@article{DeubzerSchillerMottoketal., author = {Deubzer, Michael and Schiller, Frank and Mottok, J{\"u}rgen and Niemetz, Michael and Margull, Ulrich}, title = {Effizientes Multicore-Scheduling in Eingebetteten Systemen - Teil 1: Algorithmen f{\"u}r zuverl{\"a}ssige Echtzeitsysteme}, series = {atp - Automatisierungstechnische Praxis}, journal = {atp - Automatisierungstechnische Praxis}, number = {9}, pages = {60 -- 67}, abstract = {Eingebettete Systeme unterliegen neben den funktionalen Anforderungen besonders nicht funktionalen Qualit{\"a}tsanforderungen wie Effizienz, Zuverl{\"a}ssigkeit und Echtzeitf{\"a}higkeit. Mit steigendem Bedarf an Rechenkapazit{\"a}t k{\"o}nnen bisherige Konzepte zur Leistungssteigerung von Singlecore-Systemen jedoch nicht mehr eingesetzt werden - der Umstieg auf Multicore-Systeme wird erforderlich. Im ersten Teil dieser Arbeit werden eine m{\"o}gliche Prozessorarchitektur f{\"u}r zuk{\"u}nftige Automotive Multicore-Systeme und die Abstraktion der Software f{\"u}r diese Systeme vorgestellt. Nach einer Klassifkation von Multicore-Scheduling-Algorithmen pr{\"a}sentieren wir exemplarisch einen Algorithmus mit statischer Taskallokation und einen Algorithmus mit dynamischer Taskallokation. Bei beiden Algorithmen handelt es sich um eine {\"U}berf{\"u}hrung theoretisch behandelter Algorithmen auf Automotive Systeme.}, language = {de} } @inproceedings{HobelsbergerDumkeMottoketal., author = {Hobelsberger, Martin and Dumke, Reiner and Mottok, J{\"u}rgen and Niemetz, Michael and Wirrer, Gerhard}, title = {An Experience-Based Repository of Reusable Components for an Component-Based Automotive Software System}, series = {Applied Software Measurement, proceedings of the joined International Conferences on Software Measurement IWSM/MetriKon/Mensura 2010, 10.-12. November 2010, Stuttgart, Germany}, booktitle = {Applied Software Measurement, proceedings of the joined International Conferences on Software Measurement IWSM/MetriKon/Mensura 2010, 10.-12. November 2010, Stuttgart, Germany}, pages = {218 -- 240}, language = {en} } @article{DeubzerMottok, author = {Deubzer, Michael and Mottok, J{\"u}rgen}, title = {Dependability von Systemen mit dynamischen Multicore-Schedulingalgorithmen}, series = {safetronic}, journal = {safetronic}, language = {de} } @article{DeubzerMottokBaerwald, author = {Deubzer, Michael and Mottok, J{\"u}rgen and B{\"a}rwald, Andreas}, title = {Dependability-Betrachtung von Multicore-Scheduling}, series = {HANSER Automotive}, journal = {HANSER Automotive}, number = {11}, pages = {24 -- 27}, abstract = {Der Embedded Markt stellt sich auf eine neue Herausforderung ein: denUmstieg von Singlecore- auf Multicore-Prozessorsysteme. Dabei soll dieUmsetzung der Norm ISO 26262 die Funktionale Sicherheit der elektri-schen und elektronischen Systeme im Kraftfahrzeug gew{\"a}hrleisten. In diesem Beitrag betrachten die Hochschule Regensburg und die T{\"U}V S{\"u}dAutomotive GmbH das Scheduling eines Echtzeitsystems als ein sicher-heitsrelevantes Sub-System.}, language = {de} } @inproceedings{HagelMottokUteschetal., author = {Hagel, Georg and Mottok, J{\"u}rgen and Utesch, Matthias and Landes, Dieter and Studt, Reimer}, title = {Software Engineering Lernen f{\"u}r die berufliche Praxis - Erfahrungen mit dem konstruktivistischen Methodenbaukasten}, series = {Proceedings of the 3rd Embedded Software Engineering Congress, 7. bis 9. Dezember 2010, Sindelfingen}, booktitle = {Proceedings of the 3rd Embedded Software Engineering Congress, 7. bis 9. Dezember 2010, Sindelfingen}, language = {de} } @inproceedings{DeubzerHobelsbergerMottoketal., author = {Deubzer, Michael and Hobelsberger, Martin and Mottok, J{\"u}rgen and Schiller, Frank and Dumke, Reiner and Siegle, Markus and Margull, Ulrich and Niemetz, Michael and Wirrer, Gerhard}, title = {Modeling and Simulation of Embedded Real-Time Multi-Core Systems}, series = {Proceedings of the 3rd Embedded Software Engineering Congress, 7. bis 9. Dezember 2010, Sindelfingen}, booktitle = {Proceedings of the 3rd Embedded Software Engineering Congress, 7. bis 9. Dezember 2010, Sindelfingen}, language = {en} } @inproceedings{BraunMottokMiedletal., author = {Braun, J{\"u}rgen and Mottok, J{\"u}rgen and Miedl, Christian and Greyer, D. and Minas, Mark}, title = {Fail-Safe und Fault-Tolerant Mechanismen}, series = {Proceedings of the 3rd Embedded Software Engineering Congress, 7. bis 9. Dezember 2010, Sindelfingen}, booktitle = {Proceedings of the 3rd Embedded Software Engineering Congress, 7. bis 9. Dezember 2010, Sindelfingen}, pages = {378 -- 386}, language = {en} } @inproceedings{SteindlMottokMeieretal., author = {Steindl, Michael and Mottok, J{\"u}rgen and Meier, Hans and Schiller, Frank and Fr{\"u}chtl, M.}, title = {Safeguarded Processing of Sensor Data}, series = {IT-SecurityArea (IT-SA 2009) vom 13.-15. Oktober 2009, N{\"u}rnberg}, booktitle = {IT-SecurityArea (IT-SA 2009) vom 13.-15. Oktober 2009, N{\"u}rnberg}, pages = {8}, abstract = {The spectrum of software tasks no longer includes only rare function controlling tasks for sensor actuator chains in reactive embedded systems. However, more and more responsible challenges like safety-critical scenarios are tackled. Therefore sensor data have to be safeguarded by several mechanism. An obvious and widely used approach is the use of two redundant hardware controllers, but this comes along with an additional cost, space and energy factor. Another way to fulfill certain safety properties is to implement a second diverse software channel in a single micro-controller architecture according the Safely Embedded Software (SES) approach. However, a lack of performance occurs by implementing this diverse channel for complex computations e.g. floating-point operations. This paper gives an approach for transferring the SES into a coprocessor and to migrate SES to a flexible and powerful FPGA architecture.}, language = {en} } @article{RaabMottokMeier, author = {Raab, Peter and Mottok, J{\"u}rgen and Meier, Hans}, title = {OSEK-RTOS f{\"u}r Jedermann (Teil 1)}, series = {Embedded Software Engineering Report}, volume = {53}, journal = {Embedded Software Engineering Report}, number = {September}, pages = {14 -- 15}, language = {de} } @article{RaabMottokMeier, author = {Raab, Peter and Mottok, J{\"u}rgen and Meier, Hans}, title = {OSEK-RTOS f{\"u}r Jedermann (Teil 2)}, series = {Embedded Software Engineering Report}, volume = {53}, journal = {Embedded Software Engineering Report}, pages = {10 -- 12}, language = {de} } @inproceedings{SteindlMottokMeieretal., author = {Steindl, Michael and Mottok, J{\"u}rgen and Meier, Hans and Schiller, Frank and Fr{\"u}chtl, M.}, title = {Migration of SES to FPGA Based Architectural Concepts}, series = {Proceedings of the Workshop 'Safely embedded software'}, booktitle = {Proceedings of the Workshop 'Safely embedded software'}, language = {en} } @article{Mottok, author = {Mottok, J{\"u}rgen}, title = {Safely embedded software}, series = {Embedded Software Engineering Report}, volume = {53}, journal = {Embedded Software Engineering Report}, pages = {10 -- 11}, language = {en} } @article{HartigHabermannMottok, author = {Hartig, Wolfgang and Habermann, Albert and Mottok, J{\"u}rgen}, title = {Mehr Qualit{\"a}t durch modellbasiertes Testen}, series = {Elektronik automotive 3}, journal = {Elektronik automotive 3}, pages = {32 -- 35}, language = {de} } @article{HartigHabermannMottok, author = {Hartig, Wolfgang and Habermann, Albert and Mottok, J{\"u}rgen}, title = {Model-based testing for better quality}, series = {Vector, Technicle Article}, journal = {Vector, Technicle Article}, language = {en} } @inproceedings{SchorerKuntzMottok, author = {Schorer, Michael and Kuntz, Stefan and Mottok, J{\"u}rgen}, title = {Beschreibung eines kooperativen Tasksystems mit OSEK-konformen Scheduler durch Petri Netze}, series = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, booktitle = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, pages = {637 -- 644}, language = {de} } @inproceedings{BaerwaldHauffMottok, author = {B{\"a}rwald, Andreas and Hauff, Harald and Mottok, J{\"u}rgen}, title = {Qualification and certification of development tools for safety-critical applications}, series = {Proceedings of Dependability@SIEMENS Conference}, booktitle = {Proceedings of Dependability@SIEMENS Conference}, abstract = {This paper presents an overview on qualification and certification of tools used in the phases of the safety lifecycle for safety-critical applications, either for development or for verification and validation. Software development tools are widely used in the development of safety-critical software systems. More verification and validation procedures will be automated by software tools to reduce time consuming manual testing. The impact of software tools on functional safety is discussed. Based on normative regulations like IEC 61508 and ISO DIS 26262 different approaches for tool qualification and certification are presented.}, language = {en} } @inproceedings{SteindlMottokMeieretal., author = {Steindl, Michael and Mottok, J{\"u}rgen and Meier, Hans and Schiller, Frank and Fr{\"u}chtl, M.