The received material data from the tests were read into LS-DYNA [2]. Simulation models of the tensile test and the pressure test were created for LS-DYNA according to the real dimensions and boundary conditions. For validation purposes, calculations of loading cycles were done to enable a comparison between test data and simulation results. For the calculations the implemented material model *MAT_SIMPLIFIED_RUBBER_WITH_DAMAGE (*MAT_183) was used. The comparison shows a good fitting between the test data and the calculation results with respect to the mechanical material behaviour by using this material model in single loading cases. The settings from the simulations of material tests were transferred to simulations of dampers, which are used in deep-drawing dies.}, language = {en} } @inproceedings{KochThumannWagner, author = {Koch, F. and Thumann, Philipp and Wagner, Marcus}, title = {Simulation with implicit time integration of high loaded areas of a forming tool for large presses using LS-DYNA}, series = {13. LS-DYNA Forum 2014, 6.-8. Oktober, Bamberg}, booktitle = {13. LS-DYNA Forum 2014, 6.-8. Oktober, Bamberg}, language = {en} } @inproceedings{MecklLubesederZausingeretal., author = {Meckl, D. and Lubeseder, Christian and Zausinger, C. and Wurmb, Ingo von and Meinhardt, Josef and Swidergal, Krzysztof and Wagner, Marcus}, title = {Simulation of press dies for large presses using the flexible multibody dynamics in Recurdyn}, series = {4th RecurDyn TechnologyDays 2014, M{\"u}nchen}, booktitle = {4th RecurDyn TechnologyDays 2014, M{\"u}nchen}, language = {en} } @inproceedings{BachmannDamsDuesbergetal., author = {Bachmann, Michael and Dams, Florian and D{\"u}sberg, Felix and Hofmann, Martin and Pahlke, Andreas and Langer, Christoph and Ławrowski, Robert Damian and Prommesberger, Christian and Schreiner, Rupert}, title = {Control of the electron source current}, series = {International Vacuum Nanoelectronics Conference (IVNC), 30th, 2017, Regensburg}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 30th, 2017, Regensburg}, publisher = {IEEE}, doi = {10.1109/IVNC.2017.8051550}, pages = {66 -- 67}, abstract = {A control circuit to stabilize the flux of electrons transmitted through an extractor electrode is presented. By controlling the emission current a fluctuation with a standard deviation of 0.015\% is observed. However, the achievable stability of the transmitted electron current is limited due to a variation of the extraction grid current ratio showing a standard deviation of 4.33\%. By regulating the difference of the emission current and the extraction grid current an improved stability of the transmitted electron current down to a standard deviation of 0.280\% is observed. Even with operation at 2 × 10 -5 mbar a standard deviation of 0.558\% is achieved.}, language = {en} } @inproceedings{PrommesbergerLangerŁawrowskietal., author = {Prommesberger, Christian and Langer, Christoph and Ławrowski, Robert Damian and Schreiner, Rupert}, title = {Benzocyclobutene as a novel integrated spacer material in a field emission electron source}, series = {International Vacuum Nanoelectronics Conference (IVNC), 30th, 2017, Regensburg}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 30th, 2017, Regensburg}, publisher = {IEEE}, doi = {10.1109/IVNC.2017.8051605}, pages = {192 -- 193}, abstract = {For the realization of a miniaturized field emission electron source we tested benzocyclobutene (BCB) as a new spacer material between cathode and anode. We fabricated black silicon emitters and characterized the emission behavior with an integrated 5 μm thin and large-area spacer of BCB. The integrated BCB layer allows the realization of a compact electron source with only two components consisting of a cathode with BCB and a grid. The comparison with other spacer materials like polyimide (25 μm thickness) or mica (50 μm thickness) revealed for the cathode with BCB a significantly reduced operational voltage of 240 V for a field emission current of 1 μA.