@article{KloiberSchultheissSoteloetal., author = {Kloiber, Jessica and Schultheiß, Ulrich and Sotelo, Lamborghini and Sarau, George and Christiansen, Silke H. and Gavras, Sarkis and Hort, Norbert and Hornberger, Helga}, title = {Corrosion behaviour of electropolished magnesium materials}, series = {Materials Today Communications}, journal = {Materials Today Communications}, edition = {Journal Pre-proof}, publisher = {Elsevier}, doi = {10.1016/j.mtcomm.2023.107983}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-68254}, abstract = {Although magnesium and its alloys are promising candidates as biodegradable implant materials, the tendency for localized corrosion mechanism in physiological environment limit their biomedical application. Electropolishing is an attractive strategy for improving the corrosion behaviour of metals, but it is still largely unexplored in magnesium materials. In this study, the characterization of electropolished surfaces of AM50 and pure magnesium was performed, focussing on their in vitro degradation behaviour in cell medium. Corrosion rates were evaluated using potentiodynamic polarisation. The surface morphology before and after the onset of corrosion was investigated by scanning electron microscopy and confocal laser scanning microscopy. The presented electropolishing process led to improved surface performances, observable by significantly lower corrosion rates (0.08 mm·year-1 in Dulbecco's modified Eagle's medium), lower arithmetical mean height (0.05 µm), lower water contact angle (25-35°) and lower micro hardness (35-50 HV 0.1) compared to mechanically and chemically treated surfaces. MgO/Mg(OH)2 could be detected on electropolished surfaces. The localized corrosion mode could be reduced, but not entirely prevented. Electropolishing shows great potential as post-treatment of magnesium-based components, but detailed tests of the long-term corrosion behaviour are an important area of future research.}, language = {en} } @inproceedings{Chow, author = {Chow, Rosan}, title = {Design Research: Making of a Connected Discipline Part 1}, series = {15th International Conference of the European Academy of Design (EAD Conference), Online and in Person in Brazil, Finland, India, Spain and the UK, 16-20 October 2023}, booktitle = {15th International Conference of the European Academy of Design (EAD Conference), Online and in Person in Brazil, Finland, India, Spain and the UK, 16-20 October 2023}, publisher = {Editora Blucher}, address = {S{\~a}o Paulo}, issn = {2318-6968}, doi = {10.5151/ead2023-1BIL-03Posit-03Chow-1}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-67665}, pages = {200 -- 207}, abstract = {Despite the existence of societies, journals, conferences, and doctoral programs that generate increasing numbers of doctorates and research publications design research is not a coherent intellectual field with a clear boundary of its subject matter, nor an academic discipline founded on a consensual understanding of its purpose, methodology and pedagogical curriculum; subsequently, there is hardly any commonality across doctoral programs and the assessment of a doctoral degree is difficult if not impossible, so criticised the late design historian Victor Margolin. He called to unify and bound design research to solve these problems. While agreeing with his critiques and appreciating his good intentions, I will argue that his call is impractical as well as undesirable due to the social circumstances and the nature of design inquiry and the changing academic research practice which tend towards inter/transdisciplinarity. Efforts should rather be directed to join fragmented design research in an evolving and inclusive manner to establish a dynamically connected discipline.}, language = {en} } @inproceedings{Chow, author = {Chow, Rosan}, title = {Design Research: Making of a Connected Discipline Part 2}, series = {15th International Conference of the European Academy of Design (EAD Conference), Online and in Person in Brazil, Finland, India, Spain and the UK, 16-20 October 2023}, volume = {11}, booktitle = {15th International Conference of the European Academy of Design (EAD Conference), Online and in Person in Brazil, Finland, India, Spain and the UK, 16-20 October 2023}, publisher = {Editora Blucher}, address = {S{\~a}o Paulo}, issn = {2318-6968}, doi = {10.5151/ead2023-1BIL-03Posit-04Chow-2}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-67675}, pages = {208 -- 214}, abstract = {In "Design Research: Making of a Connected Discipline Part 1", I argue that the social circumstances and the nature of design inquiry and the changing academic research practice which tend towards inter/ trans-disciplinarity render building a unified and bounded discipline unrealistic and undesirable. In place of unified and bounded, I suggest connected to be a more viable concept to think about disciplinary research in design. Here in Part 2, I make some suggestions to start making of a connected discipline.}, language = {en} } @inproceedings{StauferHauserGrabingeretal., author = {Staufer, Susanne and Hauser, Florian and Grabinger, Lisa and Bittner, Dominik and Nadimpalli, Vamsi Krishna and Mottok, J{\"u}rgen}, title = {Learning elements in online learning management systems}, series = {Proceedings of the 16th annual International Conference of Education, Research and Innovation (ICERI 2023), Seville, Spain, 11/13/2023 - 11/14/2023}, booktitle = {Proceedings of the 16th annual International Conference of Education, Research and Innovation (ICERI 2023), Seville, Spain, 11/13/2023 - 11/14/2023}, editor = {G{\´o}mez Chova, Luis and Gonz{\´a}lez Mart{\´i}nez, Chelo and Lees, Joanna}, publisher = {IATED}, doi = {10.21125/iceri.2023.0815}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-67725}, pages = {3121 -- 3130}, language = {en} } @inproceedings{NeidhartGoemmel, author = {Neidhart, Thomas and G{\"o}mmel, Roland}, title = {Spreizverformungen von Erdd{\"a}mmen auf S{\"a}ulen und Pf{\"a}hlen}, series = {7. Fachtagung Geotechnik an der HTW Dresden, 23.11.2023}, booktitle = {7. Fachtagung Geotechnik an der HTW Dresden, 23.11.2023}, editor = {Ruttloff, Liane}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-67639}, abstract = {Nach Einf{\"u}hrung in die Thematik werden unter Ber{\"u}cksichtigung der EBGEO und des aktuellen Entwurfs des neuen Eurocodes 7, Teil 3 numerische Berechnungen zur Beanspruchung unbewehrter pfahlartiger Tragglieder/ Stabilisierungss{\"a}ulen aufgrund von Spreizverformungen von Erdd{\"a}mmen durchgef{\"u}hrt. Dabei werden u.a. die Materi-aleigenschaften der Tragglieder und die Dehnsteifigkeiten eingelegter Geogitter variiert sowie deren Einfl{\"u}sse auf die Verdrehung und Verbiegung der Tragglieder aufgezeigt.}, language = {de} } @incollection{FalterGoldbergGuentheretal., author = {Falter, Thomas and Goldberg, Boris and G{\"u}nther, Swen and Steffens, Oliver}, title = {Transfererfolg messbar machen}, series = {Erfolgreicher Transfer in der Arbeitsgestaltung}, booktitle = {Erfolgreicher Transfer in der Arbeitsgestaltung}, editor = {Borowski, Esther and Cernavin, Oleg and Hees, Frank and Joerißen, Theresa}, publisher = {Waxmann}, address = {M{\"u}nster}, doi = {10.31244/9783830998082}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-67568}, publisher = {Ostbayerische Technische Hochschule Regensburg}, pages = {173 -- 187}, abstract = {Hochschulen f{\"u}r angewandte Wissenschaften (HAW) kommt als regionalen Innovationstreibern eine gesellschaftliche Verantwortung durch ihre Zusammenarbeit mit Unternehmen und Gesellschaft zu. Diese Zusammenarbeit geschieht im Rahmen von Aktivit{\"a}ten des Wissens- und Technologietransfers. Die Beurteilung des Erfolgs dieser Transferaktivit{\"a}ten verursacht jedoch regelm{\"a}ßig Schwierigkeiten, da geeignete Indikatoren zur Erfolgsmessung fehlen. Im Rahmen des vom Bundesministerium f{\"u}r Bildung und Forschung (BMBF) gef{\"o}rderten Verbundforschungsprojektes Transfer_i wurde ein Modell zur Objektivierung und Messung von Forschungsleistung, forschungsbasiertem Transfer sowie dessen Umsetzung am Markt in Form von Innovationen erarbeitet. Mit dem Forschungsprojekt wurden kausale Zusammenh{\"a}nge f{\"u}r das Gelingen von Transfer identifiziert und daraufhin entsprechende Indikatoren definiert, um auf dieser Basis die Steuerung von Transferprozessen zu erm{\"o}glichen. In diesem Beitrag werden zwei im Projekt Transfer_i entwickelte Modelle und Indikatoren vorgestellt, die die Voraussetzungen f{\"u}r einen erfolgreichen Transferprozess abbilden k{\"o}nnen. Auf dieser Grundlage zeigen wir anhand eines Projekts (MAGGIE) der Ostbayerischen Technischen Hochschule (OTH) Regensburg mit mehreren regionalen Partnern, wie die vorher definierten Modelle und Indikatoren in einem konkreten Anwendungsfall verwendet werden k{\"o}nnen. Abschließend beschreiben wir die erforderlichen Rahmenbedingungen f{\"u}r die erfolgreiche Umsetzung von Transfer an Hochschulen und wie darauf bezogene Indikatoren effektiv eingef{\"u}hrt werden k{\"o}nnen.}, subject = {Angewandte Forschung}, language = {de} } @article{KastenmeierSieglEhrlichetal., author = {Kastenmeier, Andreas and Siegl, Marco and Ehrlich, Ingo and Gebbeken, Norbert}, title = {Review of elasto-static models for three-dimensional analysis of thick-walled anisotropic tubes}, series = {Journal of Composite Materials}, journal = {Journal of Composite Materials}, publisher = {Sage}, doi = {10.1177/00219983231215863}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-67521}, abstract = {Most shell or beam models of anisotropic tubes under bending have no validity for thick-walled structures. As a result, the need to develop three-dimensional formulations which allow a change in the stress, strain and displacement distributions across the radial component arises. Basic formulations on three-dimensional anisotropic elasticity were made either stressor displacement-based by Lekhnitskii or Stroh on plates. Lekhnitskii also was the first to expand these analytical formulations to tubes under various loading conditions. This paper presents a review of the stress and strain analysis of tube models using three-dimensional anisotropic elasticity. The focus lies on layered structures, like fiber-reinforced plastics, under various bending loads, although the basic formulations and models regarding axisymmetric loads are briefly discussed. One section is also dedicated to the determination of an equivalent bending stiffness of tubes.}, language = {en} } @misc{HaugSchnellRaptisetal., author = {Haug, Sonja and Schnell, Rainer and Raptis, Georgios and Dotter, Caroline and Weber, Karsten}, title = {Projekt: Privacy und Willingness to share von Gesundheitsdaten (PWG): Fragebogen}, doi = {10.35096/othr/pub-6057}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-60575}, abstract = {Befragung zum Umgang mit Gesundheitsdaten Die Studie basiert auf einer computergest{\"u}tzten Telefonbefragung (Dual-Frame) bei einer Zufallsstichprobe der Bev{\"o}lkerung (innerhalb der via ADM-Telefonstichprobe rekrutierten Teilnehmer der infas-Mehrthemenbefragung) ab 18 Jahren in Deutschland, die im Zeitraum 01.-27.06.2022 erhoben wurden (n=1.308). Der Fragebogen besteht aus 46 standardisierten Fragen inkl. Soziodemografie und 69 Items. Einzelne Fragen wurden (teilweise {\"u}bersetzt und leicht abgewandelt) {\"u}bernommen aus anderen Studien.}, language = {de} } @article{BartschBehamGebhardtetal., author = {Bartsch, Alexander and Beham, Daniela and Gebhardt, Jakob and Ehrlich, Ingo and Schratzenstaller, Thomas and Monkman, Gareth J.