}, title = {Diskussion des Einsatzes von Safely Embedded Software in FPGA-Architekturen}, series = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, booktitle = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, pages = {655 -- 661}, language = {de} } @inproceedings{KraemerMottokMeier, author = {Kr{\"a}mer, Stefan and Mottok, J{\"u}rgen and Meier, Hans}, title = {Modifikation des Taskzustandsmodells des LLREF-Schedulers auf einem Dual-Core-Prozess}, series = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, booktitle = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, pages = {628 -- 636}, language = {de} } @inproceedings{StamatescuDeubzerMottoketal., author = {Stamatescu, G. and Deubzer, Michael and Mottok, J{\"u}rgen and Popescu, Dan}, title = {Migration overhead in multiprocessor scheduling}, series = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, booktitle = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, pages = {645 -- 654}, language = {en} } @inproceedings{StudtMottokUteschetal., author = {Studt, Reimer and Mottok, J{\"u}rgen and Utesch, Matthias and Landes, Dieter}, title = {Anwendung der Bloom´schen Taxonomie auf Lehrinhalte des Software-Engineerings}, series = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, booktitle = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, pages = {583 -- 593}, language = {de} } @inproceedings{KraemerMottokMeier, author = {Kr{\"a}mer, Stefan and Mottok, J{\"u}rgen and Meier, Hans}, title = {Modifikation des Taskzustandsmodells des LLREF-Schedulers auf einem Dual-Core-Prozessor}, series = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, booktitle = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, pages = {628 -- 636}, language = {de} } @inproceedings{HobelsbergerMottok, author = {Hobelsberger, Martin and Mottok, J{\"u}rgen}, title = {Software Qualit{\"a}t - eine Glaubensfrage? Ein {\"U}berblick {\"u}ber Modelle der Softwarezuverl{\"a}ssigkeit}, series = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, booktitle = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, pages = {134 -- 148}, language = {de} } @inproceedings{DeubzerMargullMottoketal., author = {Deubzer, Michael and Margull, Ulrich and Mottok, J{\"u}rgen and Niemetz, Michael and Wirrer, Gerhard}, title = {Partitionierungs-Scheduling von Automotive Restricted Tasksystemen auf Multiprozessorplattformen}, series = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, booktitle = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, pages = {536 -- 542}, language = {de} } @misc{HobelsbergerMottokDumke, author = {Hobelsberger, Martin and Mottok, J{\"u}rgen and Dumke, Reiner}, title = {A model based safety analysis approach for embedded system architectures}, series = {Tag der Technik 2008}, journal = {Tag der Technik 2008}, language = {en} } @misc{DeubzerMottokFlugetal., author = {Deubzer, Michael and Mottok, J{\"u}rgen and Flug, Christian and Zeitler, Thomas}, title = {A method of performance analysis for embedded system architectures}, series = {8. Tag der Technik am 13. Juni 2008 an der Hochschule Regensburg}, journal = {8. Tag der Technik am 13. Juni 2008 an der Hochschule Regensburg}, language = {en} } @article{Mottok, author = {Mottok, J{\"u}rgen}, title = {Aktuelle Forschungsergebnisse aus dem "Laboratory for Safe and Secure Systems"(LaS3)}, series = {Jahresr{\"u}ckblick 2008 des Bayerischen IT-Sicherheitsclusters}, journal = {Jahresr{\"u}ckblick 2008 des Bayerischen IT-Sicherheitsclusters}, pages = {13 -- 15}, language = {de} } @article{HobelsbergerMottokDeubzer, author = {Hobelsberger, Martin and Mottok, J{\"u}rgen and Deubzer, Michael}, title = {Modellbasierte Sicherheitsanalysen von Software Architekturen}, series = {Jahresr{\"u}ckblick 2008 des Bayerischen IT-Sicherheitsclusters}, journal = {Jahresr{\"u}ckblick 2008 des Bayerischen IT-Sicherheitsclusters}, pages = {14}, language = {de} } @article{DeubzerMottokHobelsberger, author = {Deubzer, Michael and Mottok, J{\"u}rgen and Hobelsberger, Martin}, title = {Profiling in Embedded Real-Time Software Systemen}, series = {Jahresr{\"u}ckblick 2008 des Bayerischen IT-Sicherheitsclusters}, journal = {Jahresr{\"u}ckblick 2008 des Bayerischen IT-Sicherheitsclusters}, pages = {13}, language = {en} } @inproceedings{SchirdewahnMottok, author = {Schirdewahn, B. and Mottok, J{\"u}rgen}, title = {Implementierungsl{\"o}sungen f{\"u}r die Eigenentwicklung eines deterministischen, nicht preemptiven Echtzeit Betriebssystems zur Verwaltung eingebetteter Applikationen}, series = {Embedded Software Engineering Kongress, Tagungsband ; 8. bis 10. Dezember 2008, Sindelfingen}, booktitle = {Embedded Software Engineering Kongress, Tagungsband ; 8. bis 10. Dezember 2008, Sindelfingen}, pages = {141 -- 147}, language = {de} } @inproceedings{DeubzerMottokFlugetal., author = {Deubzer, Michael and Mottok, J{\"u}rgen and Flug, Christian and Zeitler, Thomas}, title = {Profiling Performance Analyse von Embedded Real-Time System Architekturen}, series = {Embedded Software Engineering Kongress, Tagungsband ; 8. bis 10. Dezember 2008, Sindelfingen}, booktitle = {Embedded Software Engineering Kongress, Tagungsband ; 8. bis 10. Dezember 2008, Sindelfingen}, pages = {155 -- 167}, language = {en} } @article{HummelMottokEgenetal., author = {Hummel, M. and Mottok, J{\"u}rgen and Egen, R. and Schiller, Frank and Mattes, T. and Blum, M. and Druckstein, F.}, title = {Generische Safety-Architektur f{\"u}r Kfz-Software}, series = {Spektrum, das Magazin der Hochschule Regensburg}, journal = {Spektrum, das Magazin der Hochschule Regensburg}, address = {Regensburg}, organization = {Hochschule f{\"u}r Angewandte Wissenschaften Regensburg}, language = {de} } @article{FederrathMottokPloessletal., author = {Federrath, H. and Mottok, J{\"u}rgen and Pl{\"o}ßl, K. and V{\"o}lkl, Thomas}, title = {Automotive safety and security}, series = {Jahresr{\"u}ckblick 2007 des Bayerischen IT-Sicherheitsclusters}, journal = {Jahresr{\"u}ckblick 2007 des Bayerischen IT-Sicherheitsclusters}, pages = {25}, language = {de} } @inproceedings{AlfransederKrapfMaderetal., author = {Alfranseder, Martin and Krapf, Tobias and Mader, Ralph and Niemetz, Michael and Mottok, J{\"u}rgen and Siemers, Christian}, title = {An Efficient Partitioning Strategy for Runnables in Weakly Dependent Tasks on Embedded Multi-Core Systems}, series = {Embedded real-time software and systems (ERTS² 2014), Feb 2014, Toulouse, France}, booktitle = {Embedded real-time software and systems (ERTS² 2014), Feb 2014, Toulouse, France}, abstract = {With multi-core controllers entering the area of automotive control ECUs, strategies for parallelizing the control- algorithms come into focus. This paper deals with a special part of automotive powertrain software, called state transitions. Since dependencies between runnables executed there are weak, the transitions provide a good basis for parallelization. We present a strategy of how to distribute efficiently the execution of runnables to different cores while taking care of inner and outer dependencies. The strategy is accompanied by two case studies demonstrating the performance of the concept. The first one is carried out to find the most efficient strategies of parallelize state transitions based on randomly generated, simulated state transitions. In the second one, the developed partitioning strategies are applied to a real software project for an automotive powertrain system.}, language = {en} } @inproceedings{AlfransederDeubzerJustusetal., author = {Alfranseder, Martin and Deubzer, Michael and Justus, Benjamin and Mottok, J{\"u}rgen and Siemers, Christian}, title = {An Efficient Spin-Lock Based Multi-Core Resource Sharing Protocol}, series = {33rd IEEE International Performance, Computing, and Communications Conference (IPCCC), Austin (TX), USA, 5-7 December 2014}, booktitle = {33rd IEEE International Performance, Computing, and Communications Conference (IPCCC), Austin (TX), USA, 5-7 December 2014}, doi = {10.1109/PCCC.2014.7017090}, abstract = {We present in this paper a new lock-based resource sharing protocol PWLP (Preemptable Waiting Locking Protocol) for embedded multi-core processors. It is based on the busy-wait model and works with non-preemptive critical sections while task may be preempted by tasks with a higher priority when waiting for resources. Our protocol can be applied in partitioned as well as global scheduling scenarios, in which task-fix, job-fix or dynamically assigned priorities may be used. Furthermore, the PWLP permits nested requests to shared resources. Finally, we present a case study based on event-based simulations in which the FMLP (Flexible Multiprocessor Locking Protocol) and the proposed PWLP are compared.}, language = {en} } @inproceedings{ThielHacklMottok, author = {Thiel, P. and Hackl, Magnus and Mottok, J{\"u}rgen}, title = {Designing efficient Node.js applications - Approaching useful patterns}, series = {4th Applied Research Conference, 5th July 2014, Ingolstadt}, booktitle = {4th Applied Research Conference, 5th July 2014, Ingolstadt}, publisher = {Shaker}, address = {Aachen}, isbn = {978-3-8440-2875-1}, pages = {40 -- 46}, language = {en} } @inproceedings{SchmidhuberDeubzerMaderetal., author = {Schmidhuber, Stefan and Deubzer, Michael and Mader, Ralph and Niemetz, Michael and Mottok, J{\"u}rgen}, title = {Towards the Derivation of Guidelines for the Deployment of Real-Time Tasks on a Multicore Processor}, series = {4th International Symposium on Model-Based Safety and Assessment (IMBSA 2014), Munich, Germany, October 27-29, 2014, Proceedings}, booktitle = {4th International Symposium on Model-Based Safety and Assessment (IMBSA 2014), Munich, Germany, October 27-29, 2014, Proceedings}, publisher = {Springer}, address = {Munich}, isbn = {978-3-319-12213-7}, doi = {10.1007/978-3-319-12214-4_12}, pages = {152 -- 165}, abstract = {The deployment of automotive software on a multicore processor includes the task of mapping executables to cores. Given the number of possible solutions, integrators have to solve a complex problem. Considering multiple, often conflicting goals like minimizing task response times and memory consumption, complexity further increased with the advent of multicore processors. We present a model-based approach for deriving design rules supporting integrators with statically mapping tasks to a multicore ECU. First, an evolutionary algorithm is used to sample the design space. For each sample, a model-based analysis is performed, resulting in the required fitness values according to the system metric objectives. Finally, subsets of the sample population are used to derive deployment guidelines by evaluating similarities between highly ranked solutions. This reduces the number of solutions to be considered by the integrators by orders of magnitude. In a case-study, we demonstrate the developed approach on an artificial automotive engine management system.