@incollection{PfingstenBorgetto, author = {Pfingsten, Andrea and Borgetto, Bernhard}, title = {Akademisierung der therapeutischen Gesundheitsberufe}, series = {Perspektive Gesundheit 2030. Gesellschaft, Politik, Transformation}, booktitle = {Perspektive Gesundheit 2030. Gesellschaft, Politik, Transformation}, editor = {Baas, Jens}, publisher = {Medizinisch Wissenschaftliche Verlagsgesellschaft}, address = {Berlin}, isbn = {9783954666331}, pages = {173 -- 183}, subject = {Heilberuf}, language = {de} } @incollection{BoerschSupanDuezguenWeiss, author = {B{\"o}rsch-Supan, Axel and D{\"u}zg{\"u}n, Ismail and Weiss, Matthias}, title = {Labor Productivity in an Aging Society}, series = {Frontiers in Pension Finance}, booktitle = {Frontiers in Pension Finance}, editor = {Broeders, Dirk and Eijffinger, Sylvester C.W. and Houben, Aerdt}, publisher = {Edward Elgar}, address = {Cheltenham}, doi = {10.4337/9781847209924.00013}, pages = {83 -- 98}, abstract = {How to deliver adequate pension benefits at reasonable costs is a huge challenge confronting our ageing societies. This book delivers a comprehensive overview of the latest insights into pension finance, pension system design, pension governance and risk based supervision. It combines state-of-the-art analyses with innovative policy proposals to increase the efficiency and resilience of pension systems and to advance these systems' contribution to global financial stability. Renowned pension experts offer cutting-edge guidance for future decision making and the development of best practices. This exciting exploration of the frontiers in pension finance highlights key aspects of securing long term retirement provisions.}, language = {en} } @article{Weiss, author = {Weiss, Matthias}, title = {On the Evolution of Wage Inequality in Acemoglu's Model of Directed Technical Change}, series = {Applied Economics Letters}, volume = {16}, journal = {Applied Economics Letters}, number = {6}, publisher = {Taylor \& Francis}, doi = {10.1080/13504850701206452}, pages = {591 -- 595}, abstract = {In Acemoglu's model of directed technical change, the skill-premium increases in consequence of an increase in the relative supply of skilled labour. In this article, I argue that other measures of wage inequality such as the Gini-coefficient do not necessarily rise as well. The Gini-coefficient depends positively on the skill-premium, but the effect of an increase in the relative supply of skilled labour is ambiguous. A simulation of Acemoglu's model shows that the growth in the relative supply of skilled labour has led to increased wage inequality in the past, but will lead to decreasing wage inequality in the future.}, language = {en} } @article{WeissGarloff, author = {Weiss, Matthias and Garloff, Alfred}, title = {Skill Biased Technological Change and Endogenous Benefits}, series = {Applied Economics}, volume = {43}, journal = {Applied Economics}, number = {7}, publisher = {Taylor \& Francis}, doi = {10.1080/00036840802599933}, pages = {811 -- 821}, abstract = {In this article, we study the effect of skill-biased technological change on unemployment and wage inequality in the presence of a link between social benefits and average income. In this case, an increase in the productivity of skilled workers, and hence their wage, leads to an increase in average income and hence in benefits. The increased fallback income, in turn, makes unskilled workers ask for higher wages. As higher wages are not justified by corresponding productivity increases, unemployment rises. Generally, we show that skill-biased technological change leads to increasing unemployment of the unskilled and to a moderately increasing wage inequality when benefits are endogenous. The model provides a theoretical explanation for diverging dynamics in wage inequality and unemployment under different social benefits regimes. Analysing the social legislation in 14 countries, we find that benefits are linked to the evolution of average income in Continental Europe but not in the US and the UK. Given this institutional difference, our model predicts that skill-biased technological change leads to rising unemployment in Continental Europe and rising wage inequality in the US and the UK.}, language = {en} } @phdthesis{Weiss, author = {Weiss, Matthias}, title = {Labor Market Effects of Technological Change and Working Time Reduction}, language = {en} } @article{BoerschSupanDuezguenWeiss, author = {B{\"o}rsch-Supan, Axel and D{\"u}zg{\"u}n, Ismail and Weiss, Matthias}, title = {Altern und Produktivit{\"a}t}, series = {Personalf{\"u}hrung}, journal = {Personalf{\"u}hrung}, number = {07}, pages = {74 -- 81}, abstract = {Der Zusammenhang zwischen Alter und Leistungsf{\"a}higkeit von Besch{\"a}ftigten wird in den verschiedensten Disziplinen untersucht - mit zum Teil recht unterschiedlichen Ergebnissen. Dieser Beitrag gibt einen {\"U}berblick {\"u}ber die Literatur und diskutiert die Notwendigkeit einer neuen Sicht der Produktivit{\"a}tsmessung. Bisherige Studien besch{\"a}ftigen sich mit der Messung der individuellen Produktivit{\"a}t. In einer modernen arbeitsteiligen Gesellschaft realisiert sich die Arbeitsproduktivit{\"a}t allerdings weniger in der Einzelperson als vielmehr im Zusammenwirken von j{\"u}ngeren (innovativen, flexiblen?) und {\"a}lteren (erfahrenen?) Mitarbeitern.}, language = {de} } @inproceedings{GreinerCurrleEttletal., author = {Greiner, Nina and Currle, Edda and Ettl, Katrin and Frommeld, Debora and Haug, Sonja and Kudienko, Natalie and Lauer, Norina and Lichtenauer, Norbert and Meussling-Sentpali, Annette and Middel, Luise and Mohr, Christa and Pfingsten, Andrea and Popp, Christof and Raptis, Georgios and Weber, Karsten}, title = {Technik im Alltag - Technik zum Leben : Telepr{\"a}senzgest{\"u}tzte Pflege und Therapie bei Schlaganfallpatient*innen}, series = {Kann Digital Pflege?: Clusterkonferenz ,,Zukunft der Pflege", 3., September 2020, N{\"u}rnberg}, volume = {Konferenzband Teil 1}, booktitle = {Kann Digital Pflege?: Clusterkonferenz ,,Zukunft der Pflege", 3., September 2020, N{\"u}rnberg}, address = {K{\"o}nigstetten, {\"O}sterreich}, issn = {2710-3048}, pages = {57 -- 61}, abstract = {Vorgestellt wird das Forschungsvorhaben des interdisziplin{\"a}ren Forschungsprojekts „DeinHaus 4.0 - Telepr{\"a}senzroboter f{\"u}r die Pflege und Unterst{\"u}tzung von Schlaganfallpatientinnen und -patienten (TePUS)". {\"U}ber geeignete Robotersysteme sollen den Proband*innen individuell abgestimmte Angebote aus den Bereichen Telenursing und Teletherapie zur Verf{\"u}gung gestellt werden. Hierbei werden einerseits Telepr{\"a}senzsitzungen durchgef{\"u}hrt, anderseits kommen verschiedene Apps zum Einsatz. Die Interventionen werden mittels eines Mixed-Methods-Ansatzes evaluiert. Begleitend werden Technikakzeptanz und Nutzungsbereitschaft untersucht.}, subject = {Schlaganfall}, language = {de} } @incollection{GrunowPfingstenBorgetto, author = {Grunow, Dieter and Pfingsten, Andrea and Borgetto, Bernhard}, title = {Selbsthilfe}, series = {Handbuch Gesundheitswissenschaften}, booktitle = {Handbuch Gesundheitswissenschaften}, editor = {Hurrelmann, Klaus and Razum, Oliver}, edition = {6. durchgesehene Auflage}, publisher = {Beltz}, address = {Weinheim}, isbn = {9783779943549}, pages = {961 -- 983}, abstract = {Die Gesundheitsversorgung kommt ohne die Eigenverantwortung, Selbsthilfe und aktive Mitarbeit der Patient*innen nicht aus. Die medizinische und psychosoziale Versorgung st{\"o}ßt bei chronischen Erkrankungen und bei Behinderungen an ihre Grenzen. Zus{\"a}tzlich zu dem professionellen Versorgungssystem leisten daher individuelle und gemeinschaftliche Selbsthilfe einen wissenschaftlich insgesamt gut belegten, wichtigen Beitrag zur Krankheitsbew{\"a}ltigung und zur Verbesserung der Lebensqualit{\"a}t von Menschen mit chronischen Erkrankungen und Behinderungen; Belastungen und „Nebenwirkungen" scheinen sich in engen Grenzen zu halten. Neben gegenseitiger Hilfe in Selbsthilfegruppen geh{\"o}ren Interessenvertretung, Beratung und Information durch und f{\"u}r Betroffene, Kooperation mit dem Versorgungssystem und zunehmend virtuelle Selbsthilfe zu den wichtigsten Selbsthilfe-Aktivit{\"a}ten. Die gemeinschaftliche Selbsthilfe wird finanziell in erheblichem Umfang durch die gesetzlichen Krankenkassen gef{\"o}rdert. Viele Selbsthilfegruppen erhalten Unterst{\"u}tzung durch lokale Selbsthilfekontaktstellen und {\"u}berregionale Selbsthilfeorganisationen. Die gemeinschaftliche Selbsthilfe hat sich von einer anfangs prim{\"a}r emanzipativen und medizinkritischen Bewegung zu einem immer st{\"a}rker integralen Bestandteil des deutschen Gesundheitssystems entwickelt und ist damit facettenreicher geworden. Sie hat damit aber auch ihren Schwerpunkt auf eine Weise verschoben, dass ihre zuk{\"u}nftige Entwicklung im Spannungsfeld weiterer funktionaler Differenzierung und Institutionalisierung, Selbstaufl{\"o}sung und Neustart sowie als Ausl{\"o}ser f{\"u}r Anpassungsprozesse bei den anderen, sie umgebenden sozialen Systemen, diskutiert wird.}, subject = {Medizinische Versorgung}, language = {de} } @article{WulfWestnerSchoenetal., author = {Wulf, Frederik and Westner, Markus and Sch{\"o}n, Maximilian and Strahringer, Susanne and Loebbecke, Claudia}, title = {Cloud-Computing-Nutzung bei der Continental AG}, series = {Wirtschaftsinformatik \& Management}, volume = {13}, journal = {Wirtschaftsinformatik \& Management}, number = {4}, publisher = {Springer Nature}, issn = {1867-5905}, doi = {10.1365/s35764-021-00342-x}, pages = {302 -- 309}, abstract = {Dieser Artikel richtet sich an IT-F{\"u}hrungskr{\"a}fte, die die Nutzung von Cloud Computing (CC) in ihren Unternehmen f{\"o}rdern wollen. Eine Fallstudie des Konzerns Continental AG zeigt, wie Continental CC in großem Maßstab f{\"u}r die Organisation nutzbar machte. Das Unternehmen ging dabei in drei Schritten vor: Nach einer Experimentierphase wurde der Einsatz zunehmend professionalisiert und CC abschließend umfangreich nutzbar gemacht. Hieraus k{\"o}nnen drei Hand-lungsempfehlungen f{\"u}r F{\"u}hrungskr{\"a}fte abgeleitet werden: (1) die CC-Strategie nach dem Delivery-Modell differenzieren, (2) in die Integration von Infrastructure-as-a-Service (IaaS)- und Platform-as-a-Service (PaaS)-Anbietern investieren und (3) den Wissenstransfer innerhalb des Unternehmens f{\"o}rdern, um Ver{\"a}nderungen zu erm{\"o}glichen.}, subject = {Cloud Computing}, language = {de} } @article{ScheerKubowitschDendorferetal., author = {Scheer, Clara and Kubowitsch, Simone and Dendorfer, Sebastian and Jansen, Petra}, title = {Happy Enough to Relax? How Positive and Negative Emotions Activate Different Muscular Regions in the Back - an Explorative Study}, series = {Frontiers in Psychology}, volume = {Volume 12}, journal = {Frontiers in Psychology}, number = {May 2021}, publisher = {Frontiers Media}, issn = {1664-1078}, doi = {10.3389/fpsyg.2021.511746}, abstract = {Embodiment theories have proposed a reciprocal relationship between emotional state and bodily reactions. Besides large body postures, recent studies have found emotions to affect rather subtle bodily expressions, such as slumped or upright sitting posture. This study investigated back muscle activity as an indication of an effect of positive and negative emotions on the sitting position. The electromyography (EMG) activity of six back muscles was recorded in 31 healthy subjects during exposure to positive and negative affective pictures. A resting period was used as a control condition. Increased muscle activity patterns in the back were found during the exposure to negative emotional stimuli, which was mainly measured in the lumbar and thorax regions. The positive emotion condition caused no elevated activity. The findings show that negative emotions lead to increased differential muscle activity in the back and thus corroborate those of previous research that emotion affects subtle bodily expressions.}, language = {en} } @inproceedings{FigasKnoerlMoertlbaueretal., author = {Figas, Paula and Kn{\"o}rl, Susanne and M{\"o}rtlbauer, Stefanie and Sedelmaier, Yvonne and Schroll-Decker, Irmgard}, title = {Developing Software Engineering Education as a Didactical Discipline in its own right}, series = {1st European Conference on Software Engineering Education (ECSEE) at Seon Monastery, Germany}, booktitle = {1st European Conference on Software Engineering Education (ECSEE) at Seon Monastery, Germany}, editor = {Hagel, Georg and Mottok, J{\"u}rgen}, publisher = {Shaker Verlag}, pages = {1 -- 15}, abstract = {Simultaneously to the growing significance of the discipline software engineering (SE) also its education becomes more important. This reinforces the need of a theoretical foundation of software engineering education, but there is still a lack of scientifically justified didactical concepts. In the context of the project EVELIN (Experimental Improvement in Learning Software Engineer-ing) the authors want to give a decisive impulse for the development of a "Fachdidaktik software engineering" (FD-SE). In order to compile an adequate theoretical basis for a Fachdidaktik of software engineering "Allgemeine Did-aktik" (AD)1, its relation to "Fachdidaktik" (FD) in general, the special branch of science of software engineering and related scientific disciplines are dis-cussed. This analysis is used to justify the necessity of an autonomous scientific discipline Fachdidaktik software engineering which meets the challenges of teaching and learning software engineering. The main contributions of this pa-per are proposals on how this FD can be built scientifically upon AD, on the one hand, and how it can be implemented by specific didactical approaches for software engineering, on the other hand.}, subject = {Fachdidaktik}, language = {en} } @inproceedings{SerbunPorshynMuelleretal., author = {Serbun, Pavel and Porshyn, Vitali and M{\"u}ller, G{\"u}nter and Mingels, Stephan and L{\"u}tzenkirchen-Hecht, Dirk and Bachmann, Michael and D{\"u}sberg, Felix and Dams, Florian and Hofmann, Martin and Pahlke, Andreas and Prommesberger, Christian and Langer, Christoph and Ławrowski, Robert Damian and Schreiner, Rupert}, title = {Field emission behavior of Au-tip-coated p-type Si pillar structures}, series = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, booktitle = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, publisher = {IEEE}, issn = {2380-6311}, doi = {10.1109/IVNC.2016.7551516}, pages = {181 -- 182}, abstract = {Precisely aligned high-aspect-ratio (HAR) silicon tip arrays were fabricated using enhanced reactive ion etching with an inductively-coupled-plasma followed by a sharpening oxidation. A gold thin film was then sputtered only on the tips of the HAR structures. Field-emission (FE) properties from Au-coated HAR p-Si tip array cathodes have been systematically investigated by means of field emission scanning microscopy (FESM). A rather high efficiency of the HAR Si structures (71\% at 550 V), but limited homogeneous FE with currents of 1-600 nA might be correlated with the varying geometry of the tips and the presence of oxides. I-V measurements of single Au-coated HAR emitters revealed activation effects and the saturation current region at 3 nA. An increase of the saturation current by 4 orders of magnitude was observed during 20 hours of conditioning at constant voltage, which finally resulted in nearly reproducible FN curves with a ß-factor of 473. An excellent stability of the emission current of less than 1 \% was obtained during the additional long-time conditioning at constant voltage. Optical switching under halogen lamp illumination resulted in at least 2 times higher saturation currents and showed a linear dependence of the FE current on the light color temperature.