}, title = {Mechanical Properties of NdPrFeB Based Magnetoactive Bisphenol-Free Boron-Silicate Polymers}, series = {Journal of Nanomedicine and Nanotechnology}, volume = {14}, journal = {Journal of Nanomedicine and Nanotechnology}, number = {6}, publisher = {Walsh Medical Media}, issn = {2157-7439}, doi = {10.35248/2157-7439.23.14.705}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-67425}, abstract = {Following a ban on many materials containing bisphenol-A, new bisphenol-free Boron silicates have been found as substitutes. The purpose of this study is to describe the mechanical properties of these bisphenol-free magnetoactive borosilicate polymers containing hard magnetic particles. Samples of 0\%, 33\% and 66\% by wt. were loaded for compression using a universal testing machine. The maximum forces occurring for different travel speeds were compared before and after post-magnetization treatments. The post-magnetization included 2 stages. In addition, the change in mechanical properties within 24 hours after the post-magnetization process was investigated. Furthermore, the influence of speed and particle content were investigated. In general, there is a correlation between the required compressive force and, the level of post-magnetization stress, the increase in travel speed and particle content in the boron silicate. Comparison of the non-post-magnetized and post-magnetized samples using two-tailed t-tests shows that the p-values for all weight fraction changes in NdPrFeB particles and travel speeds are less than 0.001. Also, a comparison between tests in which the traverse speed was varied also showed significant changes in the resulting compression forces. The same is valid for changes in the weight ratio of the NdPrFeB particles in the samples. For post-magnetized samples, no significant difference can be observed in the first 24 hours following magnetization. In summary, the material presents viscoelastic, plastic force-displacement behavior, which can be well recognized by its bi-linear curve shape. The investigation shows that borosilicate polymers based on NdPrFeB can have their mechanical behavior modified and controlled by post-magnetization processes. This opens new possibilities for many future applications.}, language = {en} } @article{HaugSchnellRaptisetal., author = {Haug, Sonja and Schnell, Rainer and Raptis, Georgios and Dotter, Caroline and Weber, Karsten}, title = {Wissen und Einstellung zur Speicherung und Nutzung von Gesundheitsdaten: Ergebnisse einer Bev{\"o}lkerungsbefragung}, series = {Zeitschrift f{\"u}r Evidenz, Fortbildung und Qualit{\"a}t im Gesundheitswesen}, journal = {Zeitschrift f{\"u}r Evidenz, Fortbildung und Qualit{\"a}t im Gesundheitswesen}, publisher = {Elsevier}, issn = {1865-9217}, doi = {10.1016/j.zefq.2023.11.001}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-67461}, pages = {50 -- 58}, abstract = {Hintergrund/Zielsetzung Der Beitrag befasst sich mit dem Wissenstand und der Einstellung der Bev{\"o}lkerung. Betrachtet werden die {\"U}bermittlung und Verf{\"u}gbarkeit von Gesundheitsdaten, Gesundheitsregister, die elektronische Patientenakte, Einwilligungsverfahren f{\"u}r die {\"U}bermittlung von Daten und der Zugriff auf Gesundheitsdaten zu Forschungszwecken. Methoden Die Studie basiert auf einer computergest{\"u}tzten Telefonbefragung (Dual-Frame) bei einer Zufallsstichprobe der Bev{\"o}lkerung in Deutschland im Zeitraum 01.-27.06.2022 (n = 1.308). Ergebnisse Der Wissensstand zur {\"U}bermittlung von Gesundheitsdaten an Krankenkassen ist hoch, wohingegen das Vorhandensein zentraler Sterbe-, Impf- und Gesundheitsregister sowie der Zugriff auf Gesundheitsdaten durch behandelnde {\"A}rztinnen und {\"A}rzte {\"u}bersch{\"a}tzt werden. Die Akzeptanz medizinischer Register ist sehr hoch. Die elektronische Patientenakte ist bei der H{\"a}lfte der Bev{\"o}lkerung unbekannt, die Nutzungsbereitschaft ist eher gering ausgepr{\"a}gt; bei der {\"U}bertragung von Daten wird eine Zustimmungsoption bevorzugt, und {\"u}ber achtzig Prozent w{\"u}rden die Daten der elektronischen Patientenakte zur Forschung freigeben. Drei Viertel w{\"u}rden ihre Gesundheitsdaten allgemein zur Forschung freigeben, insbesondere an Universit{\"a}ten in Deutschland, wobei meist Anonymit{\"a}t Bedingung ist. Die Bereitschaft zur Datenfreigabe steigt mit der H{\"o}he des Vertrauens in die Presse sowie in Universit{\"a}ten und Hochschulen, und sie sinkt, wenn ein Datenleck als schwerwiegend erachtet wird. Diskussion und Schlussfolgerung In Deutschland besteht, wie in anderen europ{\"a}ischen L{\"a}ndern, eine große Bereitschaft zur Freigabe von Gesundheitsdaten zu Forschungszwecken. Dagegen ist der Wunsch zur Nutzung der elektronischen Patientenakte eher gering. Ebenso niedrig ist die Akzeptanz einer Widerspruchsoption, die jedoch als Voraussetzung f{\"u}r eine erfolgreiche Einf{\"u}hrung einer elektronischen Patientenakte gilt. Vertrauen in die Forschung und staatliche Stellen, die Gesundheitsdaten verarbeiten, sind zentrale Faktoren.}, language = {en} } @misc{OPUS4-6694, title = {Energieforschung}, edition = {Ausgabe 2016}, publisher = {OTH Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg / Regensburg Center of Energy and Resources (RCER)}, doi = {10.35096/othr/pub-6694}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-66948}, abstract = {Das Regensburg Center of Energy and Resources (RCER) b{\"u}ndelt seit 2012 die Aktivit{\"a}ten der Ostbayerischen Technischen Hochschule Regensburg (OTH Regensburg) und der regionalen Wirtschaftsunternehmen auf dem Strategiefeld „Energie und Ressourcen".}, language = {de} } @misc{OPUS4-6543, title = {Energieforschung}, edition = {Ausgabe 2020}, publisher = {OTH Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg / Regensburg Center of Energy and Resources (RCER)}, doi = {10.35096/othr/pub-6543}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-65439}, abstract = {{\"U}ber uns Das Regensburg Center of Energy and Resources (RCER) b{\"u}ndelt seit 2012 die Aktivit{\"a}ten der Ostbayerischen Technischen Hochschule Regensburg (OTH Regensburg) und der regionalen Wirtschaftsunternehmen auf dem Strategiefeld „Energie und Ressourcen". Mission: Energieforschung: vernetzen, voranbringen, vermitteln Das RCER f{\"o}rdert die Vernetzung verschiedener Disziplinen der Energieforschung innerhalb der OTH Regensburg und mit externen Partnern (Firmen, F{\"o}rdertr{\"a}gern, Forschungsinstitutionen, {\"o}ffentlichen Einrichtungen). Das RCER ist Ihr Partner beim Voranbringen von Kooperationen und Forschungsvorhaben durch Unterst{\"u}tzung in der Antragsphase, bei der Einwerbung von Projektmitteln und Projektbegleitung im Energiebereich. Das RCER steht f{\"u}r die Vermittlung von Know-how, Basiswissen, aktuellen Fragen und den Technologietransfer rund um das Thema Energie zwischen Wissenschaft, Wirtschaft, Gesellschaft und Politik. Vision Wir sind Ihr erster Ansprechpartner und Motor f{\"u}r innovative Energieforschung. Werte Verl{\"a}sslichkeit, Kompetenz, Verantwortungsbewusstsein.Regional verwurzelt und weltoffen}, language = {de} } @misc{OPUS4-6542, title = {Energieforschung}, edition = {Ausgabe 2023}, publisher = {OTH Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg / Regensburg Center of Energy and Resources (RCER)}, doi = {10.35096/othr/pub-6542}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-65422}, abstract = {{\"U}ber uns Das Regensburg Center of Energy and Resources (RCER) b{\"u}ndelt seit 2012 die Aktivit{\"a}ten der Ostbayerischen Technischen Hochschule Regensburg (OTH Regensburg) und der regionalen Wirtschaftsunternehmen auf dem Strategiefeld „Energie und Ressourcen". Mission: Energieforschung: vernetzen, voranbringen, vermitteln Das RCER f{\"o}rdert die Vernetzung verschiedener Disziplinen der Energieforschung innerhalb der OTH Regensburg und mit externen Partnern (Firmen, F{\"o}rdertr{\"a}gern, Forschungsinstitutionen, {\"o}ffentlichen Einrichtungen). Das RCER ist Ihr Partner beim Voranbringen von Kooperationen und Forschungsvorhaben durch Unterst{\"u}tzung in der Antragsphase, bei der Einwerbung von Projektmitteln und Projektbegleitung im Energiebereich. Das RCER steht f{\"u}r die Vermittlung von Know-how, Basiswissen, aktuellen Fragen und den Technologietransfer rund um das Thema Energie zwischen Wissenschaft, Wirtschaft, Gesellschaft und Politik. Vision Wir sind Ihr erster Ansprechpartner und Motor f{\"u}r innovative Energieforschung. Werte Verl{\"a}sslichkeit, Kompetenz, Verantwortungsbewusstsein.Regional verwurzelt und weltoffen}, language = {de} } @article{WeberHaugDotter, author = {Weber, Karsten and Haug, Sonja and Dotter, Caroline}, title = {Forschung: Speichern, freigeben, weiterleiten, ...? - Gesundheitdatennutzung: Was wollen die Menschen?}, series = {Health \& care management}, volume = {14}, journal = {Health \& care management}, number = {6}, publisher = {Holzmann Medien}, address = {Bad W{\"o}rishofen}, issn = {2191-2432}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-66847}, pages = {72 -- 75}, abstract = {In Deutschland werden 402 medizinische Register gef{\"u}hrt, darunter ein Herzklappenregister und ein In-vitro-Fertilisationsregister. Doch nicht alle medizinischen Daten, f{\"u}r die der Bedarf eines Registers identifiziert wurde, sind tats{\"a}chlich verf{\"u}gbar. So wird z.B. seit l{\"a}ngerem ein nationales Mortalit{\"a}tsregister gefordert und im Unterschied zu anderen europ{\"a}ischen L{\"a}ndern existiert in Deutschland kein Impfregister. Dabei sind Gesundheitsdaten unerl{\"a}sslich f{\"u}r medizinische Forschung, Versorgungsforschung oder Epidemiologie; deren Verf{\"u}gbarkeit kann zur bedarfsgerechten Gesundheitsversorgung beitragen. Ein Element, um die aktuelle Situation zu verbessern, stellt die Nutzung von Daten der (einrichtungs{\"u}bergreifenden) elektronischen Patientenakte (ePA) in Forschungsdatenzentren dar, ein anderes die Nutzbarkeit medizinischer Register. Um belastbare Aussagen {\"u}ber die Bereitschaft der bundesdeutschen Bev{\"o}lkerung treffen zu k{\"o}nnen, ob und welche Gesundheitsdaten f{\"u}r Forschungszwecke in Registern freigegeben w{\"u}rden, wurde im Zeitraum vom 01.06. bis zum 27.06.2022 eine computergest{\"u}tzte Telefonbefragung (Dual-Frame) bei einer Zufallsstichprobe der deutschen erwachsenen Gesamtbev{\"o}lkerung durchgef{\"u}hrt (n=1.308). Der Fragebogen bestand aus 46 standardisierten Fragen. Die Telefonbefragung stellt einen Bev{\"o}lkerungsquerschnitt dar; im Gegensatz zu Online-Befragungen erm{\"o}glicht dies, auch Personen mit geringer Internetaffinit{\"a}t einzubeziehen.}, language = {de} } @misc{OPUS4-6648, title = {BABS-Mi}, volume = {4}, number = {1}, editor = {Ortner, Martina}, publisher = {Ostbayerische Technische Hochschule Regensburg}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, doi = {10.35096/othr/pub-6648}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-66480}, pages = {82}, abstract = {Pers{\"o}nliche Begegnungen ber{\"u}hren, ein gemeinsamer Augenblick entsteht. Direkte Gespr{\"a}che erm{\"o}glichen Perspektivenwechsel. Die einen m{\"o}chten verstehen, die anderen verstanden werden. Dies setzt eine Zuwendung im Sinne einer Zugewandtheit und des zuh{\"o}ren Wollens von den Beteiligten voraus. Interesse am Anderen haben, im Augenblick pr{\"a}sent sein, den anderen Menschen sehen. Das {\"u}ber diesen Austausch Erfahrene bleibt im Ged{\"a}chtnis. Studierende des berufsbegleitenden Studiengangs Soziale Arbeit haben ein Jahr lang an einem Lehrforschungsprojekt gearbeitet. Sie f{\"u}hrten Interviews und lernten dar{\"u}ber Menschen kennen, denen sie sonst vielleicht nie begegnet w{\"a}ren. Sie werteten diese Gespr{\"a}che aus, recherchierten, diskutierten, erk{\"a}mpften sich Erkenntnisse, verwarfen wieder welche und setzten neu an. Den empirischen Befund {\"u}bersetzten sie in Fachartikel. Daf{\"u}r wurden Sie von Mentor*innen begleitet. Die Ergebnisse k{\"o}nnen Sie in dieser Ausgabe lesen.