}, language = {en} } @inproceedings{KraemerRaabMottoketal., author = {Kr{\"a}mer, Stefan and Raab, Peter and Mottok, J{\"u}rgen and Racek, Stanislav}, title = {Comparison of Enhanced Markov Models and Discrete Event Simulation - for evaluation of probabilistic Faults in safety-critical real-time task sets}, series = {Proceedings of EUROMICRO DSD 2014 - 17th Euromicro Conference on Digital System Design}, booktitle = {Proceedings of EUROMICRO DSD 2014 - 17th Euromicro Conference on Digital System Design}, doi = {10.1109/DSD.2014.42}, pages = {591 -- 598}, abstract = {In this paper we present simulation and model based approaches for evaluating and validating the temporal and safety relevant properties of software intensive safety-critical real-time embedded systems. A high level reliability model of a safe task execution is described by a continuous-time Markov process, enhanced by the modeling of execution times. It is shown that the behavior - regarding real-time and safety metrics - of this theoretical model can be transferred into an abstract system timing model, which then can be analyzed by a discrete event simulation approach. The verification of the discrete event simulation by Markov models offers the possibility of a holistic approach for reliability analysis combined with schedulability analysis of complex safety-critical multicore real-time systems by the discrete event simulation.}, language = {en} } @misc{Kraemer, author = {Kr{\"a}mer, Stefan}, title = {Effects of Arbitrary Hardware Faults on Multicore Scheduling in Safety-critical Applications - Evaluation by enhanced Markov models and discrete event simulation}, series = {2014 PESW - The 2nd Prague Embedded Systems Workshop, June 2014}, journal = {2014 PESW - The 2nd Prague Embedded Systems Workshop, June 2014}, language = {en} } @inproceedings{OklapiDeubzerSchmidhuberetal., author = {Oklapi, Erna and Deubzer, Michael and Schmidhuber, Stefan and Lalo, Erjola and Mottok, J{\"u}rgen}, title = {Optimization of Real-Time Multicore Systems Reached by a Genetic Algorithm Approach for Runnable Sequencing}, series = {2014 International Conference on Applied Electronics, Pilsen, Czech Republic}, booktitle = {2014 International Conference on Applied Electronics, Pilsen, Czech Republic}, doi = {10.1109/AE.2014.7011709}, pages = {233 -- 238}, abstract = {The deployment of complex real-time systems with everyday increasing demands and possibilities, is a challenging task for engineers when performance and efficiency have to be maximized while cost have to be minimized at the same time. For already designed systems it became necessary to perform different modifications in order to find optimal software architecture configuration by respecting all timing constraints which are essential when speaking of real-time systems. In this work, we present a model-based approach of optimizing the execution sequence of runnables within tasks in order to reduce the system's reaction times by improving the overall signal flow duration. Hereby, a genetic optimization algorithm is used to create and evaluate multiple solutions for the runnable sequencing problem. We conclude by demonstration the efficiency of the presented approach with experimental results.}, language = {en} } @inproceedings{OklapiDeubzerSchmidhuberetal., author = {Oklapi, Erna and Deubzer, Michael and Schmidhuber, Stefan and Mottok, J{\"u}rgen}, title = {Verification of an Evolutionary Optimization Algorithm for Runnable Sequencing Problem}, series = {4th Applied Research Conference, 5th July 2014, Ingolstadt}, booktitle = {4th Applied Research Conference, 5th July 2014, Ingolstadt}, language = {en} } @inproceedings{SoskaSchummJosephetal., author = {Soska, Alexander and Schumm, Michael and Joseph, Saskia and Reschke, Michael and Mottok, J{\"u}rgen and Niemetz, Michael and Schroll-Decker, Irmgard}, title = {Comparison of Frontal Lecture and Workshop Learning Arrangements in a Software Engineering Education Project}, series = {2014 IEEE Global Engineering Education Conference (EDUCON), Istanbul, Turkey}, booktitle = {2014 IEEE Global Engineering Education Conference (EDUCON), Istanbul, Turkey}, doi = {10.1109/EDUCON.2014.6826162}, pages = {653 -- 658}, abstract = {The increase in complexity of software and its creation over the last decades requires an increase in the quality of the education of software engineering professionals. The number of Universities which answer this call by replacing or extending lectures with simulated software projects is constantly rising. However, the question how to best transfer new technological knowledge needed to be successful within this projects to the students remains open. Therefore this paper will present a comparison between the classical frontal lecture and a modern workshop learning arrangement used within these projects. By the use of workshops not only the knowledge transfer but also the acquisition of personal and social competences will be facilitated. Furthermore positive experiences with workshops at university level will support life-long learning.}, language = {en} } @inproceedings{SoskaMottok, author = {Soska, Alexander and Mottok, J{\"u}rgen}, title = {A New Conceptual Contribution for Serious Games in Academic Software Engineering Education}, series = {European Conference on Software Engineering Education 2014 (ECSEE), 27 and 28 November 2014 in Seeon Monastery}, booktitle = {European Conference on Software Engineering Education 2014 (ECSEE), 27 and 28 November 2014 in Seeon Monastery}, publisher = {Shaker}, address = {Aachen}, isbn = {978-3-8440-3067-9}, pages = {241 -- 254}, abstract = {Nowadays, the popularity and field of application of serious games grows steadily. This educational method offers attractive pportunities for teaching and training by combining playful elements with learning content. By using game mechanics, thinking and technique, theoretical subject matters are treated in a fun and engaging way. Thereby, serious games utilize our intrinsic motivation to discover the surroundings in a playful manner. Embedded in educational settings, the goal is to mediate academic and non-academic knowledge to the students. Especially in the field of software engineering it is important to have skills which go beyond pure technical knowledge. Yet, the use of serious games is still a manageable amount. With this paper, we give a contribution to the theoretical design and development of serious games based on playful learning method and its relation to research-based learning in universal context. In addi- tion we analyze the existing serious games in software engineering and present our thoughts about planning our own.}, language = {en} } @inproceedings{KraemerRaabMottok, author = {Kr{\"a}mer, Stefan and Raab, Peter and Mottok, J{\"u}rgen}, title = {Simulationsbasierte Reliability-Analyse - Einfl{\"u}sse von zuf{\"a}lligen Fehlern auf das Echtzeit-Scheduling}, series = {Tagungsband 5th Embedded Software Engineering Kongress, 3. bis 7. Dezember 2012, Sindelfingen}, booktitle = {Tagungsband 5th Embedded Software Engineering Kongress, 3. bis 7. Dezember 2012, Sindelfingen}, pages = {613 -- 622}, language = {de} } @inproceedings{SchummJosephMottoketal., author = {Schumm, Michael and Joseph, Saskia and Mottok, J{\"u}rgen and Niemetz, Michael and Schroll-Decker, Irmgard}, title = {Lernarrangements im software engineering und deren evaluation - neue konzepte f{\"u}r hochschule und lebenslanges Lernen}, series = {Tagungsband 5th Embedded Software Engineering Kongress, 3. bis 7. Dezember 2012, Sindelfingen}, booktitle = {Tagungsband 5th Embedded Software Engineering Kongress, 3. bis 7. Dezember 2012, Sindelfingen}, language = {de} } @inproceedings{BraunMottokMiedletal., author = {Braun, J{\"u}rgen and Mottok, J{\"u}rgen and Miedl, Christian and Geyer, Dirk and Minas, Mark}, title = {Increasing the reliability of single and multicore systems with software rejuvenation and coded processing}, series = {Automotive Safety \& Security 2012, Sicherheit und Zuverl{\"a}ssigkeit f{\"u}r automobile Informationstechnik, 14.-15. Nov. 2012, Karlsruhe}, booktitle = {Automotive Safety \& Security 2012, Sicherheit und Zuverl{\"a}ssigkeit f{\"u}r automobile Informationstechnik, 14.-15. Nov. 2012, Karlsruhe}, pages = {163 -- 178}, abstract = {The safety of electric vehicles has the highest priority because it helps contribute to customer confidence and thereby ensures further growth of the electromobility market. Therefore in series production redundant hardware concepts like dual core microcontrollers running in lock-step-mode are used to reach ASIL D safety requirements given from the ISO 26262. Coded processing is capable of reducing redundancy in hardware by adding diverse redundancy in software, e.g. by specific coding of data and instructions. A system with two coded processing channels is considered. One channel is active and one is in cold standby. When the active channel fails, the service is switched from the active channel to the standby channel. It is imaginable that the two channels with implemented coded processing are running with time redundancy on a single core or on a multi core system where for example different ASIL levels are partitioned on different cores. In this paper a redundant concept based on coded processing and software rejuvenation will be taken into account.}, language = {en} } @inproceedings{AlfransederMottok, author = {Alfranseder, Martin and Mottok, J{\"u}rgen}, title = {Kommunikationsmechanismen f{\"u}r sicherheitskritische multi-core Echtzeit-Systeme}, series = {5th Automotive Summerschool, Regensburg, September 2012}, booktitle = {5th Automotive Summerschool, Regensburg, September 2012}, language = {de} } @inproceedings{MiedlBraun, author = {Miedl, Christian and Braun, J{\"u}rgen}, title = {Powertrain and electric system design of a 800-volt all-electric car}, series = {European Conference on Nanoelectronics and Embedded Systems for Electric Mobility, eMotion in Smart Cities, 24.-28. September, 2012, Bologna, Italy}, booktitle = {European Conference on Nanoelectronics and Embedded Systems for Electric Mobility, eMotion in Smart Cities, 24.