}, language = {en} } @inproceedings{SwidergalLubesederWurmbetal., author = {Swidergal, Krzysztof and Lubeseder, Christian and Wurmb, Ingo von and Meinhardt, Josef and Wagner, Marcus and Marburg, Steffen}, title = {Effiziente Methode zur Bestimmung von dynamischen strukturellen Belastungen in Großpresswerkzeugen}, series = {36. EFB-Kolloquium Blechverarbeitung 2016, Fellbach}, booktitle = {36. EFB-Kolloquium Blechverarbeitung 2016, Fellbach}, language = {de} } @techreport{ThumannSwidergalWagner, author = {Thumann, Philipp and Swidergal, Krzysztof and Wagner, Marcus}, title = {Experimentelle Ermittlung von Materialkennwerten und numerische Untersuchungen an einem gef{\"u}llten Elastomer}, series = {Forschungsbericht 2015 / Ostbayerische Technische Hochschule Regensburg}, journal = {Forschungsbericht 2015 / Ostbayerische Technische Hochschule Regensburg}, editor = {Baier, Wolfgang}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-00-048589-3}, pages = {49 -- 50}, language = {de} } @article{SwidergalLubesederWurmbetal., author = {Swidergal, Krzysztof and Lubeseder, Christian and Wurmb, Ingo von and Lipp, Arnulf and Meinhardt, Josef and Wagner, Marcus and Marburg, Steffen}, title = {Experimental and numerical investigation of blankholder's vibration in a forming tool}, series = {Production Engineering - Research and Development}, volume = {9}, journal = {Production Engineering - Research and Development}, number = {5-6}, publisher = {Springer}, issn = {0944-6524}, doi = {10.1007/s11740-015-0640-9}, pages = {634}, abstract = {In order to achieve the energy and efficiency goals in modern automotive press shops, press systems with increasingly high stroke rates are being implemented (Meinhardt in proceedings of ACI forming in car body engineering. Bad Nauheim, Germany 2012). As a side effect, the structural dynamic loads on the press and especially on the forming tool increase. Hence, to design reliable and withstanding forming tools, a detailed knowledge of the vibrations and resulting critical loads is essential. In this paper, the main focus is put on the vibration of the blankholder—the heaviest moving component in the forming tool. To predict those vibrations, a coupled multibody-finite element simulation (MBS-FEM) is conducted, which combines rigid and elastic modeling approaches. Also, an experimental validation of the blankholder vibration under operational load is carried out. To compare the numerical and experimental results—both in time and frequency domain—an 1/3-octave analysis of a blankholder's vibrational speed is performed. The test measurements agree well with the MBS-FEM simulation.}, language = {en} } @article{ThumannMarburgMeinhardtetal., author = {Thumann, Philipp and Marburg, Steffen and Meinhardt, Josef and Saubiez, Jean-Marc and Hoogen, Michael and Suck, Bertram and Wagner, Marcus}, title = {Frequency Dependent Fatigue Strength Investigations on Tempered Steel and Nodular Cast Iron}, series = {steel research international}, volume = {90}, journal = {steel research international}, number = {7}, publisher = {Wiley}, doi = {10.1002/srin.201800620}, abstract = {This paper presents experimental fatigue tests on specially shaped specimens made from quenched and tempered steel 42CrMoS4 and nodular cast iron EN-GJS-600-3. The specimens are geometrically designed to resemble actual subcomponents of forming and cutting dies for sheet metal manufacturing. These subcomponents have failed in the past.Experiments are carried out using a fictive load-time function, which is a modification of an actually measured load curve and has variable mean and amplitude values. This first test series serves as a general validation of a subsequent fatigue analysis. A second test series is carried out with constant mean and amplitude values with a load ratio 𝑅≈0. Here, the load frequencies in the individual test runs are varied between f = 5 Hz and f = 45 Hz in order to investigate the influence of the frequency. Both series are performed on a servo-hydraulic testing machine.The experimental data is then statistically evaluated. The values for the scatter correlate with data from the literature. The data from the test series with the fictive load-time function can thus be used for subsequent validation of a fatigue calculation, which will be addressed in a future publication. Most significant are the findings from the second series of experiments with varied load frequencies, as a significant frequency influence could be detected. Furthermore, the hardening and softening behavior under cyclic loading and the fracture behavior of the materials are analyzed and compared with data from the literature.