}, subject = {Migration}, language = {de} } @article{GrabingerHauserMottok, author = {Grabinger, Lisa and Hauser, Florian and Mottok, J{\"u}rgen}, title = {On the perception of graph layouts}, series = {Journal of Software: Evolution and Process}, journal = {Journal of Software: Evolution and Process}, publisher = {Wiley}, doi = {10.1002/smr.2599}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-62973}, abstract = {In the field of software engineering, graph-based models are used for a variety of applications. Usually, the layout of those graphs is determined at the discretion of the user. This article empirically investigates whether different layouts affect the comprehensibility or popularity of a graph and whether one can predict the perception of certain aspects in the graph using basic graphical laws from psychology (i.e., Gestalt principles). Data on three distinct layouts of one causal graph is collected from 29 subjects using eye tracking and a print questionnaire. The evaluation of the collected data suggests that the layout of a graph does matter and that the Gestalt principles are a valuable tool for assessing partial aspects of a layout.}, language = {en} } @article{RillSchaefferSchuderer, author = {Rill, Georg and Schaeffer, Thomas and Schuderer, Matthias}, title = {LuGre or not LuGre}, series = {Multibody System Dynamics}, journal = {Multibody System Dynamics}, publisher = {Springer}, doi = {10.1007/s11044-023-09909-5}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-65653}, pages = {28}, abstract = {The LuGre model is widely used in the analysis and control of systems with friction. Recently, it has even been made available in the commercial multibody dynamics simulation software system Adams. However, the LuGre model exhibits well-known drawbacks like too low and force rate-dependent break-away forces, drift problems during sticking periods, and significant differences in non-stationary situations between the pre-defined friction law and the one produced by the LuGre model. In the present literature, these problems are supposed to come from the model dynamics or its nonlinear nature. However, most of these drawbacks are not simple side effects of a dynamic friction model but are caused in the LuGre approach, as shown here, by a too simple and inconsistent model of the bristle dynamics. Standard examples and a more practical application demonstrate that the LuGre model is not a "what you see is what you get" approach. A dynamic friction model with accurate bristle dynamics and consistent friction force is set up here. It provides insight into the physical basis of the LuGre model dynamics. However, it results in a nonlinear and implicit differential equation, whose solution will not be easy because of the ambiguity of the friction characteristics. The standard workaround, a static model based on simple regularized characteristics, produces reliable and generally satisfactory results but definitely cannot maintain a stick. The paper presents a second-order dynamic friction model, which may serve as an alternative. It can maintain a stick and produces realistic and reliable results.}, language = {en} } @article{BartschBurgerGradetal., author = {Bartsch, Alexander and Burger, Moritz and Grad, Marius and Esper, Lukas and Schultheiß, Ulrich and Noster, Ulf and Schratzenstaller, Thomas}, title = {Enhancement of laser cut edge quality of ultra-thin titanium grade 2 sheets by applying an in-process approach using modulated Yb:YAG continuous wave fiber laser}, series = {Discover Mechanical Engineering}, journal = {Discover Mechanical Engineering}, number = {10}, publisher = {Springer}, doi = {10.1007/s44245-023-00018-3}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-65647}, pages = {9}, abstract = {Titanium is used in many areas due to its excellent mechanical, biological and corrosion-resistant properties. Implants often have thin and filigree structures, providing an ideal application for fine cutting with laser. In the literature, the main focus is primarily on investigating and optimizing the parameters for titanium sheets with thicknesses greater than 1 mm. Hence, in this study, the basic manufacturing parameters of laser power, cutting speed and laser pulse of a 200 W modulated fiber laser are investigated for 0.15 mm thick grade 2 titanium sheets. A reproducible, continuous cut could be achieved using 90 W laser-power and 2 mm/s cutting-speed. Pulse pause variations between 85 and 335 μs in 50 μs steps and a fixed pulse width of 50 μs show that a minimum kerf width of 23.4 μm, as well as a minimum cut edge roughness Rz of 3.59 μm, is achieved at the lowest pulse pause duration. An increase in roughness towards the laser exit side, independent of the laser pulse pause duration, was found and discussed. The results provide initial process parameters for cutting thin titanium sheets and thus provide the basis for further investigations, such as the influence of cutting gas pressure and composition on the cut edge.}, language = {en} } @article{KaessStrahringerWestner, author = {K{\"a}ss, Sebastian and Strahringer, Susanne and Westner, Markus}, title = {A Multiple Mini Case Study on the Adoption of Low Code Development Platforms in Work Systems}, series = {IEEE Access}, journal = {IEEE Access}, publisher = {IEEE}, issn = {2169-3536}, doi = {10.1109/ACCESS.2023.3325092}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-65634}, pages = {118762 -- 118786}, abstract = {Although adopting Low Code Development Platforms (LCDPs) promises significant efficiency and effectiveness improvements for application development, its adoption still needs further empirical research. This paper uses a combinatorial approach to research LCDP adoption and presents the results of a multiple mini case study with 36 cases on LCDP adoption. A combination of the Socio-Technical Systems theory and the Technology-Organisational-Environment model is used as a theoretical lens. In this paper, we show that LCDP adoption is a multifaceted phenomenon and identify three archetypes for LCDP adoption (i.e., IT Resource Shortage Mitigators, Application Development Democratisers, and Synergy Realisers) and one archetype for LCDP non-adoption (i.e., Intricacy Adversaries). Each archetype can be interpreted as an individual path towards LCDP (non-)adoption. Based on these archetypes, we derive seven starting points for practitioners to adopt LCDPs in work systems. Moreover, by using the theoretical lenses, the paper shows that for an LCDP adoption to occur, an optimisation of the social and technical sub-systems is required.}, language = {en} } @misc{Hoeng, type = {Master Thesis}, author = {H{\"o}ng, Simon}, title = {Entwicklung eines digitalen Werkzeugs zur automatisierten Remodellierung von Bauwerken auf Grundlage von Bestandspl{\"a}nen: Erzeugung von synthetischen Daten f{\"u}r KI-L{\"o}sungen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-65218}, school = {Ostbayerische Technische Hochschule Regensburg}, pages = {93}, abstract = {In Anbetracht der hohen Zahl an zu ert{\"u}chtigenden Bauwerken in Deutschland bei gleichzeitig zunehmendem Fachkr{\"a}ftemangel in der Baubranche ist es wichtig, effiziente Planungs- und Bauprozesse zu schaffen. Digitale und automatisierte Arbeitsmethoden auf Basis von digitalen Bauwerksmodellen beginnen sich daher zu etablieren. F{\"u}r viele Bestandsbauwerke werden diese Methoden aber nur z{\"o}gerlich angewendet, da das als Grundlage ben{\"o}tigte digitale Bauwerksmodell erst aufwendig erstellt werden m{\"u}sste. Moderne Techniken der k{\"u}nstlichen Intelligenz (KI) wie Machine- oder Deep Learning bewegen im Moment viele Forschungs- und Wirtschaftsbereiche. Ihr Einsatz kann auch in der Bauwirtschaft L{\"o}sungen f{\"u}r komplexe oder repetitive Aufgaben bieten. In dieser Arbeit wird ein Tool konzipiert und evaluiert, welches in der Lage ist, mithilfe von KI-Techniken aus Bestandspl{\"a}nen dreidimensionale (3D) Bauwerksmodelle zu rekonstruieren. Bei der Konzeptionierung hat sich eine der großen Herausforderung beim Einsatz von Machine Learning herauskristallisiert. Um KI-Systeme {\"u}berwacht trainieren zu k{\"o}nnen, werden sog. gelabelte Trainingsdaten ben{\"o}tigt. In diesem konkreten Fall Positionspl{\"a}ne, bei denen in einer maschinenlesbaren Form hinterlegt ist, welche Art von Bauteilen an welcher Stelle des Planes dargestellt sind. Damit kann eine KI lernen, selbstst{\"a}ndig unbekannte Pl{\"a}ne zu analysieren und darin Bauteile zu klassifizieren. Diese Daten k{\"o}nnen entweder unter großem Aufwand manuell erstellt werden oder man greift auf synthetische Daten zur{\"u}ck. Synthetische Daten sind k{\"u}nstlich erschaffene Daten, die von ihrer Struktur und ihren Eigenschaften her echte Daten imitieren. Da dabei der Erzeugungsprozess gesteuert wird, lassen sich die ben{\"o}tigten Labels gleichzeitig miterzeugen. Auf diese Weise entsteht sog. Ground Truth Data, also Daten, bei denen man sich sicher sein kann, dass sie korrekt gelabelt sind. F{\"u}r diese Arbeit wurde eine Datenpipeline umgesetzt, die in der Lage ist, synthetische Daten speziell f{\"u}r die Zwecke der Baubranche zu generieren. Mithilfe des Applications Programming Interface von Autodesk Revit wurde eine C\#-Anwendung programmiert, die zufallsgesteuert Modelle erzeugt und anhand dieser Modelle realistische Pl{\"a}ne ableitet. Parallel dazu werden mithilfe der im Modell hinterlegten Bauteilinformationen die f{\"u}r die KI ben{\"o}tigten gelabelten Daten erzeugt. Erste Testl{\"a}ufe mit dem Objekterkennungsframework YOLOv5 waren vielversprechend. Der gew{\"a}hlte Ansatz hat sich somit als flexibel und skalierbar erwiesen, um damit KI-Systeme f{\"u}r bauspezifische Aufgaben - wie die Bauteilerkennung auf Pl{\"a}nen - zu trainieren.}, language = {de} } @article{AuerKubowitschDendorfer, author = {Auer, Simon and Kubowitsch, Simone and Dendorfer, Sebastian}, title = {Kombinierter Einfluss von psychologischen und biomechanischen Faktoren auf die muskul{\"a}ren Belastungen beim Fußballspielen}, series = {Die Orthop{\"a}die}, volume = {52}, journal = {Die Orthop{\"a}die}, number = {11}, publisher = {Springer}, doi = {10.1007/s00132-023-04437-8}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-65113}, pages = {1 -- 6}, abstract = {When mental stress and musculoskeletal loading interact, the risk for injury increases due to altered body kinematics and increased muscle tension. These changes can be detected with musculoskeletal models, and mental loading and stress must be analyzed at emotional, cognitive, and behavioral levels. To investigate these kinematic and loading changes under stress, competitive athletes were subjected to mental stress during highly dynamic movements, and musculoskeletal models were used to analyze the biomechanical loading. It was shown that under mental stress, independent of the subjective perception, a strong change in muscle forces can occur. Accordingly, competitive athletes should undergo screenings to assess individual movement patterns and promote general stress resilience.