-28. September, 2012, Bologna, Italy}, language = {en} } @inproceedings{BraunMottokMiedletal., author = {Braun, J{\"u}rgen and Mottok, J{\"u}rgen and Miedl, Christian and Geyer, Dirk and Minas, Mark}, title = {Capability of single hardware channel for automotive safety applications according to ISO 26262}, series = {2012 International Conference on Applied Electronics (AE 2012), Pilsen, Czech Republic, 5 - 7 September 2012}, booktitle = {2012 International Conference on Applied Electronics (AE 2012), Pilsen, Czech Republic, 5 - 7 September 2012}, isbn = {978-80-261-0038-6}, pages = {41 -- 45}, language = {en} } @inproceedings{KraemerRaabMottoketal., author = {Kr{\"a}mer, Stefan and Raab, Peter and Mottok, J{\"u}rgen and Racek, Stanislav}, title = {Reliability analysis of real-time scheduling by means of stochastic simulation}, series = {2012 International Conference on Applied Electronics (AE 2012), Pilsen, Czech Republic, 5 - 7 September 2012}, booktitle = {2012 International Conference on Applied Electronics (AE 2012), Pilsen, Czech Republic, 5 - 7 September 2012}, pages = {151 -- 156}, abstract = {We present a simulation-based approach to reliability analysis combined with a schedulability analysis of software intensive embedded real-time systems. In such a system not only does the software execution have to be hardened against soft errors, e.g., by means of coded processing or diverse execution, but also the real-time requirements have still to be met in the presence of such error to guarantee a safe operation of the system. For that reason, the influence regarding the real-time characteristics of a given sporadic error with a certain error rate is analyzed by means of a Monte Carlo simulation. Different safety design patterns are introduced and compared. Furthermore, the impact on the schedulability of an embedded system is discussed.}, language = {en} } @incollection{MottokAlfransederSchmidhuberetal., author = {Mottok, J{\"u}rgen and Alfranseder, Martin and Schmidhuber, Stefan and Mucha, Matthias and Sailer, Andreas}, title = {How to improve the reactiveness and efficiency of embedded multicore systems by use of probabilistic simulation and optimization techniques}, series = {Improving Disaster Resilience and Mitigation - New Means and Tools. NATO Science for Peace and Security Series C: Environmental Security}, booktitle = {Improving Disaster Resilience and Mitigation - New Means and Tools. NATO Science for Peace and Security Series C: Environmental Security}, editor = {Teodorescu, Horia-Nicolai and Kirschenbaum, Alan and Cojocaru, Svetlana and Bruderlein, Claude}, publisher = {Springer}, address = {Dodrecht}, doi = {10.1007/978-94-017-9136-6_16}, pages = {253 -- 268}, abstract = {Safe and reliable multi-core technology becomes more and more important in the field of embedded systems. Today's and future embedded systems require increasing performance while being more energy efficient. Moreover, the functional safety for these embedded systems has to be improved or developed completely new. In this chapter, we first address the challenges of embedded multi-core real-time systems. To raise the resilience of such systems we use the deadlock-free synchronization model of Block et al. (A flexible real-time locking protocol for multiprocessors. 2012 IEEE international conference on embedded and real-time computing systems and applications, vol 0, pp 47-56, 2007). The metric mean Normalized Blocking Time (mNBT) is hereby used to measure the timing effects of the blocking behavior of strongly interacting tasks. In a second step, we present a model-based approach to map the tasks of an embedded real-time system to the cores of a multi-core processor. Moreover, we derive an execution time model from runtime measurements of software functions. This information is then used to perform precise probabilistic simulations of different task-to-core mappings and evaluate them with regard to task response times, inter-task blocking overhead and load distribution. Subsequently, we integrate the probabilistic simulation within an optimization technique to systematically improve the task-to-core mapping. We conclude with a case-study, where we demonstrate the effectiveness of the presented approach by optimizing the task-to-core mapping of a practical automotive powertrain system.}, language = {en} } @inproceedings{KraemerSimsekBraunetal., author = {Kr{\"a}mer, Stefan and Simsek, Erol and Braun, J{\"u}rgen and Deubzer, Michael and Stingl, Armin and Hobelsberger, Martin and Mottok, J{\"u}rgen}, title = {Mut zu Fehlern, um die Qualit{\"a}t zu steigern - Fault-Injection zur Steigerung der Zuverl{\"a}ssigkeit}, series = {Tagungsband, 6th Embedded Software Engineering, Kongress 2013, 2. bis 6. Dezember 2013, Sindelfingen}, booktitle = {Tagungsband, 6th Embedded Software Engineering, Kongress 2013, 2. bis 6. Dezember 2013, Sindelfingen}, isbn = {978-3-8343-2408-5}, pages = {577 -- 585}, language = {de} } @inproceedings{SailerSchmidhuberDeubzeretal., author = {Sailer, Andreas and Schmidhuber, Stefan and Deubzer, Michael and Mottok, J{\"u}rgen}, title = {Amalthea - Plattform f{\"u}r kontinuierliche, modellbasierte Entwicklung}, series = {Tagungsband, 6th Embedded Software Engineering, Kongress 2013, 2. bis 6. Dezember 2013, Sindelfingen}, booktitle = {Tagungsband, 6th Embedded Software Engineering, Kongress 2013, 2. bis 6. Dezember 2013, Sindelfingen}, pages = {538 -- 544}, language = {de} } @inproceedings{RaabRacekKraemeretal., author = {Raab, Peter and Racek, Stanislav and Kr{\"a}mer, Stefan and Mottok, J{\"u}rgen}, title = {Data Flow Analysis of Software Executed by Unreliable Hardware}, series = {16th Euromicro Conference on Digital System Design, Los Alamitos, CA, USA}, booktitle = {16th Euromicro Conference on Digital System Design, Los Alamitos, CA, USA}, doi = {10.1109/DSD.2013.35}, pages = {243 -- 249}, abstract = {The data flow is a crucial part of software execution in recent applications. It depends on the concrete implementation of the realized algorithm and it influences the correctness of a result in case of hardware faults during the calculation. In logical circuits, like arithmetic operations in a processor system, arbitrary faults become a more tremendous aspect in future. With modern manufacturing processes, the probability of such faults will increase and the result of a software's data flow will be more vulnerable. This paper shows a principle evaluation method for the reliability of a software's data flow with arbitrary soft errors also with the concept of fault compensation. This evaluation is discussed by means of a simple example based on an addition.}, language = {en} } @inproceedings{BraunMottok, author = {Braun, J{\"u}rgen and Mottok, J{\"u}rgen}, title = {Fail-Safe and Fail-Operational Systems safeguarded with Coded Processing}, series = {2013 IEEE EUROCON - International Conference on Computer as a Tool, Zagreb, Croatia, July 1-4, 2013}, booktitle = {2013 IEEE EUROCON - International Conference on Computer as a Tool, Zagreb, Croatia, July 1-4, 2013}, isbn = {978-1-4673-2231-7}, doi = {10.1109/EUROCON.2013.6625234}, pages = {1878 -- 1885}, abstract = {Safety has the highest priority because it helps contribute to customer confidence and thereby ensures further growth of the new markets, like electromobility. Therefore in series production redundant hardware concepts like dual core microcontrollers running in lock-step-mode are used to reach for example ASIL D safety requirements given from the ISO 26262. Coded processing is capable of reducing redundancy in hardware by adding diverse redundancy in software, e.g. by specific coding of data and instructions. A system with two coded processing channels is considered. Both channels are active. When one channel fails, the service can be continued with the other channel. It is imaginable that the two channels with implemented coded processing are running with time redundancy on a single core or on a multi core system where for example different ASIL levels are partitioned on different cores. In this paper a redundancy concept based on coded processing will be taken into account. The improvement of the Mean Time To Failure by safeguarding the system with coded processing will be computed for fail-safe as well as for fail-operational systems. The use of the coded processing approach in safeguarding failsafe systems is proved.}, language = {en} } @inproceedings{RaabKraemerMottok, author = {Raab, Peter and Kr{\"a}mer, Stefan and Mottok, J{\"u}rgen}, title = {Error Model and the Reliability of Arithmetic Operations}, series = {2013 IEEE EUROCON - International Conference on Computer as a Tool, Zagreb, Croatia, July 1-4, 2013}, booktitle = {2013 IEEE EUROCON - International Conference on Computer as a Tool, Zagreb, Croatia, July 1-4, 2013}, doi = {10.1109/EUROCON.2013.6625047}, pages = {630 -- 637}, abstract = {Error detecting and correcting codes are widely used in data transmission, storage systems and also for data processing. In logical circuits like arithmetic operations, arbitrary faults can cause errors in the result. However in safety critical applications, it is important to avoid those errors which would lead to system failures. Several approaches are known to protect the result of operations during software processing. In the same way like transmission systems, coded processing uses codes for fault detection. But in contrast to transmission systems, there is no adequate channel model available which makes it possible to evaluate the residue error probability of an arithmetic operation in an analytical way. This paper tries to close the gap of arithmetic error models by the development of a model for an ordinary addition in a computer system. Thus, the reliability of an addition's result can be analytically evaluated.