}, language = {en} } @inproceedings{BachmannDamsDuesbergetal., author = {Bachmann, Michael and Dams, Florian and D{\"u}sberg, Felix and Hofmann, Martin and Pahlke, Andreas and Langer, Christoph and Ławrowski, Robert Damian and Prommesberger, Christian and Schreiner, Rupert}, title = {Extraction of the characteristics of limiting elements from field emission measurement data}, series = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, booktitle = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, publisher = {IEEE}, issn = {2380-6311}, doi = {10.1109/IVNC.2016.7551474}, pages = {81 -- 82}, abstract = {In this contribution we will present an algorithm to extract the characteristics of non-Fowler-Nordheim (FN) circuit elements from saturation limited field emission (FE) measurement data. The method for calculating the voltage drop on limiting circuit elements is based on circuit theory as well as Newton's method. Since no assumption on the limiting circuit is made, this method is applicable to any FE data showing saturation. To be able to determine the significance of any parameter output, the uncertainties of data and extracted parameters are fully taken into account throughout the algorithm. External serial resistors and a limiting p-doped substrate are analyzed, where the latter shows a diode-like behavior.}, language = {en} } @inproceedings{PrommesbergerLangerŁawrowskietal., author = {Prommesberger, Christian and Langer, Christoph and Ławrowski, Robert Damian and Schreiner, Rupert}, title = {Field emission from black silicon structures with integrated gate electrode}, series = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, booktitle = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, publisher = {IEEE}, issn = {2380-6311}, doi = {10.1109/IVNC.2016.7551532}, pages = {219 -- 220}, abstract = {Black silicon structures with integrated gate electrode were realized by using an improved fabrication process. An enhanced insulation layer was achieved by a combination of dry and wet oxidation, and a gold layer was evaporated as gate electrode. The black silicon structures were prepared with a RIE/ICP etching process at room temperature. Arrays of 16 and 100 apertures with buried p-doped black silicon whiskers have been fabricated. These structures have an emitter height of approximately 1.5 μm with tip radii between 5 nm and 30 nm. The whiskers are surrounded by the gate electrode in a distance of 1.5 μm. Integral field emission measurements yielded an onset voltage of 92 V for 16 apertures and 60 V for 100 apertures for an emission current of 1 nA. Maximum emission currents up to 0.2 μA were observed for the array with 100 apertures at a cathode voltage of 200 V. Stability measurements showed a current fluctuation of ± 21\% at a mean value of the emission current of 12 nA over a period of 30 minutes for 16 apertures with b-Si whiskers.}, language = {en} } @inproceedings{LangerPrommesbergerŁawrowskietal., author = {Langer, Christoph and Prommesberger, Christian and Ławrowski, Robert Damian and Schreiner, Rupert and Huang, Yifeng and She, Juncong}, title = {Gated p-Si field emission cathode applied in an ionization vacuum gauge}, series = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, booktitle = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, publisher = {IEEE}, issn = {2380-6311}, doi = {10.1109/IVNC.2016.7551500}, pages = {145 -- 146}, abstract = {A commercial Bayard-Alpert ionization vacuum gauge was equipped with a field emission electron source based on a cathode consisting of an array of 16 gated, p-doped, and DLC-coated Si-tips and characterized. An anode current of about 1.3 μA led to an ion current of 7 fA at 3×10 -7 mbar and 0.8 pA at 4×10 -5 mbar. Whereas at pressures higher than 4×10 -5 mbar the emission current of the electron source decreased, the ratio of ion and anode current remained linear. A nearly constant sensitivity of ~ 17 mbar -1 of the ionization vacuum gauge within the investigated pressure range was depicted.}, language = {en} } @inproceedings{ŁawrowskiLangerPrommesbergeretal., author = {Ławrowski, Robert Damian and Langer, Christoph and Prommesberger, Christian and Schreiner, Rupert}, title = {Field emission from three-dimensional epitaxial grown GaN-microrods}, series = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, booktitle = {29th International Vacuum Nanoelectronics Conference (IVNC), 2016, 11-15 July, Vancouver, BC, Canada}, publisher = {IEEE}, issn = {2380-6311}, doi = {10.1109/IVNC.2016.7551477}, pages = {87 -- 88}, abstract = {A novel three-dimensional epitaxial technique allows on patterned substrates the realization of gallium nitride pillars, also known as nano- and microrods. The typical dimensions of the microrods are in the range of one micron for the radius of the hexagonal footprint and about 10 μm in height. The microrods consist of a semiconductor heterostructure with an n GaN core, a n-GaN shell, a p GaN shell and an intermediate quantum well layer. The field emission properties were investigated in diode configuration by integral field emission measurements in a vacuum chamber at pressures around 10 -9 mbar. The spacer was mica with a thickness of 50 μm. A metallized fine-meshed nitride grid (or a metallized Si-grid) was used as anode. A current of about 1 μA at a voltage of 1250 V (1750 V) was measured. An onset field of about 12.5 MV/m (20 MV/m) and field enhancement factors in the range of 200 to 500 (150 to 300) were found. The investigation with the fine-meshed grid showed an expected pronounced saturation region.}, language = {en} } @inproceedings{PrommesbergerŁawrowskiLangeretal., author = {Prommesberger, Christian and Ławrowski, Robert Damian and Langer, Christoph and Mecani, Mirgen and Huang, Yifeng and She, Juncong and Schreiner, Rupert}, title = {Field emission properties of ring-shaped Si ridges with DLC coating}, series = {Proc. SPIE 10248, Nanotechnology VIII, 102480H (30 May 2017)}, volume = {102480H}, booktitle = {Proc. SPIE 10248, Nanotechnology VIII, 102480H (30 May 2017)}, editor = {Tiginyanu (Ed.), Ion M.}, publisher = {Society of Photo-Optical Instrumentation Engineers (SPIE)}, doi = {10.1117/12.2265627}, abstract = {We report on the fabrication and the emission characterization of single ring-shaped Si ridges with a coating of diamond-like carbon (DLC). The reactive ion etching and the subsequent inductively coupled plasma step were adjusted to realize ring-shaped Si ridges with a height of 7.5 μm respectively 15 μm and an apex radius of 20 - 25 nm. The samples were coated with a DLC layer (thickness ≈ 2 - 5 nm) by a filtered cathodic vacuum arc deposition system in order to lower the work function of the emitter and to improve the field emission characteristics. The field emission characterizations were done in diode configuration with cathode and anode separated by a 50 μm thick mica spacer. A higher emission current was carried out for the ring-shaped Si ridge in comparison to the point-shaped Si tips due to the increased emission area. The highest emission current of 0.22 μA at 1000 V was measured on a DLC-coated sample with the highest aspect ratio. No degradation of the emission current was observed in the plateau regime during a measurement period of 6 h. Finally, no decreasing performance of the field emission properties was found due to changes in the geometry or destructions.}, language = {en} } @inproceedings{ThumannWagnerSucketal., author = {Thumann, Philipp and Wagner, Marcus and Suck, Bertram and Meinhardt, Josef and Marburg, Steffen}, title = {Explicit and Implicit FE Simulations of Material Tests for Subsequent Durability Analyses}, series = {11th European LS-DYNA Conference, Salzburg}, booktitle = {11th European LS-DYNA Conference, Salzburg}, abstract = {Because of increased stroke rates the loads on forming tools increase too. To ensure a save design of components, durability analyses are intended. For this, simulation results from FE analyses are necessary. Therefore, it is desirable to use elements with quadratic function, because of a good stress approximation.The goal of the described investigation is to show if calculation results created by LS-DYNA [1] can be used for durability analyses. Especially the use of quadratic elements is investigated. For the evaluation, on the one hand explicit FE analyses of a special durability test are carried out. These analyses are validated by available test data. To create results for later durability analyses further FE analyses with implicit time discretisation are carried out. In this paper results of the investigations are presented and evaluated critically.}, language = {en} } @inproceedings{ThumannSwidergalWagner, author = {Thumann, Philipp and Swidergal, Krzysztof and Wagner, Marcus}, title = {Calculation and validation of material tests with specimens made out of filled elastomers}, series = {10th European LS-DYNA Conference 2015, W{\"u}rzburg}, booktitle = {10th European LS-DYNA Conference 2015, W{\"u}rzburg}, abstract = {In deep-drawing dies for steel sheet parts of car bodies huge masses are moved. To prevent vibrations, which occur by sudden acceleration or stopping of those masses, elastomeric tubular dampers [1] are used. The dampers are made out of carbon filled elastomers. A good knowledge about the material behaviour of metals is available. But for the numerical investigation of complete deep-drawing dies the elastomeric dampers must be taken into account, too. To characterize the material behaviour of the elastomers tensile tests and pressure tests were carried out. The received material data from the tests were read into LS-DYNA [2]. Simulation models of the tensile test and the pressure test were created for LS-DYNA according to the real dimensions and boundary conditions. For validation purposes, calculations of loading cycles were done to enable a comparison between test data and simulation results. For the calculations the implemented material model *MAT_SIMPLIFIED_RUBBER_WITH_DAMAGE (*MAT_183) was used. The comparison shows a good fitting between the test data and the calculation results with respect to the mechanical material behaviour by using this material model in single loading cases. The settings from the simulations of material tests were transferred to simulations of dampers, which are used in deep-drawing dies.}, language = {en} } @inproceedings{KochThumannWagner, author = {Koch, F. and Thumann, Philipp and Wagner, Marcus}, title = {Simulation with implicit time integration of high loaded areas of a forming tool for large presses using LS-DYNA}, series = {13. LS-DYNA Forum 2014, 6.-8. Oktober, Bamberg}, booktitle = {13. LS-DYNA Forum 2014, 6.-8. Oktober, Bamberg}, language = {en} } @inproceedings{MecklLubesederZausingeretal., author = {Meckl, D. and Lubeseder, Christian and Zausinger, C. and Wurmb, Ingo von and Meinhardt, Josef and Swidergal, Krzysztof and Wagner, Marcus}, title = {Simulation of press dies for large presses using the flexible multibody dynamics in Recurdyn}, series = {4th RecurDyn TechnologyDays 2014, M{\"u}nchen}, booktitle = {4th RecurDyn TechnologyDays 2014, M{\"u}nchen}, language = {en} } @inproceedings{BachmannDamsDuesbergetal., author = {Bachmann, Michael and Dams, Florian and D{\"u}sberg, Felix and Hofmann, Martin and Pahlke, Andreas and Langer, Christoph and Ławrowski, Robert Damian and Prommesberger, Christian and Schreiner, Rupert}, title = {Control of the electron source current}, series = {International Vacuum Nanoelectronics Conference (IVNC), 30th, 2017, Regensburg}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 30th, 2017, Regensburg}, publisher = {IEEE}, doi = {10.1109/IVNC.2017.8051550}, pages = {66 -- 67}, abstract = {A control circuit to stabilize the flux of electrons transmitted through an extractor electrode is presented. By controlling the emission current a fluctuation with a standard deviation of 0.015\% is observed. However, the achievable stability of the transmitted electron current is limited due to a variation of the extraction grid current ratio showing a standard deviation of 4.33\%. By regulating the difference of the emission current and the extraction grid current an improved stability of the transmitted electron current down to a standard deviation of 0.280\% is observed. Even with operation at 2 × 10 -5 mbar a standard deviation of 0.558\% is achieved.}, language = {en} } @inproceedings{PrommesbergerLangerŁawrowskietal., author = {Prommesberger, Christian and Langer, Christoph and Ławrowski, Robert Damian and Schreiner, Rupert}, title = {Benzocyclobutene as a novel integrated spacer material in a field emission electron source}, series = {International Vacuum Nanoelectronics Conference (IVNC), 30th, 2017, Regensburg}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 30th, 2017, Regensburg}, publisher = {IEEE}, doi = {10.1109/IVNC.2017.8051605}, pages = {192 -- 193}, abstract = {For the realization of a miniaturized field emission electron source we tested benzocyclobutene (BCB) as a new spacer material between cathode and anode. We fabricated black silicon emitters and characterized the emission behavior with an integrated 5 μm thin and large-area spacer of BCB. The integrated BCB layer allows the realization of a compact electron source with only two components consisting of a cathode with BCB and a grid. The comparison with other spacer materials like polyimide (25 μm thickness) or mica (50 μm thickness) revealed for the cathode with BCB a significantly reduced operational voltage of 240 V for a field emission current of 1 μA.}, language = {en} } @inproceedings{SwidergalLubesederWurmbetal., author = {Swidergal, Krzysztof and Lubeseder, Christian and Wurmb, Ingo von and Meinhardt, Josef and Wagner, Marcus and Marburg, Steffen}, title = {Effiziente Methode zur Bestimmung von dynamischen strukturellen Belastungen in Großpresswerkzeugen}, series = {36. EFB-Kolloquium Blechverarbeitung 2016, Fellbach}, booktitle = {36. EFB-Kolloquium Blechverarbeitung 2016, Fellbach}, language = {de} } @techreport{ThumannSwidergalWagner, author = {Thumann, Philipp and Swidergal, Krzysztof and Wagner, Marcus}, title = {Experimentelle Ermittlung von Materialkennwerten und numerische Untersuchungen an einem gef{\"u}llten Elastomer}, series = {Forschungsbericht 2015 / Ostbayerische Technische Hochschule Regensburg}, journal = {Forschungsbericht 2015 / Ostbayerische Technische Hochschule Regensburg}, editor = {Baier, Wolfgang}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-00-048589-3}, pages = {49 -- 50}, language = {de} } @article{SwidergalLubesederWurmbetal., author = {Swidergal, Krzysztof and Lubeseder, Christian and Wurmb, Ingo von and Lipp, Arnulf and Meinhardt, Josef and Wagner, Marcus and Marburg, Steffen}, title = {Experimental and numerical investigation of blankholder's vibration in a forming tool}, series = {Production Engineering - Research and Development}, volume = {9}, journal = {Production Engineering - Research and Development}, number = {5-6}, publisher = {Springer}, issn = {0944-6524}, doi = {10.1007/s11740-015-0640-9}, pages = {634}, abstract = {In order to achieve the energy and efficiency goals in modern automotive press shops, press systems with increasingly high stroke rates are being implemented (Meinhardt in proceedings of ACI forming in car body engineering. Bad Nauheim, Germany 2012). As a side effect, the structural dynamic loads on the press and especially on the forming tool increase. Hence, to design reliable and withstanding forming tools, a detailed knowledge of the vibrations and resulting critical loads is essential. In this paper, the main focus is put on the vibration of the blankholder—the heaviest moving component in the forming tool. To predict those vibrations, a coupled multibody-finite element simulation (MBS-FEM) is conducted, which combines rigid and elastic modeling approaches. Also, an experimental validation of the blankholder vibration under operational load is carried out. To compare the numerical and experimental results—both in time and frequency domain—an 1/3-octave analysis of a blankholder's vibrational speed is performed. The test measurements agree well with the MBS-FEM simulation.