}, language = {de} } @article{Richter, author = {Richter, Stefanie}, title = {Erleben von Zukunftsunsicherheit, Armutsrisiken und prek{\"a}ren Lebenslagen im Pflegeheim}, series = {Zeitschrift f{\"u}r Gerontologie und Geriatrie}, journal = {Zeitschrift f{\"u}r Gerontologie und Geriatrie}, edition = {Online first}, publisher = {Springer}, doi = {10.1007/s00391-023-02231-x}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-64350}, pages = {1 -- 6}, abstract = {Die Situation von Menschen im Pflegeheim, die besonders dem Risiko der „pflegebedingten Verarmung" ausgesetzt sind, ist in der Forschung wenig pr{\"a}sent. Der Beitrag befasst sich mit dem Erleben von Unsicherheiten, Armut und prek{\"a}ren Lebenslagen {\"a}lterer Menschen im Heim. Grundlage liefern Daten einer ethnographischen Studie zum {\"A}lterwerden und zum Leben mit chronischen Erkrankungen. Anhand von F{\"a}llen wird ein Spektrum prek{\"a}rer Lebenslagen skizziert. Deutlich wird u. a.: Menschen mit diversen soziobiografischen Hintergr{\"u}nden k{\"o}nnen im Zuge von Hilfebed{\"u}rftigkeit und Heim{\"u}berg{\"a}ngen von Unsicherheiten, Armut und prek{\"a}ren Lebenslagen betroffen sein. Nicht zu wissen, ob das verf{\"u}gbare Geld gen{\"u}gt, um Kostensteigerungen bis zum Lebensende zu decken, kennzeichnet eine h{\"a}ufig erlebte Zukunftsunsicherheit; drohende Armut bzw. die Abh{\"a}ngigkeit von Sozialhilfe k{\"o}nnen pflege- und institutionell bedingte Verlusterfahrungen von Autonomie, Teilhabe und Lebensgestaltung versch{\"a}rfen und den Gesamtzustand weiter destabilisieren. Das Erleiden bleibt weitgehend unsichtbar; strukturelle Probleme werden individualisiert.}, language = {de} } @article{KurfessCorstenNickeletal., author = {Kurfess, Christina and Corsten, Sabine and Nickel, Maren and Knieriemen, Marie and Kreiter, Daniel and Lauer, Norina}, title = {Peer-to-peer support: digital networking in aphasia to improve quality of life (PeerPAL)}, series = {Frontiers in Communication}, volume = {8}, journal = {Frontiers in Communication}, publisher = {Frontiers Media S.A.}, doi = {10.3389/fcomm.2023.1187233}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-64881}, abstract = {Background: People with aphasia (PWA) often suffer from reduced participation and quality of life. Nevertheless, there are currently only a few specific interventions that respond to this problem. Participation and quality of life could be increased by interacting with peers who have similar experiences. Digital social networks could stimulate an autonomous interaction. However, digital social networks need to be adapted to the specific needs of PWA. Therefore, a participatory, agile process involving the target group should be chosen to develop such a olution, i.e., an app. The research project consists of a total of three phases. In the first phase—app development—the app was developed and programmed including the target group. In the second phase—app testing—the usability and user-friendliness of the app were evaluated with four PWA. In the third phase—feasibility and preliminary effcacy—that will be described in the article, the impact of the app on PWA will be evaluated. Aims: The overarching aim of our study is to provide preliminary effcacy of the intervention. Digital social interaction with other PWA can lead to increased social integration. In addition to digital interaction, personal encounters between PWA should be encouraged. As a result, we expect an improvement in quality of life of PWA. Additionally, we focus on identification of the most appropriate measurements to discover changes associated with the intervention. Methods: The evaluation, which is described in this paper, takes place in a pre-test - post-test design with a total of n = 48 PWA. Participants will be recruited in regional clusters to facilitate face-to-face meetings. Half of the participants will be assigned to the delayed intervention group and the other half to the immediate intervention group. Participants in the delayed intervention group will go through a 3-month waiting period before using the app, while the participants of the immediate intervention group will start using the app for 3 months right away. Inclusion criteria are the presence of chronic aphasia (at least 6 months) and possession of a smartphone with internet access. Questionnaires on quality of life (SAQOL-39, GHQ-12), depression (GDS, DISCs), communicative participation (CPIB), and social support (F-SozU) will be conducted at inclusion (t0), after 3 months of app use (t1), and after another 3 months for follow-up (t2). Participants in the delayed intervention group will be assessed twice before the intervention, before the 3-month waiting period (t0a) and after the waiting period (t0b). In addition to the quantitative measures, interviews will take place with 6 to 8 selected participants after 3 months of app use. Responses will be analysed using Thematic Analysis. Discussion: The app will be the first social network tool that is systematically developed with PWA. Initial indications from the first phases are that the app can be used by PWA, so that the evaluation of this app version can take place in the third phase. Results of this study can provide an initial indication of whether social network support is a suitable intervention. Findings will help provide information on the feasibility of digital connectivity for PWA. Preliminary findings on its impact on the participation and quality of life of PWA could be made available.}, subject = {Aphasie}, language = {en} } @misc{LehrerStockerDuddecketal., author = {Lehrer, Tobias and Stocker, Philipp and Duddeck, Fabian and Wagner, Marcus}, title = {Comparison of Low- vs. High-Dimensional Machine Learning Approaches for Sheet Metal Drawability Assessment}, series = {Third International Conference on Computational Science and AI in Industry (CSAI 2023), Trondheim, Norway, 28-30 August 2023}, journal = {Third International Conference on Computational Science and AI in Industry (CSAI 2023), Trondheim, Norway, 28-30 August 2023}, publisher = {International Centre for Numerical Methods in Engineering}, doi = {10.35096/othr/pub-6477}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-64772}, abstract = {Developing new deep-drawn sheet metal parts is a challenging task due to conflicting demands for low costs, durability, and crash properties. Ensuring manufacturability throughout geometrical changes adds to the complexity, leading engineers to rely on experience-driven iterative design changes that compromise requirements and lack reproducibility. Finite Element (FE) simulation models are employed to ensure manufacturability, albeit at the expense of high computational costs and delays in part development. To improve efficiency, a Machine learning (ML)-centered approach was proposed to ensure manufacturability. However, the limited availability of data raises uncertainty about whether a low- or high-dimensional ML approach is most suitable for drawability assessment. This work compares the accuracy of a low-dimensional, feature-based Linear Support Vector surrogate and an adapted high-dimensional PointNet model under different dataset sizes. The dataset is composed of parametrically generated, U-shaped structural sheet metal parts. We use a one-step simulation scheme and evaluate results with a Forming Limit Diagram (FLD) to label drawability. Results show the point of transition to be at about 500 training samples, from which onwards Deep learning is advantageous. Moreover, the generalizability of these models is tested on a second dataset with topologically similar components. This is to assess the potential for a geometrically more comprehensive evaluation. We discuss several influences on model performances and outline future potentials.}, language = {en} } @article{ScharfHaugRitthaleretal., author = {Scharf, Anna and Haug, Sonja and Ritthaler, Markus and Raptis, Georgios}, title = {Chancen und Herausforderungen der Digitalisierung bei der Rehabilitation - Ergebnisse einer Befragung von Rehabilitationseinrichtungen}, series = {Die Rehabilitation: Zeitschrift f{\"u}r Praxis und Forschung in der Rehabilitation}, volume = {62}, journal = {Die Rehabilitation: Zeitschrift f{\"u}r Praxis und Forschung in der Rehabilitation}, number = {5}, publisher = {Thieme}, address = {Stuttgart}, doi = {10.1055/a-2123-1566}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-64726}, pages = {299 -- 307}, abstract = {Ziel der Studie: Ziel der Studie ist die Messung des Stands der Digitalisierung und die mit einer Anbindung an die Telematikinfrastruktur verbundenen Chancen und Herausforderungen f{\"u}r Rehabilitationseinrichtungen. Methodik: Teilstandardisierte Online-Befragung bei Tr{\"a}gern von Rehabilitationseinrichtungen in Bayern (n=33). Der Fragebogen mit 36 Fragen beinhaltet eine leicht ver{\"a}nderte Skala auf Basis des „Electronic Medical Record Adoption Model (EMRAM)". Ergebnisse: Der Digitalisierungsgrad wurde in 70 Prozent der Rehabilitationseinrichtungen mit Stufe 0 angegeben (Stufenmodell bis 7). Die {\"U}bermittlung patientenbezogener Daten (Eingang und Ausgang) erfolgt h{\"a}ufig analog, wohingegen die Verarbeitung innerhalb der Einrichtung in vielen F{\"a}llen bereits {\"u}berwiegend digital ist. Beim Anschluss an die Telematikinfrastruktur wird hoher Aufwand bei der Installation, aber auch der Schulung des Personals und der Anpassung der Arbeitsorganisation gesehen. Schlussfolgerung: Durch {\"A}nderung der gesetzlich-finanziellen Lage in Deutschland er{\"o}ffnen sich f{\"u}r Rehabilitationseinrichtungen neue M{\"o}glichkeiten einer verst{\"a}rkten Digitalisierung. H{\"u}rden h{\"a}ngen mit Anforderungen an IT-Sicherheit, Schulung des Personals und sowie dem ebenfalls geringen Digitalisierungsstand bei Krankenh{\"a}usern und {\"A}rzt*innen sowie Patient*innen zusammen, die eine digitale Daten{\"u}bermittlung erschweren.}, language = {de} } @article{LehrerKapsLepeniesetal., author = {Lehrer, Tobias and Kaps, Arne and Lepenies, Ingolf and Duddeck, Fabian and Wagner, Marcus}, title = {2S-ML: A simulation-based classification and regression approach for drawability assessment in deep drawing}, series = {International Journal of Material Forming}, volume = {16}, journal = {International Journal of Material Forming}, publisher = {Springer}, doi = {10.1007/s12289-023-01770-3}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-64664}, pages = {1 -- 17}, abstract = {New structural sheet metal parts are developed in an iterative, time-consuming manner. To improve the reproducibility and speed up the iterative drawability assessment, we propose a novel low-dimensional multi-fidelity inspired machine learning architecture. The approach utilizes the results of low-fidelity and high-fidelity finite element deep drawing simulation schemes. It hereby relies not only on parameters, but also on additional features to improve the generalization ability and applicability of the drawability assessment compared to classical approaches. Using the machine learning approach on a generated data set for a wide range of different cross-die drawing configurations, a classifier is trained to distinguish between drawable and non-drawable setups. Furthermore, two regression models, one for drawable and one for non-drawable designs are developed that rank designs by drawability. At instantaneous evaluation time, classification scores of high accuracy as well as regression scores of high quality for both regressors are achieved. The presented models can substitute low-fidelity finite element models due to their low evaluation times while at the same time, their predictive quality is close to high-fidelity models. This approach may enable fast and efficient assessments of designs in early development phases at the accuracy of a later design phase in the future.