@inproceedings{DiermeierSindersbergerMonkman, author = {Diermeier, Andreas and Sindersberger, Dirk and Monkman, Gareth J.}, title = {Magneto-Active Polymer Actuator}, series = {Actuator 16 : 15th International Conference on New Actuators \& 9th International Exhibition on Smart Actuators and Drive Systems : conference proceedings}, booktitle = {Actuator 16 : 15th International Conference on New Actuators \& 9th International Exhibition on Smart Actuators and Drive Systems : conference proceedings}, publisher = {WFB}, address = {Bremen}, isbn = {978-3-933339-26-3}, pages = {286 -- 289}, abstract = {Magneto-active Polymers (MAP) are closely related to magneto-rheological fluids in that they contain magnetic micro-particles. However, instead of being freely suspended in a carrier fluid they are physically bound within a highly elastic polymer-matrix. The application of an external magnetic field allows changes in the mechanical properties, such as elastic and shear moduli, of the composite material to be achieved. The colossal magneto-rheological effect has been shown to demonstrate changes in Young's modulus by over 1E6 \%. Current research concentrates on controllable compliance and the resulting shape memory properties of MAP. This paper deals with recent advancements in this respect, including tubular magneto-active devices with potential applications in medical and other technology.}, language = {en} } @article{KalitaSnarskiiShamoninChamonineetal., author = {Kalita, Viktor M. and Snarskii, Andrei A. and Shamonin (Chamonine), Mikhail and Zorinets, Denis}, title = {Effect of single-particle magnetostriction on the shear modulus of compliant magnetoactive elastomers}, series = {Physical review E}, volume = {95}, journal = {Physical review E}, number = {3}, publisher = {American Physical Society}, doi = {10.1103/PhysRevE.95.032503}, abstract = {The influence of an external magnetic field on the static shear strain and the effective shear modulus of a magnetoactive elastomer (MAE) is studied theoretically in the framework of a recently introduced approach to the single-particle magnetostriction mechanism [V. M. Kalita et al., Phys. Rev. E 93, 062503 (2016)]. The planar problem of magnetostriction in an MAE with magnetically soft inclusions in the form of a thin disk (platelet) having the magnetic anisotropy in the plane of this disk is solved analytically. An external magnetic field acts with torques on magnetic filler particles, creates mechanical stresses in the vicinity of inclusions, induces shear strain, and increases the effective shear modulus of these composite materials. It is shown that the largest effect of the magnetic field on the effective shear modulus should be expected in MAEs with soft elastomer matrices, where the shear modulus of the matrix is less than the magnetic anisotropy constant of inclusions. It is derived that the effective shear modulus is nonlinearly dependent on the external magnetic field and approaches the saturation value in magnetic fields exceeding the field of particle anisotropy. It is shown that model calculations of the effective shear modulus correspond to a phenomenological definition of effective elastic moduli and magnetoelastic coupling constants. The obtained theoretical results compare well with known experimental data. Determination of effective elastic coefficients in MAEs and their dependence on magnetic field is discussed. The concentration dependence of the effective shear modulus at higher filler concentrations has been estimated using the method of Pade approximants, which predicts that both the absolute and relative changes of the magnetic-field-dependent effective shear modulus will significantly increase with the growing concentration of filler particles.}, language = {en} } @article{SindersbergerDiermeierPremetal., author = {Sindersberger, Dirk and Diermeier, Andreas and Prem, Nina and Monkman, Gareth J.}, title = {Printing of hybrid magneto active polymers with 6 degrees of freedom}, series = {Materials today communications}, volume = {15}, journal = {Materials today communications}, number = {June}, publisher = {Elsevier}, doi = {10.1016/j.mtcomm.2018.02.032}, pages = {269 -- 274}, abstract = {3D printing techniques offer a versatile method for the fabrication and structuring of magnetoactive polymer (MAP) components and devices for research prototype development. MAP materials enjoy an advantage in that the particulate content may be manipulated by external magnetic fields during the forming and curing processes. Controlled particle diffusion within the polymer matrix, by means of external fields applied during the printing process, influences a further three spatial dimensions. This permits control of the spatial particle concentration and makes free displacement of particle accumulations possible during the crosslinking phase. Particles which are susceptible to electric or magnetic fields can thereby be shifted into regions previously free of particles. The additional 3 graded dispersion axes effectively results in what can be described as 6 degrees of freedom (6DOF) printing. Electrically conductive polymers combined with non-conductive areas, provide an additional benefit for the production of complex hybrid structures. This may be augmented by the combination of magnetically active thermoplastics as inelastic structural components together with mechanically deformable elastomers. The combination of all fabrication methods in one hybrid printing process makes the production of complex sensor and actuator systems in one manufacturing sequence possible. This far exceeds the capabilities of conventional casting and machining operations and opens new possibilities for the fabrication of soft material elements.}, language = {en} }