}, language = {en} } @inproceedings{SwidergalWagnerLubesederetal., author = {Swidergal, Krzysztof and Wagner, Marcus and Lubeseder, Christian and Wurmb, Ingo von and Meinhardt, Josef and Marburg, Steffen}, title = {Finite element simulation of blankholder's lift-off in a deep drawing tool using Abaqus/Standard}, series = {SIMULIA Community Conference, 19 - 21 May 2015, Berlin, Germany}, booktitle = {SIMULIA Community Conference, 19 - 21 May 2015, Berlin, Germany}, abstract = {In the deep drawing tools for forming car body parts, heavy blankholders are used to prevent buckling and wrinkling of the blank. During each press cycle, those large masses need to be lifted, raising thereby the structural dynamic load on the deep drawing tool and on the press. Therefore a detailed knowledge about the blankholder's lift-off event is essential for an accurate and robust design of forming tools. In this paper, a dynamic finite element method (FEM) simulation of a blankholder's lift-off in a selected automotive deep drawing tool is presented enabling identification of regions of critical stresses. The FEM model is built within the Abaqus/CAE environment and solved with Abaqus/Standard. Each dynamic analysis is preceded by a static analysis where the gravity load is applied and the lifting bolts are pre-stressed. A special emphasis is put on modeling the elastomer dampers, which are installed between lifting bolts and the blankholder to avoid hard impacts during the lift-off event. Those dampers are modelled using a hyperelastic material with hysteresis. In addition, an experimental validation of a blankholder's vibration under operating loading was carried out. The simulation results are in good agreement with the measurements.}, language = {en} } @article{SittlMarburgWagner, author = {Sittl, Christopher and Marburg, Steffen and Wagner, Marcus}, title = {Application of a Krylov subspace method for an efficient solution of acoustic transfer functions}, series = {Mechanical Systems and Signal Processing}, volume = {148}, journal = {Mechanical Systems and Signal Processing}, publisher = {Elsevier}, doi = {10.1016/j.ymssp.2020.107135}, abstract = {Solving acoustic radiation problems, arising from systems including fluid-structure interaction, is of interest in many engineering applications. Computing frequency response functions over a large frequency range is a concern in such applications. A method which solves the Helmholtz equation for multiple frequencies in one step is the matrix-Pad{\´e}-via-Lanczos connection for unsymmetric systems, as presented by Wagner et al. [1]. The present work is based on Ref. [1] and presents a method for efficiently computing frequency responses over a frequency range for coupled structural-acoustic problems, where the structure and the acoustic near field are discretized with finite elements and an analytical Dirichlet-to-Neumann map approximates the far field. The method is based on a Krylov-subspace projection technique which derives a matrix-valued Pad{\´e} approximation for a restricted area in the near field and the pressure field on a spherical boundary. On the spherical boundary, where the finite domain is truncated, the non-local modified Dirichlet-to-Neumann operator is applied as a low-rank update matrix. The present contribution extends this method and incorporates new techniques for a more stable model reduction through the Lanczos algorithm and a novel weighted adaptive windowing technique. Further, structural damping is incorporated, for computing the acoustic radiation of a harmonically excited plate. These computed results are compared with acoustic measurements in an anechoic chamber and verified with computational results obtained with a commercial code that uses the perfectly matched layer method.}, language = {en} } @inproceedings{SwidergalLubesederWurmbetal., author = {Swidergal, Krzysztof and Lubeseder, Christian and Wurmb, Ingo von and Meinhardt, Josef and Wagner, Marcus and Marburg, Steffen}, title = {Vibration analysis of an automotive forming tool using coupled MBS-FEM simulation and experimental validation}, series = {Proceedings of the 26th International Conference on Noise and Vibration Engineering (ISMA2014), Leuven, Belgium}, booktitle = {Proceedings of the 26th International Conference on Noise and Vibration Engineering (ISMA2014), Leuven, Belgium}, pages = {2931 -- 2942}, abstract = {To improve efficiency in automotive press shops, press systems with increasingly high stroke rates are beingimplemented, raising