}, language = {en} } @inproceedings{AlfransederKrapfMottoketal., author = {Alfranseder, Martin and Krapf, Tobias and Mottok, J{\"u}rgen and Siemers, Christian}, title = {Synchronisationsverfahren in embedded Multicoresystemen}, series = {Tagungsband, 6th Embedded Software Engineering, Kongress 2013, 2. bis 6. Dezembern 2013, Sindelfingen}, booktitle = {Tagungsband, 6th Embedded Software Engineering, Kongress 2013, 2. bis 6. Dezembern 2013, Sindelfingen}, publisher = {Vogel Business Media}, address = {W{\"u}rzburg}, language = {de} } @inproceedings{AlfransederMuchaSchmidhuberetal., author = {Alfranseder, Martin and Mucha, Matthias and Schmidhuber, Stefan and Sailer, Andreas and Niemetz, Michael and Mottok, J{\"u}rgen}, title = {A modified synchronization model for dead-lock free concurrent execution of strongly interacting task sets in embedded systems}, series = {2013 International Conference on Applied Electronics (AE 2013), IEEE, 10-12 September 2013, Pilsen, Czech Republic}, volume = {18}, booktitle = {2013 International Conference on Applied Electronics (AE 2013), IEEE, 10-12 September 2013, Pilsen, Czech Republic}, pages = {13 -- 18}, abstract = {Global scheduling algorithms are very promising for application in embedded real-time systems using multi-core controllers. In this paper we want to make a first step forward to apply such scheduling methods on real existing systems. Especially a new resource model is necessary to avoid deadlocks, as this goal can not be achieved by using the standard OSEK Priority Ceiling Protocol when shared global resources are in use. We also introduce the new metric mean Normalized Blocking Time in order to be able to compare locking mechanisms according to the timing effects of their blocking behavior. Finally we give a simulative application example of the new metric by the use of two different kinds of semaphore models and an example task set typical for existing embedded real-time systems in the automotive powertrain environment.}, language = {en} } @misc{AlfransederSchmidhuberMuchaetal., author = {Alfranseder, Martin and Schmidhuber, Stefan and Mucha, Matthias and Sailer, Andreas and Mottok, J{\"u}rgen}, title = {How to improve the reactiveness and efficiency of embedded multicore systems by use of probabilistic simulation and optimization techniques: A case study}, series = {Advanced Research Workshop: Improving Disaster Resilience and Mitigation - New Means and Tools, Trends, Iasi}, journal = {Advanced Research Workshop: Improving Disaster Resilience and Mitigation - New Means and Tools, Trends, Iasi}, language = {en} } @techreport{PfallerMottok, type = {Working Paper}, author = {Pfaller, M. and Mottok, J{\"u}rgen}, title = {Developing the e-learning class 'practical training in c'}, language = {en} } @inproceedings{SailerSchmidhuberDeubzeretal., author = {Sailer, Andreas and Schmidhuber, Stefan and Deubzer, Michael and Alfranseder, Martin and Mucha, Matthias and Mottok, J{\"u}rgen}, title = {Optimizing the task allocation step for multi-core processors within autosar}, series = {2013 International Conference on Applied Electronics, IEEE, Pilsen, Czech Republic}, booktitle = {2013 International Conference on Applied Electronics, IEEE, Pilsen, Czech Republic}, abstract = {We present a model-based optimization approach for the task allocation problem in embedded multi-core systems. The information therefore is obtained from a system description in AUTOSAR and runtime measurements of the runnables in hardware traces. Based on this an initial software partitioning of runnables to tasks is created. We then use a genetic algorithm to create and evaluate solutions to the task allocation problem. Each solution is hereby evaluated using a discrete event-based simulation, which allows the evaluation with regard to real-time properties, resource consumption and data-communication overhead. The significance of our approach is then shown in a case-study. There, we optimize the task allocation of an embedded system, whose complexity is comparable to that of an actual system, on a multi-core processor. Finally, the results of the optimization are transferred to an ECU Configuration Description to enable further development in compliance with the AUTOSAR methodology.}, language = {en} } @inproceedings{MottokHagelUteschetal., author = {Mottok, J{\"u}rgen and Hagel, Georg and Utesch, Matthias and Waldherr, Franz}, title = {Konstruktivistische Didaktik - ein Rezept f{\"u}r eine bessere Software Engineering Ausbildung?}, series = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, booktitle = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, pages = {601 -- 610}, language = {de} } @inproceedings{SchmidtMottok, author = {Schmidt, Peter and Mottok, J{\"u}rgen}, title = {Memorandum der Bioagile Software- und Systementwicklung}, series = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, booktitle = {Proceedings of the 2nd Embedded Software Engineering Congress, 8. bis 10. Dezember 2009, Sindelfingen}, pages = {487 -- 497}, language = {de} } @inproceedings{MottokSchiller, author = {Mottok, J{\"u}rgen and Schiller, Frank}, title = {Safely embedded software and MISRA C++: 2008 - a safety framework for c++}, series = {Proceedings of the SAFETY@SIEMENS Conference}, booktitle = {Proceedings of the SAFETY@SIEMENS Conference}, language = {en} } @inproceedings{MottokSchiller, author = {Mottok, J{\"u}rgen and Schiller, Frank}, title = {MISRA C++:2008 and safely embedded software - a safety framework for C++}, series = {Proceedings of the Automotive Safety \& Security Conference}, booktitle = {Proceedings of the Automotive Safety \& Security Conference}, language = {en} } @inproceedings{HobelsbergerMottokDumke, author = {Hobelsberger, Martin and Mottok, J{\"u}rgen and Dumke, Reiner}, title = {Modellbasierte Sicherheitsanalysen von Software-Architekturen}, series = {Embedded Software Engineering Kongress, Tagungsband ; 8. bis 10. Dezember 2008, Sindelfingen}, booktitle = {Embedded Software Engineering Kongress, Tagungsband ; 8. bis 10. Dezember 2008, Sindelfingen}, pages = {436 -- 443}, language = {de} } @inproceedings{SchmidtMottok, author = {Schmidt, Peter and Mottok, J{\"u}rgen}, title = {"Werkstattbericht" Bioagile Softwareentwicklung}, series = {Embedded Software Engineering Kongress, Tagungsband ; 8. bis 10. Dezember 2008, Sindelfingen}, booktitle = {Embedded Software Engineering Kongress, Tagungsband ; 8. bis 10. Dezember 2008, Sindelfingen}, pages = {455 -- 460}, language = {de} } @inproceedings{Mottok, author = {Mottok, J{\"u}rgen}, title = {Safely embedded software- a safety framework for c++}, series = {Proceedings of the 1st Embedded Software Engineering Conference, 8. bis 10. Dezember 2008, Sindelfingen}, booktitle = {Proceedings of the 1st Embedded Software Engineering Conference, 8. bis 10. Dezember 2008, Sindelfingen}, pages = {444 -- 449}, language = {en} } @inproceedings{MottokSchillerVoelkletal., author = {Mottok, J{\"u}rgen and Schiller, Frank and V{\"o}lkl, Thomas and Zeitler, Thomas}, title = {A concept for a safe realization of a state machine in embedded automotive applications}, series = {Computer safety, reliability, and security, 26th International Conference, SAFECOMP 2007, Nuremberg, Germany, September 18-21, 2007; proceedings}, booktitle = {Computer safety, reliability, and security, 26th International Conference, SAFECOMP 2007, Nuremberg, Germany, September 18-21, 2007; proceedings}, doi = {10.1007/978-3-540-75101-4_2}, pages = {283 -- 288}, abstract = {Currently, both fail safe and fail operational architectures are based on hardware redundancy in automotive embedded systems. In contrast to this approach, safety is either a result of diverse software channels or of one channel of specifically coded software within the framework of Safely Embedded Software. Product costs are reduced and flexibility is increased. The overall concept is inspired by the well-known Vital Coded Processor approach. Since Mealy state machines are frequently used in embedded automotive systems, application software with a general Mealy state machine is realized differently with Safely Embedded Software starting from the high level programming language C with corresponding measurements.}, language = {en} } @article{HobelsbergerMottokKuntz, author = {Hobelsberger, Martin and Mottok, J{\"u}rgen and Kuntz, Stefan}, title = {Architekturmodellierung: Vergleich von EAST ADL und SAE AADL}, series = {Hanser Automotive}, journal = {Hanser Automotive}, number = {7-8}, pages = {43 -- 47}, language = {de} } @article{SchillerMottokBlumetal., author = {Schiller, Frank and Mottok, J{\"u}rgen and Blum, M. and Duckstein, F. and Egen, R. and Hummel, M. and Mattes, T.}, title = {Generische Safety-Architektur f{\"u}r KFZ-Software}, series = {Hanser automotive}, journal = {Hanser automotive}, pages = {52 -- 54}, language = {de} } @misc{RennerPozzobonMottok, author = {Renner, Sebastian and Pozzobon, Enrico and Mottok, J{\"u}rgen}, title = {Current and Future Efforts in Benchmarking NIST LWC Ciphers}, series = {4th Lightweight Cryptography Workshop 2020 at NIST, Gaithersburg, USA}, journal = {4th Lightweight Cryptography Workshop 2020 at NIST, Gaithersburg, USA}, language = {en} } @inproceedings{SchmidFritzMottok, author = {Schmid, Michael and Fritz, Florian and Mottok, J{\"u}rgen}, title = {Parallel Programming in Real-Time Systems}, series = {Architecture of computing systems - ARCS 2019, 32nd international conference, Copenhagen, Denmark, May 20-21, 2019, proceedings}, booktitle = {Architecture of computing systems - ARCS 2019, 32nd international conference, Copenhagen, Denmark, May 20-21, 2019, proceedings}, publisher = {VDE-Verlag}, address = {Berlin}, abstract = {The enormous amounts of data modern real-time systems have to process lead to expensive, long-lasting calculations. In order to manage those computations in a timely manner, parallel task models have gained a lot of popularity lately. However, parallel programming can be very cumbersome and verbose. Other computationally intensive sectors have dealt with parallel computing for decades and have accumulated their experience in the development of parallel frameworks. Examples of well known parallel runtime systems are OpenMP, Intel Threading Building Blocks (TBB) and Microsoft Parallel Pattern Library (PPL). These runtime systems allow developers to enhance parallelism in their applications in a straightforward fashion. However, those parallel frameworks and the patternbased interfaces they provide might not be easily applicable in real-time systems. In this paper, we investigate the use of parallel programming frameworks in time-critical systems. On that account, we discuss considerations for the design of real-time applications that make use of such parallel runtime systems. Furthermore, we evaluate three library-based frameworks from different computing sectors, namely Intel Threading Building Blocks, Embedded Multicore Building Blocks (EMBB) and High Performance ParalleX (HPX), by conducting benchmarks of various parallel algorithms on an embedded multicore architecture.