}, language = {en} } @article{ThumannMarburgMeinhardtetal., author = {Thumann, Philipp and Marburg, Steffen and Meinhardt, Josef and Saubiez, Jean-Marc and Hoogen, Michael and Suck, Bertram and Wagner, Marcus}, title = {Frequency Dependent Fatigue Strength Investigations on Tempered Steel and Nodular Cast Iron}, series = {steel research international}, volume = {90}, journal = {steel research international}, number = {7}, publisher = {Wiley}, doi = {10.1002/srin.201800620}, abstract = {This paper presents experimental fatigue tests on specially shaped specimens made from quenched and tempered steel 42CrMoS4 and nodular cast iron EN-GJS-600-3. The specimens are geometrically designed to resemble actual subcomponents of forming and cutting dies for sheet metal manufacturing. These subcomponents have failed in the past.Experiments are carried out using a fictive load-time function, which is a modification of an actually measured load curve and has variable mean and amplitude values. This first test series serves as a general validation of a subsequent fatigue analysis. A second test series is carried out with constant mean and amplitude values with a load ratio 𝑅≈0. Here, the load frequencies in the individual test runs are varied between f = 5 Hz and f = 45 Hz in order to investigate the influence of the frequency. Both series are performed on a servo-hydraulic testing machine.The experimental data is then statistically evaluated. The values for the scatter correlate with data from the literature. The data from the test series with the fictive load-time function can thus be used for subsequent validation of a fatigue calculation, which will be addressed in a future publication. Most significant are the findings from the second series of experiments with varied load frequencies, as a significant frequency influence could be detected. Furthermore, the hardening and softening behavior under cyclic loading and the fracture behavior of the materials are analyzed and compared with data from the literature.}, language = {en} } @inproceedings{SwidergalWagnerLubesederetal., author = {Swidergal, Krzysztof and Wagner, Marcus and Lubeseder, Christian and Wurmb, Ingo von and Meinhardt, Josef and Marburg, Steffen}, title = {Finite element simulation of blankholder's lift-off in a deep drawing tool using Abaqus/Standard}, series = {SIMULIA Community Conference, 19 - 21 May 2015, Berlin, Germany}, booktitle = {SIMULIA Community Conference, 19 - 21 May 2015, Berlin, Germany}, abstract = {In the deep drawing tools for forming car body parts, heavy blankholders are used to prevent buckling and wrinkling of the blank. During each press cycle, those large masses need to be lifted, raising thereby the structural dynamic load on the deep drawing tool and on the press. Therefore a detailed knowledge about the blankholder's lift-off event is essential for an accurate and robust design of forming tools. In this paper, a dynamic finite element method (FEM) simulation of a blankholder's lift-off in a selected automotive deep drawing tool is presented enabling identification of regions of critical stresses. The FEM model is built within the Abaqus/CAE environment and solved with Abaqus/Standard. Each dynamic analysis is preceded by a static analysis where the gravity load is applied and the lifting bolts are pre-stressed. A special emphasis is put on modeling the elastomer dampers, which are installed between lifting bolts and the blankholder to avoid hard impacts during the lift-off event. Those dampers are modelled using a hyperelastic material with hysteresis. In addition, an experimental validation of a blankholder's vibration under operating loading was carried out. The simulation results are in good agreement with the measurements.}, language = {en} } @article{SittlMarburgWagner, author = {Sittl, Christopher and Marburg, Steffen and Wagner, Marcus}, title = {Application of a Krylov subspace method for an efficient solution of acoustic transfer functions}, series = {Mechanical Systems and Signal Processing}, volume = {148}, journal = {Mechanical Systems and Signal Processing}, publisher = {Elsevier}, doi = {10.1016/j.ymssp.2020.107135}, abstract = {Solving acoustic radiation problems, arising from systems including fluid-structure interaction, is of interest in many engineering applications. Computing frequency response functions over a large frequency range is a concern in such applications. A method which solves the Helmholtz equation for multiple frequencies in one step is the matrix-Pad{\´e}-via-Lanczos connection for unsymmetric systems, as presented by Wagner et al. [1]. The present work is based on Ref. [1] and presents a method for efficiently computing frequency responses over a frequency range for coupled structural-acoustic problems, where the structure and the acoustic near field are discretized with finite elements and an analytical Dirichlet-to-Neumann map approximates the far field. The method is based on a Krylov-subspace projection technique which derives a matrix-valued Pad{\´e} approximation for a restricted area in the near field and the pressure field on a spherical boundary. On the spherical boundary, where the finite domain is truncated, the non-local modified Dirichlet-to-Neumann operator is applied as a low-rank update matrix. The present contribution extends this method and incorporates new techniques for a more stable model reduction through the Lanczos algorithm and a novel weighted adaptive windowing technique. Further, structural damping is incorporated, for computing the acoustic radiation of a harmonically excited plate. These computed results are compared with acoustic measurements in an anechoic chamber and verified with computational results obtained with a commercial code that uses the perfectly matched layer method.}, language = {en} } @inproceedings{SwidergalLubesederWurmbetal., author = {Swidergal, Krzysztof and Lubeseder, Christian and Wurmb, Ingo von and Meinhardt, Josef and Wagner, Marcus and Marburg, Steffen}, title = {Vibration analysis of an automotive forming tool using coupled MBS-FEM simulation and experimental validation}, series = {Proceedings of the 26th International Conference on Noise and Vibration Engineering (ISMA2014), Leuven, Belgium}, booktitle = {Proceedings of the 26th International Conference on Noise and Vibration Engineering (ISMA2014), Leuven, Belgium}, pages = {2931 -- 2942}, abstract = {To improve efficiency in automotive press shops, press systems with increasingly high stroke rates are beingimplemented, raising thereby the structural dynamic load on the press and especially on the forming tool. Adetailed knowledge of the vibrations and resulting critical loads is thus essential for accurate and reliable de-signs of forming tools. In this paper, multibody simulation (MBS) of a selected automotive tool is presentedenabling the identification of the vibration of its components. Starting from a pure rigid modelling approach,the MBS model is extended by adding finite element (FE) component to allow extra flexibility in the sys-tem. As an example, a detailed vibrational analysis - both in time and frequency domain - is performed ona blankholder. Also an experimental validation of a blankholder vibration under operational load is carriedout, with test signal data gained by piezoelectric accelerometers.}, language = {en} } @inproceedings{ŁawrowskiLangerPrommesbergeretal., author = {Ławrowski, Robert Damian and Langer, Christoph and Prommesberger, Christian and Schreiner, Rupert}, title = {Microrods and microlines by three-dimensional epitaxially grown GaN for field emission cathodes}, series = {International Vacuum Nanoelectronics Conference (IVNC), 30th, 2017, Regensburg}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 30th, 2017, Regensburg}, publisher = {IEEE}, doi = {10.1109/IVNC.2017.8051576}, pages = {130 -- 131}, abstract = {The three-dimensional epitaxial technique allows the realization of gallium nitride lines in addition to the rods. To optimize the properties of GaN-based field emission cathodes further investigations and an improvement of the epitaxial process were performed. The microrods and microlines consist of a one-order higher n-doped gallium nitride in comparison to the gallium nitride layer on the sapphire substrate. The typical height of the microrods and -lines is about 5 μm. The field emission properties of these structures were investigated in diode configuration by integral field emission measurements at pressures below 10 -9 mbar. For the microrods (microlines) a voltage of 1100 V (2000 V) was measured for a field emission current of about 0.5 μA with an onset field of about 12 MV/m (24 MV/m). Furthermore, the field enhancement factors for microrods and -lines are in the range of 300 and 200, respectively.}, language = {en} } @inproceedings{ŁawrowskiLangerPrommesbergeretal., author = {Ławrowski, Robert Damian and Langer, Christoph and Prommesberger, Christian and Schreiner, Rupert}, title = {Light emitting diodes based on three-dimensional epitaxial grown crystalline GaN rods}, series = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, booktitle = {7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, M{\"u}nchen}, publisher = {VDE-Verlag}, address = {M{\"u}nchen}, isbn = {978-3-8007-4491-6}, pages = {131 -- 134}, language = {en} } @inproceedings{SerbunPorshynMuelleretal., author = {Serbun, Pavel and Porshyn, Vitali and M{\"u}ller, G{\"u}nter and L{\"u}tzenkirchen-Hecht, Dirk and Prommesberger, Christian and Langer, Christoph and Ławrowski, Robert Damian and Schreiner, Rupert}, title = {Field emission behavior of single n- and p-type black Si pillar structures}, series = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, publisher = {IEEE}, doi = {10.1109/IVNC.2018.8520292}, pages = {1-2}, abstract = {We have investigated the properties of single n- and p-type black silicon (b-Si) pillars with a height of 20 μ m under strong electric field and halogen lamp or laser illumination. For both type of b-Si pillar structures, I-V measurements revealed strong activation effects, which consisted in sudden current increases during the first up/down voltage sweeps. The maximum reproducible emission current from a single n-type b-Si pillar structure was about 15 μ A. A pronounced saturation region at 240 nA was observed for a single p-type b-Si pillar. The current fluctuation over time showed a standard deviation of 28\% and 2.5\% for n- and p-type single b-Si pillar structures, respectively. Optical switching under halogen lamp illumination resulted in at least 3 times higher saturation currents and showed a linear dependence of the FE current on the laser power.}, language = {en} } @inproceedings{PrommesbergerLangerSchreiner, author = {Prommesberger, Christian and Langer, Christoph and Schreiner, Rupert}, title = {Stable and low noise field emission from single p-type Si-tips}, series = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, publisher = {IEEE}, doi = {10.1109/IVNC.2018.8520018}, pages = {1-2}, abstract = {Single gated p-type Si-tips with two different tip radii were fabricated. An emission current of 2.40 μA was measured for the sharp-edged tip at a voltage of 170 V. In contrast, a stable and reproducible emission behavior was observed with an increased tip radius resulting in a pronounced saturation region between 90 V and 150 V, but merely an emission current of 0.55 μA at 150 V. More remarkable is the stable emission behavior with fluctuation of ± 4 \% during a measurement period of 30 minutes. The integral emission current in a homogeneous tip array (16 emitters) showed nearly the same I-V characteristics compared to the single tip and is therefore, most dominated by only a stable single tip in the array.}, language = {en} } @inproceedings{ŁawrowskiLangerSchreineretal., author = {Ławrowski, Robert Damian and Langer, Christoph and Schreiner, Rupert and Sellmair, Josef}, title = {Nano Emitters on Silicon Pillar Structures generated by a Focused Electron Beam Induced Deposition}, series = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, publisher = {IEEE}, doi = {10.1109/IVNC.2018.8520059}, pages = {1-2}, abstract = {Nano emitters were deposited by focused electron beam induced deposition of Trimethyl-(methylcyclopentadienyl)platinum(IV) on top of silicon pillars. The nano emitters were exactly positioned in the center on the top of up to four pillars of a quadratic arranged array of sixteen pillars with a pitch of 50 μm. Integral field emission measurements were performed in a diode configuration with a 50 μm mica spacer in a vacuum chamber at pressures of about 10 -9 mbar. The Fowler-Nordheim plots show a linear behavior, like expected for an n-type silicon material and a metal needle. The I-V measurement of the most promising sample shows an integral emission current up to 2 μm at a voltage of 600 V (12 MV/m) and an onset voltage for a current of 1 nA of about 300 V.}, language = {en} } @inproceedings{EdlerHanschPrommesbergeretal., author = {Edler, Simon and Hansch, Walter and Prommesberger, Christian and Schreiner, Rupert}, title = {Influence of adsorbates on the performance of a field emitter array in a high voltage triode setup}, series = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, publisher = {IEEE}, doi = {10.1109/IVNC.2018.8520214}, pages = {1-2}, abstract = {The influence of residual gas pressure on the characteristics of black-Silicon field emitter arrays in a high voltage triode setup is investigated. I-Vcharacteristics at different pressure levels show a decrease of emission current with rising pressure. This can be explained by an increase of the work function and charging of the emitter surface due to adsorbates. The initial characteristics can be restored by heating the FEA up to 110 °C during electron emission. This regeneration procedure enables an extension of the lifetime from about 20 h to 440 h at a residual gas pressure of 10 -5 mbar.