thereby the structural dynamic load on the press and especially on the forming tool. Adetailed knowledge of the vibrations and resulting critical loads is thus essential for accurate and reliable de-signs of forming tools. In this paper, multibody simulation (MBS) of a selected automotive tool is presentedenabling the identification of the vibration of its components. Starting from a pure rigid modelling approach,the MBS model is extended by adding finite element (FE) component to allow extra flexibility in the sys-tem. As an example, a detailed vibrational analysis - both in time and frequency domain - is performed ona blankholder. Also an experimental validation of a blankholder vibration under operational load is carriedout, with test signal data gained by piezoelectric accelerometers.}, language = {en} } @inproceedings{ŁawrowskiLangerPrommesbergeretal., author = {Ławrowski, Robert Damian and Langer, Christoph and Prommesberger, Christian and Schreiner, Rupert}, title = {Microrods and microlines by three-dimensional epitaxially grown GaN for field emission cathodes}, series = {International Vacuum Nanoelectronics Conference (IVNC), 30th, 2017, Regensburg}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 30th, 2017, Regensburg}, publisher = {IEEE}, doi = {10.1109/IVNC.2017.8051576}, pages = {130 -- 131}, abstract = {The three-dimensional epitaxial technique allows the realization of gallium nitride lines in addition to the rods. To optimize the properties of GaN-based field emission cathodes further investigations and an improvement of the epitaxial process were performed. The microrods and microlines consist of a one-order higher n-doped gallium nitride in comparison to the gallium nitride layer on the sapphire substrate. The typical height of the microrods and -lines is about 5 μm. The field emission properties of these structures were investigated in diode configuration by integral field emission measurements at pressures below 10 -9 mbar. For the microrods (microlines) a voltage of 1100 V (2000 V) was measured for a field emission current of about 0.5 μA with an onset field of about 12 MV/m (24 MV/m). Furthermore, the field enhancement factors for microrods and -lines are in the range of 300 and 200, respectively.}, language = {en} } @inproceedings{ŁawrowskiLangerPrommesbergeretal., author = {Ławrowski, Robert Damian and Langer, Christoph and Prommesberger, Christian and Schreiner, Rupert}, title = {Light emitting diodes based on three-dimensional epitaxial grown crystalline GaN rods}, series = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, booktitle = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, publisher = {VDE-Verlag}, address = {M{\"u}nchen}, isbn = {978-3-8007-4491-6}, pages = {131 -- 134}, language = {en} } @inproceedings{SerbunPorshynMuelleretal., author = {Serbun, Pavel and Porshyn, Vitali and M{\"u}ller, G{\"u}nter and L{\"u}tzenkirchen-Hecht, Dirk and Prommesberger, Christian and Langer, Christoph and Ławrowski, Robert Damian and Schreiner, Rupert}, title = {Field emission behavior of single n- and p-type black Si pillar structures}, series = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, publisher = {IEEE}, doi = {10.1109/IVNC.2018.8520292}, pages = {1-2}, abstract = {We have investigated the properties of single n- and p-type black silicon (b-Si) pillars with a height of 20 μ m under strong electric field and halogen lamp or laser illumination. For both type of b-Si pillar structures, I-V measurements revealed strong activation effects, which consisted in sudden current increases during the first up/down voltage sweeps. The maximum reproducible emission current from a single n-type b-Si pillar structure was about 15 μ A. A pronounced saturation region at 240 nA was observed for a single p-type b-Si pillar. The current fluctuation over time showed a standard deviation of 28\% and 2.5\% for n- and p-type single b-Si pillar structures, respectively. Optical switching under halogen lamp illumination resulted in at least 3 times higher saturation currents and showed a linear dependence of the FE current on the laser power.