}, language = {en} } @article{DotterHaugWeberetal., author = {Dotter, Caroline and Haug, Sonja and Weber, Karsten and Schnell, Rainer and Scharf, Anna and Altenburcher, Amelie}, title = {Analyzing factors determining vaccination willingness against COVID-19 in Germany 2020}, series = {Vaccine: X}, volume = {14}, journal = {Vaccine: X}, publisher = {Elsevier}, doi = {10.1016/j.jvacx.2023.100342}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-62900}, pages = {6}, abstract = {The study is based on a German single-topic population survey on vaccination willingness against COVID-19 (VWC) by the authors (2020, n = 2014). The single-topic survey allowed us to test several competing explanations for VWC, as discussed in the literature. The VWC in the sample was 67.3\%. Logistic regression was used to identify factors affecting VWC. Being at high risk from COVID-19 and having received flu vaccination have a positive impact on VWC. Perceived VWC of friends has a strong positive effect on respondents' VWC. Bivariate relationships of gender, age, and level of education with VWC were no longer significant in a multivariate analysis. Trust in alternative medicine and belief in conspiracy theories have a negative effect on VWC.}, language = {en} } @misc{Marterer, type = {Master Thesis}, author = {Marterer, Verena}, title = {A Characterisation of Motives and Barriers to Taking up Academic Study in the Field of Electrical Engineering}, address = {Regensburg}, doi = {10.35096/othr/pub-6255}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-62550}, school = {Ostbayerische Technische Hochschule Regensburg}, pages = {159}, abstract = {The problem description comes to the fore when the wide-ranging subject area of electrical engineering is combined and analyzed with different types of schools. It is becoming increasingly rare for elementary school children to come to grips with technology in the sense of recognizing functional interrelationships and understanding modes of action in the context of technical-practical confrontation. The picture at secondary schools is also rather sobering. Here, a strong focus on facts and knowledge and too little emphasis on modeling, application and problem solving lead to insufficient results in the cognitive area. In addition, a massive shortage of engineers and specialists with a technical and scientific orientation has been predicted for years and is being increasingly observed. The motivation of students in traditional lectures is decreasing and in general there is a decline of university students in technical subjects. These problems are not only known throughout Germany, but also internationally. Especially in developing countries, additional problems make technical education more difficult, regardless of the type of school. Therefore, this master thesis is evaluated in South Africa in order to consider as many influencing factors as possible. "Learning is experience. Everything else is simply information." - Methods and concepts developed in the thesis build upon this quote of Albert Einstein. Teaching methods are elaborated and applied for three different age groups and school types, depending on known influencing factors. The aim of this thesis is not to produce further findings in the sense of basic research, but to show ways in which the current situation can be steered in a different direction. It has been shown that technology lessons in elementary/secondary schools inspire interest in technical professions in the field of electrical engineering. Furthermore, the combination of frontal teaching, for a necessary theoretical background, together with student-active, action-oriented teaching shows advantages in terms of learning efficiency and an increase in performance levels for all three age groups. However, it could also be observed that factors such as social background, family influence and gender have partial effects on the promotion and education in the field of electrical engineering.}, language = {en} } @article{Goertler, author = {G{\"o}rtler, Michael}, title = {Bildung und Zeit im Kontext der Sozialen Arbeit : Theoretische {\"U}berlegungen zur Bedeutung von Zeit f{\"u}r Bildungsprozesse im Kontext der Sozialen Arbeit}, series = {Sozial Extra}, volume = {47}, journal = {Sozial Extra}, number = {1}, publisher = {Springer}, doi = {10.1007/s12054-023-00570-y}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-60988}, pages = {46 -- 49}, abstract = {Die Bedeutung von Zeit f{\"u}r Bildungsprozesse im Kontext der Sozialen Arbeit ist bisher wenig erforscht. Um sich dieser Fragestellung anzun{\"a}hern, werden in diesem Beitrag theoretische {\"U}berlegungen im Anschluss an Diskurse zu Bildung und Zeit in der P{\"a}dagogik angestellt. Dabei wird Zeit als erm{\"o}glichender, {\"o}konomischer und politischer Faktor diskutiert, um die Perspektive der Sozialen Arbeit auf Bildungsprozesse zu erweitern.}, language = {de} } @article{KoeckStrieglKrausetal., author = {K{\"o}ck, Hannah and Striegl, Birgit and Kraus, Annalena and Zborilova, Magdalena and Christiansen, Silke H. and Sch{\"a}fer, Nicole and Gr{\"a}ssel, Susanne and Hornberger, Helga}, title = {In Vitro Analysis of Human Cartilage Infiltrated by Hydrogels and Hydrogel-Encapsulated Chondrocytes}, series = {Bioengineering}, volume = {10}, journal = {Bioengineering}, publisher = {MDPI}, doi = {10.3390/bioengineering10070767}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-61235}, pages = {1 -- 21}, abstract = {Osteoarthritis (OA) is a degenerative joint disease causing loss of articular cartilage and structural damage in all joint tissues. Given the limited regenerative capacity of articular cartilage, methods to support the native structural properties of articular cartilage are highly anticipated. The aim of this study was to infiltrate zwitterionic monomer solutions into human OA-cartilage explants to replace lost proteoglycans. The study included polymerization and deposition of methacryloyloxyethyl-phosphorylcholine- and a novel sulfobetaine-methacrylate-based monomer solution within ex vivo human OA-cartilage explants and the encapsulation of isolated chondrocytes within hydrogels and the corresponding effects on chondrocyte viability. The results demonstrated that zwitterionic cartilage-hydrogel networks are formed by infiltration. In general, cytotoxic effects of the monomer solutions were observed, as was a time-dependent infiltration behavior into the tissue accompanied by increasing cell death and penetration depth. The successful deposition of zwitterionic hydrogels within OA cartilage identifies the infiltration method as a potential future therapeutic option for the repair/replacement of OA-cartilage extracellular suprastructure. Due to the toxic effects of the monomer solutions, the focus should be on sealing the OA-cartilage surface, instead of complete infiltration. An alternative treatment option for focal cartilage defects could be the usage of monomer solutions, especially the novel generated sulfobetaine-methacrylate-based monomer solution, as bionic for cell-based 3D bioprintable hydrogels.}, language = {en} } @article{MikhaeilNowakPalombaetal., author = {Mikhaeil, Makram and Nowak, Sebastian and Palomba, Valeria and Frazzica, Andrea and Gaderer, Matthias and Dawoud, Belal}, title = {Experimental and analytical investigation of applying an asymmetric plate heat exchanger as an evaporator in a thermally driven adsorption appliance}, series = {Applied Thermal Engineering}, journal = {Applied Thermal Engineering}, number = {228}, publisher = {Elsevier}, doi = {10.1016/j.applthermaleng.2023.120525}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-61115}, abstract = {This communication presents an experimental and analytical study on the evaporation mechanism in a closed-structured asymmetric plate heat exchanger (PHE) employed as a stagnant water evaporator for the application in an adsorption heat transformation appliance. To this aim, an experimental unit is constructed, which comprises two identical PHEs, one acting as an vaporator/condenser and the second, as an adsorber/desorber. Two endoscopes are mounted inside the investigated evaporator to visualize the evaporation mechanism when performing adsorption-evaporation processes under different boundary conditions. It turned out that the evaporation mechanism is a partially covered, thin film evaporation. A heat transfer analysis is performed to evaluate the heat transfer coefficient of the thin film evaporation () inside the investigated evaporator, resulting in -values between 1330 and 160 [W∙m-2∙K-1] over the investigated adsorption-evaporation time. Correlating the obtained () to the film thickness and the wetted area results in -values between 0.34 and 0.78 [mm] and wetted to total area ratios of 0.78 to 0.16. Besides, an analytical model has been developed and introduced to correlate the overall evaporator heat transfer coefficient with the adsorption potential and the time rate of change of the water uptake.}, language = {en} } @misc{Grossmann, type = {Master Thesis}, author = {Großmann, Christoph}, title = {Extending SQL for Machine Learning}, address = {Regensburg}, doi = {10.35096/othr/pub-6059}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-60595}, school = {Ostbayerische Technische Hochschule Regensburg}, pages = {92}, abstract = {As machine learning becomes ever more popular, the question of how to enable it on ever more platforms becomes more important. This thesis explores the extension of SQL and extension databases for machine learning. For this purpose, a framework for extending the Exasol database for machine learning is created. This framework uses the existing support for scripting languages and the in-database file system of the Exasol database to integrate existing machine-learning libraries into SQL. Currently, only Scikit-Learn was integrated. The focuses of our framework are simplicity, usability, smooth integration in SQL, and expressive power, while runtime efficiency and speed are only secondary focuses. Further benefits of the framework are reduction of communication overhead, increased data security, simplification of data synchronization, and the usage of core database strengths. Compared to other in-database machine learning approaches, Apache MADlib and Oracle Machine Learning, our framework most likely has inferior speed and efficiency, while having the advantage of using well-integrated and tested libraries. This thesis also provides an overview of related work on extending SQL and databases for machine learning. Furthermore, future directions for our framework are discussed. The created framework is freely available at https://github.com/christoph-grossmann/Exasol_DB_ML_Framework.}, subject = {Maschinelles Lernen}, language = {en} } @book{Richter, author = {Richter, Stefanie}, title = {Essst{\"o}rung}, edition = {2., durchgesehene Aufl.}, address = {Regensburg}, isbn = {978-3-96256-101-7}, doi = {10.35096/othr/pub-6005}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-60052}, publisher = {Ostbayerische Technische Hochschule Regensburg}, pages = {492}, abstract = {Die Studie bietet anhand von erz{\"a}hlten Lebensgeschichten einen systematischen Einblick in die Erlebnis- und Erfahrungswelt von Menschen mit »Essst{\"o}rungen«. Sichtbar werden Entwicklungsb{\"o}gen von der Entstehung {\"u}ber die Verfestigung bis zu den verschiedenen Bew{\"a}ltigungsversuchen sowie Ressourcen und Kompetenzen der Protagonistinnen. Diese Perspektive erm{\"o}glicht ein Neuverstehen des Ph{\"a}nomens »Essst{\"o}rung«, das {\"u}ber die g{\"a}ngigen defizit{\"a}ren Konzeptionen hinausgeht und Konsequenzen f{\"u}r eine ressourcenorientierte Begleitung von Menschen mit »Essst{\"o}rungen« aufzeigt. Das Buch richtet sich gleichermaßen an Professionelle, Betroffene und Angeh{\"o}rige.