}, language = {en} } @inproceedings{LangerHausladenPrommesbergeretal., author = {Langer, Christoph and Hausladen, Matthias and Prommesberger, Christian and Ławrowski, Robert Damian and Bachmann, Michael and D{\"u}sberg, Felix and Pahlke, Andreas and Shamonin (Chamonine), Mikhail and Schreiner, Rupert}, title = {Field emission current investigation of p-type and metallized silicon emitters in the frequency domain}, series = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, publisher = {IEEE}, doi = {10.1109/IVNC.2018.8520127}, pages = {1-2}, abstract = {We investigated two different field emitter arrays consisting of 10×10 p-type and 10×10 undoped Au-coated high aspect ratio silicon tips. The I-V characterization of the p-type sample showed a pronounced saturation for voltages higher than 500 V and a maximum emission current of 39 nA. The metallized sample revealed a FN-like emission up to several μA. The metallized and the p-type sample operating below the saturation region showed high current fluctuations of ±16\%. Whereas, the metallized sample with current regulation and the p-type sample in the saturation yielded a current stability of ±0.4\% and ±0.3\%, respectively. Investigations in the frequency domain revealed the for field emission typical 1/f-noise. By operating in the saturation region (p-type sample) or using an emission current regulation (metallized sample) the noise level was reduced by at least 20 dB. Finally, the p-type sample was illuminated by a light emitting diode to increase and modulate the emission current in the saturation region. The emission current was increased by a factor of 3.7 to 145 nA. With this configuration we emulated an unstable emission behavior and evaluated the performance of our emission current regulation circuit.}, language = {en} } @inproceedings{SerbunPorshynLuetzenkirchenHechtetal., author = {Serbun, Pavel and Porshyn, Vitali and L{\"u}tzenkirchen-Hecht, Dirk and Prommesberger, Christian and Langer, Christoph and Ławrowski, Robert Damian and Schreiner, Rupert}, title = {Photosensitivity of single silicon high-aspect-ratio tips with different doping levels}, series = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, booktitle = {International Vacuum Nanoelectronics Conference (IVNC), 31st, 2018, Kyoto, Japan}, publisher = {IEEE}, doi = {10.1109/IVNC.2018.8520288}, pages = {1-2}, abstract = {Photosensitivity of single lightly p-doped, highly p-doped, with an integrated p/n junction and intrinsic high-aspect-ratio (HAR) silicon tips was investigated in an ultra-high vacuum environment. The current-voltage characteristics (I-V) of the lightly doped p-type HAR tips showed a characteristic current saturation at around 10-12 nA, whereas the HAR Si tips with p/n junction showed similar saturation phenomena, however, at much smaller current values starting at ~20-30 pA. Optical switching under a halogen lamp illumination resulted in at least 2-4 times higher saturation currents and showed a linear dependence between the illumination power and the FE current, for both types of structures. In case of the highly p-doped HAR tips optical current switching effects, i. e. current saturation, were observed at rather low current levels 1-2 pA. Intrinsic HAR Si-tips showed relative unstable field emission behavior without a clear evidence of the photosensitivity.}, language = {en} } @misc{Schubert, author = {Schubert, Martin J. W.}, title = {Verfahren zur Simulation von Netzwerken auf einer ereignisgesteuerten Zeitachse mittels verteilter, lokaler Iteration}, language = {de} } @misc{DeclerqSchubert, author = {Declerq, Michel and Schubert, Martin J. W.}, title = {Circuit Interm{\´e}diaire entre un Circuit Logique {\`a} Basse-Tension et un Etage de Sortie {\`a} Haute-Tension R{\´e}alis{\´e}s dans une Technologie CMOS Standard}, abstract = {La pr{\´e}sente invention concerne un circuit interm{\´e}diaire entre un circuit logique a basse tension et un {\´e}tage de sortie {\`a} haute tension r{\´e}alis{\´e}s dans une technologie CMOS standard. L'{\´e}tage de sortie (20) comporte deux transistors respectivement {\`a} canal N et {\`a} canal P, r{\´e}alis{\´e}s selon une technologie CMOS standard. Le circuit interm{\´e}diaire comporte un translateur de niveau de tension (21) coupl{\´e} entre un circuit logique d'entr{\´e}e SL et ledit {\´e}tage de sortie (20). Ce translateur de niveau de tension (21) est r{\´e}alis{\´e} selon une technologie CMOS standard et est constitu{\´e} d'au moins deux blocs de base identiques formant des miroirs de tension interconnect{\´e}s de fa{\c{c}}on crois{\´e}e. Ce circuit est utilis{\´e} pour commander des transducteurs, des {\´e}crans plasma et des actionneurs {\´e}lectrom{\´e}caniques.}, language = {fr} } @techreport{HedererWagner, author = {Hederer, Sebastian and Wagner, Marcus}, title = {Entwicklung und Implementierung eines konstitutiven Modells zur Beschreibung der Plastizit{\"a}t von Dualphasenst{\"a}hle bei großen plastischen Deformationen}, series = {Forschungsbericht 2018 / Ostbayerische Technische Hochschule Regensburg}, journal = {Forschungsbericht 2018 / Ostbayerische Technische Hochschule Regensburg}, editor = {Baier, Wolfgang}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {9783981820911}, pages = {68 -- 69}, language = {de} } @inproceedings{SwidergalLubesederWurmbetal., author = {Swidergal, Krzysztof and Lubeseder, Christian and Wurmb, Ingo von and Lipp, Arnulf and Meinhardt, Josef and Wagner, Marcus and Marburg, Steffen}, title = {Structural analysis of an automotive forming tool for large presses using LS-DYNA}, series = {10th European LS-DYNA Conference, W{\"u}rzburg}, booktitle = {10th European LS-DYNA Conference, W{\"u}rzburg}, language = {en} } @inproceedings{WeghWagnerGaudlitzetal., author = {Wegh, Niels and Wagner, Marcus and Gaudlitz, Daniel and Finckh, Hermann and Klein, Markus}, title = {Numerical Simulation of Filling Process in Resin Transfer Molding}, series = {13th International Conference on Flow Processes in Composites Materials (FPCM-13), Kyoto, Japan}, booktitle = {13th International Conference on Flow Processes in Composites Materials (FPCM-13), Kyoto, Japan}, language = {en} } @inproceedings{GeithWagner, author = {Geith, Markus A. and Wagner, Marcus}, title = {Numerical Analysis Of Stent Delivery Systems During Pre- And Intraoperative Processes}, series = {Deutsches LS-DYNA Forum 2018, Bamberg}, booktitle = {Deutsches LS-DYNA Forum 2018, Bamberg}, language = {en} } @inproceedings{SwidergalThumannLubesederetal., author = {Swidergal, Krzysztof and Thumann, Philipp and Lubeseder, Christian and Wurmb, Ingo von and Meinhardt, Josef and Wagner, Marcus and Marburg, Steffen}, title = {Modeling and simulation of carbon black filled elastomer damper using LS-DYNA}, series = {LS-DYNA Forum 2014, Bamberg}, booktitle = {LS-DYNA Forum 2014, Bamberg}, language = {en} } @article{LedentsovDuesterVolketal., author = {Ledentsov, Dmitry and D{\"u}ster, Alexander and Volk, Wolfram and Wagner, Marcus and Heinle, Ingo and Rank, Ernst}, title = {Model adaptivity for industrial application of sheet metal forming simulation}, series = {Finite Elements in Analysis and Design}, volume = {46}, journal = {Finite Elements in Analysis and Design}, number = {7}, doi = {10.1016/j.finel.2010.02.006}, pages = {585 -- 600}, abstract = {finite element simulation of sheet metal forming, shell elements are widely used. The limits of applicability of the shell elements are sometimes disregarded, which leads to an error in predictions of important values such as springback geometry. The underlying kinematic assumptions of the shell elements do not hold where the thickness of In the metal sheet approaches the value of the radius of curvature. Complex three-dimensional material behavior effects cannot be represented precisely as the result of the simplified kinematics. Here we present a model adaptivity scheme based on a model error indicator. The model-adaptive technique presented in this paper aides to resolve only the critical areas of the structure with a three-dimensional discretization while keeping reasonable computational cost by utilizing shell elements for the rest of the structure. The model error indicator serves as a guide for subsequent automatic adaptive re-meshing of the work-piece followed by a model-adaptive finite element analysis. The accuracy of the approximation obtained by the model-adaptive technique coincides well with that of a more expensive solution obtained with solid elements only.}, language = {en} } @misc{Dendorfer, author = {Dendorfer, Sebastian}, title = {The influence of modeling parameters in the AnyBody Modeling System on muscle and joint loading in the shoulder}, series = {International Shoulder Group Meeting}, volume = {05}, journal = {International Shoulder Group Meeting}, language = {en} } @misc{SchubertSeign, author = {Schubert, Martin J. W. and Seign, Stefan}, title = {Arrangement for Measuring Capacitance}, language = {en} } @article{LeeSchubertOoietal., author = {Lee, Wai-Kong and Schubert, Martin J. W. and Ooi, Boon Yaik and Ho, Stanley Jian-Qin}, title = {Multi-source energy harvesting and storage for floating wireless sensor network nodes with Long Range Communication Capability}, series = {IEEE Transactions on Industry Applications}, volume = {54}, journal = {IEEE Transactions on Industry Applications}, number = {3}, publisher = {IEEE}, doi = {10.1109/TIA.2018.2799}, pages = {2606 -- 2615}, abstract = {Wireless sensor networks are widely used for environmental monitoring in remote areas. They are mainly composed of wireless sensor nodes, usually powered by batteries with limited capacity, but are expected to communicate in long range and operate for extended time periods. To overcome these limitations, many energy harvesting techniques are proposed to power wireless nodes for prolonged operation, whereas multihop techniques are utilized to extend the communication range. In this paper, a novel floating device with multisource energy harvesting technology that can be used as a wireless sensor node is proposed. The long range communication between wireless sensor nodes and a gateway is established through LoRa technology. In addition to conventional solar panels, an energy harvesting technique based on thermoelectric generators exploiting thermal differences created between water surface and materials exposed to sunlight is proposed. Energy generated from photovoltaic and thermoelectric generators is combined to power the wireless sensor node. This floating device consumes 6.6216 Wh per day when used as a wireless sensor node for the collection and transmission of environmental data. The sensor node can operate on a water surface for at least 9.6 days when it is not exposed to sunlight. During a sunny day, the floating device can harvest 8.375 Wh from solar panels and 0.425 Wh from thermoelectric generation. In other words, the floating device harvests sufficient energy to be self-sustaining during sunny days.}, language = {en} } @inproceedings{LeeSchubertHo, author = {Lee, Wai-Kong and Schubert, Martin J. W. and Ho, Stanley Jian-Qin}, title = {Multi-source energy harvesting and storage for floating wireless-sensor-network nodes}, series = {2016 IEEE Industrial Electronics and Applications Conference (IEACon 2016), 20.-22. Nov. 2016, Kota Kinabalu, Malaysia}, booktitle = {2016 IEEE Industrial Electronics and Applications Conference (IEACon 2016), 20.-22. Nov. 2016, Kota Kinabalu, Malaysia}, isbn = {9781509009268}, language = {en} } @inproceedings{Schubert, author = {Schubert, Martin J. W.}, title = {System Contemplations for Precision Irrigation in Agriculture}, series = {AIP Conference Proceedings}, volume = {1828}, booktitle = {AIP Conference Proceedings}, number = {1}, isbn = {9780735414969}, doi = {10.1063/1.4979393}, abstract = {This communication contemplates political, biological and technical aspects for efficient and profitable irrigation in sustainable agriculture. A standard for irrigation components is proposed. The need for many, and three-dimensionally distributed, soil measurement points is explained, thus enabling the control of humidity in selected layers of earth. Combined wireless and wired data transmission is proposed. Energy harvesting and storage together with mechanical sensor construction are discussed.}, language = {en} } @article{Schubert, author = {Schubert, Martin J. W.}, title = {An Analog Node Model for VHDL Based Simulation of RF Integrated Circuits}, series = {IEEE Transactions on Circuits and Systems I, Regular Papers}, volume = {56}, journal = {IEEE Transactions on Circuits and Systems I, Regular Papers}, number = {12}, doi = {10.1109/TCSI.2009.2027799}, pages = {2717 -- 2727}, abstract = {This paper describes a very-high-speed integrated-circuit hardware description language (VHDL)-based analog-node model, an associated driver component for the mixed-signal event-driven (MixED) simulation technique, and some primitive device models applied to radio-frequency integrated circuits. With the presented MixED method, analog circuits are modeled as a composition of controlled sources. Unlike other VHDL-based analog simulation methods, these MixED sources compute not only a real number representing an output voltage but also an output impedance. This allows the outputs of several MiXED sources to be connected in order to drive the same node signal n . The voltage of this record-type signal is automatically computed at its element n . u by resolution functions in compliance with Kirchhoff's current law. The data structure of the node signal n , its self-defined resolution functions, and an associated driver component are presented and discussed to meet different simulation requirements, such as speed, versatility, current accuracy, and adaptive time stepping. Several examples demonstrate how to behaviorally model mixed-signal components with this method with an emphasis on the simulation of a heterodyne receiver. Simulation speeds are compared to VHDL-AMS tools.}, language = {en} } @inproceedings{Schubert, author = {Schubert, Martin J. W.}, title = {VHDL Based Simulation of a Delta-Sigma A/D Converter Clocked with a Phase-Locked Loop}, series = {Design, Automation and Test in Europe, DATE'2001 Conference, March 13-16 2001, Munich}, booktitle = {Design, Automation and Test in Europe, DATE'2001 Conference, March 13-16 2001, Munich}, abstract = {The VHDL based mixed-signal event-driven (MixED) simulation method is employed to simulate a comprehensive system containing a number of mixed-signal building blocks: an analog waveform generator, a phase-locked loop and two ∆Σ modulators for A/D conversion.}, language = {en} } @inproceedings{BartschSchubert, author = {Bartsch, Ernst and Schubert, Martin J. W.}, title = {Mixed Analog-Digital Circuit Modeling Using Event-Driven VHDL}, series = {IEEE/VIUF International Workshops on Behavioral Modeling and Simulation (BMAS'97), Ocotober 20/21 1997, Washington D.C., USA}, booktitle = {IEEE/VIUF International Workshops on Behavioral Modeling and Simulation (BMAS'97), Ocotober 20/21 1997, Washington D.C., USA}, abstract = {The mixed-signal event-driven (MixED) method developed to simulate small portions of analog circuitry within a digital environment is demonstrated in a mixed signal application. The MixED models using concurrent iteration to account for analog nodes were coded and run in standard VHDL'93. Networks containing linear components such as sources, resistors, capacitors, inductors and operational amplifiers are presented. The possibility to manipulate resistors during runtime is used to simulate switches.}, language = {en} } @inproceedings{Schubert, author = {Schubert, Martin J. W.