}, language = {en} } @inproceedings{PrommesbergerLangerSchreiner, author = {Prommesberger, Christian and Langer, Christoph and Schreiner, Rupert}, title = {Stable and low noise field emission from single p-type Si-tips}, series = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, publisher = {IEEE}, doi = {10.1109/IVNC.2018.8520018}, pages = {1-2}, abstract = {Single gated p-type Si-tips with two different tip radii were fabricated. An emission current of 2.40 μA was measured for the sharp-edged tip at a voltage of 170 V. In contrast, a stable and reproducible emission behavior was observed with an increased tip radius resulting in a pronounced saturation region between 90 V and 150 V, but merely an emission current of 0.55 μA at 150 V. More remarkable is the stable emission behavior with fluctuation of ± 4 \% during a measurement period of 30 minutes. The integral emission current in a homogeneous tip array (16 emitters) showed nearly the same I-V characteristics compared to the single tip and is therefore, most dominated by only a stable single tip in the array.}, language = {en} } @inproceedings{ŁawrowskiLangerSchreineretal., author = {Ławrowski, Robert Damian and Langer, Christoph and Schreiner, Rupert and Sellmair, Josef}, title = {Nano Emitters on Silicon Pillar Structures generated by a Focused Electron Beam Induced Deposition}, series = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, publisher = {IEEE}, doi = {10.1109/IVNC.2018.8520059}, pages = {1-2}, abstract = {Nano emitters were deposited by focused electron beam induced deposition of Trimethyl-(methylcyclopentadienyl)platinum(IV) on top of silicon pillars. The nano emitters were exactly positioned in the center on the top of up to four pillars of a quadratic arranged array of sixteen pillars with a pitch of 50 μm. Integral field emission measurements were performed in a diode configuration with a 50 μm mica spacer in a vacuum chamber at pressures of about 10 -9 mbar. The Fowler-Nordheim plots show a linear behavior, like expected for an n-type silicon material and a metal needle. The I-V measurement of the most promising sample shows an integral emission current up to 2 μm at a voltage of 600 V (12 MV/m) and an onset voltage for a current of 1 nA of about 300 V.}, language = {en} } @inproceedings{EdlerHanschPrommesbergeretal., author = {Edler, Simon and Hansch, Walter and Prommesberger, Christian and Schreiner, Rupert}, title = {Influence of adsorbates on the performance of a field emitter array in a high voltage triode setup}, series = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, publisher = {IEEE}, doi = {10.1109/IVNC.2018.8520214}, pages = {1-2}, abstract = {The influence of residual gas pressure on the characteristics of black-Silicon field emitter arrays in a high voltage triode setup is investigated. I-Vcharacteristics at different pressure levels show a decrease of emission current with rising pressure. This can be explained by an increase of the work function and charging of the emitter surface due to adsorbates. The initial characteristics can be restored by heating the FEA up to 110 °C during electron emission. This regeneration procedure enables an extension of the lifetime from about 20 h to 440 h at a residual gas pressure of 10 -5 mbar.}, language = {en} } @inproceedings{LangerHausladenPrommesbergeretal., author = {Langer, Christoph and Hausladen, Matthias and Prommesberger, Christian and Ławrowski, Robert Damian and Bachmann, Michael and D{\"u}sberg, Felix and Pahlke, Andreas and Shamonin (Chamonine), Mikhail and Schreiner, Rupert}, title = {Field emission current investigation of p-type and metallized silicon emitters in the frequency domain}, series = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, publisher = {IEEE}, doi = {10.1109/IVNC.2018.8520127}, pages = {1-2}, abstract = {We investigated two different field emitter arrays consisting of 10×10 p-type and 10×10 undoped Au-coated high aspect ratio silicon tips. The I-V characterization of the p-type sample showed a pronounced saturation for voltages higher than 500 V and a maximum emission current of 39 nA. The metallized sample revealed a FN-like emission up to several μA. The metallized and the p-type sample operating below the saturation region showed high current fluctuations of ±16\%. Whereas, the metallized sample with current regulation and the p-type sample in the saturation yielded a current stability of ±0.4\% and ±0.3\%, respectively. Investigations in the frequency domain revealed the for field emission typical 1/f-noise. By operating in the saturation region (p-type sample) or using an emission current regulation (metallized sample) the noise level was reduced by at least 20 dB. Finally, the p-type sample was illuminated by a light emitting diode to increase and modulate the emission current in the saturation region. The emission current was increased by a factor of 3.7 to 145 nA. With this configuration we emulated an unstable emission behavior and evaluated the performance of our emission current regulation circuit.