}, subject = {Essst{\"o}rung}, language = {de} } @techreport{GeissLiedlThalhammeretal., author = {Geiss, Florian and Liedl, Lucia and Thalhammer, Florian and Mauderer, Johannes and Meier, Maximilian and Geitner, Florian and Bindl, Jakob and Belz, Reinhold}, title = {FMS-BERICHTE WINTERSEMESTER 2022/23}, editor = {Meier, Hans and Niemetz, Michael and Fuhrmann, Thomas and Reindl, Andrea}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg / Fakult{\"a}t Elektro- und Informationstechnik}, doi = {10.35096/othr/pub-6032}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-60324}, pages = {II, 42}, abstract = {Dieser Bericht entstand auf Initiative der Studierenden des Masterstudiengangs Elektro- und Informationstechnik (MEI)", die an der Pflichtlehrveranstaltung „Forschungsmethoden und Seminar (FMS)" im Wintersemester 2022/23 teilnahmen. Diese Lehrveranstaltung hat das Ziel, systematisch an das wissenschaftliche Arbeiten, speziell die Wissenschaftskommunikation, heranzuf{\"u}hren. Daher war geeignete Literatur zu einem individuellen Thema zu recherchieren, Ver{\"o}ffentlichungen auf ihre Relevanz hin zu beurteilen und letztendlich eine eigene Ausarbeitung basierend auf der Literaturrecherche zu erarbeiten und diese in einem Vortrag zu pr{\"a}sentieren. Parallel dazu erfolgte im Theorieteil die entsprechende Hinf{\"u}hrung zu den verschiedenen Elementen der Wissenschaftskommunikation: • Bedeutung der Wissenschaftskommunikation f{\"u}r die Arbeit der Ingenieure in Forschung und Entwicklung • Literaturrecherche, Suchmaschinen, Sichtung und Analyse vorhandener Publikationen, Bewertung der Qualit{\"a}t aufgefundener Fachliteratur, Auswahl geeigneter Materialien f{\"u}r die eigene Arbeit • Aufbereitung und Darstellung der recherchierten technischer Inhalte in Form einer seitenanzahlbegrenzten wissenschaftlichen Ausarbeitung • Einhalten formaler Randbedingungen bzgl. Strukturierung, einschl. Bildnachweise und Zitationsstile • Peer-review-Prozess bei wertsch{\"a}tzender Beurteilung der Leistung anderer • Publikumsangepasstes Aufbereiten komplexer fachlicher Inhalte mit hochschul{\"o}ffentlicher Pr{\"a}sentation der Ergebnisse • F{\"u}hren m{\"u}ndlicher wissenschaftlicher Diskurse Nachdem die Masterstudierenden in der Regel {\"u}ber noch keine eigene wissenschaftliche Forschungserfahrung bzw. -inhalte verf{\"u}gen, lag der w{\"a}hlbare Schwerpunkt der Literatursuche auf der Bearbeitung von vorgegeben aktuellen technischen oder gesellschaftspolitischen Forschungsthemen.}, subject = {Elektrotechnik}, language = {de} } @techreport{Brueckl, author = {Br{\"u}ckl, Oliver}, title = {Hemmnisse im Verteilnetzausbau und deren {\"U}berwindung}, publisher = {INA - Institut f{\"u}r Netz- und Anwendungstechnik GmbH}, address = {Waldm{\"u}nchen}, doi = {10.35096/othr/pub-6043}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-60438}, pages = {84}, abstract = {Die Bundesregierung hat ambitionierte Ausbaupfade f{\"u}r die Windenergie und Photovoltaik festgelegt. Allerdings gef{\"a}hrdet vor allem der Verteilnetzausbau und der Netzanschluss der Erneuerbare-Energien-Anlagen (EE-Anlagen) die Erreichung dieser hochgesteckten Ziele. In einem Gutachten im Auftrag der Fraktion von B{\"u}ndnis 90/DIE GR{\"U}NEN im Bayerischen Landtag identifiziert Prof. Dr.-Ing. Oliver Br{\"u}ckl die wesentlichen Hemmnisse f{\"u}r den beschleunigten Verteilnetzausbau und den Netzanschluss f{\"u}r EE-Anlagen und diskutiert L{\"o}sungsans{\"a}tze in folgenden Bereichen: Regulierungsrahmen f{\"u}r die Verteilnetzbetreiber, Genehmigungsverfahren von Netzausbauprojekten, Praxis der Netzintegration von EE-An lagen, Personalkapazit{\"a}ten, Beschaffung von Betriebsmitteln und Bau von Anlagen, Zertifizierungsprozess f{\"u}r den Netzanschluss von EE-Anlagen. Im Rahmen des Gutachtens wurden ca. 35 Interviews mit verschiedenen Stakeholdern gef{\"u}hrt: Netzbetreiber und Stadtwerke, Projektierer*innen, Herstellerindustrie, Verb{\"a}nde und Beh{\"o}rden.}, language = {de} } @techreport{HaugDotterBaumannetal., type = {Working Paper}, author = {Haug, Sonja and Dotter, Caroline and Baumann, Lukas and Weber, Karsten}, title = {EVEKT - Erh{\"o}hung der Verbraucherpartizipation an der Energiewende durch KI-Technologien und datenbasierte Mehrwertdienste. 1. Arbeitspapier: Determinanten des Stromverbrauchs von Privathaushalten im Kontext von Smart Meter}, organization = {Ostbayerische Technische Hochschule (OTH) Regensburg / Institut f{\"u}r Sozialforschung und Technikfolgenabsch{\"a}tzung (IST)}, doi = {10.13140/RG.2.2.11998.72009}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-60348}, pages = {17}, abstract = {Seit dem Beginn des russischen Angriffskriegs und der Ukraine-Krise im Februar 2022 wurden massive Preissteigerungen auf dem Energiesektor beobachtet. Die Unsicherheiten auf dem Energiemarkt sowie die angespannte Lage der Gasversorgung f{\"u}hrten zu erheblich h{\"o}heren Strompreisen f{\"u}r Privathaushalte. Welche Faktoren den Stromverbrauch determinieren, wird im vorliegenden Arbeitspapier genauer untersucht. Der Zusammenhang zwischen Haushaltsmerkmalen und deren Stromverbrauch ist in der sozialwissenschaftlichen Energieforschung bekannt. Eine M{\"o}glichkeit der Verbrauchserfassung von Strom sind Smart-Meter, digitale Stromz{\"a}hler. Projektziel von EVEKT ist die Untersuchung von M{\"o}glichkeiten zur Reduktion des Stromverbrauchs von privaten Haushalten. Ziel dieses Arbeitspapiers ist es, verschiedene Gruppen von Haushalten und deren Charakteristik bei Strombezug und Smart-Meter-Nutzung zu differenzieren. Damit dokumentiert es einen Arbeitsschritt im Rahmen eines EVEKT-Teilprojekts zur Untersuchung sozialer und ethischer Aspekte von KI-Technologie in Privathaushalten. Es wurde ein Scoping Review zu Stromverbrauchsindikatoren in Bezug auf Smart-Meter durchgef{\"u}hrt. In einer systematischen Suche in der Datenbank Web of Science wurden 477 Treffer gefunden. Von den 477 Treffern konnten nach Durchsicht 12 passende Studien analysiert werden. Die untersuchten Arbeiten unterteilen Haushalte in verschiedene Kategorien bzw. Cluster. Einige Studien gruppieren nach soziodemografischen Aspekten, w{\"a}hrend andere die Verbrauchsmuster analysieren. Als Ergebnis des Scoping Reviews empfehlen wir, beide Ans{\"a}tze zu kombinieren, um verschiedene Haushaltstypen angemessen anzusprechen. Bedeutung f{\"u}r die weiteren Projektschritte (Bev{\"o}lkerungsumfrage) Inwieweit die Zugeh{\"o}rigkeit zu bestimmten Haushaltstypen die Akzeptanz von KI-Technologie und feedback-basierter Apps determinieren, wird im Rahmen einer eigenen Befragung {\"u}berpr{\"u}ft werden. Dazu wird aktuell ein Fragebogen entwickelt. Die Feldphase der deutschlandweiten Bev{\"o}lkerungsbefragung ist f{\"u}r 2024 geplant.}, language = {de} } @techreport{VetterHaugBaumannetal., type = {Working Paper}, author = {Vetter, Miriam and Haug, Sonja and Baumann, Lukas and Dotter, Caroline and Weber, Karsten}, title = {EVEKT - Erh{\"o}hung der Verbraucherpartizipation an der Energiewende durch KI-Technologien und datenbasierte Mehrwertdienste. 2. Arbeitspapier: Identifikation von Motivatoren}, organization = {Ostbayerische Technische Hochschule (OTH) Regensburg / Institut f{\"u}r Sozialforschung und Technikfolgenabsch{\"a}tzung (IST)}, doi = {10.13140/RG.2.2.11159.85925}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-60357}, pages = {15}, abstract = {Viele L{\"a}nder setzen auf den Einbau digitaler Messtechnologien f{\"u}r Privathaushalte, die als zentraler Bestandteil von Smart-Grids, intelligenter Stromnetze installiert werden, um Stromnetzstabilit{\"a}t zu gew{\"a}hrleisten. Die Messung des Stromverbrauchs kann an die Verbraucher*innen mithilfe von Apps oder anderer Smart-Meter-Plattformen r{\"u}ckgemeldet werden. Dabei zeigt sich, dass nicht nur die Anzeige bzw. die Sichtbarmachung des Stromverbrauchs zu einer m{\"o}glichen Reduktion des Energieverbrauchs f{\"u}hrt, sondern dass die individuelle Ansprache von Haushalten und soziale, finanzielle sowie ideelle Anreize die Haushalte langfristig zur Energiereduktion bewegen. Der {\"U}berblick {\"u}ber Motivatoren im Zusammenhang mit einer Energieverbrauchsr{\"u}ckmeldung bietet Hinweise f{\"u}r eine geplante Bev{\"o}lkerungsbefragung sowie die Entwicklung einer Web-App im Rahmen des Projekts EVEKT.}, language = {de} } @techreport{VetterWeberHaugetal., type = {Working Paper}, author = {Vetter, Miriam and Weber, Karsten and Haug, Sonja and Dotter, Caroline}, title = {EVEKT - Erh{\"o}hung der Verbraucherpartizipation an der Energiewende durch KI-Technologien und datenbasierte Mehrwertdienste. 3. Arbeitspapier: Die Gefahr des Rebound-Effektes}, organization = {Ostbayerische Technische Hochschule (OTH) Regensburg / Institut f{\"u}r Sozialforschung und Technikfolgenabsch{\"a}tzung (IST)}, doi = {10.13140/RG.2.2.24581.63205}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-60382}, pages = {8}, abstract = {Politische Energieeffizienzprogramme und gesetzliche Vorgaben fordern einen Emissionsr{\"u}ckgang in Deutschland. Dieser soll auch durch die verst{\"a}rkte Digitalisierung des Energiesektors erreicht werden. H{\"a}ufig werden bei Einf{\"u}hrung effizienzsteigernder technischer Systeme Rebound-Effekte beobachtet, die Energieeinsparungen verringern. Worin Rebound-Effekte bestehen, wie sie entstehen und wie sie mit Entwicklungen der Stromnutzung in Privathaushalten zusammenh{\"a}ngen, wird in diesem Arbeitspapier behandelt.}, language = {de} } @article{GebhardtSchlampEhrlichetal., author = {Gebhardt, Jakob and Schlamp, Matthias and Ehrlich, Ingo and Hiermaier, Stefan}, title = {Low-velocity impact behavior of elliptic curved composite structures}, series = {International Journal of Impact Engineering}, volume = {180}, journal = {International Journal of Impact Engineering}, publisher = {Elsevier}, doi = {10.1016/j.ijimpeng.2023.104663}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-59304}, pages = {8}, abstract = {Although many composite structures are inconsistently curved, such as the leading edges of aircraft wings, the variety of research in impact engineering is almost limited to the impact performance of plates or cylindrically curved specimens. It is not known whether the findings obtained from standardized tests can be transferred to curved structures or which adaptions are required. Therefore, a deeper understanding of the deformation and damage behavior of inconsistently curved structures is essential to transfer the observed impact behavior of flat specimens to general curved structures and therefore to utilize the full lightweight potential of a load-specific design. An accurate description of the procedure as well as the results of the experimental and numerical study of the low-velocity impact behavior of differently single-curved elliptic specimens is presented. To close the research gap of the impact behavior of geometries with curvatures between the plates and simplified leading edges, novel specimens geometries have been derived from established impact test standards. Glassfiber-reinforced specimens are subjected to an instrumented impact test at constant impact energy. This is numerically investigated by a stacked-layer model, which used cohesive zone modeling to enable the simulation of matrix cracking, fiber fracture and delamination. The resulting projected damage areas, as well as the force and deflection histories, were evaluated and section cuts were examined to discuss the damage morphology, formation and propagation process. Significant effects on maximum deflection, compliance and dynamic behavior on the size and morphology of damage were found.