}, language = {en} } @inproceedings{HauserSchreistetterReuteretal., author = {Hauser, Florian and Schreistetter, Stefan and Reuter, Rebecca and Mottok, J{\"u}rgen and Gruber, Hans and Holmqvist, Kenneth and Schorr, Nick}, title = {Code reviews in C++: Preliminary results from an eye tracking study}, series = {ETRA '20 Short Papers: ACM Symposium on Eye Tracking Research and ApplicationsJune 2020}, booktitle = {ETRA '20 Short Papers: ACM Symposium on Eye Tracking Research and ApplicationsJune 2020}, isbn = {ISBN 9781450371346}, doi = {10.1145/3379156.3391980}, pages = {1 -- 5}, abstract = {Code reviews are an essential part of quality assurance in modern software projects. But despite their great importance, they are still carried out in a way that relies on human skills and decisions. During the last decade, there have been several publications on code reviews using eye tracking as a method, but only a few studies have focused on the performance differences between experts and novices. To get a deeper understanding of these differences, the following experiment was developed: This study surveys expertise-related differences in experts', advanced programmers', and novices' eye movements during the review of eight short C++ code examples, including correct and erroneous codes. A sample of 35 participants (21 novices, 14 advanced and expert programmers) were recruited. A Tobii Spectrum 600 was used for the data collection. Measures included participants' eye movements during the code review, demographic background data, and cued retrospective verbal comments on replays of their own eye movement recordings. Preliminary results give proof for experience-related differences between participants. Advanced and expert programmers performed significantly better in case of error detection and the eye tracking data implies a more efficient reviewing strategy.}, language = {en} } @inproceedings{GschossmannJobstMottoketal., author = {Gschossmann, Andreas and Jobst, Simon and Mottok, J{\"u}rgen and Bierl, Rudolf}, title = {A Measure of Confidence of Artificial Neural Network Classifiers}, series = {ARCS Workshop 2019; 32nd International Conference on Architecture of Computing Systems, 20-21 May 2019, Copenhagen, Denmark}, booktitle = {ARCS Workshop 2019; 32nd International Conference on Architecture of Computing Systems, 20-21 May 2019, Copenhagen, Denmark}, publisher = {VDE-Verlag}, address = {Berlin}, pages = {153 -- 157}, abstract = {Confidence in results of an Artificial Neural Networks (ANNs) is increased by preferring to reject data, that is not trustful, instead of risking a misclassification. For this purpose a model is proposed that is able to recognize data, which differs significantly from the training data, during inference. The proposed model observes all activations of the hidden layers, as well as input and output layers of an ANN in a grey-box view. To make ANNs more robust in safety critical applications, this model can be used to reject flawed data, that is suspected to decrease the accuracy of the model. If this information is logged during inference, it can be used to improve the model, by training it specifically with the missing information. An experiment on the MNIST dataset is conducted and its results are discussed.}, language = {en} } @inproceedings{HauserStarkMottoketal., author = {Hauser, Florian and Stark, Theresa and Mottok, J{\"u}rgen and Gruber, Hans and Reuter, Rebecca}, title = {Deliberate Practice in Programming: How is it carried out by programmers?}, series = {ECSEE '20: Proceedings of the 4th European Conference on Software Engineering Education, Seeon, Germany, June 2020}, booktitle = {ECSEE '20: Proceedings of the 4th European Conference on Software Engineering Education, Seeon, Germany, June 2020}, isbn = {ISBN 9781450377522}, doi = {10.1145/3396802.3396815}, pages = {42 -- 46}, abstract = {This work in progress study examines through which activities programmers perform deliberate practice to improve their own skills in coding and programming. For this reason, a qualitative questionnaire was developed and conducted with a sample of 22 participants. The results indicate that programmers perform formal and informal forms of training and learning. Typically, a classical programming training in the context of a university course or for work-related reasons is a first step in the acquisition of expertise. Building on these basic skills, non-formal and informal learning activities are carried out by the learners. Especially the social interaction and the collaborative work with other programmers is of great importance in this context. The activities mentioned by the test persons fulfil the characteristics of deliberate practice and will be examined more closely in a further study.}, language = {en} } @inproceedings{GruberWolffMottoketal., author = {Gruber, Hans and Wolff, Christian and Mottok, J{\"u}rgen and Bazo, Alexander and Hauser, Florian and Schreistetter, Stefan}, title = {Tutorial on Software Engineering Education in Co-Located Multi-User Eye-Tracking-Environments}, series = {Proceedings of the 32nd IEEE Conference on Software Engineering Education and Training: Munich, November 2020}, booktitle = {Proceedings of the 32nd IEEE Conference on Software Engineering Education and Training: Munich, November 2020}, doi = {10.1109/CSEET49119.2020.9206170}, abstract = {We briefly describe a tutorial on the application of Eye-Tracking technology for Software Engineering Education. We will showcase our setup of a large-scale Eye-Tracking-Classroom and its usage for real-time improvement of traditional learning scenarios in Software Engineering Education. We will focus on the integration of gaze data into modern integrated development environments (IDEs) and demonstrate a complete workflow for its usage in co-located multi-user Eye-Tracking-Environments.}, language = {en} } @inproceedings{ReuterStarkSedelmaieretal., author = {Reuter, Rebecca and Stark, Theresa and Sedelmaier, Yvonne and Landes, Dieter and Mottok, J{\"u}rgen and Wolff, Christian}, title = {Insights in Students' Problems during UML Modeling}, series = {2020 IEEE Global Engineering Education Conference (EDUCON): Proceedings}, booktitle = {2020 IEEE Global Engineering Education Conference (EDUCON): Proceedings}, doi = {10.1109/EDUCON45650.2020.9125110}, pages = {592 -- 600}, abstract = {UML (Unified Modeling Language) is the current de facto as well as de jure standard (ISO/IEC 19505:2012) notation to visualize models in software development. UML provides essential guidelines and rules to visualize and understand complex software systems. This is the reason why it has become part of curricula for software engineering courses at many universities worldwide. It is well known, however, that UML is hard to grasp for novices, mainly due to its complexity. In order to tackle the problem of teaching UML to novice students appropriately, it is inevitable to understand their needs and problems much better than we do now. This paper presents empirical insights into students' problems when developing common UML diagrams. Identified problems are generalized, giving rise to a problem catalogue that is derived from our empirical findings, thus establishing a basis for addressing these problems through focused learning arrangements.}, language = {en} } @inproceedings{RennerPozzobonMottok, author = {Renner, Sebastian and Pozzobon, Enrico and Mottok, J{\"u}rgen}, title = {A Hardware in the Loop Benchmark Suite to Evaluate NIST LWC Ciphers on Microcontrollers}, series = {Information and Communications Security: 22nd International Conference, ICICS 2020, Copenhagen, Denmark, August 24-26, 2020, Proceedings}, booktitle = {Information and Communications Security: 22nd International Conference, ICICS 2020, Copenhagen, Denmark, August 24-26, 2020, Proceedings}, editor = {Meng, Weizhi}, publisher = {Springer}, address = {Cham}, doi = {10.1007/978-3-030-61078-4_28}, pages = {495 -- 509}, abstract = {The National Institute of Standards and Technology (NIST) started the standardization process for lightweight cryptography algorithms in 2018. By the end of the first round, 32 submissions have been selected as 2nd round candidates. NIST allowed designers of 2nd round submissions to provide small updates on both their specifications and implementation packages. In this work, we introduce a benchmarking framework for evaluating the performance of NIST Lightweight Cryptography (LWC) candidates on embedded platforms. We show the features and application of the framework and explain its design rationale. Moreover, we provide information on how we aim to present up-to-date performance figures throughout the NIST LWC competition. In this paper, we present an excerpt of our software benchmarking results regarding speed and memory requirements of selected ciphers. All up-to-date results, including benchmarking different test cases for multiple variants of each 2nd round algorithm on five different microcontrollers, are periodically published to a public website. While initially only the reference implementations were available, the ability of automatically testing the performance of the candidate algorithms on multiple platforms becomes especially relevant as more optimized implementations are developed. Finally, we show how the framework can be extended in different directions: support for more target platforms can be easily added, different kinds of algorithms can be tested, and other test metrics can be acquired. The focus of this paper should rather lay on the framework design and testing methodology than on the current results, especially for reference code.