}, language = {en} } @inproceedings{SerbunPorshynLuetzenkirchenHechtetal., author = {Serbun, Pavel and Porshyn, Vitali and L{\"u}tzenkirchen-Hecht, Dirk and Prommesberger, Christian and Langer, Christoph and Ławrowski, Robert Damian and Schreiner, Rupert}, title = {Photosensitivity of single silicon high-aspect-ratio tips with different doping levels}, series = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, publisher = {IEEE}, doi = {10.1109/IVNC.2018.8520288}, pages = {1-2}, abstract = {Photosensitivity of single lightly p-doped, highly p-doped, with an integrated p/n junction and intrinsic high-aspect-ratio (HAR) silicon tips was investigated in an ultra-high vacuum environment. The current-voltage characteristics (I-V) of the lightly doped p-type HAR tips showed a characteristic current saturation at around 10-12 nA, whereas the HAR Si tips with p/n junction showed similar saturation phenomena, however, at much smaller current values starting at ~20-30 pA. Optical switching under a halogen lamp illumination resulted in at least 2-4 times higher saturation currents and showed a linear dependence between the illumination power and the FE current, for both types of structures. In case of the highly p-doped HAR tips optical current switching effects, i. e. current saturation, were observed at rather low current levels 1-2 pA. Intrinsic HAR Si-tips showed relative unstable field emission behavior without a clear evidence of the photosensitivity.}, language = {en} } @misc{Schubert, author = {Schubert, Martin J. W.}, title = {Verfahren zur Simulation von Netzwerken auf einer ereignisgesteuerten Zeitachse mittels verteilter, lokaler Iteration}, language = {de} } @misc{DeclerqSchubert, author = {Declerq, Michel and Schubert, Martin J. W.}, title = {Circuit Interm{\´e}diaire entre un Circuit Logique {\`a} Basse-Tension et un Etage de Sortie {\`a} Haute-Tension R{\´e}alis{\´e}s dans une Technologie CMOS Standard}, abstract = {La pr{\´e}sente invention concerne un circuit interm{\´e}diaire entre un circuit logique a basse tension et un {\´e}tage de sortie {\`a} haute tension r{\´e}alis{\´e}s dans une technologie CMOS standard. L'{\´e}tage de sortie (20) comporte deux transistors respectivement {\`a} canal N et {\`a} canal P, r{\´e}alis{\´e}s selon une technologie CMOS standard. Le circuit interm{\´e}diaire comporte un translateur de niveau de tension (21) coupl{\´e} entre un circuit logique d'entr{\´e}e SL et ledit {\´e}tage de sortie (20). Ce translateur de niveau de tension (21) est r{\´e}alis{\´e} selon une technologie CMOS standard et est constitu{\´e} d'au moins deux blocs de base identiques formant des miroirs de tension interconnect{\´e}s de fa{\c{c}}on crois{\´e}e. Ce circuit est utilis{\´e} pour commander des transducteurs, des {\´e}crans plasma et des actionneurs {\´e}lectrom{\´e}caniques.}, language = {fr} } @techreport{HedererWagner, author = {Hederer, Sebastian and Wagner, Marcus}, title = {Entwicklung und Implementierung eines konstitutiven Modells zur Beschreibung der Plastizit{\"a}t von Dualphasenst{\"a}hle bei großen plastischen Deformationen}, series = {Forschungsbericht 2018 / Ostbayerische Technische Hochschule Regensburg}, journal = {Forschungsbericht 2018 / Ostbayerische Technische Hochschule Regensburg}, editor = {Baier, Wolfgang}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {9783981820911}, pages = {68 -- 69}, language = {de} } @inproceedings{SwidergalLubesederWurmbetal., author = {Swidergal, Krzysztof and Lubeseder, Christian and Wurmb, Ingo von and Lipp, Arnulf and Meinhardt, Josef and Wagner, Marcus and Marburg, Steffen}, title = {Structural analysis of an automotive forming tool for large presses using LS-DYNA}, series = {10th European LS-DYNA Conference, W{\"u}rzburg}, booktitle = {10th European LS-DYNA Conference, W{\"u}rzburg}, language = {en} } @inproceedings{WeghWagnerGaudlitzetal., author = {Wegh, Niels and Wagner, Marcus and Gaudlitz, Daniel and Finckh, Hermann and Klein, Markus}, title = {Numerical