}, title = {Operational Amplifier Modeling Using Event-Driven VHDL}, series = {IEEE/VIUF International Workshops on Behavioral Modeling and Simulation (BMAS'97), October 20/21 1997, Washington D.C., USA}, booktitle = {IEEE/VIUF International Workshops on Behavioral Modeling and Simulation (BMAS'97), October 20/21 1997, Washington D.C., USA}, abstract = {A method to model high-gain feedback-loop analog amplifiers on an event driven timeaxis is presented. The demonstrator is coded in digital VHDL'93. In the event-driven scheme any node in the network must converge „on its own" based on the information delivered from its neighbors, as no overall matrix is set up. For this reason signalloops with a loop gain larger than one are typically unstable. This communication presents a numerically stable generic model for high gain amplifiers with a userdefined feedback network. Non-ideal effects like offset or finite gain can be taken into account.}, language = {en} } @misc{Schubert, author = {Schubert, Martin J. W.}, title = {Feedback-nach-Feedforward-Transformation zur Verhaltensmodellierung r{\"u}ckgekoppelter Verst{\"a}rker}, language = {de} } @inproceedings{MartinsWagnerWagnerHaufeetal., author = {Martins-Wagner, Magda and Wagner, Marcus and Haufe, Andr{\´e} and Liebold, Christian}, title = {A Graphical User Interface for Simulating Resin-Transfer-Molding Combining LS-DYNA and OpenFOAM}, series = {10th European LS-DYNA Conference 2015, W{\"u}rzburg, Germany}, booktitle = {10th European LS-DYNA Conference 2015, W{\"u}rzburg, Germany}, abstract = {The paper describes parts of the joint research project Swim-RTM including several industrial and academic partners. Its goal is to combine LS-DYNA and the open-source CFD solver OpenFOAM to simulate the production process of continuous fiber-reinforced plastics, particularly the resin-transfer-molding (RTM) process, in which the layers of dry fabric (unidirectional or woven) are formed in the mold (draping) and then filled with liquid resin with high pressure at injection points. Through a combined analysis of both the structural mechanical and the fluid dynamical phases, a better prediction and thereby optimization of the textile components properties as well as injection points can be achieved, improving the manufacturing process. The draping simulation of the fabric layers is carried out with LS-DYNA, while the injection simulation of the matrix material is performed in full 3D with OpenFOAM. A key question in this research project is how local porosities can be derived from the structural computation in the draping step. The purpose of the presented subproject is to develop a graphical user interface (GUI) to enable the simulation of the entire RTM process of long-fiber-reinforced components including the transfer of results between the draping and injection phases. The complete simulation task is relatively complex and involves several software packages, meaning a high effort for the user to get familiarized with. To circumvent this, the GUI aims at requiring from the user only the minimum necessary input data, creating and running the simulation and mapping tasks in the background, and showing graphically all demanded intermediate and final results. For the draping step several current fabric materials such as *MAT_034, *MAT_234, *MAT_235, *MAT_249 are available. Several modelling techniques for the composite setup are also conceivable, including a workflow similar to metal forming applications. In the injection step the fabric is modelled as a porous medium and different transport models and liquid resin types are at hand. For the data transfer between the draping and injection models, i.e. the mapping of data between shell and volume meshes within the developed GUI, first the OpenFOAM volume mesh is converted to LS-DYNA format and the necessary passing parameters are extracted from the output files, then the mapping tool DYNAmap [3] from DYNAmore GmbH is invoked, and finally the OpenFOAM command files are created. After the injection simulation is started and successfully terminated, information, such as the distribution of air inclusions or the shear stress distribution to analyze the reorientation of component fibers, is available and can be transferred from the 3D fluid mesh to an LS-DYNA shell mesh for further computations, for instance a crash simulation. This backward data mapping between volume and shell meshes can then be performed inside the GUI.}, language = {en} } @techreport{EmmertGlueckFreilingeretal., author = {Emmert, Michael and Gl{\"u}ck, Sven and Freilinger, Eva and Brandl, Dominik and Schindler, Sebastian and Kaul, Nicolas and Rasp, Franziska and Akstaller, Monika and Wetzel, Daniel and Jupke, Michael and Bodensteiner, Michael and Hohlfeld, Philipp and B{\"o}hm, Kevin and Brem, Theresa and Hammer, Pascal and Singer, Thomas and Karing, Maria and Schneider, Viola and Ostermeier, Tobias}, title = {FMS-Berichte (Mai 2021)}, editor = {Meier, Hans and Niemetz, Michael and Reindl, Andrea}, address = {Regensburg}, doi = {10.35096/othr/pub-1915}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-19155}, pages = {99}, abstract = {Dieser Bericht entstand auf Initiative der Studierenden des 2020 neu gegr{\"u}ndeten Masterstudiengangs „Elektro- und Informationstechnik (MEI)", die an der Pflichtlehrveranstaltung „Forschungsmethoden und Seminar (FMS)" im Wintersemester 2020/21 teilnahmen. Diese Lehrveranstaltung hat das Ziel, systematisch an das wissenschaftliche Arbeiten, speziell die Wissenschaftskommunikation, heranzuf{\"u}hren. Daher war geeignete Literatur zu einem individuellen Thema zu recherchieren, Ver{\"o}ffentlichungen auf ihre Relevanz hin zu beurteilen und letztendlich eine eigene Ausarbeitung basierend auf der Literaturrecherche zu erarbeiten und diese in einem Vortrag zu pr{\"a}sentieren. Parallel dazu erfolgte im Theorieteil die entsprechende Hinf{\"u}hrung zu den verschiedenen Elementen der Wissenschaftskommunikation: • Bedeutung der Wissenschaftskommunikation f{\"u}r die Arbeit der Ingenieure in Forschung und Entwicklung • Literaturrecherche, Suchmaschinen, Sichtung und Analyse vorhandener Publikationen, Bewertung der Qualit{\"a}t aufgefundener Fachliteratur, Auswahl geeigneter Materialien f{\"u}r die eigene Arbeit • Aufbereitung und Darstellung der recherchierten technischer Inhalte in Form einer seitenanzahlbegrenzten wissenschaftlichen Ausarbeitung • Einhalten formaler Randbedingungen bzgl. Strukturierung, einschl. Bildnachweise und Zitationsstile • Peer-review-Prozess bei wertsch{\"a}tzender Beurteilung der Leistung anderer • Publikumsangepasstes Aufbereiten komplexer fachlicher Inhalte mit hochschul{\"o}ffentlicher Pr{\"a}sentation der Ergebnisse • F{\"u}hren m{\"u}ndlicher wissenschaftlicher Diskurse Nachdem die Masterstudierenden in der Regel {\"u}ber noch keine eigene wissenschaftliche Forschungserfahrung bzw. -inhalte verf{\"u}gen, lag der w{\"a}hlbare Schwerpunkt der Literatursuche auf der Bearbeitung von vorgegeben aktuellen technischen oder gesellschaftspolitischen Forschungsthemen.}, language = {de} } @inproceedings{SchubertBloedelConradietal., author = {Schubert, Martin J. W. and Bl{\"o}del, J. and Conradi, P. and Lafosse, P. and Nebel, W. and Neusser, S. and Ryba, M. and Schr{\"o}der, D.}, title = {Extending EDIF for Technology Data}, series = {EDIF World Conference, 1989, San Jose, CA, USA, 11.-14. September}, booktitle = {EDIF World Conference, 1989, San Jose, CA, USA, 11.-14. September}, language = {en} } @inproceedings{SchubertSeignDaietal., author = {Schubert, Martin J. W. and Seign, Stefan and Dai, Q. and Hinterseer, Sebastian and Pielmeier, F. and Pietsch, Alexander and Seebauer, C. and Weiß, Josef and Yu, C. and Zenger, Stefan}, title = {Capacitive Sensor Technology for Soil Moisture Monitoring Networks}, series = {24th IEEE International Conference on Electronics, Circuits and Systems (ICECS), 5-8 Dec. 2017, Batumi, Georgia}, booktitle = {24th IEEE International Conference on Electronics, Circuits and Systems (ICECS), 5-8 Dec. 2017, Batumi, Georgia}, doi = {10.1109/ICECS.2017.8292018}, pages = {190 -- 193}, abstract = {A sensor technology for tracking soil-moisture in agricultural fields is presented. A linear measurement method was developed to satisfy the need for cheap sensors with wide range of capacitance change such as factor 30. A combined wired and wireless network transmits data to a server. Various battery aspects are compared with respect to use in agriculture.}, language = {en} } @inproceedings{Schubert, author = {Schubert, Martin J. W.}, title = {Mixed-Signal Event-Driven Simulation of a Phase-Locked Loop}, series = {IEEE/VIUF International Workshops on Behavioral Modeling and Simulation (BMAS'99), October 4-6 1999, Orlando, Florida, USA}, booktitle = {IEEE/VIUF International Workshops on Behavioral Modeling and Simulation (BMAS'99), October 4-6 1999, Orlando, Florida, USA}, abstract = {The mixed-signal event-driven (MixED) simulationalgorithm using standard VHDL is capable of modelinga number of analog and mixed-signal problems in digital circuits, e.g. RCL networks representing pads or wires, charge pumps, dynamic logic, voltage-controlledoscillators, phase-locked loops, etc. Important featuresare single-kernel simulation as well as rapid A/D andD/A interfacing. This paper demonstrates the simulation of a phase-locked loop (PLL), which is one of the most interesting applications of the MixED method. Many digital designs contain a PLL as only mixed-signal building block. The MixED method allows to simulate such designs with standard VHDL.}, language = {en} } @inproceedings{Schubert, author = {Schubert, Martin J. W.}, title = {VHDL Based Simulation of a Sigma-Delta A/D Converter}, series = {EEE/ACM International Workshop on Behavioral Modeling and Simulation (BMAS2000), October 19-20 2000, Orlando, Florida, USA, prodeedings}, booktitle = {EEE/ACM International Workshop on Behavioral Modeling and Simulation (BMAS2000), October 19-20 2000, Orlando, Florida, USA, prodeedings}, doi = {10.1109/BMAS.2000.888367}, abstract = {The VHDL based mixed-signal event-driven (MixED) simulation method is employed to simulate a sigma-delta modulator for A/D conversion. Results are verified by experimental data and comparison to PSpice-AD simulations.}, language = {en} } @inproceedings{LindnerBerndtPrommesbergeretal., author = {Lindner, Matthias and Berndt, Dominik and Prommesberger, Christian and Langer, Christoph and Schreiner, Rupert}, title = {Field emission assisted micro plasma discharges at vacuum and atmospheric pressures}, series = {31st International Vacuum Nanoelectronics Conference (IVNC), 2018, Kyoto, Japan}, booktitle = {31st International Vacuum Nanoelectronics Conference (IVNC), 2018, Kyoto, Japan}, doi = {10.1109/IVNC.2018.8520181}, pages = {2}, abstract = {Spatially confined non-equilibrium plasmas at vacuum and atmospheric pressure in the dimensions from a few microns to one millimeter are a promising approach to the generation and maintenance of stable glow discharges. The realization of these micro-discharges or micro-plasmas enable more accurate investigations in the field of micro plasma research. We report on field emission assisted micro plasmas excited by an alternating current with frequencies up to 1 kHz. Due to the field enhancement caused by an array of Si nano-tip structures the ignition voltage of stable plasma discharges can be reduced by 30\%.}, language = {en} } @inproceedings{BerndtLindnerTschurtschenthaleretal., author = {Berndt, Dominik and Lindner, Matthias and Tschurtschenthaler, Karl and Langer, Christoph and Schreiner, Rupert}, title = {Miniaturized Plasma Actuator Flow Measurements by MEMS-Based Thermal Conductivity Sensors}, series = {MDPI Proceedings of Eurosensors 2018, 9-12 September, Graz}, volume = {Vol.13}, booktitle = {MDPI Proceedings of Eurosensors 2018, 9-12 September, Graz}, number = {2}, doi = {10.3390/proceedings2130939}, abstract = {The gasflow created by a minaturized dielectric barrier discharge (DBD) plasma actuator is measured by a MEMS-based thermal conductivity gas sensor giving an indication of flow velocity and flow direction. The possiblity of several sensors in a small area gives a far better accuracy of local flow phenomena compared to conventional sensors. This is important for a better understanding of plasma- induced flow characteristics.}, language = {en} } @inproceedings{BerndtLindnerSchreineretal., author = {Berndt, Dominik and Lindner, Matthias and Schreiner, Rupert and Pipa, Andrei V. and Hink, R{\"u}diger and Brandenburg, Ronny and Foest, R{\"u}diger and Geils, Judith and Sander, Aljoscha and Hoffmann, Florian and Matz, Daniel and Baars, Albert and Kesel, Antonia and Max, Alexander and Caspari, Ralf}, title = {Realization of Multifunctional Surfaces Containing MEMS-based DBD Plasma Actuators and Biomimetic Structures for Flow Manipulation}, series = {AIAA Aviation 2019 Forum, 2019, Dallas}, booktitle = {AIAA Aviation 2019 Forum, 2019, Dallas}, publisher = {American Institute of Aeronautics and Astronautics, Inc}, doi = {10.2514/6.2019-2999}, language = {en} } @inproceedings{TschurtschenthalerKrenkelSchreiner, author = {Tschurtschenthaler, Karl and Krenkel, Lars and Schreiner, Rupert}, title = {Mechano-optical micro pillar sensor for biofluidmechanic wall shear stress measurements}, series = {25th Congress of the European Society of Biomechanics (ESB), July 7-10, 2019, Vienna, Austria}, booktitle = {25th Congress of the European Society of Biomechanics (ESB), July 7-10, 2019, Vienna, Austria}, language = {en} } @inproceedings{LangSteinbornSteffensetal., author = {Lang, Christian and Steinborn, Florian and Steffens, Oliver and Lang, Elmar Wolfgang}, title = {Electricity Load Forecasting - An Evaluation of Simple 1D-CNN Network Structures}, series = {International Conference on Time Series and Forecasting (ITISE 2019), Proceedings of Papers Vol. 2, 25-27 September 2019, Granada (Spain)}, booktitle = {International Conference on Time Series and Forecasting (ITISE 2019), Proceedings of Papers Vol. 2, 25-27 September 2019, Granada (Spain)}, isbn = {978-84-17970-78-9}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-16649}, pages = {797 -- 806}, abstract = {This paper presents a convolutional neural network (CNN)which can be used for forecasting electricity load profiles 36 hours intothe future. In contrast to well established CNN architectures, the inputdata is one-dimensional. A parameter scanning of network parameters isconducted in order to gain information about the influence of the kernelsize, number of filters, and dense size. The results show that a goodforecast quality can already be achieved with basic CNN architectures.The method works not only for smooth sum loads of many hundredconsumers, but also for the load of apartment buildings}, language = {en} } @article{VisscherWyssSinghetal., author = {Visscher, Rosa and Wyss, C. and Singh, Navrag B. and Taylor, William R. and Dendorfer, Sebastian and Rutz, E. and Brunner, Reinald}, title = {Influence of TAL-TATS surgery on energy production of Tricepts Surae - A musculoskeletal modeling evaluation}, series = {Gait \& Posture}, volume = {81}, journal = {Gait \& Posture}, number = {Suppl. 