}, language = {en} } @inproceedings{DentgenRennerMottok, author = {Dentgen, Manuel and Renner, Sebastian and Mottok, J{\"u}rgen}, title = {Equally Distributed Bus-Communication Access Rights for Inter MCU Communication Using Multimaster SPI}, series = {Architecture of Computing Systems - ARCS 2020: 33rd international conference, Aachen, Germany, May 25-28, 2020, proceedings}, booktitle = {Architecture of Computing Systems - ARCS 2020: 33rd international conference, Aachen, Germany, May 25-28, 2020, proceedings}, editor = {Brinkmann, Andr{\´e} and Karl, Wolfgang and Lankes, Stefan and Tomforde, Sven and Pionteck, Thilo and Trinitis, Carsten}, doi = {10.1007/978-3-030-52794-5_15}, pages = {200 -- 212}, abstract = {With the rising complexity and processing power of modern computer systems, the amount of MCU on a single PCB also rises. These microcontrollers often need to communicate with each other to exchange payload and control information in a bidirectional manner. Today's well-established communication protocols in MCUs either do not fit modern transmission speed requirements or do have an inappropriate master-slave attribute, which does not allow the communication partners to have equal bus access rights. Therefore, this paper introduces an extension of the Serial Peripheral Interface (SPI) to allow an equally distributed access right for the communication interface between two microcontrollers. It simultaneously does fit modern transmission speed requirements of a common network interface, so that the message transmission does not constitute a bottleneck in data processing. Besides the protocol design, we do also provide a first prototype implementation, which constitutes a proof of concept.}, language = {en} } @inproceedings{KloppGoldVeerkampAbkeetal., author = {Klopp, Marco and Gold-Veerkamp, Carolin and Abke, J{\"o}rg and Borgeest, Kai and Reuter, Rebecca and Jahn, Sabrina and Mottok, J{\"u}rgen and Sedelmaier, Yvonne and Lehmann, Alexander and Landes, Dieter}, title = {Totally Different and yet so Alike: Three Concepts to Use Scrum in Higher Education}, series = {Proceedings of the 4th European Conference on Software Engineering Education (ECSEE '20): June 2020, Seeon/Bavaria, Germany}, booktitle = {Proceedings of the 4th European Conference on Software Engineering Education (ECSEE '20): June 2020, Seeon/Bavaria, Germany}, doi = {10.1145/3396802.3396817}, pages = {12 -- 21}, abstract = {Software process models are important in software projects in order to give the work of a project guidelines or a framework. However, teaching process models in higher education seems to be quite challenging. This has to do with the fact that undergraduates have no experience with projects in which process models are used. The theoretical mediation of process models is initially on a very abstract level. For this reason, we chose to combine two didactic approaches, namely problem-based learning and project work. Various traditional plan-driven process models have been expanded in courses in Software Engineering with agile process models. The Scrum Framework is the focus of consideration of this paper. Three Universities of Applied Sciences which cooperate in the EVELIN project focused on Scrum as a process model and integrated it into their teaching. Since the respective concepts of implementation differ, they should be presented and compared in this article to presents some practice approaches. The goal of this presentation of is a uniform evaluation in order to obtain insights from different perspectives. This comparison can draw conclusions for possible necessary improvements of the respective concepts.}, language = {en} } @inproceedings{SeebauerJahnMottok, author = {Seebauer, Stefan and Jahn, Sabrina and Mottok, J{\"u}rgen}, title = {Learning from Escape Rooms? A Study Design Concept Measuring the Effect of a Cryptography Educational Escape Room}, series = {2020 IEEE Global Engineering Education Conference (EDUCON): 27-30 April 2020, Porto, Portugal}, booktitle = {2020 IEEE Global Engineering Education Conference (EDUCON): 27-30 April 2020, Porto, Portugal}, doi = {10.1109/EDUCON45650.2020.9125333}, pages = {1684 -- 1685}, abstract = {Experts predict that more IT-Security specialists will be needed in the coming years, but in current higher education in engineering disciplines, this topic is hardly addressed. Newer learning methods such as game-based learning (GBL) are enjoying an increasing popularity as their improvement in the education of subject specific topics can be proven by a variety of studies. We chose Educational Escape Rooms (EduER) as a GBL-tool to impart IT-Security in higher education of engineers. In our Escape Room (ER), the students try to solve puzzles and riddles with learned knowledge on the emphasis of cryptography. This paper first deals with a brief introduction to GBL and EduERs, followed by the design of our ER concept, containing different tasks with focus on the topic of cryptography. The tasks cover different cryptographic methods and hash algorithms, e.g. AES, RSA, SHA3. Afterwards the experimental study is presented. The study of the EduER was carried out with students from the bachelor's program in Electrical Engineering and Information Technology at the OTH Regensburg. The participants were divided into three groups of 5 to 8 persons each. They received a briefing with important information, followed by the ER execution, a debriefing afterwards and an exam-like evaluation sheet to test their learned knowledge. Finally, first basic results are presented.}, language = {en} } @inproceedings{JahnMottok, author = {Jahn, Sabrina and Mottok, J{\"u}rgen}, title = {Work in Progress: Towards an Academic Secure Software Engineering Curriculum for Engineers}, series = {2020 IEEE Global Engineering Education Conference (EDUCON): 27-30 April 2020, Porto, Portugal}, booktitle = {2020 IEEE Global Engineering Education Conference (EDUCON): 27-30 April 2020, Porto, Portugal}, doi = {10.1109/EDUCON45650.2020.9125210}, pages = {1713 -- 1717}, abstract = {In the age of the Internet of Things, it is becoming increasingly important to integrate knowledge about the development of secure systems (Secure Software Engineering) into academic teaching. However, teaching IT Security and Secure Software Engineering to non-computer scientists is rare. Therefore, we focus our research on the integration of IT Security into software engineering education of non-computer scientists, particularly electrical engineers, by means of inductive teaching- and learning-arrangements. After collecting students' preconceptions of IT Security and Secure Software Engineering in prior work, this paper now contributes with a first mapping of these preconceptions with corresponding learning content as well as suitable inductive teaching methods to be able to create new lecture and exercise units and improve academic learning and teaching in both areas.}, language = {en} } @inproceedings{FrauenschlaegerRennerMottok, author = {Frauenschl{\"a}ger, Tobias and Renner, Sebastian and Mottok, J{\"u}rgen}, title = {Security Improvements by Separating the Cryptographic Protocol from the Network Stack onto a Multi-MCU Architecture}, series = {Architecture of Computing Systems - ARCS 2020: 33rd international conference, Aachen, Germany, May 25-28, 2020, proceedings}, booktitle = {Architecture of Computing Systems - ARCS 2020: 33rd international conference, Aachen, Germany, May 25-28, 2020, proceedings}, publisher = {Springer International Publishing}, doi = {10.1007/978-3-030-52794-5_14}, pages = {185 -- 199}, abstract = {The number of IoT devices in SCADA and ICS systems is rising quickly, especially in the domain of critical infrastructures. But these kinds of systems are performing mission critical tasks like controlling devices in industrial facilities or substations in the smart grid. Therefore, they are subject to a lot of regulatory standards. Yet, to provide remote access over the internet, special architectures are developed to integrate a network interface into these devices without inferring with the actual functionality. However, these architectures either lack security measures against cyber-attacks or do not offer the necessary performance for time-critical communication interfaces. To solve that, an architecture consisting of three units is introduced in this paper to provide a network interface with extensive security measures and a high performance. The main feature is the isolation of the cryptographic functionality onto an additional MCU. After proposing the basic concept, the paper presents many implementation details. Based on the current state of implementation, a concept validation of the realized architecture is described.}, language = {en} } @inproceedings{FrauenschlaegerDentgenMottok, author = {Frauenschl{\"a}ger, Tobias and Dentgen, Manuel and Mottok, J{\"u}rgen}, title = {Systemarchitektur eines Sicherheitsmoduls im Energiesektor}, series = {Tagungsband 2. Symposium Elektronik und Systemintegration ESI 2020: "Intelligente Systeme und ihre Komponenten: Forschung und industrielle Anwendung"}, booktitle = {Tagungsband 2. Symposium Elektronik und Systemintegration ESI 2020: "Intelligente Systeme und ihre Komponenten: Forschung und industrielle Anwendung"}, address = {Landshut}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:860-opus4-2092}, pages = {29 -- 38}, abstract = {Aufgrund der immer weiter anwachsenden Vernetzung der Stromnetze wird die Kommunikation zwischen der Leitstelle des Energieversorgers und den Infrastrukturkomponenten innerhalb eines Umspannwerks immer bedeutsamer. Dabei werden sowohl Steuerbefehle als auch Daten f{\"u}r {\"U}berwachungsfunktionen {\"u}bertragen. In den aktuellen Netzwerkarchitekturen findet diese Kommunikation ohne eine kryptografische Absicherung statt, was einen Angriffspunkt f{\"u}r gezielte Attacken und damit eine potenzielle Gef{\"a}hrdung der Energieversorgung darstellt. Um solchen Angriffen in Zukunft entgegenzuwirken, wird das ES³M-Sicherheitsmodul entwickelt. Dieses soll in das Netzwerk zwischen den beiden Kommunikationspartnern eingesetzt werden und so den Datenverkehr absichern. Mithilfe einer Bedrohungsanalyse wurden Anforderungen abgeleitet, die neben kryptografischen Maßnahmen auch Themen wie funktionale Sicherheit und Langlebigkeit umfassen. Um diese zu erf{\"u}llen, wurde eine spezielle Systemarchitektur auf Basis einer Aufgabenteilung entworfen. Diese Architektur und korrespondierende Designentscheidungen werden pr{\"a}sentiert.