Simulation of Filling Process in Resin Transfer Molding}, series = {13th International Conference on Flow Processes in Composites Materials (FPCM-13), Kyoto, Japan}, booktitle = {13th International Conference on Flow Processes in Composites Materials (FPCM-13), Kyoto, Japan}, language = {en} } @inproceedings{GeithWagner, author = {Geith, Markus A. and Wagner, Marcus}, title = {Numerical Analysis Of Stent Delivery Systems During Pre- And Intraoperative Processes}, series = {Deutsches LS-DYNA Forum 2018, Bamberg}, booktitle = {Deutsches LS-DYNA Forum 2018, Bamberg}, language = {en} } @inproceedings{SwidergalThumannLubesederetal., author = {Swidergal, Krzysztof and Thumann, Philipp and Lubeseder, Christian and Wurmb, Ingo von and Meinhardt, Josef and Wagner, Marcus and Marburg, Steffen}, title = {Modeling and simulation of carbon black filled elastomer damper using LS-DYNA}, series = {LS-DYNA Forum 2014, Bamberg}, booktitle = {LS-DYNA Forum 2014, Bamberg}, language = {en} } @article{LedentsovDuesterVolketal., author = {Ledentsov, Dmitry and D{\"u}ster, Alexander and Volk, Wolfram and Wagner, Marcus and Heinle, Ingo and Rank, Ernst}, title = {Model adaptivity for industrial application of sheet metal forming simulation}, series = {Finite Elements in Analysis and Design}, volume = {46}, journal = {Finite Elements in Analysis and Design}, number = {7}, doi = {10.1016/j.finel.2010.02.006}, pages = {585 -- 600}, abstract = {finite element simulation of sheet metal forming, shell elements are widely used. The limits of applicability of the shell elements are sometimes disregarded, which leads to an error in predictions of important values such as springback geometry. The underlying kinematic assumptions of the shell elements do not hold where the thickness of In the metal sheet approaches the value of the radius of curvature. Complex three-dimensional material behavior effects cannot be represented precisely as the result of the simplified kinematics. Here we present a model adaptivity scheme based on a model error indicator. The model-adaptive technique presented in this paper aides to resolve only the critical areas of the structure with a three-dimensional discretization while keeping reasonable computational cost by utilizing shell elements for the rest of the structure. The model error indicator serves as a guide for subsequent automatic adaptive re-meshing of the work-piece followed by a model-adaptive finite element analysis. The accuracy of the approximation obtained by the model-adaptive technique coincides well with that of a more expensive solution obtained with solid elements only.}, language = {en} } @misc{Dendorfer, author = {Dendorfer, Sebastian}, title = {The influence of modeling parameters in the AnyBody Modeling System on muscle and joint loading in the shoulder}, series = {International Shoulder Group Meeting}, volume = {05}, journal = {International Shoulder Group Meeting}, language = {en} } @misc{SchubertSeign, author = {Schubert, Martin J. W. and Seign, Stefan}, title = {Arrangement for Measuring Capacitance}, language = {en} } @article{LeeSchubertOoietal., author = {Lee, Wai-Kong and Schubert, Martin J. W. and Ooi, Boon Yaik and Ho, Stanley Jian-Qin}, title = {Multi-source energy harvesting and storage for floating wireless sensor network nodes with Long Range Communication Capability}, series = {IEEE Transactions on Industry Applications}, volume = {54}, journal = {IEEE Transactions on Industry Applications}, number = {3}, publisher = {IEEE}, doi = {10.1109/TIA.2018.2799}, pages = {2606 -- 2615}, abstract = {Wireless sensor networks are widely used for environmental monitoring in remote areas. They are mainly composed of wireless sensor nodes, usually powered by batteries with limited capacity, but are expected to communicate in long range and operate for extended time periods. To overcome these limitations, many energy harvesting techniques are proposed to power wireless nodes for prolonged operation, whereas multihop techniques are utilized to extend the communication range. In this paper, a novel floating device with multisource energy harvesting technology that can be used as a wireless sensor node is proposed. The long range communication between wireless sensor nodes and a gateway is established through LoRa technology. In addition to conventional solar panels, an energy harvesting technique based on thermoelectric