1}, publisher = {Elsevier}, doi = {10.1016/j.gaitpost.2020.08.090}, pages = {381 -- 382}, language = {en} } @article{KramerJonesMostafaetal., author = {Kramer, Sharlotte L. B. and Jones, Amanda and Mostafa, Ahmed and Ravaji, Babak and Tancogne-Dejean, Thomas and Roth, Christian C. and Nonn, Aida}, title = {The third Sandia fracture challenge: predictions of ductile fracture in additively manufactured metal}, series = {International Journal of Fracture}, volume = {218}, journal = {International Journal of Fracture}, publisher = {Springer Nature}, doi = {10.1007/s10704-019-00361-1}, pages = {5 -- 61}, abstract = {The Sandia Fracture Challenges provide a forum for the mechanics community to assess its ability to predict ductile fracture through a blind, round-robin format where mechanicians are challenged to predict the deformation and failure of an arbitrary geometry given experimental calibration data. The Third Challenge (SFC3) required participants to predict fracture in an additively manufactured (AM) 316L stainless steel bar containing through holes and internal cavities that could not have been conventionally machined. The volunteer participants were provided extensive data including tension and notched tensions tests of 316L specimens built on the same build-plate as the Challenge geometry, micro-CT scans of the Challenge specimens and geometric measurements of the feature based on the scans, electron backscatter diffraction (EBSD) information on grain texture, and post-test fractography of the calibration specimens. Surprisingly, the global behavior of the SFC3 geometry specimens had modest variability despite being made of AM metal, with all of the SFC3 geometry specimens failing under the same failure mode. This is attributed to the large stress concentrations from the holes overwhelming the stochastic local influence of the AM voids and surface roughness. The teams were asked to predict a number of quantities of interest in the response based on global and local measures that were compared to experimental data, based partly on Digital Image Correlation (DIC) measurements of surface displacements and strains, including predictions of variability in the resulting fracture response, as the basis for assessment of the predictive capabilities of the modeling and simulation strategies. Twenty-one teams submitted predictions obtained from a variety of methods: the finite element method (FEM) or the mesh-free, peridynamic method; solvers with explicit time integration, implicit time integration, or quasi-statics; fracture methods including element deletion, peridynamics with bond damage, XFEM, damage (stiffness degradation), and adaptive remeshing. These predictions utilized many different material models: plasticity models including J2 plasticity or Hill yield with isotropic hardening, mixed Swift-Voce hardening, kinematic hardening, or custom hardening curves; fracture criteria including GTN model, Hosford-Coulomb, triaxiality-dependent strain, critical fracture energy, damage-based model, critical void volume fraction, and Johnson-Cook model; and damage evolution models including damage accumulation and evolution, crack band model, fracture energy, displacement value threshold, incremental stress triaxiality, Cocks-Ashby void growth, and void nucleation, growth, and coalescence. Teams used various combinations of calibration data from tensile specimens, the notched tensile specimens, and literature data. A detailed comparison of results based of these different methods is presented in this paper to suggest a set of best practices for modeling ductile fracture in situations like the SFC3 AM-material problem. All blind predictions identified the nominal crack path and initiation location correctly. The SFC3 participants generally fared better in their global predictions of deformation and failure than the participants in the previous Challenges, suggesting the relative maturity of the models used and adoption of best practices from previous Challenges. This paper provides detailed analyses of the results, including discussion of the utility of the provided data, challenges of the experimental-numerical comparison, defects in the AM material, and human factors.}, language = {en} } @phdthesis{Romano, author = {Romano, Marco}, title = {Charakterisierung von gewebeverst{\"a}rkten Einzellagen aus kohlenstofffaserverst{\"a}rktem Kunststoff (CFK) mit Hilfe einer mesomechanischen Kinematik sowie strukturdynamischen Versuchen}, publisher = {Shaker}, address = {Aachen}, isbn = {978-3-8440-5177-3}, doi = {10.2370/9783844051773}, pages = {254}, abstract = {Die vorliegende Arbeit behandelt die analytische und numerische Identifikation einer mesomechanischen Kinematik in gewebeverst{\"a}rkten Einzellagen sowie deren Validierung {\"u}ber die Strukturdynamik von flachen stabf{\"o}rmigen Probek{\"o}rpern aus kohlenstofffaserverst{\"a}rktem Kunststoff (CFK). Unter der Voraussetzung, dass das wiederholte Wirken der Kinematik Energie dissipiert, tr{\"a}gt sie bei zyklischer viskoelastischer Deformation zus{\"a}tzlich zur reinen viskoelastischen Werkstoffd{\"a}mpfung in gewebeverst{\"a}rkten Einzellagen bei. Die analytischen und numerischen Untersuchungen beschr{\"a}nken sich auf die Betrachtung des ebenen, zweidimensionalen Zusammenhangs einer vollst{\"a}ndigen Ondulation bzw. einer repr{\"a}sentativen Sequenz in Dickenrichtung. Zur Parameteridentifikation werden die geometrischen Abmessungen in definierten Schritten variiert. Daf{\"u}r wird der Grad der Ondulation in gewebeverst{\"a}rkten Einzellagen {\~O}=A/L als dimensionslose Kennzahl eingef{\"u}hrt. Zur Validierung der d{\"a}mpfungserh{\"o}henden Wirkung der in den analytischen und numerischen Untersuchung identifizierten mesomechanischen Kinematik in gewebeverst{\"a}rkten Einzellagen werden in experimentellen strukturdynamischen Untersuchungen frei abklingende Transversalschwingungen von einseitig fest eingespannten Probek{\"o}rpern untersucht. Im Detail werden flache stabf{\"o}rmige Probek{\"o}rper aus kohlenstofffaserverst{\"a}rktem Epoxidharz mit Lagenaufbauten aus 0°-unidirektionalen und gewebeverst{\"a}rkten Einzellagen untersucht. Die Ergebnisse der experimentellen strukturdynamischen Untersuchungen dienen schließlich der Validierung des analytischen Modells und der numerischen Berechnungen. Die d{\"a}mpfungserh{\"o}hende Wirkung der identifizierten mesomechanischen Kinematik wird schließlich in Abh{\"a}ngigkeit des eingef{\"u}hrten Grades der Ondulation {\~O} quantifiziert.}, language = {de} } @phdthesis{Putzer, author = {Putzer, Michael}, title = {Development of subject-specific musculoskeletal models for studies of lumbar loading}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:706-5924}, pages = {140}, abstract = {Anatomical differences between individuals are often neglected in musculoskeletal models, but they are necessary in case of subject-specific questions regarding the lumbar spine. A modification of models to each subject is complex and the effects on lumbar loading are difficult to assess. The objective of this thesis is to create a validated musculoskeletal model of the human body, which facilitates a subject-specific modification of the geometry of the lumbar spine. Furthermore, important parameters are identified in sensitivity studies and a case study regarding multifidus muscle atrophy after a disc herniation is conducted. Therefore, a generic model is heavily modified and a semi-automatic process is implemented. This procedure remodels the geometry of the lumbar spine to a subject-specific one on basis of segmented medical images. The resulting five models are validated with regard to the lumbar loading at the L4/L5 level. The influence of lumbar ligament stiffness is determined by changing the stiffness values of all lumbar ligaments in eleven steps during a flexion motion. Sensitivities of lumbar loading to an altered geometry of the lumbar spine are identified by varying ten lumbar parameters in simulations with each model in four postures. The case study includes an analysis of the loading of the multifidus muscle and of the lumbar discs throughout various stages of disc herniation. This time each model performs four motions with two different motion rhythms. The results indicate that lumbar motion and loading is dependent on lumbar ligament stiffness. Furthermore, subject-specific modelling of the lumbar spine should include at least the vertebral height, disc height and lumbar lordosis. The results of the case study suggest that an overloading of the multifidus muscle could follow disc herniation. Additionally, a subsequent atrophy of the muscles could expose adjacent levels to an increased loading, but these findings are highly dependent on the individual.}, subject = {Lendenwirbels{\"a}ule}, language = {en} } @inproceedings{WaetzigSchmidEhrlich, author = {W{\"a}tzig, A. and Schmid, Vinzent and Ehrlich, Ingo}, title = {Damage Modelling of Adhesive Joints Using the Cohesive Zone Model}, series = {Applied Research Conference 2016 - ARC 2016, Augsburg, 24 June 2016}, booktitle = {Applied Research Conference 2016 - ARC 2016, Augsburg, 24 June 2016}, editor = {Mottok, J{\"u}rgen and Reichenberger, Marcus and Stolle, Reinhard}, publisher = {Pro Business Verlag}, address = {Berlin}, language = {en} } @article{ValentinoSgambitterraFurgiueleetal., author = {Valentino, Piergiorgio and Sgambitterra, Emanuele and Furgiuele, Franco and Romano, Marco and Ehrlich, Ingo and Gebbeken, Norbert}, title = {Mechanical characterization of basalt woven fabric composites}, series = {Frattura ed Integrit{\`a} Strutturale (Fracture and Structural Integrity)}, volume = {8}, journal = {Frattura ed Integrit{\`a} Strutturale (Fracture and Structural Integrity)}, number = {28}, doi = {10.3221/IGF-ESIS.28.01}, pages = {1 -- 11}, abstract = {Basalt fabric composite, with different twill wave reinforcements, i.e. twill 2/2 and twill 1/3, have been studied in this work by means of experimental tests and numerical finite element (FE) simulations. As fabric reinforcements show repeating undulations of warp and fill yarn, simple mixtures law cannot be applied. As a consequence, the mesoscopic scale, lying between the microscopic and the macroscopic one, has to be taken into account to mechanically characterize a fabric reinforced composite. The aim of this work is to evaluate the stiffness of a fabric reinforced composite in warp and fill direction. In particular a numerical FE model, assuming elliptical sections and sinusoidal shape of the yarns, has been implemented and experimental tests have been carried out in order to validate the proposed model. Finally, the strength and the failure modes le orientation, have been experimentally investigated.}, language = {en} } @article{SieglEhrlich, author = {Siegl, Marco and Ehrlich, Ingo}, title = {Transformation of the Mechanical Properties of Fiber-Reinforced Plastic Tubes from the Cartesian Coordinate System into the Cylindrical Coordinate System for the Application of Bending Models}, series = {Athens Journal of Technology \& Engineering}, volume = {4}, journal = {Athens Journal of Technology \& Engineering}, number = {1}, pages = {47 -- 62}, abstract = {Fiber-reinforced plastic (FRP) tubes are used in many different industries, such as electrical engineering and pipeline construction. The tubes are frequently subjected to bending loads, depending on the application. In order that the dimensioning of the tubes can be ensured, analytical bending models are used to calculate the resulting stresses, strains and displacements in the individual layers of the laminate. This enables the making of a statement about the failure of the fiber-reinforced tube by choosing an appropriate failure criterion. For the use of these bending models, it is necessary to understand the respective underlying theory. The theory provides the basis for the mathematical description of the mechanical properties for a single-layered tube and using the relationships between the stresses and strains that occur in the Cylindrical coordinate system for this calculation step. For this reason, a redefinition of the compliance matrix from the transformation about the winding angle to the Cylindrical coordinate system and a modification of the stress and strain vectors is necessary, because the defined Cartesian coordinate system of the model cannot be used for wounded FRP tubes. The transformation causes an exchange of entries in the compliance matrix, which remain in the correct relationship between the particular stress and strains. This step is not specified and may lead to incorrect results due to the incorrect entry of compliances. The present publication refers to sketch on this issue and represent a simplification of the changeover to the level required by the bending models notation of vectors in the form of a permutation. In addition, a new name for the pre-acquisition of the redefined compliances is given to prevent confusion when entering the material law of a bending model. Finally, the permuted and redefined compliances are proved in an example to determine their accuracy.}, language = {en} } @article{RomanoEisenriedJungbaueretal., author = {Romano, Marco and Eisenried, Michael and Jungbauer, Bastian and Ehrlich, Ingo and Gebbeken, Norbert}, title = {Influence of parameters of the production process on the material quality of unidirectionally reinforced prepregs}, series = {Journal of Achievements in Materials and Manufacturing Engineering (JAMME)}, volume = {68}, journal = {Journal of Achievements in Materials and Manufacturing Engineering (JAMME)}, number = {1}, pages = {32 -- 44}, abstract = {Purpose: A prepreg production device in laboratory scale is used to develop the production process of unidirectionally reinforced prepregs. Design/methodology/approach: The aim of the prepreg production device is to impregnate different types of reinforcement fibers with an arbitrarily selectable thermoset matrix system that completely satisfies the requirements for autoclave processing. As the prepreg production device is designed and built up modularly every module corresponds one step in the process. Findings: To identify the parameters of the production process and investigate its sensitivity on the material quality of both the prepreg as an uncured semi-finished product and the composite as the cured material experimental investigations regarding the resin flow, fiber volume content, mass per unit area and void content are carried out. Overall four material combinations have been investigated, where in each case the selected impregnation temperature and the width of the impregnation gap has been reproducibly varied in selected steps. Research limitations/implications: The experimental characterization of the prepregs and of the composite material is carried out according to German standards.