}, language = {de} } @inproceedings{InderwiesMottok, author = {Inderwies, Tom and Mottok, J{\"u}rgen}, title = {Secure Software Update of a Secure Module in the Power Grid}, series = {Proceedings of the Regensburg Applied Research Conference 2020 (RARC 2020), July 31st}, booktitle = {Proceedings of the Regensburg Applied Research Conference 2020 (RARC 2020), July 31st}, pages = {25 -- 31}, language = {en} } @inproceedings{WeissRennerMottoketal., author = {Weiss, Nils and Renner, Sebastian and Mottok, J{\"u}rgen and Matoušek, V{\´a}clav}, title = {Transport Layer Scanning for Attack Surface Detection in Vehicular Networks}, series = {CSCS '20: Computer Science in Cars Symposium}, booktitle = {CSCS '20: Computer Science in Cars Symposium}, number = {7}, address = {Feldkirchen}, doi = {10.1145/3385958.3430476}, pages = {1 -- 8}, abstract = {In the beginning of every security analysis or penetration test of a system, information about the target has to be gathered. On IT-Systems a port scan is usually performed as a first step of an investigation. Since the communication protocols differ in automotive systems, generic port scanning tools can't be used for a security analysis of CANs. More complex protocols have a higher likelihood of implementation errors and bugs. On CAN networks, such payloads are transferred through International Standard Transport Protocol (ISO-TP) communication. We designed a new methodology to identify ISO-TP endpoints in automotive networks. Every of these endpoints can provide exploitable application layer protocols and therefor has to be considered during penetration testing and security analysis. We contribute a new scan approach for the automated evaluation of possible attack surfaces in automotive CAN networks which has a higher coverage and multiple advantages than state of the art approaches.}, language = {en} } @inproceedings{FritzSchmidMottok, author = {Fritz, Florian and Schmid, Michael and Mottok, J{\"u}rgen}, title = {Accelerating Real-Time Applications with Predictable Work-Stealing}, series = {Architecture of computing systems - ARCS 2020: 33rd international conference, Aachen, Germany, May 25-28, 2020, proceedings}, booktitle = {Architecture of computing systems - ARCS 2020: 33rd international conference, Aachen, Germany, May 25-28, 2020, proceedings}, editor = {Brinkmann, Andr{\´e}}, doi = {10.1007/978-3-030-52794-5_18}, pages = {241 -- 255}, abstract = {Modern compute architectures often consist of multiple CPU cores to achieve their performance, as physical properties put a limit on the execution speed of a single processor. This trend is also visible in the embedded and real-time domain, where programmers are forced to parallelize their software to keep deadlines. Additionally, embedded systems rely increasingly on modular applications, that can easily be adapted to different system loads and hardware configurations. To parallelize applications under these dynamic conditions, often dispatching frameworks like Threading Building Blocks (TBB) are used in the desktop and server segment. More recently, Embedded Multicore Building Blocks (EMB2) was developed as a task-based programming solution designed with the constraints of embedded systems in mind. In this paper, we discuss how task-based programming fits such systems by analyzing scheduler implementation variants, with a focus on classic work-stealing and the libraries TBB and EMB2. Based on the state of the art we introduce a novel resource-trading concept that allows static memory allocation in a work-stealing runtime holding strict space and time bounds. We conduct benchmarks between an early prototype of the concept, TBB and EMB2, showing that resource-trading does not introduce additional runtime overheads, while unfortunately also not improving on execution time variances.}, language = {en} } @misc{Rauch, type = {Master Thesis}, author = {Rauch, Johannes}, title = {Entwicklung eines Regelverfahrens f{\"u}r einen optimierten und zentralen Blindleistungsabruf zur Beeinflussung des Blindleistungshaushalts von Mittelspannungsnetzen unter Einhaltung von Netzrestriktionen}, doi = {10.35096/othr/pub-659}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-6595}, school = {Ostbayerische Technische Hochschule Regensburg}, pages = {115}, abstract = {Die Energiewende f{\"u}hrt zu neuen Herausforderungen f{\"u}r Verteilungsnetzbetreiber hinsichtlich der Er-bringung von Systemdienstleistungen, der Integration weiterer Erzeugungsanlagen und Lasten sowie der Gew{\"a}hrleistung einer hohen Versorgungssicherheit und normgerechten Spannungsqualit{\"a}t. Die De-ckung der auftretenden Blindleistungsbedarfe seitens der Netzbetriebsmittel, Verbraucher und Erzeu-gungsanlagen gewinnt durch den Wegfall der Großkraftwerke f{\"u}r Netzbetreiber zunehmend an Bedeu-tung. Das Projekt SyNErgie besch{\"a}ftigt sich diesbez{\"u}glich mit der Entwicklung neuartiger Blindleis-tungsmanagementsysteme f{\"u}r Mittelspannungsnetze. Ziel ist es, das bisher ungenutzte, freie Blindleis-tungspotential betrieblicher Kompensationsanlagen und dezentraler Erzeugungsanlagen (allgemein: Blindleistungsquellen) zu nutzen, um die Blindleistungs{\"a}nderungsf{\"a}higkeit eines Verteilungsnetzes zu erh{\"o}hen. Diese Arbeit besch{\"a}ftigt sich mit der Entwicklung eines zentralen Blindleistungsregelsystems, bei dem Blindleistungsquellen auf Basis von „Optimal Power Flow"-Berechnungen {\"u}ber eine zentrale Recheninstanz angesteuert werden. Zum Einsatz kommt dabei ein Optimierungsalgorithmus, der auf Basis des aktuellen Netzzustandes (Spannungs- und Auslastungsreserven) und des aktuellen Blindleis-tungspotentials der Blindleistungsquellen einen bedarfsoptimalen Abruf koordiniert. Das zentrale Re-gelverfahren wird in Netzmodellen verschiedenartiger Mittelspannungsnetzgruppen und unterschiedli-cher Art und Anzahl von Blindleistungsquellen angewendet sowie im Hinblick auf variierende Zielvor-gaben und Randbedingungen evaluiert und diskutiert.}, language = {de} } @misc{OPUS4-641, title = {Regensburger Applied Research Conference 2020 (RARC 2020), July 31st}, editor = {Mottok, J{\"u}rgen and Ehrlich, Ingo and Haumer, Anton}, address = {Regensburg}, organization = {RARC <2020, Regensburg>}, doi = {10.35096/othr/pub-641}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:898-opus4-6417}, pages = {184}, abstract = {The Applied Research Conference which is held every year at another University of Applied Sciences in Bavaria is the main event for all students in the Master of Applied Research program. They come together to present their work in oral presentations and full papers, which are published in the proceedings, as well as poster presentations of the students after their 1st semester. For sure it is interesting for Professors and interested people to see the results of upcoming scientists and researchers. Due to the Corona pandemic, this year it is not possible to organize the conference as usual in presence. We have to refrain from face-to-face discussions, having together a cup of coffee. We as Professors at the OTH Regensburg wanted to give our students the chance to finish this semester successfully - despite all limitations due to the pandemic situation. Therefore we decided to organize the RARC 2020 - Regensburg Applied Research Conference 2020 - for the Master of Applied Research students of OTH Regensburg as an online conference. However, for a Technical University the situation is rather a challenge than a problem. Using a variety of online tools for teaching during this semester, we have enough experience to find a setup for RARC2020. We received 28 submissions for full papers, which were peer reviewed and 26 of them were accepted - you will find them in this proceedings, and they will be presented orally on July 31st, 2020. Additionally, there are 22 posters which will be presented on the same day. During the Plenary Opening Session, after a welcome by our President Prof. Dr. Wolfgang Baier we will have 3 Keynote speakers: Prof. Dr. phil. habil. Karsten Weber: Erkenntnistheorie f{\"u}r Ingenieure Prof. em. Georg Scharfenberg: 11 Years Master of Applied Research Alumnis Veronika Fetzer: Entrepreneurship}, language = {en} } @inproceedings{Fuhrmann, author = {Fuhrmann, Thomas}, title = {Let the students publish}, series = {IEEE International Conference on Teaching, Assessment and Learning for Engineering (TALE), 26-29 August 2013, Bali Dynasty Resort, Kuta, Indonesia}, booktitle = {IEEE International Conference on Teaching, Assessment and Learning for Engineering (TALE), 26-29 August 2013, Bali Dynasty Resort, Kuta, Indonesia}, publisher = {IEEE}, isbn = {978-1-4673-6355-6}, doi = {10.1109/TALE.2013.6654515}, abstract = {In technical study programs on the bachelor level the focus is mainly directed on the scientific education in theory and practice. Publication is usually started during the PhD phase when students write their first scientific papers. During the last years some very successful projects were made at the university of applied sciences Regensburg to motivate bachelor students doing their first own small publications. The results of these projects are presented in this paper and ideas how students can publish are given.}, language = {en} } @misc{Weiss, author = {Weiss, Nils}, title = {Reverse Engineering and Weaponizing OBD Dongles}, series = {Automotive Security Research Group, Stuttgart, Germany 2019, Meeting 22}, journal = {Automotive Security Research Group, Stuttgart, Germany 2019, Meeting 22}, language = {de} } @inproceedings{WestnerFuhrmannWaasetal., author = {Westner, Markus and Fuhrmann, Thomas and Waas, Thomas and Skelton, David}, title = {Internationalization of a Computer Science Faculty}, series = {9th Annual International Conference on Computer Science Education: Innovation and Technology (CSEIT 2018), 2018, Singapore}, booktitle = {9th Annual International Conference on Computer Science Education: Innovation and Technology (CSEIT 2018), 2018, Singapore}, doi = {10.5176/2251-2195_CSEIT18.118}, pages = {33 -- 38}, abstract = {The paper at hand describes how a regional university of applied sciences tried to internationalize its learning and teaching environment. It describes the challenges encountered, the managerial approach taken, illustrates the implemented initiatives, and how effective they turned out. The results might be relevant to faculty staff in managerial positions at regional universities all over the world that face the challenge to internationalize their teaching and learning environment for the benefit of their domestic students.}, subject = {Internationalisierung}, language = {en} }