generators exploiting thermal differences created between water surface and materials exposed to sunlight is proposed. Energy generated from photovoltaic and thermoelectric generators is combined to power the wireless sensor node. This floating device consumes 6.6216 Wh per day when used as a wireless sensor node for the collection and transmission of environmental data. The sensor node can operate on a water surface for at least 9.6 days when it is not exposed to sunlight. During a sunny day, the floating device can harvest 8.375 Wh from solar panels and 0.425 Wh from thermoelectric generation. In other words, the floating device harvests sufficient energy to be self-sustaining during sunny days.}, language = {en} } @inproceedings{LeeSchubertHo, author = {Lee, Wai-Kong and Schubert, Martin J. W. and Ho, Stanley Jian-Qin}, title = {Multi-source energy harvesting and storage for floating wireless-sensor-network nodes}, series = {2016 IEEE Industrial Electronics and Applications Conference (IEACon 2016), 20.-22. Nov. 2016, Kota Kinabalu, Malaysia}, booktitle = {2016 IEEE Industrial Electronics and Applications Conference (IEACon 2016), 20.-22. Nov. 2016, Kota Kinabalu, Malaysia}, isbn = {9781509009268}, language = {en} } @inproceedings{Schubert, author = {Schubert, Martin J. W.}, title = {System Contemplations for Precision Irrigation in Agriculture}, series = {AIP Conference Proceedings}, volume = {1828}, booktitle = {AIP Conference Proceedings}, number = {1}, isbn = {9780735414969}, doi = {10.1063/1.4979393}, abstract = {This communication contemplates political, biological and technical aspects for efficient and profitable irrigation in sustainable agriculture. A standard for irrigation components is proposed. The need for many, and three-dimensionally distributed, soil measurement points is explained, thus enabling the control of humidity in selected layers of earth. Combined wireless and wired data transmission is proposed. Energy harvesting and storage together with mechanical sensor construction are discussed.}, language = {en} } @article{Schubert, author = {Schubert, Martin J. W.}, title = {An Analog Node Model for VHDL Based Simulation of RF Integrated Circuits}, series = {IEEE Transactions on Circuits and Systems I, Regular Papers}, volume = {56}, journal = {IEEE Transactions on Circuits and Systems I, Regular Papers}, number = {12}, doi = {10.1109/TCSI.2009.2027799}, pages = {2717 -- 2727}, abstract = {This paper describes a very-high-speed integrated-circuit hardware description language (VHDL)-based analog-node model, an associated driver component for the mixed-signal event-driven (MixED) simulation technique, and some primitive device models applied to radio-frequency integrated circuits. With the presented MixED method, analog circuits are modeled as a composition of controlled sources. Unlike other VHDL-based analog simulation methods, these MixED sources compute not only a real number representing an output voltage but also an output impedance. This allows the outputs of several MiXED sources to be connected in order to drive the same node signal n . The voltage of this record-type signal is automatically computed at its element n . u by resolution functions in compliance with Kirchhoff's current law. The data structure of the node signal n , its self-defined resolution functions, and an associated driver component are presented and discussed to meet different simulation requirements, such as speed, versatility, current accuracy, and adaptive time stepping. Several examples demonstrate how to behaviorally model mixed-signal components with this method with an emphasis on the simulation of a heterodyne receiver. Simulation speeds are compared to VHDL-AMS tools.}, language = {en} } @inproceedings{Schubert, author = {Schubert, Martin J. W.}, title = {VHDL Based Simulation of a Delta-Sigma A/D Converter Clocked with a Phase-Locked Loop}, series = {Design, Automation and Test in Europe, DATE'2001 Conference, March 13-16 2001, Munich}, booktitle = {Design, Automation and Test in Europe, DATE'2001 Conference, March 13-16 2001, Munich}, abstract = {The VHDL based mixed-signal event-driven (MixED) simulation method is employed to simulate a comprehensive system containing a number of mixed-signal building blocks: an analog waveform generator, a phase-locked loop and two ∆Σ modulators for A/D conversion.}, language = {en} }