}, language = {en} } @inproceedings{PongratzEhrlich, author = {Pongratz, Christian and Ehrlich, Ingo}, title = {Structural Dynamic Analysis of Thin Composite Plates Using Noncontact Measurement and Excitation}, series = {Applied Research Conference 2016 - ARC 2016, Augsburg, 24 June 2016}, booktitle = {Applied Research Conference 2016 - ARC 2016, Augsburg, 24 June 2016}, editor = {Mottok, J{\"u}rgen and Reichenberger, Marcus and Stolle, Reinhard}, publisher = {Pro Business Verlag}, address = {Berlin}, isbn = {978-3-86460-494-2}, pages = {351 -- 358}, language = {en} } @misc{RueckBierlLechneretal., author = {R{\"u}ck, Thomas and Bierl, Rudolf and Lechner, Alfred and Graf, Antonia and Dams, Florian and Schreiner, Rupert and Auchter, Eberhard and Kriz, Willy and Deubzer, MIchael and Schiller, Frank and Mottok, J{\"u}rgen and Niemetz, Michael and Margull, Ulrich and Hagel, Georg and Utesch, Matthias and Waldherr, Franz and B{\"o}hm, Matthias and Fraunhoffer, Judith and Gardeia, Armin and Schneider, Ralph and Streubel, Janet and Landes, Dieter and Studt, Reimer and Peuker, Dominik and Scharfenberg, Georg and Hook, Christian and Schuster, Dietwald and Ehrlich, Ingo and Dinnebier, Heinrich and Briem, Ulrich and L{\"a}mmlein, Stephan and Koder, Alexander and Bialek, Adam and Genewsky, Axel and Neumeier, Michael and Schlosser, Philipp and Rabl, Hans-Peter and Paule, Matthias and Galster, Christoph and Schiedermeier, Michael and Zwickel, Andreas and Hobmeier, Christoph and Bischoff, Tobias and Rill, Georg and Schaeffer, Thomas and Arbesmeier, Martin and Groß, Andreas and Schlegl, Thomas and Becker, Mark and Senn, Konrad and Schliekmann, Claus and Scholz, Peter and Sippl, Christian and Grill, Martin}, title = {Forschungsbericht 2011 / Hochschule f{\"u}r Angewandte Wissenschaften - Fachhochschule Regensburg}, editor = {Eckstein, Josef}, address = {Regensburg}, organization = {Hochschule f{\"u}r Angewandte Wissenschaften Regensburg}, issn = {1868-3533}, doi = {10.35096/othr/pub-732}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-7321}, language = {de} } @inproceedings{ŁawrowskiSchreinerLinghuetal., author = {Ławrowski, Robert Damian and Schreiner, Rupert and Linghu, Shuangyi and Gu, Fuxing}, title = {Field Emission Behaviour of Single-Crystal Pd Nanowires}, series = {33rd International Vacuum Nanoelectronics Conference (IVNC): 6-10 July 2020, Lyon, France}, booktitle = {33rd International Vacuum Nanoelectronics Conference (IVNC): 6-10 July 2020, Lyon, France}, publisher = {IEEE}, isbn = {978-1-7281-9454-7}, doi = {10.1109/IVNC49440.2020.9203510}, pages = {1 -- 2}, abstract = {Single-crystal Pd nanowires with typically 100 nm diameters and lengths from several micrometers to tens of micrometers were grown on Al 2 O 3 substrates in a furnace with Ar atmosphere. Integral field emission measurements of such samples after Pd coating (~10 nm) were performed in a diode configuration with a 50 μm mica spacer in a vacuum chamber at pressures of about 10 -9 mbar. The IV measurement of the sample shows an integral emission current up to 2 μA at a voltage of 500 V (10 MV/m) and an onset voltage for a current of 1 nA of about 275 V. The corresponding Fowler-Nordheim plot show a linear behavior, like expected for a metal needle.}, language = {en} } @inproceedings{ŁawrowskiHausladenSchreiner, author = {Ławrowski, Robert Damian and Hausladen, Matthias and Schreiner, Rupert}, title = {Individually Addressable Fully Integrated Field Emission Electron Source Fabricated by Laser Micromachining of Silicon}, series = {33rd International Vacuum Nanoelectronics Conference (IVNC): 6-10 July 2020, Lyon}, booktitle = {33rd International Vacuum Nanoelectronics Conference (IVNC): 6-10 July 2020, Lyon}, publisher = {IEEE}, isbn = {978-1-7281-9454-7}, doi = {10.1109/IVNC49440.2020.9203470}, pages = {1 -- 2}, abstract = {A cathode with individually addressable Si tips allows the observation of the activation procedure and emission behaviour of each field emission emitter at any time of the measurement. The cathode consists of an array of 2x2 conically shaped emitter structures, which were fabricated by laser micromachining and wet etching of a Si substrate bonded on a glass carrier. Using the same process, a Si extractions grid was fabricated and mounted onto the emitter. Integral field emission measurements were performed in a diode configuration in a vacuum chamber at pressures of about 10- 9 mbar. The emitters show an onset voltage between 200 V and 300 V. The emission current for each emitter on the cathode was regulated to a given value (1.0 μA, 2.5μA, 5.0μA) by an external regulating circuit and was recorded individually during the measurement. With such approach, the relation between the emission behaviour and the geometry of emitters can be studied in detail. In addition, the current stabilization of each emitters of an array can be investigated, which led to a current stability of better than 0.5\%.}, language = {en} } @misc{DuesbergBachmannEdleretal., author = {D{\"u}sberg, Felix and Bachmann, Michael and Edler, Simon and Pahlke, Andreas and Langer, Christoph and Prommesberger, Christian and Schreiner, Rupert and Bunert, Erik and Wendt, Cornelius and Zimmermann, Stefan}, title = {Novel Non-Radiative Electron Source}, series = {43rd International Symposium of Capillary Chromatography \& 16h GC x GC Symposium 2019}, journal = {43rd International Symposium of Capillary Chromatography \& 16h GC x GC Symposium 2019}, abstract = {Recently a non-radioactive electron capture detector based on a thermionic electron emitter has been demonstrated [1]. Using field emitter arrays (FEAs) would yield non-radioactive portable low power devices with fast switching capability. By combining FEAs with a vacuum-sealed housing and an electron transparent membrane window, such electron sources can be operated in an ambient pressure environment.}, language = {en} } @article{LangerPrommesbergerŁawrowskietal., author = {Langer, Christoph and Prommesberger, Christian and Ławrowski, Robert Damian and Schreiner, Rupert and Serbun, Pavel and M{\"u}ller, G{\"u}nter and D{\"u}sberg, Felix and Hofmann, Martin and Bachmann, Michael and Pahlke, Andreas}, title = {Field emission properties of p-type black silicon on pillar structures}, series = {Journal of Vacuum Science \& Technology B}, volume = {34}, journal = {Journal of Vacuum Science \& Technology B}, number = {2}, doi = {10.1116/1.4943919}, abstract = {Arrays of black silicon field emission pillar structures were fabricated on p-type silicon substrates. Two types of samples with the same number of pillars (arrays of 10 × 10) but different pillar heights (8 and 20 μm) were prepared as well as a black silicon reference sample without pillars. The field emission properties of these cathodes were investigated both by means of integral current-voltage measurements and by field emission scanning microscopy. Samples with a pillar height of 20 μm revealed onset fields as low as 6.4 V/μm, field enhancement factors up to 800, and emission currents up to 8 μA at an applied field of 20 V/μm. Due to the p-type material, a saturation of the emission current for fields above 11 V/μm was observed. This saturation leads to a stable operation with a current fluctuation of less than ±8\%. It was found that samples with a pillar height of 20 μm showed improved emission characteristics compared to samples with a pillar height of 8 μm or without pillars. The voltage maps revealed an increased emission homogeneity after a "burn-in" sequence of the sample. The current map showed that a few of the pillars dominate the emission. Integral current stability measurements were performed under different vacuum pressures, in order to investigate altered emission behavior and a potential degradation of the emitters. At pressures above 10-6 mbar, the sample starts to degrade irreversibly. Nevertheless, even after a harsh treatment over 30 min at 5 × 10-5 mbar and at an applied field of 23 V/μm, the cathode was still operating, and did not fail during further operation over 20 h at 5 × 10-8 mbar and at an applied field of 28 V/μm.}, language = {en} } @article{MingelsPorshynPrommesbergeretal., author = {Mingels, Stephan and Porshyn, Vitali and Prommesberger, Christian and Langer, Christoph and Schreiner, Rupert and L{\"u}tzenkirchen-Hecht, Dirk and M{\"u}ller, G{\"u}nter}, title = {Photosensitivity of p-type black Si field emitter arrays}, series = {Journal of Applied Physics}, volume = {119}, journal = {Journal of Applied Physics}, number = {16}, doi = {10.1063/1.4948328}, abstract = {We have investigated the properties of black Si field emitter arrays under strong electric fields and laser illumination. A low onset field of 1.8 MV/m for an emission current of 1 nA was obtained. A pronounced saturation region of the dark and photo-enhanced current was observed, which provided a short-term stability of 0.1\% at 0.4 μA and 0.7\% at 1.0 μA, respectively. As maximum value for the photosensitivity, an on-off current switching ratio of 43 reaching about 13 μA was achieved at a laser power of 15 mW. Electron spectra in the dark and under laser illumination are presented, showing a current and light-sensitive voltage drop across the emitters as well as hints for hot electron emission.}, language = {en} } @article{BachmannDamsDuesbergetal., author = {Bachmann, Michael and Dams, Florian and D{\"u}sberg, Felix and Hofmann, Martin and Pahlke, Andreas and Langer, Christoph and Ławrowski, Robert Damian and Prommesberger, Christian and Schreiner, Rupert and Serbun, Pavel and L{\"u}tzenkirchen-Hecht, Dirk and M{\"u}ller, G{\"u}nter}, title = {Extraction of the characteristics of current-limiting elements from field emission measurement data}, series = {Journal of Vacuum Science \& Technology B}, volume = {35}, journal = {Journal of Vacuum Science \& Technology B}, number = {2}, doi = {10.1116/1.4971768}, abstract = {In this contribution, the authors will present an algorithm to extract the characteristics of nonideal field emission circuit elements from saturation-limited field emission measurement data. The method for calculating the voltage drop on current-limiting circuit elements is based on circuit theory as well as Newton's method. Since the only assumption the authors make on the current-limiting circuit is a connection in series, this method is applicable to most field emission data showing saturation. To be able to determine the significance of any parameter output, the uncertainties of data and extracted parameters as well as the parameter correlations are fully taken into account throughout the algorithm. N-type silicon samples with varying external serial resistors are analyzed. All results show a good agreement to the nominal resistor values. Additionally, several p-type samples are analyzed, showing a diodelike behavior. The extracted current-limiting characteristics of the p-type samples are in good agreement with a pn-junction model. The stability of the emission current of the p-type samples is measured by constant voltage measurements and compared to the extracted current-limiting characteristics. The application of the algorithm to measurement data shows that the given algorithm is a valuable tool to analyze field emission measurement data influenced by nonemissive processes.}, language = {en} } @article{PrommesbergerBachmannDuesbergetal., author = {Prommesberger, Christian and Bachmann, Michael and D{\"u}sberg, Felix and Langer, Christoph and Ławrowski, Robert Damian and Hofmann, Martin and Pahlke, Andreas and Schreiner, Rupert}, title = {Regulation of the Transmitted Electron Flux in a Field-Emission Electron Source Demonstrated on Si Nanowhisker Cathodes}, series = {IEEE Transactions on Electron Devices}, volume = {64}, journal = {IEEE Transactions on Electron Devices}, number = {12}, publisher = {IEEE}, issn = {5128-5133}, doi = {10.1109/TED.2017.2763239}, abstract = {We report on a method to stabilize the transmitted electron flux in a field-emission electron source using an external regulation circuit. The electron source was realized with an array of silicon (Si) nanowhiskers on the top of elongated pillar structures, a mica spacer, and an extraction grid made of Si. As for most applications, the emitted electron current from the cathode is not as crucial as the transmitted electron flux through the extraction grid toward the anode. We investigated a method which allows the regulation directly by the emitted electron flux and not merely on the cathode current. By using this method, we were able to stabilize the emitted electron flux of our electron source down to values below 1\%. Simultaneously, it was shown that there is the possibility to stabilize the influencing value in the real application as well. The effectiveness of this method was demonstrated successfully with an X-ray source setup. The measured X-ray photon count rate was stabilized to a standard deviation of 0.30\% at a pressure of 1 × 10 -7 mbar. Even in harsh environment of 2 × 10 -5 mbar, a stabilization of the X-ray photon count rate down to a value of 0.63\% was achieved.}, language = {en} } @inproceedings{LindnerBerndtJungbaueretal., author = {Lindner, Matthias and Berndt, Dominik and Jungbauer, Bastian and Ehrlich, Ingo and Schreiner, Rupert and Pipa, Andrei V. and Hink, R{\"u}diger and Foest, R{\"u}diger and Brandenburg, Ronny and Max, Alexander and Caspari, Ralf}, title = {Fabrication, surface integration and testing of miniaturized dielectric barrier discharge plasma actuators for active flow control applications}, series = {AIAA Aviation 2019 Forum, 17-21 June 2019, Dallas, Texas}, booktitle = {AIAA Aviation 2019 Forum, 17-21 June 2019, Dallas, Texas}, doi = {10.2514/6.2019-2998}, language = {en} } @inproceedings{LindnerBerndtTschurtschenthaletal., author = {Lindner, Matthias and Berndt, Dominik and Tschurtschenthal, Karl and Ehrlich, Ingo and Jungbauer, Bastian and Schreiner, Rupert and Pipa, Andrei V. and Hink, R{\"u}diger and Foest, R{\"u}diger and Brandenburg, Ronny and Neuwirth, Daniel and Karpen, Norbert and Bonaccurso, Elmar and Weichwald, Robert and Max, Alexander and Caspari, Ralf}, title = {Aircraft Icing Mitigation by DBD-based Micro Plasma Actuators}, series = {AIAA AVIATION 2020 FORUM: June 15-19, 2020}, booktitle = {AIAA AVIATION 2020 FORUM: June 15-19, 2020}, doi = {10.2514/6.2020-3243}, abstract = {We present the application of plasma actuators as a technology for ice prevention at airfoils. The miniaturized dielectric barrier discharge (DBD) plasma actuators (PA) were fabricated by means of microelectromechanical systems (MEMS). We elucidate how to make the actuator samples scalable and applicable to any desired shape by the use of flexible inorganic zirconia substrates. For this purpose, we applied our developed embedding method to integrate the micro actuators in modern carbon/glass fiber reinforced polymer (CFRP/GFRP) materials. Next, the embedded actuator samples were mounted on a mechanical air profile-like fixture and placed in the icing wind tunnel iCORE. The samples were tested in rime ice conditions at temperatures of -15 to -20° C and air speeds up to 30 m/s. Unlike other groups we used a thin film zirconia substrate as dielectric for the plasma actuator. Due to the low substrate thickness of just 150 µm, an operating voltage of 2 kVRMS is already sufficient enough for a stable plasma formation. The experiments show that the operated actuator was able to prevent the ice formation and first indications of a De-icing function were also found. Hence, we show that it is feasible to realize an anti-icing system with zirconia-based plasma actuators operated at lower voltages compared to conventional ones.}, language = {en} } @article{HerrmannBuettner, author = {Herrmann, Frank and B{\"u}ttner, Simon}, title = {Automatische Qualit{\"a}tskontrolle mittels Maschinellem Lernen und SAP Leonardo}, series = {Anwendungen und Konzepte der Wirtschaftsinformatik}, journal = {Anwendungen und Konzepte der Wirtschaftsinformatik}, number = {10}, publisher = {AKWI}, issn = {2296-4592}, pages = {46 -- 53}, abstract = {In vielen Unternehmen werden von Menschen durch Ansehen von Produkten Produktionsfehler identifiziert. Die {\"u}bersehenen Produktionsfehler f{\"u}hren zunehmend h{\"a}ufiger zu teuren Kundenreklamationen. F{\"u}r die Produktion von Fußb{\"a}llen wird in dieser Arbeit diese manuelle Qualit{\"a}tssicherung analysiert. Als Alternative werden die Fußb{\"a}lle durch einen Roboter fotografiert u nd durch maschinelles Lernen werden Produktionsfehler auf diesen digitalen Fotos identifiziert. Dieser Pr{\"u}fprozess wird in SAP Leonardo implementiert und damit wird der bereits in einem SAP System implementierte Produktionsprozess (bzw. Unternehmensprozess) erweitert, wodurch ein durchg{\"a}ngig digitalisierter Gesamtprozess implementiert wird. Dadurch werden signifikant bessere Pr{\"u}fergebnisse erreichtb und die Durchlaufzeit des Pr{\"u}fprozesses wird substantiell reduziert.