}, language = {en} } @article{SchliermannRockSchrollDecker, author = {Schliermann, Rainer and Rock, Jasmin and Schroll-Decker, Irmgard}, title = {Erwerb von sozialer und emotionaler Kompetenz im Bachelorstudium der Sozialen Arbeit: Eine explorative Ann{\"a}herung}, series = {Zeitschrift f{\"u}r Bildungsforschung}, volume = {13}, journal = {Zeitschrift f{\"u}r Bildungsforschung}, number = {1}, publisher = {Springer Nature}, doi = {10.1007/s35834-023-00396-4}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-59260}, pages = {335 -- 350}, language = {de} } @article{KaessStrahringerWestner, author = {K{\"a}ss, Sebastian and Strahringer, Susanne and Westner, Markus}, title = {Practitioners' Perceptions on the Adoption of Low Code Development Platforms}, series = {IEEE Access}, journal = {IEEE Access}, publisher = {IEEE}, issn = {2169-3536}, doi = {10.1109/ACCESS.2023.3258539}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-59170}, pages = {30}, abstract = {Organizations are under increasing pressure to develop applications within budget and time at high quality. Therefore, multiple organizations adopt Low Code Development Platforms (LCDP) to develop applications faster and cheaper compared to traditional application development. However, current research on LCDP adoption lacks empirical grounding as well as a deeper understanding of the importance of adoption drivers and inhibitors. We conducted semi-structured interviews and a Delphi study with seventeen experts to address these gaps. As a result, we identified twelve drivers and nineteen inhibitors for adopting LCDPs. We show that the experts have a consensus on the most and the least important drivers and inhibitors for LCDP adoption. Yet, the ranking of the drivers and inhibitors between the most and least important is highly context dependent. For some drivers and inhibitors, the experts' ranking is similar to academic literature, whereas, for others, it differs. In conclusion, the study at hand empirically validates drivers and inhibitors for LCDP adoption, adds six new drivers and six new inhibitors to the body of knowledge, and analyses the importance of these factors.}, language = {en} } @article{RauchBrueckl, author = {Rauch, Johannes and Br{\"u}ckl, Oliver}, title = {Achieving Optimal Reactive Power Compensation in Distribution Grids by Using Industrial Compensation Systems}, series = {Electricity}, volume = {4}, journal = {Electricity}, number = {1}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/electricity4010006}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-59139}, pages = {78 -- 95}, abstract = {This paper presents a method for integrating industrial consumers owning compensation systems as alternative reactive power sources into grid operating processes. In remuneration, they receive a market-based provision of reactive power. The aim is to analyze the potential of reactive power compensation systems of industrial companies connected to medium-voltage (10 kV-30 kV) AC grids in order to increase the reactive power ability of distribution grids. Measurement methods and reactive power potential results of six industrial companies are presented to characterize the amount and temporal availability of their reactive power potential. The presented approach for using the decentralized reactive power potential is a centralized reactive power control method and is based on optimal power flow (OPF) calculations. An optimization algorithm based on linear programming is used to coordinate a reactive power retrieval tuned to the actual demand. The influencing quantities are the current grid status (voltage and load flow capacity reserves at grid nodes and power lines) and the current reactive power potential of the reactive power sources. The compensation impact of six measured industrial companies on an exemplary medium-voltage grid is shown by an application example.}, language = {en} } @techreport{AndratschkeCeulloDawoudetal., author = {Andratschke, Christin and Ceullo, Laura and Dawoud, Belal and Draeger, Susan and Gerdes, Thorsten and Giebisch, Matthias and Grießhammer, Peter and Haas, Katharina and Haug, Sonja and Helling, Dominik and Kominis, Lena and Lang, Christian and Malz, Sebastian and Melzl, Johannes and Michlbauer, David and M{\"u}hlberger, Thomas and Nagl, Klaus and Preis, Michael and Rechenauer, Christian and Riederer, Michael and R{\"u}ckerl, Alexander and Saller, Tobias and Schnabl, Andreas and Stadler, Michael and Steffens, Oliver and Steininger, Peter and Stelzl, Andr{\´e} and Toutouly, Lovis and Trauner, Matthias and Vetter, Miriam and Walbrunn, Johannes and Weber, Karsten and Zielbauer, Lukas}, title = {MAGGIE: Energetische Modernisierung des genossenschaftlichen Wohnquartiers Margaretenau in Regensburg}, editor = {Steffens, Oliver}, address = {Regensburg}, organization = {Ostbayerische Technische Hochschule Regensburg}, isbn = {978-3-96256-100-0}, doi = {10.35096/othr/pub-5901}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-59011}, pages = {XVIII, 462 S.}, abstract = {Im Projekt MAGGIE wurden f{\"u}r das genossenschaftliche historische Stadtquartier „Margaretenau" in Regensburg Musterl{\"o}sungen f{\"u}r energieoptimiertes Wohnen mit innovativen Wandaufbauten aus solaraktiven Baukonstruktionen und einer vorhersagebasierten Versorgungstechnologie erforscht. Dazu wurde ein bestehendes Wohngeb{\"a}ude als Demonstrations- und Versuchsobjekt mit einem neuartigen, besonders effizienten Hybridsystem aus W{\"a}rmepumpentechnologie und Kraft- W{\"a}rme-Kopplung ausgestattet und untersucht, erg{\"a}nzt durch eine dynamische W{\"a}rmelogistik zur Verringerung von Verteilungsverlusten. Das System wurde durch ein neu entwickeltes, allgemein einsetzbares Planungs-, Optimierungs- und Steuerungstool ausgelegt und im Betrieb geregelt. Die in Echtzeit laufende Nachoptimierung des Systems w{\"a}hrend des Betriebs greift dabei auf reale Monitoringdaten zu. Die Einbindung von Nutzerbedarfsprofilen, Stromb{\"o}rse und Wetterdaten in die Steuerung gestattet einen dynamischen und perspektivischen Anlagenbetrieb zur Maximierung der Solar- und Umweltw{\"a}rme-Anteile der Energieversorgung und leistet damit einen wirksamen Beitrag zu einem emissionsarmen, klimafreundlichen Geb{\"a}udebetrieb. F{\"u}r die denkmalgerechte Modernisierung der historischen Fassaden wurde ein solaraktives und solaradaptives Außenputzsystem entwickelt und in der Realit{\"a}t getestet. Am Bestandsgeb{\"a}ude kam anstelle eines W{\"a}rmed{\"a}mmverbundsystems ein innovativer D{\"a}mmputz mit Mikrohohlglaskugeln zum Einsatz. Die Skalierbarkeit erlaubt eine abschnittsweise Modernisierung des gesamten Ensembles {\"u}ber mehrere Jahre. Durch die hohe Energieeffizienz wird die Warmmiete f{\"u}r die Bewohner der genossenschaftlichen Siedlung durch die Modernisierungsmaßnahmen nicht erh{\"o}ht, so dass auch nach der Modernisierung ein bezahlbares Wohnen sichergestellt wird.}, subject = {Altbaumodernisierung}, language = {de} } @techreport{Steffens, type = {Working Paper}, author = {Steffens, Oliver}, title = {A Perpetual Calendar Slide Rule}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-58935}, abstract = {We present a method and demonstrate the construction of an analog (mechanical/graphical) perpetual calendar device for the Gregorian calendar system. It allows to calculate the weekdays of a day in any year (and vice versa).}, language = {en} } @techreport{Steffens, author = {Steffens, Oliver}, title = {Report on a Vernier (Nonius Rule) for Non-Linear Scales}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-58926}, pages = {7}, abstract = {The vernier or nonius (in other languages) goes back to a measuring tool used in navigation and astronomy named after its inventor Pedro Nunes (1502-1578; Latin: Petrus Nonius), a Portuguese mathematician and navigator. The nonius was created in 1542 to take finer measurements on circular instruments such as the astrolabe. In 1631 the French mathematician Pierre Vernier (1580-1637) adapted and simplified the system which was later denoted "vernier". We present a method to construct a vernier-like scale for logarithmic scales (as used for typical slide rules), which results in variable tick spacings. The idea is to put the non-linear scale on a spiral. The method can be applied to any non-linear scale, not only logarithmic scales.}, language = {en} } @article{GaertnerMarxSchubachGadereretal., author = {G{\"a}rtner, Sebastian and Marx-Schubach, Thomas and Gaderer, Matthias and Schmitz, Gerhard and Sterner, Michael}, title = {Techno-Economic Analysis of Carbon Dioxide Separation for an Innovative Energy Concept towards Low-Emission Glass Melting}, series = {energies}, volume = {16}, journal = {energies}, number = {5}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/en16052140}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-53627}, pages = {1 -- 25}, abstract = {The currently still high fossil energy demand is forcing the glass industry to search for innovative approaches for the reduction in CO2 emissions and the integration of renewable energy sources. In this paper, a novel power-to-methane concept is presented and discussed for this purpose. A special focus is on methods for the required CO2 capture from typical flue gases in the glass industry, which have hardly been explored to date. To close this research gap, process simulation models are developed to investigate post-combustion CO2 capture by absorption processes, followed by a techno-economic evaluation. Due to reduced flue gas volume, the designed CO2 capture plant is found to be much smaller (40 m3 absorber column volume) than absorption-based CO2 separation processes for power plants (12,560 m3 absorber column volume). As there are many options for waste heat utilization in the glass industry, the waste heat required for CO2 desorption can be generated in a particularly efficient and cost-effective way. The resulting CO2 separation costs range between 41 and 42 EUR/t CO2, depending on waste heat utilization for desorption. These costs are below the values of 50-65 EUR/t CO2 for comparable industrial applications. Despite these promising economic results, there are still some technical restrictions in terms of solvent degradation due to the high oxygen content in flue gas compositions. The results of this study point towards parametric studies for approaching these issues, such as the use of secondary and tertiary amines as solvents, or the optimization of operating conditions such as stripper pressure for further cost reductions potential.}, language = {en} } @inproceedings{GrabRauchGoetzetal., author = {Grab, Robin and Rauch, Johannes and G{\"o}tz, Rebekka and Br{\"u}ckl, Oliver and Eichner, Stefan and Engel, Bernd}, title = {Q-Dynamik: Blindleistungsstellgeschwindigkeiten im Verteilnetz}, series = {Zuk{\"u}nftige Stromnetze: 27.-28. Januar 2021, 03.-04. Februar 2021, Tagungsunterlagen}, booktitle = {Zuk{\"u}nftige Stromnetze: 27.-28. Januar 2021, 03.-04. Februar 2021, Tagungsunterlagen}, publisher = {Conexio-PSE GmbH}, address = {Pforzheim}, isbn = {978-3-948176-12-9}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-58762}, pages = {46 -- 55}, abstract = {Mit der Energiewende geht eine starke Dezentralisierung der Energieeinspeisung einher. So sind im Deutschland des Jahres 2020 rund 31.000 Windenergieanlagen (WEA) in Betrieb, w{\"a}hrend bei der Solarenergie vor kurzem die zweimillionste Photovoltaik-Anlage (PVA) installiert wurde. Fast alle diese dezentralen Energieressourcen (DER) sind nach den Einspeiserichtlinien der Vergangenheit und der Gegenwart in der Lage, Blindleistung bereitzustellen, um die Spannung im Netz zu regeln und zum Blindleistungsausgleich beizutragen. Weitere potentielle dezentrale Blindleistungsquellen wie Blockheizkraftwerke, Kompensationsanlagen und perspektivisch sogar Verbraucher und Speicher sind im Verteilnetz zu finden. Durch den stetigen R{\"u}ckbau konventioneller Großkraftwerke, welche dem {\"U}bertragungsnetz bisher als Blindleistungsquellen zur Verf{\"u}gung standen, bedarf es einer Untersuchung mit der Fragestellung, in welchem Maß die neue Erzeugungslandschaft auch in diesem Feld als Ersatz dienen kann. Ein m{\"o}gliches Hindernis f{\"u}r einen breitangelegten Einsatz von DER zu Zwecken des spannungsebenen{\"u}bergreifenden Blindleistungsmanagements ist mangelndes Wissen {\"u}ber die Regeldynamik dieser verteilten Blindleistungsquellen. {\"U}bertragungs- und Verteilnetzbetreiber, die DER aktiv f{\"u}r Blindleistungsausgleich oder statische Spannungsregelung einsetzen, geben in der Regel ihre Blindleistungsanforderungen in kleineren Stufen mit erheblichen Latenzzeiten zwischen zwei Schritten weiter. Bef{\"u}rchtet wird, dass schnellere Spr{\"u}nge in der Blindleistungsvorgabe zu instabilen Betriebszust{\"a}nden oder anderweitigen Fehlfunktionen im Netz f{\"u}hren k{\"o}nnen. Eine genauere Kenntnis der dynamischen F{\"a}higkeiten vorhandener Blindleistungsquellen sowie der Auswirkungen auf die Netzstabilit{\"a}t und den Netzschutz k{\"o}nnte dazu beitragen, die Geschwindigkeit der Blindleistungsbereitstellung zu optimieren und somit tempor{\"a}re Spannungsschwankungen und -verluste zu minimieren und die Spannungsstabilit{\"a}t insgesamt zu verbessern. Durch eine entsprechende Regelungs- und Einsatzstrategie kann ein optimales Zusammenspiel der verschiedenen Technologien zur Deckung der Blindleistungsbedarfe f{\"u}r unterschiedliche Zeitbereiche erzielt werden. Hierf{\"u}r ist eine genaue Kenntnis der Blindleistungsstellgeschwindigkeiten und des dynamischen Regelverhaltens erforderlich. Dieser Beitrag stellt dazu Ergebnisse aus dem Forschungsprojekt „Q-Integral" vor. Um die relevanten Zeitkonstanten der Blindleistungsbereitstellung vollst{\"a}ndig aufzuf{\"u}hren, werden zun{\"a}chst typische Kommunikationszeiten f{\"u}r die {\"U}bermittlung von Sollwerten diskutiert. Anschließend werden Untersuchungen zu theoretischen und praktischen Reaktionszeiten verschiedener Blindleistungsquellen vorgestellt. Daf{\"u}r werden verschiedene Technologien wie Umrichter f{\"u}r PVA, Batteriespeicher und WEA sowie Synchrongeneratoren, die bei thermischen Kraftwerken die dominierende Technologie sind, betrachtet. Abschließend werden diese Werte mit realen Blindleistungsstellgeschwindigkeiten von ausgedehnten Wind- und Solarkraftwerken verglichen.}, language = {de} } @inproceedings{SchweibererRauchBrueckl, author = {Schweiberer, Philipp and Rauch, Johannes and Br{\"u}ckl, Oliver}, title = {Entwicklung eines Regelkonzeptes f{\"u}r einen optimierten Blindleistungsabruf auf Basis von Blindleistungspotentialanalysen bei Industriebetrieben im Mittelspannungsnetz}, series = {Tagungsband Tagung Zuk{\"u}nftige Stromnetze 26./27. Januar 2022 (online)}, booktitle = {Tagungsband Tagung Zuk{\"u}nftige Stromnetze 26./27. Januar 2022 (online)}, publisher = {Conexio-PSE GmbH}, address = {Pforzheim}, isbn = {978-3-948176-16-7}, doi = {10.35096/othr/pub-5870}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-58704}, pages = {224 -- 233}, abstract = {Im Zuge der Energiewende ergibt sich ein Wandel in der Struktur des Elektrizit{\"a}tsversorgungsnetzes. Die Verschiebung der Erzeugungsleistung von konventionellen Großkraftwerken in h{\"o}heren Netzebenen hin zu dezentralen erneuerbaren Energieanlagen in niedrigeren Netzebenen resultiert sowohl in bidirektionalen Lastfl{\"u}ssen als auch in schwankenden Einspeisecharakteristiken. Des Weiteren folgen durch den Wegfall von Großkraftwerken als Blindleistungsquellen Leistungsdefizite in der {\"U}bertragungsnetzebene, die kompensiert werden m{\"u}ssen. Daraus resultieren Herausforderungen an einen sicheren und zuverl{\"a}ssigen Betrieb der Verteil- und {\"U}bertragungsnetze. Neue Konzepte m{\"u}ssen f{\"u}r die Erbringung von Blindleistung entwickelt werden, es soll mehr Blindleistung aus dem Verteilungsnetz zur Verf{\"u}gung gestellt werden, um die Systemstabilit{\"a}t zu wahren. Im Rahmen des Projektes Q-Integral wird das Thema „Blindleistung" (Q) ganzheitlich untersucht. Es werden dazu verschiedene Erbringungsoptionen f{\"u}r Blindleistung hinsichtlich technischer und wirtschaftlicher Potentiale untersucht, die in ein funktionales und effizientes Blindleistungsmanagement eingebracht werden. Die Untersuchungsans{\"a}tze daf{\"u}r sind sowohl spannungsebenen-{\"u}bergreifend als auch netzbetreiber-{\"u}bergreifend. Ein Ansatzpunkt des Projektes ist die Betrachtung der Blindleistungsbereitstellung von Industriebetrieben. Dazu wird das Potential von Betrieben, die an das Verteilnetz angeschlossen sind und Blindleistung durch Kompensations- oder Erzeugungsanlagen bereitstellen k{\"o}nnen, untersucht. Ziel ist es, das gesicherte und maximale induktive sowie kapazitive Potential zu bestimmen. Das gesicherte kapazitive Potential kann genutzt werden, um Aussagen dar{\"u}ber zu treffen, wie stark dem Spannungsfall im vorgelagerten Netz zu Starklastzeiten entgegengewirkt werden kann. Anhand des gesicherten induktiven Potentials kann ein Spannungsanstieg w{\"a}hrend Schwachlastzeiten ausgeglichen werden kann. In diesem Beitrag werden Ergebnisse aus dem Projekt Q-Integral vorgestellt. Dazu werden zuerst die Berechnungsgrundlagen der induktiven und kapazitiven Blindleistungspotentiale aufgezeigt und die Ergebnisse der Berechnungen vorgestellt. Die gewonnen Ergebnisse entstammen aus Messungen an einem Industriebetrieb mit Blindleistungskompensationsanlagen (BKA), den entsprechenden Reglern der Anlagen und einer installierten Kompensationsleistung von 1600 kvar. Sowohl die Lastg{\"a}nge als auch das Schaltverhalten der einzelnen Kompensationsanlagen liegen den Berechnungen zugrunde. Um den Austausch der Blindleistung an der {\"U}bergabestelle des Betriebs zum Mittelspannungsnetz netzdienlich einzustellen, bedarf es eines geeigneten Regelkonzepts, das neben den BKAs auch weitere Q-Quellen ber{\"u}cksichtigt. Deshalb wird abschließend ein Regelkonzept vorgestellt, das den technisch-optimierten Blindleistungsabruf unter Ber{\"u}cksichtigung mehrerer Blindleistungsquellen behandelt.}, language = {de} } @inproceedings{RauchBrueckl, author = {Rauch, Johannes and Br{\"u}ckl, Oliver}, title = {Analysis of the correlation behavior between local available information to the overall reactive power of a medium-voltage grid group}, series = {Applied Research Conference - ARC 2017, 7 July 2017 M{\"u}nchen}, booktitle = {Applied Research Conference - ARC 2017, 7 July 2017 M{\"u}nchen}, address = {M{\"u}nchen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-58712}, pages = {224 -- 230}, abstract = {The initiated energy transition leads to extensive changes in the supply of energy. The increasing use of renewable energy causes a shift of the produced power from centralized conventional power plants to decentralized energy plants. Because of this redistribution and the related change of load-flows, new challenges and problems for distribution system operators appear. This includes the integration of new loads and plants into the existing power grid and the guarantee of a high supply security and quality. It also includes strengthened requirements for the use and provision of reactive power. The project "SyNErgie" ("Systemoptimierendes Netz- und Energiemanagement f{\"u}r Verteilungsnetze der Zukunft") deals with the development of a new reactive power management, which gets embedded in grid planning and controlling processes. One focus of the project is on the integration of decentralized energy plants (DEPs) to the reactive power management. The aim is to develop a decentralized and self-sufficient reactive power control system, which only works with local available information (measures). Therefore is no necessity of a complex communication system to the grid control center. Self-controlled Q-controller in the DEPs get characteristic curves and control the reactive power sources with local measurements (e.g. current, voltage, effective power). This new reactive power control management aims for the reactive power compensation in order to increase the integration capacity of loads and plants in a grid [2]. In order to generate characteristic curves for DEPs, it is necessary to analyze the correlation behavior between the local available measurements at the DEPs and the overall-Q-behavior of the grid group at the transformer. In that regard, influencing quantities should be considered. The aim is to involve und evaluate all relevant influencing quantities in order to determine energy plants and certain operating points, in which the correlation behavior and the prediction for the overall-Q-behavior are sufficient. The next step is to develop a model that fits these correlation behaviors and generate characteristic curves. One method to generate characteristic curves for the Q-controllers is regression analysis. The developed Q-control-system with the characteristic curves will be tested, evaluated and optimized in a following field test in cooperation with distribution system operators.}, language = {de} } @inproceedings{RauchBrueckl, author = {Rauch, Johannes and Br{\"u}ckl, Oliver}, title = {Konzeptionierung netzplanerischer Prozessans{\"a}tze zur Ermittlung von Blindleistungskapazit{\"a}ten zum Ausgleich des Blindleistungsbedarfs in einer Netzregion}, series = {Tagungsband Tagung Zuk{\"u}nftige Stromnetze 26./27. Januar 2022 (online)}, booktitle = {Tagungsband Tagung Zuk{\"u}nftige Stromnetze 26./27. Januar 2022 (online)}, publisher = {Conexio-PSE GmbH}, address = {Pforzheim}, isbn = {978-3-948176-16-7}, doi = {10.35096/othr/pub-5866}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-58665}, pages = {117 -- 126}, abstract = {Um einen sicheren und zuverl{\"a}ssigen Stromnetzbetrieb zu gew{\"a}hrleisten, muss die Spannung im Grundfall als auch bei ungeplanten Ausf{\"a}llen in definierten Bereichen gehalten werden. Im {\"U}bertragungsnetz wird hierf{\"u}r bisher Blindleistung haupts{\"a}chlich aus Blindleistungskompensationsanlagen und konventionellen Großkraftwerken eingesetzt. Zuk{\"u}nftig wird nach \S12h EnWG eine marktgest{\"u}tzte Beschaffung dieser Dienstleistung zur Spannungsregelung vorgeschrieben. Zugleich ver{\"a}ndert sich der Blindleistungsbedarf der Netzbetriebsmittel durch die Integration erneuerbarer Energieanlagen und der Elektromobilit{\"a}t sowie durch den Netzausbau bei {\"U}bertragungs- und Verteilungsnetzbetreibern. Es bedarf somit angepasster Netzbetriebs- und Netzplanungskonzepte f{\"u}r ein technisch effizientes und wirtschaftlich g{\"u}nstiges Blindleistungsmanagement. Dieser Beitrag besch{\"a}ftigt sich damit, Prozessans{\"a}tze und Methodiken f{\"u}r ebendieses in der Netzplanung aufzuzeigen, um erforderliche Blindleistungskapazit{\"a}ten unter minimalen Gesamtkostenaufwand und unter Ber{\"u}cksichtigung einer effizienten Blindleistungsbedarfsdeckung zu bestimmen. Dabei liegt der Fokus verst{\"a}rkt in der Bedarfsanalyse.}, language = {de} }