}, language = {de} } @article{PrommesbergerLangerŁawrowskietal., author = {Prommesberger, Christian and Langer, Christoph and Ławrowski, Robert Damian and Schreiner, Rupert}, title = {Investigations on the long-term performance of gated p-type silicon tip arrays with reproducible and stable field emission behavior}, series = {Journal of Vacuum Science \& Technology B}, volume = {35}, journal = {Journal of Vacuum Science \& Technology B}, number = {1}, doi = {10.1116/1.4972519}, abstract = {The authors report on the fabrication and characterization of p-type Si tip arrays with an integrated gate electrode for applications as field emission electron sources. After the reactive ion etching of the emitters, the combined thermal dry and wet oxidation was used for both the sharpening of the emitters and for the realization of an enhanced insulation layer. Au was evaporated in a self-aligned process as gate electrode. Arrays of 16 Si tips were fabricated with tip heights of about 3 μm and tip radii of about 20 nm with integrated gate electrode concentrically positioned ≈2 μm below the tip apex. Integral measurements with an additional anode showed improved field emission properties with a reproducible and stable emission behavior. A fast activation of the tips, low onset voltages of about 30 V, and moderate field emission currents up to 0.55 μA were noticed. The field emission parameters were calculated using the Fowler-Nordheim characteristics. A pronounced saturation regime was observed, and current fluctuations of less than ±1\% were investigated for 30 min. Long-term measurements were carried out for a period of more than 8 h. In the first 6 h of operation, the authors observed a drift of the emission current from 0.35 to 0.55 μA caused by an increased emission surface.}, language = {en} } @article{BreuerBachmannDuesbergetal., author = {Breuer, Janis and Bachmann, Michael and D{\"u}sberg, Felix and Pahlke, Andreas and Edler, Simon and Langer, Christoph and Prommesberger, Christian and Ławrowski, Robert Damian and Schreiner, Rupert and Serbun, Pavel and L{\"u}tzenkirchen-Hecht, Dirk}, title = {Extraction of the current distribution out of saturated integral measurement data of p-type silicon field emitter arrays}, series = {Journal of Vacuum Science and Technology B}, volume = {36}, journal = {Journal of Vacuum Science and Technology B}, number = {5}, publisher = {AIP Publishing}, doi = {10.1116/1.5035189}, abstract = {At the moment, only complicated techniques are known for the determination of array properties of field emitter arrays such as the number of active tips, the current distribution, or the individual tip radii. In this work, a method for extracting these parameters from integral measurement data is presented. A model describing the characteristics of a single emitter, including the saturation as a function of the applied voltage and the emitter radius, is developed. It is shown that experimental data of field emitter arrays can be represented as the sum of these functions and the characteristic parameters can be fitted to field emission data of an array. Using this method, the values of the radii as well as the parameters of distribution models can be determined directly. Analysis of experimental data from p-type Si emitter arrays shows that only 1-2\% of the tips contribute significantly.}, language = {en} } @article{EdlerBachmannBreueretal., author = {Edler, Simon and Bachmann, Michael and Breuer, Janis and Dams, Florian and D{\"u}sberg, Felix and Hofmann, Martin and Jakšič, Jasna and Pahlke, Andreas and Langer, Christoph and Ławrowski, Robert Damian and Prommesberger, Christian and Schreiner, Rupert}, title = {Influence of adsorbates on the performance of a field emitter array in a high voltage triode setup}, series = {Journal of Applied Physics}, volume = {122}, journal = {Journal of Applied Physics}, doi = {10.1063/1.4987134}, abstract = {In the present work, black-silicon field emitter arrays (FEAs) are investigated regarding the influence of residual gas pressure on the characteristics and lifetime in the high voltage triode setup. Current-voltage-characteristics at different pressure levels are recorded and show a decreasing emission current with rising pressure. This decrease can be explained by an increase of the work function and charging of the emitter surface caused by adsorbates. The emission current can be restored to its initial value by heating of the FEA up to 110 °C during active emission. With this regeneration procedure, an extended lifetime from about 20 h to 440 h at a residual gas pressure of 10-5 mbar is achieved.}, language = {en} } @misc{Zrenner, type = {Master Thesis}, author = {Zrenner, Louis}, title = {Modellierung des gekoppelten thermischen und hydraulischen Verhaltens von ZFSV-Bettungen bei erdverlegten H{\"o}chstspannungsleitungen}, doi = {10.35096/othr/pub-1790}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-17905}, school = {Ostbayerische Technische Hochschule Regensburg}, pages = {IX, 122}, abstract = {Durch die dezentrale Energiegewinnung, welche aus dem Fokus auf regenerative Stromerzeugung resultiert, ist ein Ausbau des {\"U}bertragungsnetzes alternativlos - auch mit Hinblick auf den steigenden Strombedarf in den kommenden Jahrzehnten. Der Ausbau ist bereits beschlossene Sache, schreitet aber schleppend voran. Die Gr{\"u}nde hierf{\"u}r sind jedoch nicht etwa Verz{\"o}gerungen in der Bauausf{\"u}hrung, sondern vor allem die Ablehnung innerhalb der Bev{\"o}lkerung gegen{\"u}ber dem Neubau von Stromtrassen. Jahrelange Planungs- und Genehmigungsphasen sowie regelm{\"a}ßige {\"A}nderungen der Trassenverl{\"a}ufe sind die Folge. Die B{\"u}rgerbewegungen gegen den Netzausbau sind meist mit auf dem Einfluss auf das Landschaftsbild, der Strahlungsbelastung oder L{\"a}rmbel{\"a}stigung begr{\"u}ndet. Eine Erdverlegung w{\"u}rde hinsichtlich dieser Probleme (trotz kurzfristiger Mehrbelastung w{\"a}hrend der Bauphase) eine Alternative darstellen, weist jedoch baubedingte Problematiken wie den Abtransport der Verlustw{\"a}rme auf. Bei einer klassischen Sandbettung h{\"a}ngt die W{\"a}rmeleitf{\"a}higkeit maßgeblich vom Wassergehalt des Sandes ab, welcher je nach Witterungslage und geologischen Gegebenheiten sehr stark schwankt. Als Folge muss die Trasse f{\"u}r den ung{\"u}nstigsten Fall und damit unwirtschaftlich bemessen werden. Im Rahmen des Forschungsprojekts „DC-CTL DBI" wurde eine gasisolierte HG{\"U}-Leitung (GIL) erdverlegt und einem Langzeitversuch unterzogen. Anstelle einer Sandbettung wurde jedoch ein zeitweise fließf{\"a}higer, selbstverdichtender Verf{\"u}llbaustoff (ZFSV) verwendet. F{\"u}r den Einsatz als thermische Bettung bietet ein ZFSV mehrere Eigenschaften, welche eine klassische Sandbettung nicht bietet. So ist mit Hinblick auf die verschweißte Aluminium-H{\"u}lle der GIL kein Verdichtungsaufwand n{\"o}tig, welcher bei aktueller Bauform zweifelsfrei in Sch{\"a}den resultieren w{\"u}rde. Dar{\"u}ber hinaus weisen Fl{\"u}ssigb{\"o}den durch den Bentonit-Gehalt eine h{\"o}here adsorbierende Oberfl{\"a}che auf, wodurch der Anteil des Haftwassers im Boden zunimmt und die W{\"a}rmeleitf{\"a}higkeit der Bettung in ihrer Konstanz positiv beeinflusst wird. Im Zuge dieser Arbeit wurden die thermischen und hydraulischen Transportprozesse um die GIL mittels FEM in Plaxis2D untersucht und transient {\"u}ber den gesamten Messzeitraum (18 Monate) berechnet. Hierf{\"u}r wurden die Materialparameter durch labortechnische Versuche ermittelt und die Messergebnisse einer verbauten Wetterstation als Randbedingungen (Niederschlag, Temperatur, Evapotranspiration) aufgebracht. Die Ergebnisse aus Plaxis2D wurden abschließend mit der im Feldversuch verbauten Sensorik verglichen. Es zeigte sich, dass sowohl die Boden- als auch die Leitertemperaturen nur um wenige Grad von den Messwerten der Sensorik abweichen. Anders als bei den etablierten analytischen Bemessungsrechnungen, welche stets auf Vereinfachungen basieren, k{\"o}nnen auch Effekte wie konvektiver W{\"a}rmetransport oder Austrocknung bei gleichzeitig h{\"o}herer Genauigkeit der Ergebnisse untersucht werden. Um den Rechenaufwand gering zu halten, wurden lediglich die thermischen und hydraulischen Entwicklungen und Einfl{\"u}sse des Bodens ber{\"u}cksichtigt. Es ist aber durchaus m{\"o}glich, Verformungen und Kr{\"a}fte in die Berechnung zu integrieren und so ein ganzheitliches Berechnungsmodell zu erstellen.}, language = {de} } @article{LauerGiordanoKreiteretal., author = {Lauer, Norina and Giordano, Katharina and Kreiter, Daniel and Leusch, Vera and Corsten, Sabine}, title = {"Mach mal 'ne App"}, series = {Forum Logop{\"a}die}, volume = {35}, journal = {Forum Logop{\"a}die}, number = {3}, publisher = {Schulz-Kirchner}, doi = {10.2443/skv-s-2021-53020210304}, pages = {20 -- 27}, abstract = {Die Entwicklung qualitativ hochwertiger Apps zur Gesundheitsversorgung erfordert einen aufwendigen Entwicklungsprozess, an den sich eine Evaluation der App-gest{\"u}tzten Maßnahme anschließen sollte, um Aussagen zur Wirksamkeit treffen und somit den App-Einsatz begr{\"u}nden zu k{\"o}nnen. In diesem Beitrag wird die nutzerzentrierte Entwicklung der App BaSeTaLK vorgestellt, mit der eine Tablet-gest{\"u}tzte Stimulation biographisch orientierter Gespr{\"a}che bei {\"a}lteren Menschen zur Verbesserung des psychischen Wohlbefindens erm{\"o}glicht werden soll. Nach erfolgreicher Evaluation k{\"o}nnten Logop{\"a}dInnen als MultiplikatorInnen den Einsatz der App vermitteln.}, subject = {App}, language = {de} } @misc{OPUS4-1186, title = {Geschlechtergerechtigkeit und MINT}, editor = {Rudolph, Clarissa and Reber, Anne and Dollsack, Sophia}, publisher = {Verlag Barbara Budrich}, address = {Opladen ; Berlin ; Toronto}, isbn = {978-3-8474-1674-6}, doi = {10.3224/84742519}, pages = {277}, subject = {Hochschule}, language = {de} } @article{LuehrmannWeiss, author = {L{\"u}hrmann, Melanie and Weiss, Matthias}, title = {The Effect of Working Time and Labor Force Participation on Unemployment}, series = {Economic Modelling}, volume = {27}, journal = {Economic Modelling}, number = {1}, doi = {10.1016/j.econmod.2009.07.024}, pages = {67 -- 82}, abstract = {This paper introduces a new argument into the theoretical literature on labor market effects of changes in working hours and labor force participation. We advance a general equilibrium model in which increased labor supply reduces unskilled unemployment via consumer demand: longer work hours and higher labor force participation imply higher incomes and less (leisure) time. In consequence, home production is reduced in favor of outsourcing domestic tasks to the market, shifting consumer demand toward unskill-intensive goods. Relative demand for unskilled labor rises and unemployment falls. Finally, we provide empirical support for the basic mechanisms of our model for Germany.}, language = {en} } @incollection{BoerschSupanDuezguenWeiss, author = {B{\"o}rsch-Supan, Axel and D{\"u}zg{\"u}n, Ismail and Weiss, Matthias}, title = {Altern und Produktivit{\"a}t}, series = {Produktivit{\"a}t in alternden Gesellschaften}, booktitle = {Produktivit{\"a}t in alternden Gesellschaften}, editor = {B{\"o}rsch-Supan, Axel and Erlinghagen, Marcel and Hank, Karsten and J{\"u}rges, Hendrik and Wagner, Gert G.}, publisher = {Wissenschaftliche Verlagsgesellschaft mbH}, address = {Stuttgart}, pages = {53 -- 62}, subject = {Alternde Bev{\"o}lkerung}, language = {de} } @incollection{IlmakunnasSkirbekkvanOursetal., author = {Ilmakunnas, Pekka and Skirbekk, Vegard and van Ours, Jan and Weiss, Matthias}, title = {Ageing and Productivty}, series = {Ageing, Health, and Productivity: The Economics of Increased Life Expectancy}, booktitle = {Ageing, Health, and Productivity: The Economics of Increased Life Expectancy}, editor = {Garibaldi, Pietro}, publisher = {Oxford University Press}, address = {Oxford}, pages = {135 -- 219}, subject = {Alter}, language = {en} } @article{Weiss, author = {Weiss, Matthias}, title = {Skill-Biased Technological Change}, series = {Economics Letters}, volume = {100}, journal = {Economics Letters}, number = {3}, doi = {10.1016/j.econlet.2008.03.022}, pages = {439 -- 441}, abstract = {This paper presents a model in which perpetual skill-biased technological change does not lead to ever-increasing wage inequality. The model is consistent with the increase in wage inequality in the 1980s and the subsequent stabilization in the 1990s.}, language = {en} } @incollection{BoerschSupanDuezguenWeiss, author = {B{\"o}rsch-Supan, Axel and D{\"u}zg{\"u}n, Ismail and Weiss, Matthias}, title = {Sinkende Produktivit{\"a}t alternder Belegschaften?}, series = {L{\"a}nger leben, arbeiten und sich engagieren. Chancen werteschaffender Besch{\"a}ftigung bis ins Alter}, booktitle = {L{\"a}nger leben, arbeiten und sich engagieren. Chancen werteschaffender Besch{\"a}ftigung bis ins Alter}, editor = {Prager, Jens U. and Schleiter (Hrsg.), Andr{\´e}}, publisher = {Bertelsmann Stiftung}, address = {G{\"u}tersloh}, isbn = {3892049130}, pages = {85 -- 102}, language = {de} } @article{BoerschSupanWeiss, author = {B{\"o}rsch-Supan, Axel and Weiss, Matthias}, title = {Erfahrungswissen in der Arbeitswelt}, series = {Potenziale im Altern. Chancen und Aufgaben f{\"u}r Individuum und Gesellschaft}, journal = {Potenziale im Altern. Chancen und Aufgaben f{\"u}r Individuum und Gesellschaft}, editor = {Kruse, Andreas}, publisher = {AKA}, address = {Heidelberg}, pages = {221 -- 234}, language = {de} } @article{Weiss, author = {Weiss, Matthias}, title = {Absenteeism in Age-Diverse Work Teams}, series = {Labour Markets and Demographic Change}, journal = {Labour Markets and Demographic Change}, editor = {Kuhn, Michael and Ochsen, Carsten}, publisher = {VS Verlag}, address = {Wiesbaden}, doi = {10.1007/978-3-531-91478-7_3}, pages = {40 -- 57}, abstract = {Age-diverse work teams are being advocated as an important management tool to enhance performance and productively employ older workers. However, this advice is not founded on empirical evidence. There are very few studies that look at the relation between performance and age diversity of work teams. This lack of evidence is mainly due to a lack of available data. Information on performance and worker composition of a productive unit is available almost exclusively on the plant level in matched employer-employee data sets. But on the plant level/age heterogeneity of the workforce does not tell much about age diversity on the level where co-operation/teamwork takes place (work teams, departments, etc.). If all of the older workers work in the administration whereas all the young employees work in the production, the firm's workforce may be highly age-diverse, but work teams and departments are age-homogeneous. This problem notwithstanding, Grund and Westerg{\aa}rd-Nielsen (2005) look at the relation between productivity and the standard deviation of workers' age in a sample of 7,000 Danish firms. They find a hump-shaped relation.}, language = {en} } @article{Weiss, author = {Weiss, Matthias}, title = {Erfahrung kompensiert nachlassende F{\"a}higkeiten}, series = {Personalf{\"u}hrung}, journal = {Personalf{\"u}hrung}, number = {1}, pages = {56 -- 58}, language = {de} }